Dynamic Variable Package Installs (Not Applications)
My Apps install fine, but I'm not sure where to look to see if all my Packages are as I'm not finding much in the smsts.log.
I believe I have everything configured fine, as its similar to my applications OSD task just with a different base variable.
So for example:
Base variable = PACKAGES
Collection Variable:
PACKAGES001 - 1010007C:Unattended
That is the correct syntax I believe. So which log files can prove what is or isn't installing? I'm installing 9 packages before my 10 apps (apps install fine).
<PackageId>:<ProgramName> should be the correct format, see also:
http://technet.microsoft.com/en-us/library/hh846237.aspx#BKMK_InstallPackage
The global information about the different packages to be installed should be in the smsts.log file and the detailed installation information should be in the execmgr a.log file.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude
Similar Messages
-
AAMEE 3.1 Photoshop package - Installation not possible
Hi,
-successfully created a Photoshop CS6 package with AAMEE 3.1
-starting the Adobe Photoshop CS6.msi with msiexec /i c:\temp\Adobe Photoshop CS6.msi /qn is starting the msi/setup
-Photoshop is not installed
- msi directly started - same proplem
-Logfiles searched for errors - nor error found which tells me what's wrong
-Package 7times new created
-no idea what i can do now
for any help thanks in advance!
Best regards
StefanThe command which you are using is correct but the path which you have mentioned in the command have some space in the folder name. So would recoomend try to add double codes in the path like "c:\temp\Adobe Photoshop CS6.msi".
Here is the command which you can use to install the software silently. - msiexec /i "c:\temp\Adobe Photoshop CS6.msi" /qn
or you can change the directory first in the command prompt and then enter the command : msiexec /i "Photoshop CS6.msi" /qn -
Itunes Package Installer not Installing Apple Mobile Device Support
Okay, so I have unistalled iTunes, removed everything on my computer that apple told me to, then reinstalled iTunes. But I still get the same message when i plug in my iTouch, "This ipod cannot be used because the required software is not installed." Then it tells me to uninstall and then reinstall itunes; well i have done that literally over 10 times. All to the same result: no mobile device support. I called the 1-800 number for apple and was on the phone for over 2 hours and to find out they couldn't help right at that time because they had to investigate because they could not figure out why iTunes wasn't installing right. Believe me I've done everything possible. And on top of all this, my iTouch is being read as a digital camera. Oh and when i ran a diagnostic on iTunes, this is what it told me.
Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)
Gateway GT5654
iTunes 9.0.2.25
QuickTime 7.6.5
FairPlay 1.5.23
Apple Application Support 1.1.0
iPod Updater Library 9.0d11
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device Driver 1.29.0.0
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number DD0D7292E04DBB3B
Current user is not an administrator.
The current local date and time is 2009-12-27 00:12:19.
iTunes is not running in safe mode.
Video Display Information
NVIDIA, NVIDIA GeForce 6150SE nForce 430
** External Plug-ins Information **
No external plug-ins installed.
Genius ID: de7ecbd7d1509092f28adf45ed3e49d9
** iPod/iPhone Connectivity Tests **
iPodService 9.0.2.25 is currently running.
iTunesHelper 9.0.2.25 is currently running.
Apple Mobile Device Service not found.
Universal Serial Bus Controllers:
Standard OpenHCD USB Host Controller. Device is working properly.
Standard Enhanced PCI to USB Host Controller. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
Texas Instruments OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
Most Recent Device Not Currently Connected:
iPod nano (4th Generation) running firmware version 1.0.4
Serial Number: 7J848J673QU
** iPhone/iPod Touch Sync Tests **
No iPhone or iPod found.
it said that it couldn't find an ipod but windows found it and it's clearly plugged in. If anyone could help me, it'd be greatly appreciated.Okay, so I have unistalled iTunes, removed everything on my computer that apple told me to, then reinstalled iTunes. But I still get the same message when i plug in my iTouch, "This ipod cannot be used because the required software is not installed." Then it tells me to uninstall and then reinstall itunes; well i have done that literally over 10 times. All to the same result: no mobile device support. I called the 1-800 number for apple and was on the phone for over 2 hours and to find out they couldn't help right at that time because they had to investigate because they could not figure out why iTunes wasn't installing right. Believe me I've done everything possible. And on top of all this, my iTouch is being read as a digital camera. Oh and when i ran a diagnostic on iTunes, this is what it told me.
Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)
Gateway GT5654
iTunes 9.0.2.25
QuickTime 7.6.5
FairPlay 1.5.23
Apple Application Support 1.1.0
iPod Updater Library 9.0d11
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device Driver 1.29.0.0
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number DD0D7292E04DBB3B
Current user is not an administrator.
The current local date and time is 2009-12-27 00:12:19.
iTunes is not running in safe mode.
Video Display Information
NVIDIA, NVIDIA GeForce 6150SE nForce 430
** External Plug-ins Information **
No external plug-ins installed.
Genius ID: de7ecbd7d1509092f28adf45ed3e49d9
** iPod/iPhone Connectivity Tests **
iPodService 9.0.2.25 is currently running.
iTunesHelper 9.0.2.25 is currently running.
Apple Mobile Device Service not found.
Universal Serial Bus Controllers:
Standard OpenHCD USB Host Controller. Device is working properly.
Standard Enhanced PCI to USB Host Controller. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
Texas Instruments OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
Most Recent Device Not Currently Connected:
iPod nano (4th Generation) running firmware version 1.0.4
Serial Number: 7J848J673QU
** iPhone/iPod Touch Sync Tests **
No iPhone or iPod found.
it said that it couldn't find an ipod but windows found it and it's clearly plugged in. If anyone could help me, it'd be greatly appreciated. -
All,
I had created a Dialog text using transaction SE61 that contains a dynamic variable
Data Sheet not printed for Sales Order Number &WA_OUTPUT-VBELV&
This diagonose object i am calling in function module POPUP_TO_CONFORM
like
call function 'POPUP_TO_CONFIRM'
exporting
titlebar = text-t01
diagnose_object = p_dobject "<<==== Here
But the issue while calling the function module i am not getting the dynamic variable &WA_OUTPUT-VBELV&
in the display is it showing like the following
Data Sheet not printed for Sales Order
Number &WA_OUTPUT-VBELV& "<=Here i need in display the sales order to be displayed
a®Hi
Yes I've understood what you mean
When I've spoken about sapscript and driven program, I means the sapscript and program manage the long text (dialog text created by SE61).
In your situation those elements are not used, because the text is directly shown on popup, so the variable inserted in the text (it's usually defined in the main program) has to assigned the PARAMETER table ( I thought you defined the variable in the program calling popup).
So try this:
PARAMETER-PARAM = WA_OUTPUT-VBELV.
PARAMETER-VALUE = <document number>.
It works
Max -
Error message when trying to install iTunes on my Pc:
Using Windows 7, had to replace hard drive. HELP!!
This installation package could not be
opened. Verify that the package exists
and that you can access it, or contact
the application vendor to verify that
this is a valid Windows installer packageHello JAH1961,
I recommend following the steps in the article below when getting an error message trying to install iTunes:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I'm unable to install Itunes on my new PC. I'm logged in as the administrator And have deleted my browsing history. This is the error I get, ITunes installation error- “This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this a valid Windows Installer package”... Any suggestions how to fix?
Hi
Try the following:
Uninstall iTunes and Quicktime
Reboot
in the task tray right click the quicktime icon and click exit.
navigate to the folder in program files and remove the quicktime directory and all its files.
Reboot.
Now try install iTunes and quicktime and it should work
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
mI am trying to download iTunes to my Sony PC, but I keep getting the following error after initial download attempt:
"This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer Package."
I have Windows 7 Home Premium, Service Pack 1.
Any help is greatly appreciated.Hi gump68,
Thanks for visiting Apple Support Communities.
You may find the steps in this article helpful if iTunes is not installing on your PC:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
All the best,
Jeremy -
whem installing itunes on my mums new computer which is windows 7 i get this message everytime "this installation package could not be opened. Verifiy that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package"
Let's check your Windows system.
1. Have you done all the important windows updates and service Packs on your system. If not do it now. START button, type in Windows Update and ENTER. Select 'CHECK FOR UPDATES'
2. Let's check your Windows system files for possible file corruption
SCAN and repair possible Windows system file corruption:
Go to command prompt (START/ALL PROGRAMS/ACCESSORIES right mouse click "command prompt" and choose "Run as Administrator"
type in
sfc /scannow
let Windows fix any system files that need to be repaired.
Restart the computer if it did actually repair any files.
3. Check your system for possible Malware. But you have to do it in WIndows Safe Mode.
Start your computer in "Safe mode with networking", go to this link download a free version of Malwarebyte.
http://www.malwarebytes.org/products/malwarebytes_free
Install and perform update immediately, then do a full SCAN. Remove malware if it indeed finds any. Restart computer to regular windows to let Malwarebyte complete the removal.
To start your computer in safe mode
Press and hold the F8 key as your computer starts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you'll need to try again by waiting until the Windows logon prompt appears, and then shutting down and restarting your computer.
On the Advanced Boot Options screen, use the arrow keys to highlight the "safe mode with networking" option, and then press Enter. Log on to your computer with a user account that has administrator rights.
When your computer is in safe mode, you'll see the words Safe Mode in the corners of your screen. To exit safe mode, restart your computer and let Windows start normally. -
installation package could not be opened verify that the package exists and that you can access it or contact the application vendor to verify that this is a valid Windows package installler what can i do ? help me
Hi,
Firstly make sure you save it to your hard disk, and then run setup from there.
If it doesn't help, you may also try to unregister Windows Installer, and then reregister Windows Installer and check if it helps. To do this, follow these steps:
1. Press Windows Key + R
2. In the "run" box, type "msiexec /unreg", and then press ENTER.
3. Press Windows Key + R
4. In the "run" box, type "msiexec /regserver", and then press ENTER.
Besides that, You could try to create a new user to download and install the application.
Karen Hu
TechNet Community Support -
I have tried and tried to install itunes on my mums zoostorm windows 7 64-bit pc and it comes up with this message "this installation package could not be opened, verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package" i have tried everything that i have been told to do and nothing has worked but then i try to install it on her toshiba satellite pro windows 7 32-bit as she reset it back to factor settings she has done ALL updates she had itunes on her laptop before but when we went to install it back on the laptop it cam up with the same message as it did on the pc i would really like it if someone can please help with this problem as i am getting so annoyed with it. I have a zoostorm windos 7 32-bit laptop and i have reset that bk to factory settings and i installed itunes on there with no problems so a soultion would be really great.
Many thanks DonnaI'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/quicktime/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer? -
Trying to uninstall itunes 11.0.4 in order to update to the most recent itunes. I get an error message that say..."This installation package could not be opened. Contact the application vender to verify that this is a valid windows installer package.
Hello JAH1961,
I recommend following the steps in the article below when getting an error message trying to install iTunes:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Received message when trying to install Itunes or Safari for Windows. " Installation package could not be opened. Verify package exists or contact application vendor to verify this is a valid Windows Installer package".
I to am having the same issue. I have a admin account and logged into it as well and still have the same message pop up. Contacted live support the woman i spoke with had to send it up higher. We went through every thing including her trying (taking over as a host on my laptop) still have not bee contacted this June will be a year that i have heard nothing from them sine She di everything she could and pushed it up higher.
-
I have had to take my pc back to factory settins, so lost my itunes, tried to install again getting message saying
the installation package could not be opened verify the package exists and that you can access it or contact the vendor to verify that this is a valid windows package,Hi
Try the following:
Uninstall iTunes and Quicktime
Reboot
in the task tray right click the quicktime icon and click exit.
navigate to the folder in program files and remove the quicktime directory and all its files.
Reboot.
Now try install iTunes and quicktime and it should work
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
The installation package could not be opened. Verify that the package exist
HELP!
I have not been able to update my Itunes to a newer version (since 6.0.5). Every time I try to upgrade to the newer version I get this error message when I try to install:
"The installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package"
This is been incredibly frustrating because now I am limited in what songs and albums I can buy online because they require the newer version. I am getting to the point where i'm ready to start using another service to get my music from now on. I've noticed that others here have the same error message, but they are using Windows Vista. I'm having this problem on Windows XP.
Any help would be very appreciated.Oh sorry what i meant was that i am trying to install adobe reader, i have tried all version from 8 to 9 and i am getting this error.The solution that i found on different forum was to use windows installer cleanup utility and clean up the previous installation. i dont have any installation in my registry.
Kindly help me in this matter -
The full message was "The installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify this is a valid Windows Installer package."
OK, I got around this error by extracting the files to "C:\Program Files (x86)\Adobe Acrobat XI"
Now I get a different error "1325.kstanwood is not a valid short file name". I'm not certain why it's even trying to create such a file name.
Maybe you are looking for
-
Microsoft applications will not open. Scree message reads: The application of Microsoft Excel(also same for powerpoint and word) quit unexpectedly. They did not quit they just don't open. Attempts to relaunch fail. This happened several times before
-
Is there a way to calculate the area of a shape?
I work in toy packaging and the size of the warning we have to use is dictated by the size of the package. On most items, it's pretty straight forward, LxW... But that doesn't always work, as the packaging isn't always that simple. Is there a way to
-
Dear, Can we create LIS for BSEG table? Anuj Modi Moderator message: please do more research before asking, show what you have done yourself when asking. Edited by: Thomas Zloch on Jun 17, 2011 9:38 AM
-
Operating systems supported by the PC-TIO-10 board
I am updating a Windows application that uses the PC-TIO-10 National INstruments board (via an ISA slot). What operating systems does the PC-TIO-10 drivers run on ? Thank You !
-
What is the reason for this error? after export part of movie broken
hi, i cannot find the reason for this strange error that happaned to me for the first time, you can see the outcome here: http://picasaweb.google.com/p.cardash/IMovieBug/photo#5164317113276584274 after exporting in imovie to h264 .mov file, from HDV