Dynamically passing the values to IN query in JDBC

Hi,
I have a list which contains a single or multiple values which does have CustomerVO as a generic.Here i need to iterate the list pass these values to "IN" query.
These should happen dynamically, as we dont know whether the list will hold a single or multiple value. If the list.size ==1 , then it contains a single value in it. Hence there is no need for a comma(,) in the IN query else we need to have it, like .... IN (Aaron,Bob). Please help me in this?
Thanks.

797836 wrote:
I have a list which contains a single or multiple values which does have CustomerVO as a generic.Here i need to iterate the list pass these values to "IN" query.
These should happen dynamically, as we dont know whether the list will hold a single or multiple value. If the list.size ==1 , then it contains a single value in it. Hence there is no need for a comma(,) in the IN query else we need to have it, like .... IN (Aaron,Bob).So basically you need to output the List (capital 'L') as a comma-delimited list (small 'l').
The procedure for that is usually something like:
1. Output the first element.
2. For any further elements:
2a. Output ","
2b. Output the element.
Winston

Similar Messages

Dynamically passing the values to search help

hi
can I pass some values dynamically to search help input field.
If I select a profit centre value from a drop down in separate field it should reflect the corresponding values in
search help which is cost centre input field ( i/p fields is in a column of a UI element table).
If I add one more row also the corresponding column should bears the search help...
thanx in advance.......

Data dictionary based search helps can have multiple importing parameters within Web Dynpro. There are few rules that are documented in the online help however:
Be aware that import and export parameters for the search help are determined only within the same context node (see also Transport of Values for the Input Help), and even then only if a Dictionary structure is assigned to the node.
http://help.sap.com/saphelp_nw70/helpdata/EN/35/bdb6e2c48411d1950800a0c929b3c3/frameset.htm

Dynamically setting the values for the Adapter Configuration in BPEL

We are configuring the JMS adapter to put into an MQ topic. For this we are giving all the values for the configuration parameters like
Factory Properties.
JMS connection Factory
Transacted
Destination Type
Username
Password
Destination Name, etc...
and we are able to produce message on the MQ.
Our requirement is to dynamically pass the values for the above parameters from some configuraion files(other than oc4j-ra.xml), which will have value for each obove parameters.
Any help on this is highly appreciated.
Regards,
Suman

Re: JMS Properties setup
this thread will explain how to do it.

Dynamically setting the values for the Adapter Configuration

We are configuring the JMS adapter to put into an MQ topic. For this we are giving all the values for the configuration parameters like
Factory Properties.
JMS connection Factory
Transacted
Destination Type
Username
Password
Destination Name, etc...
and we are able to produce message on the MQ.
Our requirement to dynamically pass the values for the above parameters from some configuraion files(other that oc4j-ra.xml), which will have value for each obove parameters
Any help on this is highly appreciated.

Re: JMS Properties setup
this thread will explain how to do it.

How to pass the value dynamically in exp/imp utilities of oracle

I want to pass the value of org_grp_i dynamically,instead of passing the value
19.Can you please tell how to write the script to this
exp fas/xxxxxx@fasbd001 file=audit_grn_28aug.dmp tables=audit_grn query=\"where org_grp_i=19 \"
where xxxxxx is the password
Thanks

You need to make use of command line arguments. You can go through this link for example.
http://www.freeos.com/guides/lsst/ch02sec14.html
In your shell script(say test.sh) you can have
exp fas/xxxxxx@fasbd001 file=audit_grn_28aug.dmp tables=audit_grn query=\"where org_grp_i=$1 \"$1 indicates it accepts the first argument from command line. if you want to pass 19, add that next to the script you're executing.
From command line you can call this shell script say test.sh 19

Job scheduling(passing the values to the child program)

when i'm trying to schedule a background job(using job_open job_submit and job_close) i'm passing the values of the selection screen(parent program) to my child program using set parameter id. And trying to get the values using get parameter id in the cild program.
But the values of the parent program are not being passed to the child program what may be the cause for it?

rathan,
Why con't you use
SUBMIT... [VIA SELECTION-SCREEN]
[USING SELECTION-SET <var>]
[WITH <sel> <criterion>]
[WITH FREE SELECTIONS <freesel>]
[WITH SELECTION-TABLE <rspar>].
When you start an executable program, the standard selection screen normally appears, containing the selection criteria and parameters of both the logical database connected to the program and of the program itself (see Direct Execution - Reports). When you start an executable program using SUBMIT, there are various additions that you can use to fill the input fields on the selection screen:
SUBMIT... [VIA SELECTION-SCREEN]
[USING SELECTION-SET <var>]
[WITH <sel> <criterion>]
[WITH FREE SELECTIONS <freesel>]
[WITH SELECTION-TABLE <rspar>].
These options have the following effects:
VIA SELECTION-SCREEN
The selection screen of the called executable program (report) appears. If you transfer values to the program using one or more of the other options, the corresponding input fields in the selections screen are filled. The user can change these values. By default, the system does not display a selection screen after SUBMIT.
USING SELECTION-SET <var>
This option tells the system to start the called program with the variant <var>.
WITH <sel> <criterion>
Use this option to fill individual elements <sel> of the selection screen (selection tables and parameters). Use one of the elements <criterion>:
<op> <f> [SIGN <s>], for single value selection
If <sel> is a selection criterion, use <op> to fill the OPTION field, <f> to fill the LOW field, and <s> to fill the SIGN field of the selection table <sel> in the called program.
If <sel> is a parameter, you can use any operator for <op>. The parameter <sel> is always filled with <f>.
[NOT] BETWEEN <f1> AND <f2> [SIGN <s>], for interval selection
<f1> is transferred into the LOW field, <f2> into the HIGH field, and <s> into the SIGN field of the selection table <sel> in the called program. If you omit the NOT option, the system places the value BT into the OPTION field; if you use NOT, the system fills OPTION with NB.
IN <seltab>, transferring a selection table
This addition fills the selection table <sel> in the called program with the values of the table <seltab> in the calling program. Table <seltab> must have the structure of a selection table. Use the RANGES statement to create selection tables.
WITH FREE SELECTION <freesel>, user dialog for dynamic selections
To use this option, the called program must be connected to a logical database that supports dynamic selections. In the calling program, use the function modules FREE_SELECTIONS_INIT and FREE_SELECTIONS_DIALOG. They allow the user to enter dynamic selections on a selection screen. One export parameter of these function modules has structure RSDS_TEXPR from the RSDS type group. Transfer the values of this export parameter by means of the internal table <freesel> of the same structure to the called report.
WITH SELECTION-TABLE <rspar>, dynamic transfer of values
You need an internal table <rspar> with the Dictionary structure RSPARAMS. The table then consists of the following six fields:
SELNAME (type C, length 8) for the name of the selection criterion or parameter
KIND (type C, length 1) for the selection type (S for selection criterion, P for parameter)
SIGN, OPTION, LOW, HIGH as in a normal selection table, except that LOW and HIGH both have type C and length 45.
This table can be filled dynamically in the calling program with all of the required values for the selection screen of the called program. If the name of a selection criterion appears more than once, the system creates a multiple-line selection table for that criterion in the called program. If the name of a parameter appears more than once, the system uses the last value. Note that LOW and HIGH have type C, so that the system executes type conversions to the criteria of the called program. This is important for date fields, for example. Before your program is used in a live context, you should check it using the VIA SELECTION-SCREEN addition.
Except for WITH SELECTION-TABLE, you can use any of the above options several times and in any combination within a SUBMIT statement. In particular, you can use the WITH <sel> option several times for one single criterion <sel>. In the called program, the system appends the corresponding lines to the selection tables used. For parameters, it uses the last value specified. The only combination possible for the WITH SELECTION-TABLE option is USING SELECTION-SET.
If the input fields on the selection screen are linked to SPA/GPA parameters, you can also use this technique to pass values to the selection screen (see Passing Data Between Programs).
The following executable program (report) creates a selection screen containing the parameter PARAMET and the selection criterion SELECTO:
REPORT demo_program_submit_rep1.
DATA number TYPE i.
PARAMETERS      paramet(14) TYPE c.
SELECT-OPTIONS selecto FOR number.
The program DEMO_PROGRAM_SUBMIT_REP1 is called by the following program using various parameters:
REPORT demo_program_submit_sel_screen NO STANDARD PAGE HEADING.
DATA: int TYPE i,
      rspar TYPE TABLE OF rsparams,
      wa_rspar LIKE LINE OF rspar.
RANGES seltab FOR int.
WRITE: 'Select a Selection!',
SKIP.
FORMAT HOTSPOT COLOR 5 INVERSE ON.
WRITE: 'Selection 1',
     / 'Selection 2'.
AT LINE-SELECTION.
CASE sy-lilli.
    WHEN 4.
      seltab-sign = 'I'. seltab-option = 'BT'.
      seltab-low = 1.   seltab-high   = 5.
      APPEND seltab.
      SUBMIT demo_program_submit_rep1 VIA SELECTION-SCREEN
                      WITH paramet eq 'Selection 1'
                      WITH selecto IN seltab
                      WITH selecto ne 3
                      AND RETURN.
    WHEN 5.
      wa_rspar-selname = 'SELECTO'. wa_rspar-kind = 'S'.
      wa_rspar-sign = 'E'. wa_rspar-option = 'BT'.
      wa_rspar-low = 14. wa_rspar-high = 17.
      APPEND wa_rspar TO rspar.
      wa_rspar-selname = 'PARAMET'. wa_rspar-kind = 'P'.
      wa_rspar-low = 'Selection 2'.
      APPEND wa_rspar TO rspar.
      wa_rspar-selname = 'SELECTO'. wa_rspar-kind = 'S'.
      wa_rspar-sign = 'I'. wa_rspar-option = 'GT'.
      wa_rspar-low = 10.
      APPEND wa_rspar TO rspar.
      SUBMIT demo_program_submit_rep1 VIA SELECTION-SCREEN
                      WITH SELECTION-TABLE rspar
                      AND RETURN.
ENDCASE.
Pls. reward if useful...

Help Creating A Link In An IR Report Passing The Value From A Different Col

Version 4.0.2.00.07
Hello,
I have an Interactive Report with a column that I need to create a link on but I need to pass the value of another column.
This report shows the Features of a particular Release. There is a select list for the Release that is selected and executes the report.
There is a column that indicates whether the Feature has a Commitment attached to it. If there is have that a link to another report that shows all the Commitments for that Feature by passing the FEATURE_ID which is also a column on the Feature report.
Query:
SELECT
      ,CASE WHEN ft.feature_id IN (SELECT cc.feature_id
                                   FROM customer_commitments cc
                                   WHERE ft.feature_id = cc.feature_id
                                  ) THEN 'Yes' ELSE 'No'
       END "Commitment Exists"
          ,ft.feature_id
FROM ....If "Commitment Exists" has a 'Yes', the 'Yes' is a link that will pass the FEATURE_ID to another report that will show the Commitments for that Feature. If the "Commitment Exists" has a 'No' then no link.
I was also wondering if the Commitment report could open in a seperate window and make it modal?
I hope this is clear and someone could help me.
Please let me know if it's not clear or more information is needed.
Thanks,
Joe

To accomplish this I would build the link as part of the value. So if Yes the Yes itself would be a link, if No is simply text as today.
It would look something like this:
SELECT
      ,CASE WHEN ft.feature_id IN (SELECT cc.feature_id
                                   FROM customer_commitments cc
                                   WHERE ft.feature_id = cc.feature_id
       THEN
        '<a href="f?p=&APP_ID.:NEW_PAGE:&SESSION.::::Pn_FEATURE_ID:' || ft.feature_id || '">Yes</a>'
       ELSE
        'No'
       END "Commitment Exists"
          ,ft.feature_id
FROM ....One problem with this approach is when you export the report (as a CSV for example). There are a few ways to handle this, one is to simply duplicate the column with clear text yes and no and set this column to be included on export and only visible on export. The other column, with the link, set it to no export.
The other option is to add another condition on the REQUEST value.
SELECT
      ,CASE WHEN ft.feature_id IN (SELECT cc.feature_id
                                   FROM customer_commitments cc
                                   WHERE ft.feature_id = cc.feature_id
       THEN
              decode(:REQUEST, 'CSV', 'Yes'
            , '<a href="f?p=&APP_ID.:NEW_PAGE:&SESSION.::::Pn_FEATURE_ID:' || ft.feature_id || '">Yes</a>'
       ELSE
        'No'
       END "Commitment Exists"
          ,ft.feature_id
FROM ....It seems that the link itself is getting replaced with a #. The link would look something like this:
'f?p=&APP_ID.:NEW_PAGE:&SESSION.::::Pn_FEATURE_ID:' || ft.feature_id
Hope this helps.
Oh and of course, in order for the link to display you need to change the Display Type to "Standard Report Column" otherwise the HTML will be escaped.
Thanks
-Jorge

How to pass the values to stored proc using presentation variable in OBIEE

Need your help regarding in resolving an issue in OBIEE 10.1.3.4.1
There are 6 reports say ‘A’,’B’,’C’,’D’,’E’,’F’ in the same subject area.
The reports are being configured with prompts using either the repository/presentation variables.
One of the reports say ‘A’ has been configured to pass the values using presentation variables from the prompt in Advanced Tab of the report request to the stored procedure defined in the Execute Before Query section of the connection pool.
After running another report ‘B’ in the same subject area, upon visiting the report ‘A’ view display error is being seen ( Please have a look below screen shot for your reference) .
Speculate the issue is around presentation variables of report ‘A’ getting initialized even before running the report.
Appreciate your earliest advise as this is a prod issue.

Hi Prasad,
I got your note, you should not use Session variable syntax to call presentation variable.
you should use like @{AIC_PROJ_PLAT_SEQ_NO}
One more thing: first test the variable AIC_PROJ_PLAT_SEQ_NO value then try to pass to SP.
Hope this helps

Unable to pass the values to stored proc using presentation variable in OBI

Hi All,
Need your help regarding in resolving an issue in OBIEE 10.1.3.4.1
There is an OBIEE requirement whereby two prompts need to be defined.
1. Textbox prompt
2. Drop-down prompt
The dropdown values should be populated using textbox prompt. So, we have used presentation variable in textbox prompt and passing the same to select query of drop-down.
Until this step, the report works just fine.
Now, the value in both textbox and drop-down needs to be passed to stored proc.
While trying to pass the values by using the presentation variable, the following error comes-up saying
Session variable has no value definition.
Note:Although the corresponding session variable has been set to default value,still the error appears.
Please advise.
Regards,
Prasad

"Session variable has no value definition" I'm assuming typo error and it should be presentation variable.
Set default value for presentation variable that may work

Passing the values between two pages

hi all,
I am trying to pass the value from one page to another page. by referring the Link
http://www.youtube.com/watch?v=4eyzBiIf5MM&feature=related
I have created the code based on the demo. it is deployed without any issues. but when i press the hyperlink from the first page it is not moving to the second page.
Regards
C.Karukkuvel

Hi john,
My Requirement is to create a ADF page based on the Human Task with the Default payload. In that page when the user presses the empid link field, It will show all the information related to the employee id in a separate page.
so ,
1. i have created the View Object based on the Query with where clause
2. Create a bind variable for the where clause
3.Created s new page for displaying the employee details
4.drag and drop the both the pages (employee details, default page created by human task) into the adfcconfig file.
5.drag and drop the Execute with params into the adfcconfig file
6.wire it from human task page --> execute with params--> Employee details page
7.change the employee field in that human task page to a link field.
8.drag and drop the set property listener to that employee field.
Testing
Enter the input values for the Web service, logging to the BPM worklist, double click that task .it is showing the details when I press the employee id it is not navigating to the employee details page.
Thanks in advance
C.Karukkuvel

Passing the values from subreport to master report in JasperReports

Hi All,
I want to pass the values from subreport to master report, but my subreport is without any query.
Please help me in this regard. its urgent.
Thanks & Regards
Kris

Hi,
Below link may help you
http://jasperreports.sourceforge.net/tips.tricks.html#returnvalues
regards
MJ

To pass the values through variable in JDBC adapter

Hello,
We are working in JDBC adapter. Currently we have written the select statement in JDBC sender adapter to select all the values from the table in SQL SERVER.
Instead of this, Can we use a variable and pass the values in there from XI in order to select the records from the table based on values in the variable?
Expecting Advice!
Thanks,
Lakshmi.

Hi krishnan,
You can use the JDBC receiver adapter to acheive a select using variables. Here you create a canonical XML format(your XSD) based on which the JDBC receiver adapter issues a select and returns you the response. chk this url in help site http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm for the canonical format.
However u lose the flexibility of polling the table at regular tables available with sender adapter. Also you need an event(a message) to trigger this select query execution, since it is a receiver CC config.
-Saravana

Dynamically Pass the Column Name cursor. || Dynamic Column Name

Hi,
I need to dynamically pass the column name based on a Mapping table in a loop ( Right now i have hardcoded stuff )just like using Execute immediate.... Inside the procedure, I have commented as where i hit the problem.
Thanks for all of your time...
Thanks
Muthu
CREATE OR REPLACE PROCEDURE xml_testing_clob AS
doc xmldom.DOMDocument;
main_node xmldom.DOMNode;
root_node xmldom.DOMNode;
user_node xmldom.DOMNode; item_node xmldom.DOMNode;
root_elmt xmldom.DOMElement;
item_elmt xmldom.DOMElement;
item_text xmldom.DOMText;
item_test xmldom.DOMText;
nodelist xmldom.DOMNodeList;
sub_variable varchar2(4000);
x varchar2(200);
y varchar2(200);
sub_var varchar2(4000);
CURSOR get_users IS
SELECT FIRST_NAME,LAST_NAME,ROWNUM FROM USER_INFO_TBL WHERE WEIN_NUMBER = '1234' ;
CURSOR get_cdisc_name IS
select CTS_COL_NAME,CDISC_NAME from CTS2CDISC_DICTIONARY where CTS_TABLE_NAME = 'USER_INFO_TBL';
BEGIN
-- get document
doc := xmldom.newDOMDocument;
doc := xmldom.NewDomDocument;
xmldom.setVersion(doc, '1.0');
xmldom.setStandalone(doc, 'no');
xmldom.setCharSet(doc, 'ISO-8859-1');
-- create root element main_node := xmldom.makeNode(doc);
root_elmt := xmldom.createElement(doc,'AdminData');
root_node := xmldom.appendChild(main_node,xmldom.makeNode(root_elmt));
FOR get_users_rec IN get_users LOOP
item_elmt := xmldom.createElement(doc,'User');
xmldom.setAttribute(item_elmt,'OID' , get_users_rec.rownum);
user_node := xmldom.appendChild(root_node,xmldom.makeNode(item_elmt));
FOR cv_get_cdisc_name IN get_cdisc_name LOOP
EXIT WHEN get_cdisc_name%NOTFOUND;
sub_var := cv_get_cdisc_name.cts_col_name;
sub_variable := 'get_users_rec.';
sub_variable := 'get_users_rec.'||cv_get_cdisc_name.cts_col_name;
x := sub_variable;
dbms_output.put_line(x); -------------- Here i just see the literal string
y := get_users_rec.FIRST_NAME;
dbms_output.put_line(y); -------------- Here i just see actual value ( data )
item_elmt := xmldom.createElement(doc,cv_get_cdisc_name.cdisc_name);
item_node := xmldom.appendChild(user_node,xmldom.makeNode(item_elmt));
item_text := xmldom.createTextNode(doc,x ); ---- This is the place i am hitting with an error .
If i use variable X then i am able to see only the literal
string in the output. BUT if i put cursor name.coulmname,
then the resumt (XML) is fine.I wanted acheive this
dynamically just like execute Immediate
item_node := xmldom.appendChild( item_node , xmldom.makeNode(item_text));
END LOOP;
END LOOP;
-- write document to file using default character set from database
xmldom.WRITETOCLOB(doc,);
xmldom.writeToFile(doc, 'c:\ash\testing_out.xml');
-- free resources
xmldom.freeDocument(doc);
END;
+++++++++++++++++++++++++++++++++++ XML OUTPUT +++++++++++++++++++++++++++++++++++++++++
<?xml version="1.0" ?>
- <AdminData>
- <User OID="1">
<FirstName>get_users_rec.FIRST_NAME</FirstName>
<LastName>get_users_rec.LAST_NAME</LastName> </User>
- <User OID="2">
<FirstName>get_users_rec.FIRST_NAME</FirstName>
<LastName>get_users_rec.LAST_NAME</LastName>
</User>
- <User OID="3">
<FirstName>get_users_rec.FIRST_NAME</FirstName>
<LastName>get_users_rec.LAST_NAME</LastName>
</User>
- <User OID="4">
<FirstName>get_users_rec.FIRST_NAME</FirstName>
<LastName>get_users_rec.LAST_NAME</LastName>
</User>
- <User OID="5">
<FirstName>get_users_rec.FIRST_NAME</FirstName>
<LastName>get_users_rec.LAST_NAME</LastName>
</User>
++++++++++++++++++++++++++++++++++++++++++++++++++++ MAPPING TABLE DETAILS +++++++++++++++++
CTS_COL_NAME     CDISC_NAME     CTS_TABLE_NAME     XML_TAG     -----------> Column Name
FIRST_NAME     FirstName     USER_INFO_TBL     Element     -----------> Records
LAST_NAME     LastName     USER_INFO_TBL     Element     -----------> Records

My scenario is little different, let me explain:
My columns will remain same but values changes (based on column formula) according to the selected prompt value
If I select 'Oct' from prompt then
Curr will contain data for 'Oct' only
Next1 will contain data for 'Nov' only
Next2 will contain data for 'Dec' only
Next3 will contain data for 'Jan' of next year only.
Later if I select 'Jul' from prompt then
Curr will contain data for 'Jul' only
Next1 will contain data for 'Aug' only
Next2 will contain data for 'Sep' only
Next3 will contain data for 'Oct' only.
I don't have different columns for each months but the columns are capable to reflect data for any month.
So, how can I reflect the column name as month name for which that contains data.
Regards,
S Anand

How to pass the value to "Assignment" when submit the program RFITEMGL?

Hello friends,
I want to submit program RFITEMGL (t-code FBL3N) with some screen fields, some fields are OK to fill such as u201COpen at key dateu201D， u201CG/L accountu201D and u201CCompany codeu201D。 But for the field "Assignment" (It will appear after cilck Dynamic Selection), I don't know how to pass value to it.
Could you help me about how to pass the value to "Assignment" when submit the program RFITEMGL (t-code FBL3N) ?
Thanks a lot!

Hi,
Well you can create a small BDC.
Regards,
Harsh Bansal

How to pass the value from Sub report to main report

I have un report(mainreport) within a subreport(subreport).
With reporting services, how to pass the value from Sub report to main report?
thanks

Hi Alebet,
With reporting services to pass values from sub report in to main report is not supported directly.
But there are some workarounds through which you can get this .
There are two ways to get this.
1- Put your sub report query into some table. i mean to say through the subreport query get some temporary table.
2- Using this temporary tables data write some Scala function in the data base.
3- Now in your main report query return this scala function as a column.
4- Extract the column value where ever you want in your main report which is getting calculated from the subreport query. so you will be getting the values returned from the subreport in the main report.
This will definitely work fine as i have done some report in this way.
Another way of doing is that
1- prepare another data set with the same query as in sub report in the data tab.
2- then refer this 2nd dataset in your main report .
But better way will be the top one.
Anyway please let me know if you get the solution.
Thanks
Mahasweta

Dynamically passing the values to IN query in JDBC

Similar Messages

Maybe you are looking for