EBS R11.5 username/passwords in WLS 11.1.1.3
Hi,
I dont know is this the right category to post this thread. But, anyway, I have a application in Jdev 11.1.1.3.
We already have EBS R11.5 running in our organization. Our requirement is that, we donot want to create again usernames in weblogic 11.1.1.3 for this application.
How can I use same username/passwords of EBS in weblogic?
Regards.
Hi
No, you cannot reuse the same users from EBS on this weblogic server. Weblogic server needs to have its own users created to access your application once deployed. Or you can configure Weblogic Server with any external security provider like any LDAP Active Directory. Or you can create your own Custom Authenticator. And in this, you can authenticate the users against the EBS Security database. I am not familiar with EBS side.
Are the users created in EBS itself. Or is EBS configured with some LDAP like that. If LDAP is used, configure the same LDAP on weblogic domain also.
Thanks
Ravi Jegga
Similar Messages
-
Problem with username/password using SQLAuthenticator
I want to setup SQLAuthenticator but authentication is refused because wrong username/password.
I am using JDev Studio Edition Version 11.1.2.1.0 with integrated WLS.
As a base I take this two URLs:
http://weblogic-wonders.com/weblogic/2010/03/11/configuring-sql-authenticator-with-weblogic-server/ and
http://biemond.blogspot.com/2008/12/using-database-tables-as-authentication.html
1. I create db tables (default table names for SQLAuthenticator), but don't fill users and groups - OK
2. In WLS I create new SQLAuthenticator Authentication provider inside deafult realm myrealm - OK
3. I put this provider to the top among all three providers
4. In JDev I configure ADF Security - define Enterprise Roles to matching to the names in GROUPS table of SQLAuthenticator - ??
5. I Define Application users and roles and setup Resource grants
6. I run my application
7. In database tables USERS, GROUPMEMBERS, GROUPS I can see users and roles from Jdev, that means, at deploy time, this tables are filled too
8. In WLS I can see Users and Groups under myrealm which are transfered at deploy time and mirrors USERS, GROUPMEMBERS, GROUPS
9. In USERS table I can see password is encripted by {SHA-1}
But when try to login I am always rejected with "Invalid username or password".
Before setting up SQLAuthenticator (only default options) the logins were successful, so application shold be OK.
I try also with Plaintext Passwords Enabled and put into USERS table unencripted password, but without success.
I can confirm that SQLAuthenticator mechanism actually get password from USERS table. I replaced default SQL for getting password from
SELECT U_PASSWORD FROM USERS WHERE U_NAME = ?
to
select get_pwd(?) as U_PASSWORD from dual. In my get_pwd PL/SQL function I perform logging in I can see that this function was called.
So the problem is in WLS when comparing passwords.
Any suggestions, where to start digging?
Ragards,
Sašo
Edited by: Sašo C. on 5.10.2011 7:26
Edited by: Sašo C. on 5.10.2011 7:32The problem is solved! Crucial was hint from http://biemond.blogspot.com/2008/12/using-weblogic-provider-as.html:
The Control Flag for my new SQLAuthenticator Authentication provider must be changed from Optional to Sufficient AND
the Control Flag for existing DefaultAuthenticator must be changed from Required to Sufficient!
It seems that before SQLAuthenticator took password from USERS table, but didn't use it in the authentication process.
Regards,
Sašo -
Authentication with username/password *OR* certificates?
Hi folks,
we have to authenticate users either via username/password combo or via
certificate.
Of course, by using SSL in both cases. Is this possible with WLS 6.0? Since
I've read
that I have to configure WLS explicitly to support client certificates, I'm
rather suspiscious
if this will work.
Any ideas anybody?
Regards,
GerhardYou can use certificates for authentication if you do the following:
1) you need to implement a CertAuthenticator which, given a
certificate from SSL, extracts a user name (for example, get
the email address from the certificate and return the name
portion - [email protected] might use foo as the user name)
2) in your realm, you must have a user for the user name in
the certificate (so, for the example above, you need to have
a user named "foo" in the realm) -
How to hide username/password in JDBC program.
hi All,
The support tat I get here is simply gr8.
Can someone suggest or send me a link as to how I hide the username /password ....i.e database connection in the jdbc program so as to avoid changing the program everywhere in case username and passwd changes ?????
I simply want to change the following code
String driverName = "oracle.jdbc.driver.OracleDriver";
Class.forName(driverName).newInstance();
// Create a connection to the database
Sring serverName = "127.0.0.1";
String portNumber = "1521";
String sid = "oratest";
String url = "jdbc:oracle:thin:@" + serverName + ":" + portNumber + ":" + sid;
String username = "scott";
String password = "tiger";
connection = DriverManager.getConnection(url, username, password);
Ta,
sunnywell i kind of support what my fellow poster neeelima.srtidhar said..
Use of Connection Pooling via JNDI which is either provided by appln server or using custom built frameworks is the best method which i can think of instead of reinventing the wheel by creating a Properties file and then writing a Utility Class which ultimately endup in creating connection Object without any sort of optimal usage.
checkout the below articles for reference of how to do it.
http://tomcat.apache.org/tomcat-6.0-doc/jndi-datasource-examples-howto.html
http://www.informit.com/articles/article.asp?p=352320&rl=1
http://www.codeproject.com/useritems/pool_client_jboss.asp
http://edocs.bea.com/wls/docs81/jdbc/programming.html
http://www.castor.org/jdo-pooling.html
http://homepages.nildram.co.uk/~slink/java/DBPool/
and if you are thinking of reinventing those that could be possible using the below article
http://www.javaworld.com/javaworld/jw-05-2002/jw-0517-jdbcdriver.html?page=1
Hope that might help:)
REGARDS,
RaHuL -
Could not create pool connection.The DBMS driver exception was:java.sql.SQLException:
ORA-01017: invalid username/password
Even though I could able to connect to Oracle database using correct userid,password
and HostString using OracleClient, I couldnt able to do with connectionpool. Here
is the error message..
<Jan 21, 2003 2:27:50 AM PST> <Notice> <WebLogicServer> <Starting WebLogic Admin
Server "examplesServer" for domain "examples">
Starting Loading jDriver/Oracle .....
---------- LOGIN ERROR CODE: 1017
---------- LOGIN ERROR CODE: 1017
<Jan 21, 2003 2:28:06 AM PST> <Error> <JDBC> <Cannot startup connection pool "or
aclePool" weblogic.common.ResourceException:
Could not create pool connection. The DBMS driver exception was:
java.sql.SQLException: ORA-01017: invalid username/password; logon denied - (Obj
ectel/********@ora8i)
at weblogic.db.oci.OciConnection.getLDAException(OciConnection.java:164)
at weblogic.jdbc.oci.Driver.connect(Driver.java:112)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(Con
nectionEnvFactory.java:193)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Con
nectionEnvFactory.java:134)
at weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllo
cator.java:698)
at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.j
ava:282)
at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.j
ava:623)
at weblogic.jdbc.common.JDBCService.addDeployment(JDBCService.java:107)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(Depl
oymentTarget.java:329)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(Dep
loymentTarget.java:279)
at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeploy
ments(DeploymentTarget.java:233)
at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(
DeploymentTarget.java:193)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMB
eanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl
.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(Configurat
ionMBeanImpl.java:359)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
55)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
23)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy45.updateDeployments(Unknown Source)
at weblogic.management.configuration.ServerMBean_CachingStub.updateDeplo
yments(ServerMBean_CachingStub.java:2761)
at weblogic.management.mbeans.custom.ApplicationManager.startConfigManag
er(ApplicationManager.java:370)
at weblogic.management.mbeans.custom.ApplicationManager.start(Applicatio
nManager.java:160)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMB
eanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl
.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(Configurat
ionMBeanImpl.java:359)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
55)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
23)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy64.start(Unknown Source)
at weblogic.management.configuration.ApplicationManagerMBean_CachingStub
.start(ApplicationManagerMBean_CachingStub.java:480)
at weblogic.management.Admin.startApplicationManager(Admin.java:1180)
at weblogic.management.Admin.finish(Admin.java:590)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:518)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:203)
at weblogic.Server.main(Server.java:35)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(Con
nectionEnvFactory.java:209)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Con
nectionEnvFactory.java:134)
at weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllo
cator.java:698)
at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.j
ava:282)
at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.j
ava:623)
at weblogic.jdbc.common.JDBCService.addDeployment(JDBCService.java:107)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(Depl
oymentTarget.java:329)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(Dep
loymentTarget.java:279)
at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeploy
ments(DeploymentTarget.java:233)
at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(
DeploymentTarget.java:193)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMB
eanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl
.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(Configurat
ionMBeanImpl.java:359)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
55)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
23)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy45.updateDeployments(Unknown Source)
at weblogic.management.configuration.ServerMBean_CachingStub.updateDeplo
yments(ServerMBean_CachingStub.java:2761)
at weblogic.management.mbeans.custom.ApplicationManager.startConfigManag
er(ApplicationManager.java:370)
at weblogic.management.mbeans.custom.ApplicationManager.start(Applicatio
nManager.java:160)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMB
eanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl
.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(Configurat
ionMBeanImpl.java:359)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
55)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
23)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy64.start(Unknown Source)
at weblogic.management.configuration.ApplicationManagerMBean_CachingStub
.start(ApplicationManagerMBean_CachingStub.java:480)
at weblogic.management.Admin.startApplicationManager(Admin.java:1180)
at weblogic.management.Admin.finish(Admin.java:590)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:518)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:203)
at weblogic.Server.main(Server.java:35)
>
<Jan 21, 2003 2:28:14 AM PST> <Notice> <Management> <Application Poller started
for development server.>
<Jan 21, 2003 2:28:19 AM PST> <Notice> <WebLogicServer> <ListenThread listening
on port 7001>
<Jan 21, 2003 2:28:19 AM PST> <Notice> <WebLogicServer> <SSLListenThread listeni
ng on port 7002>
<Jan 21, 2003 2:28:20 AM PST> <Notice> <Management> <Starting discovery of Manag
ed Server... This feature is on by default, you may turn this off by passing -Dw
eblogic.management.discover=false>
<Jan 21, 2003 2:28:20 AM PST> <Notice> <WebLogicServer> <Started WebLogic Admin
Server "examplesServer" for domain "examples" running in Development Mode>URL=jdbc:weblogic:oracle:oracle8i(server)
Driver Classname=weblogic.jdbc.oci.Driver
AClname=weblogic.jdbc.connectionPool.oraclePool
intialcapacity=1
MaximumCapacity=10
Capacity Increment=2
Login Delay Seconds=1sec
Refresh Period=15 Minutes
Supports Local Transaction=No
Allow Shrinking=No
Shrink Period=15
Prepared Statement Cache Size=10
TargetServer=ExamplesServer
Properties
user=Objectel
password=superman
Test table=yes
Test Reserved Connections=yes
Test Released Connections=Yes
I could able to connect to oracledataBase if I use
user=scott
password=tiger
with any other database user Iam getting the following error
Could not create pool connection. The DBMS driver exception was:java.sql.SQLException:
ORA-01017: invalid username/password
"Neo Gigs" <[email protected]> wrote:
By end of the error you shown:
<Jan 21, 2003 2:28:20 AM PST> <Notice> <WebLogicServer> <Started WebLogicAdmin
Server "examplesServer" for domain "examples" running in DevelopmentMode>
You are running the Examples application shipped with WLS, which I guest
the
correct DB to connect with is Cloudscape yet to Oracle, unless you make
changes to the original ConnectionPool in the examples. Anyhow, please
show
us your configuration of the ConnectionPool used when this error pops.
"Raj" <[email protected]> wrote in message
news:[email protected]...
Could not create pool connection.The DBMS driver exceptionwas:java.sql.SQLException:
ORA-01017: invalid username/password
Even though I could able to connect to Oracle database using correctuserid,password
and HostString using OracleClient, I couldnt able to do withconnectionpool. Here
is the error message..
<Jan 21, 2003 2:27:50 AM PST> <Notice> <WebLogicServer> <Starting WebLogicAdmin
Server "examplesServer" for domain "examples">
Starting Loading jDriver/Oracle .....
---------- LOGIN ERROR CODE: 1017
---------- LOGIN ERROR CODE: 1017
<Jan 21, 2003 2:28:06 AM PST> <Error> <JDBC> <Cannot startup connectionpool "or
aclePool" weblogic.common.ResourceException:
Could not create pool connection. The DBMS driver exception was:
java.sql.SQLException: ORA-01017: invalid username/password; logondenied - (Obj
ectel/********@ora8i)
atweblogic.db.oci.OciConnection.getLDAException(OciConnection.java:164)
at weblogic.jdbc.oci.Driver.connect(Driver.java:112)
atweblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(Con
nectionEnvFactory.java:193)
atweblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Con
nectionEnvFactory.java:134)
atweblogic.common.internal.ResourceAllocator.makeResources(ResourceAllo
cator.java:698)
atweblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.j
ava:282)
atweblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.j
ava:623)
atweblogic.jdbc.common.JDBCService.addDeployment(JDBCService.java:107)
atweblogic.management.mbeans.custom.DeploymentTarget.addDeployment(Depl
oymentTarget.java:329)
atweblogic.management.mbeans.custom.DeploymentTarget.addDeployments(Dep
loymentTarget.java:279)
atweblogic.management.mbeans.custom.DeploymentTarget.updateServerDeploy
ments(DeploymentTarget.java:233)
atweblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(
DeploymentTarget.java:193)
at java.lang.reflect.Method.invoke(Native Method)
atweblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMB
eanImpl.java:636)
atweblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl
java:621)
atweblogic.management.internal.ConfigurationMBeanImpl.invoke(Configurat
ionMBeanImpl.java:359)
atcom.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
55)
atcom.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
23)
atweblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
atweblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy45.updateDeployments(Unknown Source)
atweblogic.management.configuration.ServerMBean_CachingStub.updateDeplo
yments(ServerMBean_CachingStub.java:2761)
atweblogic.management.mbeans.custom.ApplicationManager.startConfigManag
er(ApplicationManager.java:370)
atweblogic.management.mbeans.custom.ApplicationManager.start(Applicatio
nManager.java:160)
at java.lang.reflect.Method.invoke(Native Method)
atweblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMB
eanImpl.java:636)
atweblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl
java:621)
atweblogic.management.internal.ConfigurationMBeanImpl.invoke(Configurat
ionMBeanImpl.java:359)
atcom.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
55)
atcom.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
23)
atweblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
atweblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy64.start(Unknown Source)
atweblogic.management.configuration.ApplicationManagerMBean_CachingStub
start(ApplicationManagerMBean_CachingStub.java:480)
atweblogic.management.Admin.startApplicationManager(Admin.java:1180)
at weblogic.management.Admin.finish(Admin.java:590)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:518)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:203)
at weblogic.Server.main(Server.java:35)
atweblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(Con
nectionEnvFactory.java:209)
atweblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Con
nectionEnvFactory.java:134)
atweblogic.common.internal.ResourceAllocator.makeResources(ResourceAllo
cator.java:698)
atweblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.j
ava:282)
atweblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.j
ava:623)
atweblogic.jdbc.common.JDBCService.addDeployment(JDBCService.java:107)
atweblogic.management.mbeans.custom.DeploymentTarget.addDeployment(Depl
oymentTarget.java:329)
atweblogic.management.mbeans.custom.DeploymentTarget.addDeployments(Dep
loymentTarget.java:279)
atweblogic.management.mbeans.custom.DeploymentTarget.updateServerDeploy
ments(DeploymentTarget.java:233)
atweblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(
DeploymentTarget.java:193)
at java.lang.reflect.Method.invoke(Native Method)
atweblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMB
eanImpl.java:636)
atweblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl
java:621)
atweblogic.management.internal.ConfigurationMBeanImpl.invoke(Configurat
ionMBeanImpl.java:359)
atcom.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
55)
atcom.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
23)
atweblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
atweblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy45.updateDeployments(Unknown Source)
atweblogic.management.configuration.ServerMBean_CachingStub.updateDeplo
yments(ServerMBean_CachingStub.java:2761)
atweblogic.management.mbeans.custom.ApplicationManager.startConfigManag
er(ApplicationManager.java:370)
atweblogic.management.mbeans.custom.ApplicationManager.start(Applicatio
nManager.java:160)
at java.lang.reflect.Method.invoke(Native Method)
atweblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMB
eanImpl.java:636)
atweblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl
java:621)
atweblogic.management.internal.ConfigurationMBeanImpl.invoke(Configurat
ionMBeanImpl.java:359)
atcom.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
55)
atcom.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
23)
atweblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
atweblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy64.start(Unknown Source)
atweblogic.management.configuration.ApplicationManagerMBean_CachingStub
start(ApplicationManagerMBean_CachingStub.java:480)
atweblogic.management.Admin.startApplicationManager(Admin.java:1180)
at weblogic.management.Admin.finish(Admin.java:590)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:518)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:203)
at weblogic.Server.main(Server.java:35)
>
<Jan 21, 2003 2:28:14 AM PST> <Notice> <Management> <Application Pollerstarted
for development server.>
<Jan 21, 2003 2:28:19 AM PST> <Notice> <WebLogicServer> <ListenThreadlistening
on port 7001>
<Jan 21, 2003 2:28:19 AM PST> <Notice> <WebLogicServer> <SSLListenThreadlisteni
ng on port 7002>
<Jan 21, 2003 2:28:20 AM PST> <Notice> <Management> <Starting discoveryof
Manag
ed Server... This feature is on by default, you may turn this off bypassing -Dw
eblogic.management.discover=false>
<Jan 21, 2003 2:28:20 AM PST> <Notice> <WebLogicServer> <Started WebLogicAdmin
Server "examplesServer" for domain "examples" running in DevelopmentMode> -
Where is username/password in webservice call
Hi,
I'm have a webservice client based on a simple WLS sample client that makes a
call of the form:
<my service name>Port port = <my service name>_Impl().get<my service name>Port()
The get<my service name>Port can optionally take "username" and "password" parameters
to allow the client to invoke a secured web service. How are "username" and "password"
passed? In the SOAP message itself, in HTTP...? I dumped the SOAP request using
the verbose option and do not see the username or password.
We want to be able to have .NET clients invoke these secured web services also
and have not been able to figure out how a .NET client specifies username/password
to invoke our web service. Has anyone done this?
Thanks in advance.WLS use HTTP basic auth. The user name and passwd are in the HTTP
header.
I know that we test basic auth with .Net, but not sure how to set username
and passwd in the .net client.
http://manojc.com
"Jack Ottofaro" <[email protected]> wrote in message
news:3edfaa1c$[email protected]..
>
Hi,
I'm have a webservice client based on a simple WLS sample client thatmakes a
call of the form:
<my service name>Port port = <my service name>_Impl().get<my servicename>Port()
>
The get<my service name>Port can optionally take "username" and "password"parameters
to allow the client to invoke a secured web service. How are "username"and "password"
passed? In the SOAP message itself, in HTTP...? I dumped the SOAP requestusing
the verbose option and do not see the username or password.
We want to be able to have .NET clients invoke these secured web servicesalso
and have not been able to figure out how a .NET client specifiesusername/password
to invoke our web service. Has anyone done this?
Thanks in advance. -
When starting Mozilla Firefox 3.6, I get an error window which opens up additionally overtop my browser windows stating:
"Javascript Application"
followed with :
"Invalid username/password combination. If you continue to get this error, try entering your email address as your username."
Obviously it is happening with one of my email addresses/usernames & password combinations of which I know the username for (which I choose not to post here) and I'm not sure where to begin looking for a resolution to this problem.I was able to resolve this by disabling (under Tools - Add-ons) Yahoo! Mail Notifier
Hope this helps some of you also! -
Using SSO username/password in java portlet for Database Connection
Hi all,
We implemented java portlet with environment Oracle Application server 10.1.2 and Portal 10.1.4
At present we are picking the database username and password and connect string in properties and our
java class is reading the properties file and connecting to database to fetch the records.
Our idea is to not to pick the username/password and connect string from the properties file or
not to configure the datasource in data_source.xml.
Our Requirement is who ever login to the Portal(SSO) our java class should pick the sso username/password and
connect to database to fetch the record(s).
Because our database users are one to one mapped to sso user(s) of portal.
We request anyone to guide us how can we do it or suggest any suitable solution for our requirement.
Thanks
Dan TeyI think this is a no-go, since you cannot retrieve a cleartext password from the OID if I'm correct.
-
How do I setup Forms not to ask RAD username/password when opening a form
Good day
I have setup oid and sso and they work I can sign on to database with an oid user using sqlplus.
If I set SsoDynamicResourceCreate=true and enter the user id and password in at the popup it works correct and won’t even ask it again
What I want to know how can set portal to use a RAD/DAS without prompting for a username password.
We need to do this for all +/- 30000 users and if so how do we do it pragmatically.
I think because I don’t have much APPS experience I basically don’t know where this must be set globally
APPS is version 10.1.2
Regards
Cliff
Message was edited by:
cliffnelGot solution in metalink note 262686.1
Goto <infrastructure :port>/oiddas
Click Configuration Tab
Click Preference Tab
Create Default RAD for database -
How do I use my WET54g with a wireless system that asks for username & password
Hotels and other systems let you use theiur wireless for a fee. You go onto your wireless laptop, and it automatically goes to a page where you pay and sign up (or it asks for a username and password), once that is done, you can use the network.
How do I allow my WET54g to know this password information, and work on the network?
thanks
MichaelThe WET54g allows you to accept a wireless signal and connect it to a wired hub. I want to intercept the wireless signal and use it on my hub.
I know I can use one computer if I connect to the signal using my laptop's wireless card, but I want the WET54g to accept the signal.
For example, currently at my office, I use the WET54g to intercept a wireless signal from the front of my building, to the back of my building about 300ft away (this way I didnt have to run wires). The WET54g then is hooked up to a hub/switch where I have a bunch of other computers/servers. Everything from the front of my building and back of the building are joined using this WET54g. The WET54g is set up to find the signal from the front of my building, and therefore it works fine.
I want to use the hotel signal, the same way, except there is no way to enter in the username/password into the WET54g, or maybe there is.. Does this make sense to you? -
A1 returning "username/password incorrect" messages on websites
I can't find other posts with this problem so I hope I don't show my ignorance here, but I can't believe I am the only one...
I recently purchased an IdeaPad A1-07 running Android 2.3.4. I attempted to update the system right out of the box, but the updater reported that I was up to date, so that should be set (I would think...). I downloaded the Netflix app from the Andriod app store (the A1 did not include it preloaded), and attempted to launch it. It launched fine into the login screen, but when entering the login info, the app returned a incorrect username/password error. I confirmed the info by logging in on through my PC to the Netflix site. I un-installed then re-installed the app with the same result. I then attempted to go to the website through the A1 browser and login there. Same result. Panicking, I attempted to use the A1 browser to login to FaceBook. Same result.
Here is the strangest part: I attempted to login to the same websites using the browser on my HTC Android Incredible 2 running Android 2.3.4, and was able to login in successfully to both sites.
Does anyone know what is going on here and how to fix it? This is a real deal breaker for me since I purchased this tablet specifically to use with sites like Netflix and FaceBook, and I really don't know what else to do other than to try to return it and get a refund. Please help!
Solved!
Go to Solution.Success! The GO keyboard app pre loaded by Lenovo wasn't the problem, but the input settings (Auto Capitalization, display suggestions, auto complete, auto space and key correction) were. Display suggestions probably wasn't part of the issue, but its just plain annoying, so I turned that off as well. I suspect that one of the other "auto" features was slipping in a character or space or two behind my back. I turned them all off, and no longer have an issue. I suspect that it was only one of them, but I would have had to run multiple experiments to narrow down the culprit, and I really don't want to bother. None of those things help me more than they hinder me anyway.
Find the settings under: settings/language & ketboard settings/Go keyboard for Lenovo/input setting. Good luck! -
i changed my sim on my iPhone n reconfigured iMessage, it configured with my number but when i sign in with my apple id it says username/password is wrong while in all other things like FaceTime, App Store it worked with the same id and password..
can anyone help me to solve this issuei just opened my ipad, started my apple account/I.D. and realized I put the wrong e mail. I was having trouble correcting my I.D on the Ipad so I went to my laptop and make the proper changes/slash e mail address I wanted for my apple ID. I got back to my ipad and try to download an app I can't because I have to sign in my apple account and I can't because it still has the irrelivant I.D/email address..
So, i did what you said.. went to setting>app store> tapped on my e mail.. it asked me to sign in (with my invalid emails address showing). I signed in with the password I had created. It said "incorrect".. I went to reset password. I reset password, tried to sign in and it says again "unvalid password".. this is getting irritating. I have been asking and no one knows what to do. -
ASA 5505 ASDM username / password
Hello everyone,
I completed the PIX 515 to ASA 5505 migration today with no problems - ok one problem with the logon for ASDM.
I'm trying no username and password - then using username and password from the 515 Pix with no success.
Anyone know how to reset the username and password for the ASDM GUI website.
Thank youUmmm,
Did you possibly try the default username/password combination? (cisco/cisco) It should then prompt you to change these settings once you gain access. I'm not familiar with how the migration works, if it transitions the user accounts over or you end up starting from scratch. Give that a try and hopefully it gets you into your new system. -
Memory and No. of Processor calculation for Oracle EBS R11 and R12
Can some one please tell me …. How to calculate required Memory and No. of Processors for Oracle EBS R11 and R12.
For example we have 50 Concurrent users and 100 named (i.e. the users which are doing only Data entry.), so how to How to calculate required Memory and No. of Processors
Please guide me on the same.
Thanks,Please refer to the following links, it may be helpful:
Oracle Applications Benchmark White Papers
http://www.oracle.com/apps_benchmark/html/white-papers-e-business.html
Oracle Applications Standard Benchmark White Papers
http://www.oracle.com/apps_benchmark/html/white-papers.html
Hardware requirements for Oracle APPS
Hardware requirements for Oracle APPS -
Problems setting up username & password for SQL
Due to the outstanding advice I recieved from this excellent forum, I have managed to overcome my first problem with declaring a new Class.
This leads me to request help with my next biggest problem:
Setting up a user GUI that takes a "username" & "password" that will be used to access a password protected database.
I am a simple bloke, with simple thought processes, so please, go easy on me...
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.sql.*;
public class DBQuery1 {
String username = "" , password = "";
public static void main(String[] arguments) {
PassDB UPass = new PassDB();
String data = "jdbc:odbc:JavaTestDataBase";
try {
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection conn = DriverManager.getConnection(data, "" + username, "" + password);
Statement st = conn.createStatement();
ResultSet rec = st.executeQuery(
"SELECT Title, ContactID, First, Last, Dear FROM Contacts "
+ "WHERE (Title='Mr') ORDER BY ContactID");
/* ResultSet rec2 = st.executeQuery(
"SELECT Subject, ContactID FROM Calls "
+ "WHERE (Subject Is Not Null) ORDER BY ContactID");
System.out.println("\nFirst Name\tSurname\t\tNick Name\t\tSubject\n");
while(rec.next()) {
System.out.println(rec.getString(3) + "\t\t" + rec.getString(4) + "\t\t" + rec.getString(5) /* + rec2.getString(1) */ );
st.close();
catch (SQLException s) {
System.out.println("SQL Error: " + s.toString() + " " + s.getErrorCode() + " " + s.getSQLState());
catch (Exception e) {
System.out.println("Error: " + e.toString() + e.getMessage());
class PassDB extends javax.swing.JFrame implements ActionListener {
String username = "", password = "";
JTextField uname = new JTextField(10);
JTextField pword = new JTextField(10);
// JPasswordField pword = new JTextField(10);
PassDB() {
super("duBe's database logon");
setSize(220, 160);
setDefaultCloseOperation(EXIT_ON_CLOSE);
JPanel pane = new JPanel();
JLabel unameLabel = new JLabel ("Username: ");
JLabel pwordLabel = new JLabel ("Password: ");
JButton submit = new JButton("OK");
submit.addActionListener(this);
pane.add(unameLabel);
pane.add(uname);
pane.add(pwordLabel);
pane.add(pword);
pane.add(submit);
setContentPane(pane);
setVisible(true);
public void actionPerformed(ActionEvent evt) {
PassDB clicked = (PassDB)evt.getSource();
username = uname.getText();
password = pword.getText();
This code generates two errors, stating:
C:\Java_progs>javac DBQuery1.java
DBQuery1.java:14: non-static variable username cannot be referenced from a static context
Connection conn = DriverManager.getConnection(data, "" +
username, "" + password);
^
DBQuery1.java:14: non-static variable password cannot be referenced from a static context
Connection conn = DriverManager.getConnection(data, "" +
username, "" + password);
^
2 errors*****************************
The code works when I remove the reference to the variables "username" & "password" in Connection "conn" call & replace them with the actual username & password, but this is not exactly what I was after. I was hoping to make the program responsive to each individual user, not set in code.
I also would like to make the program pause after the call in "main" to "PassDB" to wait for "PassDB" to exit before continuing.
I would also like to make "PassDB" destroy itself after the "OK" button is pressed & the "username" & "password" set.
If that isn't enough for you, I would really like the program to search 2 different database tables, return their values & compare them to be sure that they are the same.
When I try & search 2 different tables, as in:
ResultSet rec = st.executeQuery(
"SELECT Title, ContactID, First, Last, Dear FROM Contacts "
+ "WHERE (Title='Mr') ORDER BY ContactID");
ResultSet rec2 = st.executeQuery(
"SELECT Subject, ContactID FROM Calls "
+ "WHERE (Subject Is Not Null) ORDER BY ContactID")javac tells me that "ResultSet" is set to null 0
As always, I am extremely appreciative of any assistance you are able to offer.
Kind regards
duBedat
[email protected]This is where I'm at now:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.sql.*;
public class DBQuery {
static String username = "" ;
static String password = "" ;
public static void main(String[] arguments) {
PassDB UPass = new PassDB();
String data = "jdbc:odbc:JavaTestDataBase";
try {
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection conn = DriverManager.getConnection(data, "" + DBQuery.username, "" + DBQuery.password);
Statement st = conn.createStatement();
ResultSet rec = st.executeQuery(
"SELECT Title, ContactID, First, Last, Dear FROM Contacts "
+ "WHERE (Title='Mr') ORDER BY ContactID");
/* ResultSet rec2 = st.executeQuery(
"SELECT Subject, ContactID FROM Calls "
+ "WHERE (Subject Is Not Null) ORDER BY ContactID");
System.out.println("\nFirst Name\tSurname\t\tNick Name\t\tSubject\n");
while(rec.next()) {
System.out.println(rec.getString(3) + "\t\t" + rec.getString(4) + "\t\t" + rec.getString(5) /* + rec2.getString(1) */ );
st.close();
catch (SQLException s) {
System.out.println("SQL Error: " + s.toString() + " " + s.getErrorCode() + " " + s.getSQLState());
catch (Exception e) {
System.out.println("Error: " + e.toString() + e.getMessage());
class PassDB extends javax.swing.JFrame implements ActionListener {
static boolean getOut = false;
JTextField uname = new JTextField(10);
JTextField pword = new JTextField(10);
// JPasswordField pword = new JTextField(10);
public PassDB() {
super("duBe's database logon");
setSize(220, 160);
setDefaultCloseOperation(EXIT_ON_CLOSE);
JPanel pane = new JPanel();
JLabel unameLabel = new JLabel ("Username: ");
JLabel pwordLabel = new JLabel ("Password: ");
JButton submit = new JButton("OK");
submit.addActionListener(this);
pane.add(unameLabel);
pane.add(uname);
pane.add(pwordLabel);
pane.add(pword);
pane.add(submit);
setContentPane(pane);
while(getOut == false)
setVisible(true);
public void actionPerformed(ActionEvent evt) {
PassDB clicked = (PassDB)evt.getSource();
DBQuery.username = uname.getText();
DBQuery.password = pword.getText();
getOut = true;
} Any advice is greatly appreciated
duBe
Maybe you are looking for
-
Sccm console on windows 8.1 - window display issue
I'm currently using a surface pro 2 with win 8.1 enterprise (sccm is 2012 r2). Overall the surface is a great piece of hardware. One problem that I'm having is that the sccm console doesn't properly display wizard windows properly. They are cut of
-
I'm trying to test drive the new assertion facility in J2SE 1.4 but can't get even a simple example to work: public class Foo public void m1( int value ) assert 0 <= value; System.out.println( "OK" ); public static void
-
Error using OSR10g with SOA Suite 11g
Hi, I'm trying to configure a web service adapter in Jdev 11.1.1.2 in order to use the OSR (10g) to dinamically resolve the WSDL location and SOAP endpoint, but I always get an error like this: Exception: WSDLException: faultCode=PARSER_ERROR: Failed
-
HT1222 What is this 4 digit pass code I need to update my iPhone software?
What is the 4 did hit pass code I now need to update my iPhone software?
-
I can't make panorama works, yes from settings, yes from my panorama folder
I don't know what is the problems