Easy rotator is moving when someone is zooming page

Hello , I have recently opened new website and i have some problems with it...the link may show some errors because i just bought domain and it is still in propagation phase here is link: http://www.designmansion.org Ok so the problem is i installed easy rotator on the site and it works perfectly but when someone zooms the page it is not moving with the page it is moving left or right and it is very bad...like for example if i zoom the page easy rotator goes to the right and i only see the half of it and the text and other images are moving correctly...so how to fix that pls help? Thanks

Your code is a total mess. Use the validation tools below and fix reported errors before you try to tackle the layout issues.
Code Validation Tools
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
When your code is straightened out, upload your page again and post back. Basically you just need to center your page with CSS and then apply a relatively positioned #wrapper division around your EasyRotator div.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Similar Messages

How to install a free Easy Rotator slider builder when the extension manager do not install it?

I have found a free easy Rotator slider from DWuser.com to be used to my online portfolio but cannot install it. What to do? Any suggestion?
Thanks

Please send us a screenshot of the error message in Extension Manager.

Why is the rotate point moving when using Transform Again on a triangle?

I am trying to create a pattern that I have created in previous itterations of Illustrator. In CC when I create a triangle (either via Star, Poly, or Pen tool) and then try to rotate it via Transform Each > Transform again, the rotation point moves according to what the bounding box would be if I reset it, rather than staying in one (original) spot relative to the actual bounding box and triangle. I cannot find any settings that would be affecting the rotate point in this way. I am pretty confident that I am using the same procedure now that I did in older versions of Illustrator. Perhaps I am using the wrong procedure.
Naturally, if you are rotating something around its center you should expect that it would end up create a circular pattern. It is more of a square with concave sides. The red is a perfect circle that I grouped to the triangle to demonstrate the rotate points movement. It is located in the exact center according to the align tools.

With the rotate tool, option click to set you point of rotation.
You also may want to look into the transform effect, theres is a box with 9 points for your anchor points you can try. You can also add an object filled with none, group this with your object, and transform the group, to get offset results with the transform effect.

How do I control the image that displays when someone shares a page from my website on Facebook?

I have created my website in Muse and it looks awesme. http://getlumen.com I have added Facebook Like/Share buttons to the pages that I'd like people to... 'Like" =] It all works fine, BUT... the image that is displayed after someone Shares or Likes the page, is the background image that I used on the Master design page. No bueno. Even worse, sometimes it's the credit card icons that are displayed on the products pages. Is there a way to "embed" an image into each page that is specific to that page and not an arbitrary iamge from the style guide, without adding it to the look of the page?

Thank you. But just to be clear...
Do I paste this code <meta property="og:image" content="URL to your thumbnail image" /> Before or After the Google analytics code that is curretnly in the header of each page? And the ONLY thing that I change in the above code is the "URL to your thumbnail image" for each page/image- yes??

Have the developers considered randomizing the numbers for the passcode? It is easy to watch the pattern when someone enters their passcode. However, if the numbers appeared is a random order each time, it would enhance the security feature even more.

Have the developers considered randomizing the numbers for the passcode? It is easy to watch the pattern when someone enters their passcode. However, if the numbers appeared is a random order each time, it would enhance the security feature even more. Personally, I would prefer this option with security in mind.

He slightly beat you Meg, and I'm in the same boat with you. If I used a passcode I believe I would go with the feature to use a longer alphanumeric passcode rather than a 4 digit number even with the random code entry.
And of course if Apple did put this feature in they need to make it an option or we'll see lots of posts wanting to know how to get rid of it.

When someone responds to my original email, and I "reply" back, my original email isn't included. I need it. How do I get it to keep my original email?

When someone responds to my original email, and I "reply" back again, sometimes my original email is not included, and I need it to be. How can I correct this? Thanks.

I've had the same problem for more than a year with every Reply or Forward message I've been sending and today I found the solution! And it's really funny.
The message is always there but you can't see it because the font color is white! So white letters on white background = blank message. I think the settings must have defaulted to white during a software update.
The solution is very easy: go to Mail - Preferences - Fonts & Colors. Check the box that says "Color quoted text" and then choose three diferrent colors in the boxes below. Enjoy.
P.S. Make sure to also check the "Include all of the original message text" option under Mail - Preferences - Composing

White border around images in Easy Rotator

I would like for there to be a small white border around my images when i put them into easy rotator. I really just want there to be about a 5 px space around them that is really just the background. I cant seem to find the right place in the code to make the div that holds the background color... which is white...to make it have like a 5 px padding..
or even make a 5 px margin around all images.
I even tried to place the border around my images when placing them in the rotator but the top still pushed all the way up and there was only the white space on the left right and obviously the bottom where the dots are that shows which number slide I am on.
Where in the code will I find this so I can manipulate it... thanks again for always helping
avery

Without a link, it's all guesswork.
Use Chrome or Firefox to preview your page. Right Click and select Inspect Elements. This should give you some idea of which CSS selectors are used by Easy Rotator.
Nancy O.

Best way to log/notify when someone logs into ASDM

What is the best practice to get a notification and log when s
omeone logs in and uses the ASDM? I have syslog server setup and smtp, and snmp traps, but not sure where to tell it to notify
me when someone logs into the asdm..... any suggestions?
thanks in advance

There a few ways to accomplish this (if I understand you correctly). You can simply drag the captured clips from the finder into the new projet or you can have multiple projects open at the same time and drag the clips between the bins in the browser. If you're moving clips between computers it's possible you might have to reconnect the clips if you've moved the clips to another drive. Pretty simple, select multiple clips in the browser and control click and choose reconnect. Explore the options in the file requester and you should be able to figure this out.

Link thumbnails in separate page to specific images in Easy Rotator?

Hello.
I have a a web page with a grid of 16 thumbnail images.
I have a separate web page running an Easy Rotator Slideshow.
I want to be able to click on a thumbnail and have Easy Rotator start with it's corresponding image rather than from the start.
Thanks in advance for any help!

Thanks for your reply!
I'm sorry, but I don't have hosting yet. I copied and pasted the code below
from the Easy Rotator Website. I'm able to open the Rotator (on a separate
webpage), but only from the beginning. That's as far as I've been able to
get.
I don't understand the following instructions (below the code).
I can't figure out how to link thumbnails to their corresponding images in
the rotator. I also have multiple thumbs that I need to link.
Thanks in advance for any help you can give based on what I've been able to
send.
Then, to link to a specific photo in the rotator, link to that rotator's
page using er_col in the querystring. The er_col value should be the
zero-base numeric index of the slide. For example, if you want to link to
the third slide (index 2) in the rotator in gallery.html, use the following
link:
gallery.html?er_col=2
When the gallery.html page loads, the rotator will jump to the third slide.
If your rotator has multiple image categories, you can link to a specific
category via the er_row parameter. As with er_col, er_row should be the
zero-base index of the category. Building on our previous example, let's
suppose you want to link to the third photo in the second category. Here's
the link you would use:
gallery.html?er_row=1&er_col=2
Thank you!
Lisa
On Fri, Mar 8, 2013 at 10:20 PM, Sudarshan Thiagarajan <

Newbie - How can I know when someone opens a PDF I sent in an email?

I'm trying to get a simple proof of receipt when someone opens a PDF attached to an email. Any suggestions about how to do this?

Thanks try67. Consider this: I'm not trying to silently trick the receiver, either. I intend to explain to them up front that when they open the attached PDF, it will provide a signal that is the proof they have been notified. It's also okay if this isn't easy; I have IT people that can do it.

Easy Rotator Help

When I insert an easy rotator on 4 of my 5 pages, it shows up like this :
I need it to show normally.
Anyone know what to do? Thank you.

Here is the link : http://cortekxhgl.com/acumaticaerp.php
This is what it should look like in dreamweaver. Thank you.

Can't delete a PDF on a network drive when someone has it open???

I am trying to like PDFs and the benefit they provide, but someone please explain to me why a
file that is meant to be a read-only file, cannot be deleted if someone has it open. Everyone
has read-only access to this drive where the PDF resides, yet when someone opens it, I cannot delete the file. Why
is this, and is there a workaround? Or at the very least, the ability to see WHO has it open? I am working with Excel files, and
it seems much easier to leave it in Excel for this very reason. At least if someone tries to open it, it forces them to open it in read-only
, allowing me the ability to replace that file, rename it, delete it, whatever. Seems like there has to be a fix. If I publish a PDF to a network drive, and realize there is a mistake, and 50 people have now opened it, are you telling me there is nothing I can do?! Doesn't make any sense. Please help!

Read-only only means they can't save any changes.
Excel probably creates a local copy of the file and allows the users on work
on that, while the real file remains unlocked.
Anyway, I'm not an Acrobat engineer so all of this is just guesswork.
If you want, you can ask Adobe to change this behavior here:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Why is my desk top moving when i move my mouse

why is my desk top moving when i move my mouse

Turn off Zoom from the Universal Access and Keyboard & Mouse panes of System Preferences.
(96210)

Could you change the way ff behaves in fullscreen? i hate it when i moves whole page on tab-bar display. tab-bar should slide on page without moving it

could you change the way ff behaves in fullscreen? i hate it when i moves whole page on tab-bar display. tab-bar should slide on page without moving it

I agree and looked everywhere for
http://www.krickelkrackel.de/autohide/
to no avail.
Can someone please change how to make fullscreen not push the page down when toolbars are shown on mouse hover in FF? The toolbars should behave more like IE. This would make FF SO much better. Please dont take the IE comparison the wrong way as FF is quite superior and the ONLY browser I use, but this one thing has got to be changed. It's irritating the way FF pushes the whole web page down while in fullscreen mode when the toolbars are shown on mouse hover.

Why won't my iPad 1 suddenly not rotate the screen when I turn it?

My iPad 1 won't rotate the screen when I turn it. What is wrong?

Hi nugget,
Do you have the Lock Screen switch in the wrong position? It's the switch on the right side just above the volume switch. Try moving it to the opposite position to see what displays on the screen. If the rotate arrow displays, then you are good to go....
Cheers,
GB

Easy rotator is moving when someone is zooming page

Similar Messages

Maybe you are looking for