E4200 messing with my connection

I have owned this E4200 for about a year now, and just now have run into an issue. The router seems to be messing with my connection. My internet provider gives me 15 MB/s and I get it when I connect straight to my modem. When I connect the router up, it starts to fluctuate around the 0.5-4MB/s. I checked with the provider and everything is ok so long as I don't connect to the router itself.
Any help?

This could definitely be a firmware issue. If your setup hasn't been modified (modem upgrade?) and your subscription hasn't been upgraded (faster speeds) then there shouldn't be any issues. Minor bugs could causing the router to perform poorly. Get the latest firmware from the E4200 Support Page. Upgrade to this latest version then reset and reconfigure the router. This should fix your router's connectivity issues.

Similar Messages

My sibling was messing with my ipod, trying to figure out my passcode. Now they have disabled it. I tried connecting it to itunes, but that didn't work becuase it kept telling me to enter my passcode. Anyone know how to fix a disabled ipod touch?

My sibling was messing with my ipod touch and trying to figure out my passcode. Now it is disabled. I tried connecting it to Itunes, but that didn't work. Itunes kept telling me to enter my passocode. Any suggestions?

omg the sixth time i did it it worked jeeej
thank you very much guys <3 xD

Mess with accounts in OneNote and OneDrive for Business - can't open documents from Office 365

Hello!
[Reposted from
here]
I've got Office 365 subscription (E3) with Office.
I can view and edit OneNote notebooks on Office 365 via browser, but can't open it in OneNote.
The similar problem exists for OneDrive for Business - some libraries are syncing, some cannot - asking for Enter credentials, but when I click - nothing happens.
There were two accounts bound to Office 2013 - personal Microsoft ID as primary account and corporate Office 365 linked to it.
Windows 8.1 corporate profile is linked to Microsoft ID account as well.
Something happen with these accounts after password was changed - it seems like some account information was cached and can't be cleaned.
I tried to uninstall Office and install it - no success.
I cleaned computer with
this utility from Support - no luck.
On other Windows 8.1 computer I created new profile (with Microsoft ID account) - surprise, there are problems there as well.
I deleted all Office15 entries from Credentials Manager - Office asked me about Office 365 login/password - I entered them, it is syncing, Haliluja, but, when Microsoft ID account was linked to Office 365 account in Office - problem appears again.
It seems that Office 2013 uses Microsoft ID credentials for Office 365 content.
I'd like to use Microsoft ID as primary account for Office and link Office 365 account to it, but don't want such problems. It worked fine, but I don't know what happened and how it can be analyzed and fixed.
Update: It seems I localized the problem, but still don't know the solution.
Scenario to reproduce error for me:
1. Create fresh new Corporate/Domain user profile on Windows 8.1 with Office Pro 365 installed on computer with latest updates
2. Go to SharePoint Online and browse some Libraries and OneNote notebooks - all ok
3. Start to sync them using OneNote and OneDrive for Business - ok
4. Link Microsoft Account with Corporate Account in Windows 8.1 - ok
5. Syncing of _some_ (not all) Office 365 libraries and notebooks stop working - errors with access, permissions. I'm trying to enter credentials but this doesn't help
6. Disconnect Microsoft Account and Reboot - all libraries and notebooks of Office 365 work fine again. But OneNote notebooks from OneDrive stop working :)
How I can fix this situation and have Microsoft and Corporate account connected?

Update 2:
I installed PowerShell for SharePoint online cmdlets and found this user using get-SPOUser.
I removed this user using remove-SPOUser -site
https://mysitename.sharepoint.com -LoginName
[email protected]
but when I'm trying to access sharepoint from the browser with Microsoft account credentials - new record for this user is created again and I can see it with get-SPOUser :(
So, problem is still not solved - this user is still can be authenticated (there is no such user in SharePoint site collection, there is no such user profile) and Office 2013 syncing doesn't work for Office 365 due this mess with accounts.
I know that I can remove Sharing with external users from Site Collection and information about these users will be permanently deleted - but I don't want to do this, there are several customers who work with our documents.

My itunes keeps crashing every time i open it with my windows 7. im active military and dont have time to be messing with this. please help

my itunes keeps crashing every time i open it with my windows 7. im active military and dont have time to be messing with this. please help

Hello there, Staver13.
The following Knowledge Base article provides some assistance in troubleshooting your issue:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Particularly:
Troubleshoot issues on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
Note: Time Zone may list another city in your time zone.
Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Try resetting (turning off and then on again) your Wi-Fi router.
If the issue persists, try troubleshooting your Wi-Fi networks and connections.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

!!! Statements of Logic Deleting Files and messing with System are True !!!

This morning I answered some guys post about Logic deleting everything in the same level as the project folder under certain circumstances. I Tried trouble shooting for him but could not recreate it.
Then this happened to me today:
When working in Logic 8 in Leopard all of a sudden it stopped communicating with my Unitor8 via USB. I restarted but the Unitor 8 Which I reset twice would NOT communicate with L8 anymore. It would remain in patch mode (red light lit though CPU is running)
I've had this erratic behavior many times since the past years on many computers so it wasn't really new. All one needs to do is reinstall the Unitor Family driver.
So I decided to do so:
I inserted my Logic Studio DVD and opened the installer and checked ONLY the Unitor family Drivers. After completed install I restarted the Mac. Everything went fine. So I booted L8. While booting I saw my hardrives on the right side of the desktop flash once. I thought that to be strange and took closer look.
Now my boot drive was missing from all the drives on the desktop and in the sidebar window...
I tried to Apple+Click on a Application in the dock. The finder opened the applications folder and showed me the app I had clicked on. But I could not navigate to the root of my System Drive even via the "path" sysmbol in the toolbar. So I hit shiftappleg and entered /Volumes/MySystemVolume - it showed my volume "Grayed Out" in the finder window...
I tried repairing the disk and permissions but nothing was wrong with my boot drive apparently besides the fact that the finder (and all other applications when wanting to open or save) could not "see" my system drive... I could launch all the apps normally that were residing on the SystemDrive in the AppFolder... So this kept getting weirder...
So I opened my favorite application Tinkertool System and went to the Tab Files and chose the underlying tab "Attributes" which shows me Macintosh HFS and Finder Attributes... I pulled my SystemDrive onto the Drop Area and discovered something VERY amazing: The Display in Finder option had mysteriously been altered to "INVISIBLE"
I changed it to Visible and there it was - My System Drive... Showing up in the finder...
I made a restart to make sure everything was OK....
After the restart the following settings had VANISHED:
1) Pixadex = ALL ICONS (I had 230 MB) of sorted icons stored in my Application Support Folder
2) All my Safari Book marks were gone - They were still in ~/Library/Safari - but the Bookmarks.plist was UNREADABLE even with a text editor and XML editor
3) Numerous other applications had LOST their authorization preferences so I had to re-authorize many of my Audio Unit plug-ins...
4) My Dock had been reset
5) My Monitor arrangement had been reset...
6) My date and time had been reset
7) My energy settings had been reset.... (I had NOT zapped the P-RAM)
Since installing Leopard 2 weeks ago - I have CAREFULLY monitored ANY activity after INSTALLING anything in order to be able to troubleshoot - and this problem definitely occurred right after installing the USB Family Drivers and launching L8....
There was really NO HARM done other than the sweating that I did troubleshooting but if L8 is capable of doing what happened to this other guy loosing his whole folder and now doing this to me - where are the limits? When is someone going to get REAL hurt.
Please Apple - I am sending you this post as a BUG report as well - could you PLEASE look into this as there has to be some kind of VERY dangerous MALFUNCTION within Logic or its Installers.

Wow, I was just joking with the medication thing. I didn't actually think it was seriously a mental health issue. Sorry.
In any case, though, if he has full access to the Mac, mental health issues or no, there's not a whole lot to do about it. If it is possible to take away administrative privileges without causing a huge fuss, then you can limit his access to certain things. However, you can't mess with privileges on a Time Machine backup (doing so breaks it), and that means he's going to have access to at least parts of the backup. Which means he can trash at least some of the backup data, and if he deletes files from the TM backup using the Finder, he'll have essentially trashed the whole backup. He might as well have the ability to delete all the files on the machine if he has the power to delete backups.
Honestly, in this situation, he should either only be allowed to use an account with Parental Controls on, which may not be an option (I don't know how offended he would be at such a suggestion), or he should be using a different computer entirely and have no access at all to his wife's computer. Alternately, have his wife keep a backup that is hidden - ie, connect the backup drive periodically and then remove it and hide it so he can't mess with it. That will at least secure the backup.

MacBook Messes with my Monitor

Hi,
I'm new to Mac, and this is really wierd.
I'm hooking up a 19inch BenQ monitor to my MacBook via a VGA adaptor I bought with the MacBook Pro.
It detected the external monitor immediately, wonderful. After several hours, however, the monitor went dark. If I unplugged it, and plugged it back in, I'd catch a glimpse of screen, before it went dark again.
I tried plugging the external monitor back into a Windows machine, and had *the same* symptoms!
After unplugging the mains from the monitor and waiting 30secs, I could reconnect it to the mac and everything was fine again.
However, this problem keeps repeating! Somehow the Mac is messing with the monitor, causing it to go dark until I completely unplug it from the mains, allow it some time to loose all it's state, and plug it back in.
What on earth is happening?

I've got a bit closer to the root cause.
If I leave the MBP alone for about half an hour and it shuts down the displays, the external monitor flickers back into life for a moment then goes black (although it's LED still shows it's connected).
After that, nothing but unplugging it from the mains will help.
My god, what bad experience I'm having with Macs so far... over heating, short cuts not working, monitors ceasing to function properly... it's hardly what I expected after shelling out three times as much as I would have for a windoze/linux machine!

How can i mess with people using my wifi?

my airport express is wpa2 and passworded. my neighbors are still using it and hacking it. yes im sure. a buddy said something about viewing the DHCP or something and you can see computers connected.
i heard of one guy hacking with scripts. where he has one unsecure network and one secure and one of them automatically redirects their pages to kittenwar.
soo how can i set that up step by step?
or what can i do to mess with them or get them off?
can i control or shut down their computer with the connection?
i could understand them stealing it if it was not passworded. but it is so this means war haha

The neighbors are pulling your leg unless you have given them the password for your network, or you are using a password that is easy to guess.
It is a good idea to change your password as well from time to time. Choose a password that is a mix of random numbers and letters.
i heard of one guy hacking with scripts. where he has one unsecure network and one secure and one of them automatically redirects their pages to kittenwar.
soo how can i set that up step by step?
Providing information like this is a violation of the terms of use agreement that we all signed for this support area.

I had an iPhone 4 and recently upgraded to iphone5 now iCloud will not back up new phone. Under iCloud it shows 2 iPhones and my iPad. Is it trying to write new phone over the old one? What should I do? I a, afraid I might lose everything messing with

I had an iPhone 4 and recently upgraded to iphone5 now iCloud will not back up new phone. Under iCloud it shows 2 iPhones and my iPad. Is it trying to write new phone over the old one? What should I do? I am afraid I might lose everything messing with

I see. If you go to Settings>General>About>Name, that is the current name of your phone. The backup bearing that name should be the more recent one, and therefore the one you want to keep. I would delete the other one (presumably the one set up by Best Buy under your real name, assuming you changed it later), then see if that gives you enough space to back up again.
If it still reporting insufficient storage, use this guide: http://support.apple.com/kb/HT4847 to try to determine what's taking up all your room. In them meantime, you can perform a manual backup on your computer so your have a current one while you're troubleshooting this. To do so, connect your phone to iTunes, then right-click on the name of your phone on the left side and select Back Up.

Is someone messing with me, or are things just screwed up?

yesterday fonts were not connecting in apps. today, pdf presets went away, disk utility not showing the same mounted drives as the finder, ect. ect. Is someone maliciously messing with my computer or are things just breaking all of the time?
no one here can fiddle with macs, and AI is not present.

Well, of course it did. Not only did you revert to an older system that doesn't have problems with whatever older software you're using, but you erased the hard drive and reinstalled the system, wiping out any possible issues caused by system corruption. In the absence of any troubleshooting, that doesn't tell you anything about Mountain Lion.
At some point in the future, you will have to upgrade. When you do, you will have more success if you do the following:
1) Check all your software for compatibility with the new system.
2) Repair the hard drive with Disk Utility.
3) Make a full backup of your whole system using Time Machine.
4) Ideally, make a second full backup of your whole system using something else, like Carbon Copy Cloner. (I consider two backups to be the minimum.)
5) Wait until you have time to deal with any possible problems that crop up.
6) Install the upgrade.
Some people recommend erasing your hard drive and installing the new system "cleanly." That certainly helps ensure that you don't have any problems with the new system, but is often unnecessary. I prefer to save clean installs for when they are actually necessary, but that is only an opinion. You can certainly choose to do a clean install if you prefer.

Upgrading raid firmware messes with drive data?

I need to upgrade both 1.5.0 controllers on one of my x raid so that later I can use then on a second x raid with 750gb drives. the second x raid is having lots of problems losing connection to a xserver and I need to pinpoint to see if it is a controller problem.
the question is. upgrading the 1.5.0 controllers to 1.5.1 messes with the data and settings on a simple raid5 on both sides of the raid storage? I don't have the time and mainly space to backup the data.
thanks.
Nuno

No upgrading the controller firmware doesn't affect the drives/arrays or data.
That's not to say you shouldn't have a viable backup of your data, but it's not a prerequesite for updating the firmware. :)

Problem with JCo Connection Pool

Hi,
I have a problem with using an RFC Model in my WebApplication. So sometimes the access to the function block works, and sometimes it doesn't work. Now I know, that there is a problem with the connection pool. Look at this message:
com.sap.mw.jco.JCO$Exception: (106) JCO_ERROR_RESOURCE: Connection pool WD_X24_MODELDATA_DEST_CPIC_REKTO_DE_useDefinedUser is exhausted. The current pool size limit (max connections) is 10 connections.
So it looks like a problem with closing the JCo Connections after using. Do know where the problem is? Because I'm using many other function blocks with no problems.

Hello,
You need to increase the pool size via Visual Administrator.
Server 0 -> Services -> JCO RFC Connections.
Change the pool size from there. I believe a restart is in order.
Regards,
Jan

Problems with ipod connection.

Problems with ipod connection.
I have problems to connect my ipod to computer windows 7.
When I connect I get the following error:
"We encountered an ipod, but could not be identified correctly. Disconnect and reconnect the ipod and try again."
And it recognizes the ipod when trying to go play music or videos make me the following error:
"Error while trying to copy on disk. The device is not connected."
I've uninstalled all apple applications and re-installing, as I formatted the ipod and continues to set the same error.
What else can I do?

Hello,
While your symptoms don't exactly match the descriotion, this article may be usefull in discovering if there is a setting on your computer that is causing this to happen.
iPod not recognized in 'My Computer' and in iTunes for Windows
http://support.apple.com/kb/ts1369
-Griff W.

Problems with SSH: Connection Refused

Greetings fellow Arch users,
I have hit a bit of a snag that I could really use some extra help getting around. I've tried everything I can think of (and everything that Google thought might work) and I have my back rather against a wall, so I thought I'd come here to see if anyone can offer some advice.
To make a long story short, I am a college student and am attempting to set up an ssh server on a desktop at my house so I can access it remotely from the college. I have the computer set up and the server running, however I am having difficulty making connections to it from my laptop. I know that the server is running, because I can log into it both from the server itself (sshing into local host) and from my laptop when I use the internal IP address.
The server is on a static IP address within the network(192.168.0.75), and my router is configured to forward TCP port 1500 to it (I'm using 1500 as the port for my ssh server). However, when I attempt to log into the ssh server using my network's external IP address, the connection is refused. I used nmap to scan my network and found that, even though the proper ports are forwarded to the proper place as far as my Router's configuration interface is concerned, port 1500 is not listed as one of the open TCP ports. I also, to test it, temporarily disabled the firewalls on both the server and the client. That didn't help. The command that I am running is:
ssh -p 1500 douglas@[external ip address
As I am really not sure what is causing this problem, I don't know what information to provide. So here is everything that my inexperienced mind sees as likely being important. If you need anything more, let me know and I will do my best to provide it.
Here is the sshd_config file from my server.
# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.
# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin
# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented. Uncommented options override the
# default value.
Port 1500
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::
# The default requires explicit activation of protocol 1
#Protocol 2
# HostKey for protocol version 1
#HostKey /etc/ssh/ssh_host_key
# HostKeys for protocol version 2
#HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_dsa_key
#HostKey /etc/ssh/ssh_host_ecdsa_key
# Lifetime and size of ephemeral version 1 server key
#KeyRegenerationInterval 1h
#ServerKeyBits 1024
# Ciphers and keying
#RekeyLimit default none
# Logging
# obsoletes QuietMode and FascistLogging
#SyslogFacility AUTH
#LogLevel INFO
# Authentication:
#LoginGraceTime 2m
PermitRootLogin no
#StrictModes yes
#MaxAuthTries 6
#MaxSessions 10
#RSAAuthentication yes
#PubkeyAuthentication yes
# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
# but this is overridden so installations will only check .ssh/authorized_keys
AuthorizedKeysFile .ssh/authorized_keys
#AuthorizedPrincipalsFile none
#AuthorizedKeysCommand none
#AuthorizedKeysCommandUser nobody
# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#RhostsRSAAuthentication no
# similar for protocol version 2
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# RhostsRSAAuthentication and HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes
# To disable tunneled clear text passwords, change to no here!
#PasswordAuthentication yes
#PermitEmptyPasswords no
# Change to no to disable s/key passwords
ChallengeResponseAuthentication no
# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no
# GSSAPI options
#GSSAPIAuthentication no
#GSSAPICleanupCredentials yes
# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the ChallengeResponseAuthentication and
# PasswordAuthentication. Depending on your PAM configuration,
# PAM authentication via ChallengeResponseAuthentication may bypass
# the setting of "PermitRootLogin without-password".
# If you just want the PAM account and session checks to run without
# PAM authentication, then enable this but set PasswordAuthentication
# and ChallengeResponseAuthentication to 'no'.
UsePAM yes
#AllowAgentForwarding yes
#AllowTcpForwarding yes
#GatewayPorts no
#X11Forwarding no
#X11DisplayOffset 10
#X11UseLocalhost yes
PrintMotd no # pam does that
#PrintLastLog yes
#TCPKeepAlive yes
#UseLogin no
UsePrivilegeSeparation sandbox # Default for new installations.
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
#UseDNS yes
#PidFile /run/sshd.pid
#MaxStartups 10:30:100
#PermitTunnel no
#ChrootDirectory none
#VersionAddendum none
# no default banner path
#Banner none
# override default of no subsystems
Subsystem sftp /usr/lib/ssh/sftp-server
# Example of overriding settings on a per-user basis
#Match User anoncvs
# X11Forwarding no
# AllowTcpForwarding no
# ForceCommand cvs server
The ouptut of ip addr when run on the server:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp8s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 00:21:9b:3a:be:94 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.75/24 brd 192.168.255.0 scope global enp8s0
valid_lft forever preferred_lft forever
inet6 fe80::221:9bff:fe3a:be94/64 scope link
valid_lft forever preferred_lft forever
Here is the output from running nmap on the network:
Starting Nmap 6.40 ( http://nmap.org ) at 2013-09-28 21:05 EDT
Initiating Ping Scan at 21:05
Scanning address [2 ports]
Completed Ping Scan at 21:05, 0.01s elapsed (1 total hosts)
Initiating Parallel DNS resolution of 1 host. at 21:05
Completed Parallel DNS resolution of 1 host. at 21:05, 0.05s elapsed
Initiating Connect Scan at 21:05
Scanning pa-addresss.dhcp.embarqhsd.net (address) [1000 ports]
Discovered open port 80/tcp on address
Discovered open port 443/tcp on address
Discovered open port 23/tcp on address
Discovered open port 21/tcp on address
Completed Connect Scan at 21:05, 4.08s elapsed (1000 total ports)
Nmap scan report for pa-address.dhcp.embarqhsd.net (address)
Host is up (0.036s latency).
Not shown: 995 closed ports
PORT STATE SERVICE
21/tcp open ftp
23/tcp open telnet
80/tcp open http
443/tcp open https
8080/tcp filtered http-proxy
Read data files from: /usr/bin/../share/nmap
Nmap done: 1 IP address (1 host up) scanned in 4.19 seconds
Here is the ssh_config client-side:
# $OpenBSD: ssh_config,v 1.27 2013/05/16 02:00:34 dtucker Exp $
# This is the ssh client system-wide configuration file. See
# ssh_config(5) for more information. This file provides defaults for
# users, and the values can be changed in per-user configuration files
# or on the command line.
# Configuration data is parsed as follows:
# 1. command line options
# 2. user-specific file
# 3. system-wide file
# Any configuration value is only changed the first time it is set.
# Thus, host-specific definitions should be at the beginning of the
# configuration file, and defaults at the end.
# Site-wide defaults for some commonly used options. For a comprehensive
# list of available options, their meanings and defaults, please see the
# ssh_config(5) man page.
# Host *
# ForwardAgent no
# ForwardX11 no
# RhostsRSAAuthentication no
# RSAAuthentication yes
# PasswordAuthentication yes
# HostbasedAuthentication no
# GSSAPIAuthentication no
# GSSAPIDelegateCredentials no
# BatchMode no
# CheckHostIP yes
# AddressFamily any
# ConnectTimeout 0
# StrictHostKeyChecking ask
# IdentityFile ~/.ssh/identity
# IdentityFile ~/.ssh/id_rsa
# IdentityFile ~/.ssh/id_dsa
# Port 22
Protocol 2
# Cipher 3des
# Ciphers aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc
# MACs hmac-md5,hmac-sha1,[email protected],hmac-ripemd160
# EscapeChar ~
# Tunnel no
# TunnelDevice any:any
# PermitLocalCommand no
# VisualHostKey no
# ProxyCommand ssh -q -W %h:%p gateway.example.com
# RekeyLimit 1G 1h
Output of ssh -v during connection attempt:
OpenSSH_6.3, OpenSSL 1.0.1e 11 Feb 2013
debug1: Reading configuration data /home/douglas/.ssh/config
debug1: Reading configuration data /etc/ssh/ssh_config
debug2: ssh_connect: needpriv 0
debug1: Connecting to address [address] port 1500.
debug1: connect to address address port 1500: Connection refused
ssh: connect to host address port 1500: Connection refused
Thank you guys ahead of time. Getting this server operational is hardly critical, it is just a side project of mine, but I would really like to see it working.
Douglas Bahr Rumbaugh
Last edited by douglasr (2013-09-29 02:58:56)

Okay, so I finally have the opportunity to try and log in from a remote network. And. . . it doesn't work. Which is just my luck because I now need to wait an entire week, at least, before I can touch the server again. Anyway, running ssh with the maximum verbosity I get this output:
douglas ~ $ ssh -vvv -p 2000 address
OpenSSH_6.3, OpenSSL 1.0.1e 11 Feb 2013
debug1: Reading configuration data /home/douglas/.ssh/config
debug1: Reading configuration data /etc/ssh/ssh_config
debug2: ssh_connect: needpriv 0
debug1: Connecting to address [address] port 2000.
debug1: connect to address address port 2000: Connection timed out
ssh: connect to host address port 2000: Connection timed out
It takes a minute or two for the command to finish with the connection timeout, as one would expect. And yes, I am reasonably sure that the address that I am using is my home network's external IP. It is dynamic, but I checked it before I left which was just over an hour ago. I guess that it may have changed. I'll know that for sure in the morning, when my server sends me an automatic email with the network's current address. In the meantime I am operating under the assumption that the address I am using is correct. What else could be the problem?

Not the average problem with wireless connection. Please help me..

I've been having wireless connection problems ever since I upgraded to Verizon FiOS from Verizon Wireless. Before upgrading to Verizon FiOS in the fall of 2012, my brother's laptop connected just fine with the connection. After upgrading to Verizon FiOS, my brother's laptop could not connect to the internet. It showed the wireless connection signal as Excellent, but I could not access the internet. Either it would be extremely slow or there would be no connection at all. Also, the router would sometimes restart itself randomly, and it was extremely annoying for me since I am hardwired with my desktop.
This was weird because my iPod Touch connected perfectly fine to the wifi. So I thought it must be the laptop. But I brought the laptop over to my cousin's house, who also happens to have Verizon FiOS, and the laptop connected perfectly fine. I called Verizon and none of the technicians knew what the problem was. We tried disabling and enabling the router, changing the channels, and anything that was on the list. They couldn't help me and I was extremely disappointed because not only am I not accessing the internet with my brother's laptop, but I am also paying for the service too. The last technician I called in 2012 decided to send me a new router. I hoped this would work, but it did not. This router, too, would completely reset itself numerous times before settling down and letting me use the internet.
I gave up after that. But in the spring of 2013, I got really fed up with the service I was receiving and I decided to call Verizon again. Again, Verizon tried to help me fix the laptop with their tools and solution guides. But nothing good came out of it, so I decided to ask for a technician to come to my apartment to fix it. We scheduled a day and I was pretty excited since I was almost positive that the connection for the laptop would be fine by then.
I was wrong. The technician came and only stayed for about 20 minutes. He said it must be the laptop or it must be that the walls are too thick in my apartment. But that can't be it since, in my cousin's house, the router is on the second floor and my brother was using his laptop on the first floor. So it couldn't be the laptop nor the house. So we came to no conclusion. He just attached a mini router to the laptop and hardwired it. I wasn't so content but I was glad my brother could finally use the internet now.
About three months pass by and I decide to get myself a new laptop. I get it and I am hoping the wireless connection works. It did, so I was almost positive that it was my brother's laptop that was the problem, not the wireless signal. I go on vacation for a few days and I connect perfectly fine at my friend's house. When I return home and try to connect to my wireless connection, it didn't work!
At this point, I am extremely frustrated. I decided to call Verizon again to replace my router because it was being extremely annoying. It kept resetting itself and I was tired of it. I replaced the router, and this is the router I currently have, but I STILL have the same problem. It resets itself on its own time and I hate it because I'm always in the middle of something. Wow, just wow. There is nothing they could do to help me fix this. I call up a technician, for the millionth time, and he tells me he can't access my router. This occurred with the previous technician who sent me the new router. He tells me his tools are not working and tells me he'll call me back the next day.
It was the next day and I did not receive any phone call. I am extremely disappointed in Verizon FiOS' service and it's customer service. I leave it alone and I just hardwire my laptop to the router. Of course this works, but what's the point of having a laptop when I have to keep it hardwired on my desk? After a day or two, I decide to check if the wireless connection works, and it did. I was surprised. But every now and then, it would shift on and off. Most of the time, the wireless connection is either EXREMELY SLOW or I get none at all, nonetheless, it still says the connection is Excellent.
Please, if there is anyone who could help or try to help me, I would most appreciate it. If there is more information that you need, ask me and I will try my best to provide it to you.

Admittedly, that IS a strange case. Unfortunately, it sounds like all possible troubleshooting has been done by the tech support agents. you mentioned that you were dissatisfied with your other service, did it have a similar problem? theres a possibility of dirty fiber or a bad ONT port, but the random rebooting of the router would almost exclusively be a bad router. question: is the router in the same location as before?

Cannot access to any site with ssl connection and fail to open safari and keychain, unless restart computer and login in with Guest account.

when Update to 10.7.2 ,I cannot access to any site with ssl connection and fail to open safari and keychain, unless restart computer and login in with Guest account.
OS:10.7.2
Macbook Pro 2010-mid 13inch

I also have the same problem, however if I use Firefox or Opera sites with ssl connection work fine. Still, I can't use Google Chrome (ssl), Safari (ssl), the Mac app store (generally), or the iTunes store (generally). Both the iTunes store, Safari and the app store won't respond, and Chrome displays this error: (net::ERR_TIMED_OUT). The problem persists regardless of what network I'm using. Also, when trying to access the keychain or iCloud, the process will not start (will hang). I didn't have these problems at all before updating to 10.7.2.
Sometimes rebooting helps, and sometimes not. If the problem disappears by rebooting, then it only lasts a few minutes before it reappears. It is very frustrating, especially since there doesn't seem to be any obvious or consistent way of which to fix it.
I'm also using a Macbook Pro 13-inch mid 2010.

E4200 messing with my connection

Similar Messages

Maybe you are looking for