DynDNS or No-IP service with Server?

I just received my Mac mini Snow Leopard Server and I am contemplating also being able to access the server from outside the house as well as from inside.
If I use No-IP or DynDNS service, will this work?
Or should I purchase a static IP address from my ISP? What happens when I change the ISP?
How does DynDNS compare to No-IP (I have experience with the latter but only with an iMac in a non-server environment). It worked fine for me (that was the free version of No-IP). This time I would like to know how it works with the Snow Server...
Thanks much,
Kenneth

Camelot,
Thanks for the much needed education! I completely understand the reverse lookup business ... but as I had said, and with reference to mail only, this shortcoming could be overcome by the other services that DynDNS provides such as MailHop (or the No-IP service at the link I mentioned above). So that will effectively solve that problem.
My next question then is, would I then have to address this reverse DNS lookup issues for each of the other services that Mac OS X SL provides, on an individual basis? What if I am running an iCal server and someone needs to connect from the outside? (I don't know at which address on the server the iCal service would be available, have never done it before).
You also mention " ... Mail relaying through some other mail server can help, but you'll need to determine how much, if any, the lack of reverse DNS matters to you. "
A. How do I determine as to how much, if any, the lack of reverse DNS matters to me? Let's say in my case, that the mail issue has been addressed by MailHop, beyond that and am repeating the question I had posed earlier *"The question in brief is, is there ANY feature, advantage or merit of a traditional static IP address from my ISP that a third party Dynamic DNS service can't match either directly with a single service or with add on services?, when one considers the cost issue, is it worth or is there any advantage of going for a static IP instead of a much more economical dynamic dns service?"*
Again, thanks for taking the time to educate me! really appreciate it and thanks for putting up with my ignorant questions :o) It's a genuine desire to learn!
Kenneth

Similar Messages

Outlook 2007 on terminal services with server 2008 repeatedly crashes

I updated my clients server 2008 to SP2 from SP1 and it kills Outlook. I previously (a month ago) did a complete uninstall of SP2 along with all updates that were installed that day, re-installed Office 2007 Standard and it worked just fine.
I have turned off DEP, ran some registry items that ive found online and spent hours on this! The server is working great as SP2 fixed a lot of "weird" issues. BUT Outlook and ONLY Outlook is crashing whenever you start the program. It
will not even let me try and start a new message, reply, etc. It stops at send/receive and usually at 66%
any help would be wonderful!

Hi,
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Thanks,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Implementing SQL Server Reporting Services with a Java EE Application

Hi All,
I need to find some tutorial on
"Implementing SQL Server Reporting Services with a Java EE Application"
for my j2EE application.
Until now i have searched a lot of sites but have not any thing related to this topic.
I am using apache axis along with SQL Server Report Manager for creating the sql server reports.
I have done upto :
Creating the webservice with the help of report manager.
Now i want to connect it through my j2EE application and want to retrieve some data from that web service.
I have got stuck on the following BOLD lines in my code .
code:
public CatalogItem[] getData(String res, String searchStr) throws RemoteException     {
              ReportingService2005Soap port = null;
              ReportingService2005Locator loc = new ReportingService2005Locator();
              // Retrieve a port from the service locator
              try {
                   port = loc.getReportingService2005Soap(new java.net.URL(res));
              } catch (MalformedURLException e) {
                   // TODO Auto-generated catch block
                   e.printStackTrace();
              } catch (ServiceException e) {
                   // TODO Auto-generated catch block
                   e.printStackTrace();
              org.apache.axis.client.Stub stub = (org.apache.axis.client.Stub) port;
              stub.setUsername("localhost\\Administrator");
              stub.setPassword("servWIN@2007");
              // Retrieve a port from the service locator
              SearchCondition condition = new SearchCondition();
              condition.setCondition(ConditionEnum.Contains);
              condition.setName("Name");
              if (searchStr != null)
              condition.setValue(searchStr);
              else
              condition.setValue("");
    //           Create an array of SearchConditions which will contain our single search condition
              SearchCondition[] conditions;
              conditions = new SearchCondition[1];
              conditions[0] = condition;
    //           Call the Web service with the appropriate CatalogItem[] returnedItems;
              CatalogItem[] returnedItems = null;
              port.findItems("foldername",BooleanOperatorEnum.Or, conditions);
              return returnedItems;
         }i.e. while executing the findItems() method i got the following exception :
System.Web.Services.Protocols.SoapException: The item '/reportingservices' cannot be found. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ItemNotFoundException: The item '/reportingservices' cannot be found.
at Microsoft.ReportingServices.Library.RSService.FindItems(String folder, String operation, SearchCondition[] properties)
at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.FindItems(String Folder, BooleanOperatorEnum BooleanOperator, SearchCondition[] Conditions, CatalogItem[]& Items)
Any any body has any idea please help me.
I need it urgently.
Regards.

The above example is mentioned in msdn virtual lab that teaches how to connect to reporting services from a j2ee application.
I have done the same thing .. but i am not able to render the report programmatically .. if anybody knows pls let me know the solution.

Use parameters in SQL Server reporting services with sharepoint lists

I want to make report from sharepoint 2010 list and forms library in sql server reporting services.
but also want to apply parameters.
I tried but parameters but it is not working.
How I can apply sharepoint lists parameters in sql server reporting services ?
How to run or view report of sharepoint lists or form library in sqlserver reporting services with required parameters?

Hi John,
When we use SharePoint list as datasource in SSRS it has two method to add parameter. Suppose we have a dataset (DataSet1) get data from SharePoint list. Please refer to the methods below.
Method 1: We can add parameter in the Query Designer dialog box to add parameter.
Click “Add Filter” icon in the “Applied filters” dialog box in Query Designer.
Select the corresponding field (Title), fill with specific conditions, and select Parameter option in the end of the row.
Create a dataset (DataSet2) fill with Title field.
Double click the parameter we create above, set the available values from DataSet2 field Title.
(Note: In the situation, we are get the single-value parameter.)
Method 2: It is a general method to add parameter in SSRS report.
Create another dataset (DataSet2) in the report fill with Title field.
Add a parameter (Title) get available values from DataSet2 Title field.
Add filter in the DataSet1.
(Note: This method, we can configure multi-values parameter.)
Reference:
http://technet.microsoft.com/en-us/library/aa337432(v=sql.105).aspx
If you have any questions, please feel free to let me know.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Troble configuring Hyperion Shared Services with SQL Server 2005

I recently installed SQL server (SQL SERVER 2005) in my machine and then am trying to install Hyperion (9.3.1) products. I started with Shared services. It was installed successfully. Problem is occuring when am trying to configure Shared service with SQL database using Hyperion Configuration utility (9.3.1)
The error which is popping up is
Unable to connect to the database for the product Hyperion Shared Services.
Things which I tried from my end
1. Made sure TCP IP Protocol was enabled in SQL server configuration server.
2. hypuser was created in SQl server.
3. hypdb was created in SQL server.
4. Was having dynamic IP address so install Loopback adapter to obtain Static IP address and port.
5. Port and IP address was correct.
Let me know where I am going wrong.
Any help will be greatly appreciated.

Finally got it fixed firewall settings needed to be change : This document helped me a lot to troubleshoot the issue
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2)
This problem may occur when SQL Server 2005 is not configured to accept incoming local and remote connections, which is disabled by default in SQL Server 2005 Express Edition, SQL Server 2005 Developer Edition and also SQL Server 2005 Enterprise Edition. To solve the connection forbidden problem, SQL Server 2005 needs to configure to allow incoming local and remote connections.
Firstly, ensure that SQL Server 2005 is configured properly to allow incoming connections on the instance of database server, else enable and turn on the local and remote connections setting.
Click Start button, then go to Programs or All Programs, then select Microsoft SQL Server 2005, followed by Configuration Tools. Click and run the SQL Server Surface Area Configuration.
On the “SQL Server 2005 Surface Area Configuration” page, click Surface Area Configuration for Services and Connections.
On the “Surface Area Configuration for Services and Connections” page, expand Database Engine tree, click Remote Connections.
Select Local and remote connections, or Local connections only which applicable only if there is no remote system tries to connect to the SQL Server, useful when you just trying to connect and authenticate with the server after installing.
Select the appropriate protocol to enable to local and/or remote connections environment. To ensure maximum compatibility, select Using both TCP/IP and named pipes.
Click Apply button when done.
Click OK button when prompted with the message saying that “Changes to Connection Settings will not take effect until you restart the Database Engine service.”
On the “Surface Area Configuration for Services and Connections” page, expand Database Engine, then click Service.
Click Stop button to stop the SQL Server service.
Wait until the MSSQLSERVER service stops, and then click Start button to restart the MSSQLSERVER service.
Secondly, SQL Server Browser service has to be enabled to allow for local and remote connections if SQL Server 2005 is running by using an instance name and users are not using a specific TCP/IP port number in the connection string.
Click Start button, then go to Programs or All Programs, then select Microsoft SQL Server 2005, followed by Configuration Tools. Click and run the SQL Server Surface Area Configuration.
On the “SQL Server 2005 Surface Area Configuration” page, click Surface Area Configuration for Services and Connections.
On the “Surface Area Configuration for Services and Connections” page, click SQL Server Browser.
Select Automatic as the Startup type to start SQL Server Browser service automatically every time system starts.
Click Apply button.
Click on Start button to start the service immediately.
Click OK button.
Finally, if remote computer needs to connect and access SQL Server, an exceptions in Windows Firewall included in Windows XP SP2 (Service Pack 2), Windows Server 2003 and Windows Vista needs to be created. If you’re using third-party firewall system, the exception rules also needed to be created to allow external remote connections to the SQL Server 2005 and SQL Server Browser Service to communicate through the firewall, else connections will be blocked. Consult the firewall manual for more details. Each instance of SQL Server 2005 must have its own exception, together with an exclusion for SQL Server Browser service.
SQL Server 2005 uses an instance ID as part of the path when you install its program files. To create an exception for each instance of SQL Server, you must identify the correct instance ID. To obtain an instance ID, follow these steps:
Click Start button, then go to Programs or All Programs, then select Microsoft SQL Server 2005, followed by Configuration Tools. Click and run the SQL Server Configuration Manager.
In “SQL Server Configuration Manager”, click the SQL Server Browser service in the right pane, right-click the instance name in the main window, and then click Properties.
On the “SQL Server Browser Properties” page, click the Advanced tab, locate the instance ID in the property list.
Click OK button.
Then create an exception for SQL Server 2005 in Windows Firewall.
Click on Start button, the click on Run and type firewall.cpl, and then click OK. For Windows Vista, type firewall.cpl in Start Search box and press Enter key, then click on Allow a program through Windows Firewall link on left tasks pane.
In “Windows Firewall”, click the Exceptions tab, and then click Add Program.
In the “Add a Program” window, click Browse button.
Click the C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Binn\sqlservr.exe executable program, click Open button. MSSQL.1 with is a placeholder for the instance ID that is obtained from previous procedure. Note that the path may be different depending on where SQL Server 2005 is installed.
Click OK button.
Repeat steps 1 through 5 for each instance of SQL Server 2005 that needs an exception.
For SQL Server Browser service, locate the C:\Program Files\Microsoft SQL Server\90\Shared\sqlbrowser.exe executable program, and click Open button.
Click OK button.

Integrating Microsoft Reporting Service with SAP running on SQL Server 2K5

Hi All,
I am new to SAP R3 and I need the help for Integrating Microsoft Business Intelligence Report Services with SAP R3 4.6 C running on SQL Server 2005? Also how Biztalk Adapter is use full for this process?
Thanks in Advance

Hello Madhav,
you might want to post this to the "SAP on Windows" forum as well.
Regards,
Marc
SAP Techology RIG

Strange error protecting BPEL service with WSM server agent

I'm trying to protect a BPEL service with OWSM (SOA Suite 10.1.3.3 MLR#19). Everything looks fine as far as I can see, but when the service is called with WSM active it always fails with internal server error. There are no errors in the logs (BPEL logs, OPMN logs, OWSM logs, ...) except the following in the Apache access logs:
"POST /policymanager/services/RegistrationService HTTP/1.0" 200 525
I can connect to /policymanager/services/RegistrationService with a browser, it shows a message saying it is an Axis web service. Without WSM the BPEL service works fine.
I have tried to fix this for two full days now and nothing I have tried makes a difference. Any suggestions for what I should do in order to solve the issue or at least get more data on what the root cause could be?
-Erik
Edit: There were two issues. The built-in test page doesn't work, when invoked with a real external client it works better. In addition the properties for file-based policies seem to be used even when the online check has been enabled (so they cannot be omitted/blank) and a restart is required to make the changes bite.
Edited by: ew on Oct 4, 2010 2:50 PM

Did you resolve this issue ? We are having same issue with one of our BPEL process ........ any help would be highly appreciated .....
Thanks in Advance

Possible to write non HTTP WEB services with an Application Server?

Is it possible to write services with the backend of an application server in JavaEE 5? Like a server listening for mails? Where does one find information about that? Books only discuss web (html/http) services that you can build in an AS...

Hi Dugu,
Can you give the link to the specific article and the version of JDeveloper you are using to help you further?
One thing to keep in mind is that the accessors must be public - using package access (no modifier) is not going to work.
Hope this helps,
Eric

Installing Forms&Report Services with Oracle Application Server 10g Rel 3

Can I Install Forms & Report Services with Oracle Application Server 10g Release 3 some how?
I am thinking of installing Forms & Reports Services in separate home with Oracle Application Server 10g Rel 3.
Does any body has any different idea so that they both can run more smoothly together.
Thanks
Raj
www.oraclebrains.com

They WILL NOT RUN TOGETHER. We have discussed this many times before. They must be in separate homes.
Check the search function for this forum to find the previous discussions.

Lost connection with server

For about two days now, the bbm application has refused to launch. It has been writing lost connection with server....can any one please help! It's really urgent

Hi and Welcome to the Community!
With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (step should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive
2) Reboot
Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. IF this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should contact your mobile service provider for formal support.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Issue with OSI PI WCF Web Service with wshttpbinding

Hi Experts,
System Details:
SAP MII 14 SP4
OSI PI Web Service: PITimeSeries
I am having issue when trying to call OSI PI web service using http post. it is returning status 0 when i am using exception handler in BLS.
Same web service works fine with basichttpbinding (SOAP 1.1) but with wshttpbinding (SOAP 1.2) it is giving error.
Following are Web config binding details for web service.
      <wsHttpBinding>
        <binding name="wsBinding_2011" sendTimeout="00:01:00" receiveTimeout="00:10:00" bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="true" allowCookies="false">
          <reliableSession ordered="true" inactivityTimeout="00:10:00" enabled="false" />
          <security mode="Message">
            <message clientCredentialType="Windows" negotiateServiceCredential="true" algorithmSuite="Default" establishSecurityContext="true" />
          </security>
        </binding>
      </wsHttpBinding>
I am not sure it could be the issue with passing windows credentials.
Did anybody consumed WCF web service with wshttpbinding with security mode as Message and clientCredentialType as Windows.
Also i was trying to pass MYSAPSSO2 SSO token to service in http post but first i am not sure if this is correct windows token and second which header property of service should be mapped and i am not sure that I am going into correct direction or not.
Please let me know what i am missing.
I have tried following other options and tools:
SOAP UI: basichttpbinding works fine for wshttpbinding receiving Internal Server error in log and Response as
                  The security context token is expired or is not valid.
MII Web Service Action Block: basichttpbinding works fine for wshttpbinding not able to configure url through wizard because as per                                                                              my discussion with other MII experts MII does not support SOAP1.2. that is one reason for using http post.
WCF Storm: both bindings works fine (There is option to select windows authentication and Impersonation level as delegation)
WCF Test Client: Both bindings works fine
Any help is appreciated.
Thanks & Regards,
Manoj Bilthare

Hi Sam,
The web service is valid following are details of testing on various tools.
SOAP UI: basichttpbinding works fine for wshttpbinding receiving Internal Server error in log and Response as The security context token is expired or is not valid.
MII Web Service Action Block: basichttpbinding works fine for wshttpbinding not able to configure url through wizard because as per my discussion with other MII experts MII does not support SOAP1.2. that is one reason for using http post.
WCF Storm: both bindings works fine (There is option to select windows authentication and Impersonation level as delegation)
WCF Test Client: Both bindings works fine
Please let me know if additional details required.
Thanks & Regards,
Manoj Bilthare

Calling Web Service with SOAP header from BPEL

Hi,
I am calling a web service (with header information) from BPEL. In the Invoke activity, i created a header variable to pass the header information.
But, when i test the BPEL service, invoke activity fails because the header information is not being passed.
Below is the error message (copied from clipboard).
+<messages><input><Invoke_1_getsubinfo_InputVariable><part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="parameters"><getsubinfoElement xmlns="http://ws/its/tabs/webservices/SingleRowWS/SingleRowWS.wsdl">+
+<pSubnoin>+
+<insubno>12345678</insubno>+
+</pSubnoin>+
+</getsubinfoElement>+
+</part></Invoke_1_getsubinfo_InputVariable></input><fault><bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>exception on JaxRpc invoke:+
start fault message:+
Internal Server Error (Caught exception while handling request: javax.xml.rpc.JAXRPCException: Not authenticated user)+
*:end fault message*</summary>
+</part></bindingFault></fault></messages>+
As said, no header information is visible in the Invoke activity.
Please provide help for the above issue.
-MJ

Hello Patrick,
Thanks for the response. I am using normal assign activity to assign values to the header variable as shown below. HeadMT is the header variable which is passed in the invoke activity.
+<assign name="Assign_Header">+
+<copy>+
+<from expression="'tkl12'"/>+
+<to query="/ns1:LOGIN_INFO/ns1:USER_NAME" variable="*HeadMT*"+
part="payload"/>
+</copy>+
+<copy>+
+<from expression="'tkl123'"/>+
+<to query="/ns1:LOGIN_INFO/ns1:PASSWORD" variable="*HeadMT*"+
part="payload"/>
+</copy>+
+<copy>+
+<from expression="'TKL'"/>+
+<to query="/ns1:LOGIN_INFO/ns1:CHANNEL_ID" variable="*HeadMT*"+
part="payload"/>
+</copy>+
+</assign>+
The expected input by the web service is as below with the header information highlighted.
+<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="http://ws/webservices/RowWS/RowWS.wsdl">+
+*<soap:Header>*+
+*<ns1:LOGIN_INFO>*+
+*<ns1:USERNAME>tkl12</ns1:USERNAME>*+
+*<ns1:PASSWORD>tkl123</ns1:PASSWORD>*+
+*<ns1:CHANNEL_ID>TKL</ns1:CHANNEL_ID>*+
+*</ns1:LOGIN_INFO>*+
+*</soap:Header>*+
+<soap:Body>+
+<ns1:substatusElement>+
+<ns1:pInparam>+
+<ns1:insubno>7674988</ns1:insubno>+
+</ns1:pInparam>+
+</ns1:substatusElement>+
+</soap:Body>+
+</soap:Envelope>+

SQL Server 2012 DB Engine does not start (clean install with server 2012 and 2008 R2)

I'm trying to do clean installation of SQL server 2012 on Server 2012 (which is runnning as a VM on ESX server) and getting this "wait on the DB engine recovery failed" message. Initially, I though this issue was related to some permission issues
but changing the permission or service accounts didn't help. I'm not seeing any "denied" messages in the log files either. Even with Server 2008 R2 (clean built VM), the installation gives the exactly the same error messages.
My setup is purely for test purpose; so, the security is not a concern. Can someone help or give me a clue where to look?
(Summary)
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2014-05-28 17:12:12
End time: 2014-05-28 17:19:47
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: WIN-1V3VKPV5Q19
Machine processor count: 1
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
Installation location: E:\x64\setup\
Installation edition: Evaluation
Slipstream: True
SP Level 1
Patch Level: 11.1.3128.0
Product Update Status:
Success: KB 2674319, KB 2793634
Product Updates Selected for Installation:
Title: Service Pack 1
Knowledge Based Article: KB 2674319
Version: 11.1.3000.0
Architecture: x64
Language: 1033
Title: SQL Server 2012 SP1 GDR Product Update
Knowledge Based Article: KB 2793634
Version: 11.1.3128.0
Architecture: x64
Language: All
Update Source: MU
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLAgent$TESTDB
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Automatic
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140528_170909\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: TESTDB
INSTANCENAME: TESTDB
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$TESTDB
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: WIN-1V3VKPV5Q19\Administrator
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 1
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140528_170909\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Browser
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140528_170909\SystemConfigurationCheck_Report.htm
(Error Log)
2014-05-28 17:17:26.64 spid8s 0 transactions rolled back in database 'msdb' (4:0). This is an informational message only. No user action is required.
2014-05-28 17:17:26.73 spid9s Starting up database 'model'.
2014-05-28 17:17:28.24 spid9s Error: 9004, Severity: 23, State: 6.
2014-05-28 17:17:28.24 spid9s An error occurred while processing the log for database 'model'. If possible, restore from backup. If a backup is not available, it might be necessary to rebuild the log.
2014-05-28 17:17:28.24 spid9s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
(Details)
(01) 2014-05-28 17:17:28 Slp: Exception type: Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineConfigException
(01) 2014-05-28 17:17:28 Slp: Message:
(01) 2014-05-28 17:17:28 Slp: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
(01) 2014-05-28 17:17:28 Slp: HResult : 0x851a001a
(01) 2014-05-28 17:17:28 Slp: FacilityCode : 1306 (51a)
(01) 2014-05-28 17:17:28 Slp: ErrorCode : 26 (001a)
(01) 2014-05-28 17:17:28 Slp: Data:
(01) 2014-05-28 17:17:28 Slp: SQL.Setup.FailureCategory = ConfigurationFailure
(01) 2014-05-28 17:17:28 Slp: WatsonConfigActionData = INSTALL@CONFIGRC@SQL_ENGINE_CORE_INST
(01) 2014-05-28 17:17:28 Slp: WatsonExceptionFeatureIdsActionData = System.String[]
(01) 2014-05-28 17:17:28 Slp: Stack:
(01) 2014-05-28 17:17:28 Slp: at Microsoft.SqlServer.Configuration.SqlEngine.SqlServerServiceBase.WaitSqlServerStart(Process processSql)
(01) 2014-05-28 17:17:28 Slp: at Microsoft.SqlServer.Configuration.SqlEngine.SqlServerServiceSCM.StartSqlServer(String[] parameters)
(01) 2014-05-28 17:17:28 Slp: at Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineDBStartConfig.ConfigSQLServerSystemDatabases(EffectiveProperties properties, Boolean isConfiguringTemplateDBs, Boolean useInstallInputs)
(01) 2014-05-28 17:17:28 Slp: at Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineDBStartConfig.DoCommonDBStartConfig(ConfigActionTiming timing)
(01) 2014-05-28 17:17:28 Slp: at Microsoft.SqlServer.Configuration.SqlConfigBase.SlpConfigAction.ExecuteAction(String actionId)
(01) 2014-05-28 17:17:28 Slp: at Microsoft.SqlServer.Configuration.SqlConfigBase.SlpConfigAction.Execute(String actionId, TextWriter errorStream)
(01) 2014-05-28 17:17:28 Slp: Watson Bucket 1
Original Parameter Values
(01) 2014-05-28 17:17:28 Slp: Parameter 0 : SQL Server 2012@RTM@
(01) 2014-05-28 17:17:28 Slp: Parameter 1 : Microsoft.SqlServer.Configuration.SqlEngine.SqlServerServiceBase.WaitSqlServerStart
(01) 2014-05-28 17:17:28 Slp: Parameter 2 : Microsoft.SqlServer.Configuration.SqlEngine.SqlServerServiceBase.WaitSqlServerStart
(01) 2014-05-28 17:17:28 Slp: Parameter 3 : Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineConfigException@1306@26
(01) 2014-05-28 17:17:28 Slp: Parameter 4 : Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineConfigException@1306@26
(01) 2014-05-28 17:17:28 Slp: Parameter 5 : SqlEngineDBStartConfigAction_install_configrc
(01) 2014-05-28 17:17:28 Slp: Parameter 6 : INSTALL@CONFIGRC@SQL_ENGINE_CORE_INST
(01) 2014-05-28 17:17:28 Slp:
Final Parameter Values
(01) 2014-05-28 17:17:28 Slp: Parameter 0 : SQL Server 2012@RTM@
(01) 2014-05-28 17:17:28 Slp: Parameter 1 : 0xD15B4EB2
(01) 2014-05-28 17:17:28 Slp: Parameter 2 : 0xD15B4EB2
(01) 2014-05-28 17:17:28 Slp: Parameter 3 : 0x4BDAF9BA@1306@26
(01) 2014-05-28 17:17:28 Slp: Parameter 4 : 0x4BDAF9BA@1306@26
(01) 2014-05-28 17:17:28 Slp: Parameter 5 : SqlEngineDBStartConfigAction_install_configrc
(01) 2014-05-28 17:17:28 Slp: Parameter 6 : 0x9C5770A6

Hi Nababoya:
As you are telling this is a test installation process...
In the logs i m seeing the error message "An error occurred while processing the log for database 'model'. If possible, restore from backup. If a backup is not available, it might be necessary to rebuild the log.".
1) If the SQL Services was installed successfully and SQL Service was not able to start because of model database issue...
    1.1) If you have model database SQL back file, start the SQL Server in single user mode with minimum configuration and try to restore MODEL database
http://blogs.msdn.com/b/sqlserverfaq/archive/2011/05/11/inf-hey-my-sql-server-service-is-not-starting-what-do-i-do.aspx
    1.2) If you don't have backups., try to rebuild the system databases but make sure that you are not losing any data critical data on master and SQL Jobs on MSDB
http://msdn.microsoft.com/en-us/library/dd207003%28v=sql.110%29.aspx#RebuildProcedure
2) As if this is a new installation try to repair the instance with the help of setup media file
3) If the repair option fails., the last option wipe out the complete SQL Server components from Services.msc and Registries and start new installation.
4) Make sure when you are doing un-installation all the required SQL Server components on services.msc should be in stop state.
Hope this helps and let me know any questions...
Thanks,
Thanks, Satish Kumar. Please mark as this post as answered if my anser helps you to resolves your issue :)

Creation of SharePoint Search service with the help of powershell.

Hi Team,
Upgraded WSS 3.0 to SharePoint 2013 Foundation red the SharePoint search.
We found log backup on the subjected server was failing due to database name,
which is more than max allowed legth. To fix the same, we may need to rename the
same to short name.
failed-1073548784)
Executing the query "BACKUP LOG [Search_Service_Application_AnalyticsRe..."
failed with the following error: "Invalid device name. The length of the
device name provided exceeds supported limit (maximum length is:259). Reissue
the BACKUP statement with a valid device name.
BACKUP LOG is terminating
abnormally."
Database Name :
Search_Service_Application_AnalyticsReportingStoreDB_2e7b13e23fde4c8397ed0be06474966f
To rename SharePoint Search it took more than 5 hours.
Is it possible to create SharePoint search using PowerShell and will get support from Microsoft for search application built this way ?
Please share information on how create SharePoint search using powershell.
Our environment: SharePoint 2013 Foundation.
Best Regards,
Mahesh

Hi Mahesh,
To create Search Service Application in SharePoint Foundation 2013 by using PowerShell, you can refer to the links below for more details:
http://www.andrewjbillings.com/sharepoint-2013-foundation-creating-the-search-service-with-powershell-and-removing-those-pesky-guids/
http://blog.falchionconsulting.com/index.php/2013/02/provisioning-search-on-sharepoint-2013-foundation-using-powershell/
Best regards,
Victoria Xia
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Issue with calling external web service with authentication details ...

Hi,
     I am facing a deployment issue with Oracle ESB. I am trying to call an external Web Service with authentication from ESB SOAP Service. It is working fine with my local ESB version 10.1.3.3.0 Build PCBPEL_10.1.3.3.0_GENERIC_070615.0525; however it is getting an error at our development ESB version 10.1.3.3.1 Build PCBPEL_10.1.3.3.1_GENERIC_RELEASE.
     I am getting following error.
An unhandled exception has been thrown in the ESB system. The exception reported is: "org.collaxa.thirdparty.apache.wsif.WSIFException: exception during SOAP invoke: Server was unable to process request. ---> Object reference not set to an instance of an object.; nested exception is: javax.xml.rpc.soap.SOAPFaultException: Server was unable to process request. ---> Object reference not set to an instance of an object. at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.populateFaultMessage(WSIFOperation_JaxRpc.java:3086) at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeOperation(WSIFOperation_JaxRpc.java:1728) at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeRequestResponseOperation(WSIFOperation_JaxRpc.java:1473) at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.executeRequestResponseOperation(WSIFOperation_JaxRpc.java:1196) at oracle.tip.esb.server.common.wsif.WSIFInvoker.executeOperation(WSIFInvoker.java:867) at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(WSIFInvoker.java:770) at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(WSIFInvoker.java:790) at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.nextService(OutboundAdapterService.java:208) at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.processBusinessEvent(OutboundAdapterService.java:127) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatchNonRoutingService(InitialEventDispatcher.java:118) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(InitialEventDispatcher.java:95) at oracle.tip.esb.server.dispatch.BusinessEvent.raise(BusinessEvent.java:1424) at oracle.tip.esb.utils.EventUtils.raiseBusinessEvent(EventUtils.java:112) at oracle.tip.esb.server.service.EsbRouterSubscription.onBusinessEvent(EsbRouterSubscription.java:307) at oracle.tip.esb.server.dispatch.EventDispatcher.executeSubscription(EventDispat
     Could one of you please help me out to understand why it is happining.
Thanks in advance.
Jyotirmoy.

Hi Mahesh,
One you are missing is authentication token or credentials.
Please refer to the following articles.
http://www.cleverworkarounds.com/2014/02/05/tips-for-using-spd-workflows-to-talk-to-3rd-party-web-services/
A Series of articles related to Web Service in SPD Workflow
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 1
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 2
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 3
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 4
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 5
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 6
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 7
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 8
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 9
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 10
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 11
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 12
Please don't forget to mark it answered, if your problem resolved or helpful

DynDNS or No-IP service with Server?

Similar Messages

Maybe you are looking for