E71 - Three Network - External Email

Hi,
Hopefully someone can help me.
I have an E71 on 3 in the UK and NTL is my email provider.
The 3 website states that I cannot use the phone for external email and must use the browser but I can't work out how to do it.
The actual message on the site is:
"External POP3 mail can only be accessed from the browser and not from the actual mobile handset."
Regardless, I tried to set up my NTL email on the phone and did successfully set up pop3 incoming mail and was able to retrieve emails but as NTL blocks roaming SMTP I couldn't send emails from my email address.
I replaced the NTL SMTP server with 3's SMTP server and this worked but sent the emails from [email protected]
I then used the ‘reply-to’ setting in ‘email account’ | email settings | user settings | reply-to but the sent mail is still send from the 3mail.co.uk address.
Any help would be greatly appreciated on either masking my outgoing mail as my actual address or using the browser to use my mail.
(I know I could use NTL webmail – that’s the last resort!)
Thanks.
MT
Solved!
Go to Solution.

I have a 3 E71 but not NTL - I use mobileme & gmail. The gmail setup went fine and works well, but mobileme was just not happening..
What I've done - and this may be a possible solution for you is open a Nokia mail account (it's free). You add the details of your NTL email to the setup and it will then "push" your NTL mail to your phone. You can then try the reply to through the nokia software that gets installed on the E71...
It works well and has been updated recently to allow more than one email account to be "pushed" to your phone.
forgot to add link...!!!
https://email.nokia.com/
Message Edited by fusionloch on 14-Oct-2008 01:29 PM

Similar Messages

X200T mobile broadband setting for Three network

Hello all
I have recently downgraded my laptop (X200T) from Vista to XP, and overall I am very happy with the good old XP.
However, I am having a trouble with the mobile broadband.
I have got a SIM card for mobile broadband from Three network, and have been using it without any problems in my previous OS: Vista Business. However, since I downgraded my laptop to XP, I have not been able to use it through ThinkVantage Access Manager. I have tried to resolve this problem by editing WAN settings in the programme, but failed.
Has anyone else experienced and fixed the same problem? I would very much appreciate if you could share the solution with me.
Thanks in advance.

cwbaker wrote:
Hi. I am using a Galaxy S3 and I am on the THREE network. I can receive e-mails no problems but not send them.
Is there a seting I need to change? Basically, THREE have said this. Help please.
Do they support email forwarding via third party?
- Do they support outgoing email traffic via any other port other than Port 25 or 587, 465 or 486?
Hi. Welcome to the forums.
I assume you are referring to sending "three" emails via BTYahoo! ?
What error message are you receiving when trying to send ? Typically ISPs (probably as well as mobile type companies) prevent non connected users from using their mail servers. So in order to send "three" emails you need to go through address verification using your BTinternet email address. See my shortcuts, link below, option 0e
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures

Nokia E71 Manual Network selection Problems

HI
I have the E71 on the Three network and it allows roaming in this country (something thats usually locked off) to avoid roaming charges I went to change the phones network select option from Automatic to manual, I get the usual pop up to select the network I want to connect to but when I go back to the network options screen it shows as automatic and does indeed allow roaming. How do I actually change to manual network selection.
Cheers

I can't believe that Nokia have not resolved this problem.
The problem gives a direct influence on the cost of calls, which is very excessive.
I spent 3 hours on the phone to Three to try to resolve the problem and nothing worked. Tried removing sim card and putting it back in, factory reset and hard reset.
For a regular traveler this phone is a nightmare. Call charges can range from £0.25p to £1.50 and 0.12p to 0.25p. Also call charges may be applicable in the UK depending on your network provider.
Quite simply not fit for its purpose. A mobile phone by definition is "a hand-held mobile radiotelephone for use in an area divided into small sections, each with its own short-range transmitter/receiver provided by a specific network carrier".
Unfortunately the phone does not meet this definition. Under the Trade Descriptions Act of 1968 should be entitled to a refund as customers have been mislead by the sale of the handset. Also the phone directly misleads roaming customers.
Also under the Sale of Goods Act of 1979 the mobile phone should be "fit for purpose". Unfortunately the E71 is not fit for purpose as a mobile phone does not meet its definition and as a customer the network provider does not provide a fair service carried by the network. Most networks are contractually bound to do so.
If you have a problem with this phone please contact Nokia or your provider to try to resolve the problem and push the new firmware as soon as possible!

Nokia C7 - Three Network - Connection Failed - Cer...

Hi there Guys...
Recently updated my Nokia C7 to latest version of Nokia Belle (111.030.0609), Im on the Three UK network and noticed some issues with certain app and the latest versional to Nokia Social, updated from Nokia Suite.
The problem seems to effect apps that have a widget that can be displayed on the Home Screens... I have similar issues with a number of other apps like Accuweather, National Geographic and Sky Sports... I am sure there are more, but have removed them from my phone.
I just get "Failed Conections" or "Connection Unavailable" and the app will not load or open. Just to confirm I have tried been connected to my Wi-Fi and just using the internet signal from Three. I have a perfect signal and can use other apps over the internet without an issue, but the moment I open the above mentioned apps I just get the error and the apps are un-useable.
If I use Nokia Social that came with Belle and not update it, this seems to work, but the other apps don't.
Is this an issue just effecting Nokia C7's locked to the Three UK network (with its firmware) or other users too?
Does anyone know how to over come this?
I have tried re-installing the firmware numerous times, resetting and reverting back to factor settings and delting all data.
I have emailed Nokia Support and they haven't been very helpful, just telling me to do the above and will not confirm if there is an issue with this phone on the three network. They have then told me to visit a Nokia Support Centre, but this not an option, as I purchased the phone off eBay and the seller does not have the receipts to provide the Centre with proof of purchase.

I have this same problem, all was working fine until I updated things. Has anyone found a solution for this, I also reinstalled my phone back to basics and basically had nothing on it, still hasn't fixed the problem. I have tried using wifi, Three's mobile data etc to connect, and nothing. As previous person, I can connected to the internet through other apps and the web icon but not social AT ALL.
C'mon Nokia, sort it out!!

Setting up MX Record for External email Access

To All,
I'm having trouble getting mail sent from external users to email accounts setup on my internally hosted server.
I have setup my server in a Standard Configuration using the following format for my FQDN:
server.mydomain.com (not real name)
I have checked both Primary Zone and Reverse Zone and both check fine.
I can send and receive email, while connected within my local domain, between users I have setup on my server using the format:
[email protected]
I can send email from inside the network to an outside email account, but cannot receive email from any users outside.
I have POP, IMAP, and SMTP ports (110, 143, and 25, respectively) all forwarded to my server thru my AEBS.
Consulting the setup guides, I have found these references to editing the MX record to allow for external email access using the [email protected] format:
+"If you don’t want to use your server’s fully qualified DNS name for users’ email addresses, the+
+DNS service must also include an MX record for your server. For example, if your server’s DNS+
+name is myserver.example.com and you want to have email addresses like [email protected],+
+the DNS service needs an MX record for your server."+....from the Installation and Setup Worksheet, page 15.
also
+"If you want users to be able to send and receive mail over the Internet, make sure DNS+
+service is set up with the appropriate MX records for Mail service:+
+A. If you have an ISP that provides DNS service to your network, contact the ISP and+
+have the ISP set up MX records for you. Your ISP needs to know your mail server’s+
+DNS name (such as mail.example.com) and your server’s IP address."+...from the Mail Service Admin page 22.
My question is...how does the MX record need to be set up?
Like this?
10 @ mydomain.com
Thanks for your help,
Steve

Camelot,
Thanks for replying.
1) What format do you want your users' email address in? (e.g. [email protected], >[email protected], [email protected], etc.)
I want my users to have a [email protected] email address.
I set up an A record as you suggested:
mail.mydomain.com A 1.2.3.4
My MX record was setup:
mydomain.com 10 mail.mydomain.com
However, I am still getting returned email from outside users. They are getting the following error:
+This is an automatically generated Delivery Status Notification+
+Delivery to the following recipient failed permanently:+
[email protected]
+Technical details of permanent failure:+
+Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 554 554 5.7.1 <[email protected]>: Relay access denied (state 14).+
Checking the Server Logs for IMAP I am getting these errors:
+Jan 21 12:11:34 server imap[44121]: AOD: user opts: get attributes for user: user failed with error: -14479+
+Jan 21 12:25:18 server imap[44236]: AOD: user opts: get attributes for user: user failed with error: -14479+
+Jan 21 12:31:46 server imap[44473]: AOD: user opts: get attributes for user: user failed with error: -14479+
+Jan 21 12:32:49 server imap[44499]: AOD: crypt authentication error: authentication failed for user: username (-14090)+
+Jan 21 12:37:06 server imap[44598]: AOD: user opts: get attributes for user: user failed with error: -14479+
+Jan 21 12:49:39 server imap[44520]: AOD: user opts: get attributes for user: user failed with error: -14479+
+Jan 21 13:01:51 server imap[45049]: AOD: user opts: get attributes for user: user failed with error: -14479+
+Jan 21 13:11:58 server imap[385]: AOD: user opts: get attributes for user: user failed with error: -14479+
When I try and use an online MX Record checker to check the MX record, it says the mail.mydomain.com record is invalid.
It's not until I change my MX record back to:
+@ 10 mydomain.com+
will the MX record show valid.
Network Utility scans show the following with the MX record set to @ 10 mydomain.com:
++; <<>> DiG 9.4.2-P2 <<>> mydomain.com mx +multiline +nocomments +nocmd +noquestion +nostats search+
++;; global options: printcmd++
++wekrugs.com. 3600 IN SOA server.mydomain.com. admin.mydomain.com. (++
++ 2009011900 ; serial++
++ 86400 ; refresh (1 day)++
++ 3600 ; retry (1 hour)++
++ 604800 ; expire (1 week)++
++ 3600 ; minimum (1 hour)++
++ )++
If I have it set up the way you suggested, the Network Utility and MX Checker reports that the NameServers don't respond to the entered MX record name.
Thanks again for your help,
Steve

Scheduling a report to EXTERNAL email ID in BO XI R2

Hi ,
Is it possible to schedule reports to an external email ID in BO XI R2 outside our corporate network ?
We realise that BO XI R2 is no longer supported
Thanks !

Following SAP Notes can be helpful:
1201704 - ErrorSMTP_E_MAILBOX_UNAVAILABLE_2(550) when scheduling a
report to an email address
1539011 - SMTP_E_MAILBOX_UNAVAILABLE_2(550)

Email not getting send: Error message 'No delivery to external email id

Hi All,
Whenever i am trying to send mail to external address from Business Workplace (Tcode: SBWP), it initially sets the status of the mail as waiting with message 'Will be sent after server date:server time'. But after 6 hours, its status changes to error with message 'No delivery to <external email id>.
When i checked in error log (in SOST), it displays the following messages:
1. Document sent
2. Wait for Communications service
3. No delivery to <external email id> (after 6 hours from Document sent/Wait for communications service time)
Please suggest me how to resolve this issue.
Thanks in advance.
Regards,
Shradhanjali Mishra

Hi Shane,
Extremely sorry for the late reply.
I asked the BASIS team to fix the issue.. and i think they did some configuration as a result of which i am not getting any error msg now while sending email.
I guess you also need to check with your BASIS team to fix this issue.
Regards,
Shradhanjali

Reg : Issue for Sending of external email using SO_OBJECT_SEND

There is one issue while sending external email using SO_OBJECT_SEND functional module.
1. The body of the mail is also included as attachment.
I want to avoid the same.
Please anyone can give the solution.

hi check this example ,
Sending mail with attachment report in Background
Content Author: Fernando Faian
I have read the hint about "Sending mail with attachment report".
It's great, but how can I make this function work in background??
I had that needed last year too. See attachment a function group with two functions. The second one has that functionality to send email or fax (SAP office) with attachment objects in background job using SO_ATTACHMENT_INSERT function.
Pay attention because its working with output list from spool converted to pdf.
=================================================================================
z_send_email_fax_global
FUNCTION-POOL z_gfaian_mail_fax.            "MESSAGE-ID ..
WORK TABLE AREAS
TABLES: tsp01.
INTERNAL TABLES
DATA: lt_rec_tab LIKE STANDARD TABLE OF soos1 WITH HEADER LINE,
      lt_note_text   LIKE STANDARD TABLE OF soli WITH HEADER LINE,
      lt_attachments LIKE STANDARD TABLE OF sood5 WITH HEADER LINE.
DATA: lt_objcont LIKE STANDARD TABLE OF soli WITH HEADER LINE,
      lt_objhead LIKE STANDARD TABLE OF soli WITH HEADER LINE.
DATA: pdf_format LIKE STANDARD TABLE OF tline WITH HEADER LINE.
TYPES: BEGIN OF y_files,
       file(60) TYPE c,
       END OF y_files.
DATA: lt_files TYPE STANDARD TABLE OF y_files WITH HEADER LINE.
DATA: l_objcont     LIKE soli OCCURS 0 WITH HEADER LINE.
DATA: l_objhead     LIKE soli OCCURS 0 WITH HEADER LINE.
STRUCTURES
DATA: folder_id      LIKE soodk,
      object_id      LIKE soodk,
      link_folder_id LIKE soodk,
      g_document     LIKE sood4,
     g_header_data LIKE sood2,
      g_folmem_data LIKE sofm2,
      g_header_data LIKE sood2,
      g_receive_data LIKE soos6,
      g_ref_document LIKE sood4,
      g_new_parent   LIKE soodk,
      l_folder_id    LIKE sofdk,
      v_email(50).
DATA: hd_dat like sood1.
VARIABLES
DATA: client LIKE tst01-dclient,
      name    LIKE tst01-dname,
      objtype LIKE rststype-type,
      type    LIKE rststype-type.
DATA: numbytes TYPE i,
      arc_idx LIKE toa_dara,
      pdfspoolid LIKE tsp01-rqident,
      jobname LIKE tbtcjob-jobname,
      jobcount LIKE tbtcjob-jobcount,
      is_otf.
DATA: outbox_flag LIKE sonv-flag VALUE 'X',
      store_flag LIKE sonv-flag,
      delete_flag LIKE sonv-flag,
      owner       LIKE soud-usrnam,
      on          LIKE sonv-flag VALUE 'X',
      sent_to_all LIKE sonv-flag,
      g_authority LIKE sofa-usracc,
      w_objdes    LIKE sood4-objdes.
DATA: c_file LIKE rlgrap-filename,
      n_spool(6) TYPE n.
DATA: cancel.
DATA: desired_type LIKE sood-objtp,
      real_type LIKE sood-objtp,
      attach_type LIKE sood-objtp,
      otf LIKE sood-objtp VALUE 'OTF', " SAPscript Ausgabeformat
      ali LIKE sood-objtp VALUE 'ALI'. " ABAP lists
CONSTANTS
CONSTANTS: ou_fol LIKE sofh-folrg              VALUE 'O',
           c_objtp    LIKE g_document-objtp    VALUE 'RAW',
           c_file_ext LIKE g_document-file_ext VALUE 'TXT'.
=================================================================================
z_send_email_fax2
FUNCTION z_faian_mail_fax2.
""Interface local:
*" IMPORTING
*"     REFERENCE(SRC_SPOOLID) LIKE TSP01-RQIDENT
*"     REFERENCE(FAX_MAIL_NUMBER) TYPE SO_NAME
*"     REFERENCE(HEADER_MAIL) TYPE SO_OBJ_DES
*"     REFERENCE(OBJECT_TYPE) TYPE SO_ESCAPE
*" TABLES
*"      LT_BODY_EMAIL STRUCTURE SOLI
*" EXCEPTIONS
*"      ERR_NO_ABAP_SPOOLJOB
Fist part: Verify if the spool really exists
SELECT SINGLE * FROM tsp01 WHERE rqident = src_spoolid.
IF sy-subrc NE 0.
    RAISE err_no_abap_spooljob. "doesn't exist
ELSE.
    client = tsp01-rqclient.
    name   = tsp01-rqo1name.
    CALL FUNCTION 'RSTS_GET_ATTRIBUTES'
         EXPORTING
              authority     = 'SP01'
              client        = client
              name          = name
              part          = 1
         IMPORTING
              type          = type
              objtype       = objtype
         EXCEPTIONS
              fb_error      = 1
              fb_rsts_other = 2
              no_object     = 3
              no_permission = 4
              OTHERS        = 5.
    IF objtype(3) = 'OTF'.
      desired_type = otf.
    ELSE.
      desired_type = ali.
    ENDIF.
    CALL FUNCTION 'RSPO_RETURN_SPOOLJOB'
         EXPORTING
              rqident              = src_spoolid
              desired_type         = desired_type
         IMPORTING
              real_type            = real_type
         TABLES
              buffer               = l_objcont
         EXCEPTIONS
              no_such_job          = 14
              type_no_match        = 94
              job_contains_no_data = 54
              no_permission        = 21
              can_not_access       = 21
              read_error           = 54.
    IF sy-subrc EQ 0.
      attach_type = real_type.
    ENDIF.
    CALL FUNCTION 'SO_FOLDER_ROOT_ID_GET'
         EXPORTING
              owner     = sy-uname
              region    = ou_fol
         IMPORTING
              folder_id = l_folder_id
         EXCEPTIONS
              OTHERS    = 5.
fill out informations about the header of the email
    CLEAR: g_document.
    g_document-foltp     = l_folder_id-foltp.
    g_document-folyr     = l_folder_id-folyr.
    g_document-folno     = l_folder_id-folno.
    g_document-objtp     = c_objtp.
    g_document-objdes    = header_mail.
    g_document-file_ext = c_file_ext.
    g_header_data-objdes    = header_mail.
    CALL FUNCTION 'SO_DOCUMENT_REPOSITORY_MANAGER'
         EXPORTING
              method      = 'SAVE'
              office_user = sy-uname
         IMPORTING
              authority   = g_authority
         TABLES
              objcont     = lt_body_email
              attachments = lt_attachments
         CHANGING
              document    = g_document
              header_data = g_header_data
         EXCEPTIONS
              OTHERS      = 1.
    folder_id-objtp = l_folder_id-foltp.
    folder_id-objyr = l_folder_id-folyr.
    folder_id-objno = l_folder_id-folno.
    object_id-objtp = c_objtp.
    object_id-objyr = g_document-objyr.
    object_id-objno = g_document-objno.
    link_folder_id-objtp = l_folder_id-foltp.
    link_folder_id-objyr = l_folder_id-folyr.
    link_folder_id-objno = l_folder_id-folno.
    REFRESH lt_rec_tab.
   CLEAR lt_rec_tab.
   lt_rec_tab-sel        = 'X'.
   lt_rec_tab-recesc     = object_type.   "This field for FAX/MAIL
   lt_rec_tab-recnam     = 'U-'.
   lt_rec_tab-deliver    = 'X'.
   lt_rec_tab-not_deli   = 'X'.
   lt_rec_tab-read       = 'X'.
   lt_rec_tab-mailstatus = 'E'.
   lt_rec_tab-adr_name   = fax_mail_number.
   lt_rec_tab-sortfield = fax_mail_number.
   lt_rec_tab-recextnam = fax_mail_number.
   lt_rec_tab-sortclass = '5'.
   APPEND lt_rec_tab.
      lt_rec_tab-recextnam = fax_mail_number.
      lt_rec_tab-recesc = object_type.
      lt_rec_tab-sndart = 'INT'.
      lt_rec_tab-sndpri = 1.
      APPEND lt_rec_tab.
    lt_files-file = c_file.
    APPEND lt_files.
begin of insertion by faianf01
    hd_dat-objdes = header_mail.
    CALL FUNCTION 'SO_ATTACHMENT_INSERT'
         EXPORTING
              object_id                  = object_id
              attach_type                = attach_type
              object_hd_change           = hd_dat
              owner                      = sy-uname
         TABLES
              objcont                    = l_objcont
              objhead                    = l_objhead
         EXCEPTIONS
              active_user_not_exist      = 35
              communication_failure      = 71
              object_type_not_exist      = 17
              operation_no_authorization = 21
              owner_not_exist            = 22
              parameter_error            = 23
              substitute_not_active      = 31
              substitute_not_defined     = 32
              system_failure             = 72
              x_error                    = 1000.
    IF sy-subrc > 0.
    ENDIF.
end of insertion by faianf01
send email from SAPOFFICE
    CALL FUNCTION 'SO_OBJECT_SEND'
         EXPORTING
              folder_id                  = folder_id
              object_id                  = object_id
              outbox_flag                = outbox_flag
              link_folder_id             = link_folder_id
              owner                      = sy-uname
             check_send_authority       = 'X'
         TABLES
              receivers                  = lt_rec_tab
             note_text                  = lt_note_text
         EXCEPTIONS
              active_user_not_exist      = 35
              communication_failure      = 71
              component_not_available    = 1
              folder_no_authorization    = 5
              folder_not_exist           = 6
              forwarder_not_exist        = 8
              object_no_authorization    = 13
              object_not_exist           = 14
              object_not_sent            = 15
              operation_no_authorization = 21
              owner_not_exist            = 22
              parameter_error            = 23
              substitute_not_active      = 31
              substitute_not_defined     = 32
              system_failure             = 72
              too_much_receivers         = 73
              user_not_exist             = 35.
ENDIF.
ENDFUNCTION.
=================================================================================
z_send_email_fax
FUNCTION ZCBFS_SEND_MAIL.
""Interface local:
*" IMPORTING
*"     REFERENCE(SRC_SPOOLID) LIKE TSP01-RQIDENT
*"     REFERENCE(HEADER_MAIL) TYPE SO_OBJ_DES
*" TABLES
*"      LIST_FAX_MAIL_NUMBER STRUCTURE SOLI
*" EXCEPTIONS
*"      ERR_NO_ABAP_SPOOLJOB
DATA: vg_achou(1) TYPE n.
Fist part: Verify if the spool really exists
vg_achou = 1.
DO 60 TIMES.
    SELECT SINGLE * FROM tsp01 WHERE rqident = src_spoolid.
    IF sy-subrc IS INITIAL.
      CLEAR vg_achou.
      EXIT.
    ELSE.
      WAIT UP TO 1 SECONDS.
    ENDIF.
ENDDO.
IF vg_achou = 1.
    RAISE err_no_abap_spooljob. "doesn't exist
ENDIF.
client = tsp01-rqclient.
name   = tsp01-rqo1name.
CALL FUNCTION 'RSTS_GET_ATTRIBUTES'
       EXPORTING
            authority     = 'SP01'
            client        = client
            name          = name
            part          = 1
       IMPORTING
            type          = type
            objtype       = objtype
       EXCEPTIONS
            fb_error      = 1
            fb_rsts_other = 2
            no_object     = 3
            no_permission = 4
            OTHERS        = 5.
IF objtype(3) = 'OTF'.
    desired_type = otf.
ELSE.
    desired_type = ali.
ENDIF.
CALL FUNCTION 'RSPO_RETURN_SPOOLJOB'
       EXPORTING
            rqident              = src_spoolid
            desired_type         = desired_type
       IMPORTING
            real_type            = real_type
       TABLES
            buffer               = l_objcont
       EXCEPTIONS
            no_such_job          = 14
            type_no_match        = 94
            job_contains_no_data = 54
            no_permission        = 21
            can_not_access       = 21
            read_error           = 54.
IF sy-subrc EQ 0.
    attach_type = real_type.
ENDIF.
CALL FUNCTION 'SO_FOLDER_ROOT_ID_GET'
       EXPORTING
            owner     = sy-uname
            region    = ou_fol
       IMPORTING
            folder_id = l_folder_id
       EXCEPTIONS
            OTHERS    = 5.
fill out informations about the header of the email
CLEAR: g_document.
g_document-foltp     = l_folder_id-foltp.
g_document-folyr     = l_folder_id-folyr.
g_document-folno     = l_folder_id-folno.
g_document-objtp     = c_objtp.
g_document-objdes    = header_mail.
g_document-file_ext = c_file_ext.
g_header_data-objdes    = header_mail.
CALL FUNCTION 'SO_DOCUMENT_REPOSITORY_MANAGER'
       EXPORTING
            method      = 'SAVE'
            office_user = sy-uname
       IMPORTING
            authority   = g_authority
       TABLES
            attachments = lt_attachments
       CHANGING
            document    = g_document
            header_data = g_header_data
       EXCEPTIONS
            OTHERS      = 1.
folder_id-objtp = l_folder_id-foltp.
folder_id-objyr = l_folder_id-folyr.
folder_id-objno = l_folder_id-folno.
object_id-objtp = c_objtp.
object_id-objyr = g_document-objyr.
object_id-objno = g_document-objno.
link_folder_id-objtp = l_folder_id-foltp.
link_folder_id-objyr = l_folder_id-folyr.
link_folder_id-objno = l_folder_id-folno.
REFRESH lt_rec_tab.
LOOP AT LIST_FAX_MAIL_NUMBER.
    lt_rec_tab-recextnam = LIST_FAX_MAIL_NUMBER-LINE.
    lt_rec_tab-recesc = 'U'.
    lt_rec_tab-sndart = 'INT'.
    lt_rec_tab-sndpri = 1.
    APPEND lt_rec_tab.
ENDLOOP.
lt_files-file = c_file.
APPEND lt_files.
hd_dat-objdes = header_mail.
CALL FUNCTION 'SO_ATTACHMENT_INSERT'
       EXPORTING
            object_id                  = object_id
            attach_type                = attach_type
            object_hd_change           = hd_dat
            owner                      = sy-uname
       TABLES
            objcont                    = l_objcont
            objhead                    = l_objhead
       EXCEPTIONS
            active_user_not_exist      = 35
            communication_failure      = 71
            object_type_not_exist      = 17
            operation_no_authorization = 21
            owner_not_exist            = 22
            parameter_error            = 23
            substitute_not_active      = 31
            substitute_not_defined     = 32
            system_failure             = 72
            x_error                    = 1000.
IF sy-subrc > 0.
ENDIF.
send email from SAPOFFICE
CALL FUNCTION 'SO_OBJECT_SEND'
       EXPORTING
            folder_id                  = folder_id
            object_id                  = object_id
            outbox_flag                = outbox_flag
            link_folder_id             = link_folder_id
            owner                      = sy-uname
       TABLES
            receivers                  = lt_rec_tab
            note_text                  = lt_note_text
       EXCEPTIONS
            active_user_not_exist      = 35
            communication_failure      = 71
            component_not_available    = 1
            folder_no_authorization    = 5
            folder_not_exist           = 6
            forwarder_not_exist        = 8
            object_no_authorization    = 13
            object_not_exist           = 14
            object_not_sent            = 15
            operation_no_authorization = 21
            owner_not_exist            = 22
            parameter_error            = 23
            substitute_not_active      = 31
            substitute_not_defined     = 32
            system_failure             = 72
            too_much_receivers         = 73
            user_not_exist             = 35.
ENDFUNCTION.
=================================================================================
regards,
venkat.

Send Vendor Balance confirmations report output (F.18) to External email ID

Dear Friends.
I have following requirement
Our Client requirement is to send Vendor Balance confirmations report output (Tcode F.18) to external email ID of vendor.
So please guide accordingly.
I have done BASIS Settings for SMTP (Tcode SCOT, RZ10) and Through SAP office using BASIS consultant and i can able to send sample test mail to external email ID through SAP Office (tcode SO00)
I will be thankful if anyone gives me exact solution.
Thanks & Regards
Suyog

Hi,
You can craete Background Job and send Mail.
e.g.
Goto->SM36->JOBWIZARD ( Create the Job and specify the Spool List Recipients ).
After Creating the job.
Again SM36->Start Condition ( You can create here when to send the mail ).
And Release it.
Be sure that your BASIS guy has done the required settings for Outgoing Mail.
Please check in SCOT.
Affable
Arbind
Edited by: Arbind Prasad on Jan 23, 2010 3:07 PM

Unable to send to external email recipients - Multi Tenant Exchange 2013 - MultiRole servers in DAG

Greetings all, I hope someone can help.
I have created a Exchange 2013 multi-tenant organization, with two servers, both multi-role - CAS and Mailbox roles.
Internal mail flow is fine (external email addresses can send to the domain).
External firewall port forwards ports 443 and 25 to the Internal DAG IP address.
There are two multi-role Exchange servers that are members of the DAG.
I am able to connect to OWA and ECP via https://externalIP/OWA and https://alias.domain.com/OWA
No SSL certificates have been purchased or installed yet.
Exchange URLs have not been changed since default configuration at install.
OWA and ECP works both internal and external.
External DNS works with SPF and PTR records correctly configured
Exchange RCA - Send test only fails with one Spam Listing (this Blacklist provider now flags all domains and you cannot ask to be removed)
Send Connectors are the default ones created during install. Receive connector is standard configuration with - * -
When sending email to an external address, I receive a failure notice
ServerName.test.corp.int gave this error:
Unable to relay
Your message wasn't delivered due to a permission or security issue. It may have been rejected by a moderator, the address may only accept email from certain senders, or another restriction may be preventing delivery.
More Info -
ServerName.test.corp.int
Remote Server returned '550 5.7.1 Unable to relay'
I have been troubleshooting this for many hours with no progress.
I have created new Send Connectors for the server that is advising that it is unable to relay, but they have all failed.
I have tried setting the Internal IP address for Exhange Server 1 (Exchange Server 2 reports failure), with most combinations of Security (Anonymous, Exchange Users, etc).
I have also tried with the IP range 192.168.11.0/24 to allow the whole the subnet, I still receive the unable to relay failure notice.
I have tried this guide - hxxps://glazenbakje.wordpress.com/2012/12/30/exchange-2013-how-to-configure-an-internal-relay-connector/ - with different combinations, still no resolution.
I am at a loss as to why I can't send out with the default configuration. I would assume that email would flow out without any changes, but this does not happen.
Can someone please assist before I lose my sanity.
Thanks in advance,
Terry

Greetings all, I hope someone can help.
I have created a Exchange 2013 multi-tenant organization, with two servers, both multi-role - CAS and Mailbox roles.
Internal mail flow is fine.
Incoming mail from external senders is also fine. -
external email addresses can send to the domain).
External firewall port forwards ports 443 and 25 to the Internal DAG IP address.
There are two multi-role Exchange servers that are members of the DAG.
I am able to connect to OWA and ECP via https://externalIP/OWA and https://alias.domain.com/OWA
No SSL certificates have been purchased or installed yet.
Exchange URLs have not been changed since default configuration at install.
OWA and ECP works both internal and external.
External DNS works with SPF and PTR records correctly configured
Exchange RCA - Send test only fails with one Spam Listing (this Blacklist provider now flags all domains and you cannot ask to be removed)
Receive Connectors are the default ones created during install. Send connector is standard configuration with - * -
When sending email to an external address, I receive a failure notice
ServerName.test.corp.int gave this error:
Unable to relay
Your message wasn't delivered due to a permission or security issue. It may have been rejected by a moderator, the address may only accept email from certain senders, or another restriction may be preventing delivery.
More Info -
ServerName.test.corp.int
Remote Server returned '550 5.7.1 Unable to relay'
I have been troubleshooting this for several days with no progress.
I have created new Receive Connectors for the server that is advising that it is unable to relay, but they have all failed.
I have tried setting the Internal IP address for Exhange Server 1 (Exchange Server 2 reports failure), with most combinations of Security (Anonymous, Exchange Users, etc).
I have also tried with the IP range 192.168.11.0/24 to allow the whole the subnet, I still receive the unable to relay failure notice.
I have tried this guide - hxxps://glazenbakje.wordpress.com/2012/12/30/exchange-2013-how-to-configure-an-internal-relay-connector/ - with different combinations, still no resolution.
Even more info - Further troubleshooting -
I found my one of my Exchange servers had an extra NIC. I have since added a second NIC to the other server, so now both Exchange servers have dual NICs. I removed the DAG cleanly and recreated the DAG from scratch, using this link -
hxxp://careexchange.in/how-to-create-a-database-availability-group-in-exchange-2013/
The issue still exists, even with a newly created DAG. I also found that the Tenant Address Books were not 'applied'. I applied them but still no resolution
I think the issue is related to multi-tenant configuration even though the error says that it can't relay. The unable to relay message can appear when sending from a domain that the Organization does not support. Like trying to email as [email protected]
when you domain name is apple.com - But through extensive research I still can't resolve the issue.
Can someone please assist before I lose my sanity.
Thanks in advance,
Terry

Support Desk Message Creation in SOLUTION MANAGER through External Emails

Hello Experts,
                    I am a ABAP Developer , as mentioned in subject, my part is to Create support desk message in solution manager,through external Emails like outlook Express . To do this task i am in need of more information about some componenets which are used in solution manager support desk Message.
      My Doubts are,
1) What is the use of Ibasecomponent in Message Creation?
2) What if the ibasecomponent is mentioned as a defaut value ' 24 ' ( i.e is the ibasecomponent for solution manager - support desk ) ?
3) To track the system from which the message is created , is ibase required or the SAP component will give those information?
     If anyone has already worked with this subject, please give me some suggestions ASAP.
Thanks in Advance,
Mohana

Hello Mohana,
Let see if I can explain this well:
1) What is the use of Ibasecomponent in Message Creation?
When you define a Solution in the SOLMAN, you need to update your Ibase
Edit->Initial Data transfer for Ibase
This create a tree structure in the ibase IB52, as you can see in the attachment.
You get a componet number for SID-Client
You can configure the SOLMAN in a way that when a message arrives from
<System ID> <Installation Number> <Client> <User Name>
this is what solman knows from a message comming from a satellite, them you
know directly from which component/ibase the message has been received.
This is important data, the component/ibase, for reporting issue, for assigning this component to a sold-to-party (being in IB52, left tree, select a system and go to Goto->Partner you can assign a Sold-to party BP there for example)
2) What if the ibasecomponent is mentioned as a defaut value ' 24 '
By default the SOLMAN system has a Intalled base 01 already created for being used and maintained "automatically":
being in dswp, solution : Edit->Initial Data transfer for Ibase
If not you msut maintain the ibase manually from IB52, this is also possible.
The Ibase 01 is a prconfigured iBase for being used for the SOLMAN application.
Tink that the SOLMAN system is built up a CRM system, so the IBase is CRM matter. SOLMAN is only using some CRM applications to build the Service Desk scenario for example.
I3) To track the system from which the message is created , is ibase required or the SAP component will give those information?
Ibase is required
Hope this helps,
Dolores

Giving users control of their own distribution list control to add or remove external email addresses from their list

We are a Exchange 2010 SP3 shop, we have distribution groups (with over 200 email addresses ) from another email system which has only external email addresses (i.e [email protected] [email protected] and so on …..)
We want to import these groups into exchange. we called microsoft, they said create mail contacts for each address and put those in a Distribution Group. I know this will work.
Our goal is to have the user create / maintain / add / remove external their own email addresses (Not the IT department)
There must be many companies whose requirements match ours. Are there third party tools that would handle creation of distribution list?
Any constructive advice would be greatly appreciated ! THank you

I wouldn't give the ability to create contacts to everyone in the environment because it will become mess at some point of time and IT will have to jump to control it
anyway so why don’t from the start...
I would give this to certain people like Leads or Managers of the groups under certain IT Policy so it will be still under control and people
will think before asking their superior to create them and someone gets responsibility to manage these contacts...
Though here is the more specific article on how to delegate creating and editing contacts...
Creating RBAC Role To Delegate
Editing Contacts
Blog |
Get Your Exchange Powershell Tip of the Day from here

How to send external email of a Purchase Order

Hello,
I have to send an external email (pdf attachment) of a Purchase Order.
I use the standard sap program: /SMB40/FM06P and the smartform: /SMB40/MMPO_L.
Within transaction NACE I used the following entries:
Medium: 5 (External Send), Program: /SMB40/FM06P, Form routine: ENTRY NEU and Smartform: /SMB40/MMPO_L.
After running transaction ME22n (messages: External Send) I got the following error-messages in processing log:
- Please maintain an output device in your user master data.
- Archiving format not equal to PDF.
Please, can someone help me to solve this problem.
Regards,
Rajesh

hi
U need to write the code to convert the smartform to PDF using FM Convert_otf and also for sending mail
The standard program has to be copied to Z and write ur code..to perform u requirements
Check the below links
SO_NEW_DOCUMENT_ATT_SEND_API1
http://www.sapdevelopment.co.uk/reporting/rep_spooltopdf.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8cd6adbb-0301-0010-39ba-938c601d5db9
Email Invoices to customer as a PDF attachment
surya

SharePoint Workflow doesn't send notifications to External Email address when Trusted Identity Provider enabled.

SharePoint Workflow send the notification to External email address fine but do not work when Trusted Identity Provider/SSO feature Checked. Please Advice!

Hi,
I am trying to involve someone familiar with this topic to further look at this issue.
Regards,
Rebecca
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Rebecca Tu
TechNet Community Support

Receiver Mail Adapter with external Email-Provider

Hi everyone,
I have implemendet an Scenario with a receiver Mail Adapter. With using the SAP-Mail-Server it works fine.
Now I want to use an external Email Provider like GMX or yahoo. But the Parameter e.g. smtp://mail.gmx.net does not work.
Is this generally with an external Email Provider possible?
Thanks in advice
Christoph

Hi,
of course it is, but:
your XI has to see the external provider = opened ports
Regards,
michal

E71 - Three Network - External Email

Similar Messages

Maybe you are looking for