E71 use bluetooth while audio jack,s connected

is it possible to use bluetooth headset while audio jack,s connected?
i listen a lot of internet radio on my e71 through car stereo by casette adapter(headphones enhancement).it's very arduous to plug off audio jack from the phone every time you want to answer a call and talk by bluetooth!
even if bluetooth heaset is connected i can't use him till i plug off audio jack.
if i answer a call when jack is connected i can hear the voice throough car speakers and i have to use phone mic.
is there any solution ?
please help!

I'm also having this problem. So are over 50 people to date, and I'm sure we're just the only ones who are active. http://androidforums.com/samsung-galaxy-s3/576056-can-not-use-bluetooth-when-audio-jack-plugged.html
Can this be fixed? This is extremely dangerous. I use my phone as an mp3 player and connect it through the audio jack in my car, and also want to use my bluetooth headset to make and receive calls. Instead the call comes through my speakers and there is no microphone, leaving me scrambling to unplug my audio cable while driving.
People say that the original firmware didn't have this problem. Samsung says it's Verizon, Verizon says its Samsung, I dont care who is liable as long as someone fixes it!
Thanks

Similar Messages

Galaxy S3 doesn't connect to bluetooth when audio jack is in use

Here is my issue with my Galaxy S3. My car has buil in bluetooth hands free. The car stereo has an AUX input for music. If I have a cable connecting the phone to the AUX jack for music I can not send/receive calls via the bluetooth.
I was able to do this seamlessly with my old Droid. The music would mute and I could answer the phone with the steering wheel controls.
now I need to unhook the wire from the phones audio jack. I see this as more than inconvienence but an actual safety issue. Unpluging and repluging in wires while driving defeats the point of a "handsfree".
Is anyone else having the same issue? have you found a work around?

I'm also having this problem. So are over 50 people to date, and I'm sure we're just the only ones who are active. http://androidforums.com/samsung-galaxy-s3/576056-can-not-use-bluetooth-when-audio-jack-plugged.html
Can this be fixed? This is extremely dangerous. I use my phone as an mp3 player and connect it through the audio jack in my car, and also want to use my bluetooth headset to make and receive calls. Instead the call comes through my speakers and there is no microphone, leaving me scrambling to unplug my audio cable while driving.
People say that the original firmware didn't have this problem. Samsung says it's Verizon, Verizon says its Samsung, I dont care who is liable as long as someone fixes it!
Thanks

Streaming a movie from Flixster & using Bluetooth speakers, my wi-fi connection keeps dropping

When streaming a movie from Flixster and using Bluetooth speakers, my wi-fi connection keeps dropping, like every 2 seconds! Anyone have any suggestions on how to rectify this issue? In fact, I don't even have to be streaming the movie. When I was in settings and went to connect to the speakers, I could see the wireless connection dropping, then restarting!

5.0.0.1036 is fairly recent, but there is a later update to 5.0.0.1067
See the link below for the download, and follow these simple installation instructions.
Do a backup of your device first, using Desktop Manager > Backup. Close Desktop Manager upon completion.
1. Download the OS file to the PC then install it to the PC by running (double clicking) the file you downloaded.
https://www.blackberry.com/Downloads/entry.do?code=577BCC914F9E55D5E4E4F82F9F00E7D4
2. Go to c:\program files\common files\research in motion\apploader and delete the file named "vendor.xml."
3. Plug in BB and double click on "Loader.exe." It's located in the same place as the above vendor.xml file.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

My E71 uses WAP even when a WLAN connection is ava...

I'd like to set it so my phone ALWAYS uses WLAN if available and only ever uses WAP when there is no WLAN connection.
It's a new phone (to me, anyway) and I'm still getting use to the settings.
It's an Eseries E71.
Thanks!
Solved!
Go to Solution.

Go to Web > Options > Settings > General > Access point - does it currently say "User defined" or "Ask on connection"? If says the former change to "Ask on connection" and then back to "User defined" to give you opportunity to choose WLAN access point.
Another way is to install SmartConnect by Birdstep form Nokia Store: http://store.ovi.com/content/10328
Happy to have helped forum in a small way with a Support Ratio = 37.0

How do I connect printer using bluetooth

What do I need to do to my printer so I can use bluetooth to make a wireless connection. I saw a bluetooth device that plugs into the usb plug on the printer, is that all there is to it.
Thanks
Happypappy

The Bluetooth profile HCRP is :
HCRP (hardcopy cable replacement profile). This profile allows the transfer of rendered data between Bluetooth-enabled devices, such as between a laptop and a printer. It is assumed that the client device (in this case, the laptop) will include a driver that renders the data. Note that Mac OS X supports Bluetooth printing through the Mac OS X printing API.
(from the Apple Bluetooth Device Access Guide )
To have the HCRP profile, you'll need to have Bluetooth software 1.5, or later. I'm running OSX 10.2.8 and ASAIK I have Bluetooth 1.3.2, so I don't have the HCRP profile.
You can use the Bluetooth Setup Assistant in /Applications/Utilities to configure your Bluetooth device, once the device is within range.
To sum up, whether the Bluetooth adapter in the link will work for you depends on the OSX version you're running on your G4. I would guess if you're running Panther, or Tiger, you'll probably have HCRP.
Sorry I can't be of more help.
Ed
PB G4 Mac OS X (10.2.x) PM G4 Dual 1.25, PM G4 Dual 867, OSX 10.2.8, OSX Server 10.2.8

How to use handoff while tethering?

Is there a way to use handoff while tethering over the connected IPhone?

Hi Lescar,
To use Handoff, follow the steps in this article -
Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support
Note that Personal Hotspot is included as part of Continuity.
Thanks for using Apple Support Communities.
Best,
Brett L

How to use the Digital Audio in & out RCA jacks a6010n

On the lower right of the back of my Pavillion a6010n desktop, above the mouse and keboard connections and below the monitor connection are two RCA jacks labeled Digital Audio in and out. The top one has an orange insulator and is labeled "out", and the lower one has a black insulator and is labeled "in". I have been unable to find any information about these or how to use them. Can anyone please tell me or direct me to information about this? I have Vista Home Premium 32 bit and have added a Sound Blaster Audigy sound card which is cheap but has a better S/N ratio. In Control Panel --> Sound the digital output for the sound card is listed but there is nothing about the Digital Audio jacks I would like to be able to use. Thank you all.

Yes there is. I suggest trolling these boards for the 3rd party remote solutions that will free you to use the remote in ANY application like Winamp, Notepad, Windows Media Player, etc.
Just my two opinionated cents...

Unable to connect internet using Bluetooth in my E...

Hi
Iam using Nokia E5.
Iam able to connect to mobile internet to laptop using USB connection,while using bluetooth for connceting internet iam getting below error.
"failed to connect to network.the modem is in use by another application ormay not be configured properly"
please advise how to over come this.

Same problem here with E72...well in 75% of cases, sometimes it connect easily, which make me believe the settings are correct.
Any news here? Does the problem lie with the computer or with the phone? Sometimes, but usually not, restarting one or both device helps.
Thanks,

Connect to a audio jack

i'm trying to connect my apple tv to a JBL on-stage dock with a 3.5mm audio jack via the Belkin 6' Digital Toslink Optical Audio Cable with Line-Out Adapter but I'm not having any luck. can anyone help?

From an iPad can you stream music other than iTunes such as rhapsody, pandora, and Sirius to a home stereo system using an airport express?
Yes, if you have the Airfoil app for this purpose.
No, if you don't.
Also what type of audio out connection is on the express?
It is an analog strereo mini jack, or it can also function as a digitial optical jack.
You will need a cable with a stereo 3.5mm plug on one end and 2 RCA plugs on the other. This is a standard cable at just about any electronics store. Or you can get one from the Apple store.

E71 Using Nokia Suite to connect to the internet

This may be a Nokia Suite problem but the first time I add my E71, via Bluetooth, to Nokia Suite I can use the phone to connect to the internet successfully.
After I shut my PC down and reboot the connection will not work, Nokia Suite tells be that it "Cannot establish a network connection".
The cure is that every time I wish to use I have to remove the phone from Nokia Suite then add it in again.
This is a laborious process and should be totally unnecessary.
I'm using Windows 7, the laciest version of Nokia Suite, have the latest software on my E71 & all the latest drivers, Bluetooth etc, installed.
In functional terms it seems after that initial use something is not getting 'released' or 'reset' properly.
Nokia please help me why your software is not working.

Hey SirAguilera,
Cud u pls chck, if u hav enabled proxy settings on ur pc, if yes, make sure that Internet Explorer as ur default browser n then chck, if it works.
If my post helped you, click on Kudos button and if my solution provided is opt 2 u, accpt my solution

I have iphone 6 plus. When i am connecting it to my Hyundai Grand i10 using Bluetooth and trying to call someone, unable to get the ringing sound. Sound comes only when the person receives a call.

I have iphone 6 plus (IOS 8.0.2). When i am connecting it to my Hyundai Grand i10 using Bluetooth and trying to call someone, unable to get the ringing sound. Sound comes only when the person receives a call.

Hello Mogulman46,
So what that means is when you have Do Not Disturb turned on, you may have an alert depending on the setting and how you are using your iPhone. So if it is set to Always, then that means that no matter what, your iPhone will not be notified. If it set to Only while the iPhone is locked, then that means that you will not get notification when your iPhone is locked but you will get notifications if your iPhone is being used. Also keep in mind the settings All Calls From can be set to certain contacts like Favorites, Everyone or no one. If you are using Do Not Disturb and you do not need it, then turn it off.
Use Do Not Disturb on your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht5463
Regards,
-Norm G.

Ad Hoc connection using Bluetooth

Hi,
Is it possible to create a Ad Hoc connection using a Bluetooth Dongle, I have no idea about Ad Hoc & Infrastructure Modes, So can anybody tell me if it is possible to create Ad Hoc wireless connection using Bluetooth Dongle ?
I wanted to use WLAN in my Nokia N96, I don't have a Wireless Router. I have read a few articles about Ad Hoc connections, What I assume is..A WLAN connection can be created without a WiFi Router. Is it possible ? If "yes" can anybody tell me the steps ?
Thanks & Regards
Sujay Kumar

If you have a wired (LAN) accesspoint you can set up a Internet Connection Sharing with a PC or laptop and your phone. They both need WLAN. Look at this setup for XP.
http://support.microsoft.com/kb/306126
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

3.5mm Audio Jack can't be used as an input anymore.

As I was researching laptops, I took into account my interest in sound and music recording and production. I was worried that the Macbook Air wouldn't be sufficient to record what I needed it to; however, I was reassured to find that the audio jack could be used as both an output and an input.
The day came on which I finally recieved my $1400 Macbook Air, come to find that the audio jack was only an audio output, and could not be switched. I read that this was disabled accidentally by a software upgrade, and I would like to know if there is a way to bypass this problem, or somehow fix the software so it recognizes a microphone input.
Thank You.

It is not disabled at all, you just have to have the right connector. I use it for full duplex telephone calls routinely with any of my iPhone compatible headsets.
The current MacBook Air uses a TRRS 3.5 mm mini jack, just like the iPhone. As long as the intended device (headphone/microphone) is compatible with this jack standard, you are fine.
TRRS (tip, ring, ring, sleeve)
You can also buy adapters that will "split" the connections into separate Mic and speaker channels, for use with recording equipment using other jacks. Say, for instance you have a microphone that uses a 1/4" jack.
Something like this:
http://www.kvconnection.com/product-p/km-iphone-43f35f.htm

No sound from audio jack and screen doesn't dim, using BootCamp 3.1 in Win7

I'm using BootCamp 3.1 in Windows 7 on a MacBook Pro (13-inch, Mid 2009)
When I plug in headphones I get no output sound; however, I do get sound from the main speakers (regardless of the headphones being connected or not). Side note, there is no red light coming from the audio jack.
Another problem that I'm having: when I try to dim the display, using either F1 or F2, or from the BootCamp Control Panel in the Dim tab, it doesn't dim.
I've saw in Apple's Support Download section that there is "Boot Camp Update for MacBook Pro (13-inch, Mid 2010) (Windows 64 bit)", but as you can see it's "Mid 2010" and not "Mid 2009".
However, for the sake of exhausting everything I can think of before posting here, I tried to download and install it. Only to get an error that states "The patch upgrade cannot be installed by the Windows Installer service because the program to be updated may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be updated exists on your computer and that you have the correct update patch."
Any suggestions?

the G5 is not en intel based cpu so people here may not know too much about the hardware setup but
people here
https://discussions.apple.com/community/desktop_computers/imac_powerpc
would own the same type of computer as you do any that may result in them having more insight into what could be the issue

No sound from audio jack and screen doesn't dim, using BootCamp 3.1 in W7

I'm using BootCamp 3.1 in Windows 7 on a MacBook Pro (13-inch, Mid 2009)
When I plug in headphones I get no output sound; however, I do get sound from the main speakers (regardless of the headphones being connected or not). Side note, there is no red light coming from the audio jack.
Another problem that I'm having: when I try to dim the display, using either F1 or F2, or from the BootCamp Control Panel in the Dim tab, it doesn't dim.
I've saw in Apple's Support Download section that there is "Boot Camp Update for MacBook Pro (13-inch, Mid 2010) (Windows 64 bit)", but as you can see it's "Mid 2010" and not "Mid 2009".
However, for the sake of exhausting everything I can think of before posting here, I tried to download and install it. Only to get an error that states "The patch upgrade cannot be installed by the Windows Installer service because the program to be updated may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be updated exists on your computer and that you have the correct update patch."
Any suggestions?

the G5 is not en intel based cpu so people here may not know too much about the hardware setup but
people here
https://discussions.apple.com/community/desktop_computers/imac_powerpc
would own the same type of computer as you do any that may result in them having more insight into what could be the issue

E71 use bluetooth while audio jack,s connected

Similar Messages

Maybe you are looking for