E71: error: SIP "profiles in same realm must have ...

I have a E71-1 with the latest 110.07.127 firmware. I am trying to create a second SIP profile, but I cannot save it as I get the error message
"Unable to save. Profiles in same realm must have same user name"
From what I understand, one creates a VoIP profile and then adds separate SIP profiles for each SIP server/access point pair[*]. I've found no other way to be able to quickly connect to the same SIP server from two different Wifi networks, or even have the phone automatically log in.
The problem is that if I create a second profile with the same proxy/registrar settings (same realm, user, password) but a different access point (and profile name), I get the above error and cannot save the new profile.
I have tried to delete all profiles and recreate them, I have tried recreating them from scratch and copying from an existing profile, and I have triple-checked that all the realms, usernames, and passwords are identical and correct. The error persists.
There was already a discussion at /discussions/board/message?board.id=smartphones&message.id=15695, but it has no solution.
Any idea what the problem may be and how I can solve or work around it?
Thanks,
-m
[*] This sucks as it requires a lot of data duplication, and when the passwords change, it's a *major* pain. It would be better to have SIP account profiles, independent of any connection-specific settings, and let VoIP profiles link those account profiles to access points. Since the SIP proxy setting might well be dependent on the connection, an alternative would be to simply allow me to choose a set of access points for each SIP account profile.

SOLVED: when you create a second SIP profile using an existing one, the password are not copied, and therefore the system interpeters it as a different user throwing the error. Resubmit the password for both proxy and registar servers and it will work.
Remember: after that you have to check in the newly created profile under Tools-Settings-Connection-Internet Tel.-<<your profile>>

Similar Messages

Getting Error : WebDynpro Exception: IDs with Namespace Must Have the

Hi Experts,
I am getting following error while running Webdynpro application, Please give me solution
The following error text was processed in the system E6I : WebDynpro Exception: IDs with Namespace Must Have the Format /<namespace>/<id>
The error occurred on the application server HCSAP2950-1_E6I_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE of program CX_WD_GENERAL=================CP
Method: CONSTRUCTOR of program CL_WDR_VIEW_ELEMENT===========CP
Method: CONSTRUCTOR of program CL_WD_TABLE_COLUMN============CP
Method: NEW_TABLE_COLUMN of program CL_WD_TABLE_COLUMN============CP
Method: IF_WDR_VIEW_DELEGATE~WD_CREATE_UI_TREE of program /1BCWDY/AK98KQL1OONYBLIT9ARC==CP
Method: CREATE_UI_TREE of program CL_WDR_DELEGATING_VIEW========CP
Method: INIT_CONTROLLER of program CL_WDR_VIEW===================CP
Method: INIT of program CL_WDR_CONTROLLER=============CP
Method: GET_VIEW of program CL_WDR_VIEW_MANAGER===========CP
Method: BIND_ROOT of program CL_WDR_VIEW_MANAGER===========CPThanks,
satish

Hi,
SAP Notes 1242377, 1381873, 1389146
Threads:
WebDynpro Exception: IDs with Namespace Must Have the Format /<namespace>/<
regards, Lukas

E71 and two SIP profiles

I have configured two SIP profiles (same sip provider, different accounts, different realms) and to my utmost surprise second profile is using username from the first, which makes registration fail.
Any hints? I suspect it is a bug...

I have a similar problem: trying to duplicate a SIP profile in order to define a different access point I got the error:
"Profile in the same realm must have the same username..."
even if the username is the same, I changed only the access point. I think this is a bug related to the previous post.
Carlo

Controlling area & operating concern must have same fiscal year variant

Dear Experts,
Whether i can assign two controlling area with different fiscal year variant to one operating concern.
Getting error 'Controlling area & operating concern must have same fiscal year variant'
Fiscal year variant must be same or Number of posting period must be same.
regards
RR
Moderator: Please, search before posting

Hi ajay,
I did the testing also,
System is showing error msg' Controlling area & operating concern must have same fiscal year variant'
But someone told me. number of Posting period must be same not fiscal year variant.That why i am confused.
I assigned all company code same posting period variant in different controlling area.Still facing same error.
That why i have posted in SDN.
regards
RR

Proxy generation terminated: Message must have exactly one part

hi experts,
i have tryed to create a proxy in abap but it gives an error message
Proxy generation terminated: Message must have exactly one part
Message no. SPRX046
can any one help me
the wsdl document is
- <wsdl:definitions targetNamespace="urn:sap-com:document:sap:rfc:functions">
−
     <wsdl:types>
−
     <xsd:schema targetNamespace="urn:sap-com:document:sap:rfc:functions" elementFormDefault="unqualified" attributeFormDefault="qualified">
−
     <xsd:simpleType name="char1">
−
     <xsd:restriction base="xsd:string">
<xsd:maxLength value="1"/>
</xsd:restriction>
</xsd:simpleType>
−
     <xsd:simpleType name="char10">
−
     <xsd:restriction base="xsd:string">
<xsd:maxLength value="10"/>
</xsd:restriction>
</xsd:simpleType>
−
     <xsd:simpleType name="char100">
−
     <xsd:restriction base="xsd:string">
<xsd:maxLength value="100"/>
</xsd:restriction>
</xsd:simpleType>
−
     <xsd:simpleType name="char20">
−
     <xsd:restriction base="xsd:string">
<xsd:maxLength value="20"/>
</xsd:restriction>
</xsd:simpleType>
−
     <xsd:simpleType name="char220">
−
     <xsd:restriction base="xsd:string">
<xsd:maxLength value="220"/>
</xsd:restriction>
</xsd:simpleType>
−
     <xsd:simpleType name="char30">
−
     <xsd:restriction base="xsd:string">
<xsd:maxLength value="30"/>
</xsd:restriction>
</xsd:simpleType>
−
     <xsd:simpleType name="char32">
−
     <xsd:restriction base="xsd:string">
<xsd:maxLength value="32"/>
</xsd:restriction>
</xsd:simpleType>
−
     <xsd:simpleType name="char50">
−
     <xsd:restriction base="xsd:string">
<xsd:maxLength value="50"/>
</xsd:restriction>
</xsd:simpleType>
−
     <xsd:simpleType name="clnt3">
−
     <xsd:restriction base="xsd:string">
<xsd:maxLength value="3"/>
</xsd:restriction>
</xsd:simpleType>
−
     <xsd:simpleType name="numeric15">
−
     <xsd:restriction base="xsd:string">
<xsd:maxLength value="15"/>
<xsd:pattern value="\d*"/>
</xsd:restriction>
</xsd:simpleType>
−
     <xsd:simpleType name="numeric3">
−
     <xsd:restriction base="xsd:string">
<xsd:maxLength value="3"/>
<xsd:pattern value="\d*"/>
</xsd:restriction>
</xsd:simpleType>
−
     <xsd:simpleType name="numeric6">
−
     <xsd:restriction base="xsd:string">
<xsd:maxLength value="6"/>
<xsd:pattern value="\d*"/>
</xsd:restriction>
</xsd:simpleType>
−
     <xsd:complexType name="ZCAF_DEP_QUEST">
−
     <xsd:sequence>
<xsd:element name="MANDT" type="tns:clnt3"/>
<xsd:element name="DEPQTN_ID" type="tns:numeric15"/>
<xsd:element name="QTNID" type="tns:numeric15"/>
<xsd:element name="ANS_CHOICE_ID" type="tns:numeric15"/>
</xsd:sequence>
</xsd:complexType>
−
     <xsd:complexType name="ZCAF_ANSWER_META">
−
     <xsd:sequence>
<xsd:element name="MANDT" type="tns:clnt3"/>
<xsd:element name="ANS_META_ID" type="tns:numeric15"/>
<xsd:element name="HAS_COMMENT" type="tns:char1"/>
<xsd:element name="HAS_MULTI_CHOICE" type="tns:char1"/>
<xsd:element name="MULTISELECT_ALLO" type="tns:char1"/>
<xsd:element name="NA_POSSIBLE" type="tns:char1"/>
<xsd:element name="DATA_TYPE" type="tns:char1"/>
<xsd:element name="VALUE_TYPE" type="tns:char1"/>
<xsd:element name="DISPLAY_TYPE" type="tns:char1"/>
</xsd:sequence>
</xsd:complexType>
−
     <xsd:complexType name="ZCAF_QUEST_GROUP">
−
     <xsd:sequence>
<xsd:element name="MANDT" type="tns:clnt3"/>
<xsd:element name="QTNGRPID" type="tns:numeric15"/>
<xsd:element name="TITLE" type="tns:char30"/>
<xsd:element name="REPLACE_TEXT" type="tns:char30"/>
<xsd:element name="LANGUAGE" type="tns:char10"/>
<xsd:element name="DESCRIPTION" type="tns:char30"/>
<xsd:element name="HEADER_TEXT" type="tns:char20"/>
<xsd:element name="CREATED_BY" type="tns:char20"/>
<xsd:element name="ANS_META_ID" type="tns:numeric15"/>
<xsd:element name="RELEASE_STATUS" type="tns:char10"/>
<xsd:element name="VERSION" type="tns:char10"/>
</xsd:sequence>
</xsd:complexType>
−
     <xsd:complexType name="ZCAF_COMMENT_ANS">
−
     <xsd:sequence>
<xsd:element name="MANDT" type="tns:clnt3"/>
<xsd:element name="COMMENT_ANS_ID" type="tns:numeric15"/>
<xsd:element name="ANSSHEET_ID" type="tns:numeric15"/>
<xsd:element name="ANS_META_ID" type="tns:numeric15"/>
<xsd:element name="ANS_CHOICE_ID" type="tns:numeric15"/>
<xsd:element name="TEXT_COMMT_ID" type="tns:numeric15"/>
</xsd:sequence>
</xsd:complexType>
−
     <xsd:complexType name="ZCAF_ANS_CHOICE">
−
     <xsd:sequence>
<xsd:element name="MANDT" type="tns:clnt3"/>
<xsd:element name="ANS_CHOICE_ID" type="tns:numeric15"/>
<xsd:element name="ANS_META_ID" type="tns:numeric15"/>
<xsd:element name="HAS_COMMENT" type="tns:char1"/>
<xsd:element name="SEQ_NUM" type="xsd:int"/>
<xsd:element name="ANSWER_TEXT" type="tns:char50"/>
<xsd:element name="LANGUAGE" type="tns:char10"/>
<xsd:element name="WEIGHT" type="xsd:int"/>
<xsd:element name="HAS_DEP_QTN" type="tns:char1"/>
<xsd:element name="HAS_DEP_QTNGRP" type="tns:char1"/>
</xsd:sequence>
</xsd:complexType>
−
     <xsd:complexType name="ZCAF_QUESTION">
−
     <xsd:sequence>
<xsd:element name="MANDT" type="tns:clnt3"/>
<xsd:element name="QTNID" type="tns:numeric15"/>
<xsd:element name="QTNGRPID" type="tns:numeric15"/>
<xsd:element name="ANS_META_ID" type="tns:numeric15"/>
<xsd:element name="QTN_TEXT" type="tns:char100"/>
<xsd:element name="LANGUAGE" type="tns:char10"/>
<xsd:element name="CREATED_BY" type="tns:char20"/>
<xsd:element name="QTNWEIGHTAGE" type="xsd:int"/>
<xsd:element name="VERSION" type="tns:char10"/>
<xsd:element name="RELEASE_STATUS" type="tns:char10"/>
</xsd:sequence>
</xsd:complexType>
−
     <xsd:complexType name="ZCAF_MULTI_ANS">
−
     <xsd:sequence>
<xsd:element name="MANDT" type="tns:clnt3"/>
<xsd:element name="MULTIPLE_ANS_ID" type="tns:numeric15"/>
<xsd:element name="ANSSHEET_ID" type="tns:numeric15"/>
<xsd:element name="ANS_META_ID" type="tns:numeric15"/>
<xsd:element name="ANS_CHOICE_ID" type="tns:numeric15"/>
<xsd:element name="ANSWER_TEXT" type="tns:char50"/>
<xsd:element name="ANS_VALUE" type="xsd:int"/>
</xsd:sequence>
</xsd:complexType>
−
     <xsd:complexType name="ZCAF_COMENT_TEXT">
−
     <xsd:sequence>
<xsd:element name="MANDT" type="tns:clnt3"/>
<xsd:element name="TEXT_COMMT_ID" type="tns:numeric15"/>
<xsd:element name="TEXT_COMMENT" type="tns:char50"/>
</xsd:sequence>
</xsd:complexType>
−
     <xsd:complexType name="ZCAF_DEP_QTNGRP">
−
     <xsd:sequence>
<xsd:element name="MANDT" type="tns:clnt3"/>
<xsd:element name="DEP_QTNGRP_ID" type="tns:numeric15"/>
<xsd:element name="QTNGRPID" type="tns:numeric15"/>
<xsd:element name="ANS_CHOICE_ID" type="tns:numeric15"/>
</xsd:sequence>
</xsd:complexType>
−
     <xsd:complexType name="ZCAF_ANS_SHEET">
−
     <xsd:sequence>
<xsd:element name="MANDT" type="tns:clnt3"/>
<xsd:element name="ANSSHEET_ID" type="tns:numeric15"/>
<xsd:element name="QTNRID" type="tns:numeric15"/>
<xsd:element name="STATUS" type="tns:char1"/>
</xsd:sequence>
</xsd:complexType>
−
     <xsd:complexType name="ZCAF_QTNR_QTNGRP">
−
     <xsd:sequence>
<xsd:element name="MANDT" type="tns:clnt3"/>
<xsd:element name="QTNRID" type="tns:numeric15"/>
<xsd:element name="QTNGRPID" type="tns:numeric15"/>
</xsd:sequence>
</xsd:complexType>
−
     <xsd:complexType name="ZCAF_QUESTIONIRE">
−
     <xsd:sequence>
<xsd:element name="MANDT" type="tns:clnt3"/>
<xsd:element name="QTNRID" type="tns:numeric15"/>
<xsd:element name="TITLE" type="tns:char30"/>
<xsd:element name="REPLACE_TEXT" type="tns:char30"/>
<xsd:element name="LANGUAGE" type="tns:char10"/>
<xsd:element name="DESCRIPTION" type="tns:char30"/>
<xsd:element name="HEADER_TEXT" type="tns:char20"/>
<xsd:element name="CREATED_BY" type="tns:char20"/>
<xsd:element name="RELEASE_STATUS" type="tns:char10"/>
<xsd:element name="VERSION" type="tns:char10"/>
</xsd:sequence>
</xsd:complexType>
−
     <xsd:complexType name="BAPIRET2">
−
     <xsd:sequence>
<xsd:element name="TYPE" type="tns:char1"/>
<xsd:element name="ID" type="tns:char20"/>
<xsd:element name="NUMBER" type="tns:numeric3"/>
<xsd:element name="MESSAGE" type="tns:char220"/>
<xsd:element name="LOG_NO" type="tns:char20"/>
<xsd:element name="LOG_MSG_NO" type="tns:numeric6"/>
<xsd:element name="MESSAGE_V1" type="tns:char50"/>
<xsd:element name="MESSAGE_V2" type="tns:char50"/>
<xsd:element name="MESSAGE_V3" type="tns:char50"/>
<xsd:element name="MESSAGE_V4" type="tns:char50"/>
<xsd:element name="PARAMETER" type="tns:char32"/>
<xsd:element name="ROW" type="xsd:int"/>
<xsd:element name="FIELD" type="tns:char30"/>
<xsd:element name="SYSTEM" type="tns:char10"/>
</xsd:sequence>
</xsd:complexType>
−
     <xsd:complexType name="ZCAF_ST_GET_QUESTIONNAIRE">
−
     <xsd:sequence>
<xsd:element name="QTNID" type="tns:numeric15"/>
<xsd:element name="QTN_TEXT" type="tns:char100"/>
<xsd:element name="ANS_META_ID" type="tns:numeric15"/>
<xsd:element name="HAS_COMMENT" type="tns:char1"/>
<xsd:element name="HAS_MULTI_CHOICE" type="tns:char1"/>
<xsd:element name="MULTISELECT_ALLO" type="tns:char1"/>
<xsd:element name="NA_POSSIBLE" type="tns:char1"/>
<xsd:element name="DATA_TYPE" type="tns:char1"/>
<xsd:element name="VALUE_TYPE" type="tns:char1"/>
<xsd:element name="DISPLAY_TYPE" type="tns:char1"/>
<xsd:element name="ANS_CHOICE" type="tns:ZTCAF_GET_ANS_CHOICE"/>
</xsd:sequence>
</xsd:complexType>
−
     <xsd:complexType name="ZSCAF_ANS_CHOICE">
−
     <xsd:sequence>
<xsd:element name="ANS_CHOICE_ID" type="tns:numeric15"/>
<xsd:element name="ANS_META_ID" type="tns:numeric15"/>
<xsd:element name="HAS_COMMENT" type="tns:char1"/>
<xsd:element name="SEQ_NUM" type="xsd:int"/>
<xsd:element name="ANSWER_TEXT" type="tns:char50"/>
<xsd:element name="LANGUAGE" type="tns:char10"/>
<xsd:element name="WEIGHT" type="xsd:int"/>
<xsd:element name="HAS_DEP_QTN" type="tns:char1"/>
<xsd:element name="HAS_DEP_QTNGRP" type="tns:char1"/>
<xsd:element name="DEP_QTN" type="tns:ZTCAF_DEP_QTN"/>
<xsd:element name="DEP_QTNGRP" type="tns:ZTCAF_DEP_QTN_GRP"/>
</xsd:sequence>
</xsd:complexType>
−
     <xsd:complexType name="ZTCAF_GET_DATA_QUESTIONNAIRE">
−
     <xsd:sequence>
<xsd:element name="item" minOccurs="0" maxOccurs="unbounded" type="tns:ZCAF_ST_GET_QUESTIONNAIRE"/>
</xsd:sequence>
</xsd:complexType>
−
     <xsd:complexType name="ZTCAF_GET_ANS_CHOICE">
−
     <xsd:sequence>
<xsd:element name="item" minOccurs="0" maxOccurs="unbounded" type="tns:ZSCAF_ANS_CHOICE"/>
</xsd:sequence>
</xsd:complexType>
−
     <xsd:complexType name="ZTCAF_DEP_QTN">
−
     <xsd:sequence>
<xsd:element name="item" minOccurs="0" maxOccurs="unbounded" type="tns:ZCAF_DEP_QUEST"/>
</xsd:sequence>
</xsd:complexType>
−
     <xsd:complexType name="ZTCAF_DEP_QTN_GRP">
−
     <xsd:sequence>
<xsd:element name="item" minOccurs="0" maxOccurs="unbounded" type="tns:ZCAF_DEP_QTNGRP"/>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
</wsdl:types>
−
     <wsdl:message name="ZMCAF_CRUD_QUESTIONNAIRE">
<wsdl:part name="IS_ANSCHOICE" type="tns:ZCAF_ANS_CHOICE"/>
<wsdl:part name="IS_ANSMETA" type="tns:ZCAF_ANSWER_META"/>
<wsdl:part name="IS_ANS_SHEET" type="tns:ZCAF_ANS_SHEET"/>
<wsdl:part name="IS_COMM_ANS" type="tns:ZCAF_COMMENT_ANS"/>
<wsdl:part name="IS_COMM_TXT" type="tns:ZCAF_COMENT_TEXT"/>
<wsdl:part name="IS_DEPQTN" type="tns:ZCAF_DEP_QUEST"/>
<wsdl:part name="IS_DEPQTNGRP" type="tns:ZCAF_DEP_QTNGRP"/>
<wsdl:part name="IS_MULT_ANS" type="tns:ZCAF_MULTI_ANS"/>
<wsdl:part name="IS_QTNR_QTNGRP" type="tns:ZCAF_QTNR_QTNGRP"/>
<wsdl:part name="IS_QTN_GRP" type="tns:ZCAF_QUEST_GROUP"/>
<wsdl:part name="IS_QUESTION" type="tns:ZCAF_QUESTION"/>
<wsdl:part name="IS_QUESTIONNAIRE" type="tns:ZCAF_QUESTIONIRE"/>
<wsdl:part name="IV_CHOICE" type="tns:char1"/>
<wsdl:part name="IV_QTNR_ID" type="tns:numeric15"/>
<wsdl:part name="IV_TYPE" type="tns:char10"/>
</wsdl:message>
−
     <wsdl:message name="ZMCAF_CRUD_QUESTIONNAIREResponse">
<wsdl:part name="ET_QTNR_GET_DATA" type="tns:ZTCAF_GET_DATA_QUESTIONNAIRE"/>
<wsdl:part name="RETURN" type="tns:BAPIRET2"/>
</wsdl:message>
−
     <sap:Feature name="design_0 " uri="http://www.sap.com/webas/630/soap/features/authentication/">
−
     <sap:Property qname="n0:AuthenticationLevel">
<sap:Option value="n0:Basic"/>
</sap:Property>
</sap:Feature>
−
     <wsdl:portType name="zwsquestionnaire">
<sap:useFeature feature="tns:design_0 "/>
−
     <wsdl:operation name="ZMCAF_CRUD_QUESTIONNAIRE">
<wsdl:input message="tns:ZMCAF_CRUD_QUESTIONNAIRE"/>
<wsdl:output message="tns:ZMCAF_CRUD_QUESTIONNAIREResponse"/>
</wsdl:operation>
</wsdl:portType>
−
     <wsdl:binding name="zwsquestionnaireSoapBinding" type="tns:zwsquestionnaire">
<soap:binding style="rpc" transport="http://schemas.xmlsoap.org/soap/http"/>
−
     <wsdl:operation name="ZMCAF_CRUD_QUESTIONNAIRE">
<soap:operation soapAction=""/>
−
     <wsdl:input>
<soap:body use="literal" namespace="urn:sap-com:document:sap:rfc:functions"/>
</wsdl:input>
−
     <wsdl:output>
<soap:body use="literal" namespace="urn:sap-com:document:sap:rfc:functions"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
−
     <wsdl:service name="zwsquestionnaireService">
−
     <wsdl:port name="zwsquestionnaireSoapBinding" binding="tns:zwsquestionnaireSoapBinding">
<soap:address location="http://localhost:8000/sap/bc/srt/rfc/sap/ZWSQUESTIONNAIRE?sap-client=000"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>

OK , could you please help me?
SAP error message;
Proxy generation terminated: Message must have exactly one part
Diagnosis
In a WSDL document, a <message> must contain exactly one <part>, therefore:
<message name="check_serviceHttpGetIn">
<part .../>
</message>
WSDL document;
<?xml version="1.0" encoding="utf-8"?>
<wsdl:definitions xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="http://tempuri.org/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tm="http://microsoft.com/wsdl/mime/textMatching/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" targetNamespace="http://tempuri.org/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
   <wsdl:types>
     <s:schema elementFormDefault="qualified" targetNamespace="http://tempuri.org/">
       <s:element name="check_service">
         <s:complexType />
       </s:element>
       <s:element name="check_serviceResponse">
         <s:complexType>
           <s:sequence>
             <s:element minOccurs="1" maxOccurs="1" name="check_serviceResult" type="s:boolean" />
           </s:sequence>
         </s:complexType>
       </s:element>
       <s:element name="get_puantaj_data">
         <s:complexType>
           <s:sequence>
             <s:element minOccurs="0" maxOccurs="1" name="personel_sicilno" type="s:string" />
             <s:element minOccurs="1" maxOccurs="1" name="yil" type="s:int" />
             <s:element minOccurs="1" maxOccurs="1" name="ay" type="s:int" />
           </s:sequence>
         </s:complexType>
       </s:element>
       <s:element name="get_puantaj_dataResponse">
         <s:complexType>
           <s:sequence>
             <s:element minOccurs="0" maxOccurs="1" name="get_puantaj_dataResult">
               <s:complexType>
                 <s:sequence>
                   <s:any minOccurs="0" maxOccurs="unbounded" namespace="http://www.w3.org/2001/XMLSchema" processContents="lax" />
                   <s:any minOccurs="1" namespace="urn:schemas-microsoft-com:xml-diffgram-v1" processContents="lax" />
                 </s:sequence>
               </s:complexType>
             </s:element>
           </s:sequence>
         </s:complexType>
       </s:element>
       <s:element name="boolean" type="s:boolean" />
       <s:element name="DataTable" nillable="true">
         <s:complexType>
           <s:sequence>
             <s:any minOccurs="0" maxOccurs="unbounded" namespace="http://www.w3.org/2001/XMLSchema" processContents="lax" />
             <s:any minOccurs="1" namespace="urn:schemas-microsoft-com:xml-diffgram-v1" processContents="lax" />
           </s:sequence>
         </s:complexType>
       </s:element>
     </s:schema>
   </wsdl:types>
   <wsdl:message name="check_serviceSoapIn">
     <wsdl:part name="parameters" element="tns:check_service" />
   </wsdl:message>
   <wsdl:message name="check_serviceSoapOut">
     <wsdl:part name="parameters" element="tns:check_serviceResponse" />
   </wsdl:message>
   <wsdl:message name="get_puantaj_dataSoapIn">
     <wsdl:part name="parameters" element="tns:get_puantaj_data" />
   </wsdl:message>
   <wsdl:message name="get_puantaj_dataSoapOut">
     <wsdl:part name="parameters" element="tns:get_puantaj_dataResponse" />
   </wsdl:message>
   <wsdl:message name="check_serviceHttpGetIn" />
   <wsdl:message name="check_serviceHttpGetOut">
     <wsdl:part name="Body" element="tns:boolean" />
   </wsdl:message>
   <wsdl:message name="get_puantaj_dataHttpGetIn">
     <wsdl:part name="personel_sicilno" type="s:string" />
     <wsdl:part name="yil" type="s:string" />
     <wsdl:part name="ay" type="s:string" />
   </wsdl:message>
   <wsdl:message name="get_puantaj_dataHttpGetOut">
     <wsdl:part name="Body" element="tns:DataTable" />
   </wsdl:message>
   <wsdl:message name="check_serviceHttpPostIn" />
   <wsdl:message name="check_serviceHttpPostOut">
     <wsdl:part name="Body" element="tns:boolean" />
   </wsdl:message>
   <wsdl:message name="get_puantaj_dataHttpPostIn">
     <wsdl:part name="personel_sicilno" type="s:string" />
     <wsdl:part name="yil" type="s:string" />
     <wsdl:part name="ay" type="s:string" />
   </wsdl:message>
   <wsdl:message name="get_puantaj_dataHttpPostOut">
     <wsdl:part name="Body" element="tns:DataTable" />
   </wsdl:message>
   <wsdl:portType name="Aktarim_ServiceSoap">
     <wsdl:operation name="check_service">
       <wsdl:input message="tns:check_serviceSoapIn" />
       <wsdl:output message="tns:check_serviceSoapOut" />
     </wsdl:operation>
     <wsdl:operation name="get_puantaj_data">
       <wsdl:input message="tns:get_puantaj_dataSoapIn" />
       <wsdl:output message="tns:get_puantaj_dataSoapOut" />
     </wsdl:operation>
   </wsdl:portType>
   <wsdl:portType name="Aktarim_ServiceHttpGet">
     <wsdl:operation name="check_service">
       <wsdl:input message="tns:check_serviceHttpGetIn" />
       <wsdl:output message="tns:check_serviceHttpGetOut" />
     </wsdl:operation>
     <wsdl:operation name="get_puantaj_data">
       <wsdl:input message="tns:get_puantaj_dataHttpGetIn" />
       <wsdl:output message="tns:get_puantaj_dataHttpGetOut" />
     </wsdl:operation>
   </wsdl:portType>
   <wsdl:portType name="Aktarim_ServiceHttpPost">
     <wsdl:operation name="check_service">
       <wsdl:input message="tns:check_serviceHttpPostIn" />
       <wsdl:output message="tns:check_serviceHttpPostOut" />
     </wsdl:operation>
     <wsdl:operation name="get_puantaj_data">
       <wsdl:input message="tns:get_puantaj_dataHttpPostIn" />
       <wsdl:output message="tns:get_puantaj_dataHttpPostOut" />
     </wsdl:operation>
   </wsdl:portType>
   <wsdl:binding name="Aktarim_ServiceSoap" type="tns:Aktarim_ServiceSoap">
     <soap:binding transport="http://schemas.xmlsoap.org/soap/http" />
     <wsdl:operation name="check_service">
       <soap:operation soapAction="http://tempuri.org/check_service" style="document" />
       <wsdl:input>
         <soap:body use="literal" />
       </wsdl:input>
       <wsdl:output>
         <soap:body use="literal" />
       </wsdl:output>
     </wsdl:operation>
     <wsdl:operation name="get_puantaj_data">
       <soap:operation soapAction="http://tempuri.org/get_puantaj_data" style="document" />
       <wsdl:input>
         <soap:body use="literal" />
       </wsdl:input>
       <wsdl:output>
         <soap:body use="literal" />
       </wsdl:output>
     </wsdl:operation>
   </wsdl:binding>
   <wsdl:binding name="Aktarim_ServiceSoap12" type="tns:Aktarim_ServiceSoap">
     <soap12:binding transport="http://schemas.xmlsoap.org/soap/http" />
     <wsdl:operation name="check_service">
       <soap12:operation soapAction="http://tempuri.org/check_service" style="document" />
       <wsdl:input>
         <soap12:body use="literal" />
       </wsdl:input>
       <wsdl:output>
         <soap12:body use="literal" />
       </wsdl:output>
     </wsdl:operation>
     <wsdl:operation name="get_puantaj_data">
       <soap12:operation soapAction="http://tempuri.org/get_puantaj_data" style="document" />
       <wsdl:input>
         <soap12:body use="literal" />
       </wsdl:input>
       <wsdl:output>
         <soap12:body use="literal" />
       </wsdl:output>
     </wsdl:operation>
   </wsdl:binding>
   <wsdl:binding name="Aktarim_ServiceHttpGet" type="tns:Aktarim_ServiceHttpGet">
     <http:binding verb="GET" />
     <wsdl:operation name="check_service">
       <http:operation location="/check_service" />
       <wsdl:input>
         <http:urlEncoded />
       </wsdl:input>
       <wsdl:output>
         <mime:mimeXml part="Body" />
       </wsdl:output>
     </wsdl:operation>
     <wsdl:operation name="get_puantaj_data">
       <http:operation location="/get_puantaj_data" />
       <wsdl:input>
         <http:urlEncoded />
       </wsdl:input>
       <wsdl:output>
         <mime:mimeXml part="Body" />
       </wsdl:output>
     </wsdl:operation>
   </wsdl:binding>
   <wsdl:binding name="Aktarim_ServiceHttpPost" type="tns:Aktarim_ServiceHttpPost">
     <http:binding verb="POST" />
     <wsdl:operation name="check_service">
       <http:operation location="/check_service" />
       <wsdl:input>
         <mime:content type="application/x-www-form-urlencoded" />
       </wsdl:input>
       <wsdl:output>
         <mime:mimeXml part="Body" />
       </wsdl:output>
     </wsdl:operation>
     <wsdl:operation name="get_puantaj_data">
       <http:operation location="/get_puantaj_data" />
       <wsdl:input>
         <mime:content type="application/x-www-form-urlencoded" />
       </wsdl:input>
       <wsdl:output>
         <mime:mimeXml part="Body" />
       </wsdl:output>
     </wsdl:operation>
   </wsdl:binding>
   <wsdl:service name="Aktarim_Service">
     <wsdl:port name="Aktarim_ServiceSoap" binding="tns:Aktarim_ServiceSoap">
       <soap:address location="http://192.168.10.151:7979/sap_aktarim/Aktarim_Service.asmx" />
     </wsdl:port>
     <wsdl:port name="Aktarim_ServiceSoap12" binding="tns:Aktarim_ServiceSoap12">
       <soap12:address location="http://192.168.10.151:7979/sap_aktarim/Aktarim_Service.asmx" />
     </wsdl:port>
     <wsdl:port name="Aktarim_ServiceHttpGet" binding="tns:Aktarim_ServiceHttpGet">
       <http:address location="http://192.168.10.151:7979/sap_aktarim/Aktarim_Service.asmx" />
     </wsdl:port>
     <wsdl:port name="Aktarim_ServiceHttpPost" binding="tns:Aktarim_ServiceHttpPost">
       <http:address location="http://192.168.10.151:7979/sap_aktarim/Aktarim_Service.asmx" />
     </wsdl:port>
   </wsdl:service>
</wsdl:definitions>

Message must have exactly one part

hi,
I have tryed to create a proxy in ECC 6.0 abap but it gives an error message:
Proxy generation terminated: Message must have exactly one part
Message no. SPRX046
Background
During proxy generation, an interface description in WSDL format is fetched from the Integration Builder or from another source and interpreted. This WSDL document must describe the whole interface correctly.
==> Display Query
==> Display WSDL Document
Diagnosis
In a WSDL document, a <message> must contain exactly one <part>, therefore:
<message name="ObtenerLicenciaRequest">
<part .../>
</message>
In this case, a <message> has no <part> or multiple <part> entries. Proxy generation cannot process such messages.
System Response
Proxy generation is terminated.*
can any one help me?
The WSDL is:
http://200.0.156.42/lme_pruebas/webservices/webservicesEmpleadores.php?wsdl
Thanks

Here is the fragment from your WSDL. You have more than one line with <part name...>:
- <message name="ObtenerLicenciaRequest">
<part name="rut_empleador" type="xsd:int" />
<part name="dv_rut_empleador" type="xsd:string" />
<part name="rut_usuario" type="xsd:int" />
<part name="dv_rut_usuario" type="xsd:string" />
<part name="password" type="xsd:string" />
<part name="fecha_proceso" type="xsd:dateTime" />
</message>
According to the error message, you must have only one of those, e.g.:
- <message name="ObtenerLicenciaRequest">
<part name="rut_empleador" type="xsd:int" />
</message>

Erro in bursting ZIP file must have at least one entry

Hi All ,
i am using bursting utility for xmlp report ,but getting the following error
--Exception
ZIP file must have at least one entry
java.util.zip.ZipException: ZIP file must have at least one entry
     at java.util.zip.ZipOutputStream.finish(ZipOutputStream.java:304)
     at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.zipOutputFiles(JCP4XDOBurstingEngine.java:534)
     at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.runProgram(JCP4XDOBurstingEngine.java:292)
     at oracle.apps.fnd.cp.request.Run.main(Run.java:161)
i have no clue y this error is coming ,any hint would be very helpful,
Thanks in advance
thanks
Pratap

Hi All
i got resolved this error (Erro in bursting ZIP file must have at least one entry) ,was doing very silly mistake i was using the template name instead of Data Definition code name in location string
location= ' '
so the ZIP file error is removed ,now getting one more error after this ,which i am not able to under stand
--Exception
/tmp/011211_023243126/xdo1_164902_2.pdf (No such file or directory)
java.io.FileNotFoundException: /tmp/011211_023243126/xdo1_164902_2.pdf (No such file or directory)
     at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(FileInputStream.java:106)
     at java.io.FileInputStream.<init>(FileInputStream.java:66)
     at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.zipOutputFiles(JCP4XDOBurstingEngine.java:532)
     at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.runProgram(JCP4XDOBurstingEngine.java:299)
     at oracle.apps.fnd.cp.request.Run.main(Run.java:161)
Please help me on this
Thanks
Pratap

When I tried to download the new version of firefox I get an error message that says "you computer must be restarted to complete an earlier upgrade" when I restart it says the same thing. I cannot use firefox at all at the moment.

When I tried to download the new version of firefox I get an error message that says "your computer must be restarted to complete an earlier upgrade" when I restart it says the same thing. I cannot use firefox at all at the moment. When I try to uninstall in the control panel, the same message pops up.

If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

Error: A file found in a source-path must have the same package structure

I use Adobe Flex Compiler (mxmlc) Version 4.1.0 build 16032,I have a file,named CustomGraphContainerController.as,it's directory is c:\controllers,and the GCController.as file is under the same directory,CustomGraphContainerController.as file like follows
package controllers{
import ui.GraphControlContainer;
public class CustomGraphContainerController extends GCController {
public function CustomGraphContainerController(a_graphControlContainer:GraphControlContainer) {
super(a_graphControlContainer);
Then I want to use mxmlc command to compile it,like follows:
C:\>mxmlc c:\controllers\CustomGraphContainerController.as
But it raise compile errors,like follows:
Loading configuration file C:\sdk\frameworks\flex-config.xml
C:\controllers\GCController.as: Error: A file found in a source-path must have the same package structure '', as the definition's package, 'controllers'.
I don't know how to compile the as file with package controllers? Where is wrong? How to use mxmlc to compile it?
Thanks

HI,
You should have one main application class to compile this as code to swf.. So that main application path should be in your proper package structure.. then you can compile you app and as files also...
Thanks
Ram..

E71 cannot choose which sip profile to use VoIP

I created several sip voip profiles, one for domestic call, another for international call. The problem is, when I dial a number and click on internet call, E71 will persistently use a certain profile merely. I cannot decide which sip profile to use.
Could you please give me some advice? Thx!

Thanks Carlo for your reply.
I have read again the link and you are correct that in using the preferred command together with localhost under POTS dial-peer, I can now select which correct path to choose for my outbound calls. I'm just not very strong with dial-peer and translation rules at the moment.
I will try this solution during the weekend and let you know. But it would have been better if there was a sample configuration for this option.

Error Security BEA-090870 The realm "myrealm" failed to be loaded:

Hi, I am setting up Identity Manager on centos 4.7 with weblogic 10.3. I've followed "Installation and Configuration Guide for BEA WebLogic Server Release 9.1.0.pdf" document. After increasing the memory and setting up the java option, it required post installation tasks. My weblogic domain was unable to start. Please see the error logs below. Thanks in advance.
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m
WLS Start Mode=Development
CLASSPATH=:/u01/app/oracle/bea/patch_wlw1030/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/u01/app/oracle/bea/patch_wls1030/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/u01/app/oracle/bea/patch_cie660/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/u01/app/oracle/bea/jdk160_05/lib/tools.jar:/u01/app/oracle/bea/wlserver_10.3/server/lib/weblogic_sp.jar:/u01/app/oracle/bea/wlserver_10.3/server/lib/weblogic.jar:/u01/app/oracle/bea/modules/features/weblogic.server.modules_10.3.0.0.jar:/u01/app/oracle/bea/wlserver_10.3/server/lib/webservices.jar:/u01/app/oracle/bea/modules/org.apache.ant_1.6.5/lib/ant-all.jar:/u01/app/oracle/bea/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar::/u01/app/oracle/bea/wlserver_10.3/common/eval/pointbase/lib/pbclient57.jar:/u01/app/oracle/bea/wlserver_10.3/server/lib/xqrl.jar::
PATH=/u01/app/oracle/bea/wlserver_10.3/server/bin:/u01/app/oracle/bea/modules/org.apache.ant_1.6.5/bin:/u01/app/oracle/bea/jdk160_05/jre/bin:/u01/app/oracle/bea/jdk160_05/bin:/u01/app/oracle/product/10.2.0/db_1/bin:/usr/sbin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://hostname:port/console *
starting weblogic with Java version:
java version "1.6.0_05"
Java(TM) SE Runtime Environment (build 1.6.0_05-b13)
Java HotSpot(TM) Client VM (build 10.0-b19, mixed mode)
Starting WLS with line:
/u01/app/oracle/bea/jdk160_05/bin/java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m -Xverify:none -da -Dplatform.home=/u01/app/oracle/bea/wlserver_10.3 -Dwls.home=/u01/app/oracle/bea/wlserver_10.3/server -Dweblogic.home=/u01/app/oracle/bea/wlserver_10.3/server -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=/u01/app/oracle/bea/patch_wlw1030/profiles/default/sysext_manifest_classpath:/u01/app/oracle/bea/patch_wls1030/profiles/default/sysext_manifest_classpath:/u01/app/oracle/bea/patch_cie660/profiles/default/sysext_manifest_classpath -Dweblogic.Name=AdminServer -Djava.security.policy=/u01/app/oracle/bea/wlserver_10.3/server/lib/weblogic.policy weblogic.Server
<May 25, 2009 2:23:51 PM PHT> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
/u01/app/oracle/bea/user_projects/domains/identitymanager/lib/log4j-1.2.8.jar:/u01/app/oracle/bea/user_projects/domains/identitymanager/lib/mbeantypes/XL10SecurityProviders.jar:/u01/app/oracle/bea/user_projects/domains/identitymanager/lib/nexaweb-common.jar>
<May 25, 2009 2:23:51 PM PHT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 10.0-b19 from Sun Microsystems Inc.>
<May 25, 2009 2:23:51 PM PHT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3 Fri Jul 25 16:30:05 EDT 2008 1137967 >
<May 25, 2009 2:23:52 PM PHT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<May 25, 2009 2:23:52 PM PHT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<May 25, 2009 2:23:52 PM PHT> <Notice> <Log Management> <BEA-170019> <The server log file /u01/app/oracle/bea/user_projects/domains/identitymanager/servers/AdminServer/logs/AdminServer.log is opened. All server side log events will be written to this file.>
<May 25, 2009 2:23:58 PM PHT> <Error> <Security> <BEA-090870> <The realm "myrealm" failed to be loaded: weblogic.security.service.SecurityServiceException: java.lang.NoClassDefFoundError: com/thortech/util/logging/Logger.
weblogic.security.service.SecurityServiceException: java.lang.NoClassDefFoundError: com/thortech/util/logging/Logger
at weblogic.security.service.CSSWLSDelegateImpl.initializeServiceEngine(Unknown Source)
at weblogic.security.service.CSSWLSDelegateImpl.initialize(Unknown Source)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.InitializeServiceEngine(Unknown Source)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(Unknown Source)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(Unknown Source)
Truncated. see log file for complete stacktrace
java.lang.NoClassDefFoundError: com/thortech/util/logging/Logger
at com.thortech.xl.security.wl.XellerateAuthenticationProviderImpl.<clinit>(XellerateAuthenticationProviderImpl.java:73)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:247)
at com.bea.common.security.internal.legacy.service.SecurityProviderImpl.init(SecurityProviderImpl.java:51)
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:363)
Truncated. see log file for complete stacktrace
java.lang.ClassNotFoundException: com.thortech.util.logging.Logger
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
Truncated. see log file for complete stacktrace
>
<May 25, 2009 2:23:58 PM PHT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<May 25, 2009 2:23:58 PM PHT> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
weblogic.security.service.SecurityServiceRuntimeException: [Security:090399]Security Services Unavailable
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(Unknown Source)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(Unknown Source)
at weblogic.security.service.SecurityServiceManager.initialize(Unknown Source)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
<May 25, 2009 2:23:58 PM PHT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<May 25, 2009 2:23:58 PM PHT> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<May 25, 2009 2:23:58 PM PHT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>

I had the same error while trying to start the weblogic admin server for my IDM domain to allow me configure OIM server and OIM Design Console on my Window 7 box. What I did were the following steps.
1. I changed to the IDM domain bin directory <MiddlewareHome>\user_projects\domains\idm1_domain\bin
2. I ran the secureWeblogic.bat file as administrator
3. I ran the setDomainEnv.cmd file as administrator
4. I ran the setSOADomainEnv.cmd file as administrator
5. Started my weblogic admin server and it worked.

Help understand Command in SIP Profile

Hi all,
Recently we're deploying the CUBE SIP service but there is one command for SIP profile cannot be understood by us. This is one command requested by the service provider but we would like to understand the meaning of this command.
voice class sip-profiles 1
request CANCEL sip-header Max-Forwards modify ".*" "User-Agent: CUBE"
We thought Max-Forwards should be modified to some number.
Please kindly help. Thank you.
Regards,
Gary

Garry,
In the CANCEL request, your ITSP wants to modify the max forwards header from a number to the string user0agent:CUBE. I am not sure why they want to do this since maximum forwards should be a numerical value. The sample trace below is an example of a a CANCEL method. You can see the max forwards header..this is what they are trying to modify
Sent:
CANCEL sip:[email protected]:5081 SIP/2.0
Via: SIP/2.0/UDP 10.105.40.74:5060;branch=z9hG4bK38996EB1EC
From: <sip:[email protected]>;tag=259B0918-3C6
To: <sip:[email protected]>
Date: Mon, 22 Sep 2014 10:29:55 GMT
Call-ID: [email protected]
CSeq: 101 CANCEL
Max-Forwards: 70
Timestamp: 1411381796
Reason: Q.850;cause=16
Content-Length: 0
According to the RFC 3261, your ITSP is wrong in attempting to change this to a value other than a number.
8.1.1.6 Max-Forwards
The Max-Forwards header field serves to limit the number of hops a request can transit on the way to its destination. It consists of an integer that is decremented by one at each hop. If the Max-Forwards value reaches 0 before the request reaches its destination, it will be rejected with a 483(Too Many Hops) error response. A UAC MUST insert a Max-Forwards header field into each request it originates with a value that SHOULD be 70. This number was chosen to be sufficiently large to guarantee that a request would not be dropped in any SIP network when there were no loops, but not so large as to consume proxy resources when a loop does occur. Lower values should be used with caution and only in networks where topologies are known by the UA.

Error: You must have at least 1 Easy Setup File?

I just upgraded from FCE 1.0.1 to FCE HD v3.0. I have Quicktime 7.4.5 & OS X 10.4.11
When I launch, it takes forever because it's trying to load all my audio plugins into it and then at the end of that I get this error message:
Unable to start Final Cut Express HD. You must have at least 1 Easy Setup file. Please re-install Final Cut Express HD and try again.
Since it takes so long to install and I've already done it twice now...to no avail mind you...I was wondering if a guru or enlightened person would fill me in with what's going on and what I might do about it?

You may as well get rid of everything as we don't know where the problem lies.
This says FCE 2 but it is for FCE 1.0.1 as well. Remember many of the FCE 3.0 and FCE 1.0.1 files will be the same/shared.
http://docs.info.apple.com/article.html?artnum=93690
When you reinstall, do not install FCE 1.0.1.
Simply install FCE 3.0 and you will be asked at some point for the FCE 1.0.1 serial number as well.

ABAP program issues..Unicode program "ITAB" must have the same structure?

Dear Expert,
I coded below code in se38, but system give below error message, could please kindly advie issue reason? Thanks!!
Error message: A line of "ITAB" and "LINE" are not mutually convertible. In a Unicode program "ITAB" must have the same structure layout as "LINE" independent of the length of a . Unicode character. Unicode character.
REPORT ZTEST_HIHIHI.
Data: begin of line,
num type i,
sqr type i,
end of line,
itab type standard table of line with key table_line.
Do 5 times.
line-num = sy-index.
line-sqr = sy-index ** 2.
append line to itab.
enddo.
loop at itab into line.
write: / line-num, line-sqr.
endloop.
clear itab.

Hello Hoo Laa,
This is because the way you have defined LINE, it is a structure & not a data type. Hence you are facing the issue
You have to change the data declaration to:
itab LIKE STANDARD TABLE OF line WITH KEY table_line.
BR,
Suhas

Network message format error. GET request must have a QUERY_STRING value

I have installed new Content Server 10gR on my laptop.
Web Server is : Apache 2.2.4
DB is : Oracle 10g (Standard Edition)
Platform : Windows
CS is up & running. I am able to login and browse through content store. But when I try to perform any type of Submit operation anywhere in CS Portal ( for example "Updating My Profile and clicking on Submit" ) I get following error:
"Network message format error. GET request must have a QUERY_STRING value (the CGI parameters on the URL) "
1. Does any one know why I am getting this ?
2. Is some configuration missing for Apache which connects Apache with CS ?
Below is the httpd.conf changes:
LoadModule IdcApacheAuth D:/oracle/ucm/idc/shared/os/win32/lib/IdcApache22Auth.dll
IdcUserDB idc "D:/oracle/ucm/idc/data/users/userdb.txt"
Alias /idc "D:/oracle/ucm/idc/weblayout"
<Location /idc>
Order allow,deny
Allow from all
DirectoryIndex portal.htm
IdcSecurity idc
</Location>
3. One things that I see that before hitting the Submit button the URL is:
http://delrpatha76669.sapient.com:8989/idc/idcplg/?IdcService=GET_DOC_PAGE&Action=GetTemplatePage&Page=HOME_PAGE&Auth=Internet
And after hitting Submit button on "My Profile" the URL becomes:
http://delrpatha76669.sapient.com:8989/idc/idcplg/
I guess part of URL gets truncated/missed etc and so we are getting this error ?
Any way to fix this ?
Edited by: user12188052 on Sep 21, 2010 10:10 AM

This issue is resolved.
Cause
- After installation when I started CS , I saw "D:\oracle\ucm\idc\weblayout\idcplg" folder missing error in logs. Reason why I created this "idcplg" folder inside "weblayout" folder was because I thought it was not created during installation. I created this folder & copied "idc_cgi_isapi.dll" this file into it.. This was the issue
Fix
- I deleted the folder "D:\oracle\ucm\idc\weblayout\idcplg" and everything started working fine now.

E71: error: SIP "profiles in same realm must have ...

Similar Messages

Maybe you are looking for