Dynamically display the time in a movie

Can anyone tell me if it is possible to display the time dynamically in a movie in Final Cut Pro. For example, I would like to display the date and time in the upper left corner of the movie with the time changing by hour:min:sec and maybe even frame as the movie plays. On a separate track or something.
I am new to this so I don't know if I need special software or if I can do it in FCP.
Thanks

There's a Generator called Timecode Generator, or Timecode Reader. Generator creates new TC, Reader reads it from the clip. But it only shows hours, minutes, seconds, not the calendar date. To display calendar date and clock time, you'll have to create a counter from scratch.

Similar Messages

Dynamically display the page numbers on forms

Hi,
I have 10 pages in a form with the common footer section/fap in all pages. I used the common footer section to maintain the consistent left and right footer (having State specific footer information) on all ten pages. But I would like to display the page number dynamically based on page number as specified below:
For example, for page 1, it should display the footer as Page 1A,for page 2 it should display as Page 1B, for page 3 it should display as Page 1C etc.,
Can anyone help me on this issue how can I dynamically display the page number based on the current page as per the above requirement.
Thanks,
Srini.
Edited by: 943696 on Jul 9, 2012 4:39 PM
Edited by: 943696 on Jul 9, 2012 4:44 PM

Ignoring the fact that you have 10 pages that you want to label all as "page 1", assuming you have version 11.4 (? or higher) you might be able to do this.
Somewhere around that version the concept of "Print time" fields was introduced where you can define a field that will make a call-out to generate the value at the point in time when it tries to print.
You would name the field something like: ~DAL MyPageValue
Yes, with the tilde next to DAL and a space between DAL and the name of a script you want to execute that would do your calculation. As the previous reply mentions, you would have to keep track of your own page counter to know whether to append the 'A', 'B', 'C', etc. to the "Page 1" description you intend.

How can I display the time remaining in the bar on the top instead of the percentage using mountain lion?

Hi,
in Lion I was able to display the time passively in the top bar. Now I only have the chance to display the percentage. Anyone has a solution for this? I do not want to click always on my battery button just to see something I used to see in the past at a more prominent place.
Actually this bug really ticks me off!
Thanks for any advise.

http://www.apple.com/feedback/macosx.html
Send feedback to apple about changing this back.
There is no native way to do this.

How do I connect to Time Capsule from a Windows 8.1 machine which is on a Windows domain. I have been able to connect from a Windows 7 machine on a Windows domain to a Time Capsule. Airport utility is not displaying the Time Capsule Win8.1 machine

How do I connect to Time Capsule from a Windows 8.1 machine which is on a Windows domain. I have been able to connect from a Windows 7 machine on a Windows domain to a Time Capsule. Airport utility is not displaying the Time Capsule Win8.1 machine.
I have checked that the firmware has been updated to 7.6.4 . Similalrly the Win8.1 machine has been loaded with the update specified in another discussion.

Firstly how are you connecting to the TC.. wireless or ethernet?
Please open a command window and ping it.. ping by name and by IP address.
If ping succeeds at least by IP it should work.
In windows explorer type
\\10.0.1.1 (or whatever the TC ip is.. that is the default).
Having the airport utility for windows loaded can help the process. As it loads bonjour for windows.
7.6.4 firmware on the TC is useless. It works better on 7.6.1
If the ping does not succeed by either name or IP address yet you have internet through the TC, then your network is setup wrongly. You are have firewalls blocking local IP. Take down all the firewalls.

How to display the time in Swing jtable

I need to display the time in jTable.
The time is a date field in ORACLE database (connected via
Oracle Thin drivers).
Im totally stuck. Please help.
TIA.

Thanks for your reply.
My problem is that I have to display time. This time is a DATE field
in ORACLE database.
Im using FORTE (UI). What the jTable display is the DATE (1900-01-01) which is not what I want. I want the time to appear in the jTable (hh.mm.ss a).
What I did was to use the TO_CHAR function of ORACLE to format the
date to display the correct time in the VIEW before mapping this view
to be used as a MODEL by the jTable.
It works now.
Much appreciate all your help. Thanks.

How to display the time 00:00:00 as blank?

Dear Friends,
I have created a new field GDF_9000_CREATED_AT in the normal screen (dynpro), the format is TIMS, however, when there is no value for it, is always display like "00:00:00" on the screen.
So how to display the time 00:00:00 as blank in the normal screen (dynpro) when there is no value for it?
Thanks a lot!!

In screen PBO module:
        LOOP AT SCREEN.
          if screen-name EQ 'my_time' AND my_time EQ time_zero.
            screen-invisible = 'X'.
            screen-active = 0.
            MODIFY SCREEN.
          endif.
        ENDLOOP.
I don't try this, but i think is true...
Edited by: Marco Modenese on May 7, 2009 10:36 AM
Edited by: Marco Modenese on May 7, 2009 10:36 AM

How to display the time length of video (current time/ total time) ?

Hi,everyone. I would like to ask how to display the time length of the video which show only in system example: it show the current time and total time? using AS 3.0.
It there any information or solution to solve it? .
I appreciate it any of you able to answer it. ^^
Thank you.

Hi,
Actually I have this requirement for MAC OS 10.5. With the code you provided, I got the output as "6289375". When I changed the URL to point to my file (file:///Users/VPKVL/Desktop/MyRecord/tempAudio.wav), I am getting the below mentioned Exception:
Exception in thread "main" javax.sound.sampled.LineUnavailableException: Failed to allocate clip data: Requested buffer too large.
     at com.sun.media.sound.MixerClip.implOpen(MixerClip.java:561)
     at com.sun.media.sound.MixerClip.open(MixerClip.java:165)
     at com.sun.media.sound.MixerClip.open(MixerClip.java:256)
     at TestWavLength.main(TestWavLength.java:13)The "tempAudio.wav" file is created by using java sound API. I am using the SSB USB Headphone Set to record the audio with the following settings for AudioFormat object:
AudioFormat audioFormat = new AudioFormat(
          AudioFormat.Encoding.PCM_SIGNED, // the audio encoding
                                                        // technique
          48000.0F,// sampleRate the number of samples per second
          16, // sampleSizeInBits the number of bits in each sample
          2, // channels the number of channels (1 for mono, 2 for
                        // stereo, and so on)
          4, // frameSize the number of bytes in each frame
          48000.0F,// frameRate the number of frames per second
          false); // bigEndian indicates whether the data for a single
                        // sample is stored in big-endian byte order
                        // (false means little-endian)Can you please suggest where I am going wrong ?

How to display the time & battery % in home screen

How to display the time & battery % in home screen

Try resetting your device.
Hold down the Home and Sleep/Power Buttons until the Apple Logo shows up.
Ignore the red slider if it appears.
This will reboot the phone, no data should be lost.

Avoid the delivery creation in MIGO/MB1B at the time of goods movement

Hi All
Can anyone please help me to know, How to skip the delivery creation step in MIGO/MB1B at the time of goods movement (311) indebug mode.
In which part of the code the delivery creation logic would be written...?
Thanks and regrds
Karuna

Hi:
It looks like to me if there is validation working in background . Please check in GGB4 there will validation active for this asset class . Low value asset check restricts you from posting an amount as specified in OAYK. Please check.
Br

No Accounting entry at the time of 101 movement.

Dear gurus,
Currently we are taking goods receipt against purchase order - 101 movements But we do the same due to material master inspection set up it mvoes to quality stock as well as accounting entry is getting passed.
Is it possible whether at the time of 101 movement only material moves to quality inspection but accounting entry will not pass. Accounting will happen when User clears the quality.
Please let me know whether this is possible
Rgds,
Saurabh

Hi!
With the movement type 103 the stock does not go into your own stocks: Only the purchase order is updated, but none of the stock tables is updated. Therefore, the stock cannot go to quality inspection.
Only when you finish the process and receive the stock fully with the movement 105 is when you can decide the destination of the goods (unrestricted, quality, blocked).
So, resuming, there is not any process that fully meets your needs: Either you work with the movement 101 and quality inspection (but in this case the accounting document will be created with the goods receipt) or you work with the goods receipt blocked stock and the movements 103 and 105 (but in this case the movement 103 will not increase your stocks).
You can read more about this process in the SAP Library:
http://help.sap.com/saphelp_470/helpdata/en/4d/2ba31643ad11d189410000e829fbbd/frameset.htm
then Goods Receipt -> Goods Receipts for Purchase Orders -> Goods Receipts into Goods Receipt Blocked Stock
Esther.

Displaying the time

I am trying to get iMovie 09 to display the time ON THE VIDEO while it is playing. How do I do that? I know there is that one thing to display hours and minutes, but thats not good enough, I need the seconds and even milliseconds if possible. Is there any way to do this in iMovie? I need to do it for work. Also, if that's not possible, there has to be some program out there that will do. If there is, any recommendations?
Thanks

I think I found the perfect program, it's called Toki TC. It's $20 but seems to do exactly what I'm looking for so if there's anybody else that needs to do what I'm doing, look up Toki TC. If anybody knows of a better or cheaper program, please post =)

I am having a difficult time getting the duration of multiple selected clips. The duration display only will display the time for one clip. Yes, I know I can add them up myself, but why? :-)

I am having a difficult time getting the duration of multiple selected clips. The duration display will only display the time for one clip not multiple clips. Yes, I know I can add them up myself, but why? :-)
I am using imovie 10.0.6

For reasons that you would have to ask Apple for they decided not to allow the precise position of the playhead to be shown in iMovie 10 (unlike in FCP 10.1.x).
Geoff

I cannot get itunes to play certain tv shows all i get is a black screen and the timer does not move what should i do?

I am trying to play a season on my computer but it will not play. The timer does not move and all i get is a black screen. Should i just repurchase the season. the season does play on my ipod.

http://support.apple.com/kb/ts3694
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, and 40
These errors typically occur when security software interferes with the restore and update process. Use the steps to troubleshoot security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See the steps under the heading "Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store." If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.

COGI : how to display the time of a goods movement?

Hello,
through COGI, I get the good movements with error per material.
When I open the errors list for a material, I get the posting date for each good movements but not the time!
Could you please let me know how to do for displaying error time or posting time in this screen?
Thank you for your help!
François

Deleted

How to use same dynamic text, multiple times in a Movie

FLASH CS5.5
How can a dynamic text field be used multiple times, on any
frame, in any new layer during a Movie?
~~
A number of unique dynamic text fields are being used.
The intent is to use them each, many times during a Movie.
(i.e. a users first name)
They are successfully being "ExternalInterfaced" from a PDF form field.
(the SWF is displayed within the PDF as a RMA)
This all works well, IF I only use one instance of the dynamic text field.
(one use of each unique text field)
If I try and use that same dynamic text field, again, in a new layer, later in the SWF,
all of that said, duplicate dynamic text fields do not display.
~~
Stumped!!!
Thanks in advance for your advice / comments!
D-

Thanks Ned,
I always welcome learning something new.
I did not know creating a new keyframe,
creates a new instance.
Yes, I had used the same dynamic text field instance name in
numerous, new layers (great observation).
With the objective to display the User's name throughout
the timeline (on and off)...
I'll attempt to paraphrase your solution;
Use a single layer to display the dynamic text field.
Extend this layer's timeline throughout the movie, or end use of the dynamic text field.
Help with this one ??
Set the visible properties to true or false as need through out the timeline.
( Does require an AS3 ? )
I'll give that a try.....
~~
Side of effect of using the above solution;
The SWF in it's attempted state, uses the dynamic text field instance, in
different places, different text sizes, on the stage, throughout the Movie.
(i.e. the User's first name appears in different sentences...)
Per the solution above,
I believe I will be limited to One location, one format setting.
Is this assumption correct?
I can make this work from a display / Movie point of view.
However, your first VAR concept, noted above, might be
worth exploring should more flexibility be required.
Thanks for making the time to coach...
D-

Dynamically display the time in a movie

Similar Messages

Maybe you are looking for