Dynamically retrieving email content

hi,
I am doing one web application in JSP.In that project,i want to download the email contents and attachment came to a particular email.
I did this retreiving from emails whenever i clicks on a link.
it is working fine.and i am able to retrieve the email content perfectly.
Now i want to do thie retrieving without clicking any link or button,it has dynamically retreive the content from the mail.
Is it possible to make the retrieving code running in the background whenever i logs into the application?
If so can anyone tell me how to make a background process using jsp?
Thanks a lot

Hi
Most of what you want is here -
www.gotoandlearn.com
Check out the 3 Carousel Tutorials, although its not a
horizontal navbar is does everything else you want
Hope it helps

Similar Messages

Dynamic email content

Is it possible to place an email activity within a process flow and dynamically pass a subject/message to it.
We are currently using OWB 9.0.4 and are in the process of upgrading to 9.2.0.2.8.
Thanks,
Dave

At the moment, there is no way to dynamically change the content of the message (you have to type it in when defining the e-mail operator parameters.
Regards:
Igor

I can no longer read Japanese email content

Email content from Japanese friends is no longer displaying correctly. When I change the character encoding in the 'view' menu, it changes the display of the data in the subject list only. Help!

The view menu you are referring to is an extension of your web browser and is not supported directly through Verizon. I did find a link below that might provide some insight to your situation.
http://answers.microsoft.com/en-us/ie/forum/ie8-windows_other/japanese-characters-are-unreadable-in-...
Eric_VZ
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

Can send but not retrieve emails using Thunderbird and Windows 8.1

Hi, I am not able to get Thunderbird to retrieve emails on a new laptop.
Last week I purchased a new laptop due to an imminent hard disk failure on my old laptop. I will call them "Old" and "New" laptops. (Old laptop is still working for the moment...)
The Old laptop is nearly 3 years old, and I have been using Thunderbird on it since new without any problems.
I have downloaded and installed Thunderbird on the New laptop, and can not get it to retrieve emails.
As the Old laptop is still working (at the moment), I am able to directly visually compare and check settings on both computers.
THE PROBLEM
Using Thunderbird on the New laptop, I am able to send emails, I can see all my old emails restored from the Old laptop using Mozbackup, but clicking Get Mail on the New laptop does not retrieve new
emails.
When I click Get Mail, the status message in the bottom left corner says "connected to .....<ISP>..." but does not actually get the emails. However, the Old laptop is still able to get emails as it always has.
My ISP is a large Australian telco that I have used for many years and I have not changed anything with my account. The ISP is POP3.
WHAT HAVE I TRIED
I deleted the email account created by restoring from Mozbackup, and attempted using the Thunderbird new account wizard, however Thunderbird did not recognise my ISP and would not create the account - even though it is working perfectly at the same time on the Old laptop.
All Firewalls I can find have been configured to allow Thunderbird, with the same configuration settings on both machines.
How do I know I can send but not Get emails from Thunderbird on the New laptop?
I have sent test emails to myself from the New laptop. Thunderbird sends successfully, I am able to preview the test emails via Mailwasher on the New laptop, and can read, reply, etc, to the emails if I log into my ISP webmail service. However I can NOT get Thunderbird to retrieve and download these emails on the New laptop. If I go to the Old laptop, Thunderbird works perfectly, retrieves and downloads all new emails, including these test emails.
I am now at the point where I do not know what else to try and would appreciate any suggestions.....
I have spent many hours over the last 3 days surfing the net, forums, Mozilla Support, etc, and tried everything suggested, without success. The only thing I have NOT tried is starting windows in Safe mode (as per some suggestions), as it is not a viable long term solution.
OTHER INFO
Computer Details;-
"Old" laptop;-
Windows 7 Home Premium - continuously updated with all Critical and Important updates. 64 bit version.
Antivirus = Bitdefender Total Security (subscription and licensed). Up to date.
MailwasherPro 2012 (subscription and licensed). Up to date.
Thunderbird 24.5.0 working perfectly. Up to date.
"New" laptop;-
Windows 8.1 - up to date with all Critical and Important updates. 64 bit version.
Antivirus = Bitdefender Total Security (subscription and licensed) - downloaded and installed. Up to date.
MailwasherPro 2012 (subscription and licensed) - downloaded and installed. Up to date.
Thunderbird 24.5.0 - downloaded and installed.
Note: I 'downloaded and installed' the Windows 8.1 version of these programs to avoid any potential compatibility problems restoring or copying from a Windows 7 backup version of the programs.
1) New laptop came with pre-installed with McAfee - which has been Uninstalled due to running Bitdefender (Windows searches for 'McAfee' return nothing found suggesting the Uninstall was successful).
2) Thunderbird has been added to both Bitdefender and Windows 8.1 firewalls on the New laptop.
3) Bitdefender and Windows security settings are identical on both laptops - as near as I can determine, I may be missing something - but have checked all settings 3 times by doing a side-by-side visual comparison.
4) Thunderbird settings are also identical and I am using the same email address and ISP that I have been using for many years.
5) I migrated Thunderbird settings, accounts and emails from the Old laptop to the New laptop using Mozbackup, then visually checked and compared all settings in Thunderbird between the two machines.
6) For info, I have used Mailwasher for many years as a simple way to preview and wash mail before running email programs such as Thunderbird - might be overkill, but I have also never had a virus or malware problem, so will keep doing this.
7) I have Uninstalled and re-installed Thunderbird on the New laptop twice, and done the same with Bitdefender once.
8) Any config changes I try on the New laptop, I either restart Thunderbird and / or restart the New laptop, or both.
9) I have not created a Windows 8.1 account and am not using SkyDrive.
10) Only other software I have installed on the New laptop is Google Chrome, Office Home 2013 and iTunes - all are working.
Thanks in advance....

Well there is not much left. If telnet works then the path is clear and there is no hardware firewall blocking ports.
All that is left is software, so try windows safe mode with networking. A very handy way to eliminate software. it also actually disables most anti virus resident features and is preferred here because anti virus/security programs do not always disable or turn off when they say they have.
You might also try the McAfee removal tool. https://community.mcafee.com/thread/52788 I notice the rep said yes to both, they did not say not required.
Finally you could try creating a new profile, and see if it works just to exclude corruption of your existing profile. ( I doubt it but I am at the anything goes point)
Just as an aside, I have never had an email borne nasty and I for many years never even had an email virus scanner. So yes I think your a bit over cautious with mailwasher, if that is what your using it for. Thunderbird does not support scripting languages or flash, or most plugins in the email sandbox. The result is getting a virus from a mail in Thunderbird is really only possible, for all practical purposes, if you open that password protected zip from the young Russian woman and that is what the anti virus should be blocking anyway when the temp file is written.

Spry Tabbed panels + Progressive Enhancement and Dynamic Loading of Content With Spry

Is there any way to combine tabbed panels together with "Progressive Enhancement and Dynamic Loading of Content With Spry"?
Visit: http://labs.adobe.com/technologies/spry/articles/best_practices/progressive_enhancement.ht ml#updatecontent
And click on the "Using Spry.Utils.updateContent()"
The 3rd example shows how to use a fade transition whenever the content changes.
I already have tabbed panels. My menu contains buttons (on tabs) and my Content div contains the panels.
Tabs code;
<ul class="TabbedPanelsTabGroup">
          <li class="TabbedPanelsTab">
               <table class="Button" >
                    <tr>
                    <td style="padding-right:0px" title ="Home">
                    <a href="javascript:TabbedPanels1.showPanel(1);" title="Home" style="background-image:url(/Buttons/Home.png);width:172px;height:75px;display:block;"><br/></a>
                    </td>
                    </tr>
               </table>
          </li>
etc
etc
etc
and the panel code:
<div class="TabbedPanelsContent" id="Home">
     CONTENT
</div>
I hoped i can use the example code from the link into my tabbed panels.
I thought this code:
onclick="FadeAndUpdateContent('event', 'data/AquoThonFrag.html'); return false;"
could be added to the tab code like this:
<a href="javascript:TabbedPanels1.showPanel(1);" onclick="FadeAndUpdateContent('event', 'data/AquoThonFrag.html'); return false;" title="Home" style="background-image:url(/Buttons/Home.png);width:172px;height:75px;display:block;"><br/></a>
But the content doesnt fade...
I know i need to change the header etc.
The following is from the link:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xmlns:spry="http://ns.adobe.com/spry">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Aquo Events</title>
<script src="../../../includes/SpryEffects.js" type="text/javascript"></script>
<script src="../../../includes/SpryData.js" type="text/javascript"></script>
<script type="text/javascript">

</script>
<style type="text/css">
/* IE HACK to prevent bad rendering when fading. */
#event { background-color: white; }
</style>
</head>
So i changed my header etc, put the SpryEffects.js and SpryData.js into position and nothing changed...
Is there a way to keep my tabbed panel (or change as less as possible) and let
A. The fade work
B. The loading work.
The problem now is that it loads all pages instead of only the home. Therefore i wanted this Progressive Enhancement.
And the fading part is just because its nice...

It doesnt show in the post but off course i changed this link;
"data/AquoThonFrag.html"
into;
"javascript:TabbedPanels1.showPanel(1);"
I must say i dont know if this even works...

[Forum FAQ] How do I send multiple rows returned by Execute SQL Task as Email content in SQL Server Integration Services?

Question:
There is a scenario that users want to send multiple rows returned by Execute SQL Task as Email content to send to someone. With Execute SQL Task, the Full result set is used when the query returns multiple rows, it must map to a variable of the Object data
type, then the return result is a rowset object, so we cannot directly send the result variable as Email content. Is there a way that we can extract the table row values that are stored in the Object variable as Email content to send to someone?
Answer:
To achieve this requirement, we can use a Foreach Loop container to extract the table row values that are stored in the Object variable into package variables, then use a Script Task to write the data stored in packages variables to a variable, and then set
the variable as MessageSource in the Send Mail Task.
Add four variables in the package as below:
Double-click the Execute SQL Task to open the Execute SQL Task Editor, then change the ResultSet property to “Full result set”. Assuming that the SQL Statement like below:
SELECT   Category, CntRecords
FROM         [table_name]
In the Result Set pane, add a result like below (please note that we must use 0 as the result set name when the result set type is Full result set):
Drag a Foreach Loop Container connects to the Execute SQL Task.
Double-click the Foreach Loop Container to open the Foreach Loop Editor, in the Collection tab, change the Enumerator to Foreach ADO Enumerator, then select User:result as ADO object source variable.
Click the Variable Mappings pane, add two Variables as below:
Drag a Script Task within the Foreach Loop Container.
The C# code that can be used only in SSIS 2008 and above in Script Task as below:
public void Main()
   // TODO: Add your code here
            Variables varCollection = null;
            string message = string.Empty;
            Dts.VariableDispenser.LockForWrite("User::Message");
            Dts.VariableDispenser.LockForWrite("User::Category");
            Dts.VariableDispenser.LockForWrite("User::CntRecords");
            Dts.VariableDispenser.GetVariables(ref varCollection);
            //Format the query result with tab delimiters
            message = string.Format("{0}\t{1}\n",
                                        varCollection["User::Category"].Value,
                                        varCollection["User::CntRecords"].Value
           varCollection["User::Message"].Value = varCollection["User::Message"].Value + message;
           Dts.TaskResult = (int)ScriptResults.Success;
The VB code that can be used only in SSIS 2005 and above in Script Task as below, please note that in SSIS 2005, we should
change PrecompileScriptIntoBinaryCode property to False and Run64BitRuntime property to False
Public Sub Main()
        ' Add your code here
        Dim varCollection As Variables = Nothing
        Dim message As String = String.Empty
        Dts.VariableDispenser.LockForWrite("User::Message")
        Dts.VariableDispenser.LockForWrite("User::Category")
        Dts.VariableDispenser.LockForWrite("User::CntRecords")
        Dts.VariableDispenser.GetVariables(varCollection)
        'Format the query result with tab delimiters
        message = String.Format("{0}" & vbTab & "{1}" & vbLf, varCollection("User::Category").Value, varCollection("User::CntRecords").Value)
        varCollection("User::Message").Value = DirectCast(varCollection("User::Message").Value,String) + message
        Dts.TaskResult = ScriptResults.Success
End Sub
Drag Send Mail Task to Control Flow pane and connect it to Foreach Loop Container.
Double-click the Send Mail Task to specify the appropriate settings, then in the Expressions tab, use the Message variable as the MessageSource Property as below:
The final design surface like below:
References:
Result Sets in the Execute SQL Task
Applies to:
Integration Services 2005
Integration Services 2008
Integration Services 2008 R2
Integration Services 2012
Integration Services 2014
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Thanks,
Is this a supported scenario, or does it use unsupported features?
For example, can we call exec [ReportServer].dbo.AddEvent @EventType='TimedSubscription', @EventData='b64ce7ec-d598-45cd-bbc2-ea202e0c129d'
in a supported way?
Thanks! Josh

How can I print only the attachment without the email content

How can I print only the attachment without the email content. Every time I send to print, It prints the email itself with the attachment- can I cancel that?

Hello Riklama,
When you first open the attachment (e.g. on your phone) than you can mail only that attachment. Works fine with my husbands blackberry.
Elsy

My husband has retrieved emails from my exchange email account. I deleted them from the trash bin. How is he doing this?

My husband has retrieved emails from my exchange email account. I deleted them from the trash bin. How is he doing this?

shannon284 wrote:
My husband has retrieved emails from my exchange email account. I deleted them from the trash bin. How is he doing this?
OK, let's come back to the original issue; how are deleted messages retrievable?
First, is the account set up as an Exchange account or a POP account? I'll assume it's Exchange. If it were POP the answer is obvious.
If it's an Exchange account are you deleting the messages from the phone or from some other computer? If you are deleting them from another computer they will not be removed from the Trash folder on the phone until the phone next syncs AND the Trash folder is opened. But this will take time. You can force the Trash folder to sync in near real time by going into Settings/Mail,Contacts,Calendars, tap on the Exchange account, tap on Mail Folders to Push and check "Deleted Items". Note that doing this will result in increased data usage and reduced battery life.
If I haven't described the situation tell me what assumptions I made that are incorrect.

SRM 7 - How to make a custom field dynamically retrieved trigger a refresh?

Hi all,
we're working on a brand new installation of SRM 7.
For contracts and purchase order, we created an enhancement on the webdynpro that manages header document data; in such view, custom fields are obtained dynamically and populate a Transparent container; by code, some tray group visually all the custom fields related to a specific section.
Now, the task is quite general; some of these "dynamically retrieved" fields should refresh, when populated, the view.
That is to say, in our context, that some custom field should automatically trigger the WDDOMODIFYVIEW method (which has been extended via overriding with an enhancement) when a value is inserted.
This would be a simple task if the field is explictly visible in the layout screen, since I could easily associate an event to the field itself.
But, since these custom field are automatically extracted in the WDDOMODIFYVIEW method, we don't know how to manage these field's behavior, e.g. after an input value has been inserted.
Each dynamic custom field is a type ref to cl_wd_uielement; we wonder if we have a way to associate an event (e.g., onEnter) to such an element.
Thanks in advance for any suggestion or help you will give us
EDIT: I guess this could not be the best section for such a kind of question ... I'd gently ask moderators eventually to move the thread to the Webdynpro section, if necessary. Thanks in advance.
Edited by: Matteo Montalto on Oct 7, 2010 6:01 PM

Closed. I opened a thread on this topic in a more convenient section of SDN forums (Specifically, web dynpro abap). Thanks anyway:)

Can't locate email content? All of a sudden my email content has disappeared from inside MacMail? The actual emails are coming through but I am unable to view them as the area is just left blank! Nothing has been done to have changed this?

Can't locate email content? All of a sudden my email content has disappeared from inside MacMail? The actual emails are coming through but I am unable to view them in the content area! Nothing has been done to have changed this?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Changing the EMail content for a message either failure or success

Hi All,
I need some information about how to change the Email content which was sent by the system which was triggered during process chain. we want to get the subject of the message rather than all the details which are part of default messages like
Log for This Process:
Log of Respective Background Job:
and others.
Since we are trying to send the message to Cell Phones , just need a short message either sucess or failure.
Is there any exit or methid to override this message to a custom message.
Any help in this regard is appriciated.
Thanks on advance.
sree

Hi,
I know its a very old post, but I'm facing this issue now.. It would be great if you guide me.
I'm getting the following error
"Message handle error.
error while attempting to process the message "com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessage"; the reported exception is: Transaction Rolledback.: weblogic.transaction.internal.TimedOutException: Transaction timed out after 303 seconds
BEA1-01502373650AE964512F
Thanks,
Girish.

Changing the email Content for the Contact Person Creation

Dear All
We are on SRM 7.0. We need to change he mail content that goes to the Contact Persons of Vendors. These contact Persons are created in SRM for bidding.
How to change the email content?.
Thanks in Advance.
velu

Hi,
Pl. follow the following steps :-
1. Create smartforms containing your own content to be sent to contact persons.
2. Implement the BADI : BBP_OUTPUT_CHANGE_SF.
3. There is one interface(method) in the above BADI e.g. :change_forms. You have to call smart forms in this interface.
I hope you may achieve your task by following the above steps.
regards
HARSHB

How do you get your email content to display? Mine shows in preview but not when I open the email, How do you get your email content to display? Mine shows in preview but not when I open the email

How do you get your email content to display? Yesterday, I suddenly could only see the content in preview.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode

Email content won't display in Mail Yosemite

Hi there,
I upgraded to Yosemite last week and until yesterday everything seemed to work fine. As of yesterday, my email contents stopped displaying in the content window. The only thing that changed before it started was that I used an external display. My mac is a MBP 13" mid 2012, 2.9 Ghz i7.
see screen capture attached.
I appreciate your help,
Ben.

Thanks for your quick answer,
And sorry, I should have said that before:
It started on the external display and actually the very first time I could still see the message content, it went blank only when I clicked on the "see more from..." hyperlink to unravel the message's full content. Then it started happening to the message as a whole and just by selecting a message to view it. Also, it happens on both the external and laptop displays, on the laptop display both when external display is connected or not, after successive restarts and shutdowns.
I hope this gives you a better idea, but do get back to me if you need more inf.
Thanks again,
Ben.

Ipad will not display email content

ipad will not display email content just 2 lines

Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Or ... Quit the mail app completely and relaunch mai. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Launch the mail app.

Dynamically retrieving email content

Similar Messages

Maybe you are looking for