Dynamic text blurry when preloader is used

I've put the skeleton of something here:
http://www.leetilford.com/tests/portfolio.html
Note the crisp type up front. Choose a category (bathroom or
dining for instance) and see that the dynamically loaded type
becomes blurry.
This only happened when I used a preloader to load the
category swfs, anyone know why?
The crispness of the Portfolio type is how they all render
when no preloader is used.
Baffling?

Yes. I just deleted all text boxes (including buttons) and
made
sure all boxes were set to static, anti-alias. But, that kept
me from needing to embed.
I had embedded the fonts before.
The files are clones of the portfolio.swf which comes up
nicely. However,
that one is not preloaded.
This is what I'm using for a preloader:
stop();
//-------------preloader------
//make the preloader bar not appear "full" right away
bar_mc._xscale = 0;
//load Movie into level 1
loadMovieNum("exterior.swf", 1);
//note the movie to load has a blank first frame.
onEnterFrame = function () {
_level1.stop();
// get the bytes of Level 1 and make into a percent
percent =
Math.ceil((_level1.getBytesLoaded()/_level1.getBytesTotal())*100);
//use the percent to determine the xscale of the preloader
bar.
bar_mc._xscale = percent;
// if loaded play level1
if (percent>99) {
//note you MUST delete onEnterFrame otherwise it
//will continue to run.
this._visible=false;
delete this.onEnterFrame;
_level1.gotoAndPlay(2);

Similar Messages

  • Problm in dynamic text field when i view it in IE

    Hi
    i have used dynamic text field for UI Lebels, text is comming
    from xml file.i have TextFormat as well .
    when i publish and see out put in swf file it is looking good
    and all the text in the same place where i have placed it. but if i
    see it in IE browser.
    all text is moved littile bit as well as its not taking
    formating of the text .. means if i have used Arial bold 10 .. but
    is not showing bold ...
    can any body help on this issue

    It is a very simple to solve issue:
    There is a line break in your CSS code on the main page in the background image url.
    Current Firefox versions do not like that.
    <code>body {
    background:#000000 url("http://lh4.ggpht.com/_fKjKe5YUrXg/SjKITFBNaxI/AAAAAAAADWI/u5ohtFDhVc0/black-%20lighter.jpg
    background-position: down-left;
    background-attachment: fixed;
    background-repeat: no-repeat;
    margin:0;
    color:#E895CC;
    font: x-small "Trebuchet MS", Trebuchet, Verdana, Sans-serif;
    font-size/* */:/**/small;
    font-size: /**/small;
    text-align: center;
    </code>
    This should fix it:
    <code>body {
    background:#000000 url("http://lh4.ggpht.com/_fKjKe5YUrXg/SjKITFBNaxI/AAAAAAAADWI/u5ohtFDhVc0/black-%20lighter.jpg");
    background-position: down-left;
    background-attachment: fixed;
    background-repeat: no-repeat;
    margin:0;
    color:#E895CC;
    font: x-small "Trebuchet MS", Trebuchet, Verdana, Sans-serif;
    font-size/* */:/**/small;
    font-size: /**/small;
    text-align: center;
    </code>

  • Dynamic text in PI Alerts without using BPM

    Hello everyone,
    Is it possible to have dynamic text in alert mail subject or mail details without using BPM in PI?
    If I want to configure generic single alert category for all interfaces in my project , and in the subject line of Alert mail, I need to have the Interface ID (unique identifier for that interface) or integration directory scenario name for which this alert has been raised, then is it possible to use some custom alert container for this purpose?  Or is there any other way to have these dynamic texts ?
    We are using PI7.1 in project landscape.
    Thanks in advance,
    Minal

    Hi,
    >>I need to have the Interface ID (unique identifier for that interface) or integration directory scenario name for which this alert has been raised
    those two are not available in the container:
    http://help.sap.com/saphelp_nwpi71/helpdata/en/d0/d4b54020c6792ae10000000a155106/content.htm
    Regards,
    Michal Krawczyk

  • Dynamic text shifts when style changes

    I have some dynamic text fields that are set up so that when
    you rollover them (actually a button behind them), their formatting
    changes. This is done with some basic actionscripting, setting up 2
    different text format variables and attaching one or the other to
    the text field when a button is rolled over. The only thing that
    changes is color. When the text first appears all is well. But when
    you rollover the text and the color changes, on certain browsers an
    extra space can get inserted at the beginning of a new line, sort
    of like the old bug where text wrapping messes up and moves a space
    down to the beginning of a line. This happens on IE 6 and 7 and
    Safari, not Firefox. The player is 9. THanks.

    Did not, I was happier with the browser's display than with
    the embedded font version. May try it just to see if problem
    remains. Seems like something I should be able to avoid without
    having to embed though.

  • Dynamic text disappears when clicking bold button.

    Dear friends,
    I have dynamic text inside a movieclip, that I can make it rotate.
    the dynamic text properties are : anti-alias for anmations and I emdedded all characters.
    When I click on the bold button the the text disappears.
    bold_btn.addEventListener(MouseEvent.Click, on_bold);
    function on_bold(e:MouseEvent):void
         var my_format:TextFormat = new TextFormat();
         my_format.bold = true;
         my_mc.my_txt.setTextFormat(my_format);
    How can I solve this problem.

    the easiest (and not very elegant way) is to add textfields that contain those fonts (and embed them).  you can remove your textfields from the display list or otherwise, make them not visible on-stage.

  • Dynamic text resizes when loaded?

    I made sure to set the stage to noScale but I am still having
    a strange problem that is driving my nuts. If I make a static text
    box it will not resizing when I compile and preview or upload the
    swf. However, if I make a dynamic text box, the text size increases
    slightly when i complile the swf. This makes fine tuning the layout
    of web pages extremely difficult because what i see on the stage is
    not the same size as what i see when the swf is complied. Has any
    one else had this problem or know how to solve it because its
    really starting to drive me nuts?

    The only time you should see a size difference is when you
    take text out of a movie clip that has been scaled. Hit Crtl-t to
    get the Transform window and see if the object is %100

  • I took a text picture when I was using the keyboard where did the picture go?

    I took a text picture when using the keyboard where did the pictures go

    Is your question related to Adobe Reader on Android? Could you please elaborate more?
    Thanks,
    Adobe Reader Team

  • Text blurry when converted to flash video

    I've been exporting my movies from FCP as 8 bit uncompressed to use as a master for converting to flash via the Flash 8 encoder.
    The resulting images look great except for text on title cards that were created with text generator in FCP.
    I've done numerous tests at various settings, but the text, after the Flash encoding, never looks pristine as it does in QT.
    Any suggestions?
    Thanks.

    I don't think you're gaining anything by exporting a DV sequence to uncompressed 8 bit. If you want to improve things, try editing in a ProRes sequence instead from the get go. 10 bit color, and it should play the DV in RT without having to render it as long as your computer is fast enough. But when you recompress a DV seqence to something else, you really can only lose quality. You can't get better by upcoverting the DV, but your titles will look better in 10 bit prores. Keep in mind that once you create something (say a title) in a DV sequnece, it becomes just that... so if you were to create the title in a ProRes 10 bit sequence, theory says that it should look better.
    Also FWIW, the Boris Title 3D titler is vector based, not bit-mapped like the text tools are. So it should look nicer all around.
    Jerry

  • Dynamic text box, HTML Text with Image

    Hello Everyone,
    I am using Flash version 8. I have used the text tool and
    created a dynamic text box and have attached the UIScrollBar
    component to it. This text box is configured to allow the use of
    html text to be inputted to it. I have code that reads a file which
    contains a list of text files that I then read and place them into
    the text box. The user can use the scroll bar to scroll through all
    the text.
    I have created an image that is a picture of the tab portion
    of a file folder. On the tab I have place some text. This was all
    done in Photoshop. This tab image is used to separate the different
    stories in the text box. The image is save as a jpeg file
    Everything you have just read works with out any problems.
    Now for the problem!
    This image is only 20 pixels tall and the text is not very
    readable. As we all know the HTML tags are very limited in Flash 8.
    Ideally I would like to put the text and image in to the text
    box as I would normally do. Then place text on top of the image and
    have it all scroll properly with in the text box.
    I have taken the tab image and converted it in to a graph
    symbol and then put the text on top of the image. This looks good;
    however I don’t know how (or if it is even possible) to place
    the graphic symbol in to the text box at the correct place within
    the text.
    Does anyone have ideas on what may work? Remember that the
    image I am working with is only 20 pixels tall which is why the
    text quality on the image is so poor.
    Thank you all for any help you may provide,
    Steve

    Yes Tim I am using the <img> tag and I know that I
    can’t place text over the image. I have set the height and
    width to be the exact size of the image. However When you go to the
    webpage it will open the movie to the maximum size based on the
    resolution of your display; however I do maintain the aspect ratio
    of the movie. For testing I did set a fix size to the size of the
    movie. Sometimes the fix size (1000x750) looks better and sometimes
    a larger size (example 1280x1024). I believe that the main problem
    is the fact the size of the image is 670 pixels wide by 25 pixels
    high and of the 25 pixels the text is only 18 pixels tall. In
    Photoshop this makes it about a 1.75 point font. As you can see the
    real problem is that I don’t have enough pixels to make up
    the text. This is why I am looking for an alterative way to create
    the text.
    I tried importing the image into flash as a graphic symbol
    and then using the text tool to create the text. The results looked
    real sharp, the text was nice and crisp (just what I wanted). The
    problem is that I could not find a way to place the graphic symbol
    into the dynamic text area like id did using the <img> tag.
    This symbol needs to scroll as you scroll the text in the text
    area.
    This is why I am asking for help. I am looking for some ideas
    that may work.
    Thank you,
    Steve

  • Dynamic text won't display

    I don't know if this is a bug. I have a movie that contains a
    dynamic text. When I run it, the text displays fine. But when the
    said movie is run through another movie clip (using loadMovie), the
    dynamic text won't display. Any ideas why? Thank you.

    dongzky wrote:
    > Actually, there was no code involved. The dynamic text,
    with borders around it,
    > I tried to put a value for testing. It works fine when
    run. But when called
    > by another movie clip, although the movie with the
    dynamic text still loads,
    > the text won't display anymore. Even the borders were
    gone.
    Than again, it's a bug on your end :)
    Dynamic text is a text container, it's to be use with
    dynamically given data, from
    source file or variable string on timeline. It's not meant to
    be for regular text
    display. You need to use Static text. The fact that you can
    see it it's just flash
    being tolerant but it only lasts for as long as the movie is
    getting more complex.
    You can get away with somethings even tho you should not be
    using them, does not
    mean they will work all the way. Dynamic text, as said above
    is for text that comes
    to flash from outside source and this is when it works best.
    Best Regards
    Urami
    <urami>
    If you want to mail me - DO NOT LAUGH AT MY ADDRESS
    </urami>

  • On button rollover Dynamic text and Movieclip appear

    Hi guys,
    I've got an issue - When one of my buttons is rolled over, I want text and a movieclip to appear. When the button is no longer rolled over, I want the text and movieclip to disappear.
    The way that I was going to do this was to have anchor_mc as an anchor, and upon rollover have the movieclip play from inside the anchor (as its at the exact X & Y that its needed at) and dynamic text appear.
    Questions:
    1) How do I attach mc_textbox to mc_anchor --- OR, how do I set coordinate for just where mc_textbox should show?
    2) How do I then make the movieclip disappear if the button is no longer rolled over?
    3) Is it not possible for me to merge all of the dynamic text functions into one function, using IF statements? I tried this, but couldn't work it out.
    AS3 code is attached below.
    import flash.events.MouseEvent;
    stop();
    line1.addEventListener(MouseEvent.ROLL_OVER, line_in1, false, 0, true);
    line1.addEventListener(MouseEvent.ROLL_OUT, line_out, false, 0, true);
    line2.addEventListener(MouseEvent.ROLL_OVER, line_in2, false, 0, true);
    line2.addEventListener(MouseEvent.ROLL_OUT, line_out, false, 0, true);
    line3.addEventListener(MouseEvent.ROLL_OVER, line_in3, false, 0, true);
    line3.addEventListener(MouseEvent.ROLL_OUT, line_out, false, 0, true);
    line4.addEventListener(MouseEvent.ROLL_OVER, line_in4, false, 0, true);
    line4.addEventListener(MouseEvent.ROLL_OUT, line_out, false, 0, true);
    line5.addEventListener(MouseEvent.ROLL_OVER, line_in5, false, 0, true);
    line5.addEventListener(MouseEvent.ROLL_OUT, line_out, false, 0, true);
    line6.addEventListener(MouseEvent.ROLL_OVER, line_in6, false, 0, true);
    line6.addEventListener(MouseEvent.ROLL_OUT, line_out, false, 0, true);
    line7.addEventListener(MouseEvent.ROLL_OVER, line_in7, false, 0, true);
    line7.addEventListener(MouseEvent.ROLL_OUT, line_out, false, 0, true);
    line8.addEventListener(MouseEvent.ROLL_OVER, line_in8, false, 0, true);
    line8.addEventListener(MouseEvent.ROLL_OUT, line_out, false, 0, true);
    line9.addEventListener(MouseEvent.ROLL_OVER, line_in9, false, 0, true);
    line9.addEventListener(MouseEvent.ROLL_OUT, line_out, false, 0, true);
    function line_in1(e:MouseEvent):void
            line_output.text = "This is a test made by the MonkeyTest that has previously messed up\n        And testing a new line";
    function line_in2(e:MouseEvent):void
            line_output.text = "up messed previously has that MonkeyTest the by made test a is This";
    function line_in3(e:MouseEvent):void
            line_output.text = "This is a test made by the MonkeyTest that has previously messed up\n        And testing a new line";
    function line_in4(e:MouseEvent):void
            line_output.text = "up messed previously has that MonkeyTest the by made test a is This";
    function line_in5(e:MouseEvent):void
            line_output.text = "This is a test made by the MonkeyTest that has previously messed up\n        And testing a new line";
    function line_in6(e:MouseEvent):void
            line_output.text = "up messed previously has that MonkeyTest the by made test a is This";
    function line_in7(e:MouseEvent):void
            line_output.text = "This is a test made by the MonkeyTest that has previously messed up\n        And testing a new line";
    function line_in8(e:MouseEvent):void
            line_output.text = "up messed previously has that MonkeyTest the by made test a is This";
    function line_in9(e:MouseEvent):void
            line_output.text = "up messed previously has that MonkeyTest the by made test a is This";
    function line_out(e:MouseEvent):void
            line_output.text = "";
            var mc= new mc_empty(); addChild(mc);

    It isn't relly clear to me what you have versus what you want, so these answers may be equally unclear to you.
    1. One way to join them together is to maually place one inside the other while authoring the file.  Another way is to use addChild to add the text mc to the anchor...  mc_anchor.addChild(mc_textbox);  To control where the text mc appears you can set its x and y properties.using actionscript... mc_textbox.x = 0;
    2. To make the movieclip disappear you can set its visible property to false... mc_anchor.visible = false;
    3. You can probably reduce that code substantially, though it partly depends on what variations there are really going to be in the text that displays for each rollover.  For now, I'll assume the text will be entirely different for each...
    for(var i:uint=1; i<10; i++){
         this["line"+String(i)].addEventListener(MouseEvent.ROLL_OVER, line_in, false, 0, true);
         this["line"+String(i)].addEventListener(MouseEvent.ROLL_OUT, line_out, false, 0, true);
    function line_in(e:MouseEvent):void {
         var lineTarget:MovieClip = MovieClip(e:currentTarget);
          // could use a switch instead of the if's in series if you know what a switch is
         if(lineTarget == line1){
              // do things for line1
         } else if(lineTarget == line2){
              // do things for line2
         ) else if.... etc

  • Compiler errors when using dynamic text in a class

    I have created a MovieClip with a custom class that has a dynamic text field (called "textArea"), which I want to modify by the Component Inspector, as well as via a custom method using:
    textArea.text = newText;
    It works fine in all cases and there are no problems, but the compiler still wants to give me the error:
    1120: Access of undefined property textArea.
    The error doesn't appear when I remove the component parameters (so that it's just a normal MovieClip). It still works, even with the error, so I'm not sure why it wants to complain. Am I doing something wrong or is it just being bitchy?

    By defining them in the class and using the class name under component definition:
    [Inspectable(name="Text", type=String, defaultValue="")]
    public function set text(setText:String)
         textArea.text = setText;
    public function get text():String
         return textArea.text;
    A problem I run into is that the compiler errors prevent the parameters from being defined so I comment out every line that has to do with textArea, define the component, then uncomment them so that it'll work when it runs.

  • Dynamic Text not loading when browser refreshes

    Hi All,
    For some reason, when the user refreshes the browser, the 'Welcome to our ....' dynamic text in the middle of my swf doesn't load in IE 8. I think this is somehow cache related maybe?
    I'm using a preloading container .swf to load the main movie swf, Interactive_StrategyMap.swf (located here: http://precorp.coop/fileshare/map/Interactive_StrategyMap.swf).
    You can view the behavior here: http://www.precorp.coop/fileshare/map/InteractiveStrategyMap.html
    Any ideas how I can fix this?
    Thanks,
    John

    Ned... Ahh, it appears to be happening to me because I have the Tools/Internet option in IE selected "Check for new version of stored pages" to Automatically.

  • Can we set the dynamic data source when using getReportParameters() ?

    Hello!
    I have a report where one of its parameters refers to a list of values (LOVs). This list of values is an SQL Query type. When the data source used in the report is defined in the BI Publisher server, I'm able to get the report parameters using the getReportParameters() function in my application. However, if the data source is not defined the function throws an exception, which is understandable.
    I decided to dynamically set the data source so that even if the data source used by the report is not defined in the BI Publisher server, it still will be able to get the LOVs for the parameter. I tried setting the JDBCDataSource of the dynamicDataSource for the ReportRequest object that I passed to the getReportParameters() function. Please see the sample code below:
    reportRequest.dynamicDataSource = new BIP10.BIPDataSource();
    reportRequest.dynamicDataSource.JDBCDataSource = new BIP10.JDBCDataSource();
    setReportDataSource(reportRequest.dynamicDataSource.JDBCDataSource, connectstr, jdbc, dc); //function to set the values for JDBCDataSource object
    reportParams = webrs.getReportParameters(reportRequest, uid, pwd); //call the getReportParameters
    I was expecting this to work as this is what I did to dynamically set the data source before calling the runReport function. So, my question is -- can we set the dynamic data source when using getReportParameters() ? I tried this both in versions 10g and 11g. It does not seem to work on both versions.
    Regards,
    Stephanie

    report_id column of apex_application_page_ir_rpt can help us uniquely identify each saved report.
    We can assign this report_id value to a page item and this page item can be put in the Report ID Item text box of the Advanced section of the Report Attributes page of the IR.
    This should load the saved report identified by report_id and you can get rid of javascript
    Regards,
    Vishal
    http://obiee-oracledb.blogspot.com
    http://www.packtpub.com/oracle-apex-4-2-reporting/book
    Kindly mark the reply as helpful/correct if it solves your problem

  • Using dynamic text in Flash Builder

    Hi,
    I'm trying to get some dynamic text to my web page. The text is readed from .txt file
    I use AS script which i was using in a project I made with Flash Pro and now i try to implement it in Flash Builder project
    The script look like this:
    var req:URLRequest = new URLRequest("design_1.txt");
    var loader:URLLoader = new URLLoader();
    function textLoaded(event:Event):void
    design.text = loader.data;
    loader.addEventListener(Event.COMPLETE, textLoaded);
    loader.load(req);
    So first I made a project with Flash Catalyst and in there I created an area text element. Then I imported the project to Flash Builder and put the AS script in the <Script> section and gave the <RichText> an id="design".  The text is just simple text and formatting happens in richtext element.
    So, when i try to compile the FB project it give me and parse error "undefined property error req", "undefined property error loader" etc.
    So should i alter the AS script for FB or is there something else wrong? I tried to google how to use dynamic text in FB but couldn't find any easytyutorials. I'm mostly a desginer so coding isn't my speciality. But thanks for help!

    Hi Amy,
    You can customize 'New class' generation under Preferences->Editors->Flash
    Builder->FileTemplates->Action Script->New ActionScript class.
    Currently there are no template variables available constructors. But you
    can customize it as following,
    $
    ${import_declaration}
    $ {
      public function ${class_name}() {

Maybe you are looking for

  • What are the fields under Time types

    Hi All, could you please help me know how system reacts if the below fields are updated while creating Time types. 1.Save as day balanace 2.Cumulate in Period balance 3.Transfer previous period 4.Transfer pervious year Thanks

  • How much RAM should I upgrade too?

    I recently purchased a 13" MacBook Pro. It is a mid-2012 model. It currently has 4 GB. I connect it to an external monitor which makes it easier for me to use while editing. I always have the application sit and load with the spinning ball icon. I us

  • JDeveloper 10.1.3 - Disabling ns0: namespace prefix in soap body children ?

    I am attempting to use a PeopleSoft web service. However, the PeopleSoft web service does not recognize operations which have a namespace prefix. Using visual studio, namespace prefixes are not used in the child elements of the soap body element. I a

  • Workflow - Purchase order Release strategy

    Hi All, Good Morning I had created workflow for Purchase order release strategy with steps(To Determine Agents, Release of Purchase order, Release of PO effected) and in Me21N I created PO and PO came to my SAP inbox(SBWP) and I released that PO and

  • Error in send-mailmessage command

    Hello, I am executing the powershell command  to send mails from internal SMTP Server but when am executing this command getting error as "Unable to connect to the remote server".I have checked no port blocking this ,no anti virus is installed. the m