E3200 wireless disappears after a few days

I am using the E3200 in a bridge mode to my uverse wifi router, since the E3200 has 5ghz and my uverse router doesn't. every week or so, I would not be able to detect the E3200 on my Mac Book Pro (I only enabled 5ghz on the E3200), but I can connect to the 2.4ghz uverse router, then access the admin page of the E3200 w/o any problem.
i am running the latest 1.03 version, a router reset fixes the problem.
any ideas?

If the wireless network getting disconnect continuously then try the following settings:
A] With the help of Cisco Connect Software (if at all you have installed the router with the help of this software)
          1] Open the software and go to the option which says "Router Settings"
          2] Then click on the option which says "Advanced Settings" which will take you to the router's configuration page.
         3] Then go to the Wireless tab, keep network mode as mixed,
For Channel Settings of 5 GHz you can make Channel Width to 20 MHz only and Channel to 40 or 161...
B] If you haven't installed Cisco Connect then you can log on to the router's user interface using it's default IP address in the browser which is 192.168.1.1 and type in 'admin' as the password leaving the username field blank. This will take you to the router's web interface and then follow steps as mentioned above to make the changes.

Similar Messages

Why are my notes disappearing after a few days?

I have an I-Phone 5, purchased last March. I have upgraded to IOS 7 when it first came out, no problem. I have been making lists of my packing boxes and they keep disappearing after a few days. I am wondering if sync is wiping them out. Anyone else having a problem with the notes feature?

Yahoo is holding Notes as hostage. Check your Yahoo account settings.

User Profile Services - Sync Connection disappearing after a few days - "Moss MA not found"

Hi,
This may sound like a common problem but i can't seem to find a solution.
I recently installed a SharePoint 2010 farm. The farm is currently SP1, Aug12 CU.
I created the user profile service application without any problems and created a connection, sync worked...everything was fine. Few days after, i noticed the connection disappeared! I tried recreating it but i got the above error. Tried deleting the SA
and recreating it but still the same.
I checked everything:
- FIM services are started
- User profile services (both) are started
- It is not an AD connection timeout (error comes up in a second and containers populate just fine)
- All permissions were given correctly (keep in mind this has worked before)
- Tried updating to the Aug12 CU
Then i remembered i installed the farm with the sql servers mapped with FQDN instead of NETBIOS or Alias.
That led me to try to enable netbios on the SA via PowerShell but to no avail.
So basically my question is...is there anything i can do or is re installing the farm the only solution?

Hi All,
Trevor, L:ooks like your suggestion works I juts tried creating a UPS with the FQDN and then changed to using the NetBIOS name. But the caveat is I am not using the NetBIOS name as the default database, I am using another DB Servet
Whatever we do at this point needs to be tested in DEV so we need DEV Server. I have never seen an environment successfully maintained using the FDQN If it were mr I would have already rebuilt it only takes 90 minutes or so to stand a an environment
up.
Would It would be better to Build another farm next to the first one and remove the content dbs from the old farm and move them to the new one and attaché them to new WebApps. I think it would take less time and be healthier in the long run
to move away from using the FQDN for SQL Completely, I don't believe its supported anyway..
This post from an MSDN Blog is titled NEVER, NEVER, AGAIN. Its just one example.
http://blogs.msdn.com/b/momalek/archive/2010/10/29/never-again-never-use-a-fqdn-for-the-sharepoint-2010-sql-server-name.aspx
I should have said this when I wrote the rename response, its really to attempt the rename or start over... Though Trevor is correct, if you specify the NetBIOS name of the instance when creating the UPS it will work.. Shame I didn't think of it,Trevor
you rock..
Trevor, I would like to get your thoughts as well??? To build another Farm or to continue using the one you have with an FQDN?
-Ivan
Ivan Sanders My LinkedIn Profile,
My Blog,
@iasanders, Business Intelligence in SharePoint 2013.

I keep adding notes to my iphone 5s and they disappear after a few days. However there is 2 notes that have been there since I got my phone in December. I beginning switching back to iphone. 3gs was great but 5s is my mistake...

I added a couple of notes to my iphone 5s when I got it back in December 13. Any other notes added since only last for a few days then disappear. I just opened the notes app and for a split second the note was there I added 3 days ago then it disappeared. I never had this problem with any other phones and I have had both windows and older iphones. It is getting to be a real pain as the notes are essential when I am abroad which is quite frequent. If it cannot be rectified can anybody recommend a decent 'notes' app that I can buy? maybe somthing similar to the one on the windows phones which comes as standard with them but a great app all the same.
Many thanks
Shukt Designs

Sorry to tell you but unless you have a Retail Apple Store close by, they are the only ones I have found with all the adapters and accessories. I bought an extra lightning to usb adapter the other day to use in my truck. Good luck....

HT4970 I've made entries three times over the past several months in Reminders only to have them dissappear after a few days. What am I doing wrong? Any chance they are being saved elsewhere so I can retreive them?

Why do all of my Reminders disappear after a few days? Can I retrieve them?

Why do all of my Reminders disappear after a few days? Can I retrieve them?

I just purchased the new ipad. I set up my email and put show 1000 messages. After a few days my email in my inbox disappears. I have gone thought all the settings. Please help.

I just purchased the new ipad. I set up my email and put show 1000 messages. After a few days my email in my inbox disappears. I have gone thought all the settings. Please help.

iPad Mail
http://www.apple.com/support/ipad/mail/
 Cheers, Tom

I updated to FF4 and after a few days, strange things started happening. How do I recover to normal?

I updated to FF4 and after a few days, strange things started happening.
The groups I had set up disappeared and the Group button is gone.
When I first open the app, it opens 8 - 12 separate windows with 1 blank tab. The orange Firefox button is there with nothing else on that bar. Also, 3 tool bars are blank (i.e. space is there but it's just grey) with NO buttons.
If I want my previously opened tabs, I have to use the "Recently Closed windows" option to get back to where I was when I last closed down. The orange Firefox button is missing from this window but all the original menu items are back across the top.
So how do I get back to the way it is supposed to operate?

Have a look here
Mac maintenance Quick Assist
http://support.apple.com/kb/HT1147

My iPhone 4 with iOS 6 is making me start to hate Apple. Any App and at any time I open and I can not view it or move for more than 2 minutes, they close themselves. During connections, it also gives this problem and the signal disappears after a few seco

My iPhone 4 with iOS 6 is making me start to hate Apple. Any App and at any time I open and I can not view it or move for more than 2 minutes, they close themselves. During connections, it also gives this problem and the signal disappears after a few seconds back but often the person on the other end has hung up ... I can not stand it anymore, someone suggests something?
Besides these problems, there is the battery, which was bad got worse, she is not lasting more than 10 hours, even without using the phone.
Sometimes it even seems that the problem was solved, but my joy did not last long after I celebrate all the problems return, is incredible ...
thanks.
Sorry my bad Inglês.

Try a reset hold home/sleep buttons until Apple logo appears
If that does not improve try a restore
http://support.apple.com/kb/HT4137
For your information
We are NOT Apple here we are all users helping other users
so emotion is ignored

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for the HP driver when i boot up. It also will not save in any print or postscript format. Does anyone know how to fix?
Currently use a Mac with the latest Mavericks 10.9.4

Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport

10g RAC database: instances fail after a few days...

Im afraid I'm new to Oracle, so assume total ignorance when replying!
We have two servers, db1 and db2 running Oracle under Windows 2K3 web edition [SP1].
Both have a shared Direct Attached Storage disk, over a Scsi fibre connection.
The database is set up using instructions found online for RAC.
Either instance will stop, and the other will take over, after a few days. The problem is, we aren't using the database yet. [There isn't a problem with it, the development people have checked that they can use the database.]
The two errors [found using the EM console] which seem to be relevant are:
'Metrics "Database Time Spent Waiting (%)" is at 100 for event class "other"'
and 'Failed to connect to database instance ... TNS no listener'.
[Which is obvioulsly the failure]
I have scoured the web, and the rather dense reference books for Oracle I have access to, and to no avail.
Another contributing factor is the 'WMI Performance Adaptor' stops and starts on both machines every thirty seconds.
Any response/guidlines/advise would be greatly appreciated.
Apologies if I have started this thread in the wrong place!
James
Spelling errors - Message was edited by: jmorse

Tada, it failed at 4am last night.
Below is the bottom half of the log file.
2005-09-05 15:27:57.796: Attempting to start `ora.gandlake-db2.ASM2.asm` on member `gandlake-db2`
2005-09-05 15:28:04.703: Start of `ora.gandlake-db2.ASM2.asm` on member `gandlake-db2` succeeded.
2005-09-05 15:28:04.921: Attempting to start `ora.x200.x2002.inst` on member `gandlake-db2`
2005-09-05 15:28:33.359: Start of `ora.x200.x2002.inst` on member `gandlake-db2` succeeded.
2005-09-05 15:28:40.578: Start of `ora.x200.x2001.inst` on member `gandlake-db1` succeeded.
2005-09-05 15:28:40.609: CRS Daemon Started.
2005-09-05 15:28:41.140: Attempting to start >`ora.gandlake-db1.LISTENER_GANDLAKE-DB1.lsnr` on member `gandlake-db1`
2005-09-05 15:30:06.078: Start of `ora.gandlake-db1.LISTENER_GANDLAKE-DB1.lsnr` on member `gandlake-db1` succeeded.
`ora.gandlake-db1.vip` on `gandlake-db1` went OFFLINE unexpectedly
2005-09-06 19:48:35.703: Attempting to stop `ora.gandlake-db1.vip` on member `gandlake-db1`
2005-09-06 19:48:36.250: Stop of `ora.gandlake-db1.vip` on member `gandlake-db1` succeeded.
Restarting `ora.gandlake-db1.vip` on `gandlake-db1`
2005-09-06 19:48:36.312: Attempting to start `ora.gandlake-db1.vip` on member `gandlake-db1`
2005-09-06 19:48:38.843: Start of `ora.gandlake-db1.vip` on member `gandlake-db1` succeeded.
Successfully restarted `ora.gandlake-db1.vip` on `gandlake-db1`
`ora.gandlake-db1.ons` on `gandlake-db1` went OFFLINE unexpectedly
2005-09-06 22:59:36.875: Attempting to stop `ora.gandlake-db1.ons` on member `gandlake-db1`
2005-09-06 22:59:38.218: Stop of `ora.gandlake-db1.ons` on member `gandlake-db1` succeeded.
Restarting `ora.gandlake-db1.ons` on `gandlake-db1`
2005-09-06 22:59:38.296: Attempting to start `ora.gandlake-db1.ons` on member `gandlake-db1`
2005-09-06 22:59:40.109: Start of `ora.gandlake-db1.ons` on member `gandlake-db1` succeeded.
Successfully restarted `ora.gandlake-db1.ons` on `gandlake-db1`
`ora.gandlake-db1.vip` on `gandlake-db1` went OFFLINE unexpectedly
2005-09-08 04:47:35.078: Attempting to stop `ora.gandlake-db1.vip` on member `gandlake-db1`
2005-09-08 04:47:35.734: Stop of `ora.gandlake-db1.vip` on member `gandlake-db1` succeeded.
`ora.gandlake-db1.vip` ran out of restarts on `gandlake-db1`
`ora.gandlake-db1.vip` failed on `gandlake-db1`, relocating.
2005-09-08 04:47:35.875: Attempting to stop `ora.gandlake-db1.LISTENER_GANDLAKE-DB1.lsnr` on member `gandlake-db1`
2005-09-08 04:47:36.718: Stop of `ora.gandlake-db1.LISTENER_GANDLAKE-DB1.lsnr` on member `gandlake-db1` succeeded.
2005-09-08 04:47:36.765: Attempting to stop `ora.gandlake-db1.ASM1.asm` on member `gandlake-db1`
2005-09-08 04:47:37.390: [RUNNABLELISTENER:4648] state change aborted (locked): ora.x200.x2001.inst
2005-09-08 04:47:44.578: Stop of `ora.gandlake-db1.ASM1.asm` on member `gandlake-db1` succeeded.
2005-09-08 04:47:44.625: Attempting to stop `ora.x200.x2001.inst` on member `gandlake-db1`
2005-09-08 04:47:46.531: Stop of `ora.x200.x2001.inst` on member `gandlake-db1` succeeded.
2005-09-08 04:47:46.625: Attempting to start `ora.gandlake-db1.vip` on member `gandlake-db2`
2005-09-08 04:47:50.203: Start of `ora.gandlake-db1.vip` on member `gandlake-db2` succeeded.x200 is the name of the database, there are two instances in total, db1 and db2. The company name is 'gandlake', and the machines are called 'gandlake-db1' and 'gandlake-db2'.
Thanks again.

HT3964 I just opened up my MacBook Pro after a few days of not using it and it was frozen. I turned it off and back on and all I see is a white screen, there was a file with a question mark flashing for a bit but I can't do anything, please help me!!

I just opened up my MacBook Pro after a few days of not using it and it was frozen. I turned it off and back on and all I see is a white screen, there was a file with a question mark flashing for a bit but I can't do anything, please help me!!

Jerricayoung,
you have a 13-inch Mid 2012 MacBook Pro. It’s modern enough that it supports booting into Recovery mode. To do so, hold down a Command key and the R key as you start up. It should eventually show a Mac OS X Utilities menu. Select Disk Utility from that menu; when the Disk Utility window appears, select the bootable volume from the left-hand side of the window. (It’s typically called “Macintosh HD”.) When the volume is selected, some buttons will appear on the right-hand side. If it’s not greyed out, press the Verify Disk button; if it is greyed out, or if it reports on errors that it found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu; that will restart your MacBook Pro in its normal mode. With luck, that will be enough to get you to your normal login screen, rather than the white screen.

Devices appear in itunes after loading then disappear after a few minutes. How do I rediscover my devices?

My devices all disappear after a few minutes. How do I rediscover them?

You may have a bad track pad sensor.
http://blog.w3conversions.com/2006/04/faulty-trackpad-sensor-in-powerbook/
Do NOT open the computer and detach the sensor. There’s no reason to. Here is the complete method for disabling the sensor:
Move (do not delete) the following extensions to a different location (a new folder outside the extensions folder). You’ll find them in your system/extensions folder:
* IOI2CControllerPMU.kext
* IOI2CLM7x.kext
* AppleLM7x.kext
* Extensions.kextcache
* Extensions.mkext
Once moved, restart, and that little sensor will be disabled.

My macbook pro shut off for a few days now after a few days that i tried turning it on it finally turned on its been doing this often what might be the problem?

So my macbook pro turns off and i try to turn it on but it wont turn on then after a few days it turns back on. its been doing this alot sometimes it turns on after a few days sometimes it turns on after a few hours but i dont know what might be wrong

Hi oscarqwolf,
I'm sorry to hear you are having these issues with your MacBook Pro. If you are having intermittent but persistent power or startup issues with your Mac, you may find the troubleshooting steps outlined in the following article helpful:
If your Mac won't turn on - Apple Support
Regards,
- Brenden

Just downloaded OS X Lion. Now, there's no curser bar to scroll up or down for any of the pages I access....if I use the keyboard arrows for up/down, there is a temporary scroll bar, however it disappears after a few moments. Help!!

Just downloaded OS X Lion. Now, there's no curser bar to scroll up or down for any of the pages I access....if I use the keyboard arrows for up/down, there is a temporary scroll bar, however it disappears after a few moments. Help!!

Go to System Preferences->General. There you can set how you wamt thescrool bars to behave.
If you want to see the scrool bars all the time select Always

Purchased music skips after a few days

My iPod skips my iTunes' purchased music after a few days. When I connect my iPod to the iMac again the songs are back on my iPod but only for a couple of days.
Can some of you help me out to solve this problem?

The same thing happens to me, and unfortunately, it almost always seems to happen at the worst times (getting on a long plane flight.)
I've done a lot of research on this topic in the Apple Discussions groups, and have tried all the suggested remedies:
(1) Re-setting ipod
(2) Re-loading music
(3) Updating firmware, software
Net/net, when you update your iPod, and connect to iTunes, or do any of above, it will work for a little while, and then it will just start skipping purchased music again.
I believe this must be result of defective players, or bug in some of players, as not everyone has this problem (my wife's works fine) - but based on number of comments re. this problem I see on this forum, many people do, and Apple should offer exchange.

E3200 wireless disappears after a few days

Similar Messages

Maybe you are looking for