Dynamically passing the values to search help

hi
can I pass some values dynamically to search help input field.
If I select a profit centre value from a drop down in separate field it should reflect the corresponding values in
search help which is cost centre input field ( i/p fields is in a column of a UI element table).
If I add one more row also the corresponding column should bears the search help...
thanx in advance.......

Data dictionary based search helps can have multiple importing parameters within Web Dynpro. There are few rules that are documented in the online help however:
Be aware that import and export parameters for the search help are determined only within the same context node (see also Transport of Values for the Input Help), and even then only if a Dictionary structure is assigned to the node.
http://help.sap.com/saphelp_nw70/helpdata/EN/35/bdb6e2c48411d1950800a0c929b3c3/frameset.htm

Similar Messages

Restricting the Value of Search help in MIRO based on vendor

Dear all,
I had a problem in resticting the values of search help for vendor in the Po reference tab. the Seach help is KRED . I had written a search help exit in it but i dont know how to restrict the vaues. I have to restict the Vendors Which starts with 1 series like 10000001,1000002 etc.
Can any one help me out where to write the code in search help exit like CALLCONTROL-STEP = 'SELONE' or 'SELECT' or 'DISP' and what logic i need to use.
Thanks & regards
sreehari p

Hi Sreehari,
Write your Select query inside IF callcontrol-step = 'DISP'.
Use below code.
*Types
TYPES: BEGIN OF l_ty_tab,
         lifnr TYPE lifnr,
         END OF l_ty_tab.
DATA: l_t_tab TYPE TABLE OF l_ty_tab,
        l_wa_tab TYPE l_ty_tab,
        l_wa_recordtab TYPE seahlpres.
*Before displaying hitlist
IF callcontrol-step = 'DISP'.
    REFRESH: record_tab[],l_t_tab[].
SELECT LIFNR FROM lfa1 INTO TABLE l_t_tab WHERE lifnr LIKE '1%'.
IF NOT l_t_tab[] IS INITIAL.
*Pass hitlist to standard table record_tab
    LOOP AT l_t_tab INTO l_wa_tab.
      l_wa_recordtab-string = l_wa_tab.
      APPEND l_wa_recordtab TO record_tab.
      clear l_wa_recordtab.
    ENDLOOP.
ENDIF.
ENDIF.
Thanks,
Sap Fan

Pass a value to search help field

Hi all,
i have two fields on my screen.
I have a elementary search help for one the field.
I have fld1 and fld2 and i have search help for fld2.
The user puts the value in fld1 and when i do search help for field2 , i get 3 field for input in search help window.
In one of those fileds i have to fill with one value based on the input in fld1.
When ever i do F4 on fld2 , i have to one field filled with a value based on fld1 and if the user wants they should be able to change it.
Let me know how to achieve this
I have a search help exit for for fld2 search help
Thanks

Hi ,
I guess you haven't understood my issue.
I have everything , all i want is to apass a value to one of the field in search help window.
when ever i click the f4 help this value should display in the search help window
hope iam clear
thanks

Dynamically passing the values to IN query in JDBC

Hi,
I have a list which contains a single or multiple values which does have CustomerVO as a generic.Here i need to iterate the list pass these values to "IN" query.
These should happen dynamically, as we dont know whether the list will hold a single or multiple value. If the list.size ==1 , then it contains a single value in it. Hence there is no need for a comma(,) in the IN query else we need to have it, like .... IN (Aaron,Bob). Please help me in this?
Thanks.

797836 wrote:
I have a list which contains a single or multiple values which does have CustomerVO as a generic.Here i need to iterate the list pass these values to "IN" query.
These should happen dynamically, as we dont know whether the list will hold a single or multiple value. If the list.size ==1 , then it contains a single value in it. Hence there is no need for a comma(,) in the IN query else we need to have it, like .... IN (Aaron,Bob).So basically you need to output the List (capital 'L') as a comma-delimited list (small 'l').
The procedure for that is usually something like:
1. Output the first element.
2. For any further elements:
2a. Output ","
2b. Output the element.
Winston

Dynamically setting the values for the Adapter Configuration in BPEL

We are configuring the JMS adapter to put into an MQ topic. For this we are giving all the values for the configuration parameters like
Factory Properties.
JMS connection Factory
Transacted
Destination Type
Username
Password
Destination Name, etc...
and we are able to produce message on the MQ.
Our requirement is to dynamically pass the values for the above parameters from some configuraion files(other than oc4j-ra.xml), which will have value for each obove parameters.
Any help on this is highly appreciated.
Regards,
Suman

Re: JMS Properties setup
this thread will explain how to do it.

Dynamically setting the values for the Adapter Configuration

We are configuring the JMS adapter to put into an MQ topic. For this we are giving all the values for the configuration parameters like
Factory Properties.
JMS connection Factory
Transacted
Destination Type
Username
Password
Destination Name, etc...
and we are able to produce message on the MQ.
Our requirement to dynamically pass the values for the above parameters from some configuraion files(other that oc4j-ra.xml), which will have value for each obove parameters
Any help on this is highly appreciated.

Re: JMS Properties setup
this thread will explain how to do it.

Passing the values from one pgm to another pgm (Calling pgm has no sel scr)

Hi gurus,
In my requirement i need to pass the values from one program to another program.
I am using SUBMIT statement . But , the program which i am calling has no selection screen.
So how can i pass the values?
Please help me ASAP.
Regards,
Bhanu.R

Export your internal tables or work areas to a memory id in ur program before u use submit.
Then in second pgm you have to import from memory id given above.
example.
EXPORT gs_header FROM gs_header to memory id 'HEADER'.
EXPORT gt_item FROM gt_item to memory id 'ITEM'.
SUBMIT YFIIN_DISHC_MAILREPORT EXPORTING LIST TO MEMORY AND RETURN.
In your second pgm you can write
import gs_header TO gs_header from MEMORY id 'HEADER'.
import gt_item TO gt_item from MEMORY id 'ITEM'.

Help Creating A Link In An IR Report Passing The Value From A Different Col

Version 4.0.2.00.07
Hello,
I have an Interactive Report with a column that I need to create a link on but I need to pass the value of another column.
This report shows the Features of a particular Release. There is a select list for the Release that is selected and executes the report.
There is a column that indicates whether the Feature has a Commitment attached to it. If there is have that a link to another report that shows all the Commitments for that Feature by passing the FEATURE_ID which is also a column on the Feature report.
Query:
SELECT
      ,CASE WHEN ft.feature_id IN (SELECT cc.feature_id
                                   FROM customer_commitments cc
                                   WHERE ft.feature_id = cc.feature_id
                                  ) THEN 'Yes' ELSE 'No'
       END "Commitment Exists"
          ,ft.feature_id
FROM ....If "Commitment Exists" has a 'Yes', the 'Yes' is a link that will pass the FEATURE_ID to another report that will show the Commitments for that Feature. If the "Commitment Exists" has a 'No' then no link.
I was also wondering if the Commitment report could open in a seperate window and make it modal?
I hope this is clear and someone could help me.
Please let me know if it's not clear or more information is needed.
Thanks,
Joe

To accomplish this I would build the link as part of the value. So if Yes the Yes itself would be a link, if No is simply text as today.
It would look something like this:
SELECT
      ,CASE WHEN ft.feature_id IN (SELECT cc.feature_id
                                   FROM customer_commitments cc
                                   WHERE ft.feature_id = cc.feature_id
       THEN
        '<a href="f?p=&APP_ID.:NEW_PAGE:&SESSION.::::Pn_FEATURE_ID:' || ft.feature_id || '">Yes</a>'
       ELSE
        'No'
       END "Commitment Exists"
          ,ft.feature_id
FROM ....One problem with this approach is when you export the report (as a CSV for example). There are a few ways to handle this, one is to simply duplicate the column with clear text yes and no and set this column to be included on export and only visible on export. The other column, with the link, set it to no export.
The other option is to add another condition on the REQUEST value.
SELECT
      ,CASE WHEN ft.feature_id IN (SELECT cc.feature_id
                                   FROM customer_commitments cc
                                   WHERE ft.feature_id = cc.feature_id
       THEN
              decode(:REQUEST, 'CSV', 'Yes'
            , '<a href="f?p=&APP_ID.:NEW_PAGE:&SESSION.::::Pn_FEATURE_ID:' || ft.feature_id || '">Yes</a>'
       ELSE
        'No'
       END "Commitment Exists"
          ,ft.feature_id
FROM ....It seems that the link itself is getting replaced with a #. The link would look something like this:
'f?p=&APP_ID.:NEW_PAGE:&SESSION.::::Pn_FEATURE_ID:' || ft.feature_id
Hope this helps.
Oh and of course, in order for the link to display you need to change the Display Type to "Standard Report Column" otherwise the HTML will be escaped.
Thanks
-Jorge

How to pass the value dynamically in exp/imp utilities of oracle

I want to pass the value of org_grp_i dynamically,instead of passing the value
19.Can you please tell how to write the script to this
exp fas/xxxxxx@fasbd001 file=audit_grn_28aug.dmp tables=audit_grn query=\"where org_grp_i=19 \"
where xxxxxx is the password
Thanks

You need to make use of command line arguments. You can go through this link for example.
http://www.freeos.com/guides/lsst/ch02sec14.html
In your shell script(say test.sh) you can have
exp fas/xxxxxx@fasbd001 file=audit_grn_28aug.dmp tables=audit_grn query=\"where org_grp_i=$1 \"$1 indicates it accepts the first argument from command line. if you want to pass 19, add that next to the script you're executing.
From command line you can call this shell script say test.sh 19

What is the use of search helps? where can we creat it?

use of search helps and where can we create it?

Hi narendra
LOCK OBJEC TS
Lock objects are use in SAP to avoid the inconsistancy at the time of data is being insert/change into database.
SAP Provide three type of Lock objects.
- Read Lock(Shared Locked)
protects read access to an object. The read lock allows other transactions read access but not write access to
the locked area of the table
- Write Lock(exclusive lock)
protects write access to an object. The write lock allows other transactions neither read nor write access to
the locked area of the table.
- Enhanced write lock (exclusive lock without cumulating)
works like a write lock except that the enhanced write lock also protects from further accesses from the
same transaction.
You can create a lock on a object of SAP thorugh transaction SE11 and enter any meaningful name start with EZ Example EZTEST_LOCK.
Use: you can see in almost all transaction when you are open an object in Change mode SAP could not allow to any other user to open the same object in change mode.
Example: in HR when we are enter a personal number in master data maintainance screen SAP can't allow to any other user to use same personal number for changes.
Technicaly:
When you create a lock object System automatically creat two function module.
1. ENQUEUE_<Lockobject name>. to insert the object in a queue.
2. DEQUEUE_<Lockobject name>. To remove the object is being queued through above FM.
You have to use these function module in your program.
check this link for example.
http://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm
tables:vbak.
call function 'ENQUEUE_EZLOCK3'
exporting
mode_vbak = 'E'
mandt = sy-mandt
vbeln = vbak-vbeln
X_VBELN = ' '
_SCOPE = '2'
_WAIT = ' '
_COLLECT = ' '
EXCEPTIONS
FOREIGN_LOCK = 1
SYSTEM_FAILURE = 2
OTHERS = 3
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
SEARCH HELPS
1) Elementary search helps describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
2) Collective search helps combine several elementary search helps. A collective search help thus can offer several alternative search paths.
3)An elementary search help defines the standard flow of an input help.
4) A collective search help combines several elementary search helps. The user can thus choose one of several alternative search paths with a collective search help.
5)A collective search help comprises several elementary search helps. It combines all the search paths that are meaningful for a field.
6)Both elementary search helps and other search helps can be included in a collective search help. If other collective search helps are contained in a collective search help, they are expanded to the level of the elementary search helps when the input help is called.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee38446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee45446011d189700000e8322d00/content.htm
pls go through this for search help creation
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm
Search Help Exits:
Re: dynamic values for search help
Re: Dynamic search help
Match code objects are same as Search helps, where they are used in Previous versions of SAP.
Now in the newer versions Search helps are replaced them.
Standard Texts are the texts which are maintained in SO10 Tcode
Every SAP application document is maintained with HEADER and ITEM texts
and these texts are fetched from SAP using the READ_TEXT Function module
by passing TEXT ID, TEXTNAME,TEXTOBJECT and LANGUAGE fields
You can double click on any long text in the systesm and you can see these paramters in the text editor.
Text Modules are created and used in Smartforms.
check these links
http://www.sap-img.com/abap/attach-a-search-help-to-the-screen-field.htm
http://help.sap.com/saphelp_webas620/helpdata/en/cf/21ee2b446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/97/24a23fa34ffb47e10000000a114084/content.htm
Reward points if useful
Regards
Pavan

How to pass the value to "Assignment" when submit the program RFITEMGL?

Hello friends,
I want to submit program RFITEMGL (t-code FBL3N) with some screen fields, some fields are OK to fill such as u201COpen at key dateu201D， u201CG/L accountu201D and u201CCompany codeu201D。 But for the field "Assignment" (It will appear after cilck Dynamic Selection), I don't know how to pass value to it.
Could you help me about how to pass the value to "Assignment" when submit the program RFITEMGL (t-code FBL3N) ?
Thanks a lot!

Hi,
Well you can create a small BDC.
Regards,
Harsh Bansal

How to pass the value of an Excel cell to XL Reporter

Hi guys,
I'm posting this here because no one could help at yahoo's XLR group.
My problem is I need to passa the value of an Excel cell to ixGetData.
Searching I found there where 3 possible ways,
1)      =ixGetData("manager"; "RLH6J"; "[Pelissari].[dbo].[RelContas_a_Receber]"; " CardCode, CardName"; " CardCode ="&B6)
2)      =ixGetData("manager"; "RLH6J"; "[Pelissari].[dbo].[RelContas_a_Receber]"; " CardCode, CardName "; " CardCode =Cell("Contents", B6))
3)      =ixGetData("manager"; "RLH6J"; "[Pelissari].[dbo].[RelContas_a_Receber]"; " CardCode, CardName "; " CardCode = Cell(B6))
The problem is none of them are working!
Can anyone help me, please?
Thanks!
Edited by: Darius Heydarian on Mar 27, 2008 11:44 AM

I'm sorry, I dont have the perfect solution.
I ceated a UDT [@Params] or UDF where the user has to insert the values for XL Reports (for exampel CardCode). After the User inserted the value he can start the XL-Report which are reading from this UDT or UDF the value into the GetData function. You must only insert a query into the condition of GetData :
=ixGetData("manager"; "RLH6J"; "Pelissari.dbo.RelContas_a_Receber"; " CardCode, CardName"; " CardCode = (SELECT Name FROM [@Params] WHERE ID='XL-CardCode')")
If you will find some other possibilty please let me know.
Hannes

Hiding Hit list popup and getting multiple values in Search help

Hi,
I have a special requirement where I am using a search help for filtering data. My requiremetn is the data which I am getting in Hit list popup, I want all that data in a internal table for further processing also I dont want that hit list popup. Is there any method or something which can be used in search help exit to hide the hit list popup dialog and returning all the records which is fetchec in the record_tab.
Thanks
Tanmaya
Edited by: Tanmaya31 on Dec 16, 2011 6:52 AM

Hi,
I dont think you can make thru search help. Instead, I can advise you:
Instead of using a search help for multiple selection, have a button placed at the table control, so that once you press that, you get the desired values(just as in SH) in an ALV display. Then you can make multiple selection and call the table control again and pass the values to the internal table used for the table control, so that the table is filled with the desired values.
Hope this helps you.
vamsi

How Do I Pass The Value Of My Custom PSObject Into A Winforms Multiline Inputbox?

Hello all!
I've tried to just pass the value of my custom object by doing $Inputbox.Text = $CustomObject but i only get whitespaces in my inputbox. I also tried $CustomObject.tostring() and get "SystemObject[]"
Thanks for the help!!

Thanks so much for the reply! It helps alot.
I guess it's more than just one object. It's an array of PSObjects. It gathers local user account properties and drops it into an array of objects. it contains things like, account name, descriptions, password expiration information, if it's disabled or
not... things like that. Just a bunch of text fields. it's created by
$AllLocalUsers += $Users | Foreach-Object {
(code to search for account properties...)
New-Object PSObject -Property @{
Name = $_.Name
Disabled = $_.Disabled
(etc...)
When I type $AllLocalUsers in the console, it will print all the objects information but when I try to do that in a text box, ie $textbox.text = $AllLocalUsers, It gives me about 33 white spaces, the number of objects in the array, and nothing else.

Job scheduling(passing the values to the child program)

when i'm trying to schedule a background job(using job_open job_submit and job_close) i'm passing the values of the selection screen(parent program) to my child program using set parameter id. And trying to get the values using get parameter id in the cild program.
But the values of the parent program are not being passed to the child program what may be the cause for it?

rathan,
Why con't you use
SUBMIT... [VIA SELECTION-SCREEN]
[USING SELECTION-SET <var>]
[WITH <sel> <criterion>]
[WITH FREE SELECTIONS <freesel>]
[WITH SELECTION-TABLE <rspar>].
When you start an executable program, the standard selection screen normally appears, containing the selection criteria and parameters of both the logical database connected to the program and of the program itself (see Direct Execution - Reports). When you start an executable program using SUBMIT, there are various additions that you can use to fill the input fields on the selection screen:
SUBMIT... [VIA SELECTION-SCREEN]
[USING SELECTION-SET <var>]
[WITH <sel> <criterion>]
[WITH FREE SELECTIONS <freesel>]
[WITH SELECTION-TABLE <rspar>].
These options have the following effects:
VIA SELECTION-SCREEN
The selection screen of the called executable program (report) appears. If you transfer values to the program using one or more of the other options, the corresponding input fields in the selections screen are filled. The user can change these values. By default, the system does not display a selection screen after SUBMIT.
USING SELECTION-SET <var>
This option tells the system to start the called program with the variant <var>.
WITH <sel> <criterion>
Use this option to fill individual elements <sel> of the selection screen (selection tables and parameters). Use one of the elements <criterion>:
<op> <f> [SIGN <s>], for single value selection
If <sel> is a selection criterion, use <op> to fill the OPTION field, <f> to fill the LOW field, and <s> to fill the SIGN field of the selection table <sel> in the called program.
If <sel> is a parameter, you can use any operator for <op>. The parameter <sel> is always filled with <f>.
[NOT] BETWEEN <f1> AND <f2> [SIGN <s>], for interval selection
<f1> is transferred into the LOW field, <f2> into the HIGH field, and <s> into the SIGN field of the selection table <sel> in the called program. If you omit the NOT option, the system places the value BT into the OPTION field; if you use NOT, the system fills OPTION with NB.
IN <seltab>, transferring a selection table
This addition fills the selection table <sel> in the called program with the values of the table <seltab> in the calling program. Table <seltab> must have the structure of a selection table. Use the RANGES statement to create selection tables.
WITH FREE SELECTION <freesel>, user dialog for dynamic selections
To use this option, the called program must be connected to a logical database that supports dynamic selections. In the calling program, use the function modules FREE_SELECTIONS_INIT and FREE_SELECTIONS_DIALOG. They allow the user to enter dynamic selections on a selection screen. One export parameter of these function modules has structure RSDS_TEXPR from the RSDS type group. Transfer the values of this export parameter by means of the internal table <freesel> of the same structure to the called report.
WITH SELECTION-TABLE <rspar>, dynamic transfer of values
You need an internal table <rspar> with the Dictionary structure RSPARAMS. The table then consists of the following six fields:
SELNAME (type C, length 8) for the name of the selection criterion or parameter
KIND (type C, length 1) for the selection type (S for selection criterion, P for parameter)
SIGN, OPTION, LOW, HIGH as in a normal selection table, except that LOW and HIGH both have type C and length 45.
This table can be filled dynamically in the calling program with all of the required values for the selection screen of the called program. If the name of a selection criterion appears more than once, the system creates a multiple-line selection table for that criterion in the called program. If the name of a parameter appears more than once, the system uses the last value. Note that LOW and HIGH have type C, so that the system executes type conversions to the criteria of the called program. This is important for date fields, for example. Before your program is used in a live context, you should check it using the VIA SELECTION-SCREEN addition.
Except for WITH SELECTION-TABLE, you can use any of the above options several times and in any combination within a SUBMIT statement. In particular, you can use the WITH <sel> option several times for one single criterion <sel>. In the called program, the system appends the corresponding lines to the selection tables used. For parameters, it uses the last value specified. The only combination possible for the WITH SELECTION-TABLE option is USING SELECTION-SET.
If the input fields on the selection screen are linked to SPA/GPA parameters, you can also use this technique to pass values to the selection screen (see Passing Data Between Programs).
The following executable program (report) creates a selection screen containing the parameter PARAMET and the selection criterion SELECTO:
REPORT demo_program_submit_rep1.
DATA number TYPE i.
PARAMETERS      paramet(14) TYPE c.
SELECT-OPTIONS selecto FOR number.
The program DEMO_PROGRAM_SUBMIT_REP1 is called by the following program using various parameters:
REPORT demo_program_submit_sel_screen NO STANDARD PAGE HEADING.
DATA: int TYPE i,
      rspar TYPE TABLE OF rsparams,
      wa_rspar LIKE LINE OF rspar.
RANGES seltab FOR int.
WRITE: 'Select a Selection!',
SKIP.
FORMAT HOTSPOT COLOR 5 INVERSE ON.
WRITE: 'Selection 1',
     / 'Selection 2'.
AT LINE-SELECTION.
CASE sy-lilli.
    WHEN 4.
      seltab-sign = 'I'. seltab-option = 'BT'.
      seltab-low = 1.   seltab-high   = 5.
      APPEND seltab.
      SUBMIT demo_program_submit_rep1 VIA SELECTION-SCREEN
                      WITH paramet eq 'Selection 1'
                      WITH selecto IN seltab
                      WITH selecto ne 3
                      AND RETURN.
    WHEN 5.
      wa_rspar-selname = 'SELECTO'. wa_rspar-kind = 'S'.
      wa_rspar-sign = 'E'. wa_rspar-option = 'BT'.
      wa_rspar-low = 14. wa_rspar-high = 17.
      APPEND wa_rspar TO rspar.
      wa_rspar-selname = 'PARAMET'. wa_rspar-kind = 'P'.
      wa_rspar-low = 'Selection 2'.
      APPEND wa_rspar TO rspar.
      wa_rspar-selname = 'SELECTO'. wa_rspar-kind = 'S'.
      wa_rspar-sign = 'I'. wa_rspar-option = 'GT'.
      wa_rspar-low = 10.
      APPEND wa_rspar TO rspar.
      SUBMIT demo_program_submit_rep1 VIA SELECTION-SCREEN
                      WITH SELECTION-TABLE rspar
                      AND RETURN.
ENDCASE.
Pls. reward if useful...

Dynamically passing the values to search help

Similar Messages

Maybe you are looking for