E-Mail Validation fails (email validation)
Hi,
according to the RFC, emails addresses in the following
format are allowed: [email protected]
but SPRY fails on validating this email address. Is there a
fix for that? And if not, which file would I have to update in
order to allow this email format?
Thanks!
Nils
Hi Nils,
You need to modify
http://labs.adobe.com/technologies/spry/widgets/textfieldvalidation/SpryValidationTextFiel d.js
Open that file and do a search for 'email', you should see a
regular expression after it that looks something like this:
var rx = /^[\w\.-]+@[\w\.-]+\.\w+$/i;
You'll probably want to add the + to it like this:
var rx = /^[\w\.-\+]+@[\w\.-]+\.\w+$/i;
I'll file a bug on our side to make sure we allow all chars
specified in the RFC.
--== Kin ==--
Similar Messages
-
WSDL Validation Failed (Web Services)
I want to create a Web Service-Based Application in LabVIEW and I'm
trying to go through the steps in the tutorial
http://zone.ni.com/devzone/cda/tut/p/id/4728.
I tried the following web services, but I always get the same error.
http://coeservice.en.kku.ac.th:8080/TemperatureConvertor/TemperatureConvertorService?WSDL
http://www.ecubicle.net/iptocountry.asmx?wsdl
Error:
WSDL Validation Failed.
Validation failed. The URL is not formatted correctly and should be in the folowing form: http://localhost/test/good.asmx?WSDL
I defined a proxy server with authentication. Without doing, that I get another error:
Validation Failed.
Possible Reasons are:
1. The URL does not exist or the WSDL is bad.
2. Authentication is not correct.
3. Proxy information is not correct.
So it seems that the proxy information is ok. But the web service I want to access isn't located on the localhost - I want to access a service in the internet. Can somebody give me a hint? I already tried to change some settings of the LabVIEW webserver. But it didn't help anything.
David
Solved!
Go to Solution.In my browser I don't need to define a proxy (the proxy is detected automatically). But I still tried to define a proxy for the webservice - I got the informations from our IT department.
I attached 3 screenshots of the webservice wizard with the error message...
Attachments:
ImportWebService1.gif 19 KB
ImportWebService2.gif 22 KB
ImportWebService3.gif 6 KB -
Checksum validation failed for some Xtext Maven artifacts and corresponding problems
Hi
I've been noticing some Checksum validation warnings during the build
for some Xtext Maven artifacts, e.g.,
[INFO] Downloading:
https://repo.maven.apache.org/maven2/org/eclipse/xtext/org.eclipse.xtext.util/maven-metadata.xml
[INFO] Downloading:
https://oss.sonatype.org/content/repositories/snapshots/org/eclipse/xtext/org.eclipse.xtext.util/maven-metadata.xml
[WARNING] Checksum validation failed: Checksum validation failed,
expected 872cc77705d19d8f59e22b784036430356246697 but is
56dfb41a5a16e797f052660debc509bd44d10880 for
https://repo.maven.apache.org/maven2/org/eclipse/xtext/org.eclipse.xtext.util/maven-metadata.xml
[INFO] Downloaded:
https://repo.maven.apache.org/maven2/org/eclipse/xtext/org.eclipse.xtext.util/maven-metadata.xml
(649 B at 3.2 KB/sec)
[INFO] Downloaded:
https://oss.sonatype.org/content/repositories/snapshots/org/eclipse/xtext/org.eclipse.xtext.util/maven-metadata.xml
(380 B at 0.9 KB/sec)
[INFO] Downloading:
https://repo.maven.apache.org/maven2/org/eclipse/xtext/org.eclipse.xtext.util/2.8.3/org.eclipse.xtext.util-2.8.3.pom
[WARNING] Checksum validation failed: Checksum validation failed,
expected 25d651226b11727df3b99a6325e989f4e08c82ee but is
453418e3e74ace9b69e7c34094ee712f81c55991 for
https://repo.maven.apache.org/maven2/org/eclipse/xtext/org.eclipse.xtext.util/2.8.3/org.eclipse.xtext.util-2.8.3.pom
similar for org.eclipse.xtext.dependencies, org.eclipse.xtext.xbase.lib
This hasn't prevented the build from completing so far; but now that I
started to play with some mwe2 custom generator fragments in my DSL,
when running the mwe2 workflow during the build it fails with such
exception, which I guess might be related:
java.lang.SecurityException: class
"org.eclipse.xtext.util.XtextSwitch"'s signer information does not match
signer information of other classes in the same package
can it be related?
thanks in advance
Lorenzo
Lorenzo Bettini, PhD in Computer Science, DI, Univ. Torino
HOME: http://www.lorenzobettini.it
Xtext Book:
http://www.packtpub.com/implementing-domain-specific-languages-with-xtext-and-xtend/bookWe have the same problem for weeks now. Seems, that there is really a wrong checksum in the maven repo.
-
Mitigation control: Sending failed No valid SAP sender address
GRC 5.3 SP10 RAR
In mitigation control: I have created a new control ID. When I am trying to assign it to a user getting error
"Sending failed No valid SAP sender address"
Please advise to resolve the issue. I need to mitigate user.Hello Pal,
Please go to RAR configuration -> Risk Analysis -> Additional Options. Here check if you have the parameter Enable Monitor Notification set to YES. If you do then set this one to NO. Also, kindly check and make sure that you have a valid email address maintained for each of the mitigation control monitor in Mitigation tab.
If you wish to have the parameter set to yes only then you need to do the JAVA mail settings in Visual Admin. Check configuration of the JAVA mail client, which can be done using Visual Administrator, to send the Email Notification.
(Configuration > Java Mail Client > Properties > Smtp).
Regards, Varun
Edited by: Thakur Varun on May 21, 2010 3:47 PM -
Trouble with notifications - failed schema validation
I am trying to send an Email notification from a workflow and am getting the following error:
System.Web.Services: System.Web.Services.Protocols.SoapException: The request failed schema validation: The element 'Message' in namespace 'http://schemas.microsoft.com/exchange/services/2006/types' has invalid child element 'Header' in namespace 'http://schemas.xmlsoap.org/soap/envelope/'.
List of possible elements expected: 'Sensitivity, Body, Attachments, DateTimeReceived, Size, Categories, Importance, InReplyTo, IsSubmitted, IsDraft, IsFromMe, IsResend, IsUnmodified, InternetMessageHeaders, DateTimeSent, DateTimeCreated, ResponseObjects,
ReminderDueBy, ReminderIsSet, ReminderMinutesBeforeStart, DisplayCc, DisplayTo, HasAttachments, ExtendedProperty, Culture, Sender, ToRecipients, CcRecipients, BccRecipients, IsReadReceiptRequested, IsDeliveryReceiptRequested, ConversationIndex, ConversationTopic,
From, InternetMessageId, IsRead, IsResponseRequested, References, ReplyTo' in namespace 'http://schemas.microsoft.com/exchange/services/2006/types'.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.ResourceManagement.WebServices.Mail.Exchange.ExchangeServiceBinding.CreateItem(CreateItemType CreateItem1)
at Microsoft.ResourceManagement.Mail.ExchangeProxy.ExecuteCreateItem(CreateItemType request)
at Microsoft.ResourceManagement.Mail.ExchangeServer.SendNotification(NotificationMessage message)
at Microsoft.ResourceManagement.Mail.NotificationMessage.Send(Int32 timeoutInMilliseconds)
at Microsoft.ResourceManagement.Workflow.Hosting.SendMailWorkItemProcessor.SendMailMessage(MessageContent messageContent, Int32 timeoutInMilliseconds)
at Microsoft.ResourceManagement.Workflow.Hosting.SendMailWorkItemProcessor.ProcessWorkItem(WorkItem workItem
It appears that the Exchange web service doesn't like the schema FIM is presenting. Anyone seen this? Is there a trace setting that will dump out the call to the Exchange
server?
I have tested that I can hit
https://fqdn_server/ews/exchange.asmx
from the FIM Service account and the certificate is correct.After getting product support involved, it turns out that we were pointing the FIM Service at an Exchange 2013 server but the mailbox had been created on and was physically stored on an Exchange 2010 server. By pointing FIM at the 2010 server or by trying
to send notifications to mailboxes on the 2013 server, we could make it work. Moving the mailbox from the 2010 server to the 2013 server did not solve the problem. It had something to do with mailboxes that were originally created on a 2010 server but
were accessed over EWS from a 2013 server.
It also was not a FIM issue. We used an EWS diagnostic tool (EWSEditor) to test outside of FIM and saw the same results.
The final result to get the specific user working for notifications was to create a new mailbox for them on the Exchange 2013 server. -
Process_order api - Validation Failed for Field Bill To
I am relatively new to the EBS world and I'm having some issues with calling the OE_Order_Pub.Process_order API. When I call this API I am getting a return error of "Validation failed for field - Bill To".
For a background...I have an APEX application where users can choose parts from a small part master list to add to an existing order. The existing order will not have a status of Closed or Cancelled and there will be atleast 1 line in the order before the new parts are added. The parts will be added as new lines to the order with some of the new line data defaulting to the same information as the first line. I am using EBS version 12.1.3 with a multi-org setup. It seems that the orders under one org (id=3) are working fine, but another org(id=569) they never work and keep getting the error. I am setting the context to the org of the order and initializing the apps user information with the responsibility "Order Management Super User".
Do you have any idea what could be wrong or how I can debug the error to get a little more detail?
Here is the procedure I have.
PROCEDURE TEK_ORD_PROCESS_ORDER(p_order_id IN NUMBER, p_return_code OUT NOCOPY VARCHAR2, p_status OUT NOCOPY VARCHAR2) IS
CURSOR c_order_parts IS
SELECT *
FROM TEK_APEX.TEK_ORD_ORDER_PARTS
WHERE ORDER_ID = p_order_id;
TYPE t_parts IS TABLE OF TEK_APEX.TEK_ORD_ORDER_PARTS%ROWTYPE;
v_order_parts t_parts;
--Setup variables
H_Op_Code VARCHAR2(25) DEFAULT OE_GLOBALS.G_OPR_UPDATE;
L_Op_Code VARCHAR2(25) DEFAULT OE_GLOBALS.G_OPR_CREATE;
v_install_type VARCHAR2(25) := 'PTO';
v_source_id NUMBER;
v_user_id NUMBER;
v_resp_id NUMBER;
v_app_id NUMBER;
v_debug VARCHAR2(32767);
v_oracle_order OE_ORDER_HEADERS_ALL%ROWTYPE;
v_apex_order TEK_APEX.TEK_ORD_SALES_ORDERS%ROWTYPE;
p_header_rec OE_Order_Pub.Header_Rec_Type;
p_header_val_rec OE_Order_Pub.Header_Val_Rec_Type;
p_Header_Adj_tab OE_Order_Pub.Header_Adj_Tbl_Type;
p_Header_Adj_val_tab OE_Order_Pub.Header_Adj_Val_Tbl_Type;
p_Header_price_Att_tab OE_Order_Pub.Header_Price_Att_Tbl_Type;
p_Header_Adj_Att_tab OE_Order_Pub.Header_Adj_Att_Tbl_Type;
p_Header_Adj_Assoc_tab OE_Order_Pub.Header_Adj_Assoc_Tbl_Type;
p_Header_Scredit_tab OE_Order_Pub.Header_Scredit_Tbl_Type;
p_Header_Scredit_val_tab OE_Order_Pub.Header_Scredit_Val_Tbl_Type;
p_line_tab OE_Order_Pub.Line_Tbl_Type;
p_line_val_tab OE_Order_Pub.Line_Val_Tbl_Type;
p_Line_Adj_tab OE_Order_Pub.Line_Adj_Tbl_Type;
p_Line_Adj_val_tab OE_Order_Pub.Line_Adj_Val_Tbl_Type;
p_Line_price_Att_tab OE_Order_Pub.Line_Price_Att_Tbl_Type;
p_Line_Adj_Att_tab OE_Order_Pub.Line_Adj_Att_Tbl_Type;
p_Line_Adj_Assoc_tab OE_Order_Pub.Line_Adj_Assoc_Tbl_Type;
p_Line_Scredit_tab OE_Order_Pub.Line_Scredit_Tbl_Type;
p_Line_Scredit_val_tab OE_Order_Pub.Line_Scredit_Val_Tbl_Type;
p_Lot_Serial_tab OE_Order_Pub.Lot_Serial_Tbl_Type;
p_Lot_Serial_val_tab OE_Order_Pub.Lot_Serial_Val_Tbl_Type;
p_action_request_tab OE_Order_pub.Request_Tbl_Type;
l_header_rec OE_Order_Pub.Header_Rec_Type;
l_header_val_rec OE_Order_Pub.Header_Val_Rec_Type;
l_Header_Adj_tab OE_Order_Pub.Header_Adj_Tbl_Type;
l_Header_Adj_val_tab OE_Order_Pub.Header_Adj_Val_Tbl_Type;
l_Header_price_Att_tab OE_Order_Pub.Header_Price_Att_Tbl_Type;
l_Header_Adj_Att_tab OE_Order_Pub.Header_Adj_Att_Tbl_Type;
l_Header_Adj_Assoc_tab OE_Order_Pub.Header_Adj_Assoc_Tbl_Type;
l_Header_Scredit_tab OE_Order_Pub.Header_Scredit_Tbl_Type;
l_Header_Scredit_val_tab OE_Order_Pub.Header_Scredit_Val_Tbl_Type;
l_line_tab OE_Order_Pub.Line_Tbl_Type;
l_line_val_tab OE_Order_Pub.Line_Val_Tbl_Type;
l_Line_Adj_tab OE_Order_Pub.Line_Adj_Tbl_Type;
l_Line_Adj_val_tab OE_Order_Pub.Line_Adj_Val_Tbl_Type;
l_Line_price_Att_tab OE_Order_Pub.Line_Price_Att_Tbl_Type;
l_Line_Adj_Att_tab OE_Order_Pub.Line_Adj_Att_Tbl_Type;
l_Line_Adj_Assoc_tab OE_Order_Pub.Line_Adj_Assoc_Tbl_Type;
l_Line_Scredit_tab OE_Order_Pub.Line_Scredit_Tbl_Type;
l_Line_Scredit_val_tab OE_Order_Pub.Line_Scredit_Val_Tbl_Type;
l_Lot_Serial_tab OE_Order_Pub.Lot_Serial_Tbl_Type;
l_Lot_Serial_val_tab OE_Order_Pub.Lot_Serial_Val_Tbl_Type;
l_ret_status VARCHAR2(200);
l_msg_count NUMBER;
l_msg_data VARCHAR2(200);
--Email information
v_email_address varchar2(100);
v_msg_text varchar(1000);
v_subject_text varchar(1000);
--Default line information
v_item_id NUMBER;
v_contact_id NUMBER;
v_invoice_to_org_id oe_order_lines_all.INVOICE_TO_ORG_ID%TYPE;
v_ship_to_org_id oe_order_lines_all.SHIP_TO_ORG_ID%TYPE;
v_sold_to_org_id oe_order_lines_all.SOLD_TO_ORG_ID%TYPE;
v_flow_status_code oe_order_lines_all.FLOW_STATUS_CODE%TYPE;
FUNCTION GET_ORACLE_ORDER(p_order_number IN OE_ORDER_HEADERS_ALL.ORDER_NUMBER%TYPE)
RETURN OE_ORDER_HEADERS_ALL%ROWTYPE IS
v_order OE_ORDER_HEADERS_ALL%ROWTYPE;
BEGIN
SELECT *
INTO v_order
FROM APPS.OE_ORDER_HEADERS_ALL
WHERE ORDER_NUMBER = p_order_number;
RETURN v_order;
EXCEPTION
WHEN OTHERS THEN
RETURN NULL;
END GET_ORACLE_ORDER;
FUNCTION GET_APEX_ORDER(p_order_id IN TEK_APEX.TEK_ORD_SALES_ORDERS.ORDER_ID%TYPE)
RETURN TEK_APEX.TEK_ORD_SALES_ORDERS%ROWTYPE IS
v_order TEK_APEX.TEK_ORD_SALES_ORDERS%ROWTYPE;
BEGIN
SELECT *
INTO v_order
FROM TEK_APEX.TEK_ORD_SALES_ORDERS
WHERE ORDER_ID = p_order_id;
RETURN v_order;
EXCEPTION
WHEN OTHERS THEN
RETURN NULL;
END GET_APEX_ORDER;
FUNCTION GET_SOURCE_ID(p_source_name IN VARCHAR2)
RETURN OE_ORDER_SOURCES.ORDER_SOURCE_ID%TYPE IS
v_source_id OE_ORDER_SOURCES.ORDER_SOURCE_ID%TYPE;
BEGIN
SELECT ORDER_SOURCE_ID
INTO v_source_id
FROM APPS.OE_ORDER_SOURCES
WHERE NAME = p_source_name;
RETURN v_source_id;
EXCEPTION
WHEN OTHERS THEN
RETURN NULL;
END GET_SOURCE_ID;
FUNCTION GET_ITEM_ID(p_part_number IN VARCHAR2, p_org_id IN NUMBER)
RETURN MTL_SYSTEM_ITEMS.INVENTORY_ITEM_ID%TYPE IS
v_item_id MTL_SYSTEM_ITEMS.INVENTORY_ITEM_ID%TYPE;
BEGIN
SELECT INVENTORY_ITEM_ID
INTO v_item_id
FROM APPS.MTL_SYSTEM_ITEMS
WHERE SEGMENT1 = p_part_number
AND ORGANIZATION_ID = p_org_id;
RETURN v_item_id;
EXCEPTION
WHEN OTHERS THEN
RETURN NULL;
END GET_ITEM_ID;
BEGIN
apps.mo_global.set_policy_context('S',3);
apps.mo_global.init('XXTEK');
BEGIN
SELECT USER_ID
INTO v_user_id
FROM APPS.FND_USER
WHERE USER_NAME = 'SYSADMIN';
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20001, 'Error selecting user');
END;
BEGIN
SELECT RESPONSIBILITY_ID, APPLICATION_ID
INTO v_resp_id, v_app_id
FROM TEK_APEX.TEK_RR_ACTIVE_RESP_VW
WHERE UPPER(RESPONSIBILITY_NAME) = 'ORDER MANAGEMENT SUPER USER';
--Set current user information
fnd_global.apps_initialize (user_id => v_user_id
,resp_id => v_resp_id
,resp_appl_id => v_app_id);
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20001, 'Error selecting responsibility');
END;
--Get the order information from Oracle and APEX
v_apex_order := GET_APEX_ORDER(p_order_id);
IF v_apex_order.ORDER_ID IS NULL THEN
RAISE_APPLICATION_ERROR(-20001, 'APEX Order ID is invalid: ' || p_order_id);
END IF;
v_oracle_order := GET_ORACLE_ORDER(TO_NUMBER(v_apex_order.ORDER_NUMBER));
IF v_oracle_order.ORDER_NUMBER IS NULL THEN
RAISE_APPLICATION_ERROR(-20001, 'Order Number not found in Oracle: ' || v_apex_order.ORDER_NUMBER);
END IF;
apps.mo_global.set_policy_context('S', v_oracle_order.ORG_ID);
v_source_id := GET_SOURCE_ID('IMPORT');
IF v_source_id IS NULL THEN
RAISE_APPLICATION_ERROR(-20001, 'Source ID not found for IMPORT');
END IF;
/* ********** Gather Order Header********** */
/* ********** Info. ********** */
OE_Order_Pub.Get_Order(p_api_version_number => 1.0,
p_init_msg_list => FND_API.G_TRUE,
p_return_values => FND_API.G_TRUE,
x_return_status => l_ret_status,
x_msg_count => l_msg_count,
x_msg_data => l_msg_data,
p_header_id => v_oracle_order.HEADER_ID,
p_header => NULL,
x_header_rec => l_header_rec,
x_header_val_rec => l_header_val_rec,
x_Header_Adj_tbl => l_Header_Adj_tab,
x_Header_Adj_val_tbl => l_Header_Adj_val_tab,
x_Header_price_Att_tbl => l_Header_price_Att_tab,
x_Header_Adj_Att_tbl => l_Header_Adj_Att_tab,
x_Header_Adj_Assoc_tbl => l_Header_Adj_Assoc_tab,
x_Header_Scredit_tbl => l_Header_Scredit_tab,
x_Header_Scredit_val_tbl=> l_Header_Scredit_val_tab,
x_line_tbl => l_line_tab,
x_line_val_tbl => l_line_val_tab,
x_Line_Adj_tbl => l_Line_Adj_tab,
x_Line_Adj_val_tbl => l_Line_Adj_val_tab,
x_Line_price_Att_tbl => l_Line_price_Att_tab,
x_Line_Adj_Att_tbl => l_Line_Adj_Att_tab,
x_Line_Adj_Assoc_tbl => l_Line_Adj_Assoc_tab,
x_Line_Scredit_tbl => l_Line_Scredit_tab,
x_Line_Scredit_val_tbl => l_Line_Scredit_val_tab,
x_Lot_Serial_tbl => l_Lot_Serial_tab,
x_Lot_Serial_val_tbl => l_Lot_Serial_val_tab);
--Save defaults from first line
IF l_line_tab.EXISTS(1) THEN
v_contact_id := l_line_tab(1).SHIP_TO_CONTACT_ID;
v_invoice_to_org_id := l_line_tab(1).INVOICE_TO_ORG_ID;
v_ship_to_org_id := l_line_tab(1).SHIP_TO_ORG_ID;
v_sold_to_org_id := l_line_tab(1).SOLD_TO_ORG_ID;
v_flow_status_code := l_line_tab(1).FLOW_STATUS_CODE;
END IF;
--Clear out the line array before adding any new parts
FOR i IN l_line_tab.FIRST..l_line_tab.LAST LOOP
l_line_tab.DELETE(i);
l_line_val_tab.DELETE(i);
l_line_adj_tab.DELETE(i);
l_line_adj_val_tab.DELETE(i);
l_line_price_att_tab.DELETE(i);
l_line_adj_att_tab.DELETE(i);
l_line_adj_assoc_tab.DELETE(i);
l_line_scredit_tab.DELETE(i);
l_line_scredit_val_tab.DELETE(i);
l_lot_serial_tab.DELETE(i);
l_lot_serial_val_tab.DELETE(i);
END LOOP;
/* ********** Gather Order Lines ********** */
OPEN c_order_parts;
FETCH c_order_parts BULK COLLECT INTO v_order_parts;
CLOSE c_order_parts;
FOR i IN v_order_parts.FIRST..v_order_parts.LAST LOOP
v_item_id := GET_ITEM_ID(v_order_parts(i).PART_NUMBER, v_oracle_order.SHIP_FROM_ORG_ID);
IF v_item_id IS NULL THEN
RAISE_APPLICATION_ERROR(-20001, 'Error selecting part number ' || v_order_parts(i).PART_NUMBER);
END IF;
--Clear line first
l_line_tab(i) := OE_Order_Pub.G_Miss_Line_Rec;
l_line_val_tab(i) := OE_ORDER_PUB.G_MISS_LINE_VAL_REC;
l_line_adj_tab(i) := OE_ORDER_PUB.G_MISS_LINE_ADJ_REC;
l_line_adj_val_tab(i) := OE_ORDER_PUB.G_MISS_LINE_ADJ_VAL_REC;
l_line_price_att_tab(i) := OE_ORDER_PUB.G_MISS_LINE_PRICE_ATT_REC ;
l_line_adj_att_tab(i) := OE_ORDER_PUB.G_MISS_LINE_ADJ_ATT_REC;
l_line_adj_assoc_tab(i) := OE_ORDER_PUB.G_MISS_LINE_ADJ_ASSOC_REC;
l_line_scredit_tab(i) := OE_ORDER_PUB.G_MISS_LINE_SCREDIT_REC;
l_line_scredit_val_tab(i) := OE_ORDER_PUB.G_MISS_LINE_SCREDIT_VAL_REC;
l_lot_serial_tab(i) := OE_ORDER_PUB.G_MISS_LOT_SERIAL_REC;
l_lot_serial_val_tab(i) := OE_ORDER_PUB.G_MISS_LOT_SERIAL_VAL_REC;
--Set line information
l_line_tab(i).PRICE_LIST_ID := v_oracle_order.PRICE_LIST_ID;
l_line_tab(i).header_id := v_oracle_order.header_id;
l_line_tab(i).inventory_item_id := v_item_id;
l_line_tab(i).ordered_quantity := v_order_parts(i).QUANTITY;
l_line_tab(i).operation := l_op_code;
l_line_tab(i).unit_list_price := 0;
l_line_tab(i).ship_from_org_id := v_oracle_order.ship_from_org_id;
l_line_tab(i).program_id := fnd_global.conc_program_id ;
l_line_tab(i).program_application_id := fnd_global.PROG_APPL_ID;
l_line_tab(i).order_source_id := v_source_id;
l_line_tab(i).calculate_price_flag := 'N' ;
l_line_tab(i).unit_selling_price := 0.00 ;
l_line_tab(i).request_date := v_apex_order.onsite_date;
l_line_tab(i).Schedule_ship_date := v_apex_order.onsite_date;
l_line_tab(i).promise_date := null;
l_line_tab(i).invoice_to_org_id := v_invoice_to_org_id;
l_line_tab(i).ship_to_org_id := v_ship_to_org_id;
l_line_tab(i).sold_to_org_id := v_sold_to_org_id;
l_line_tab(i).ship_to_contact_id := v_contact_id;
END LOOP;
--OE_DEBUG_PUB.DEBUG_ON;
--OE_DEBUG_PUB.Initialize;
--OE_DEBUG_PUB.SetDebugLevel(5);
--Add lines to order
OE_Order_Pub.Process_order(p_api_version_number => 1.0,
p_init_msg_list => FND_API.G_TRUE,
p_return_values => FND_API.G_TRUE,
p_action_commit => FND_API.G_FALSE,
x_return_status => l_ret_status,
x_msg_count => l_msg_count,
x_msg_data => l_msg_data,
p_header_rec => l_header_rec,
p_old_header_rec => l_header_rec,
p_header_val_rec => l_header_val_rec,
p_old_header_val_rec => l_header_val_rec,
p_Header_Adj_tbl => l_Header_Adj_tab,
p_old_Header_Adj_tbl => l_Header_Adj_tab,
p_Header_Adj_val_tbl => l_Header_Adj_val_tab,
p_old_Header_Adj_val_tbl => l_Header_Adj_val_tab,
p_Header_price_Att_tbl => l_Header_price_Att_tab,
p_old_Header_Price_Att_tbl => l_Header_price_Att_tab,
p_Header_Adj_Att_tbl => l_Header_Adj_Att_tab,
p_old_Header_Adj_Att_tbl => l_Header_Adj_Att_tab,
p_Header_Adj_Assoc_tbl => l_Header_Adj_Assoc_tab,
p_old_Header_Adj_Assoc_tbl => l_Header_Adj_Assoc_tab,
p_Header_Scredit_tbl => l_Header_Scredit_tab,
p_old_Header_Scredit_tbl => l_Header_Scredit_tab,
p_Header_Scredit_val_tbl => l_Header_Scredit_val_tab,
p_old_Header_Scredit_val_tbl => l_Header_Scredit_val_tab,
p_line_tbl => l_line_tab,
p_line_val_tbl => l_line_val_tab,
p_Line_Adj_tbl => l_line_adj_tab,
p_Line_Adj_val_tbl => l_line_adj_val_tab,
p_Line_price_Att_tbl => l_line_price_att_tab,
p_Line_Adj_Att_tbl => l_line_adj_att_tab,
p_Line_Adj_Assoc_tbl => l_line_adj_assoc_tab,
p_Line_Scredit_tbl => l_line_scredit_tab,
p_Line_Scredit_val_tbl => l_line_scredit_val_tab,
p_Lot_Serial_tbl => l_lot_serial_tab,
p_Lot_Serial_val_tbl => l_lot_serial_val_tab,
p_action_request_tbl => OE_ORDER_PUB.G_MISS_REQUEST_TBL,
x_header_rec => p_header_rec,
x_header_val_rec => p_header_val_rec,
x_Header_Adj_tbl => p_Header_Adj_tab,
x_Header_Adj_val_tbl => p_Header_Adj_val_tab,
x_Header_price_Att_tbl => p_Header_price_Att_tab,
x_Header_Adj_Att_tbl => p_Header_Adj_Att_tab,
x_Header_Adj_Assoc_tbl => p_Header_Adj_Assoc_tab,
x_Header_Scredit_tbl => p_Header_Scredit_tab,
x_Header_Scredit_val_tbl => p_Header_Scredit_val_tab,
x_line_tbl => p_line_tab,
x_line_val_tbl => p_line_val_tab,
x_line_adj_tbl => p_line_adj_tab,
x_line_adj_val_tbl => p_line_adj_val_tab,
x_line_price_att_tbl => p_line_price_att_tab,
x_line_adj_att_tbl => p_line_adj_att_tab,
x_line_adj_assoc_tbl => p_line_adj_assoc_tab,
x_line_scredit_tbl => p_line_scredit_tab,
x_line_scredit_val_tbl => p_line_scredit_val_tab,
x_lot_serial_tbl => p_lot_serial_tab,
x_lot_serial_val_tbl => p_lot_serial_val_tab,
x_action_request_tbl => p_action_request_tab);
-- OE_DEBUG_PUB.DEBUG_OFF;
p_return_code := l_ret_status;
IF l_ret_status != 'S' THEN
DBMS_OUTPUT.PUT_LINE(l_msg_data);
IF l_msg_count = 1 THEN
p_status := OE_Msg_Pub.Get(1,'F');
ELSE
FOR i IN 1..l_msg_count LOOP
p_status := OE_Msg_Pub.Get(i,'F') || '<br />';
END LOOP;
END IF;
p_status := 'Error loading lines<br>' || p_status;
ELSE
p_status := 'Order Processed Successfully<br>' || v_order_parts.COUNT || ' Line(s) Loaded';
END IF;
-- WHILE OE_DEBUG_PUB.G_DEBUG_INDEX < OE_DEBUG_PUB.CountDebug LOOP
-- OE_DEBUG_PUB.GetNext(v_debug);
-- DBMS_OUTPUT.PUT_LINE(v_debug);
-- END LOOP;
EXCEPTION
WHEN OTHERS THEN
ROLLBACK;
RAISE;
END TEK_ORD_PROCESS_ORDER;Thanks!
Jonathan HartHello,
Try the following
1) Check if any processing constraints are applied to customer/location
2) Try to create a new customer and associate internal location.
Create a new order to reproduce the issue
Thanks
-Arif -
VALIDATION FAILED when setting up mobileme account on ipad
I get this same problem when trying to setup my "Find Iphone" on my ipad.
I first try to add my mobileme account as follows: settings > mail, contacts calendars > mobile me
when I put in my account login and password, i get the following response: "VALIDATION FAILED: the identity of this ipad could not be validated."
Please advise. Thanks!I get this same problem when trying to setup my "Find Iphone" on my ipad.
I first try to add my mobileme account as follows: settings > mail, contacts calendars > mobile me
when I put in my account login and password, i get the following response: "VALIDATION FAILED: the identity of this ipad could not be validated."
Please advise. Thanks! -
Sending mail to invalid mail address but domain valid.im not getting any NDR
Hi,
In my organisation I'm sending mail to invalid email address but domain is valid ...i'm not getting any NDR. I want NDR like this
The e-mail address you entered couldn't be found. Please check the recipient's e-mail address and try to resend the message. If the problem continues, please contact your helpdeskHi,
Please check whether other users can receive NDR message when sending mails to invalid email address. If the issue happens to all users and all related configurations are proper, please check whether there are any transport rules directly
deleted the mails that send to an invalid address.
Thanks,
Winnie Liang
TechNet Community Support -
I get the following error when trying to use the SQL Server JDBC Driver with WL
6.0. The license we have a developer's license. We have that stored in license.bea
in the bea home directory. I have that directory loaded up in the classpath as
well. If I remove the license.bea file, I do not get the license not found error,
I get the same error as below. Is there something I need to do at connection
time? Do I need some sort of .xml file in the classpath with this information?
Thanks,
Anil
$$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
jDriver/MSSQLServer4: license error, license unit validation failed!
$$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$"Anil Arora" <[email protected]> wrote in message
news:3b868c20$[email protected]..
It can't really be that because I am using a standalone connection outsideof the
weblogic server. Could that be the cause? I can't use the driver outsideof
the appserver?You can not use the driver outside of the server until you purchase it.
Regards,
Slava Imeshev
>
Anil
"Sree Bodapati" <[email protected]> wrote:
Did you check if there are some connections created in the pool? if there
are some connections, you may be exceeding the number of connections
you can
create using this license.
sree
"Anil Arora" <[email protected]> wrote in message
news:3b85bee9$[email protected]..
I get the following error when trying to use the SQL Server JDBC Driverwith WL
6.0. The license we have a developer's license. We have that storedin
license.bea
in the bea home directory. I have that directory loaded up in theclasspath as
well. If I remove the license.bea file, I do not get the license notfound error,
I get the same error as below. Is there something I need to do atconnection
time? Do I need some sort of .xml file in the classpath with thisinformation?
Thanks,
Anil
$$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
jDriver/MSSQLServer4: license error, license unit validation failed!
$$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$ -
<script type="text/javascript"><!--
function validateForm() {
with (document.drbrake) {
var alertMsg = "The following REQUIRED fields\nhave been left empty:\n";
if (fullname.value == "") alertMsg += "\nfullname";
if (emailcheck.value == "") alertMsg += "\nemailcheck";
if (telephone.value == "") alertMsg += "\ntelephone";
if (selectproduct.value == "") alertMsg += "\nselectproduct";
if (problem.value == "") alertMsg += "\nproblem";
if (alertMsg != "The following REQUIRED fields\nhave been left empty:\n") { alert(alertMsg);
return false;
} else {
return true;
// -->
</script>
<script language="JavaScript1.2">
//Advanced Email Check credit-
//By JavaScript Kit (http://www.javascriptkit.com)
//Over 200+ free scripts here!
var testresults
function checkemail(){
var str=document.validation.emailcheck.value
var filter=/^([\w-]+(?:\.[\w-]+)*)@((?:[\w-]+\.)*\w[\w-]{0,66})\.([a-z]{2,6}(?:\.[a-z]{2})?)$ /i
if (filter.test(str))
testresults=true
else{
alert("Please input a valid email address!")
testresults=false
return (testresults)
</script>
<script>
function checkbae(){
if (document.layers||document.getElementById||document.all)
return checkemail()
else
return true
</script>I do see issues with the script, but do you realize that HTML5 has all this capability build in, so not a single bit of the code you posted is needed? Of course there may be a reason you are doing it the way you are, but I don't know what that reason would be.
In your forms, you can simply add "required" to an input field to make it required. And by making an email field the email type, it will automatically be validated for correctness. See below:
<input type='text' value='<?php echo last_name ?>' name='last_name' required />
<input type='email' value='<?php echo email ?>' name='email' required />
Assuming that your form is processed by PHP, you would then use further validation in PHP. But the HTML5 validation is just as good as javascript validation and easier to use.
With the HTML5 validation, all fields remain populated and the form cannot be submitted if anything fails validation. I added the value attribute to the input examples because normally, if the PHP validation fails, you want to re-populate the form with what is stored in the POST array. -
Failed Logins - Token Based Server Access Validation Failed
Hi All-
I am trying to track down, well for lack of a better word (an annoyance). I have a VM running a proprietary utility (VMware update manager) that connects to a remote SQL VM. This connection is via a service account that from the surface has the
appropriate permissions. The setup and utility has been in and is working as it should. However in our logs we are constantly seeing.
SQL Event Viewer - Login failed for DOMAIN/REMOTESERVERNAME$ Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors [CLIENT: REMOTEIP OF REMOTESERVERNAME]
Then in the SQL Logs I am seeing the same error and also - ERROR 18546, Severity 14, State 11
I have read dozens of threads - pointing to UAC. I have elevated SSMS via UAC and allowed it to run as administrator. Also ran as admin, and reapplied the permissions to that service account, db_owner
What I have read is about AD/user account. However in this case I am seeing the remote server name, not service account. Got me thinking a service is running as network or local system, and phoning home to SQL. However everything I see
is using the service account for that utility. Also in the event viewer in the security portion for that same time, I see the login and log off as successful. Could anyone try to point me in the right direction, without flat out adding the servername
to the local SQL VM administrators group.
Thank you in advance for any assistance.Rather than adding the machine account to the admin group, you could do:
GRANT CONNECT TO [Domain\Remoteservername$]
And then you could set up a logon trigger that captures information about the login. That would include app_name() as well as the Windows process id. This could help you track exactly which process that is knocking on the door.
Erland Sommarskog, SQL Server MVP, [email protected] -
[CUP 5.3] Error while email validation
Hello all,
Anyone seen this before in CUP 5.3 SP15?
I have an access request form in which I allow user lookup. The user lookup is linked with an SAP HR system.
When I search users on name, only the users that have an emailaddress filled in in the infotypes show up in my list. Users without an emailaddress are not shown. I can only get them in my search results when I specifically search for them on user ID.
When I then select the user without emailaddress and insert him/her into my access request form, I always receive the "error creating request" message. The log tells me:
2011-09-20 15:29:28,326 [SAPEngine_Application_Thread[impl:3]_24] ERROR EUCreateRequestAction.java@224:loadHandler() : Error while email validation = E-mail address
Users with an emailaddress are no problem.
Even when I fill in an emailaddress manually, CUP apparently keeps using the emailaddress from the infotype.
Anyone know how to resolve this?
Thanks in advance,
Edited by: Lanssens Tom on Sep 20, 2011 6:09 PM (spelling)Hello Srihari,
User Email Address is a Mandatory field which cannot be changed. The only option to change is to turn off "Editable". However, if I do that I receive the warning "It is better to make the field editable, because the end user cannot submit the request, if the field value is not available in the user's data source".
I know that the best solution/workaround is to make sure that all users in the HR list have an emailaddress, so we are going to follow up on this with a script. Still, I would like to know why I can't find nor work with users that don't have an emailaddress, and why I can't update their emailaddress myself manually via the CUP.
Best regards,
Tom -
.MAC account credentials validation failed
I have never had trouble publishing before and now I get this error
".Mac account credentials validation failed for account ksporterproductions."
I haven't changed anything - suggestions??
iweb version 1.1.2 2006I have exactly the same problem when trying to publish with iWeb 06- .Mac account credentials validtion failed- or iWeb opens the .Mac pane from system preferences, I insert password & username, press return, it says password valid, and nothing happens. I return to iWeb, and publishing activity has stopped.
This is clearly related to MobileMe switch.
This is a total pain- get it sorted Apple, or at lest reply to tech support e-mails.
Pixxed Off.
Yours Beefybov -
Certification Validation fails only when executed through Command prompt
I am developing a testing application using Java which calls multiples services a certain number of times. A few of these services are https protocol and hence require certification validation when the call is established.
The testing application works fine when i run it on Eclipse but the requirement is to run a .bat file which in turn will call the java class which has some logic and then call the client stub (which i generated on Eclipse using the wsdl)
The problem is when i try calling the java class from .bat file or command prompt the call fails with the following error :-
======== Running SecurityService ================
16-May-2011 11:40:36 org.apache.axis.utils.JavaUtils isAttachmentSupported
WARNING: Unable to find required classes (javax.activation.DataHandler and javax.mail.internet.MimeMultipart). Attachmen
t support is disabled.
AxisFault
faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userException
faultSubcode:
faultString: javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path validation faile
d: java.security.cert.CertPathValidatorException: subject/issuer name chaining check failed
faultActor:
faultNode:
faultDetail:
{http://xml.apache.org/axis/}stackTrace:javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorExc
eption: PKIX path validation failed: java.security.cert.CertPathValidatorException: subject/issuer name chaining check f
ailed at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Alerts.java:174)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.fatal(SSLSocketImpl.java:1591)
at com.sun.net.ssl.internal.ssl.Handshaker.fatalSE(Handshaker.java:187)
at com.sun.net.ssl.internal.ssl.Handshaker.fatalSE(Handshaker.java:181)
at com.sun.net.ssl.internal.ssl.ClientHandshaker.serverCertificate(ClientHandshaker.java:975)
at com.sun.net.ssl.internal.ssl.ClientHandshaker.processMessage(ClientHandshaker.java:123)
at com.sun.net.ssl.internal.ssl.Handshaker.processLoop(Handshaker.java:516)
at com.sun.net.ssl.internal.ssl.Handshaker.process_record(Handshaker.java:454)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:884)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(SSLSocketImpl.java:1096)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1123)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1107)
at org.apache.axis.components.net.JSSESocketFactory.create(JSSESocketFactory.java:186)
at org.apache.axis.transport.http.HTTPSender.getSocket(HTTPSender.java:191)
at org.apache.axis.transport.http.HTTPSender.writeToSocket(HTTPSender.java:404)
at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:138)
at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
at org.apache.axis.client.AxisClient.invoke(AxisClient.java:165)
at org.apache.axis.client.Call.invokeEngine(Call.java:2784)
at org.apache.axis.client.Call.invoke(Call.java:2767)
at org.apache.axis.client.Call.invoke(Call.java:2443)
at org.apache.axis.client.Call.invoke(Call.java:2366)
at org.apache.axis.client.Call.invoke(Call.java:1812)
at com.telenor.security.server.service.SecurityServerServiceHTTPBindingStub.loginByPasswordForAssertion(T
elenorSecurityServerServiceHTTPBindingStub.java:812)
I have made sure that the required certificates are imported into the Java Keystore . What i find confusing is how does Eclipse not have an issue with the certificate validation ?JSSE Reference Guide, Customization section.
-
Mail won't sent Group contacts. Has been OK previously, but now says the e-mail address isn't valid. Any suggestions please., Mail won't sent Group contacts. Has been OK previously, but now says the e-mail address isn't valid. Aly suggestions please.
Check all the addresses in the group to make sure they're correct. Many mail servers, Exchange for example, will reject a message entirely if any email in the group is incorrect.
Regards.
Maybe you are looking for
-
How creating a llb that will contain all subvis of an upper vi?
Hi, I developed an application under 6.1, which is composed of subvis coming from several developments, stored in various places on my PC... In order to distribute it, I was wondering if it was possible, from the upper vi, to create a llb (or a distr
-
Moving Exchange 2003 mailboxes to Exchange 2010
Hello I have a new domain with Exchange 2010 server. I plan to join users to this domain but would like to know the best plan in moving the existing Exchange 2003 mailboxes over. Can I just import the PST files into their new Exhaneg 2010 mailboxes o
-
Safari 2.0.2 tab behaviour
In the latest incarnation of Safari, version 2.0.2 (416.12), which i assume came with the 10.4.3 update, the tab behaviour is really weird It seems when I close a tab it moves to the previous tab you were looking at rather than in previous versions w
-
Dear Expert, I have requirement to use different lot sizing for each vendor. Background of this requirement because in my company, there are some material that can be procured with more than 1 vendor (use quota arrangement). For example : we want to
-
How to get T4CConnection from OracleConnection.
Hi, The dataSource.getConnection(); in my code is returning weblogic.jdbc.wrapper.PoolConnection_oracle_jdbc_driver_OracleConnection@0 But I need weblogic.jdbc.wrapper.PoolConnection_oracle_jdbc_driver_T4CConnection@ Because ArrayDescriptor.createDes