Dynamically importing a .mov file into flash

Hi,
I need to import a .mov file into a flash file and create a
.swf movie. I can do it through File > Import Movies option. But
I want to make it dynamic and import the movie. I would like to use
ActionScripts rather than the File> Import options. Pls let me
know if this is possible. Let me know if you have any questions.
Appreciate any help.
Thanks & Regards,
Magesh

You can only dynamically load at runtime FLV movies.
You can automate the authoring time environment but this is
only with the Authoring tool. See
Extending
Flash

Similar Messages

Cannot import a .mov file into the library

I am trying to import a .mov file into my library so I can
create a .fla file. Every time I try to import it into the library
using the import wizard, it starts the importing process and always
quits not quite two minutes into the process. It then returns me to
the front page of the import wizard. I have done this before with
absolutely no problems.
The one thing that I am wondering about is the size of this
particular .mov file. It is 377MB. Do you think this may be part of
my problem? Thank you in advance for anyone's input or
suggestions!

Jeremy Williams wrote:
> I am trying to import a .mov file into my library so I
can create a .fla file.
> Every time I try to import it into the library using the
import wizard, it
> starts the importing process and always quits not quite
two minutes into the
> process. It then returns me to the front page of the
import wizard. I have
> done this before with absolutely no problems.
>
> The one thing that I am wondering about is the size of
this particular .mov
> file. It is 377MB. Do you think this may be part of my
problem? Thank you in
> advance for anyone's input or suggestions!
I would consider 10mb to be too big for a flash file. Even if
it was CD
I would load it dynamically to avoid performance problem.
377mb is out of the question way beyond flash ability to
maintain stable
performance, not just the final output but the IDE itself.
Best Regards
Urami
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

A problem with importing layered PSD file into Flash

Hi.
There's a problem with importing layered PSD file into Flash.
If I import a layered PSD file, some part the color of the lower layer is shown at the edge of objects or shadows. Instead, if I crop each layers first and import them, there's no problem.
If the higher layer has brush or transparent effects, it becomes worse.
Any help with this problem?
Thanks.

How was the original art created? Was the original RGB or CMYK? What is the resolution of the Photoshop file? Flash only works well with RGB and 72 pixel per inch resolution. If your original art is not set this way, then Flash will attempt to convert it as it imports it. Flash uses the sRGB color space. You'll get the best color translation if your Photoshop file is using this color preference.

When i import a movie file into iMovie,it somehow reverts to the shortened file of the same name that i previously had used

I'm trying to import a movie file into imovie that I know is 3hr16mins long but when it's finished importing,all I have in the programme is the heavily edited 51mins that i used in a previous project (using the same file),5 years ago. How can I stop iMovie from reverting back or could the much longer file be there and I have incorrect settings so I can't see it all?

Are these files MPEG compressed files? iMovie can not deal with the multiplexed audio of those files. For suggestions on how to get them right start here...
http://www.danslagle.com/mac/iMovie/tips_tricks/6030.shtml
And if your files are not MPEGs, some of the suggestions on that page may still do what you need done.
Patrick

Can I import a *.mov file into iPhoto?

Can I import a *.mov file into iPhoto? If so, how?

Yes. Open iPhoto:
File > Import to Library... > select the .move file > Import

Image problems importing Illustrator 10 file into Flash MX.

Hello,
I'm working on my portfolio and want to import an Illustrator
(version 10) file into Flash (Flash MX). The problem I'm having is
that when I import the Illustrator file into Flash, it comes out
looking blurred. I tried exporting the Illustrator file into
Photoshop and saving it as a JPEG, PNG, and TIFF (in each file
format, changing the image size to 72 dpi) and I still get the same
blurred result. I also tried saving the file for web, in
Illustrator (in JPEG and PNG formats) with no success as well.
The Illustrator file is a small collage of my graphic design
work (where I pasted graphic work done in Illustraor and made
clipping masks to collage them together), so I'm not sure if
bringing these files together maybe causing some technical issue or
is importing Illustrator files into Flash just something that will
always appear blurred. If so, is there a way I can bring the file
into Photoshop and work with it where I can import it without the
blurred appearance?
Any help will be greatly appreciated.

Hi Matthew,
Here's the Help doc that talks in more depth about Smart Objects:
http://help.adobe.com/en_US/photoshop/cs/using/WS41A5B796-6846-4e95-8459-95243441E126.html
And here's a section that goes into more detail on Placing files:
http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-78f2a.h tml#WS634E6022-BC34-4aa8-857B-21D88D4C8D50a
We have multiple request to add support for externally linked files and certainly see the value. There also are a couple third party solutions that offer linked file behavior (I'm not sure what versions of Ps they work with). You can see and add to the request (and find the third party solutions) here:
http://feedback.photoshop.com/photoshop_family/topics/please_consider_a_references_tool_to _create_links_to_layers_or_folder_groups
regards,
steve

Can't import mp4/mov files into iMovie

I tried to create a new project by importing a .mp4 file from my account on Youtube. It copied the file to the event but didn't create a thumbnail. I did some research and I tried:
-Quitting imovie, changing the name of the event folder, then restarting imovie.
-Importing the .mp4 to a different event folder. Quitting/restarting.
At this point, the thumbnail for the newly imported movie appeared but the other videos that were previously (and successfully) thumbnailed in that event disappeared. I quit/restarted iMovie and all the thumbnails in that event were missing.
Here's what I've tried since then:
-Converting the .mp4 in Handbrake to .mp4 and then importing again. No luck.
-TRYING to convert the .mp4 to .mov in mpeg streamclip. I get an "Audio Decoding Error" when I attempt.
-Converting the .mp4 to .mov while disabling the sound in mpeg streamclip. IT WORKS and iMovie is able to import AND thumbnail.
So it'd appear that there's something wrong with the audio in the .mp4 file. Tried other .mp4 files and none of them were able to be converted or imported. Tried extracting the audio from the .mp4 file via MPEG streamclip and there's the same "Audio Decoding Error." The audio on the .mp4 file is AAC.
OK... It'd appear that I'd need to just import the .mov (no sound) along with the audio from the clip (I've used AudioHijack for that) to edit both in iMovie. The problem is that when I try to export it in iMovie I receive error codes.
This just all seems way, way more complicated that it needs to be. Does anyone have any suggestions on something I haven't tried yet or perhaps some video editing software (non FCE) worth looking into?
Thanks

I was currently having the same issue trying to import into imovie. I have EyeTV Hybrid and when exporting a movie it asks you to select format in which to export it in. I selected m-peg4 and when I tried to import into imovie it was grayed in the finder, so what I did was return to the export feature in EyeTV and exported again under a different format - for imovie. It's exporting as we speak and I feel this will allow me to import properly now. Hope this helps.

Problem Importing Importing Avid Mov File Into FCP

Hello all,
I had transitioned into this issue off an older thread I had, with a different topic. So I figured it was smarter to just make it it's own thread, since it's become it's own issue.
I am editing the core of a project on Final Cut Pro 6. A portion of the footage that was shot for this project though, was captured on a PC into Avid Media Composer 3.0, and therefore, converted to MXF format.
I am running both Final Cut Pro 6 (FCP 6) and Avid Media Composer 3.0 (AMC3) on my Macbook Pro, so I was able to import this MXF footage into AMC3. That was the easy part. The hard part, has been knowing how to properly export it, so I can then, properly import it into FCP6.
Important detail about the FCP6 System Settings:
- *The sequence preset is DVCPRO HD - 1080p24*
In the Avid, when I go to export a small 1 min clip (as a test), these are the Quicktime options I am given:
Fast-Export Quicktime NTSC
Fast-Export Quicktime PAL
Make New - QuickTime Reference
Pro Tools QuickTime (ref)
QuickTime Reference
Quicktime Reference DV Codec
Send To QT Movie
None of them were seeming to work. I was getting this message:
"Long GOP media can not be exported using same as source. Please select a custom resolution or transcode to an I-frame only resolution."
*Send To QT Movie* seems to be the only one that works. But I then had to go in and customize it, making my own Saved preset for this.
I've now so far tried this with 4 custom presets, and while all of them are able to export and play / look fine on my desktop..... none of them import correctly into FCP6. They'll play as clips... but completely stuttery and unusable. I'll then drop them into a sequence, and they'll play for about 3 seconds and then I'll get this message:
"Warning - Dropped Frames
One or more frames were dropped during playback.
If this occurs frequently, try:
- Turning off 'Unlimited RT'
- Lowering your compression data rate.
- Closing open sequences.
- Lowering the preference for real-time audio tracks.
- Increasing the speed of your system and/or disk drives and/or network connection."
Now, I've also gotten a message about the projects needing to have the same capture preset, but I can't replicate it at the time of this post. Though, I'm sure this is probably the root of the problem.
Here's why: In AMC3, with my custom export preset, I notice that Avid supports the DVCPRO codecs, but doesn't have the exact one I'm using in FCP6.
Here's what I have in my AMC3:
DV/DVCPRO - NTSC (this is the one I'm using, and have tweaked the frame rate to 23.98)
DVCPRO - PAL
DVCPRO HD 1080i50
DVCPRO HD 1080i60
DVCPRO HD 1080p25 (this one is close...)
DVCPRO HD 1080p30
DVCPRO HD 720i50
DVCPRO HD 720i60
DVCPRO50 - NTSC
DVCPRO50 - PAL
Now, you'll remember that my sequence preset in FCP6 is DVCPRO HD - 1080p24.
Because this doesn't exist in Avid, I went with DVCPRO HD 1080p25 and just customized the frame rate to 23.98.
Still no cigar though.
Does anyone have any suggestions on how I should further customize the Avid codecs? Or is there even a way to just download more Avid DVCPRO codecs so I can find one with 1080p24?
Sorry for such a long post. I like to be thorough.

Hi Kyle,
Just some more backstory:
This was a two day shoot.
- One Day 1 of the shoot (Saturday), we shot with the Sony camera, on Sony DVC tapes (MiniDV). This was about 20 gigs worth of media shot that day. That footage was later captured onto an Avid MC 3.0 in MXF format. (I still have it all raw on my passport drive if you need further info about those files)
- On Day 2 of the shoot (Sunday), we got the camera we wanted all along for the shoot -- the Panasonic HVX200. Therefore, all of Day 2 was shot on P2 cards, converted on a Macbook Pro, and then put onto an external harddrive. This was about 80 gigs of media.
Right now, when I watch the Sunday footage (Sony) on FCP6, I do indeed see faint horizontal lines on the canvas, when free-framed and at 100%. They're not terrible... but they're there. (I'm not great at this, so if you need total confirmation, I can upload you a large rez screenshot so you can decipher if the interlaced lines are there)
Now, I just checked this out on the Sunday footage as well (the Panasonic P2 card footage which wasn't converted, but imported directly into FCP6, without need for the Avid as the middle-man), and I see the same faint lines on this as well.
Both pieces of media (the original Panasonic footage and the converted Sony footage) are at 29.97FPS. Both are at the same Compressor now (DVCPRO HD 1080p30) per your instructions . Meaning, the Pansonic footage brought into FCP6 had that as a preset from the moment I installed the program and was asked to choose my project settings..... and once you explained to me how to look for this, I then sought to match it on the Avid end, and changed the EXPORT settings on the Avid files to that codec.
So both sources medias match now in FCP6. They also play now without stutter.
But they both do have those lines. Albeit, faint, but I'm concerned about them now.
So I think this definitely has to do with my Final Cut Audio/Video settings:
My Sequence Preset is: DVCPRO HD - 1080p24
My Capture Preset is: 1080p24 48KHz
Should the Sequence Preset be changed to p30?
And if so... will I then have to recapture all the Panasonic footage back in? (I'd lose all my log notes and shot names).
Or, can I just delete the two timelines, change the sequence setting, and then redrag them back in?
Thanks for all your help, Kyle.

Problem importing some .MOV files into Premiere Elements 11

Hello,
I am trying to import film footage into Premiere Elements 11 and am coming across a rather confusing problem. All of the footage is in .mov format and all of it was taken on the same device on the same day with the same settings.
When I try to import the footage, some files import ok, others will not import at all and I get a message saying 'The importer reported a generic error'. It seems very odd to me that some .MOV files are OK and others are not.
This same footage can easily be imported into Premiere Elements 10 and into Windows Movie Maker - which makes me think the issue is with Premiere Elements 11.
Does anyone have any ideas on this?
Thanks

What model of camcorder is your video coming from and what format and resolution is it? Did you use Premiere Elements to get the video from the camcorder to your computer?
Have you ensured you have the latest version of Quicktime installed on your computer?

Importing Quicktime .move file into iMovieHD

I have been successfully pulling the files off a DVD using DVDxDV, and using that to export to Quicktime in .mov NTSC format. Then I can import into iMovie HD. It's been fine, but I have one file now that will not import. When i try to import it, it gives me an error message and says there isn't enough disk space to import it. But I was able to import other files, same size, and the window at the bottom of iMovie says there is more than 20 GB available. I thought maybe there was something wrong with that one file, so I went through the extraction process again, but that one file will still not import, even if I start a new empty project. The file is 1.4 GB, but the project has only about 25 minutes of video and this new file is about another 8 minutes.
Does anyone have any ideas? I have a 1GHZ Power PC G4, with 768 meg ram.
Thanks in advance for any help.
Pat

if it is already in DV format you really do not have to import it
There is a difference in .dv stream and a DV-encoded .mov:
You can just put a plain .dv stream in the Media folder and iMovie will digest it OK (if it is the same PAL/NTSC and 4:3/16:9 spec as the receiving project).
But this doesn't work with DV-encoded .mov files which the OP may have. iMovie HD will sort of imports it, but if you add a title, it will have bad artifacts.
I prefer to use MPEG Streamclip which, unlike some of its rivals, allows to convert DVD/VOB/MPEG to .dv stream which is iMovie's native format. For some strange reason other apps can convert to only .mov.
My only gripes with MPEG Streamclip are that the current version can't set the 4:3 or 16:9 flag to the exported .dv file (BTW, iMovie HD can't either!) and that it doesn't recognize QuickTime 7-style AIF format. The next version might fix these.

Help- Importing DV movie file into FCP how do I change my FCP settings

I am importing 5 different dv movie files that are approx 114.1mb each into Final Cut Pro. I opened a new project.. imported the files. Now I want to start putting together my sequence, but I need to change some settings, and I don't know where to start.
When I go to insert the portion of one of the files into the sequence I get a popup saying
"Attention- This clip does not match the sequence's settings or any of your sequence presets.
For best performance your sequence and External Video should be set to the format of the clips you are editing.
Change sequence settings to match the clip settings?"
(No) (Yes)
I obviously need to select yes.. but then i'm not sure what to choose after that.
Could someone guide me please?
Thank you

They are .dv (person who sent them to me used imovie to upload their video they shot)
So I need to open them in compressor and find the preset to convert them to dv quicktimes.
Once they are dv quicktimes and I import them into my new project. Should I be good to go?
Sorry for the novice questions... I do appreciate your help.

Cannot import specific MOV file into iMovie. HELP please!

I have been using iMovie for many years and am not a novice.
For some reason, I have a specific MOV file that I cannot import into iMovie 10.0.5. When I try to import the file, I get an error message:
"No Importable Files: None of the selected files or folders can be imported"
The file is NOT corrupt and plays perfectly in QuickTime. Interestingly, when I try to import the movie in iMovie, it shows 0.0 sec duration, even though it load/plays perfectly in iMovie with a duration of 54:45. See file A1 below:
I even tried converting the file to M4V in Quicktime, but iMovie would still not import the new M4V file.
Any suggestions? This is an important Movie, I cannot re-record it, and I need to edit it in iMovie.
Thanks in advance!

I copied it below. I would appreciate any suggestions!
Basic information:
General
Format : MPEG-4
Format profile : QuickTime
Codec ID : qt
File size : 78.9 MiB
Duration : 54mn 44s
Overall bit rate mode : Variable
Overall bit rate : 201 Kbps
Encoded date : UTC 2014-12-10 21:01:49
Tagged date : UTC 2014-12-10 21:01:58
Writing library : Apple QuickTime
Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings, CABAC : Yes
Format settings, ReFrames : 2 frames
Format settings, GOP : M=2, N=30
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 54mn 44s
Bit rate mode : Variable
Bit rate : 63.4 Kbps
Maximum bit rate : 768 Kbps
Width : 1 728 pixels
Height : 1 080 pixels
Display aspect ratio : 16:10
Frame rate mode : Variable
Frame rate : 0.294 fps
Original frame rate : 25.000 fps
Minimum frame rate : 0.062 fps
Maximum frame rate : 50.000 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.116
Stream size : 24.9 MiB (32%)
Encoded date : UTC 2014-12-10 21:01:38
Tagged date : UTC 2014-12-10 21:01:58
Audio
ID : 2
Format : AAC
Format/Info : Advanced Audio Codec
Format profile : LC
Codec ID : 40
Duration : 54mn 38s
Source duration : 54mn 38s
Bit rate mode : Constant
Bit rate : 128 Kbps
Channel(s) : 1 channel
Channel positions : Front: C
Sampling rate : 44.1 KHz
Compression mode : Lossy
Stream size : 48.3 MiB (61%)
Source stream size : 48.3 MiB (61%)
Expanded information:
General
Count : 284
Count of stream of this kind : 1
Kind of stream : General
Stream identifier : 0
Count of video streams : 1
Count of audio streams : 1
Video_Format_List : AVC
Video_Format_WithHint_List : AVC
Codecs Video : AVC
Audio_Format_List : AAC
Audio_Format_WithHint_List : AAC
Audio codecs : AAC LC
File name : OB
File extension : mov
Format : MPEG-4
Format/Extensions usually used : mp4 m4v m4a m4b m4p 3gpp 3gp 3gpp2 3g2 k3g jpm jpx mqv ismv isma f4v
Commercial name : MPEG-4
Format profile : QuickTime
Internet media type : video/mp4
Codec ID : qt
Codec ID/Url : http://www.apple.com/quicktime/download/standalone.html
Codec : MPEG-4
Codec/Extensions usually used : mp4 m4v m4a m4b m4p 3gpp 3gp 3gpp2 3g2 k3g jpm jpx mqv ismv isma f4v
File size : 78.88 MiB
Duration : 00:54:44.630
Overall bit rate mode : Variable
Overall bit rate : 201 Kbps
Stream size : 5.71 MiB (7%)
Proportion of this stream : 0.07233
HeaderSize : 1305394
DataSize : 81406130
FooterSize : 0
IsStreamable : Yes
Encoded date : UTC 2014-12-10 21:01:49
Tagged date : UTC 2014-12-10 21:01:58
File last modification date : UTC 2014-12-10 21:47:04
File last modification date (local) : 2014-12-10 16:47:04
Writing library : Apple QuickTime
Writing library/Name : Apple QuickTime
Video
Count : 274
Count of stream of this kind : 1
Kind of stream : Video
Stream identifier : 0
StreamOrder : 0
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format/Url : http://developers.videolan.org/x264.html
Commercial name : AVC
Format profile : [email protected]
Format settings : CABAC / 2 Ref Frames
Format settings, CABAC : Yes
Format settings, ReFrames : 2 frames
Format settings, GOP : M=2, N=30
Internet media type : video/H264
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Codec ID/Url : http://www.apple.com/quicktime/download/standalone.html
Codec : AVC
Codec/Family : AVC
Codec/Info : Advanced Video Codec
Codec/Url : http://developers.videolan.org/x264.html
Codec/CC : avc1
Codec profile : [email protected]
Codec settings : CABAC / 2 Ref Frames
Codec settings, CABAC : Yes
Codec_Settings_RefFrames : 2
Duration : 00:54:44.630
Bit rate mode : Variable
Bit rate : 63.4 Kbps
Maximum bit rate : 768 Kbps
Width : 1 728 pixels
Height : 1 080 pixels
Pixel aspect ratio : 1.000
Display aspect ratio : 16:10
Rotation : 0.000
Frame rate mode : Variable
Frame rate : 0.294 fps
Original frame rate : 25.000 fps
Minimum frame rate : 0.062 fps
Maximum frame rate : 50.000 fps
Frame count : 967
Resolution : 8 bits
Colorimetry : 4:2:0
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Interlacement : Progressive
Bits/(Pixel*Frame) : 0.116
Stream size : 24.9 MiB (32%)
Proportion of this stream : 0.31508
Encoded date : UTC 2014-12-10 21:01:38
Tagged date : UTC 2014-12-10 21:01:58
Buffer size : 768000
Audio
Count : 222
Count of stream of this kind : 1
Kind of stream : Audio
Stream identifier : 0
StreamOrder : 1
ID : 2
Format : AAC
Format/Info : Advanced Audio Codec
Commercial name : AAC
Format profile : LC
Codec ID : 40
Codec : AAC LC
Codec/Family : AAC
Codec/CC : 40
Duration : 00:54:38.179
Source duration : 00:54:38.193
Bit rate mode : Constant
Bit rate : 128 Kbps
Channel(s) : 1 channel
Channel positions : 1/0/0
ChannelLayout : C
Sampling rate : 44.1 KHz
Samples count : 144567694
Frame count : 141179
Source frame count : 141180
Compression mode : Lossy
Stream size : 48.3 MiB (61%)
Proportion of this stream : 0.61259
Source stream size : 48.3 MiB (61%)
Source_StreamSize_Proportion : 0.61259

I cannot import sandisk movie files into iMovie any more after years with no problems.

For years I have filmed with my Panasonic HC-X900 and taken the SD card via a usb convertor, plugged it into my macbook pro and iMovie has automatically found the new files - easy to import into iMovie. Now the files are nowhere to be seen even though I can play them back through the camera. Any suggestions?

For years I have filmed with my Panasonic HC-X900 and taken the SD card via a usb convertor, plugged it into my macbook pro and iMovie has automatically found the new files - easy to import into iMovie. Now the files are nowhere to be seen even though I can play them back through the camera. Any suggestions?

Importing Illustrator CS3 files into flash CS3 to tween

Hello,
I'm definitely not a flash pro so I would like some help!
I'm trying to animate a man in Flash CS3 who was drawn in
illustrator CS3.
I've imported all the layers but when I try to tween them
only the ones that have a single path tween correctly. Can you only
tween single path layers or am I being an idiot?
Many thanks and I look forward to your comments!

you can actually make illustrator drawings into symbols for
use in Flash CS3 while they're still in Ai. I would try that
approach first. There are some video tutorials on Adobe's site-
I've lost the link.
That takes it out of the multi-layer wackiness, and puts
everything together in nice packages.
Hopefully I'm not telling you something you already know X
/

Big trouble with importing my .MOV files into any editing software.

Hi All
I am new to the forum and i would like to ask you a really big question that has been bugging me for days now.
I have a Cannon 700D and i have CS 4 pro and Cyberlink Powerdirector 12. Both worked fine with any other video file, but when i tried to import a file originating from my cannon 700D camera both of the softwares stated that the files were either corrupted or not supported. The error message also stated that i should call the video provider to ask for an alternative video footage (which is me ). I tried having quick time installed so that it could install various other kinds of CODEC so that it could read and I have also tried switching the camera settings from PAL to NSTC. I would be really glad if anybody could give me an explanation and a detailed explanaiton on how to fix my problem. Thank you very much in advance.
Pepe

Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
https://forums.adobe.com/thread/1070933 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Dynamically importing a .mov file into flash

Similar Messages

Maybe you are looking for