E-mail and Internet Service stopped working and I cannot get it going again - Pearl 8130

I recently activated e-mail and a data package (December 12th to be exact). On Saturday I noticed that I stopped receiving e-mails from my Hotmail, and as of today I'm receiving any e-mails from my work e-mail either. It worked 100% normally up to this point.
My browswer or online applications are not working whatsoever either. It says "There is insufficient network coverage to process your request. Please try again later", which is garbage as I have just fine network coverage as I sit in my office.
Yesterday I received a message to my phone stating:
"Update the password for jsytsma@**************.on.ca in the BlackBerry Internet Service! E-mail messages from jsytsma@**************.on.ca are not being delivereed to your BlackBerry device. To resume receiving email messages from this address, update the password for jsytsma@**************.on.ca in the BlackBerry Internet Service:"
And it proceeds to tell me how to do this. It says I can do it through my phone, which is a dead end as I go to tweak it, and I get the message about "Insufficient network coverage". 
I then went to my Web Client login and tried what I thought to be my username and password. I tried several combinations and nothing was working. I have 2 passwords I use for things and I tried them over and over again with different user names, but I'm 95% sure my user name is "jsytsma". 
So last resort, I type in my pin and it said the username/password will be sent to my BlackBerry messenger. That would be great if everything were working! So far it's been over 2 hours and I've received nothing.
Is there a number I can call that DOESN'T cost me $55 CDN dollars a call?

Do that ^^ as stated.
or:
1. Options > Advanced > Host Routing Table > Menu > Register.
2. With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot
if still nothing...
3. resend your service books from your carrier BIS site.
http://www.blackberryfaq.com/index.php/Where_can_I_log_into_my_BIS_account%3F
or, for a call that doesn't cost you $55, call your carrier.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • My iMessage stopped working, how do you get it going again?

    iMessage stooped working (suddenly). Anybody else had this problem? How do you get it going again?

    I found and followed advice from "Ralph" about a similar problem.  His "Read This" connection was very helpful.  I followed the instructions for "Before Resetting the SMC" and when I finally rebooted my MacBook the camera worked with Photo Booth. So, I'm a happy camper.  [Thanks, Ralph.]

  • My (4G) iPod's screen adhesive came off, it's home botton is broken,  and it also stopped working I want to get it fixed how much would it cost to get it fixed?

    My (4G) iPod's screen adhesive came off, it's home botton is broken,  and it also stopped working I want to get it fixed how much would it cost to get it fixed?

    Apple at this time does not repair iPods, but assuming that that iPod is not in multiple pieces will replace the entire iPod for a flat fee; see the Repair Pricing section here:
    http://www.apple.com/support/ipod/service/faq/
    There are independent iPod repair services that may be able to perform a repair for less. Do a web search for "ipod repair". It is also possible to purchase parts and find instructions on doing a repair yourself, though it's not particularly easy. Note, though, that if you elect to have the iPod serviced by an unauthorized shop or perform a repair yourself, all further support from Apple will be void.
    Regards.
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base before you post a question.

  • Hello my iMessage and FaceTime just stopped working and now it is not verifying my apple id why is this?

    HEllo my iMessage and FaceTime suddenly stopped working and it won't let me verify my apple ID why is this?

    likely an Apple problem
    http://www.apple.com/support/systemstatus/

  • Hi yesterday I and my companion stopped working and function imessedge facetime?

    Hi yesterday I and my companion stopped working and function imessedge facetime?

    My wifi doesn't work too what happened?

  • My iphone's internet just stopped working and i can no longer use the personal hot spot though I still have internet ?

    I'm on 3 as pay as you go and bought an all in one 15 so i get unlimited data for 1 month, but for somereason my internet has stopped working asnd i still have 3 weeks left of data? My iphone no longer show the personal hot spot button too and when i select it from mobile data it is forever loading and does not work >

    Contact the carrier and ask them what is going on.

  • Had a Airport Express connected to my stereo and it was working.  I brought an Airport Extreme and suddenly it took over and Airport Express stopped working and disappeared from Airport Utility. What I am supposed to do?  ar2ro

    I have an Airport Express connected to my stereo and it was working without any problem.
    Recently I bought an Airport Extreme to use it as my Base Unit connecting it to my DSL.
    I followed the instructions of the Airport Utility, and it started working.
    Suddenly, problems started happen the Airport express that was connected to the stereo , stopped working and it disappeared from the Airport Utility area , as it did not exist in the network. I tried to reset it but it did not appear in the Airport Utility page.
    Apparently I have other problems with the private network that it created because I cannot use it because of problems with the password that was created.  I can only use the network that  I created for my guest...
    I dont know if my problem is a configuration problem or  there is problem with the equipment.
    I read that other users where having the same problem with the Airport express , using non apple equipment as their base unit , but I thought that using the Airport Extreme was going to be compatible and no problems would happen.
    What should I do?

    Common Problem. Common solution.
    Connect your Express via ethernet cable to the Mac while other network connections on the Mac are switched OFF.
    After the Express shows up, change the settings of the Express to join the existing network. Take the appr. settings.
    Unplug and reconnect your Mac to the network.
    Check if the Express shows up in Airport Utility
    Alternative solution:
    Hardreset the Express to factory settings
    (while on power push the Pin next to the audio plug with a paperclip. Plug out the Express still holding down the little button then replug the Express to power and release button)
    After that, the Express will show up in the Airport Utility.
    Make all needed settings.
    I would prefer the first solution, its easier just to plug a cat5 cable.

  • USB hub and internet sharing stop working after sleep

    Hi,
    I have a relatively new Bluestork USB hub I purchased to connect multiple USB devices I have at the same time. It used to work correctly under Leopard, but now it stops working each time the computer wakes up from sleep. I have to restart the computer for it to start working again. Both link and power LEDs stay on, even when the hub is not recognized.
    My second problem is related to internet sharing. It stops working after each sleep/wakeup cycle and the only way to make it work again is to restart the computer. It used to work correctly before Snow Leopard as well.
    I have all the Mac updates installed.

    Thanks Barry.
    The hub is on its way to the manufacturer for after sales service...
    But the issue with AirPort remains the same, even after resetting SMC.
    Some clarification:
    * It happens just after computer wakes up from sleep. Restarting solves the problem and the issue doesn't arise until computer goes standby again.
    * The whole WiFi card becomes unresponsive. It is not only the Turn Off button, but the whole functionality is stopped. The card can not be activated/deactivated and it doesn't connect to any network. If it is used for internet sharing, clients are unable to connect.

  • Email account and Internet service not working after migration onto a new (upgraded 3rd party) 2012 MBP. Hardware or software issue.

    I just purchased a refurb Mac Book Pro from the Apple on-line store. When I received the machine (serial number)  I purchased 3rd party (OWC) parts. All of these were installed by the authorized, local Apple repair store I have had excellant results with past issues with my 2006 MBP. The parts installed are: 16 meg ram, 240 SSD and a 1 T installed replacing the optical drive.
    Feeling ready now, I had the Apple store do the migration from my 2006 MacBook Pro (OS 10.6.8) over to the 2012.
    When trying to get the new machine into the production flow, I cannot get email to work. It will launch but I cannot access accounts.
    During the One to One, then moved over to the Genius Bar appointment, they reentered the account(s) data. Nothing.
    Also at this time they noticed that the Internet connection was not working.
    A new internet account was set up and it worked. They (Genius) launched email and the Internet connection crashed. This was repeated about 5 times.
    The computer was left with Apple to reinstall the OS (10.8) - their best suggestion as a fix and I have now had a call to say that the install did not correct the problem. Now they are questioning the install of the 3rd party parts as the possible problem.
    I'm to go back into the Apple store to discuss the next steps.
    I would really, really appreciate anyones thoughts / suggestions on this problem. Is it software or hardware? Should I re-install the original ram and 500 m hard drive to start over with the migration? I'll be honest here and state - I'm not a technician in computers or this side of technology. That is why I have reliable parties do the install and trouble shoot. Not a comfortable feeling being at their mercy.
    Advanced thanks to all who believe they have answers.

    Back from the Apple store with my 2012 MacBook Pro.
    After one re-install of the OS - no better - a clean install was performed - purging all of the data that they had migrated over from my 2006 MBP last week.
    The belief is, that the migrated data from my 2006 MBP was too great of a leap for the new 10.8. My (a lot) software was too dated and there in was a "blip" of some sort in some / one of the programs.
    So - all of the OWC parts and pieces that I had installed are not the issue - as they all show up on the About this Mac - and other things are functional. Yeah.
    I now have my 2012 back (with upgrades) in the original form (OS and programs) and I will start a one by one migration of programs that I do need and use. Being cautious not to make one large transfer.... weeding out programs that will no longer be needed or will work on the OS 10.8. I will manually set up the email accounts one by one.
    Fingers crossed.

  • HT2480 Ipad mini - exchange email stopped working randomly  Error: "Cannot get mail. The connection to the server failed."

    I got an iPad mini over Christmas and have had no issues setting up/managing my email until yesterday. I've had my Exchange email working for almost a month, and yesterday I stopped getting emails and getting the error: "Cannot Get Mail. The connection to the server failed."
    I tried resetting the device (multiple times) and deleting and recreating the Exchange account (multiple times). This is getting annoying because it worked fine up until yesterday. I'm not aware of any updates to the device, or any changes that have occurred since yesterday.

    Due to a screen issue, I had my iPhone 5 replaced two days ago. I repeated deleted the mail account and kept adding it but this did not make any difference. When I attempted to setup the new phone with my Google (Gmail via exchange active sync) accounts I was receiving this same "Cannot Get Mail" error. From what I was able to gather, this problem should be affecting Gmail accounts set up via Exchange. When originally purchasing the phone I was assisted and directed to set up my Gmail account through Exchange because it had the ability to use "ActiveSync" and push not only mail and calendars, but all of my contacts as well. I found this article regarding the subject.
    http://www.pcmag.com/article2/0,2817,2413283,00.asp
    What it came down to was having to delete my Gmail via Exchange account and separate it into two different accounts, a regular gmail account for my mail and a CardDAV account for my contacts.
    Here is what I did. Google is changing their system and for new registrars Exchange ActiveSync will not work so you will be unable to register your account via Exchange and have your mail, calenders, and contacts all pushed together. I find this change really annoying. If you are having problems accessing your contacts after deleting the mail account, like I was, here is the work around.
    To circumvent this issue go to Setting > Mail, Contacts, Calendars > Add Account > Other > Add CardDAV Account: Under server ender google.com, then your email user name and password, then click next to verify the information.
    I hope this helps.

  • [Solved] Moved from location and internet connection stopped working.

    Hello everyone, this is my first post in the forums and first time using arch so please bear with me. I recently bought an Asus UX51, formatted it and installed arch linux with the help of the beginner's guide. After overcoming several problems (preinstalled raid, nvidia optimus to name a few) I managed to get it running, installed a DE and was using wireless connection just fine with
    # ip link set wlp3s0 up
    # wifi-menu wlp3s0
    Everything was going fine until I came for a holyday's week to my parents house and tried to connect to their wireless network to no avail. I have WAP in my house, same do they in their house (in which I'm right now).
    I have been trying the past 2 days with netctl, and even the manual method described in the wiki , googled, etc. I'm already out of ideas so I decided it was time to ask for help. If it's of any use, wifi-menu scans the network properly, and # netctl status wlp3s0-interface_name returns this:
    Also read somewhere in the forums to try # journalctl -b , this is what I get on the last page:
    When I try #ping, I get the following after having to wait around 15 secs :
    ~$ ping google.com
    ping: unknown host google.com
    I even tried booting from an USB with an arch iso, just to try getting a wired connection, mount my arch installation and download some other network manager just to see if I got any luck, but not even that worked (in my house, just by connecting the cable before booting I would automatically have internet access when booting with the iso, but it didn't work here...).
    Any help would greatly be appreciated.
    Last edited by contiver (2013-08-01 18:06:48)

    I got it running !
    Just followed the manual guide once more, but managed to bypass some problem I had the first time I tried (you could say I was a bit lost by the command in the wiki but managed to understand it a bit more this time)
    I believe the setup my parents have here is pretty messed up, other people get similar problems from time to time with the network, but I don't really understand much to mess with it so I'd rather leave it like it is.
    In case it's of any use to anybody I'll leave here how everything was left in the end in my laptop.
    Used:
    wpa_passphrase foobarssid foobarpassword
    to generate:
    network={
    ssid="foobarssid"
    #psk="foobarspassword"
    psk=f5d1c49e15e679bebe385c37648d4141bc5c9297796a8a185d7bc5ac62f954e3
    I copy pasted that on my /etc/wpa_supplicant.conf ,which had a line at the start which seems was a leftover from the time I tried before (when I tried using wpa_supplicant it failed and complained about it in the error msg).
    After that I used
    wpa_supplicant -B -iwlp3s0 -c/etc/wpa_supplicant.conf
    After that I used
    dhcpcd -A wlp3s0
    That failed because it said that there already was a dhcpcd process running, I killed it, tried again and it all went fine. Tried ping and kept answering "unknown host". Tried rebooting and that's when # ping google.com  started to behave like it should. Tried browsing a bit and no problems whatsoever.
    Thanks a lot for the help!

  • Firefox keeps on crashing and nvidia drivers stops working and recovered does this have any problem with my cpu processor or hardware

    Problem Event Name: APPCRASH
    Application Name: plugin-container.exe
    Application Version: 35.0.1.5500
    Application Timestamp: 54c1f9f3
    Fault Module Name: mozalloc.dll
    Fault Module Version: 35.0.1.5500
    Fault Module Timestamp: 54c1f224
    Exception Code: 80000003
    Exception Offset: 00001425
    OS Version: 6.1.7600.2.0.0.256.48
    Locale ID: 16393
    Additional Information 1: 0a9e
    Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional Information 3: 0a9e
    Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
    Read our privacy statement online:
    http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
    C:\Windows\system32\en-US\erofflps.txt

    In the address bar, type '''about:crashes'''<enter>.''' Note:''' If any reports do not
    have '''BP''' in front of the numbers, click it and select '''Submit'''.
    Using your mouse, '''mark''' the most '''resent 7 - 10''' crash reports, and
    '''copy''' them. Now go to the reply box below and '''paste''' them in.

  • I purchased Adobe Photoshop Elements 11 and it was loaded onto my desktop Mac and my computer stopped working and the Geek Squad had to take everything off of my computer and reimage it. Well in the process I lost the program Adobe Photoshop 11 & Adobe Pr

    Hello could someone please pick  up the phone or help me on line?

    Try this --
    Go to the bottom of the link I gave you, and you will see
    click that link and then click the chat button to talk to an Adobe agent

  • My internet and bbm has stopped working !?

    hi my bbm and internet has stopped working since about 5 o`clock yesterday , when i click on the internet "error " and i can click on the bbm but the recent updates has gone and i will try and send a message and it has the red clock next to it.

    Are you receiving or able to send email?
    ashlee, Do a simple reboot on the BlackBerry in this manner: With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot. A reboot in this manner is prescribed for most glitches and operating system errors, and you will lose no data on the device doing this.
    After reboot give it a few minutes and see if your data starts working again.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • My phone stopped working and i can't turn it on. I want to know if it can be replaced for free because it's still in warranty!

    Hi, I was wondering what is the warranty policy. A year ago I was using Iphnone 4 s and the camera stopped working and the carier gave me a new.
    I couple of month ago I bought Iphone 5 and yesterday it just stopped working.
    My question is want ca I do now? Do I need to go in an Apple store or in the office of the mobile carier I'm using.
    Thank you

    Type the S/N here and see if it is indeed covered for you: https://getsupport.apple.com/ProductSelector.action  If yes, take it directly to Apple and avoid a runaround. If there's any issue with coverage or any other sh*t, take it to the carrier and let them deal with it, although it will probably take longer to sort out (but you may get lucky and be handed a refurbished unit right off the bat).
    If possible try connecting it to a computer running iTunes to see if it shows up. That way you can back it up and save its contents for restoring onto whatever new device you get.

Maybe you are looking for

  • Some one help me please for my curve 8320.

    hello, i bought this used blackberry recently and i have beed trying to setup an email, but i couldnot, when i m in the setup wizard, then in the email setup, it doesnot ask me if i can put my personal email like hotmail, rather it tells me if i have

  • Trouble connecting mbpro to dell monitor??

    i am conneting a macbook pro to a dell st2220l monitor with hmdmi to mini dvi cable. am having trouble getting full screen on the monitor?? am sure this is an easy one so appreciate the help!!!

  • Why is my itunes missing text? and how can I fix it?

    A couple of months ago I upgraded to Itunes 10.5 and ever since, I have had no text across the top (where it would usually say file, edit, view, ect.) and also when I plug in my iphone or ipad and click on them in order to sync or back them up, all o

  • How to mount a WiFi antenna on Qosmio x505?

    Anybody tried to mount an antenna on Qosmio x505? The signal strength is pretty low in my area.

  • Blank Solution Browser in SSMS 2012 SQL Script project

    I am creating a new SQL Script project on a fresh install of SQL 2012 Developer. I can create, save and then reopen the project using the sln or project file. However, the Solution Explorer Window is blank and there seems no way to add folders or fil