EBC Discussion

In a particular configuration, there are two applets in a view. The top applet is based on Siebel BC (Acccount) and the below applet is a list applet based on EBC.
The user navigates to this view as follows:
1. Search for a particular Account
2. Drill down on Account Record to navigate to Account Summary view (Here all BC are out of the box Siebel BC)
3. The user then clicks on the tab named 'XYZ' to navigate to the view in which bottom applet is based on the EBC.
1. If for a particular Account Record there exist no corresponding child records in the EBC, I need to make the user aware that there are no child records for the account record. For example: If there are no child records for Account 'ABC' then the bottom applet will have no records. Can a message be shown to user that there are no child records for this account.
2. If I change the bottom applet to form applet, can I created a calculated field on EBC and stamp a meaningful message to make the user aware that there is no child record for the Account 'ABC' (Considering there is 1:1 relation between the Account and the EBC)
Which events in the BusComp etc I can make use of to achieve the above?
As per bookshelf regarding BusComp_Query event:
The Query event is called just after the query is complete and the rows have been retrieved, but before the rows are actually displayed.
Can I use this event to check if the Query has fetched any child record for the Account Record.
Any ideas please share the details.
Many Thanks.

I just thought this may be a more direct way to notify about the user, not just the post.
It is. Or it used to be. To be honest, I have no idea if that's true anymore. Either way, I was just responding to let you know that this topic has been broached in other quarters, as well, and that you are not alone in your concerns, etc.
And yes it is, of course, up to the Hosts to decide what to do; I didn't mean to say anything otherwise.
I believe that you allowed that the Hosts will decide what they want to do about this and/or similar situations in your OP. My mentioning it was more didactic, and intended for other members who may be reading this topic, but who are not as familiar with how things work around here as you and I.
I've seen this forum used for notifying the Hosts of a user in this way, so I thought it wouldn't be out of the norm to do so.
You are correct. This forum is sometimes used for exactly that purpose. Even so, many people would agree that using the 'Report this post' link is a more discreet way of drawing attention to problem posts and/or members. Posting about people and their posts publicly sometimes invites new problems and exacerbates existing ones, especially wrt aggressive or angry posters, but that's not to suggest that this will be the case in the present situation.
I didn't mean to be against any rules, I just thought this may be a more effective way, in addition to "Report this post".
You haven't broken any rules that I'm aware of. Again, I responded to your topic to inform you that your concerns are shared by other people and raised in other quarters, as well.
Good luck!

Similar Messages

  • To the person who runs this Discussion

    I have been unable to find a contact to send you a message.
    On the page of this discussion that lists the headers of all the topics, at the bottom after the last topic on the page, a link is offered named "More". On clicking this, a second page appears (and then later pages), continuing the list of topics. When I select a topic on the second (or third) page and reply to it, I am automatically returned to the first page. I than have to scroll down to the bottom, press the More link again, and hunt for the last topic that I read. If I were on, say, the third page, I have to scroll down twice and press More twice, and so on. Each page is re-downloaded for obvious reasons (given the large amount of traffic on this discussion.) By the time that I reach the third page, it is quite a hunt to find the last topic that I visited so that I can continue to browse. This is inelegant and wastes time.
    In the iMac (Intel) discussion, (also heavily trafficked) the other method of accessing later pages is used. That is, by a button marked Next. Having pressed that, I stay on that second page (or third page) and am returned to it, and do not have the fuss of repeatedly pressing More.
    I have looked at "Your Stuff" but there seems no relevant preference. Therefore, how can I select the second method for all topics.
    Thanks.

    Is it caused by using different tabs to get to the topics?
    First option (Overview tab):
    has this at the bottom:
    I'm guessing that it the 'More' you are referring to?
    Second option (Discussions tab):
    has this at the bottom:
    I've used the Set as default tab option for the Discussions tab for this Forum.
    Regards,
    Colin R.

  • Ask the Expert Live Discussion – BT Infinity

    Hi All
    I’m pleased to announce our next live discussion with some BT experts!  It’s on a subject that is of great interest to many of you – BT Infinity!  We’ve recently announced the changes to the BT Infinity service and thought it was a great chance to get our Infinity experts on to the community to tell you a bit more about that and answer any Infinity related questions you may have.
    Our experts Charles and Martin will be chatting with you on Tuesday 15th May at 7pm.
    The format is pretty simple – simply come back here on that date and the box you see below will turn into an area where you can submit your questions.  Enter your email address in the reminder section  so you don't miss any of the chat.
    BT Infinity Expert Chat Transcript
    (05/15/2012) 
    7:00
    KerryG: 
    Hi Everyone, let’s get the chat started! Welcome to our live discussion with our BT Infinity experts.
    7:01
    KerryG: 
    Today we are joined by Charles and Martin from the Infinity team. Welcome everyone!        
    7:01
     KerryG: 
    Today’s chat is tech focused on BT Infinity, so if you have any individual service queries, we can’t answer them during the chat, sorry. Those queries can be raised in the forum as normal. This chat is focused on the Infinity service itself, all comments will be moderated and the usual forum terms apply.
    7:01
    Charles: 
    Hi everyone!                                                                                                              
    7:02
    KerryG: 
    We have our first question...                                                                                        
    7:03
    Comment From GedGed:
    my wired infinity speed is 54 kps but I can only get 20 when wireless - any way I can improve the wireless speed - Thanks 
    7:04
    KerryG: 
    We're typing up the answers, so bear with us as we get the answers through to you...      
    7:05
    Charles: 
    Hi Ged 
    • Upgrade your computer to ‘N’ standard wireless hardware. If needed, buy a suitable N wireless adaptor from BT atwww.bt.com/nwireless 
    • Keep your computer streamlined eg. by running our ‘PC Healthcheck’ app (part of BT’s Desktop Help software atwww.bt.com/desktophelp) 
    • Reserve wireless for mobile devices, use Ethernet for main computer 
    • Consider powerline adaptors for longer ranges 
    7:05
    Comment from
    john 46
    hi all                                                                                                            
    7:06
    KerryG: 
    Hi gooch - thanks for your question, but this is an Infinity tech chat so we need to keep it on topic if you post in the Phones board there's lots of helpful community members that will help you out with your query 
    7:07
    Comment From Neil Potter
    How soon after an exchange goes live with Infinity will BT allow other providers to sell Fibre To The Cabinet services from that exchange? My existing ISP is waiting to announce pricing details to me so I can make an informed choice. Thanks
    7:08
    KerryG: 
    Hi John Good to see you on the chat - who else is here?                                              
    7:09
    Comment From Chris
    Hello world.                                                                                                    
    7:10
    Comment From Helen
    hi all.                                                                                                                
    7:11
    Comment From Paul
    Are we able to get fastpath on BT infinity,or will this ever be available ?               
    7:12
    Martin S.: 
    i Neil. When Openreach enables an exchange for fibre, all internet service providers are able to use that service equally - so other ISPs should be able to offer their fibre products at the same time as BT Retail's Infinity product
    7:12
    KerryG: 
    Thanks for all the great questions coming through guys... answers being typed as we speak!
    7:13
    Charles: 
    Hi Paul, We don't support Fastpath on BT infinity at the moment, I'm afraid.                   
    7:13
    Comment From Helen
    I've recently upgraded to Infinity 2. The ethernet connection is fine, but the wifi is constantly dropping. I have an old Homehub 2 , which we had for total broadband, will it work, so I can test the wifi.
    7:14
    Comment From Simon
    Hi all                                                                                                      
    7:15
    Martin S.: 
    Neil - also its worth remembering that when an exchange is enabled for fibre, this does not automatically mean that all cabinets and lines connected to that exchange are also enabled, which might explain if your exchange has been enabled but your line is not appearing as eligible yet
    7:16
    Comment From Kevin
    Whats the upgrade path from fttc to fttp does it mean a new contract or can we just expect it to migrate?
    7:17
    KerryG
    Out of interest...are those on the chat existing Infinity customers or people thinking about it?
    7:18
    Charles
    Hi Helen, your wireless should work ok on your Hub 2, though our more recent Hub 3 is better. If you're expereincing drop outs, it's usually a sign of radio interference. Have you any powerline adaptors you could use instead?
    7:18
    Comment From Neil Potter
    Thanks Martin - Workmen recently dug up the path outside my driveway to install FTTC so I know it's there  My exchange goes live on 30th June - I can't wait!I have another question: I'm in the process of consolidating my TV, Telephone and Broadband into one bundle. The "BT Vision Unlimited" looks ideal.
    7:19
    Comment From Paul
    Is there a estimated date that fast path will be available ?                                           
    7:19
    Martin S.
    Hi Kevin - Due to the structure of how fibre has been deployed, your line will either be FTTC or FTTP; there is no way to change your technology type. If you mean 'how do you move to the faster 80mb product (on FTTC)?', this can be done using the links on BT.com
    7:19
    Comment From Helen
    I'm an existing customer.                                                                                       
    7:19
    Charles
     No, 'fraid not, Paul.                                                                                                    
    7:19
    Comment From Neil Potter
    thinking about re-joining BT just for Infinity product(s)                                    
    7:19
    Comment From Paul
    existing customer here                                                                                     
    7:20
    Comment From Chris
    I've recently ordered my Infinity package, installation is due the 22nd.            
    7:20
    KerryG
    Great to see you all on here... roll on the 22nd for you Chris                                             
    7:20
    Comment From Kevin
    Why are you fitting 2 separate items a modem and a wireless router? cant we have a combined unit, without the need for 2 adaptors and sockets its not the tidiest install
    7:21
    Comment From Chris
    Regarding the Infinity installation, is it mandatory for the BT O/R Engineerer to have access to your PC?
    7:22
    Martin S.
    Hi Chris - It is not mandatory, but we recommend allowing the engineer to show you on your own equipment your fantastic new speeds!
    7:22
    Comment From Simon
    hi, im trying to setup port forwarding to my old draytek, as it has more powerful wirelelss capabaility then the bt homehub, is it possible
    7:23
    KerryG
    Hi Simon - that sounds like a great question for the forum boards, the Draytek is not a BT product so we can go into detail here in this chat, but there will be lots of people who i'm sure can help in the forum.
    7:24
    Charles
    Evening Kevin, for BT Infinity is based on thecurrent FTTC product offered by BT Openreach, which comprises the VDSL modem provided by Openreach and the Home Hub 3 provided by Retail. If/when Openreach move to supporting a single box solution, then we would look to moving to that. Openreach will shortly be trialling this.
    7:24
    Comment From Helen
    I've already checked there's nothing interfering with the Hub.                              
    7:24
    Comment From Helen
    I don't have a Hub3, both the one that is currently connected, and the old one I have in the box are Hub 2.
    7:25
    Comment From Chris
    Yes, going from 3mb to an estimated 50mb+ is quite the upgrade, I would even be happy if it was merely a 10MB upgrade. - If I remember correctly FTTC is around(if not the same) price as standard broadband these days.
    7:26
    Charles
    Helen - could you post your issue in the Bt Infinity forum and one of our mods will look into this for you.
    7:26
    Comment From Kevin
    My install is planned for the 28th May my question is i have my master socket downstairs directly below the room i want my fttc modem installed is it possible to have the modem upstairs with the extension cable ?
    7:27
    Comment From Mike B
    I have an istalation question. I understand that the modem for Infinity needs to be sited close to the BT phone socket. Am I right in thinking that the modem is then connected via a Cat 5/6 cable to the wireless router situated elsewhere in the house? Does this impact on the speed?
    7:27
    Comment From Helen
    Ok charles, I will do..                                                                                    
    7:28
    Comment From Neil Potter
    On the subject of Powerline Adaptors (PA's) - I have a unique setup here at home whereby I would need to utilise 4 x PA's. Are there any known performance issues sharing data, experiencing latency or dropped packets from Desktop PC's all connected via PA's at the same time?
    7:28
    Martin S.
    Kevin / Mike B: The engineer can use an extension cable up to 30m long to help position your equipment where you want it - this should not affect your speed.
    7:29
    Comment From Eric Simpson
    I have bt broadband .. I am currently getting 3M download. I have two "estimates" from the BT site. One says I should get between 10-17 ... the other which does some sort of check/diagnostic (and appears to be the real thing) says I should get between 1-4. We are meant to get Infinity next month. How would that impact me?
    7:31
    Charles
    Hi neil - good question. I've found from experience that powerline performance is very much dependent on the adaptor manufacturer and your home environment, specifically how 'clean' your electrical spectrun is. All I can say is give it a try. That said, i would always recommend an Ethernet connection for the fastest and most stable speeds.
    7:31
    Martin S.
    Hi Eric. You can find your predicted BT Infinity speed (if it is available on your line) at bt.com/infinity and entering your number into the availability checker
    7:31
    Comment From Simon
    hi, really I'm just asking a tech question - can the bt home hub port forward?
    7:32
    Comment From Eric Simpson
    Does my question pop up only when it comes up the queue?
    7:33
    KerryG
    Hi Eric - Yes, they will flow in as they get answered - it helps to make the chat easier to read as the Q & As flow in a reasonable order. 
    Great questions coming through... lots more to get through...been a quick 33 mins! 
    7:33
    Charles
    Hi simon - I'm assuming you're talking about the Hub 3 (our latest Hub). Yes, it does support port forwarding. You can set this up via the configuration menu in your Hub. See instructions in your Hub user guide for how to do this. 
    7:33
    Comment From Glynn
    Will BT Retail be selling fibre-on-demand at an affordable cost for home users?
    7:35
    Comment From guilbo
    Hello folks. I have a question. We often see on the Vision forum that users start having problems with their service on Infinity that they weren't having with ADSL. Do you know of anything that would cause this?
    7:35
    Martin S.
    Hi Glynn, we are currently reviewing Fibre on Demand and have not yet announced any pricing or availability details.
    7:36
    Comment From Chris
    How reliable is that checker by chance?                                                         
    7:37
    Comment From Paul (Heanor)
    Also I am booked for installation on 22nd May                                 
    7:37
    KerryG
    Nice one Paul  You'll be enjoying super fast speeds then too                                                  
    7:38
    Charles
    HI guilbo - I'm not aware of any technical issues for Vision customer regrading to Infinity. We have hundreds of orders go through each week. If the problem persists, I would suggest customers contact the Infinity helpdesk.
    7:38
    Comment From Neil Potter
    Thanks for your reply Charles - If I could ask, the PA's you supply with the current BT Vision boxes are manufactured by Simpler Networks - would I need to purchase identical PA's from the same manufacturer for extending my network? Will BT Retail sell me these as an additional extra? This will be my last question - I feel I have been fortunate to have two answered already 
    7:39
    Martin S.
    Hi Chris - The speeds estimated in the checker are a very good indication of actual speeds, but we can only know the exact speed once installed.
    7:39
    Comment From Eric Simpson
    it says not available yet. I am just frustrated because I get faster speed from my little Android phone using it as a hotspot. If there is a bottleneck somewhere in the system, would fibre really make a difference
    7:41
    Comment From Kevin
    I have been given the estimate of 59.4Mb download 20.0Mb upload will this be accurate?
    7:42
    Charles
    Hi neil - yes you should always stick to the same model for all your PA's. I am pretty sure that additional Vision PA's can be bought from the BT Shop, and these should be fine. I have had 70mbps out of mine! seewww.bt.com/shop
    7:43
    Martin S.
    Eric - Generally fibre can make a very significant difference to overall speeds, though individual increases can't be guaranteed. If / when it becomes available on your line, the checker will tell you how much of a difference it could make to you.
    7:43
    Comment From Chris
    I'm assuming it's based on the length of copper from my house to the Green Cab. - The exchange is 2miles~ away from me and the said Cab. Will this also effect my speed?
    7:45
    Charles
    Hi Kevin - our estinmates are as accurate as we can make them, but your actual speed will depend on your underlying phone line speed. We will only know your true speed once Infinity is live - it will then train to your optimal line speed, which should be approx as shown by your prediction.
    7:45
    KerryG
    Glad to see you all keeping Charles and Martin busy here... keep the questions coming in, we're in the last 15 mins now...
    7:45
    Martin S.
    Chris - Yes, your speed is primarily affected by the total amount of copper between you and the exchange. With FTTC fibre products, the old copper between the exchange and the cabinet is replaced by fibre, meaning less copper overall and faster speeds. 
    7:45
    Comment From Lewis
    Why does DLM take so long to take interleaving off?                                     
    7:45
    Comment From Neil Potter
    Thank you very much for your time this evening Charles / Martin / Kerry. It's nice to see these types of events becoming more accessible to your customers and I for one feel I've got a lot from joining you all this evening 
    7:46
    Martin S.
    Thanks Neil - you're welcome!                                                                                  
    7:46
    KerryG
    Great stuff Neil.... glad you've found it useful.                                                                     
    7:46
    Comment From Chris
    The Cab is 500-600 metres away from me, and according this graph the the BT estimated speed is just right on that.
    7:47
    Charles
    Hi Lewis - DLM will apply interleaving only if it detects an ustable line. It will not apply interleaving unless it is warranted.
    7:47
    Comment From Kevin
    I guess when i get my infinity installed a lot of sites and links will still be on dsl or adsl+ or even slower and the speed my end wont improve the speed there end ie my speed will depend on the site i visit and there upload speed for my download speed?
    7:48
    Comment From Dom
    I am moving to BT infinity, but I had to order my line and then wait for it to be activated before ordering infinity. Is this a technical issue or a process at BT issue?
    7:49
    Charles
    Evening Dom. It's a process issue - we can only provide Infinity once a Retail line is up and running.
    7:49
    Comment From William Sinclair
    Hi guys. I've upgraded to Infinity 2 with an estimated max download of 49.5 Mbps however my IP profile hasn't budged from the Infinity 1 value of ~30. Any thoughts?
    7:50
    Comment From Dom
    Thanks - this is a great service BT, keep it up!                                                   
    7:51
    Martin S.
    Hi Kevin - yes, some websites that you visit may not be able to keep up with your superfast speeds! We aim to give you the best speeds at your end, but sadly there may sometimes be bottlenecks in the wider internet.
    7:51
    Charles
    HI William - sorry for the delay in responding. Best thing to do is to reboot your Hub, then it should pick up the new speed. If not, contact the Infinity forum.
    7:51
    Comment From Lewis
    What would cause an unstable line?                                                        
    7:53
    KerryG
    @wiesiek @ Martin (not S) thanks for your questions, but as they're individual issues we can't pick them up as part of this chat. Please post in the forum and we can help.
    7:53
    Comment From guilbo
    Apologies in advance for my ignorance. If Infinity is installed does the 'phone continue to use copper all the way to the exchange or does this also go over fibre?
    7:54
    Charles
     Hi lewis - the most common cause is interference on your phone line, in which case DLM will moderate your BB speed until the line stablises. There'smore lot of info on this at the Infinity FAQs on BT.com
    7:54
    Martin S.
    Hi Guilbo - good question - yes, the phone still uses the copper.                                          
    7:54
    Comment From Paul (Heanor)
    Will downloading from such as Xbox market place or apple store as examples max out the connection?
    7:55
    Comment From Kevin
    Thanks to Martin, Kerry, and Charles for all your answers to the questions very much appreciated and a credit to BT Kevin  
    7:55

    Hi everyone
    Just a reminder that we have our Infinity Expert chat this evening at 7pm.  If for any reason you can't make the chat, you can PM me your questions in advance and we'll try to include them.  There will also be a replay available of the chat here on the same post after the event.
    Thx
    Kerry
    Retired BTCare Community Manager - StephanieG and SeanD are your new Community Managers
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Firefox updated to latest version, now I can not enter data in a discussion board dialog box in Blackboard. IE8 had same problem, change to compatability mode and IE functions. Any fix for firefox?

    Am using Blackboard to teach classes at college. Have not updated firefox at college, works great. Wife hit yes to update to latest version last week. Now can nan not reply in the discussion board, the curser is not recognized in the dialog box.

    Try to disable hardware acceleration in Firefox.
    *Firefox > Preferences > Advanced > General > Browsing: "Use hardware acceleration when available"
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • The xfce-4.4 themes contest discussion

    As stated on http://blog.archlinux.org I posted the files for the contest on my server: http://arch.justdreams.net/xfce44-themings.tar.gz
    I recommend to either fetch shadowhands xfce4-svn packages or the set I offer here http://arch.justdreams.net/xfce4-pkgs/
    I use it already for daily use and didn't encounter serious problems.
    The things you should consider if you like to add an entry.
    · a usable, nice WM theme not too small and not too large, fitting for users from laptop sized screens to dual widescreen setups.
    · a background image, that doesn't steal focus from work (read: no strong contrast, everything in like colors, makes it possible to use (semi)-transparent terminals, scales well over several desktop sizes, also fits on non 4:3 screens)
    · a nice gtk-theme using gtk-xfce-engine (read: come with corporate colors, don't waste space but have usable handles) gtk-xfce-engine stays part of 4.4 (there were discussions to ditch the gtk-xfce-engine in favor of gtk's new standard engine clearlooks)
    · a nice splashscreen theme (no real reglementations apart from colors)
    for xfwm4 themes you wanna read http://www.xfce.org/xfwm4-theme-howto/
    Xfwm-4.4 has some new features:
    - you can use svg instead of png files (check: http://foo-projects.org/pipermail/xfce4 … 21447.html for some details)
    - you can replace the menu button by adding "show_app_icon=true" in themerc
    The files you find in my tarball reflect the way I was working:
    - create the design
    - split design into the shape parts (provided by the xpm picturesthat can actually pick up gtk colours) and the shade parts(transparent pictures on top of xpms either png or svg)
    - build the actual buttons (shape, colour etc)
    - I exported the xpm from gimp and used a whole bunch of sed lines to flip colours to get the pressed and -active state (se the shell script in te directory for details)
    The background image isn't tricky.
    I added my gtkrc file in the tarball. It was mainly created from studying other gtkrc files since I didn't find some serious documentation on it.
    The splashscreen is pretty much straight forward. I added a .blend file for a rendered Arch symbol. You don't have to use it. The old theme used the balou engine - you can use any other or write your own. Doesn't matter.
    XFCE-4.4 is at rc1 at the moment. I think it's gonna take another month b4 it hits the final. After that we will have a poll at the forum to figure which theme the users like best.

    rezza wrote:
    Cimi wrote:
    Yeah thanks! I think you can redraw buttons in rezlooks and use my function with CL_CORNER_NONE to get better look with squared theme.
    Anyway what have you *stealed* from my works? yes i like that someone appreciate my works but it's always not fun thinking you've worked for days and someone *copy* your code. I hope this *steals* are originals since that could be an improvement not a simple copy! My engines are based on rezlooks/clearlooks but i've done a lot of original work for them!
    "God bless opensource" as you said, I totally agree, expecially it the ways it comes with original things and not copies!
    Hehehe, by "stealing", I only mean stuff like using that function to draw rectangles instead of just cairo_rectangle, stuff that you suggested anyway... most of the original stuff you do for Murrine would be wrong for Rezlooks anyway.
    Yeah, I'll chat to you on IRC sometime soon, we can discuss some things. I've been very busy with real life recently, haven't had a chance to do any work on Rezlooks for a while, I am still planning on releasing 0.7 at some point though... And yeah, that collaborative engine we talked about will be awesome
    Ok I just want to focus that murrine_rounded_rectangle has to be rewrite for with the next release of cairo (1.4.0) that will be released the next month will have a great performance improvement where lines are drawn aligned. In the current cairo version there's a bug in cairo_stroke which is twice slow than cairo_fill, so unless you fill the stroke of unaligned lines appears slow as aligned ones.
    With next cairo release the "stroke bug" will be fixed and we'll have to rewrite function to get the new performance boost.
    I had found occasionaly this bug yesterday when i was stripping down murrine toghether with benzea and thos, gnome developers.
    If you see in the gnome cvs you'll find new fixing in a lot of engines that get twice as fast by implementing cairo_fill instead of cairo_stroke, waiting new cairo release for reverting it back...

  • My introduction and a hardware discussion.

    Hello Adobe forums.
    Its nice to meet you all. This is going to be a heavy first post, hopefully it will bloom into a great discussion.
    I have been reading and learning and just wracking my brain around all the great info here for building a NLE system.
    For starters let me introduce my self, I am Erik, and I have been a long ago user of Premier. In fact I was in undergrad when i made my first cut and ripple delete. that was 1999 and I think there wasnt even premier pro, my memory recalls premier 7 or something, then a year into college it changed to PP. I might have that all mixed up too.
    So anywho, cut on adobe all thru undergrad and then went to grad school and learned the Avid system. I have no hang ups about either system, in my experience a cut is a cut and a dissolve is a dissolve no matter what system makes it.
    I am now released from grad school and am out on my own again, in my life I will never be able to afford an avid system like our school had, with a nitrous, composers in the big lab and a huge audio booth with avid something for multi track mastering. I want to touch back to my roots there for I have chosen to return to adobe, in the flavor of production premium.
    I am excited to see what's different and also about being able to work with out rendering, I remember the days when in order to see anything i had to first render, make a tiny change then render again, you all know this cycle too well i am sure.
    I am a simple one thing at a time guy, independent, I dont unless specifically asked edit for clients. I write my shorts and full lengths, shoot them, edit them and play on the festival circuit.
    So that is my intention for my NLE system.
    I will say I am exceedingly happy with a lot of the info on this forum. In school sadly we are only taught the artisan side of editing and those areas, the digital science end is left to our own exploration. since starting my research I went from the basic concept of data rate of the camera and how big a memory card I need, to the more important how fast the memory card can write. Also applying this knowledge to the concepts in the computer for the NLE, so a big thanks to the guys I see adding valuable info such as, Harm, ADK boys, Videoguys and other members with great input. Thank to you all.
    After all that lets talk about the prospected build.
    CPU: 3960, socket 2011.  I was satisfied with a lga 1155 but you all convinced me i can have a longer living machine with room for improvements over the next few years.
    MBO: ASUS X79 sabertooth.
    Ram: Gskill ripjaws Z 1600  64gig pack.
    GPU: asus gtx 680 4gb ddr5
    ASUS dvd bruner/ drive sata
    Cooler Master 1200w silent pro gold
    Case: Cooler Master haf 932 advanced
    Cooling: Cooler Master Seidon Liquid cooler.  I wanted air cooling but in order to allow room for the ram this was the best solution.
    SSD1: OS and programs, Intel 335 series 240gb, I know many will say thats larger than i need, but it works for me.
    SSD2: Render and export, Intel 335 series 240gb
    Hdd1: Projects, 1tb wd black caviar 7200rpm sata 3.0 32mb cache
    hdd2:  Cache "same as above"
    hdd3:  Media"ditto"
    Now as I explore the MB more and more I have learned that there is an extra 2 sata 6 on the MB. AS learned from Harm in another post those 2 extra satas are on the maverick which shares with the gpu, however this MB does not suffer a performance loss of the gpu if i was to use those two slots for later drive expansion. Again for later when money allows.
    Now lets discuss my personal work flow.
    I shoot nikon d800, with a Pix 220 external recorder. I use DNxHD codec at 220Mbs @8 bitdepth.
    My editing style is one thing at a time. I am a simple man, when i cut, i cut. I don't have the multitasking ability to cut one project while doing effects in AE and render in the background. Just too much for me to do at once.
    I am a patient man, and like i said above I dont have clients so when I render/export I usually just walk away or go eat/sleep whatever. My time is my own so my deadlines are for festival entries. Of course I want as quick as possible, who would turn down speed?
    Going back to one thing at a time, this is where i became strange from my fellow students, when I am finished with a project I am done. I dont go back and tweak like many of my former colleagues. When I make the export, bar any major problems, the video file is placed on a back up external hdd and a disc, then the work computer is formatted and ready for the next project.
    Me thinks that covers all aspects of my workflow, if there is anything more specific you need to know please ask.
    My questions for discussion.
    first and foremost, look over the parts and please point out any things you see as funky, missing or things that will have issues that you learned from your experience.
    I know you will all suggest a raid0 some where. For this point in time I would like to stick to single drives with single tasks to keep them from reading and writing at the same time or at least to a minimum. I like to have stability of my data, but I also understand that perhaps there is a speed requirement for my codec to play back smoothly. So if I must, I am open to raid0 in the future when i can afford a stable backup of all the stuff.
    Leading to my next question. Of a few posts out there in adobe forums, the general idea is a hdd can playback pretty heavy duty video if the hdd is purposed for video only. I am using 220Mbs would the WD CB be able to handle that if dedicated?
    please look at the intended use for my drives, I am only copying what i have seen as advice on the forums, but would like some input as to the how and why you would make one drive as the cache, media and projects drives. any other suggestions for what would be a better use of single drives?
    i need your help to educate me in some things i couldn't find on my own. Several times i see members talk about streams, is a stream meaning playing the timeline in multiple monitors? or is it also refering to multiple video tracks. video 1,2,3,4, playing at once?
    Are filters considered streams? since i shoot dslr i have to automatically use 3 filters off the bat, rolling shutter remove, color, and a touch of sharpness. sorry for the basic info like i said i was taught the artisan side of editing first.
    I am very used to taking my footage from the camera storing it, then importing and transcoding in the Avid to a low low bit rate to make the editing smooooth. A bit rate of 36Mb or so, then after picture lock, connecting with my orginal media for the color correction post effects and export.
    since it has been sooo long and I have learned so much, I would assume that PP allows for this type of online off line editing style, does it?
    Personally I would rather not have to transcode and edit natively, which as I can see, is what adobe is selling since cs5
    I think thats a great place to stop. You guys dont need to write me a text book for an answer, like i did above, please point to links and I will read. If you fingers really want to type away and I will read it too.
    Thank You all for your time and input.
    ESR

    Well, I don't like to make a thread and then just leave it unfinished.
    The beast is built, runs cool, looks cool and in my experience is blazing fast even at stock speeds.
    I have not begun to overclock yet as I dont fully understand how and I am researching the how tos and theory behind it. I dont want to go changing voltages and cook everything. Ill get there though, one day.
    No major build issues, in factthis is the first machine I have built in 13 years, and back then usb 2.0 just came out and the standard device connect was IDE ribbon, plus a 200gb hard drive was THEE monster, for the public that is.
    For those of you out there looking at this forum and nervous about assembling your first PC, I say to you, do you research, take you time and make sure all parts will work in balance with your intended use and then assemble.
    Other than childbirth, the simultaneous feelings of terror and excitement are something you must experience, its the ultimate high.
    I have waded thru some issues and a learning curve in the UEFI bios these days. Like I said above, last time i built a computer  there was no bios, I used to have to put the jumpers in the right place. I kinda miss that, but dont get me wrong, on screen bios, woof, i love it.
    I would like to discuss some things with you guys as there are some oddities I want to root out.
    First, I noticed that running asus utilities, such as, gpu tweak, ai suite ii, conflicts with adobe software.
    How? it slows it down a bit here and there, and it seems to cause some crash, force quit not bsod, when closing adobe programs. what happens and how i know a crash is coming is when closing PR, the second monitor will stay full screen on the last image and not move. If i dont hit the windows button or alt tab to another program it will sit there for hours, after the tab or windows key then windows says it stopped responding and to force it to close.
    any one else having similar issues? or any recommendations as to some setting in windows/bios/adobe that i may have over looked.
    This only happens to me when i have ai suite and gpu tweak open. all other times with out those programs running adobe is smooth as glass.
    the other weird thing I have noticed on several forums is the Asus utilities programs are buggy. I was experiencing incredibly loooong lag after boot up when having the ai suite ii on the active services list. it was strange, boot into windows was fine but it seems like the suite either has in incredible amount of files to open or it just conflicts with windows.
    here is the exact scenario, windows welcomes you with the sound, you wait a second to react, no hour glass, open the win tab and select either computer, or resource manager, when your me and trying to see what is making the system work so hard and long, the tab sits there for 1min doing nothing, then drops a bit leaving the graphic glitches and sits there longer. finally your window pops up and then everything is hunkey dorey till your next restart.
    after disabling anything asus in the services tab i have not had this issue for a week now.
    do you guys with asus MBO use their software? or do you guys just skip it all together? and have you experienced these bugs?
    one thing about this long lag issue that looms in the back of my mind (even with it hopefully solved) is i never had this type of lag while on the OS ssd. After I plugged in the other 6 drives the next boot was absolutely awful. It took me 30mins to format each one, due to i couldn't control the mouse for more than second and then it would register my movement and shoot me across the screen so i had to baby step it back to the drive format window.
    After getting all the hdds formatted it made the lag intermittent like stated above.
    all drivers are current, ssds are on latest firmware. I had a fight with the marvell though, it would always register my two drives on it as unpluggable devices and i could actually click safely remove them and the would disappear. but after reading and researching i got it all setup right. I mention this because it bothers me in the back of my mind even though the issue appears to be solved from the drive end and the asus software end.
    share with me if any of you have had this type of experience on your build and what you did to overcome it incase i missed a step in bios or in windows setup.
    to clarify further:
    I run ahci mode on intel and marvell. not a raid man.
    the ports are filled as such.
    intel sata 6 has my os/programs ssd and the render/export ssd.
    the asus dvd burner is on a intel sata 3
    the other 3 intels are just wd black hdd
    the marvel has 2 additional wd hdd.
    like i said the massive lag cam after i plugged all that in, formatting made it intermittent and removing asus software seems to have solved it. just looking for experiences and any missed steps.
    second wierd thing is, and perhaps this is why you guys call it QUIRKtime. I can not export dnxhd quiktime format to my render/export drive. It is a intel 335 ssd with latest firmware, (sorry Harm, the specs were great and the price was too) i have all permissions on the drive, but every time i try to export to it in that format i get the export faild can not create source file. All other formats work with out a hitch, just dnxhd quicktime at any resolution.
    and lastly, i must be an idiot but i cant seem to get PR to render my audio effects, or that there just not big enough to place them on the drive. its odd, PR is set to have audio previews on its own HDD, and PR creates the folder for renders/previews but never puts anything into them.
    Also when i click render audio, its instant playback, faster than i can hit home and l. I have tried to make the files complex with many many filters and effects on audio but no dice.
    exported time lines, and sending projects to SG, AE, audition everything works just fine, but its like i will fill up my audio previews HDD with nothing but empty folders. anyone had this issue before? I have settings set to render audio at the same time as video.
    those are the only bugs as of now to report. this sytem like i said at stock speed is blindingly fast for me and my work flow, I see a loooong life for this computer.
    thank you for reading and thank you all for your input on my little issues, it will save my hair.
    Erik.

  • How to log in with my old Apple account? I forgot my pass and I did change my apple ID before canceling first?? I am from Croatia so did folow al the discussion and the to resolve the problem but no luck. Can not call from Croatia the Apple help desk

    How to log in with my old Apple account? I forgot my pass and I did change my apple ID before canceling first?? I am from Croatia so did folow al the discussion and the to resolve the problem but no luck. Can not call from Croatia the Apple help desk.i did try all the options but I can not find the phone number to call from Croatia,
    I can not change my Apple ID to the old mail (not possible!)
    The old mail don't accept the new password..
    I can not delete the Icloud all the time asking my the password of the old mail!
    I realy need help

    You can not merge accounts.
    Apps are tied to the Apple ID used to download them, you can not transfer them.

  • "One or more field types are not installed properly" when I try to add a second discussion board web part to a page

    I have a SharePoint 2010 site with two discussion boards. I added one additional field to each of the boards: a lookup to another list to link the discussions to individual projects. I need 2 different boards because they have different posting permissions
    (one is open to all for comments, and one is open only to the project team to post but everyone can read).
    When I go to the pages for each of the discussion boards, they work fine.
    But I'm putting together a page for individual projects, and want to have web parts for both discussion boards on the same page, showing the discussions related to the selected project.
    I am able to add one of the discussion boards to a web part in the page, but when I add the second discussion board to the page, the new web part contains:
    One or more field types are not installed properly. Go to the list settings page to delete these fields.
    Correlation ID: blah blah blah
    I've searched for similar postings, but mostly I see this error message related to migration from 2007 to 2010 -- this is not the case here: I created both discussion boards, and the whole site, in SP 2010. I've also found this message related
    to coding errors using SPQuery. I am not doing any coding here, just using the built-in SharePoint 2010 Edit Page -> add a web part -> select the discussion list.  I tried doing it from SPD with the same result. 

    I figured it out. I was using ?FilterField1=fieldname&FilterValue1=value on the URL to the page to pick out one project number. The web part I was trying to add was for a list that did not have that particular fieldname. I didn't realize that would matter
    since I was using the Connections -> Get Filter Values From to get my filter values from the main web part, which does have that fieldname.
    I added a field with that fieldname to the other list and set a workflow to copy the lookup value of the project number lookup field into the new field. Now all is working fine.  Sorry for the wild geese in my original question.

  • Changing Header and Footer in Discussion Channel

    Hello,
    I need to change the header and footer graphics and links for the page that displays when you search for Discussion Channel topics and displaying Ciscussion Channel posts. I have been looking in the DiscussionProvider directory and I am now looking through the SearchProvider directory. Does anybody have an idea of the locations of the Header and Footer files?

    I am sure someone in this forum has had the desire to change the headers from the default of SUN ONE Portal Server and has accomplished this throughout their implementation. Please help! I have succeeded in some containers like the JSPEditContainer so when someone edits bookmarks from a BookmarkProvider channel they see a header that I define, but not in the SearchProvider nor the DiscussionProvider directories. I have seen no mention or <include header.jsp> tags in the jsp files for either of these providers, and I have copied header.jsp and menubar.jsp to both of those directories but it is not picking up the files. Do these containers find the header and menubar.jsp file contents from another location?

  • I can't find "Define" option in iOS 6.1.4 in iPhone 5. Tried all discussed tricks, all in vein. Please help!!!

    I cannot find that "Define" option in my brand new iPhone 5, after updating to iOS 6.1.4. I have tried all discussed tricks of changing language, rebooting, then "define" option appearing and downloading dictionary. And then reverting back to English. Nothing whatsoever worked for me. It's quite annoying for me. Please help how to get that "define" option back, and download the default dictionary!!!

    Only this time, that "define" appeared n French. I downloaded the dictionary successfully, &amp; then reverted back to English. Only to get disappointed that in English, that option is still missing. I simply don't know how to import that option from French to English.

  • Importing to Discussion Board Post from legacy source

    Hi All,
    Im sure im not the first to wonder or ask this question but here it goes.
    We have recently moved out intranet to SharePoint 2013. We have rebuilt from the ground up using many of the out of box solutions as well as some third party apps and web parts however these is one aspect that is stumping us.
    On our old intranet we use a SQL based forum/discussion board package which has
    about ten years worth of posts, surveys, Q&As etc. As it is SQL based it is very easy for use to query and pull this legacy data however
    we cannot find a way to import into SharePoint. We do not expect to import it all but would like to import at leas the last 12 months of submitted
    data with at least basic fields like Title, description/content, tags, post date and post user. We do not mind other metadata being striped out like voting etc.
    We have dug deep into the SharePoint database files to see if we can directly insert but
    it is very complex and almost certainly not supported. We was also hoping for a discussion board data list view so we could bulk cut and paste. This is not ideal but would at least be a better option than manually inserting each post.
    Does anybody have an idea where to start if at all possible. 
    Mark

    Won't keep me logged in,
    This is a server problem. In other words, "don't adjust your dial!"
    spinning balls,
    All this means is that the rendering is slowed down by something in the design of the website. If it is a thread with over 500 posts, you probably will have difficulty viewing it, unless you have a high speed internet connection with low latency, enough hard disk space to cache the files, and/or view threads in tree mode. To use Tree mode, go to My Settings, and select Tree View under Topic Page View in the General SEttings.
    Bad Request
    Sometimes will happen if your internet service provider is behind a backbone with significant peering issues.
    So how big is your hard drive?
    How much free disk space is there?
    Have you tried to empty the browser cache?
    Does this issue happen with short threads as well as long ones?
    Do you have any system modification software such as Speed Download, PthHelmet, or other browser enhancement software?
    Are you sure all your software is known to be Snow Leopard compatible?
    See these two pages about compatibility:
    http://snowleopard.wikidot.com/
    http://www.macintouch.com/specialreports/snowleopard/slcompat.html

  • Bullets disappearing in discussions?

    Has anyone else noticed that bullets are not appearing in discussion threads?  for instance, I made the following with bullet pint lists:
    Bullet 1
    Bullet 2
    Bullet 3
    it looks fine in the editor but there are no bullets or indentations when it's posted.  I haven't tested numbered lists yet, so let's do that now.
    Numbered 1
    Numbered 2
    Numbered 3

    It would appear to be a problem with the cascading style sheets which define how all the components of a page on this site are displayed and dates back to the last round of maintenance (and doesn't affect the initial post in a thread). As Klaus says efforts are being made to bring the matter to the attention of the hosts.
    What has generally been working for me is to create block with a list surrounded by text
    Bullet 1
    Bullet 2
    Bullet 3
    indent the whole block in the advanced editor, then unindent the surrounding text.
    The same trick can be used if you have a numbered list with 10 or more items, otherwise the initial digit is cut in half.
    tt2

  • Attachments to discussions-this forum?

    Attachments to discussions-this forum?
    My question is complicated. In order to ask it, I need to attach a Word doc and a PDF to illustrate my problem.
    Is it possible to do this here and, if so, how?

    Sorry, users cannot attach files in this forum for security and copyright reasons.
    To share a file, post it to a cloud service (e.g. Dropbox) and paste the link in your question. Be aware that it will be visible to the entire world, so don't include anything sensitive or personal.

  • Discussion Service is not working after the upgrade to 11.1.1.2

    Hello,
    We have built our custom webcenter application using webcenter framework 11.1.1.1, our application uses out-of-the-box webcenter services like discussions, announcements, and etc. After the upgrade to the new Patch Set 1 (11.1.1.2) the discussion service stopped authenticating the logged in users, however it works for anonymous users.
    We are still in the development phase, therefore all the registrations of webcenter services with our application don't use WS-Security. Please advice and thanks in advance .
    Best regards,
    Hasan

    Please let me know , How we can reinstall apple mail ? .
    1 . We updated OS to mavericks few machine in last december and still does't works SMTP (Out going mail) on those MAC.
    2.  After that most recently we updated OS to mavericks few machine those are working will with SMTP server .
             a)Not showing any SMTP connection in TCP trace ,
             b) Connection docter every time Says "Connecting to the server "
    3, Then we have installed thunderberd (another mail) client on maverick os, which OS related to apple mail client not woking . It seems other mail client is working well with SMTP server .
    Please help me .
    Thanks,
    Ranesh..

  • Some help please navigating these forums and a little discussion as well?

    There are a few questions I’d like to post, but first I need to determine how to use this newer style of user-to-user forum. Yeah, it’s been around a few years or so, but I’ve seen it take over the more traditional message board systems like v-bulletin and phpBB. Those boards were easy to navigate, as the forums, categories and topics were presented in a typical directory tree structure (even though the built-in search functions leaved a lot to be desired).
    Now the trend has shifted to formats such as this. While some retain some semblance of categories and topics (discussions), others seem to abandon this altogether in favor posts or discussions being related via tags or keywords. Google is the worst offender – forcing the user to select up to 4 pre-defined descriptors when creating a new post.
    Also confusing is how the terminology has changed. The forums are now calling topics, discussions. But they end up containing even less actual discussion on the topic and have de-volved into simple questions and answered. This is reinforced by the use of buttons to compel the original poster to designate responses as helpful or correct answers. This I would guess is in response to the myriad of answer seekers posting questions, receiving several helpful replies and never going back to say thanks, thus, the threads become all but useless for others who experience and seek out solutions to similar issues.
    The new format also usually starts out with “ask your question here” which is just another way to say, “hey, how about at least giving the search a try before asking a question that’s been covered before”.  Because many self-contained search features just don’t work, I can see why users just skip over it. But, what they may not know is that you can use Google to search a specific site. Forum, or blog which usually works pretty well. I’ve done this on a number of occasions, only to find the response as “this question has been answered here a hundred times – try searching”. If the responder is feeling generous that day, he or she may also present a link – a google search link that includes keywords.
    So, here I do see the initial ask your question box, then underneath that, a bunch of icons that represent particular products/topics. I start searches using more keywords, the reduce them If there are too many results. This gradual decline works well for Google, but here at Apple Support, I went from over 700 results to just two by eliminating all but the two mandatory keywords. I will do some more searches and post in the appropriate section, but my gut reaction is that it would be hard to believe that I’m the only person who has ever had this question.
    So, then – what’s the best and right way to use this new forum?
    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
    A BRIEF HISTORY OF ONLINE MESSAGE BOARDS
    I’m turning the double-nickel this year, so I’ve earned the right to gripe a bit. I don’t know everything, but for those of you youngsters, do yourself a favor a read up. If you truly are a techno-phile, you’ll find it at least somewhat interesting, at least enough to do a little research. Plus, this information isn’t all that old.
    The first online community I was exposed to was the BBS – Bulletin Board System. I had just bought my first PC, a Tandy, and the sales guy sold me a modem and gave me a number to call to connect to his BBS. I installed the modem, dialed the number and for the first time heard the annoyingly beautiful sounds of modems connecting. The, almost like “Do you want to play a game?”, text appeared on my monitor and I was hooked. The BBSes were local – to avoid long distance calls – and operated by those who could afford a second, dedicated computer and phone line. Usually, only one person could connect at a time – browse the discussion topics, leave a post to add to the discussion, check private messages (email) then log off.
    News Groups were the next form on online interaction I was introduced to. These required a special server running a dedicated protocol and a new reader, usually integrated in with an email client like Outlook Express. Each group was a specific topic – for example, Microsoft groups may have had a couple dozen or so groups covering topics like Windows 95 or networking, other commercially sponsored groups, or self-created groups. Like a BBS, you would log on, catch up on unread messages, respond to some and move on. It was in the News Groups where I learned how to program web pages to connect to a hosted database and many other things, thanks to the expertise and kindness of strangers. These groups soon became the territory of spammers, not to mention the real ugly recesses of the internet – international folks sharing “content” that the work obscene can’t even begin to describe. ISP’s soon dropped news groups from their services and they went away.
    By this time however, the world-wide-web was now in full swing. We no longer needed AOL or Prodigy to get on the Net, just an ISP and browser. Broadband was becoming available in select markets. Web-based bulletin boards sprang up all over, filling the void that the news groups left behind. They evolved, but kept to the simple structure and format for a good long while. As the cost of web hosting came down, and the availability of online databases went up, and open source application became better and more robust, anyone could incorporate a forum into their site with little time or expense.
    Social Media was on the rise. Sites came and went. From Friendster, to Myspace, then finally facebook, Twitter and LinkedIn. The net also settled in to a short list of other content sharing sites – YouTube, Flickr, Instagram. These took over the social discussion aspects of the online forum sites. That left the forums to take the only remaining role of software and product support – both as an extension of a company’s support solution or user-to-user help and support.
    On more than one occasion, I’ve tried to engage other users in topical and conceptual discussion in these groups, but it seems that they’ve already used their energy for that keeping up with their social media obligations. Facebook groups get lost in the multitude of pages. So end user support groups have settled into Q & A, mark the answer as correct them move on. Then another person comes along with the same question, enters it into the box, sees the first ten “pertinent” results that don’t answer the question, posts the question, and the cycle continues.
    If anyone has read this far, I commend you! Reading is fast becoming a lost art. I know it’s hard to read off a computer screen, easier on a tablet. And while I live my gizmos and gadgets, I have to still at least once in a while pick up a real book. I’m perfectly satisfied with my iTunes system with the only issue being the quality of any downloaded music. It’s better than it used to be, but CD’s have superior sound. Blu-ray Disc has superior sound and picture.
    I did purchase several books from the iTunes Book Store. But why? I could have bought them anywhere and read them in iBooks, but not the other way around. I had to sell my iOS devices. And now I can’t read my books. But that’s another story, for another day.

    Slip Jigs
    Contributors here so far are the cream of the crop...
    As an overall reaction to your treatise, I agree. I also judge that you - like me - may have some experience and skill at UX design (User eXperience - usability design, for the unwashed masses).
    First, let me commend your use of the WHITE SPACE that Apple graphic designers have so kindly provided. Looks very much like a paper page full of easy-to-read-SERIF-FONT text - it is clear you have experience with design concepts.
    As a tribute, I will post in your style - although our compose pane here is not quite WYSIWYG, I am hoping that line spacing will sort itself out, if not I will remove my attempt at bucking the system - but it may time for you to get some new optics
    you said:
    " ... v-bulletin and phpBB. Those boards were easy to navigate, as the forums, categories and topics were presented in a typical directory tree structure... "
    Agree that vBulletin, etc. WERE easy and familiar - but what is this structure but lipstick on that pig - see SITEMAP | ASC  (tt2's excellent UserTip). The digital directory tree is merely an adaption of the familiar Fileroom of old... a room for files(computer), file cabinets w/ file 'folders'(folders) and files(files). Apple in the form of Jobs/Wozniak (actually Xerox, but I won't quibble) was groundbreaking in the introduction of the GUI to the masses. [see your comment on being forced to learn a new way of working... has always been thus]
    Let me add that the lack of Apple's implementation of the stock features of "Sticky" threads - Announcements, Hot Topics, etc., is a miscalculation. The CATEGORIES above the Using ASC list of threads - "Announcements" and "Community Events" - baffle me as to their usefulness as I can see neither when I click 'em, only some "filtering" of what is in the "Feedback about Discussions" (?Feedback ?about? Disscussions?) Category.
    you further said:
    "... the trend has shifted to formats such as this. While some retain some semblance of categories and topics (discussions), others seem to abandon this altogether in favor posts or discussions being related via tags or keywords... "
    Kids these days... => iDevices (generic for handheld smarty-devices of any stripe) are responsible for the VISUAL graphic design conventions... no more teensy-weensy cursor - but BIG FAT FINGERS.
    A good suggestion to submit at Support_Feedback  might be to improve the 'Smartness' of the search capabilities by REQUIRING tags to be attached by the OP (offer suggestions if they wish) AND FURTHER, allowing other users of status to ADD tags (see your ¶ #2) - my estimation of the ACTIVE SEARCH is that it is looking for matching terms in the title of a thread, but I have no proof - anecdotal or by documentation at JiveSoftware.
    additionally you said:
    "... the use of buttons to compel the original poster to designate responses as helpful or correct answers. This I would guess is in response to the myriad of answer seekers posting questions, receiving several helpful replies and never going back to say thanks, thus, the threads become all but useless for others who experience and seek out solutions to similar issues. "
    I have no experience with other enterprise solutions, but the scuttlebutt on Jive is that it is the best in the business at Community Collaborative WorkFlow Software for Big Enterprise. We here unfortunately have been given use of a mere pittance of Jive's features. Apparently the MARKUP buttons have a really valuable purpose in the complete package of Jive workflow management. Here, merely a system for rewarding helpers. The green icon goes un-noticed by most and the OPost is likely irrelevant to most individual's issue. Regarding the latter portion, you can't change human nature. Some folks just aren't team players.
    you continued:
    "... The new format also usually starts out with “ask your question here” which is just another way to say, “hey, how about at least giving the search a try before asking a question that’s been covered before”. Because many self-contained search features just don’t work, I can see why users just skip over it. But, what they may not know is that you can use Google to search a specific site. ... "
    This particular issue of "Why do folks not go to the dadgum forum related to their device/software?" has plagued me since actively taking part here. My maladies prompted ME to go directly to the forum/sub-forum where they belonged. Clearly "My iPhone is a BRICK - how do I UN-BRICK IT?" does not belong in this forum - Using ASC - but thousands of similar questions land here - it MAY be because the DEFAULT forum for un-PRE-visited forum at SUBMIT.
    The WELCOME page has the preferred path - a "Search or ask a question" field and the teeny -> New to the Community? Start Here.  link (actually Tutorials )
    -- neither of which content does anything to coach the new user in "How Do I Use This Joint?"
    Something akin to "Pick the Device or Software in which you are interested below" might at least get the visitor to the right place to BROWSE their issue. Many folks are unable to craft a TITLE to their question that even resembles their problem, much less explain it in the bodytext.
    This is explained  in the javascript:; link "How to write a good question"  - e content of which I leave open AND hi-lited in a text file ready to copy/paste, for example:
    Quoted from  Apple's "How to write a good question"
       To help other members answer your question, give as many details as you can.
    Include your product name and specs such as processor speed, memory, and storage capacity. Please do not include your Serial Number, IMEI, MEID, or other personal information.
    Provide the version numbers of your operating system and relevant applications, for example "iOS 6.0.3" or "iPhoto 9.1.2".
    Describe the problem, and include any details about what seems to cause it.
    List any troubleshooting steps you've already tried, or temporary fixes you've discovered.
    Here is how obscure that information is
    It's almost as if the confusion is by design.
    HOORAY! - another fan of the Google workaround. I get pooh-poohed by some for even suggesting going off the reservation, but it works WONDERFULLY and is FAST AS LIGHTNING with even more useful post-result filtering.
    you concluded your evaluation with:
    " So, then – what’s the best and right way to use this new forum? "
    Learn the system just like you did when you first started using a computer instead of paper. It is what it is. I have a comfortable WorkFlow established using browser bookmarks and Add-ons + Google for all searches + email notifications to sort the wheat from the chaff. Not adopted of my choosing... but at least it's MINE!! Be advised that the SiteWare employs some "we will save you from yourself, helmet-law-like features" that may frustrate you from time to time - until you discover (or are told) how to circumvent them.
    Some definitions:
    Apple Support Communities = Bulletin Board Software Site
    Community = Forum
    Category = Sub-Forum
    Question = Thread
    Reply = Reply
    Your not so "Brief History..." is clearly a good evaluation and Executive Summary. Are you SURE you're not an interactive developer?
    best regards
    CCC

Maybe you are looking for

  • Select statement in a sub routine(For Sapscript)

    Hi, M unable to write select statement for my reqirement in Sap-script in Sub routine. My requirement is 1)"Your correspondent for quality" in main window of my form. For dis rule is as below "Get the 'changed by' value resord in table QCPR field AEN

  • I hate it when they change all the keyboard shortcuts. Is there a fix for these?

    I don't understand why Adobe thinks that consistency is a bad thing, but it seems that everytime they update they go jerking with my keyboard shortcuts. Last time it was Indesign, this time it Photoshop that has me complaining. Usually I can change t

  • Audio and video out of sync on iPod

    The videos I have imported to watch on my iPod appear to play well with one major exception. The audio and video are badly out of sync. I have yet to find a solution to the problem. Can someone please help me?

  • Page not loading until refresh still in 4

    I don't know if anyone else gets this and I would be interested to know why it happens. Occasionaly I will pick a site that just sits there try to load. Reselecting it makes it load no problem. What could cause this? One other thing that bugs me the

  • Ipod software update taking too much?

    My cousin ipod is locked and now im trying to restore it , When i click restore it shows "downloading 1 item - ipod software update (82 hours) Why does it takes too much ? i cant wait i need to give her the ipod today trying to restore and update fro