Link thumbnails in separate page to specific images in Easy Rotator?

Hello.
I have a a web page with a grid of 16 thumbnail images.
I have a separate web page running an Easy Rotator Slideshow.
I want to be able to click on a thumbnail and have Easy Rotator start with it's corresponding image rather than from the start.
Thanks in advance for any help!

Thanks for your reply!
I'm sorry, but I don't have hosting yet. I copied and pasted the code below
from the Easy Rotator Website. I'm able to open the Rotator (on a separate
webpage), but only from the beginning. That's as far as I've been able to
get.
I don't understand the following instructions (below the code).
I can't figure out how to link thumbnails to their corresponding images in
the rotator. I also have multiple thumbs that I need to link.
Thanks in advance for any help you can give based on what I've been able to
send.
Then, to link to a specific photo in the rotator, link to that rotator's
page using er_col in the querystring. The er_col value should be the
zero-base numeric index of the slide. For example, if you want to link to
the third slide (index 2) in the rotator in gallery.html, use the following
link:
gallery.html?er_col=2
When the gallery.html page loads, the rotator will jump to the third slide.
If your rotator has multiple image categories, you can link to a specific
category via the er_row parameter. As with er_col, er_row should be the
zero-base index of the category. Building on our previous example, let's
suppose you want to link to the third photo in the second category. Here's
the link you would use:
gallery.html?er_row=1&er_col=2
Thank you!
Lisa
On Fri, Mar 8, 2013 at 10:20 PM, Sudarshan Thiagarajan <

Similar Messages

White border around images in Easy Rotator

I would like for there to be a small white border around my images when i put them into easy rotator. I really just want there to be about a 5 px space around them that is really just the background. I cant seem to find the right place in the code to make the div that holds the background color... which is white...to make it have like a 5 px padding..
or even make a 5 px margin around all images.
I even tried to place the border around my images when placing them in the rotator but the top still pushed all the way up and there was only the white space on the left right and obviously the bottom where the dots are that shows which number slide I am on.
Where in the code will I find this so I can manipulate it... thanks again for always helping
avery

Without a link, it's all guesswork.
Use Chrome or Firefox to preview your page. Right Click and select Inspect Elements. This should give you some idea of which CSS selectors are used by Easy Rotator.
Nancy O.

Linking to a specific image in a gallery

Hi All,
I'm putting together a book where I have image references within the text of the chapters. Ideally, I'd like to be able to click on the image reference (text) such that an image appears as a gallery overlay, which would then allow me to view the image, zoom it, close it and come back to the text from where I clicked on the image reference.
I've been having some trouble doing this and am beginning to wonder if it is even possible in iBooks author. The only options I see are:
1. I insert the image inline; which is not an ideal solution for me in this case as there are a lot of images referred to from a single page and inserting them would crowd the page or make it too long
2. I insert an image gallery on every page, or at the end of a section or chapter; however when doing this two issues appear. a) I am unable to link from text to a specific image in a gallery (I can only link to the gallery but always the first image opens), and b) when exiting the gallery I am not taken back to the referring page from which I clicked to go to the gallery
3. Insert the images on separate pages in a chapter of their own; again the same issue crops up here - I am unable to go back to the referring page once done viewing the image.
I am pretty sure I'm missing something, as this must be a fairly basic requirement for book publishers. I am wondering if there is a lightbox style gallery widget or other functionality in ibooks author that I can use; or perhaps some settings that I am not aware of.
To recap, I'm looking to link text within a page to an image that would ideally open up on the same page; and once I'm done viewing the image for me to get back to the text I was previously viewing.
Thanks for your attention and assistance in advance.

I'm looking to link text within a page to an image that would ideally open up on the same page; and once I'm done viewing the image for me to get back to the text I was previously viewing.
You can't link to an image without bracketing that image with (hidden) text.
You can link to an individual image in a galllery.
Linking to an image that blows up on the same page is not a feature of iBA.
Automactically returning to a hyperkinked bookmarked from the target is not a feature of iBA.
If these are features you demand now, build an app.
If these are feature you'd like to maybe see in the future, use iBA's feedback menu and make your requests heard. Good luck.

Linking an image from one page to an image within a slideshow on another page.

I would like to link an image on my home page with an image within a slideshow on another page of my website. I can create the link, but when I click on the link, instead of taking me to the image within the slideshow, it takes me to the first image of the slideshow which I don't want. Is there a way to link to an image "within" the slideshow and not the first image?

Hi
You can create pages with specific images and then use link of images which will open the page with that specific image, link images within slideshow to show exact image within would not be possible with native Muse feature as by default slideshow will open the first image in target.
Thanks,
Sanjit

How can I link to a slideshow image on a separate page?

I would like to link images on my homepage to specific images in a slideshow on my "Work" page. Currently I'm simply linking to anchored points on the "Work" page where corresponding slideshow thumbnails are, but I would like to eliminate the step of clicking on the "Work" thumbnail to open the slideshow. Is this possible, and if so, how do I go about doing this?
Thanks so much

Hello,
Unfortunately this is currently not possible to achieve in Adobe Muse.
User would need to click on the thumbnail to view the image. Anchor links cannot take users to specific slides/images in a Widget.
I would suggest you to post this as a feature request on our "Ideas for features in Adobe Muse" section of the forums : http://forums.adobe.com/community/muse/ideas
Regards,
Sachin

How do I go from a link to a specific image in a slideshow?

I have a two-part question.
1. How do I go from a link to a specific image in a slideshow? If you take a look at the attached screenshot, here's what I'd like to accomplish. I wan to click on a link like B for examply at the top of the page. It scrolls down the page to ANCHOR "b" where I have a slide show. Once it scrolls down, I would like to have the slideshow to slide over to the image set that matches the link that was clicked. in this case, if i click on B at the top, the slideshow would slide to image set "B".
2. Each piece of work I want to display has three images. One which is our main image seen inside the black outlined box below. There are however two additional images tied to each piece being shown. What is the best way to set this up? The default way of using the slideshow is limiting.

Unfortunately I don't have an answer for you as I have the same problem!
I want to link images on one page to certain slides on another.
Have you had any luck solving this?
I've spent hours looking for a solution... I'm very frustrated!!!
Will post again if I get some answers.
Best of luck
David
David, as of right now there is no way to click a link and have it go to a speficic image inside of a slideshow on another page. It will only show the first image in the slideshow on that other page.
So, perhaps you could just have the image you want to jump to on the other page, be the first image in the slide show. Make sense?

Gallery composition with link/anchor to a specific image

Hello everyone,
Is there a way go to a page that has a gallery composition in it and being able to show the page with a specific image in the gallery?... So if I have five images on the gallery, the link to the page might include the name of the image or anchor name and when the link is clicked it will land showing that image.
Thanks in advance.

Hello,
You can try creating the gallery using widgets and then use 'Hyperlink' to link the individual images to other pages in Muse site.
Regards,
Neha

Gallery files included on a page without gallery images/thumbnails

Hi,
I included the .js files for the gallery on a page without
gallery images/thumbnails.
The effect is, that the first image with a link on that page
gets a yellow border (as normally the first thumbnail does).
To correct the problem, I changed the code in line 44 of
SpryThumbViewer.js:
from
this.tnImageSelector = "a[href] > img";
to
this.tnImageSelector = "div.thumbnail a[href] > img";
(of course, you have to put a <div
class="thumbnail">...</div> around an image on real
gallery pages, so that they work there)
Do you see any problems with the changed code? Could it be
changed in the official release?
Greetings,
Sven

Live View, Code View or Design View?
Have you validated your code to check for errors?
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
You could comment out your links to external scripts and CSS Files.

To turn off styles in Design View only, go to View > Style Rendering > untick Display Styles. Or consider using a Design-Time Style Sheet.
Dreamweaver Help | Use Design-Time style sheets
To speed things up a bit, try these tips:
1. Edit -> Preferences -> Code Hints -> Disable description tooltips
2. Edit -> Preferences -> Highlighting -> Untick both Live Data Untranslated and Translated
3. Edit -> Preferences -> Sync Settings -> Untick all in sync settings
Nancy O.

Download a file on a separate page without linking it with the current session

Hi,
Here is my problem:
In a JSP, the client chooses a link referring to a document which is contained in a blob on the database. This JSP calls a servlet which retrieves the PDF from the blob. I can send this PDF on a separate page if the <a href> on the JSP specifies TARGET=BLANK. But if the client closes the new window, the server doesn't recognizes the session that was going on on the JSP anymore. It looks like the response sent with the PDF takes the pole of the session and the first pending page (the JSP) is not associated anymore with the session.
There must be a way to send a second page without associating it with the current session.
Another way to solve my problem would be to send the PDF as part of a regular html page. I know this can be done, but I don't know how to do it.
Any suggestion?
Thanks
Jean Vaillancourt, Montreal

When opening the new window use child instead of blank. That should keep the session intact in the old window.

How to avoid tiny rectangles showing up as separate pages in multipage PDFs scanned with Image Capture?

I'm not sure I'm posting this question in the right forum. I am having a scanning problem. I’d appreciate it if anyone could explain what’s happening and suggest how to avoid it or how to fix it after the fact. I’m using a large-format scanner, the HP Officejet 7610, with a MacBook Pro, running OS X Yosemite, v.10.10.1. I am using Apple’s Image Capture app, v.6.6, for scanning software. I am scanning some newspapers, with text and photos on the pages, which are about 11” x 14-3/4” in size. I am making multipage PDFs, each about 10 pp., at a resolution of 300 dpi. Sometimes, when I scan a single page or multiple pages, one or more tiny rectangles of scan show up in the resulting PDF, following a normal page or between pages. In the Acrobat Reader, this tiny rectangle shows up as a curious little box, much less than an inch on a side, and when the PDF is printed out, the tiny rectangle is printed, too, as though it were a separate page. Why is this rectangle showing up in my scans? Is there a way to keep from getting it? After it has been made a part of a multipage PDF, is there any way to get rid of it, keeping the rest of the scan?

I haven't received any replies to the question I recently posted, but one work-around that HP suggested is to use different scanning software. Instead of Image Capture, I used the HP Scan.app that came with my all-in-one printer. I haven't seen those rectangles in my PDFs since switching.

Tiny rectangles showing as separate pages in multipage PDF scans with Image Capture?

I am having a scanning problem. I’d appreciate it if anyone could explain what’s happening and suggest how to avoid it or how to fix it after the fact. I’m using a large-format scanner, the HP Officejet 7610, with a MacBook Pro, running OS X Yosemite, v.10.10.1. I am using Apple’s Image Capture app, v.6.6, for scanning software. I am scanning some newspapers, with text and photos on the pages, which are about 11” x 14-3/4” in size. I am making multipage PDFs, each about 10 pp., at a resolution of 300 dpi. Sometimes, when I scan a single page or multiple pages, one or more tiny rectangles of scan show up in the resulting PDF, following a normal page or between pages. In the Acrobat Reader, this tiny rectangle shows up as a curious little box, much less than an inch on a side, and when the PDF is printed out, the tiny rectangle is printed, too, as though it were a separate page. Why is this rectangle showing up in my scans? Is there a way to keep from getting it? After it has been made a part of a multipage PDF, is there any way to get rid of it, keeping the rest of the scan?
This question was solved.
View Solution.

Hey there @Rudyard , welcome back
I read through your post about the scanning issues you're having, and I'd like to help!
Please try scanning with the HP Scan software to see if the same quality problems happen, and if so, try these steps in order:
Mac OS X: How to reset the printing system
Repair disk permissions
Restart the Mac
Install the full feature driver: HP Officejet 7610 Wide Format e-All-in-One series Full Feature Software and Drivers
Also install the Apple driver: HP Printer Drivers v3.0 for OS X
I hope that helps, let me know the results!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

CSS code to change cursor to magnify symbol on hover over specific images

Hi to you experts out there! I'm having a problem getting my CSS code to work. (I'm using Adobe CS4 Design Premium)
The web pages I'm working on are a gallery of images, with linked thumb images to the left which when clicked show the complete image on the right of the page. All 'main images' can also be clicked on to link to the next main image along, corresponding to the order of the thumbs. However, some 'main images' when clicked on are linked to larger, full page versions of an image. In this instance I want the user to see the pointer/cursor to change from the little hand to a magnify symbol when hovering over these specific main images. This is where I can't get the css code to work/achieve this.
For your info the main images reside in '#main_image' div. There is a compound CSS Rule for the main image pic called 'main_image a img', for a 2px, white border. There is then a hover state for this 'main_image a img:hover' where the border changes colour. (the main pic is assigned the ID 'img')
I have created a new compound CSS Rule for specific main images, where I want the cursor to change to a magnify symbol, again corresponding to the '#main_image' div, named 'main_image a zoomin' and also a hover state, 'main_image a zoomin:hover'. These two still have the same border attributes as above, 'a img' and 'a img:hover' (these main pics have been assigned the ID 'zoomin'). However, this is where I have also added CSS code for the cursor change. I have tried 15 or so variations of the following, without success:
#main_image a zoomin {
     cursor: url ('images/magnify.cur'), pointer;
     [then the border attributes...]
and...
#main_image a zoomin {
     cursor: url ('images/magnify.cur'), -moz-zoom-in, auto;
     [then the border attributes...]
What am I doing wrong? This can't be difficult! Would welcome some help please!
(Within the root directory: WinVista(C)/local_sites/sjcillustration/images' there are two files 'magnify.cur' (a downloaded img) and 'magnify.png' (my custom img - created in Illustrator, which I would actually prefer to use, but can't export as a .cur file). )

Call me Capt. Obvious, but why can't you put a "magnify" icon next to or below the thumbnail image along with the words "Click to Zoom?"
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

Can I set up a link (button or word) from a specific slide in a slideshow?

Can I set up a link from a specific slide in a slideshow?

Yes
Turn off the "Edit Together" option.
Navigate to the slide you want (turn thumbnails on temporarily if necessary).
Select the area you want.
Hyperlink in the normal way.
Repeat until you have linked all the slides you require.
Turn "Edit Together" back on.
I think I had to link the caption separately as I couldn't find a way of selecting them together with the image or grouping them. Each slide links to a different page no problem.
Peter

How to create a 4 page pdf from images - each page should open at same size

How do I create a 4 page pdf (from 4 images - all the same size) that opens each page at full page size?
Thank you so much.
Ginger
PREVIOUS MSG:
My goal is to create multi page pdfs that are created from images (scans of old brochures). I receive images (scans of pages) all at the same size.
I have been able to create the 4 pdfs (each opens at full page size) and merge into 1 pdf. When I open that final pdf, I see a column of 4 pages, page 1 image being larger than the remaining 3. When I click on the left, page 1, icon, I get the full page. When I click on icons for pages 2 - 4, I get nothing. The only way I can get the other pages in a full page view is to adjust the scaling after left icon is selected. That is not what I want.
How I created the files.
I can either create pdf pages using Photoshop, or using Acrobat Pro itself through:
File> Create PDF> From File and adding each of the images. I then, for each, choose Properties> Initial View> Fit Page> Save. Then I use File> Combine> Merge Files into Single PDF> Save.
Then I open the multi page pdf.
I appreciate any help.
Thank you,
Ginger
PREVIOUS MS

It seems to me what you want to do is create one document which a combination of all four and then one page of each.
To create a Document with 4 pages combined in to one PDF. open the first in a Series the to Edit menu and click on add pages click on next document (browse to document first) the choose attach to to end of document or add to end of document. Repeat until you get all images added. They will end up (or should ) center in center of their own page. Save this document with a new name for now.
Next go back to Photo shop and reduce size of images to fit desired sheet of paper (8-1/2 by 11, 8-1/2 by 14, whatever) place them side by side and row by row so you have 4 images on one page.
now save as Pdf.
now decide which you want to swap to the Thumbnails (the 4 on one page, or 4 individual pages. I would use the thumbnails and make each a button that references the page in the document you save as a 4 page pdf that applies.
Then on that page write a line saying click each illustration to see full size image (you might have to write this line while in Photoshop) then save this as PDF file
Try out. You might have to use some javascript controls to do this. But I am not experienced in JavaScript to do this. I'm sure it cane be done.
But note you will have to save both documents with the Thumbnails and the four page and Thumbnail page in a folder and send to prospect
If you want just four separate pages in one Pdf just do first two paragraphs above

How can i count no.of links on a web page using VBA programmability

hi,
could anybody help me in getting the no.of links,no.of images in e-tester using custom programmability test.
i'm new to e-tester.
earlier i was using QTP. i know VBScript and how to getitemscount in QTP

Hi pasumarthi,
Great question! Try putting the following code in the Private Sub RSWVBAPage_afterPlay(). If you run into problems, please reply to this message. This code can also be copied into a custom vba test if you wanted to test the number of links and images on the page against a specific number.
'Variable declarations
Dim images As Collection
Dim links As Collection
Dim resultbImages As Boolean
Dim resultbLinks As Boolean
Dim item As Object
'Initialize variables
resultbImages = False
resultbLinks = False
'Get all the elements that have a tag of IMG
resultbImages = RSWApp.om.FindElements(images, , "IMG")
'Get all the elements that have a tag of A
resultbLinks = RSWApp.om.FindElements(links, , "A")
Call RSWApp.WriteToLog(, , "There are " & images.count & " images on the page")
Call RSWApp.WriteToLog(, , "There are " & links.count & " links on the page")
Message was edited by: kgehrke

Link thumbnails in separate page to specific images in Easy Rotator?

Similar Messages

Maybe you are looking for