E-recruiting: how to use custom BSPs

Hi experts,
Can anyone tell me how and where do we replace standard BSP applications in EREC.
Regards,
Bharat

Dear Bharat,
It would help if you specify which standard BSP applications you want to replace.
If you want to replace standard BSP applications then you can do them in T77RCF_LOG_APPL. Replace the standard application with your Z BSP. Do NOT delete any entries from this table.Incase of search applications, pls be careful to replace in V77RCF_SMG_NAVI also.
If it is only a tab that you need to replace, then you create a Z BSP and modify the container sequence to point to the new BSP in IMG. Eg : Requistion Maintenance container sequence
If you want to add an application to an extra link which will be given in the application, that also can be done from IMG for modification of start pages.
Regards,
Sowmya

Similar Messages

How to call custom BSP application on click of BACK button for SC in EBP.

Hi All,
We are implementing OCI using custom BSP applications.In EBP SC screen ,in step1 (Select Goods/Services), the links for these BSP applications are displayed.
The user can create a shopping cart using these applications , after the items are transfered from BSP to SC on standard EBP screen , in step2
there are four buttons ,
1)Refresh
2)Check
3)Back
4)Continue.
We need to call one of our custom BSP applications on click of this BACK button
How can i acchieve the same?
Do i need to make changes in the standard ITS application or thers some other way?
Thanks,
Anubhav.
Edited by: Anubhav Jain on Jul 1, 2008 7:24 AM

To call a wd abap application from BSP use the method CL_WD_UTILITIES=>CONSTRUCT_WD_URL then just create a link in bsp with the url returned like this:
<a href="url">Link</a>
To pass data from wd abap to bsp or vice versa that a look at this blog: /people/koen.labie2/blog/2006/11/29/eating-cookies-with-webdynpro-and-bsp
regards,
Fabio Louzada Saito

How to run custom BSP application in UI frame work.

Hi,
Can you please tell me how to run custom BSP application in UI frame work.
I have copied CRM_UI_FRAME application into ZCRM_UI_FRAME. Now if i am trying to test this particular application but in URL of IE i am able to see that its always calling CRM_UI_FRAME application.
Can any body help me out in this?
Rgds,
Jat.

Hi!
You will find that and some other interesting stuff here
https://websmp206.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700001006302007E
The documents name is How-to Guide Framework Enhancements
rollo
Edited by: rollo on Aug 8, 2008 8:20 AM

How to use custome tag lib in the JSP page?

How to use custome tag lib in the JSP page?...with JDeveloper

http://www.oracle.com/webapps/online-help/jdeveloper/10.1.2/state/content/navId.4/navSetId._/vtTopicFile.working_with_jsp_pages%7Cjsp_ptagsregistering~html/

How to use custom tag in jsp

sir
plz tell me how to use custom tag in jsp.plz describe it.
i will be thankful to u

Do you want to use taglibs or develop custom tags? Either way take a look at these:
http://java.sun.com/j2ee/tutorial/1_3-fcs/doc/JSPTags.html
http://www.stardeveloper.com/articles/display.html?article=2001081301&page=1
http://www.onjava.com/pub/a/onjava/2000/12/15/jsp_custom_tags.html
http://jakarta.apache.org/taglibs/tutorial.html
http://www.ibm.com/developerworks/edu/j-dw-java-custom-i.html
http://www.herongyang.com/jsp/tag.html

How to use custom control.

hi all,
how to use custom controls in screen painter.
can i add image to my screen using custom control.
is there any other way to display image on screen.
give me some notes about custom control.
and sample programs to display image and also the use of custom control.
regards,
bhaskar.

hi vinod,
u can use the class <b>cl_gui_picture</b> to work around with pictures on the screen
just define a custom control on the screen
create an object of custom container.
create another object of cl_gui_picture giving container name as the parent name...
u can check out the class using the transn se24....
pls post if additional info is required...
Regards,
Vs

HOW TO: using custom fonts in native storyboard views from an ANE on iOS

Hey,
In our apps, we have embedded storyboards into an ANE, and successfully used those screens in an AIR app, and figured out how to use custom fonts in those views.
I wrote a quick blog post about it and just thought I'd share it real quick in case it helps someone.
ANE for iOS with Custom Framework – Using Custom Fonts | khef.co

Hi WayHsieh,
>>can I just "install" fonts through Word App? Does Word Apps have enough privilege to install fonts on Windows? Can I just click a button in Word App, and then it will install fonts automatically?<<
Based on my understanding, it is hard to achieve the goal. Because the app webpage is hosted inside an Internet Explorer control which, in turn, is hosted inside an app runtime process that provides security and performance isolation and it is under
low-Integrity level.
Here is the figure for apps for Office runtime environment in Windows-based desktop and tablet clients:
You can get more detail about Privacy and security from links below:
Privacy and security for apps for Office
Hope it is helpful.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to call custom BSP application (copied from standard)

Hi,
I came across 1 interesting link in SDN.
[Enhancement procedure of BSP application HRRCF_RECRUITER in eRecruitment]
My requirement is also similar.
I need to copy the HRRCF_TRM_SRCH application.
I know how to make the changes for the logic (like copying the standard controller & iterator class etc.)
But I donu2019t know how to call the custom BSP application.
One requirement is, I need to call a BSP application, in which there are only UI(user interface/screen) changes .
That is, if there are only changes made to hitlist_cand.bsp page . And no changes made to hitlist_cand.do page.
Eg: Removing one button from screen.
Second requirement is, I need to call a BSP application in which there are logic changes also.
(I know how to change the standard controller class to custom class)
Eg: Changing logic of button.
We tried renaming the application name from standard to custom one (with Namespace=SAP itself, though it gave a warning) in the table T77RCF_LOG_APPL .
Then we used this name to configure the start page link. But still the execution control is going to standard page & not to custom BSP application.
How will I know which BSP application(Appl A), is calling the BSP application (Appl B) in which I want to make changes ?
The starting application is HRRCF_START_INT.
Would really appreciate solutions posted.
Thanks,
Nisha Vengal.

Hi Nisha,
I think you have an issue to call custom BSP.
- Ignore the warning message (in the table T77RCF_LOG_APPL) as it is just a warning message. I did not touch start page link at all.
- Additionally you need to make (I had to made) an entry in table u2018V77RCF_SMG_NAVIu2019.
Let me know, if you need anything else.
...Naddy

How to use custom IPs in Embedded Linux

Hello,
I have designed and implemented two IP cores in Vivado.
The first is a HLS implemented block (realized with the Vivado HLS video libraries(, with AXI interfaces and connected with a Video DMA. I should send cv::Mat objects to it somehow.
The second one is a custom designed block which also uses streaming AXI interfaces which is connected with a normal AXI DMA.
In both cases, I know how to interact with those units on a bare-metal application, using the BSP provided drivers. But, when it comes to Linux/Petalinux? Where do I find headers and functions like the one provided automatically by the standalone (bare-metal) os?
Thanks a lot for your help.
Giorgio

giorgio.lopez wrote:
The first is a HLS implemented block (realized with the Vivado HLS video libraries(, with AXI interfaces and connected with a Video DMA. I should send cv::Mat objects to it somehow.
Compile the VDMA kernel module, which you can find right there
https://github.com/Xilinx/linux-xlnx/tree/master/drivers/dma/xilinx
then you need to write your own module to map to this new dma channel, this has been mentionned on several topics.
Finally you write a userspace program which opens this channel and send some data over it.
giorgio.lopez wrote:
The second one is a custom designed block which also uses streaming AXI interfaces which is connected with a normal AXI DMA.
basically the same thing, I have never used VDMA but I think it handles 2D data compared to regular DMA module.
giorgio.lopez wrote:
In both cases, I know how to interact with those units on a bare-metal application, using the BSP provided drivers.
If you are not familiar with kernel modules, you need the hardware address to address the DMA module.
In bare-metal you accessed those addresses directly, in Linux you address them through virtual addresses mapped to physical addresses.
A DMA transaction is a little different than regular bus transactions in the sense it allows you not to address each word, the CPU sets the destination address, waits for an end of transfer interrupt, the DMA controller handles the transfer.
giorgio.lopez wrote:
Where do I find headers and functions like the one provided automatically by the standalone (bare-metal) os?
you need to use the Linux kernel APIs, in this project you will need the DMA API basically
#include <linux/dmaengine.h>
#include <linux/dma-mapping.h>
plus learn how to memory map and handle interrupts.
Relevant Docs:
The Bible - heavy but I seriously recommend reading it a couple of times to understand key chapters
Linux DMA API
Might be of some interests
DMA from user space (Xilinx) - great
DMA in kernel space (Xilinx) - great

How to use customer extension table for schedule line for shopping cart ?

Dear Experts,
One of our client wants to have schedule lines in shopping cart item. I am thinking of using customer extension table at item level for shopping cart. Could you please help me on how I should proceed with the appending the structures so that the end user can fill the shopping cart schedule line details?
Which fields should I consider in such cases?
Thanks and regards,
Ranjan

Hi.
I guess you use SRM 7.0. Please go to IMG.
SRM -> SRM Server -> Cross-Application Basic Settings -> Extensions and Field Control (Personalization) -> Create Table Extensions and Supply with Data
Regards,
Masa

Question about How to Use Custom CellEditors

Hi:
I have been trying to implement something like this: I have a JPanel, and when you double-click a particular spot on it, I want a textbox to appear. Currently, I am implementing it by using an undecorated JDialog that contains a JTextField in it (such that the text field occupies all the space in the dialog, i.e. you can't even tell that there is a dialog). This seems like a hack to me.
Another alternative that I have been thinking about is using layered panes, and hiding the textfield below the jpanel, and only bringing it to the front when the user double-clicks.
Then, I stumbled onto custom celleditors. Now, it seems that everyone is using them in JTables, JLists, JComboBoxes, etc. and I was wondering if it is something that I can use with a JPanel.
Can anyone comment on the implementations I am considering, as well as using custom celleditors with a JPanel?
Thanks in advance,
LordKelvan

Still don't understand your requirement. Does the text field stay there or disappear after the data is entered? If it disappears, then how do you change the value, do you have to click on the exact same pixel again?
Maybe you could use a MouseListener and then display a JOptionPane or JDialog to prompt for the information. Or if you want to display a JTextField then add a JTextField to the panel and then when the user enters the data by using the enter key or by clicking elsewhere on the GUI you remove the text field from the panel.

How to use custom API's

Hi All,
In OIM how can i use my own/Custom API"S. Wher do i need to place the Jar/Class files. Like in other Identity Management tools (I only have the experience of SUN) you can place the files under WEB-INF/lib or WEB-INF/classes and then can easily use them, does OIM provides this/similar kind of functionality and how we can use that.

Hi,
If you want to use custom API to create adapter then put the jar file in <OIM_Install>/xellerate/Java Task/
folder and if you want to use them to create task Schedular then put it in <OIM_Install>/xellerate/Schedular/
regards

How to use Custom Search in Dynamic Page or HTML Portlet ?

Gurus,
1. I have a tab called My Space in the portal web site, where user gets a personalized view of the content.
2. I am using custom attributes and custom item types. I have a custom attribute called 'Location', which is a attribute of custom item types.
3. I have 2 pages - News and Events.
4. All the content in News and Events page is tagged by the attribute 'Location'.
5. The requirement is to let the user search the News and Events by Location.
6. To achieve this I used the Custom Search portlet and the user can select the attribute Location and see the resultant News and Event items by location in the Search portlet.
7. The requirement is to present the News items and Event items in separate regions on the page and show only the first 5 News and Event items in the result and show a More link which would guide the user to rest of the News and Event items.
8. Eventually there may be more content other than News and Events tagged by location. If so, the requirement is to create a new region and display the new content.
9. How would I do this using custom search ? I was thinking if there is anyway I could use the custom search api (where can i find it ?) in the HTML portlet or Dynamic page and submit the result to IFRAMES in each region and show the output ?
Pls advise.
Thanx a bunch.

I would suggest that you use two custom search portlets; one for the news items and one for the events items. Switch the custom search portlets to "AutoQuery" mode and add the relevant criteria. On the results display tab of the the "edit defaults" screen, choose to show just 5 items.
To add a link to show the user mode results, I'd create two new pages that have just a single custom search portlet on it that is customised to show more of the results and maybe has the pagination links enabled.
Then I'd add two "Page Link" items underneath the two news and events portlets on the first page in an item region.
I'm sure there are other ways of doing this as well. Hope that helps to get you started.

How to use custom control in Dialog Programming?

How can I call a subscreen using custom control in Dialog Programming?
The required subscreen contains a calender. Any class or something available for this purpose. Please suggest.

As [vinraaj|http://forums.sdn.sap.com/profile.jspa?userID=3968041] wrote, call transaction SE51, there is a Wizard to help you generate the table control, it will create the table control and some includes with PBO/PAI modules > Read [Using the Table Control Wizard|http://help.sap.com/saphelp_bw/helpdata/en/6d/150d67da1011d3963800a0c94260a5/frameset.htm]
Also there is a tutorial in the wiki, read [Learn Making First Table Control |http://wiki.sdn.sap.com/wiki/display/ABAP/LearnMakingFirstTableControl] by [Krishna Chauhan|http://wiki.sdn.sap.com/wiki/display/~nc0euof]
Regards,
Raymond

How to use customized exception

Hi all,
I have a problem using struts-action-mappings.
I have a method for update in my app module, and i'm using that method with data action.
In that method, I have to throw my customized exception to user if there is error. I just don't know how to catch the exception and display it in page.
I've read about struts page flow diagram elements and know there are Exceptions and Global Exceptions. But i still don't know how to use them.
What i want to know is can I relate my custom exception with Exceptions/Global Exceptions in struts diagram? And if so, can anybody show me an example for it?
Thanks

1.Create a method GET_ACTORS using RH_GET_ACTORS,
2.Create a container element 'Actors' type string with multiline.
3.Create Task, where you can call the Method GET_ACTORS and pass the Container values of 'Actors' from Method->Task->Workflow
4.Create a Step type before creating the Step mail and include the previous Task.
5.Now you can create the step Mail. Give the Recipient Type as 'Expression'-> Select the Container Element 'Actors' from WF container
But remember the values should be Passed from the task to Workflow in Binding correctly.
Regards,
Sriyash

E-recruiting: how to use custom BSPs

Similar Messages

Maybe you are looking for