EBS currency translation not "posting date"

Hello,
We implemented EBS ealier this year. The currency translation date on the FF_5 postings is taking the "document date" and not the "posting date" when determining which currency exchange rate to use. This is only an issue for a couple days at month end when the document date is in the current month, but the posting date is in the prior month.
What do we need to do to change the currency selection back to "posting date". I have never seen SAP use anything but posting date. I have tried reviewing all the configuration of doc type and other set up during EBS implementation and cannot see how we have triggered this date.
Any help appreciated.
Regards,
Morgan

I neglected to mention that we are calling this currency translation through a WAD button using the SET_CURRENCY_TRANSLATION command. I did do a test by applying the currency conversion within query key figure. This seems to work. So it appears the issue is with how the WAD is processing the variable, not the query. When I display the variable in a drop down item within the WAD it does have the default value that I have assigned in user exit.

Similar Messages

Local currency is not posted into SAP

Hi,
I am using the program 'RFBIBL00' for postings into SAP from leagacy file after validations. For this I am facing one issue.
CURRENCY - USD
AMOUNT - 12345.12 (example)
for this postings , the amount in local currency is not posting into SAP and the amount in local currency is recalculated by SAP at the exchange of system.
Please help me for this how to post local currency into SAP.
regards
SVR

Hi,
Which field in BBSEG structure you are passing the amount field to? Did you use BBSEG-DMBTR?
Regds,
Rudra

F-03: Need foreign curr translation date = document date, not posting date

Hi All,
We need to clear accounts through F-03. If we use a foreign currency (local curreny is PLN), the translation date is set as posting date/clearing date: SAP default behaviour. However, we want the translation date to be document date.
We cannot change the clearing date in F-03 to document date because, if the document date is in previous period, the posting periods will be closed.
Can this be accomplised through any standard functionality in T-Code (F-03, F-44)? I couldn't find any.
Or do we need substitution/user exit for this?
Thanks for your time!

Hi This may help you,
before that I have similar Problem you had in Bank master "Bank USxxxx doesn't exists" in Production,you can reply me from my Business card,in my profile,Thx,
Note 574583 - MIRO: BADI for value date
Summary
Symptom
In the logistics invoice verification, the system derives the value date (WWERT) from the posting date (BUDAT).However, the derivation should occur from the document date (BLDAT) or the posting date depending on the country key of the company code.
Edited by: BettyCalhun on Mar 18, 2010 8:33 PM

Currency translation - not picking up currencies from master data

Hi,
We have a currency translation defined for a key figure. We've defined a variable for users to select target currency. 0currency is set to pick up from master data, but the input help on the variable is only showing currencies from infoprovider. I debugged the query and it is trying to get the currencies from the cube. Any setting that I do or update?
We're using BW 7.3 SP10 on HANA.
Sonni

HI
Once check in the BEx tab of that IO, there select the f4 option.
Regards,
Sunil.

Currency Translation on Key Date for AR Aging

Need your valuable advice!
I have created an AR Aging query including both Open and Cleared Items based on 0FIAR_C03_Q0005 standard query. However the requirement is to do currency translation to Group Currency (USD) on Key Date. This Key date is defaulted to today but the user can change this to go back in time and pull all the ARs as of that back dated key date.
I was planning to create a currency translation type on M rate based on the Key Date Variable in RSCUR. However I am confused on which variable to base this currency translation. I have several key date variables in my query such as 0P_KEYD2 (based on Posting Date), 0P_KEYDT (based on Net Due Date) and 0P_KEYD3 (based on Clearing Date).
Which Key Date Variable should I use in 'Time Reference from Variable' field in RSCUR? Would it be one of the 3 mentioned above or something else and why?
Appreciate your valuable advice.
Thanks,
Al

Hi,
Yes I do want to use the Key date from the variable screen and I am using the standard 0FIAR_C03_Q005 with slight modification including currency translation.
As I mentioned in my original post I have several key date variables in this query such as 0P_KEYD2 (based on Posting Date), 0P_KEYDT (based on Net Due Date) and 0P_KEYD3 (based on Clearing Date). My question is which one should I use if I want to base it on the specific key date variable from the variable screen? I need the specific Key Date variable technical name.
Thanks,
Al

Currency Translation not working with "Time Reference from Variable"

We have created several Currency Translations using RSCUR with a fixed "Key Date". All have been working fine until we got the request to allow a variable date for the exchange rate date. I have built a variable on 0DATE which I am putting a default date value into using user exit. This default date is the SAME date as the fixed "Key Date" which we have been using. Unfortunately when we use the "Time Reference from Variable" option and use this new variable, no currency conversion is taking place, instead it only shows the original currency values. I am 100% sure that my variable is getting a value and it is the same date we are using for the fixed "Key Date" value so both methods should be using the exact same exchange rates. The documentation that I can find states:
●      Time reference: The time reference for the currency translation can be either fixed or variable.
If the time reference is fixed, the time at which the exchange rate is determined is independent of the data. You have the following options:
○       You can establish that the time reference be determined upon translation.
○       You can select the current date.
○       You can specify a fixed date as the key date.
○       You can specify any variable that exists for InfoObject 0DATE.
○       You can establish that the query key date be used. This is determined in the query settings.
In my case I am only switching from option "You can specify a fixed date as the key date"=(Key Date) to "You can specify any variable that exists for InfoObject 0DATE"=(Time Reference from Variable).
What am I missing? Any help is appreciated.

I neglected to mention that we are calling this currency translation through a WAD button using the SET_CURRENCY_TRANSLATION command. I did do a test by applying the currency conversion within query key figure. This seems to work. So it appears the issue is with how the WAD is processing the variable, not the query. When I display the variable in a drop down item within the WAD it does have the default value that I have assigned in user exit.

Currency translation on future dates in SAP BW-BEX

Hello All We have a requirement where in user needs to do a currency translation at run time for data in future periods. For example : Savings data on a purchase order .Total savings for PO is $100,000.00 in year/month 2014/008 . We have a from and to date based on which the savings is equally distributed for each month. From 008/2014 to 008/2015. So each month savings in this case is $8333.33. This data is stored in cubes. Currency translation is based on data in TCURR and TCURX tables . We do not have future currency rates in these tables. Table is up to date only as of today . Therefore the question arises WHAT RATE WILL BEX USE TO CALCULATE DATA IN FUTURE PERIODS? (It is doing the conversion from USD to CAD - but there is no idea what rate it is using? The currency translation variable is based on 0calmonth. Please help me understand what are the default settings for currency translations in this case ? Thank your your help. Sainath Kumar

Hello Yasemin Thank you for your answer, we too think that could be the case. But is there any documentation confirming the same. Also in this case the future values will keep changing based on the availability of the data in TCURR table. Thus the report values will not be constant.Technically it makes no sense to convert rate today for a value in future. I am looking for a concrete answer from SAP saying that this is what the Bex query will do in case the future rates are not present. This will give the business a base to work with .

Currency Translation not producing any results

Hello Everyone,
I have ran into a very strange problem with the out of the box currency conversion. I have a finance app and am using the Fxtrans script logic to execute my currency translation. The problem I am having is when I run the FX Restatement package I not getting any results. LC has the correct amount that was input but my other reporting currencies show zero. My Entity dimension (which is named Company) has the correct currencies in the currency column for each company, and the InputCurrency dimension has all of my currencies listed. Everything else is the same as the AppShell app set. One last note is I do have some additional dimensions in the finance application but I don't think that would cause any issue.
My Rate cube is built the exactly the same as the rate cube in appshell app set. The only difference is my category dimension is named scenario.
I have updated all the system constants files and the script logic to reflect the dimension name changes. Everything works as expected in the Appshell application, but I just can't seem to figure out why it won't work in my appset.
I am sure I have left out some details that are needed so please just ask and I will provide whatever I can. I really appreciate any help anyone can provide.
Thanks in advance!
Nick

So I figured out the issue. For some reason the data that was in the WriteBack table for any currency other than LC was not showing up in the report. Once I optimized the application the currency conversion showed up as expected.
Has anyone had this problem before. Any known solution?
Thanks,
Nick

F.05 Foreign Currency valuation not posted automaticall to GL account.

Hi,
When we are running F.05 the GL account 3170700 u2013 Gds Recd not Invoiced GRAN is not posting automatically.
Though the GL account is matained in TO30H table and included in the variant that using for F.05 run.
Kindly help me to understand what would be the root cause for not posting automatically.
Thanks,
Hari.

Hi,
If you have a G/L account which have open item management feature, system calculate valuation for each open line items.
For example 2000100 G/L account has open item management and their line items like below.
My local currency is TRY and I posted all items in EUR after that I valuating this line items.
A. line items
Doc Currency Amount : 1.000.000,00 EUR
Posting date exchange rate : 2,00000 (EUR/TRY)
Posting date local currency amount : 2.000.000,00 TRY
End-of-month exhange rate : 2,50000 (EUR/TRY)
Difference : 500.000,00 TRY
B. line items
Doc Currency Amount : 2.000.000,00 EUR
Posting date exchange rate : 2,20000 (EUR/TRY)
Posting date local currency amount : 4.400.000,00 TRY
End-of-month exhange rate : 2,50000 (EUR/TRY)
Difference : 600.000,00 TRY
System calculate and post valuation for each line items and system using balance sheet adjustment account for posting. If you manage your account (like 200100) with open item, you couldn't post valuation on this account. System using balance sheet adjustment account and loss/gain account for posting. You can customizing this steps via OBA1 (then choose KDF).
In same account, If you don't manage with open item, system valuating the balance. In this example 3000101001 account has 3.000.000,00 EUR balance amount. When you execute F.05 with option "Valuate G/L account Balances" you can see only one line items for each account and their currency on F.05 output.
A. line items
Total Foreign Currency Amount : 3.000.000,00 EUR
Total Local currency amount : 6.400.000,00 TRY
End-of-month exhange rate : 2,50000 (EUR/TRY)
Difference : 1.100.000,00 TRY
Then when you post the valuation document, system using 200100 account and loss/gain account for posting
Thanks,
Raviteja

Skip currency translation for certain data source members

I have got percentage data againist some data source members which I do want to translate when the currency translation is executed. Is there a way to achieve this? The business rules for currency translations only have account and flow dimensions and does not include data source dimension so I am not able to filter out datasource dimension members in currency translation business rules.
Any suggestion how it may be possible to filter data source member during currency translation execution?
Thanks in advance.

Hi there,
You can use the *XDIM_MEMBERSET with the DATASRC dimension to limit what data gets translated (7.0 M SP9)
Please see [Note 1522149|https://service.sap.com/sap/support/notes/1522149] - XDIM_MEMBERSET can be used with DataSrc in Business Rule
Also, the IS_CONVERTED property in the DataSrc dimension can also be used:
The IS_CONVERTED property
The members of the DATASRC dimension will be processed according to the value of the property IS_CONVERTED, as per the following rules:
IS_CONVERTED = N: These members are ignored in the conversion
IS_CONVERTED = Y: These members are converted from LC into the desired currency
IS_CONVERTED = G (group): These members are copied from the reporting currency of the GROUP being translated into the currency member corresponding to the given group.
This obviously only applies if the translation is run for a GROUP and not for a reporting currency.
All members of the DATASRC dimension having the property IS_CONVERTED not set to u2018Yu2019 will be skipped.
Thanks,
John

I Cal does not post date chosen by point and click of the mouse.

My ICAL mini calendar on the left is not posting the date that I click using my mouse. For example, if I click on June 27, 2008 on the mini calendar on the lower left corner, my large full day event calendar will post June 26, 2008. Tried doing a reset of all sync and calendar data from DOTMAC but it will still do that. What else anyone thinks I can do.
Message was edited by: aldrinv

There are some real sharp gurus in the iCal forum area:
http://discussions.apple.com/forum.jspa?forumID=903

Foreign Currency Valuation not posted to GL account

Hi,
While I run foreign currency valuation even tick on check box of Create Posting button under FAGL_FC_VAL it show me summary report and posting tab it show me properly Debit/Credit entry on last day of month and 1st of month it become reverse as usual. But while I go through respective GL account of "Forex Unrealised Profit" and " Foreign Exchange Adjustment" account in FBL3N it does not show me line ietms result after running foreign curreny valuation. It should show the result in respective GL accounts where line items are tick in each GL accounts and valuation method I use EVR(always valuate). Why it is happening ?
Best Regards,
Anindita

Hi,
After executing FAGL_FC_VAL, do you execute Batch Input Session in SM35. If no then
When you execute FAGL_FC_VAL you will find the field called Batch Input Session name where you have to give a name for e.g. FOREXVAL. Once you execute it then system creates Batch Input Session in SM35. So go to SM35 and select the session FOREXVAL and click on Process icon seen on the top and select Display errors only and press ok.
Regards,
Chintan Joshi.

Adobe form is not posting data

Dear Experts
I am facing problem in vendor creation using adobe form .
i developed a remote function module to create vendor and used Batch Data Communication to update T Code XK01 when i execute it runs fine . when we see that vendor using T code XK03 it is seen in the vendor list. but when i create vendor through the form vendor is not created.
but when i applied the same procedure to update a z table through a function module it works. Please help what to do.
Thank You.

HI Mustafa,
The versions look ok and this should not have happened. Did you upgrade your ECC application from which you are calling Adobe Interactive forms, if so let me know ECC upgrade details.
Are you using adobe interactive forms for ESS and MSS.
Did you check the default trace, you can also activate the adobe logs from visual admin
Go to Visual Administrator for your J2EE engine.
Server -> services -> Log Configurator.
Then select 'To Advanced mode' and 'Locations' tab.
Root Location -> com -> sap -> engine -> services -> webservices -> server -> runtime -> com -> adobe_adobeDocumentServices -> AdobeDocumentServices
Please change this node to 'ALL' and save configuration.
All ADS trace will be written in DefaultTrace of server node.
After you finished your test, don't forget to change log level to 'default'
If you cannot find any useful information in default trace, please forward it to me.
Thank You,
Praveen

Exchange rate differences not posted in paralel currency

Hi gurus,
I have a difficult one. I have the followign situation:
1)     We are using CLP for Local Currency (pesos chilenos)
2)     We are using USD for Local 2 Currency (group)
3)             We have implemented the Material Ledger (USD currency)
We have a problem when we post an Invoice (trx MIRO) with different date of the good recive. The currency of the purchase order is the same as the local currency (pesos chilenos CLP).
The problem is that the posting in the paralel currency does not post the Exchange Difference between the GR and the IV, instead the posting is with charge to the u201Cprice differenceu201D.
Does any body know if it is possible to post this difference as "Exchange rate difference?.
Regards,
Santiago

Hi,
Thanks Shaubhikg. This OSS notes describes about how the closing entries takes care of the both price and exchange differences of the material procured and production variances. But still my answer is unanswered.
My worry ts that since the exchange differences were captured in accounts of KDM but not seen when I see the material in CKM3. Any more inputs from you or from other fellow brethern!
Regards,

Currency Translation in Query on InfoSet

Hi Experts,
I need to do a currency conversion from 0LOC_CURRENCY to USD on an Infoset. The Data flow is DSOs --> Infoset --> Multiprovider --> Query. I want to do this Translation on Posting date which is in my DSO, Infoset and Multiprovider. I have created custom Translation Type on Postind date (with Exchange Rate Type = M, Fixed Target Currency = USD, Time Reference as Special Infoobject = 0PSTNG_DATE in RSCUR) in RSCUR but in the Query, I cannot see this custom conversion type available, as in report the infoobject 0PSTNG_DATE is available as '<Infoset Name>__FXX' .
Is there any paricular setting need to be done on an infoset to incorporate Currency Translation on Query ? Also, if there is any other procedure available for Infoset Currency Translation, please let me know.
Thanks fin advance or all your help.
Regards,
Dibyendu

Hi,
As I want to do my currency translation on an Infoset the infoobjects do not appear in traditional format. 0PSTING_DATE has taken a name '<Infoset Name>__FXX' (like ZISCURTR__F24). How can I put this reference in RSCUR 'Time Ref' tab in Infoset option over there ? It gives only a F4 help option (donot allow to write something there) and my infoset is not available in the list. Is there any particular setting that I can do in my infoset to make that available in RSCUR F4 help ?
Please suggest.
Regards,
Dibyendu

EBS currency translation not "posting date"

Similar Messages

Maybe you are looking for