How to validate with CS5?

Hi all,
I have Adobe Dreamweaver CS5 which means the Validator is deprecated for HTML pages or sites.
I know it's back as a W3C Validator in CS5.5, but I have to do with 5.
Any ideas on how I can validate my code within CS5?
This is a professional environment, so freeware, unofficial add-ons or external app are not an option.
Thanks & Regards.

It is possible to have a multi-lingual website with a variety of page structures (like calendars, shopping pages, contact forms) with just a single "html" page and a small set of includes. In fact, most of the websites I build are this way, though a few have as many as six html pages (actually PHP pages).
My point is that without knowing anything about your help system, in all likelihood is is made the wrong way. 700 pages--that sounds like a site from 1998! Multiple languages can be handled in the database, so that you have a 'page' table that contains all the non-language-specific fields, and a page_content table that contains the language-specific fields.
You say it is a help system, not a website, but even if you are unable to use PHP, ASP, and a database, there would have to be a better way.

Similar Messages

How do I convert a file into inx with cs5.5?

Hello,
How do I convert a file in indesign cs5.5 into the interchange format?
Thanks for your answers

A complete review can be found here, but basically, you can't. CS4 was the last version that was able to generate INX - the format was replaced with IDML. You must export IDML with CS5.5, open that IDML in CS4, then export INX from CS4.
Why do you need INX? If it's for someone with CS3, then that person may not get a useable file, if any features introduced after CS3 were used in the CS5.5 document.

How does one transfer CS5 actions for use with CS6?

CS6 installation, which was uneventful, has transferred none of my actions from my copy of CS5. The CS5 actions are located in the actions folder of the APPLICATION/PHOTOSHOP CS5/PRESETS/ACTIONS. The "actions" folder in application support/adobe in my library is empty, and has always been so.
Only the CS6 default actions are located in the same folder for CS6.
I use imac i7, lion.
Note that i also have CS3 and CS4 on my machine. This due to recent upgrade to CS5 and recent upgrade to LION, and my general paranoia.
Must i load each action into CS6, one at a time?
thanks to any and all.
vince

Re: how does one transfer CS5 actions for use with CS6?
On a Mac - There are multiple ways to do this. I have done them both ways. In order to do this you need to know where you have your actions stored, and you can move them all at once if you have them stored in the same location.
1. You can load an action ONE AT TIME into your actions palette by:
     A. Open up the action palette and click on the little arrow with 4 little horizontal lines next to it on the upper right corner of the actions palette.
     B. Select "Load Actions" and a Finder window will open up and you can search your computer through this window for your actions.
     C. Click on the action from the Finder window then click 'Open' at the bottom right of the finder window.
     D. To save these so that they appear every time you open up your actions palette, go back to the little arrow at the top right of the actions palette and when the drop down window opens- click on 'Save Actions'. It will select the location where the          actions are currently stored as the place to save them. If you want to change that path, you can do it at this time in the little path window. I just leave it, since I keep all my actions stored in the same file.
2. TO MOVE MULTIPLE ACTION SETS AT ONCE
     A. Open up CS6 (or CS5) and move the Photoshop workspace it to the right side of your computer screen so you can see your desktop on the left side.
     B. Open up your Finder search window from your dock (the square blue head icon thingy for those who are new to photoshop). Move this to the left side of your screen so you can see the Photoshop work space on the right and the Finder window          on the left. In the Finder window, navigate to the file where all your actions are stored, select all the actions in the file (command+A will select everything in the file if you are actively inside the open file) or you can select multiple files           individually by continuously holding down the command key and clicking on the different actions you want to move.
     C. With the Photoshop workspace visible on the right, and the actions palette open so you can see that the actions actually transferred - In the Finder window, click the selected actions you want to load and drag them over to the Photoshop           workspace. I did this without an image open, I just dragged them onto the empty workspace. The actions should all appear immediately in the actions palette that is open.
     D. To save these so that they appear every time you open up your actions palette, go back to the little arrow at the top right of the actions palette and when the drop down window opens click on 'Save Actions'. It will select the location where the           actions are stored as the place to save them. If you want to change that path, you can do it at this time in the little path window. I just leave it, since I keep all my actions stored in the same file.
I hope this helps.
and I hope there are no typos.

How to validate xml file with XSD schema ?? in JDK1.4.2

How to validate xml file with XSD schema ?? in JDK1.4.2
i dont want to use new Xerec Jar ...
Suggest option ...

Please do not double-post. http://forum.java.sun.com/thread.jspa?threadID=5134447&tstart=0
Then use Stax (Woodstock) or Saxon.
- Saish

How does the mac mini perform with cs5

Just curious
How does the Intel HD Graphics 4000 in the new mac mini perform with cs5 photoshop cs6 photoshop?
thanks
Ted

Jeff, I appreciate your comment, so you haven't had any problem with using the painttools in CS 6 photoshop and the 3d type etc, in other words all the features that CS6 photoshop has.
I was thinking about buying the mac mini but was concerned how it works with CS 5 (which I have) I will have to take another look at the MiniMac server with the 3000 card. I do a lot of Digital Painting primarily Painter 12.2 but and would like to use the Painter brushes in CS 5 ( have not upgraded to CS 6.) My Imac is 6 years old and really is not fast enough.
Thanks for replying
Ted

How to validate input fields as the user is filling up a form with jQuery?

Hello EA friends.
Someone has experimented on how to validate input fields as the user is filling up a form with jQuery?, if the field is numeric and insert an A for example, an alert appears showing "insert a number" or not allowed to enter anything until a number is entered.
Thanks and regards.
Fer

Hi Sudeshna.
Sorry for not responding on time, how can I be included in this code?
sym.setVariable("typeActivity", "input")
var Element_1=document.createElement(typeActivity);
$(Element_1).css({"text-align": "center"});
//Answer
sym.setVariable("Answer_1", "4");
sym.$("box_1").append(Element_1)
This code is on my creationComplete and it works fine.
Would greatly appreciate your help.
Regards.
Fer García

How to validate the phone using Javascript with regularexpression

Hi ,
I wanted to validate the phone no with java script regular expression in Sun IDM Xpress code.
I have written the code like
<script>
var bolean = testStr.match(\d{3}-\d{3}-\d{4});
</script>
But it not validating and giving the "undefined: illegal character (; line 1)"
Can any body help me how to validate phone no in the java script regular expression in Sun IDM.
Thanks in advance.
Regards,
Ranjan

create a javascript rule that include the regular expression validation and call that rule from the filed validation section passing the field value.
S.

How to validate an XML file with XSD Schema on JDK 1.4

Hi
I'm looking for samples how to validate xml files with xsd schema using jsdk 1.4
Thank you.

This is how.
import javax.xml.parsers.DocumentBuilder;
import javax.xml.parsers.DocumentBuilderFactory;
import javax.xml.transform.dom.DOMResult;
import javax.xml.transform.dom.DOMSource;
import javax.xml.validation.Schema;
import javax.xml.validation.SchemaFactory;
import javax.xml.validation.Validator;
DocumentBuilderFactory dbfac = DocumentBuilderFactory.newInstance();
dbfac.setNamespaceAware(true);
SchemaFactory factory1 = SchemaFactory
.newInstance("http://www.w3.org/2001/XMLSchema");
Schema schema = factory1.newSchema(new File("person.xsd"));
dbfac.setSchema(schema);
DocumentBuilder dbparser1 = dbfac.newDocumentBuilder();
Document doc1 = dbparser1.parse(new File("person.xml"));
Validator validator1 = schema.newValidator();
DOMSource dm1 = new DOMSource(doc1);
DOMResult domresult1 = new DOMResult();
validator1.validate(dm1, domresult1);

File saved as .5 file type with CS5, How to Open in CS5

I've been working on a certificate and i saved it without looking at the file type. For some reason it set the file type to (.5). What is that? Is there any way I can open it again in CS5? Is there a file converter I could use. I just need to basically open the file agian in CS5 so I can continue to edit the certificate. I have tried opening the file with CS5 and CS6 and I get this message:
"Could not complete your request because it is not the right kind of document."
Thanks!

That's the problem I saved it in Photoshop CS5 and It wont let me open it in that. The message:
"Could not complete your request because it is not the right kind of document."
Pops up when i try to open it with Photoshop.

How to validate an XML with its XSD in jdk1.4.2_09?

Hi all,
Kindly Tell me how to validate an Xml against an XSD in JDK1.4.2_09....
I was able to do it in jdk1.5 using the Validation class available in java.xml.validation package...
But the Task for me is to do in jdk1.4.2 since my application server runs on jdk1.4.2... changin to jdk1.5 will result in failure of main application...
sample code will be useful...
thanks in advance.
Regards,
Sundararamaprasad.

HI,
Thanks for the suggestion.... The Thing is when i compiled and executre my code it really got execute well when i ran it in the Command Prompt after settiongup appropriate classpath and path... but when i executed the same thing in the server it did not get executed though the application server also run on top of the same JDk.....I've check it out..anyhow the link gave me a very good learning...Thanks for the valuable suggestion..... :)
Regards,
Sundararamaprasad.

How to validate numbers in char field.

Hello all,
I have one database column with char data type. This field should allow insert only
numbers [ zero to nine] and plus symbol .. how to validate this?
Pls help me..
I.m using oracle 9i database. So it does not allow REG-EXP and WITH methods.. So give some
sql coding to do this

As this forum is for issues with the SQL Developer tool, you'll probably get more answers in the SQL And PL/SQL forum.
Regards,
K.

How to validate material status in physical Inv Doc creation using MI01

Hi Experts,
I would like to know how to validate material status while creating physical inventory document using MI01 transaction.
I tried to figure out a suitable BADI and customer exits ,but it didnt work out well.
Kindly share your thoughts on how this can be achieved.
Regards,
Mohammed Aslam Rasheed

Do you really create your inventory documents with this MI01 transaction manually by entering material for material?
The real transaction for physical inventory is MI31. How do you want SAP to react if hundreds of materials are selected and inventory documents are created in a batch process?
SAP takes care about the material status in MI04 and MI07 transactions.
I am not aware of any exit for MI01 maintenance, you may consider Explicit and Implicit Enhancement Options

Strange window behavior with CS5

I have begun experiencing strange behavior with PS CS5. I should begun with the machine configuration: 2.66GHz iMac (8,1) Intel Core Duo with 4GB RAM and OSX 10.6.6, Radeon HD 2600 Pro graphics card. The initial symptom showed up suddenly as an inability to display an image window; that is, I could open PS normally, everything would show up properly, but when I opened an image file of any sort, there would be no image window. Other cues indicated that the file was open; for example, the window menu would show it selected, and the layers palette would show the file's layers.
It did not seem to matter what type of file was involved: PSD, JPG, TIF, whatever. Occasionally, this behavior would begin during a session. Sometimes it would happen right off the bat. Sometimes, stopping and restarting PS seemed to clean things up; other times, this had no effect. After messing around quite a bit with different permutations and combinations, all I could say was that the problem was random.
I might add that I've had PS CS5 on this machine pretty much since it was announced, and had not had problems with it before. So this issue came along quite suddenly a couple of weeks ago. This was a little after I'd installed an update for Nik's Viveza 2; and I began to suspect that. Although why Viveza should do such a strange thing was odd, and Viveza was never part of the files I was experiencing issues with. Anyway, I went back to an earlier version of Viveza and the problem persisted.
Since I run Time Machine, I also went back to versions of the entire PS folder from a month back, and found the same problem. Along the way, I experimented with the files I was using with PS CS4 & CS3, which I also have installed on this machine. These two versions of PS run perfectly well. At least the CS4 version has precisely the same plugins as the CS5 folder, and this seems to discount the potential problem with plugins.
To be sure about CS5, I completely deactivated, deinstalled, and reinstalled it. The same issues occurred. Now, I have to admit that I let PS run its update process so that I brought it back to the most recent version in this step of my troubleshooting. So, I can't be certain that the issue isn't with some update of CS5.
I might add that I have been running CS5 in 32-bit mode, for compatibility with certain plugins. This may or may not be an issue, since I have limited experience with running in 64-bit mode. At this point, I should add a bit more about the confusing behavior.
While messing around with CS5, I also suspected the GPU support, since my problem had to do with windows. When the problem presents itself, the usual cycle through window views that you get by pressing the "F" key seems to get messed up. In particular, the "F" key doesn't work at all. Next, if you use the View menu to select different views, the full screen with menu bar view will often have garbled pixels, while the full screen view will show a blank grey screen. Then, cycling back to a window view will show a window with blank grey contents. This is interesting since the starting point was no window at all; but going into full screen and then back will produce a window with bogus contents.
Now, the next strange thing, having to do with the GPU, is that CS5 often fails to recognize the Radeon HD 2600 card. Oddly enough, it did originally. And I had it running in Basic mode. However, CS4 does recognize the GPU; and I can set it in any variety of modes: Basic, Normal, and Advanced. This behavior is not consistent at all either; that is, while CS5 almost always now fails to detect the GPU, sometimes it does. As near as I can tell, this failure to detect the card does not depend upon whether I start CS5 in 32-bit or 64-bit mode. OTOH, CS4 always recognizes the GPU.
Another form of this odd behavior arises if I start CS5 cold, and then just open a new blank window. This almost always works. I get a blank white window, and I can paint on it with a brush, etc. However, if I go ahead at this point and open a file, then the new file takes over the window; and there are no tabs. If I select the original new file, usually labelled "Untitled", the window bar will show the change of filename but the window's contents and the layers palette will continue to show the old file that I had opened. Cycling through views can sometimes get back to the new Untitled file, but just selecting file windows never works.
Yet another aspect of this messed up window behavior is that the workspace bar, which shows the Bridge, MiniBridge and view icons on the upper left and the various workspace options and CS Live on the upper right, is present but blank. OTOH, the tool bar is always displayed correctly, as is the horizontal bar that shows the various tool options. Likewise, the palettes for the workspace such as layers, swatches, adjustments, and so on, are always correctly displayed on the left.
My next steps in trying to figure this out will be to ensure that I am running the latest of all plugins so that I can get everything running in 64-bit mode and try this again. However, the single factor that seems consistent in this whole mess is that whenever I do find this odd behavior, the performance preferences window will indicate that CS5 is not detecting the GPU. Whenever this happens, if I open up CS4 and check the same performance preference in it, the GPU is detected. I can have the two preference windows side by side on the screen in fact, CS4 sees the GPU and CS5 does not. The counter-indication is that sometimes CS5 will work properly and the preferences window still shows that the GPU has not been detected. Having said that, I can add that if I have opened up CS5, and it has found the GPU, and I have set it into, say, Basic mode, and then later found CS5 messing up, and I go back and check the performance preferences again, the GPU has always been lost. So, CS5 can mess up windows with or without the GPU detected and active; but when if it started with the GPU present, it will show up as lost after the weird behavior starts.
To add one more observation, I have had Macs and other computers with failing GPUs. This computer is showing none of the typical signs of that. Every other program seems to be working just fine, and I have a lot of these, many graphics intensive; e.g., Corel Painter 11, Parallels v6 running Windows 7, PS CS4, Lightroom v3, Aperture v3, and so on. It is just CS5 that is messing up.
I could load up this message with screen shots of all this nonsense, but I'm not sure what that would add to the strange tale, other than I'm not pulling your legs. I am, however, pulling out my own hair.
As I stated before, this began quite suddenly a couple of weeks ago, early Feb 2011. My best guess as to cause is some combination of incompatible updates between CS5, OSX, and maybe some plugin or other. I found unusual behavior with onOne's FocalPoint v2 last year after Apple updated GPU drivers in some OSX update, and cratered that program. It took onOne a month or two to fix that. I have CS5 on a laptop with the same OSX version, and on that I haven't seen these issues; but then, I haven't been using it as intensely over there. Also, that machine has different CPU and GPU models than this iMac.
So, to the community: is anybody else starting to see this odd stuff? Am I alone?

Here's the reason I say that the same plugins exist for both CS4 & CS5. Sometime last year, the internal hard drive on this computer died (as they so often do), and it was replaced under the Apple care warranty. As a consequence, I decided to rebuild the OS and applications from scratch and bring back my user files from backup. I among other things, I reinstalled all of CS4 as well as CS5 (and I had to put CS3 back too for reasons having to do with printing calibration images for Quad Tone RIP). Then, I went to reinstall the plugins that I needed. I use Nik Software, onOne, Portrait Professional and various Topaz plugins. To my recollection, most of these install in PS CS3, CS4, CS5, Aperture, and Lightroom. In short, it is not that I've copied or moved plugin folders from one application folder to another, just that the installers automatically detect the presence of the various applications and put the various plugins into each, as appropriate.
The only 32-bit plugins that I have that don't fit into this category are from Vincent Versace. He provides special versions of certain Nik plugins (Tonal Contrast, Contrast Only, etc) that function with some Acme Educational extensions for performing B&W conversion, sharpening, blah blah blah. These plugins are only 32-bit and the extensions are only CS5 compatible. I've installed these ones only into CS5; so, you've got me. OTOH, I've had these from Vincent as soon as CS5 was available; and they've worked so far without problems. Perhaps I should just edit the extensions so I could use the latest plugins direct from Nik instead of the Versace special editions...
I've checked fonts and repaired permissions. I am presently going through the rather tedious process of disabling plugins and extensions to see if anything yields consistent results. The rather random arrival of the strangeness makes ensuring that a change is really having an effect more difficult to validate, as you will appreciate.
I apologize for my long-winded original post. I add all of the detail so that anyone who'd experienced similar strange behaviors might properly pattern-match what they were seeing. On the one hand, in finding the cause of a problem, you look for what's changed; and theoretically nothing is new. On the other hand, there's always so much changing behind the scenes with automatic updates of this, that, and the other thing that it's impossible to make the claim that nothing's new.

How do I install CS5 on a new computer. My old computer crashed.

How do I install CS5 on a new computer. My old computer crashed.

You have to install your product again in new computer and launch your product software and click on help menu from there you can activate your product with the help of your product serial number.
If you do not have disk of your product then you can go through this link and download your product software or you can contact adobe customer support for best solutions.
Download link--http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

How to validate a date in message mapping

Hi experts,
how to validate a date in message mapping. For ex: if date comes as 2008/02/31, then file it shold not get processed.how to achieve this in message mapping. Please help .
Thanks&Regards,
Reyaz Hussain

Hi,
There are few simple ways for date validation as follow,
1.If you would like to handle it in XI only, then in message mapping you could verify about it with the help of generating smart exception.
For e.g in mapping there is one Date conversion API i.e. somthing DateTransformation It converts the incoming date format to required format. Here give the date format i.e expected from Sender File.
If in case the format miss-matched then it will create the exception.
You could handle this exception with the use of [Alert notification|http://help.sap.com/saphelp_nw04/helpdata/en/2c/abb2e7ff6311d194c000a0c93033f7/frameset.htm] and could be even able to notify to sender system about it.
2. The another solution is easy for SAP synchornous communication --If you are passing the file data to SAP, then you could use below function modules to verify date format in receiver RFC/BAPI or inbound IDOC program. If the sy-subrc is not 0 then don't process further.
CONVERT_DATE_FORMAT
ISU_DATE_FORMAT_CHECK
Thanks
Swarup

How to validate with CS5?

Similar Messages

Maybe you are looking for