E3000 and Fixed IP

I have fixed IP and I just bought an E3000 - the set up works until the device tries to find the internet and can't because I cannot access the device to add the fixed IP address - I have tried logging into the device using 192.168.1.1 and it pops up the login box and then just says Basic Setup in the IE tab and never opens. Any help would be greatly appreciated.
thanks

Try to clear the Browser settings (Delete Cookies, Delete Offline Files,Delete Temp Files) of your IE and then check, If still does not work, then you can try from a different computer or different browser and then see.

Similar Messages

E2000 Slow Down And Fix

I have a 10 mb/s timewarner cable connection thru linksys E2000. I was having an issue of the connection speed limited to 5 mb/s after E2000 wired and wireless. If i take out the router then i get 10 mb/s.
The fix i found is to setup your router without Cisco Connect. Although i wont be about to setup guest accounts anymore, but i get the speed now.
This may or may not work for you. If it does, I assume it would work for E3000 and E4000 also.
PS. All i did was press reset buttom for 30 sec then unplug, wait for another 10 sec and plug back in. Ran setup from web http://192.168.1.1 . done.

You can even try to adjust the slow speed for the connection of wired and wireless both for E2000 through Cisco Connect by the follow steps as well:
If you configured the Router with the help of the Cisco Connect Software then open that up in which you have installed… There you will be able to see 4 small window screens…
You have to click on “Router setting” window…
Then click on “Advanced settings” button… That opens the Router Setup page….
# In the same setup page try to reduce the MTU size to 1400 from Auto… Save Settings…
# Then go to Wireless tab make the changes for the channel –
For Channel Settings of 2.4 GHz you can make Channel Width to 20 MHz only and Channel to 6, 9, 11..
For Channel Settings of 5 GHz you can make Channel Width to 20 MHz only and Channel to 40 or 161...
Then check the speed status….

E3000 and IPAD : No INTERNET

Hi,
I have recently purchase a LINKSYS E3000 and IPAD (Wifi only). The E3000 looks to work good, It works with PC (Vista) Imac, notebook (G-wireless) and also with NAS server and also Samsung TV.
The E3000 is connected with Internet with Cable. All devices have fixed IP address and use two DNS address to get to internet.
No problem there.
But using the IPAD I CAN get connection to other devices, like NAS server, but when I want to go to INTERNET, I get the message NO INTERNET CONNECTION.
I tried several thing, rebooting E3000 and IPAD. Clearing network settings IPAD and entering again. No result.
I tried several wireless setting from the E3000, but without any result, I have NO MAC-address restriction or IP restrictions.
All other device will connect to internet, but the IPAD doesn't.
When connecting the IPAD to the E3000 and looking with the Webinterface to status of the router is discovered something VERY STRANGE:
The statespage (on the right) gives you normally the ip address and DNS of cable internet, but on the IPAD it was EMPTY.
When opening this pages on PC or Imac, it is filled with information. On the IPAD only this page is not completely filled.
HELP?
Solved!
Go to Solution.

What is the Internet IP address on the status page of the router?
You can also access the NAS server that means it is connected to the Local network.
As you have mentioned that when you open the setup page of the router on IPAD, it does not give you any value for Internet Ip address. It is very strange.
All your devices are set to fixed IP addresses.
Do you have any IP address setup on IPAD?
Try to upgrade/re-flash the firmware on the router. Download the latest firmware from Linksys website and upgrade it on your router.
After upgrading the firmware on the router, it is recommended that you should reset the router and reconfigure it. Press and hold the reset button on the router for 30 seconds. Release the reset button and wait for 10 seconds. Power cycle the router and reconfigure it.

How do I Help Apple Care Stop Warring with Each Other and Fix the Problem with My iPhone that They Acknowledge Creating?

How Do I Help Apple US & Apple Europe Stop Warring With Each Other And Fix The Problem They Created?
PROBLEM
Apple will not replace, as promised, the iPhone 5 (A1429 GSM model) that they gave me in London, UK, with an iPhone 5 (A1429 CDMA model).
BACKGROUND
My iPhone 5 (A1429 CDMA model) was purchased this year in September on an existing Verizon Wireless (VZW) line using an upgrade. The purchase took place in California and the product was picked up using Apple Personal Pickup through the Cerritos Apple Retail Store. I will refer to this phone at my "original" phone.
The original phone was taken into the Apple Store Regent Street in London, England, UK on November 15, 2012. The reason for this visit was that my original phone's camera would not focus.
The Apple Store Regent Street verified there was a hardware problem but was unable to replace the part.
The Apple Store Regent Street had me call the US AppleCare. At first they denied support, but then a supervisor, name can be provided upon request, approved the replacement of my original phone with an iPhone 5 (A1429 GSM model) as a temporary solution until I got back in the US. And approved that the GSM model would be replaced with a CDMA model when I came back to the US. I will refer to the GSM model as the "replacement". They gave me the case number --------.
The Apple Store Regent Street gave me the replacement and took the original. The first replacement did not work for reasons I do not understand. They switched out the replacement several times until they got one that worked on the T-Mobile nano SIM card that I had purchased in England, UK. Please refer to the repair IDs below to track the progression of phones given to me at the Apple Store Regent Street:
Repair ID ----------- (Nov 15)
Repair ID ----------- (Nov 16)
Repair ID ----------- (Nov 16)
The following case number was either created in the UK or France between November 15 to November 24. Case number -----------
On November 19, 2012, I went to France and purchased an Orange nano SIM card. The phone would not activate like the first two repair IDs above.
On November 24, 2012, I went to the Apple Store Les Quatre Temps. The Genius told me that my CDMA phone should not have been replaced with a GSM model in the UK and that this was clearly Apple's fault. They had me call the AppleCare UK.
My issue was escalated to a tier 2 UK AppleCare agent. His contact information can be provided upon request. He gave me the case number -----------.
The UK tier 2 agent became upset when he heard that I was calling from France and that the France Apple Store or France AppleCare were not helping me. He told me that my CDMA phone should not have been replaced with a GSM model in the UK and that this was clearly Apple's fault.
The UK tier 2 agent said he was working with engineers to resolve my problem and would call me back the next day on November 25, 2012.
While at the Apple Store Les Quatre Temps, a Genius switched the phone given to from repair ID ----------- with a new one that worked with the French nano SIM card.
Also, while at the Apple Store Les Quatre Temps, I initiated a call with AppleCare US to get assistance because it seems that AppleCare UK was more upset that France was not addressing the issue rather than helping me. I have email correspondance with the AppleCare US representative.
A Genius at the Apple Store Les Quatre Temps switched the replacement with a new GSM model that worked on the French SIM card but would not work if restored, received a software update, or had the SIM card changed. This is the same temporary solution I received from the Apple Store Regent Street in the UK.
By this point, I had spent between 12-14 hours in Apple Store or on the phone with an AppleCare representative.
Upon arriving in the US, I went to my local Apple Store Brea Mall to have the replacement switched with a CDMA model. They could not support me. He told me that my CDMA phone should not have been replaced with a GSM model in the UK and that this was clearly Apple's fault. My instructions were to call AppleCare US again.
My call with AppleCare US was escalated to a Senior Advisor, name can be provided upon request, and they gave me the case number -----------. After being on the phone with him for over an hour, his instructions were to call the Apple Store Regent Street and tell them to review my latest notes. They were to process a refund for a full retail priced iPhone 5 64BG black onto my credit card so that I could use that money to buy a new iPhone 5 64GB black at the Apple Store Brea Mall to reoslve the problem.
The Apple Store Regent Street did not process my refund. He, name can be provided upon request, told me that the AppleCare US did not do a good job reviewing my case, that they were incapable of getting to the bottom of it like they were, and instructed me to call AppleCare US and tell them to review this case number and this repair id. I asked if he read the notes from the AppleCare US Senior Advisor and he would not confirm nor deny. When I offered to give him the case number he accepted but it seemed like would do no good. Our call was disconnected. When I tried calling back the stores automated system was turned on and I could not get back through.
Now I have the full retail price of an iPhone 5 64GB black CDMA on my credit card and Apple will not process the refund as they said they would.
I've, at this point, spent between 14-16 hours at Apple Stores or on the phone with AppleCare representatives, and still do not have the problem resolved.
SOLUTION
AppleCare US and AppleCare Europe need to resolve their internal family issues without further impacting their customers.
Apple is to process a refund to my credit card for the cost of a full retail priced iPhone 5 64GB black.
DESIRED OUTCOMES
I have an iPhone 5 (A1429 CDMA model) that works in the US on VZW as it did before I received the replacement phone in the UK.
Apple covers the cost of the solution because I did not create the problem.
Apple resolves their internal issue without costing me more time, energy, or money.
This becomes a case study for AppleCare so that future customers are not impacted like I have been by their support system.
Does anyone have recommendations for me?
Thank you!
<Edited by Host>

Thanks, but I've been on the phone with AppleCare US (where I am and live) and AppleCare UK. They continue bouncing me back and forth without helping resolve the problem.
Perhaps someones knows how to further escalate the issue at Apple?

Windows Vista, Itunes 10.7, ipod Classic, scan and fix message - why?

I am trying to connect my wife's Ipod Classic to our Windows Vista computer. I get a Scan and Fix Message for the Ipod from Windows. I don't let it scan and click continue. Itunes is frozen and won't recognize the ipod. This has happened since upgrading to Itunes 10.7. Also Itunes is choppy in playing all video content since upgrading to Itunes 10.7.
I have checked system requirements and driver upgrades. So far I have no fix. One site recommended turning off WiFi sync for all devices in Itunes. But of course the device must be connected, and mine won't connect. All my itunes video is languishing. :-(

Wi-Fi sync won't apply since you have an iPod Classic and it doesn't contain any Wi-Fi hardware.
To get rid of the Scan and Fix error, see this page: http://www.yourlocaltech.com/resolve-vista-scan-and-fix-error-when-plugging-in-i pod-or-other-devices/
We'll start there for now.
B-rock

Hi...lags animations in games and messages and album pic..when disable assistive touch,it's true and fix..please release update to fix this in ios 7.1..i need assistive touch and fast game and animation booth!!

Hi...lags animations in games and messages and album pic..when disable assistive touch,it's true and fix..please release update to fix this in ios 7.1..i need assistive touch and fast game and animation booth!!

No Apple here, user to user forum.
I will not be releasing any version of iOS ever.

Purchase Order and Fixed Asset Module.

Hi all,
I want to print my purchase order of fixed asset for record purposes. But the thing, I can't link purchase order or any of A/P documents to my fixed asset.
Meaning, if A/P invoice has been added into the system, it will not update my fixed asset master data.
Therefore, I have to use PO for printing, since there's no way to print Fixed Acquisition as a document. By doing this, i need to maintain both Item Master Data and Fixed Asset Master Data with Fixed Asset items, which i find tedious.
Is there a solution for this, like perhaps there's a way to copy info from PO to FA acquisition, or Posted A/P Invoice that contains Fixed Asset item will be linked to FA Acquisition, or perhaps there's a way to print FA Acquisition (like a PLD) that i am not aware of?
Please do help.
Thanks upfront!
Rgrds,
Kevin
Edited by: Kevin Lau Sieh Huo on May 20, 2008 7:25 AM

Hi Kevin,
I am afraid to inform you that the print layout function is not
supported for Fixed asset transactions such as acquisition.
As you mentioned, if you want to use it as PO document, you will need to create PO in business one since no integration is realized between Purchasing in business one and acquisition in Fixed asset addon.
If you think this will have critical impact on your business process, please post your requirement in our SAP Business One Product Development Collaboration.
/community [original link is broken]
Please refer to SAP Note 1028874
https://service.sap.com/sap/support/notes/1028874
Regards,
Ivy Zhang
SAP Business One Forums Team

Report for Reorder point, safety stock, current stock and fixed lot size

Hi,
Purchasing Dept. is looking for a report which can give list of materials falling below the reorder point, so that they can go ahead and create procurement proposals for those materials.
They also want to see the Reorder Point, Safety Stock, current stock and fixed lot size in the same report.
Let me know if there ia any standard report availbale which displays the same or any approach to get the same.
Thanks in Advance.
Regards,
Shankar Goud.

Hi,
There is no standard report because this is meant to be managed by the MRP run.
The MRP lists show all materials that have a problem (such as stock below reorderpoint) but MRP generates requirements for these anyway and so all you need to do is to look for the MRP generated requirements (requisitions?) and you have your list?
Are you using MRP?
If so then please use the standard functions in MRP to get this.
If not, then WHY NOT?
Steve B

I keep receiving this error every time I open LR, "Lightroom encountered and error when reading from its preview cache and needs to quit" and the app won't open. It said LR would try and fix this error next time I opened it but the error remains. I tried

I keep receiving this error every time I open LR, "Lightroom encountered and error when reading from its preview cache and needs to quit" and the app won't open. It said LR would try and fix this error next time I opened it but the error remains. I tried uninstalled and installing the app and the error remains. I have windows 8. Can anyone please help???

Use Windows Explorer to open the folder containing your catalog. The normal location is Pictures\Lightroom. Locate a folder with the extension .lrdata and delete that folder. Then you should be able to start Lightroom again, and Lightroom will begin building and new previews folder. Do not delete anything else.

My account is locked, i cant remember my security question, and I accidentally entered my itunes card in here instead of my other account, so can someone from apple help me out and fix my account

my account is locked, i cant remember my security question, and I accidentally entered my itunes card in here instead of my other account, so can someone from apple help me out and fix my account (and no, i dont have any rescue email address or whatsoever)
please help me because i dont to waste money for nothing

Alternatives for Help Resetting Security Questions and/or Rescue Mail
     1. If you have a valid rescue email address, then use this procedure:
         Rescue email address and how to reset Apple ID security questions.
     2. Fill out and submit this form. Select the topic, Account Security. You must
         have a Rescue Email to use this option.
     3. This is the only option if you do not already have a valid Rescue Email.
         These are telephone numbers for contacting Apple Support in your country.
         Apple ID- Contacting Apple for help with Apple ID account security. Select
         the appropriate country and call. Ask to speak to the Account Security Team.
     4. Account security issues almost always require you to speak directly to an
         Apple representative to securely establish your identity as the account holder.
         You can set it up so that Apple calls you, either immediately or at a time
         convenient to you.
            1. Go to www.apple.com/support.
            2. Choose Contact Support and click Contact Us.
            3. Choose Other Apple ID Topics and choose the appropriate topic for
                your issue.
            4. Follow the onscreen instructions.
         Note: If you have already forgotten your security questions, then you cannot
         set up a rescue email address in order to reset them. You must set up
         the rescue email address beforehand.
Your Apple ID: Manage My Apple ID.
                        Apple ID- All about Apple ID security questions.

How to find out if Silverlight is disabled in Mozilla's add-ons and fix it so I can insert attachments into my email.

I cannot insert attachments, photos, etc. into my emails in Firefox 4. Windows Live Hotmail solutions had me reinstall Silverlight. It didn't work. They now suggest contacting you to see if Silverlight is being disabled in the add-ons sections of my browser. I can attach files in Explorer but not in Firefox. How do I check to see if Silverlight is being disabled and fix this problem?

Click the Firefox button, go to Add-ons | Plugins. It appears to be enabled already though because your system details show "4.0.60310.0" which is the latest version of Silverlight.

Bug Found and Fix Found Creative ZEN XFI Style 32 Gig

9Bug Found and Fix Found> Creative ZEN XFI Style 32 Gig?Hello I was having problems getting my MP3 TAGS to show up on a number of my MP3's.
Whenever I loaded my files onto my ZEN it would show up as a Voice under Recordings.
And the file name would be "MIC and the date file created etc..."
I noticed that these files where all starting with the letters MIC at the front of the filename...
For instance: Michael_Jackson_Thriller.mp3?? or? Michael_W_Smith_Let_it_rain.mp3
and so on and so on... ANY file that started with the letters M I C? would be thrown in as a voice recorded file and the TAG would not operate.
I have the latest Firmware on my MP3 Player.
The fix was just to change the file name so it did not start with MIC... so i went and switched Michael Jackson to M.Jackson and also switched Michael W Smith to M W smith.
The tag showed up appropriately and I have had no problems since.
It would be nice if there was another Firmware update so that MP3's could start with the letters MIC also I was hoping to bring awareness to this situation for other users.

=Re: Bug Found and Fix Found> Creative ZEN XFI Style 32 Gig?I did three methods of?loading the files.
I used Windows Media Player to sync the files.
I used Creative Central to transfer the files.
These two methods produced results where the file starting with MIC turned into a voice recordings.
I also had problems just copying and pasting the files (using windows explorer).
I have not had any problems with any other file. I normally use MP3Tag to tag my files.
However i even tried using Windows Media to tag the file and I even tried using Creative Central to tag the files.
I tried as many work arounds as possible. But once i renamed the file it worked.

Ipod Classic 160gb keeps getting asked to scan and fix, then freezes

Ipod 160gb classic says that there's an error and would I like to scan and fix it. Either response freezes the message and Itunes, and when reopened won't show my ipod. I've gone into Computer, then right clicked my ipod, choosing properties, then tools, then checked the drive for errors. I've then clicked "automaticlly fix file system errors", and "scan for and attempt recovery of bad sectors" to see it freeze again with either selected. My ipod shows no music, but the memory is still used up. I can't get it on itunes to delte or add any songs. What do I do?

Your iPod filesystem is corrupted, so all your music is in the Others segment, but most of the time, Windows, can't successfully move/ remap the bad cluster. (timeouts?)
Do the iPod disk diagnostic on your iPod, as in this excellent earlier post by tt2.
It wont fix your problem, but help us in troubleshooting.

Vista-scan and fix?

When I connect my 5th Gen ipod to the notebook i get a message from Vista asking whether it wants me to scan and fix my device. I have downloaded the latest MS Vista updates and patches but this still occurs.
Looking on the web I have seen a solution using chkdsk from the command prompt and have tried that as well. It too doesn't work for me. The response I get is that the device is using "RAW" format and that chkdsk is unable to work in this format.
My ipod and itunes are up to date because I had to download the latest version when i purchased this computer and I also update regularly.

I am having the same problem on my not-quite-2-year-old 5th generation. It's combined with an "Unknown Error -69" message that won't let the iPod sync, even though it shows as connected in iTunes. This just started with the update to version 8 iTunes. Today I have spent over three hours trying all the patches, including the Vista ones, but nothing works and NOW when I plug the iPod in (to both my laptop running Vista and my husband's, running XP) it refuses to do anything, saying the iPod is corrupted, and I need to restore. I restore, nothing happens. Basically I have a $300 paper weight - and since I restored, nothing is on it at all now.
I am beyond frustrated - we really can't e-mail or have a live chat with Apple techs? WTH kind of customer service is this?
Has anyone else had this issue? ANY other ideas?

Ipod scan and fix error

I have A 160 gb ipod classic and am using windows 8, I plugged it in this morning and got the "scan and fix" error message and accidentally clicked it and it erased all 5,600 songs I have on ipod. when I go to summary it still shows all the space is still taken up but instead of music files, they're "other" is there a way to fix this?

I am having the same issue with my iPod Shuffle (512MB). I keep hitting No, but is there anything out there to fix this issue? Is there something wrong with my iPod? Please advise.

E3000 and Fixed IP

Similar Messages

Maybe you are looking for