E71 date problem with alarm on working days

I've a E71 (firmware : 110.07.127)
I use the alarm function to wake up me during the week. There is no alarm on week-end. I switch of my phone off every night and on the week end when on saturday i switch it on the date is the friday date. The time is the good one.
It's a problem because this morning my phone alarm does't work and when i turn my phone on the date was the last sadurday one
Solved!
Go to Solution.

Yes, this is a known problem on S60 3rd Edition. Have a look at this thread.
FreeBird

Similar Messages

I have a problem with iCal.Since 2 days ago,I couldn't add new event in iCal on my ipad2.It Keeps saying 'No calendar has been set", then if I go to Calendar field,choose one calendar,it gives this msg "That event doesn't belong to that event store".

I have a problem with iCal.Since 2 days ago,I couldn't add new event in iCal on my ipad2.It Keeps saying 'No calendar has been set", then if I go to Calendar field,choose one calendar,it gives this msg "That event doesn't belong to that event store". I can add event from iCloud and from my iCal on my iMac. Please help

Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.)

Is it possible to create a variable in bex with the last work day?

Hi Gurus
Is it possible to create a variable in bex with the last work day?
Actually end-user every day open queries,
    - Put in selection date day - 1 or
    - put last Friday if the day is Monday or
    - put last Thursday if the day is Monday and Friday is holiday (in a calendar for example 25 the December).
Please do the needful. It is urgent
Thanks in advance
Raj

Try this logic in a customer exit:
DATA: l_s_range TYPE rsr_s_rangesid.
DATA: X_PERIOD LIKE T009B-POPER,
           X_YEAR   LIKE T009B-BDATJ.
CASE I_VNAM.
WHEN 'ZPREVWORKDAY'.
    DATA: l_DayOfWeek(1) TYPE C,
          l_act_date     TYPE d,
          l_prev_date    TYPE d.
    l_act_date = sy-datum.
    CALL FUNCTION 'DATE_COMPUTE_DAY'
         EXPORTING DATE = l_act_date
         IMPORTING DAY = l_DayOfWeek.
    CASE l_DayOfWeek.
      WHEN '1'.
        l_prev_date = l_act_date - 3.
      WHEN '2'.
        l_prev_date = l_act_date - 1.
      WHEN '3'.
        l_prev_date = l_act_date - 1.
      WHEN '4'.
        l_prev_date = l_act_date - 1.
      WHEN '5'.
        l_prev_date = l_act_date - 1.
      WHEN '6'.
        l_prev_date = l_act_date - 1.
      WHEN '7'.
        l_prev_date = l_act_date - 2.
    ENDCASE.
    l_s_range-low = l_prev_date.
    APPEND l_s_range TO e_t_range.
ENDCASE.
Edited by: Tyler Blouse on Feb 13, 2008 8:28 PM

Please Help: A Problem With Oracle-Provided 'Working' Example

A Problem With Oracle-Provided 'Working' Example Using htp.formcheckbox
I followed the simple steps in the Oracle-provided example:
Doc ID: Note:116534.1
Subject: How to use checkbox in webdb for bulk update using webdb report
However, when I select a checkbox and click on the Update button, I get a "ORA-01036: illegal variable name/number" error. Please advise. This was a very promising feature.
Fred
Below are step-by-step instructions provided by Oracle to create this "working" example:
How to use a checkbox in WEBDB 2.2 report for bulk update.
PURPOSE
This article shows how checkbox can used placed on WEBDB report
and how to use it.
SCOPE & APPLICATION
The following example to guide through the steps to create a working
example of this.
In this example, the checkbox is used to select the records. On clicking
the update button, the pl/sql procedure is called which will update col1 to
the string 'OK'.
After the update is done, the PL/SQL procedure calls the report again.
Since the report only select records where col1 is null, the updated
records will not be displayed when the report is called again.
Step 1 - Create Table
From Sqlplus, log in as scott/tiger and execute the following:
drop table chkbox_example;
create table chkbox_example
(id varchar2(10) not null,
comments varchar2(20),
col1 varchar2(10));
Step 2 - Insert Test Data
From Sqlplus, still logged in as scott/tiger , execute the following:
declare
l_i number;
begin
for l_i in 1..50 loop
insert into chkbox_example values (l_i, 'Comments ' || l_i , NULL);
end loop;
commit;
end;
Step 3 -Create SQL Query based WEBDB report
Logon to a WEBDB site which has access to the database the above tables are created.
Create a SQL based Report.
Name the report :RPT_CHKBOX
The select statement for the report is :
select c.id, c.comments, c.col1,
htf.formcheckbox('p_qty',c.id) Tick
from SCOTT.chkbox_example c
where c.col1 is null
In Advanced PL/SQL, (REPORT, Before displaying the form), put the following code
htp.formOpen('scott.chkbox_process');
htp.formsubmit('p_request','Update');
htp.br;
htp.br;
Step 4 - Create a stored procedure in the database
Log on to the database as scott/tiger and execute the following to create the
procedure.
Note: Replace WEBDB to the appropriate webdb user for your installation.
In my database, I had installed webdb using WEBDB username, hence user webdb owns
the packages.
create or replace procedure chkbox_process
( p_request in varchar2 default null,
p_qty in wwv_utl_api_types.vc_arr ,
p_arg_names in wwv_utl_api_types.vc_arr ,
p_arg_values in wwv_utl_api_types.vc_arr
is
i number;
begin
for i in 1..p_qty.count loop
if p_qty(i) is not null then
begin
update chkbox_example
set col1 = 'OK'
where chkbox_example.id = p_qty(i);
end;
end if;
end loop;
commit;
/* To Call Report again after updating */
SCOTT.RPT_CHKBOX.show
(p_request=>'Run Report',
p_arg_names=>webdb.wwv_standard_util.string_to_table2(' '),
p_arg_values=>webdb.wwv_standard_util.string_to_table2(' '));
end;
Summary
There are essentially 2 main modules, The WEBDB report and the pl/sql procedure (chkbox_process)
A button is created via the advanced pl/sql coding which shows on top of the report. (The
button cannot be placed at the bottom of the report due to the way WEBDB creates the procedure
internally)
When any button is clicked on the report, it calls the pl/sql procedure chkbox_process.
The procedure is called , WEBDB always passes the parameters p_request,p_arg_names and o_arg_values.
p_qty is another parameter that we are passing additionally, This comes from the checkbox created
using the htf.formcheckbox in the report select statement.
The pl/sql procedure calls the report again after processing. This is done to
show how to call the report.
Restrictions:
-The Next and Prev buttons on the report will not work.
So it is important that the report can fit in 1 page only.
(This may mean that you will not select(not ticked) 'Paginate' under
'Display Option' in the WEBDB report. If you do this,
then in Step 4, remove p_arg_names and p_arg_values as input parameters
to the chkbox_process)

If your not so sure you can use the instanceof
insurance,
Object o = evt.getSource();
if (o instanceof Button) {
Button source = (Button) o;
I haven't thoroughly read the thread, but I use something like this:if (evt.getSource() == someObjRef) {
// do that voodoo
]I haven't looked into why you'd be creating a new reference...

I am getting problem with internal table & work area declaration.

I am working with 'makt' table ..with the table makt i need to work with styles attributes ..so i declared like this
TYPES : BEGIN OF ty_makt,
         matnr TYPE makt-matnr,
         spras TYPE makt-spras,
         maktx TYPE makt-maktx,
         maktg TYPE makt-maktg,
         celltab TYPE lvc_t_styl,
       END OF ty_makt.
DATA : i_makt TYPE TABLE OF ty_makt.
DATA : wa_makt TYPE ty_makt .
    But end of program i need to update dbtable "makt"...i am getting problem with internal table & work area declaration.
i think makt table fields mapping and internal table/work area mapping is not correct. so please help me to get out from this.

Hi Nagasankar,
TYPES : BEGIN OF TY_MATNR,
              MATNR TYPE MAKT-MATNR,
              SPRAS TYPE MAKT-SPRAS,
              MAKTX TYPE MAKT-MAKTX,
              MAKTX TYPE MAKT-MAKTG,
              CELLTAB TYPE LVC_T_STYL, " Its Working perfectly fine..
             END OF TY_MAKT.
DATA: IT_MAKT TYPE STANDARD TABLE OF TY_MAKT,
          WA_MAKT TYPE TY_MAKT.
Its working perfectly fine. if still you are facing any issue post your complete code.
Thanks,
Sandeep

Has anyone ever had a problem with your iphone working outside your home but not inside. The internet works fine in and outside of the house

Has anyone had problems with your iphone working outside of the house, but not inside? Cannot make or receive calls, nor can I send or receive any text messages. This is something that just happened out of nowhere. Can I get some help please?

Did you used to have service and now suddenly you don't?
This happened to me a few years back, and several other iPhone users in my neighborhood, and after a while on the phone with AT&T they figured out that a technician had recently adjusted the receiver/sender on the tower and it was slightly off. They sent them back up and I actually had a better signal after than I did before it went out.
I would call AT&T and explain the issue you are having and see if they can fix it.
If you never had service there then like wjosten said it's probably just a bad zone.
Hope you get it sussed out.
-PM

I'm having constant problems with pages not working. I.E.: I cannot fill in writeable fields, click on buttons... or anything... nothing on the page works. And, this is not exclusive to a particular site. I can, however, work well in Explorer.

For the last few weeks I have had constant problems with pages not working. I.E.: I cannot fill in writeable fields, click on buttons... or anything... nothing on the page works. And, this is not exclusive to a particular site. It does seem to be a browser issue, because I can work well in Explorer.

Both the Yahoo! Toolbar extension and the Babylon extension have been reported to cause an issue like that. Disable or uninstall those add-ons.
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Since upgrading my Macbook pro with Yosemite, I have problem with my Xerox Work Centre 3045 - the printer works normally but it does not recognise the scanner, can you help with this?

Since upgrading my Mac book pro with Yosemite, I have problems with my Xerox Work Centre 3045 printer. The printer works normally but it does not recognise scanner, I can not scan anything. Can you help?

Open Disk Utility and select your hard drive, then Repair Permissions, it will probably return a very large number of errors, primarily printer and library errors, so run it a second time. Then restart the MacBook Pro. If it still will not scan, try using Image Capture from Finder > Applications and see if that will work. If not, contact Xerox about updated drivers.

I installed ios7 last week. The Safari screen is blank, and nothing works in the Search bar. Problems with facetime the previous day, but that is solved. What's up with Safari?

I installed ios7 on the iPad last week. Problems with factime, but solved with online support. Now the Safari screen is blank, and nothing works in the Search bar. What's up with that? All other Internet uses are working.

Hi, a too full hard drive can really mess things up.
Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, , try to clear at least 10 GB of space & empty the trash, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

Having data problems with ios6, seems to be a unique problem?

My little brother recently bought an iphone 4s and imediately upgraded to ios6. Since the phone has been in use (less than 30 days) the phone company (bell a canadian company) claims he has used up 17 Gigs of data but the iphone counter says he has only used 5 gigs. I realize the counter may not be totally accurate but that big of a difference seems a little crazy. I also have an iphone 4s with the ios 6 and my data usage that my phone counter displays matches what my phone company says almost perfect (a few mb difference). The data amounts come in large chunks on my brothers phone and at very odd times such as: 1456.28 mb at 4:04 am, or 4268.07mb in one session. He does not use his phone for streaming or anything like that, We are aware of what uses large amounts of data and what does not. he uses it for facebook twitter web browing etc.
When talking to tech support one guy said that we could have a "lemon" phone claiming that a known problem with ios6 can cause the data to somehow get "scrambled" and completely making up data usage numbers to send to the phone company. According to him this makes it an apple problem.
My main question is has anyone heard of this? If so I am looking for articles talking abut this problem, we are looking at $1000.00 in overage chrges and are preparing for a fight with the phone company.
The counter has never been reset and I know that I use my iphone 4s much more than my brother (I stream utube and radio stations alllll the time, goole maps etc) and have never once gone over my 6 gb limit. It just seems quite crazy to me that the difference in the iphone data collector (about 5 gb) and what the phone company has (17gb) is so great. To me that is indicating a serious problem. Any input would be greatly appreciated!
Thanks
Crystal

kleptul wrote:
I have upgraded from a SB Li've! to an SB Li've 24-bit, but I HAVE performed a complete format/clean install of WinXP SP2 to try to correct this problem. WinXP at first recognizes the card as a "Multimedia Audio Controller(the whole yellow "!" found in device manager). Upon installing either the drivers that came with the CD or the updated drivers from the website, the card works fine until I start the system up again, and I'm back at square one, having to install either set of drivers again(and rebooting) to have the card work properly once again. But after shutting down AGAIN... It's like I never installed the drivers in the first place. I'm running in a vicious circle here, like WinXP refuses to acknowledge the drivers permanently. I have formatted and reinstalled WinXP SP2 a total of three times now, to no avail. I'm a computer tech of 2 years and have NEVER seen a problem such as this. Each time the device manager comes up as "drivers for this device has not been installed". And from personal experiences/general knowledge, this does not sound like faulty hardware to me. It's THIS kind of instabilaty that makes me actually MISS dos! Um... help?
Hi
Sounds like your system don't recognize the sard (BIOS or OS).
Does your system recognize the card as a "Creative Li've! 24-bit" or something (is PnP functionality in use?) even it don't work? Is BIOS battery well?
Have you tried by installing Li've! in another PCI slot?
Is there some security settings set on XP, and are you installing with full admin rights? Can you find the driver files even when your card is not functioning?
Also, have you tried install drivers by executing the ctzapxx.exe found on installation package.
jutapaMessage Edited by jutapa on 0-06-2006 08:53 PM

Date problem with 5320!

I bought a nokia 5320 xm a few days ago and i am really satisfied with it.
But i have got some problems with the date the always gets in advance within days.
For eg. i set the date to Friday 13 february 2009, afte 1-2 days, the date changes to Tue 17 feb 09. It always gets 4 days in advance and that's really annoying when setting new alarms.Can someone help me resolve this problem?
My firmware version is 4.12.
Should i update to 4.13? Is there a newer version?
For those who have 5320, from which country is it from? I didn't get from Finland so i took Korea. Is it of good quality?
Plz reply...

Do you use the alarm clock and switch the phone off at night?
If so this is a common bug that has effected many models lately. The only workaround is to leave the phone switched on at night.
It may have been fixed in an updated firmware so check here for new firmware: www.nokia.com/softwareupdate
If no new updates are available then let nokia about the issue by using the "contact us" link near the top of the page.
The quality of your model is the same as the quality of Finnish models.
Message Edited by psychomania on 13-Feb-2009 11:07 AM

Problems with alarm

Hi,
Have had a problem with the alarm on my iPhone since I updated my 3GS to IOS4. The problem is I had about 10 recurring alarms before I updated that have literally multiplied by thousands now. There are so many i cannot even get into the alarm part of the clock app with out it crashing. This is very annoying because so many go off at once that it causes the iPhone to crash because of RAM shortage and this happens every day, a solid hour of my iPhone going crazy between the hours of 7am to 8 am. Worse still when i upgraded to the iPhone 4 the bug came with it!
Would anyone have any idea how to fix this? I keep praying for a patch!
Thanks

Thanks!!! Worked a charm!
I tried restoring before but never as a new phone!
Cheers man!! Much appreciated!

View for active Incidents related to WI (Problem) with status (Active) works but can't be changed.

Hi,
I wanted to create a view of Incidents which are linked to a Problem (any problem).
I did a quick test using the Incident (advanced) class, selected to display Incidents with status Active and [Work Item] Is Related To Work Item and status for Problem with the status Active.
At this first test I didn't bother to select any specific columns to display but just went with the pre-selected ( Description, Display Name, Display Name) and it worked.
I got a list of expected Incidents in the view but having the Description column made it quite useless.
So, when I try to select the columns I find useful it will not update and it returns a No items found message instead.
(image removed due to limitations)
It is of course possible to group by one of the Display Name fields and collapse to get a more workable view but it still lacks a lot of good information. One would like to include ID, title, Created date,
date modified, Display Name for Affected User and Assigned to user, and a few others.
I was just a bit stumped as to why this fails when changing the columns on a view that obviously is possible to create.
Thanks in advance,
Daniel

Consider using the Advanced View Editor( or
the free edition), since it has much more robust criteria and column editing capabilities.

Live Data / Problem with file permissions

Just trying out an old version of Dreamweaver MX 2004. I am
using my webhosting service for remote server/testing server
duties. It is running PHP 4.3.10 and MySQL 3.23.58. I was able to
set up the database connection and test-retrieve a recordset with
no problems. In following the tutorial I found that Livedata
wouldn't work, it just giving me a warning about file permissions
being wrong. It turns out that when Dreamweaver creates a temporary
file of the work-in-progress to upload to the remote server the
file is created on the server with owner=rw, group=rw, world=r
which explains why it won't run - group has to be set to group=r.
The file is created on the fly and then immediately deleted by
Dreamweaver so it is impossible to manually set the permission on
the server and probably fairly pointless too.
I tried just saving the file and previewing in the browser
which again causes it to be uploaded to the remote server. The
first time this resulted in the browser offering a file download
box instead of running the page. The reason is - again - that
Dreamweaver is setting the uploaded file permissions to include
group=rw. If I manually set the permission for group to group=r it
runs fine.
It turns out that Dreamweaver is always setting the file
permissions on file uploads (checked php and html) to the
remote/testing server to include group=rw. Once I set it manually
on the remote/testing server to group=r for a php file everything
is fine and subsequent uploads of the same file do not change it
again.
I checked with the webhosting company and their second-line
have reported back to me that the default file permission they set
on uploaded files includes group=r so it must be DW that is causing
the problem by setting group=rw the first time. I confirmed this by
using WS-FTP to upload the same file (renamed) to the same target
directory and the permissions set were owner=rw, group=r, world=r.
So
Can anyone please tell me how to change the permissions DW
sets on files written to a remote server because I have spent
countless hours on it without success. From looking at other posts
in this forum it could be that other users are hitting the same
kind of problem with DW8

Stop using Live Data with a hosting account. Set up PHP and
MySQL locally on
your machine. That is how it's supposed to work. You
shouldn't test files on
the fly on a host as you write them. Change your test account
in DW to use
the local server. Upload your files to your remote server
after they are
fully tested.
Tom Muck
http://www.tom-muck.com/
"nigelssuk" <[email protected]> wrote in
message
news:[email protected]...
> Just trying out an old version of Dreamweaver MX 2004. I
am using my
> webhosting
> service for remote server/testing server duties. It is
running PHP 4.3.10
> and
> MySQL 3.23.58. I was able to set up the database
connection and
> test-retrieve a
> recordset with no problems. In following the tutorial I
found that
> Livedata
> wouldn't work, it just giving me a warning about file
permissions being
> wrong.
> It turns out that when Dreamweaver creates a temporary
file of the
> work-in-progress to upload to the remote server the file
is created on the
> server with owner=rw, group=rw, world=r which explains
why it won't run -
> group
> has to be set to group=r. The file is created on the fly
and then
> immediately
> deleted by Dreamweaver so it is impossible to manually
set the permission
> on
> the server and probably fairly pointless too.
>
> I tried just saving the file and previewing in the
browser which again
> causes
> it to be uploaded to the remote server. The first time
this resulted in
> the
> browser offering a file download box instead of running
the page. The
> reason is
> - again - that Dreamweaver is setting the uploaded file
permissions to
> include
> group=rw. If I manually set the permission for group to
group=r it runs
> fine.
>
> It turns out that Dreamweaver is always setting the file
permissions on
> file
> uploads (checked php and html) to the remote/testing
server to include
> group=rw. Once I set it manually on the remote/testing
server to group=r
> for a
> php file everything is fine and subsequent uploads of
the same file do not
> change it again.
>
> I checked with the webhosting company and their
second-line have reported
> back
> to me that the default file permission they set on
uploaded files includes
> group=r so it must be DW that is causing the problem by
setting group=rw
> the
> first time. I confirmed this by using WS-FTP to upload
the same file
> (renamed)
> to the same target directory and the permissions set
were owner=rw,
> group=r,
> world=r.
>
> So
>
> Can anyone please tell me how to change the permissions
DW sets on files
> written to a remote server because I have spent
countless hours on it
> without
> success. From looking at other posts in this forum it
could be that other
> users
> are hitting the same kind of problem with DW8
>

Nano problems with Alarm clocks(lik e Luna or others)

I have a new nano 4gb, and an Xtrememac Luna... My old ipod 2nd gen worked perfecly, the new nano has problems instead.. When my alarm function lit the ipod, it does not play the song, but remain in pause... The nano wakes up, but old nano started to play the song, this stands in pause. Why this? Can I hope in a fix or something? many people have this problem...
Possible solutions?
thanks in advance

Since there was no reply from Apple so far I called their service today.
The claimed that this problem was not known with the devices which they are selling and that they can't tell about 3rd party alarm clocks.
Big news! Who would have thought of that answer?
Well I then called the manufacturer of my alarm clock which is called "auvisio", one of these cheap copies. They knew about the problem with the nano 3G on thier device and said that they can't offer a solution so far. They offered RMA which I would say is quite nice of them but it doesn't help me much with my wake-up-problem in the morning.
I already settled with the thought that I would have to buy the more expensive Apple stuff but as I read above even Bose seems to have the problem. Complete confusion.
Hopefully firmware 1.0.3 will be released soon and can finally solve these problems. Release 1.0.2 definitely was a step into the opposite direction...

E71 date problem with alarm on working days

Similar Messages

Maybe you are looking for