E1200 V2 with no "internet access policy" in built-in web-based setup

I just bought a factory refurbished E1200. The label on the bottom says it is a Version 2 model. When I purchased it, it was loaded with 2.0.02 firmware but I upgraded the firmware to 2.0.04
My problem is that I'm trying to setup MAC address-based restrictions thru the manual/web-based setup and when I click on the "Access Restrictions" tab, I only have simple "Parental Controls" and not the advanced "Internet Access Policy".
Is it possible that I have a mislabeled V1 device? If that is the case, how is it that I was able to upgrade the firmware using firmware from the V2 downloads section.
Do V! and V2 units use the same firmware but more importantly, how do I upgrade the built-in software so that I have the advanced "Internet Access Policy" controls?
Thanks!
Eric
Solved!
Go to Solution.

Very strange indeed then! My subtab only has "Parental Controls" listed.
I've compared it to the one shown here ( http://ui.linksys.com/files/E1200/2.0.00/inter_access.htm ) - and mine does not look like this at all!
I think i have a mislabeled V1 model or at least V1 software loaded,
Does anyone know if it is possible to download and reload the software that is built in to the router or do I need to return it and get a (hopefully) new one?
Thanks!
Eric

Similar Messages

RVS4000 Internet Access Policy issues after FW upgrade to 1.3.3.5

Hi,
we run a small home/business network using an RVS4000v1. Everything is pretty simple and straight forward. We use 10 different Internet Access Policies (IAP) that's it. We recently upgraded the Firmware to 1.3.3.5.
Since then all IPaddresses (that is 2 IPaddresses in total) that have 24 hr access to the internet will get cut off the internet just before/around midnight. All IAPs that use a time window (e.g. 8:00 AM to 10:00 PM) are working fine (also on the next day).
The web GUI still works and the status of the routers still says its up and the WAN access is up as well. We have to reboot the router (through the webGUI) to get 24hr access again or save the same IAP again.
Reading the release note for FW 1.3.3.5 I note that there is a know issue with IAP.
>>QUOTE
The second Internet access policy does not work.
Work Around: Configure only one Internet access policy within a 24-hour
interval.
>>UNQUOTE
I am just not sure how to read it.
Is it only the second IAP that has the issue (and the IAP numbers 3 to 10 do not)? Or will only ONE IAP work and no others?
Or is the second policy that uses a 24hr setting meant to be the issue? If this was the case, could a work around be to set the time from 00:05 AM to 11:55 PM (or in my case 00:05 to 23:55)?
We appreciate your help
Andy

Friends,
The issue is resolved. I just switched off my phone and removed the battery. Inserted the battery after a minute or so and everything seems to be fine. Even the available memory shown is around 25.15 GB.I had even forgotten to take a backup before upgrading to PR 1.3. Still all my Photos,Videos,Documents are as they were before upgrading.
Thankfully i can heave a sigh of relief now
Cheers,
Goks

Change Flash Security Settings With No Internet Access?

Hello
I have firefox at home with no internet access, is it posible
to alter my flash installation so it enables access to other
content. it brings up a settings window but that just goes to a
dead url.
I have a a collage disk but it will not run untill I alter
the settings of flash to allow acess to other site, other location?
Please help?

phil ashby wrote:
> Glad it worked!
>
> Urami, I did some fairly extensive tests with this idea
and it seemed to work
> each time - although all our corporate machines have the
same build. Even if
> the directory didn't exist, if you created it and placed
the SOL inside, it
> words. In the end I never actually used it as I
distributed the app as an exe
> which doesn't have such draconian security requirements,
also it obviously
> overwrites the users original version, if present.
I agree with you, I tried different SOL editor and it work
when i tried.
I believe what I used was more than SOL explorer/reader
rather then editor
even tho it has this option is seem the file stop working and
hence the
problem I was claiming about the files not work properly.
Perhaps it was changing something and flash did not like
these changes.
Anyhow, I did try another tool and did manage to work.
Thanks
> Personally, I think it's a bit of a hole in the whole
Flash security issue.
Won't comment on that one :) Something just seem way
unnecessary and silly...
Best Regards
Urami
!!!!!!! Merry Christmas !!!!!!!
Happy New Year
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Using Creative Cloud on a desktop in a rural area with no Internet access

I have a Creative Cloud subscription for my home desktop. I will soon be participating in a photography workshop in a rural area with NO INTERNET ACCESS. I don't own a laptop and will be hauling my desktop to the place we're staying. I know the software is installed on the machine and I should be fine with using it without online access, correct? Am I also correct in thinking it won't be "seen" as being used on a second computer because while I use it on this trip I won't have Internet access and therefore no IP address?

Hi there
The only thing that might cause you trouble is if your workshop is over a month long. While using applications downloaded from Creative Cloud, internet access is required once a month for a routine license check. Here's a snipet from the Creative Cloud FAQ:
http://www.adobe.com/products/creativecloud/faq.html
Do I need ongoing Internet access to use my Creative Suite applications?
Because your Creative Suite applications are installed directly on your computer, you will not need an ongoing Internet connection to use them on a daily basis. However, you will need to be online when you install and license your software, and at least once every 30 days thereafter. The software will alert you when you need to connect to the Internet for a license status check.
A quick note: if the product is unable to verify your license at the 30 day mark, a 7-day grace period will begin. However, if you are not able to access internet within those 7 days, your applications will be blocked (Soucre: http://forums.adobe.com/message/4513667#4513667)
Regarding your second question - as long as you are using the same device you already have your applications installed on, you'll still only have one device registered to your account.
If you have any more questions, please don't hesitate to post here again.
Cheers!

I received a text today while at work about iCloud keychain verification code. I have not signed up for it or anything that uses it. I work out of the city with limited internet access so not sure why I would be getting this. Is my info safe??

I received a text today while at work about iCloud keychain verification code. I have not signed up for it or anything that uses it. I work out of the city with limited internet access so not sure why I would be getting this. I only got this number about a month ago. Apparently someone else had the number before because I get texts from his family members wondering whats going on. I got one yesterday and the person didn't seem to thrilled that the number was cutoff and today I got 2 texts about iCloud Keychain which I don't even know what it is. Seems suspicious to me. If the person who use to own the number is doing it he should know it is not his number anymore because he obviously didn't pay his bills. I'm not too sure about iCloud Keychain so just want to know my info safe?? It says it can store credit card numbers which is what gets me worried. Frankly I think it's pretty stupid to save that kind if information with any kind of app. But I don't want some random person trying to access my personal information because they are bitter they lost their number. Please let me know as soon as possible so I can change passwords or anything that is needed.
thanks

If it were me, I would go to my carrier and get a new number. Since you have only had it for a month, the inconvenience would be minimal.
Barry

I recently bought an i phone 5, but in the home with wireless internet access, it si countinued when off, i do not know what reason. but i go to apple store, the phone can working with Wi-Fi

i recently bought an i phone 5, but in the home with wireless internet access , it is continued when off, sometimes can not working,
i do not know what reason, but i went to apple store, Ha, the phone can go to Wi - Fi and connected is good.

but in the home with wireless internet access , it is continued when off, sometimes can not working,
What does "it is continued when off" mean?
And the same for "somtimes can not working"?

A basic phone with no internet access.

I need a phone for my son with no internet access whatsoever. I have him set up on a plan that allows me to block data but if he has access to wifi he can still access the internet. I am talking about non smartphones. I am frustrated and disappointed that AT&T (or anyone else) does not offer a phone that is not wifi enabled. Even a $9.99 tracfone gives web access!

Thanks to both of you for your replies. My son only needs a phone when he travels which is about 10 days out of the year so gophone is definitely the way to go. I just found that you have to be very careful with the phone that you use. Most phones today - even the $10-$15 flip phones - allow WiFi access. You can block paid data use on the phone but if a phone allows for WiFi connectivity there is no way to block that access in public places where WiFi is free (i.e. airports). I had to go with an older (used) phone to find one that did not have WiFi connectivity. We had an old Pantech Laser laying around that worked. Then I had to have AT&T block the data to the phone. FYI for gophones they cannot block this in the store you have to call in and do it over the phone. This was not explained to me and so the first trip with the phone my son was accessing data. I gave AT&T an earful as I had carefully explained I needed data blocked and was told it was done. They credited me the data charges. I am not sure if the AT&T Z222 has WiFi capability or not. In the specs it says it does but the salespeople at the AT&T store says it does not. I had originally tried a $9.99 Tracfone from Walmart and was told that it did not have data access. That information was incorrect.

LDAP (openldap) authorization with DAP (dymamic access policy)

Hello,
We have a asa 5520 and we try to make a ldap (openLdap) authorization with DAP (Dynamic Access Policy). We have problem with logical expression. We need more example of logical expression and we need to know how debug logical expression. We try to use de Debug dap trace and debug dap error but we need more debug informations.

Hi
I guess you are using an ldap attribute map, to map the ad group to a group policy. This does not work as you may expect when the user is part of multiple groups, I.e. the user will always be mapped to the same group (first or last in the list, not sure).
Possible solution : remove the ldap attribute map, and configure dap rules that check the ldap.memberOf attribute instead
Hth
Herbert
Sent from Cisco Technical Support iPad App - sorry for the brief explanation, if you need more details let me know.

I want to install Flash on a computer with no internet access. How do I do this?

I want to install Flash on a computer with no internet access. When I tried to download, I got a message that Flash is already installed. Yes, it is, on my PC. I want it on my laptop, too. How do I accomplish this?

Download the Adobe Flash Player offline FULL installer directly by right clicking one of the following links and selecting "Save target as" (IE), "Save Link As" (FIrefox) or "Download Linked File As" (Safari).
Flash Player 12.0.0.44 for ActiveX (Internet Explorer)
Flash Player 12.0.0.44 Plug-in (All other browsers)
Flash Player 12.0.0.44 (Mac OS X)

Adobe id with no internet access?

I bought Photoshop Elements 12 (in a box) for a friend of mine. She installed it on a computer with no internet access and now the "creat adobe id or your program will quit working" dialog box keeps coming up. How can she keep her program working without an internet connection? I do not appreciate Adobe forcing people who buy physical product to register them online!

She will have to connect the machine to the Internet at least once to activate and log-in with an Adobe ID. It does state on the box that an Internet connection is required to do this. If that is a real problem for her then, depending on where you bought it, you may be able to return it for a full refund.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Updating flash player on a computer with no internet access

I need to update flash player on a computer with no internet access. How can I select to have it downloaded to a flash drive? The download process keeps adding it to the computer I am using, but that is not where the update is needed. What am I doing wrong?

Download the Adobe Flash Player installer directly by clicking one of the following links.
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)

Is there a way to access the web-based setup for my router if I cannot access the internet?

Okay, I need to change the ip address settings on my router. I have a WRT54G Wireless router. I cannot access the internet on my computer connected to the router, and do not know how to change the router settings without accessing the web-based setup page. So, back to my question. Is there a way to access this page if I cannot connect to the internet?

On the back of the router is a small reset switch. Using a paper clip or other small item, press the switch in and hold it for a few seconds. This will reset the router to the default IP address of 192.168.1.1. Enter that address in your web browser, and be sure your computer is attached to the router by an Ethernet cable. Don't attempt to do this using the wireless connection.
Once you have reached the web configuration utility you can change the DHCP settings.
To give your PC a static IP address you will need to open your network connections panel and, assuming your using Windows XP, make the changes from dynamic IP to static there.

WRT54GX4 - Difficulties Accessing the Router's Web-Based Setup Page

WRT54GX4 - Difficulties Accessing the Router's Web-Based Setup Page.
I have tried everything posted to the forums and the Knowledge Base for several weeks now with no luck. I can power push router and gain access to router's web-base interface but only for a few minutes than it quits loading part way through and or does not load at all. If I turn off the wireless side I can access the router at will with no problems. My warranty is almost over. I am at my wits end. I would like to get it replaced under warranty if I can. (^8
Solved!
Go to Solution.

Thank you for your recommendations peanuts. (^8
I bought the router back in December 10, 2006.
I updated the firmware to v1.00.20 back in June 2007. After I did a successful firmware upgrade I reset the router to factory default settings and then reconfigured it. It has worked Ok till a couple of months ago.
I have read everything I can find here on the support forum and in the Knowledge Base several times.
I have tried changing all the different settings to the different recommendations posted here and in Knowledge Base with no success. Each time I would do a long reset back to factory defaults, let it soak for a few hours and then make one change at a time and let it soak.
I have been monitoring 6 other wireless AP(s) around me (none mine) for a couple of months too. None of them are strong enough to connect to. My SSID is different from them. I have tried all the channels. My router is passworded and MAC'd.
It is looking like it is time to call support and try to get a replacement under warranty while it is still in affect.

Need access the E1000's web-based setup page.

I have a Linksys E1000 wireless router, and I seem to have either written down the password incorrectly or am using the wrong one. Regardless, I can not access the web-based setup for the router. Is there anyway to reset the username and password for it?
Solved!
Go to Solution.

Yes, there is. You'll have to reset the router back to defaults, which will reset the password back to the default password for your router. Unfortunately , you'll also have to reconfigure the settings, since all settings go back to factory default. Just hold press the recessed "reset" button for your router for about 30 seconds, then release it. After the router has re-initialized itself, you'll be able to log in to the web GUI again with the default password.

Multiple Server with dedicated Internet access Network

Hello everyone ..
Ok .. keeping it as short as I could ..
Current setup:
2 Dell PowerEdge 2950 Servers Windows Server 2008 R2 each connected to it's own TP-Link router (TL-WR741ND) with static IP for dedicated internet connection ..
Switch:
Cisco Catalyst 2950 switch.
Problems:
1) How to connect both servers to a LAN enabling them to communicat with each other directly regadless of the separate internet access ..
2) How to use USB-Ethernet adapter to re-configure the switch.
Any thoughts are highly appreciated ..

sounds like your dns server has stopped working or your netmask or router setting in your network config changed.
test to see if your dns failed
ping -c 5 8.8.8.8
ping -c 5 google.com
if 8.8.8.8 works, but google.com doesn't - then you have failed dns.
Changing your dns settings can have some consequences - so I can't provife a universal suggestion here.
In general though, your computer should be using itself for DNS (in network settings, dns, it should have 127.0.0.1 as the primary address). And your DNS server should be setup with your server hostname. Run this utility to check.
sudo changeip -checkhostname
Jeff

E1200 V2 with no "internet access policy" in built-in web-based setup

Similar Messages

Maybe you are looking for