Error using OSR10g with SOA Suite 11g

Hi,
I'm trying to configure a web service adapter in Jdev 11.1.1.2 in order to use the OSR (10g) to dinamically resolve the WSDL location and SOAP endpoint, but I always get an error like this:
Exception: WSDLException: faultCode=PARSER_ERROR: Failed to read wsdl file at: "orauddi:/uddi:8955c1d0-0b55-11e1-b90e-7b4aa540b908", caused by: oracle.fabric.common.uddiurl.resolver.exception.SRKeyNotFoundException:
<dispositionReport xmlns="urn:uddi-org:api_v3">
    <result errno="10210">
        <errInfo errCode="E_invalidKeyPassed">Cannot find BusinessService with key orauddi:/uddi:8955c1d0-0b55-11e1-b90e-7b4aa540b908 !</errInfo>
    </result>
</dispositionReport>The service is correctly published in registry, even its reachable from the UDDI Registry Resource Palette in JDEV.
The same service published in a OSR 11g is invoked correctly, but I can't solve the proble for the OSR 10g.
I found some documentation about migrating and it says that the SOA Suite 10g uses UDDI standar but the 11g Suite uses orauddi.... so, not standard??, is there a way to integrate SOA Suite 11g with OSR 10g??

Hi,
check for some spaces or character which might be going while you specify the JRE locations, alternatively you can call runInstaller with
-jreLoc ,i.e;have the path in the cmd.
./runInstaller -jreLoc /root/Oracle/Middleware/jdk160_14_R27.6.5-32
which should work.
regards,
Jitendra

Similar Messages

  • Error While Installation of SOA SUITE 11g

    Hi
    I am installing SOA SUITE 11g on Oracle Linux 4.
    I have already installed Oracle database 11g
    I have installed Weblogic server 10.3.x
    I have checked oracle database , i am able to run it successfully.
    I have checked weblogic server too, its too running successfully.
    I have logged into server as *"oracle" user* and trying to run runInstaller from command prompt
    the trace for error getting generated is below. plz let me know where i am making mistake.
    I am new to SOA SUITE n related technologies..
    ++[oracle@localhost ~]$ cd SOA_SUITE/Disk1++
    ++[oracle@localhost Disk1]$ ls++
    ++doc install runInstaller setup.exe stage++
    ++[oracle@localhost Disk1]$ ./runInstaller++
    ++Starting Oracle Universal Installer...++
    ++Checking if CPU speed is above 300 MHz. Actual 1992 MHz Passed++
    ++Checking Temp space: must be greater than 150 MB. Actual 233511 MB Passed++
    ++Checking swap space: must be greater than 500 MB. Actual 5023 MB Passed++
    ++Checking monitor: must be configured to display at least 256 colors++
    ++>>> Could not execute auto check for display colors using command /usr/X11R6/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<++
    ++Some requirement checks failed. You must fulfill these requirements before++
    ++continuing with the installation,++
    ++Continue? (y/n) [n] y++
    ++>>> Ignoring required pre-requisite failures. Continuing...++
    ++Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-02-23_05-49-23PM. Please wait ...++
    ++Please specify JRE/JDK location ( Ex. /home/jre ), <location>/bin/java should exist :++
    ++Please specify a valid JRE/JDK location :/root/Oracle/Middleware/jdk160_14_R27.6.5-32++
    ++Please specify a valid JRE/JDK location :++
    I am trying to give JRE/JDK location which i got when i was installing weblogic server but its not accepting that and i am getting
    "Please specify a valid JRE/JDK location : " message again.
    Please let me know how i can i get out of this error.
    Thanks
    vishnu kumar

    Hi,
    check for some spaces or character which might be going while you specify the JRE locations, alternatively you can call runInstaller with
    -jreLoc ,i.e;have the path in the cmd.
    ./runInstaller -jreLoc /root/Oracle/Middleware/jdk160_14_R27.6.5-32
    which should work.
    regards,
    Jitendra

  • Integrating SaaS CRM (cloud) with SOA suite 11g

    Hi All, 
    I have a one requirement, need to read a file shared by SaaS CRM of Oracle Fusion applications which are hosted on Cloud from SOA suite 11g. Any pointers or blogs references please.
    Thanks!

    Hi,
    I found this document from the Oracle Open World 2009 (maybe you have found it too) :
    "Integration with PeopleSoft applications using oracle soa suite 11g BPEL" --> [http://www.oracle.com/technology/tech/fmw4apps/peoplesoft/pdf/oow2009-bpel-psft.pdf]
    And this could be a little more simple, but have a good step-by-step tutorial.
    [http://www.oracle.com/technology/obe/fusion_middleware/fusion/soa/BPEL_PS848/OBE_PSFT_BPEL_848.htm]
    I think you must read this docs by now, but never come amiss.
    Hope this can help you,
    By the way, if you can help me with this I'll appreciate it a lot.
    Unable to access the following endpoint(s)

  • Schematron validation error in BPEL, Oracle Soa Suite 11g

    Hi Friends,
    As per the requirement, I have to validate all the mandatory element values from an XML payload and need to send the consolidated report to the source application with all the validation failure elements.
    I am trying to implement Schematron validation in BPEL, but its giving me the following error:
    +<remoteFault>+
    +<part name="summary">+
    +<summary>oracle.fabric.common.FabricException: Cannot get Object part 'result'. No parts are set on the message</summary>+
    +</part>+
    +<part name="detail">+
    +<detail>Cannot get Object part 'result'. No parts are set on the message</detail>+
    +</part>+
    +</remoteFault>+
    I have followed the below process and created very basic sample composite.
    1) Extracted the validate.wsdl from bpm-services.jar.
    2) Imported the validate.wsdl into my Jdev Project.
    3) Created partenr link based on the validation.wsdl and used Invoke activty to invoke the partner link.
    4) Created .sch file and passed to input variable of the invoke activity.
    If any one knows about this issue, plz help me. Or if any one has developed an example on how to use schematron in BPEL plz share it with me.
    Thanks
    Ramesh

    1) How often did u see SOA suite being used in Non-Oracle Apps projects i.e projects that do not use Oracle Applications as the source data provider.Frankly speaking, not very often but still there are many customers who are using/willing to migrate on Oracle SOA Suite because of the many advantages provided by 11g stack.
    2) How much Oracle Apps knowledge is required for choosing the career of Oracle SOA Suite Integration Architect? I would say that both the technologies have very less in common so it never depends on your level of Apps knowledge to architect a SOA solution. You have to learn SOA from scratch but if you have prior experience in Oracle Apps then it may not be very difficult for you to go ahead with SOA.
    Regards,
    Anuj

  • Error deploying composite on SOA Suite 11g: premature EOF encountered

    I am getting the following error when trying to deploy a SOA composite from Jdev 11.1.1.2.0 (on XP) to SOA suite 11.1.1.2.0 (on linux):
    [10:36:43 AM] Error sending deployment request to server soa_server1 [xxx.xxx.x.xx:8001]
    java.io.EOFException: Premature EOF encountered
    More information:
    [10:35:34 AM] >>>> Warning: Unable to determine the target platform from the Profile. Using default...
    [10:35:34 AM] ---- Deployment started. ----
    [10:35:34 AM] Target platform is (Weblogic 10.3).
    [10:35:34 AM] Running dependency analysis...
    [10:35:34 AM] Building...
    [10:35:43 AM] Deploying profile...
    [10:35:43 AM] Updating revision id for the SOA Project 'validationForCC.jpr' to '1.0'..
    [10:35:43 AM] Wrote Archive Module to D:\po\CreditCardValidation\validationForCC\deploy\sca_validationForCC_rev1.0.jar
    [10:35:43 AM] Deploying sca_validationForCC_rev1.0.jar to soa_server1 [xxx.xxx.x.xx:8001]
    [10:35:43 AM] Processing sar=/D:/po/CreditCardValidation/validationForCC/deploy/sca_validationForCC_rev1.0.jar
    [10:35:43 AM] Adding sar file - D:\po\CreditCardValidation\validationForCC\deploy\sca_validationForCC_rev1.0.jar
    [10:35:43 AM] Preparing to send HTTP request for deployment
    [10:35:43 AM] Creating HTTP connection to host:xxx.xxx.x.xx, port:8001
    [10:35:43 AM] Sending internal deployment descriptor
    [10:35:43 AM] Sending archive - sca_validationForCC_rev1.0.jar
    [10:36:43 AM] Error sending deployment request to server soa_server1 [xxx.xxx.x.xx:8001]
    java.io.EOFException: Premature EOF encountered
    [10:36:43 AM] Error sending deployment request to server soa_server1 [xxx.xxx.x.xx:8001]
    java.io.EOFException: Premature EOF encountered
    [10:36:43 AM] #### Deployment incomplete. ####
    [10:36:43 AM] Error deploying archive file:/D:/po/CreditCardValidation/validationForCC/deploy/sca_validationForCC_rev1.0.jar
    (oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
    Who can help me solve this problem? The error always comes after exactly 1 minute.
    _[10:35:43 AM]_ Sending archive - sca_validationForCC_rev1.0.jar
    _[10:36:43 AM]_ Error sending deployment request to server soa_server1 [xxx.xxx.x.xx:8001]

    Problem is solved.
    The problem was caused by configuration of my computer.
    JDeveloper deployment needed to contact my application server by ip-adress and by alias.
    I could only ping to my application server by ip-adress.

  • SOA Suite 11g OWSM (no Gateway)

    Hi
    I am currently looking at a new high level design for a SOA implementation using the Oracle SOA Suite 11g.
    We have a small issue around how to secure our externally facing web services that are exposed out to the WWW.
    Previously I would have placed an instance of the OWSM gateway in the DMZ secure tier of our infrastructure seperating this from our Application/ SOA tier with firewalls.
    However in the 11g version of the SOA suite there is no Gateway component which means that although we can still use policy enforcement points to secure the services in the SOA tier we have to let messages into the SOA / Business Tier before we can perform this validation.
    We are looking at 3 stage validation of incoming XMl validation
    - Encryption / Signing SOAP Messages using digital certificates
    - Integrity check of the XML structure
    - Username and password authentication
    Ideally we would like to perform this validation within the DMZ before passing the messages to the SOA / Business Tier but cannot see how to perform these actions within the OWSM. Does anyone have any ideas of how we can perform these actions using the 11g Suite.

    Eric
    As I put in my previous post we know there is no gateway which is why I am posting a thred on this forum.
    Securing the services at the level you have provided should only be done for internal security vilations and this is not recommended for services exposed out to the WWW.
    Securing services in the AS business tier does not prevent denial of service attacks because the services them selves will be taken down. The OWSM provided the ability to secure the services in the DMZ.
    What I need to know is how Oracle or other people are securing their services INSTEAD of using the Gateway.

  • Does SOA Suite 11g include OSB?

    What's the difference between OSB and ESB.
    ESB is a component of SOA Suite and it can connect to different services.
    OSB has more functions such as dynamic routing and Message Enrichment. If I just buy SOA suite, can I use OSB? Or I must buy OSB if I want to use it in my application which contains SOA components.

    I think with SOA suite 11g license, you may use OSB. No need to purchase it seprately. You may refer -
    Difference between Esb and aqualogic service bus
    What are the differences between ESB 10g and OSB 10g
    SOA suite and OSB differences
    Regards,
    Anuj

  • Is it possible to use SOA Suite 11g with JDeveloper's integrated WebLogic?

    Is it possible to use SOA Suite 11g with JDeveloper's integrated WebLogic? Or do you have to install an external WebLogic?
    Thanks for help.
    Edited by: user7722720 on 07-Dec-2011 02:04

    Hi
    By default, NO it is NOT possible to deploy any SOA Applications on Integrated Weblogic Server that comes with JDeveloper. This integrated weblogic server is very light weight basic weblogic server with single domain (only 1 AdminServer) to deploy a standard J2EE, ADF Applications like EJBs, WebApps, WebServices, ADF Apps etc. BUT SOA (having BPEL, BPMs etc ) cannot be deployed.
    There is an option to upgrade this integrated weblogic server and install SOA on top of this. Like download soa installer that matches with your JDeveloper version and install soa on top of this weblogic. BUT I strongly do not recommend this, because you will not be able to upgrade iin future to the latest versions.
    Yes, its always better to install the standalone Weblogic Server that matches with your JDeveloper version. Then install SOA on top of this Weblogic Server. Then create RCU Schemas in any Oracle Database. Run config wizard and create a SOA Domain. Now integrate this in your JDeveloper to deploy any soa applications.
    Make sure that JDeveloper, Weblogic Server, SOA Software, RCU all these versions should match and they should be same.
    Thanks
    Ravi Jegga

  • Integration with PeopleSoft Applications Using Oracle SOA Suite 11g BPEL

    Hi,
    I'm integrating BPEL with Peoplesoft FSCM 9.0 Application on tools 8.49 using Oracle SOA Suite 11g. The BPEL invokes the web service method generated from Peoplesoft Component Interface in a synchronuos manner.
    I have deployed the BPEL in Oracle SOA Suite 11g using Jdeveloper successfully but I have problem in configuring the BPEL node in Peoplesoft side using Oracle SOA Suite 11g(FMW) . I had done the integration of BPEL with Peoplesoft FSCM 9.0 on tools 8.49 using Oracle SOA Suite 10g earlier successfully by configuring BPEL node properties as follows:
    BPEL CONSOLE : http://Host Name:8888/BPELConsole (System with Oracle SOA Suite 10g server for deployment)
    BPEL DOMAIN : default
    Using this BPEL node configuration, I was able to ping the BPEL console of Oracle SOA Suite 10g from peoplesoft and hence complete the integration successfully.
    Now in order to acomplish Business rules and other functionality, the BPEL application has been developed in Oracle SOA Suite 11g using Jdeveloper 11g. This time I'm not able to configure the BPEL node in Peoplesoft for this integration as I'm assuming there is no separate BPEL console in Oracle SOA Suite 11g. All the BPEL deployments are administered in console (11g console used for deployment of BEPL)
    http://Host Name:7001/em (System with Oracle SOA Suite 11g server - Fusion Middleware).
    So when I Configured the BPEL node property in Peoplesoft as :
    BPEL CONSOLE : http://Host Name:7001/em (System with Oracle SOA Suite 11g server for deployment)
    BPEL DOMAIN : default
    I'm not able to ping the Peoplesoft BPEL node to the Oracle SOA Suite 11g. Hence I'm not able to proceed with my integration.
    When I searched the OTN discussion forum on BPEL console for Oracle SOA Suite 11g, all threads point that there is no separate BPEL console unlike Oracle SOA Suite 10g. Also most of the articles for Integration with Peoplesoft Application using SOA 11g do not state any specific configuration setting for property of Peoplesoft BPEL node in order to integrate with BPEL 11g. The examples published in OTN still point towards screen shots of integration using SOA Suite 10g.
    So I'm not able to proceed in this regard.
    Any help in this regard is highly appreciated.
    Thanks in Advance,
    Girish
    Edited by: user11214154 on Nov 23, 2009 8:12 PM
    typo error

    Hi,
    I found this document from the Oracle Open World 2009 (maybe you have found it too) :
    "Integration with PeopleSoft applications using oracle soa suite 11g BPEL" --> [http://www.oracle.com/technology/tech/fmw4apps/peoplesoft/pdf/oow2009-bpel-psft.pdf]
    And this could be a little more simple, but have a good step-by-step tutorial.
    [http://www.oracle.com/technology/obe/fusion_middleware/fusion/soa/BPEL_PS848/OBE_PSFT_BPEL_848.htm]
    I think you must read this docs by now, but never come amiss.
    Hope this can help you,
    By the way, if you can help me with this I'll appreciate it a lot.
    Unable to access the following endpoint(s)

  • How to deal with any UDDI in SOA Suite 11g?

    Hi folks,
    I have spent quite some time trying to understand how Oracle is dealing with the UDDI aspects in the Soa Suite 11g.
    Back to Oracle AS 10g, I remember, even though i had never used it, that the UDDI repository was a out of the box capability with a very nice Web UI to browse the services The Aqualogic Service Bus seems to have features to consume/publish web services in any UDDI, but no real embedded UDDI in its core.
    Since 11g, obviously the way to go is to adopt Oracle Service Registry. There is a seamless integration with JDeveloper 11g (i.e create a UDDI connection to publish/consume/search web services).
    My company is keen to go on a open source UDDI and I came to the conclusion that any of those (i.e jUDDIv3.02, OpenUDDI) are actually able to work properly with JDeveloper 11.1.1.2. I got XSD exception or other cabalistic errors that definitely show that JDeveloper 11g can only deal with Oracle Service Registry. I heard that the Soa Suite 11g could only deal with UDDI v2 and v3. CentraSite does fit those requirements but does not work too.
    Why is that ? How can I set up my SOA initiative without having the choice on the UDDI ? Does this have changed since PS2 ? I have tried to look up on Metalink and I got a hit on jUDDI but it does clearly state that jUDDI works well now with JDeveloper.
    Any answer on that would be highly appreciated.
    Kind regards,

    Hi,
    DVM cache policy is lazy load. there is no option to preload the cache with server startup currently. However this would be affecting only the first request the susequent requests are serviced from cache.
    HTH..
    appologies for reaching on this late.
    regards,
    Jitendra

  • Problem with DB JCA adapter in Soa suite 11g composite appl

    i am testing a simple credit card validation composite with Oracle SOA suite 11g11.1.1.4.0, Jdevloper 11.1.1.3.0 and oracle universal XE DB. I am having an exception given below. I have checked that data source is properly configured and appearing at the right place in JNDI tree. Suggestion like 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/DBconnection. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR) has also been tried result is same
    **Any suggestion will greatly appreciated .**
    java.lang.Exception: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'CreditCardDBServiceSelect' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. CreditCardValidation:CreditCardDBService [ CreditCardDBService_ptt::CreditCardDBServiceSelect(CreditCardDBServiceSelect_inputParameters,CreditcardsCollection) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/DBconnection'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/DBconnection. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server Please make sure that the JCA connection factory and any dependent connection factories have been configured with a sufficient limit for max connections. Please also make sure that the physical connection to the backend EIS is available and the backend itself is accepting connections. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:575) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:381) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:298) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.sun.el.parser.AstValue.invoke(Unknown Source) at com.sun.el.MethodExpressionImpl.invoke(Unknown Source) at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53) at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1256) at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:102) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:96) at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475) at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:765) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:305) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:185) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:101) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446) at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177) at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:175) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:179) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.core.model.targetauth.EMLangPrefFilter.doFilter(EMLangPrefFilter.java:158) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111) at java.security.AccessController.doPrivileged(Native Method) at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313) at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413) at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94) at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161) at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207) at weblogic.work.ExecuteThread.run(ExecuteThread.java:176) Caused by: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'CreditCardDBServiceSelect' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. CreditCardValidation:CreditCardDBService [ CreditCardDBService_ptt::CreditCardDBServiceSelect(CreditCardDBServiceSelect_inputParameters,CreditcardsCollection) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/DBconnection'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/DBconnection. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server Please make sure that the JCA connection factory and any dependent connection factories have been configured with a sufficient limit for max connections. Please also make sure that the physical connection to the backend EIS is available and the backend itself is accepting connections. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:260) at oracle.sysman.emSDK.webservices.wsdlparser.OperationInfoImpl.invokeWithDispatch(OperationInfoImpl.java:992) at oracle.sysman.emas.model.wsmgt.PortName.invokeOperation(PortName.java:729) at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:569) ... 79 more Caused by: javax.xml.ws.soap.SOAPFaultException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'CreditCardDBServiceSelect' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. CreditCardValidation:CreditCardDBService [ CreditCardDBService_ptt::CreditCardDBServiceSelect(CreditCardDBServiceSelect_inputParameters,CreditcardsCollection) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/DBconnection'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/DBconnection. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server Please make sure that the JCA connection factory and any dependent connection factories have been configured with a sufficient limit for max connections. Please also make sure that the physical connection to the backend EIS is available and the backend itself is accepting connections. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.j2ee.ws.client.jaxws.DispatchImpl.throwJAXWSSoapFaultException(DispatchImpl.java:1012) at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:803) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.synchronousInvocationWithRetry(OracleDispatchImpl.java:235) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.invoke(OracleDispatchImpl.java:106) at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:256) ... 82 more

    Hi,
    The JNDI Name to use for the service connection is "eis/DB/soademoDatabase".
    This Database is a requirement of the course... (Chapter 4 of Getting Started with Oracle SOA Suite 11g R1 - A Hands-On Tutorial).

  • Error invoking Oracle Application Adapter part of SOA Suite 11g

    We are using Oracle application adapter from BPEL process manager ( SOA Suite 11g) to call PLSQL:OE_ORDER_PUB:PROCESS_ORDER (EBS R12).
    The call returns error : "<ns0:X_MSG_DATA
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:nil="">FND
    FND_AS_UNEXPECTED_ERROR N PKG_NAME OE_Order_PVT N PROCEDURE_NAME Lines N
    ERROR_TEXT ORA-06502: PL/SQL: numeric or value error: NULL index table key
    value </ns0:X_MSG_DATA>"
    The same order gets created from PLSQL but fails while trying from BPEL through Oracle APPS adapter. The dbg file at the EBS end is given below:
    Session Id:5695950
    Entering OE_HEADER_UTIL.GET_IDS
    Exiting OE_HEADER_UTIL.GET_IDS
    Entering OE_HEADER_UTIL.GET_IDS
    Exiting OE_HEADER_UTIL.GET_IDS
    ENTER SET RECURSION MODE
    ENTITY CODE-1
    ENTRY-EXIT MODE -1
    RECURSION MODE AT ENTRY -N
    RECURSION MODE WITHOUT EXP AT ENTRY -N
    RECURSION MODE AT EXIT -N
    RECURSION MODE WITHOUT EXP AT EXIT -N
    ENTERING OE_ORDER_PUB.PROCESS_ORDER
    LEAVING OE_MSG_PUB.INITIALIZE
    ENTER PROCESS_ORDER_AG
    BEFORE HEADER PROCESSING
    HEADER_ID22020
    OPERATIONCREATE
    ENTER SET RECURSION MODE
    ENTITY CODE-2
    ENTRY-EXIT MODE -1
    RECURSION MODE AT ENTRY -N
    RECURSION MODE WITHOUT EXP AT ENTRY -N
    RECURSION MODE AT EXIT -N
    RECURSION MODE WITHOUT EXP AT EXIT -N
    ENTERING OE_ORDER_PVT.HEADER
    OE_ORDER_PVT.HEADER AFTER INIT CONTROL REC
    OPERATION = CREATE SO SET OLD TO NULL
    Entering OE_HEADER_UTIL.CONVERT_MISS_TO_NULL
    Exiting OE_HEADER_UTIL.CONVERT_MISS_TO_NULL
    ENTER OE_HEADER_SECURITY.ATTRIBUTES
    VALIDATE ATTRIBUTES
    Entering OE_VALIDATE_HEADER.ATTRIBUTES
    Entering OE_ORDER_CACHE.LOAD_INVOICE_TO_ORG
    Exiting OE_ORDER_CACHE.LOAD_INVOICE_TO_ORG
    Entering OE_ORDER_CACHE.LOAD_ORDER_TYPE
    Exiting OE_ORDER_CACHE.LOAD_ORDER_TYPE
    Entering OE_ORDER_CACHE.LOAD_Payment_Term
    Exiting OE_ORDER_CACHE.LOAD_Payment_Term
    Entering OE_ORDER_CACHE.LOAD_PRICE_LIST
    Exiting OE_ORDER_CACHE.LOAD_PRICE_LIST
    Entering OE_ORDER_CACHE.LOAD_Salesrep_rec
    Exiting OE_ORDER_CACHE.LOAD_Salesrep
    Exiting OE_VALIDATE_HEADER.ATTRIBUTES
    DEFAULT MISSING
    ENTERING OE_SYS_PARAMETERS.VALUE
    Going to get the value for INSTALLMENT_OPTIONS
    ENTERING OE_SYS_PARAMETERS_PVT.VALUE
    Parameter value fetched from table.
    PARAMETER VALUE:
    In OE_Contracts_util.check_license
    performing check first time, lx_status: I
    l_sales_contracts_enabled: N
    SET CODE
    AFTER SET CODE
    Enter get_freight_carrier()
    Entering OE_ORDER_CACHE.LOAD_SET_OF_BOOKS
    ENTERING OE_SYS_PARAMETERS.VALUE
    Going to get the value for SET_OF_BOOKS_ID
    ENTERING OE_SYS_PARAMETERS_PVT.VALUE
    ENTERING OE_SYS_PARAMETERS_PVT.GET_AR_SYS_PARAMS ...
    Querying the table for the AR details ..
    Exiting OE_ORDER_CACHE.LOAD_SET_OF_BOOKS
    AFTER DEFAULT MISSING
    APPLY ATTRIBUTE CHANGES
    Entering OE_HEADER_UTIL.APPLY_ATTRIBUTE_CHANGES
    Raj1
    Raj2
    Raj3
    Raj4
    before getting payment count
    Exiting OE_HEADER_UTIL.APPLY_ATTRIBUTE_CHANGES
    ENTER OE_HEADER_SECURITY.ENTITY
    ENTERING OE_SYS_PARAMETERS.VALUE
    Going to get the value for AUDIT_TRAIL_ENABLE_FLAG
    ENTERING OE_SYS_PARAMETERS_PVT.VALUE
    VALUE FROM DBE
    Parameter value fetched from table.
    PARAMETER VALUE: E
    ENTER OE_PC_CONSTRAINTS_ADMIN_PVT.IS_OP_CONSTRAINED , COLUMN:
    EXIT OE_PC_CONSTRAINTS_ADMIN_PVT.IS_OP_CONSTRAINED , RESULT:0
    EXIT OE_HEADER_SECURITY.ENTITY
    Entering OR_HEADER_UTIL.Pre_Write_Process
    No prepayments for the order
    Entering OE_HEADER_UTIL.Get_Order_Number
    Entering OE_HEADER_UTIL.Get_Order_Number
    Ordertype is :1087
    Entering OE_ORDER_CACHE.LOAD_SET_OF_BOOKS
    ENTERING OE_SYS_PARAMETERS.VALUE
    Going to get the value for SET_OF_BOOKS_ID
    ENTERING OE_SYS_PARAMETERS_PVT.VALUE
    ENTERING OE_SYS_PARAMETERS_PVT.GET_AR_SYS_PARAMS ...
    Getting the AR details from the cache ..
    Exiting OE_ORDER_CACHE.LOAD_SET_OF_BOOKS
    Entering OE_ORDER_CACHE.LOAD_ORDER_TYPE
    Exiting OE_ORDER_CACHE.LOAD_ORDER_TYPE
    before calling get_seq_info
    Category Code1087
    Set of Books2021
    after calling get_seq_info
    fndseqresult0
    fndseqtype1017
    p_old_header_rec.order_number:
    p_old_header_rec.transaction_phase_code:
    Exiting OR_HEADER_UTIL.Get_Order_Number
    Exiting OR_HEADER_UTIL.Pre_Write_Process
    WRITE TO DB
    Entering OE_HEADER_UTIL.INSERT_ROW
    ENTERING OE_ORDER_UTIL.UPDATE_GLOBAL_PICTURE
    UI FLAG IS FALSE
    CODE_RELEASE_LEVEL=120004
    Entering OE_ORDER_CACHE.LOAD_ORDER_HEADER
    Exiting OE_ORDER_CACHE.LOAD_ORDER_HEADER
    P_HEADER_ID=22020
    P_HEADER_REC.HEADER_ID=22020
    OD GLOBAL HEADER_ID= 22020
    NEW GLOBAL HEADER_ID= 22020
    EXITING OE_ORDER_UTIL.UPDATE_GLOBAL_PICTURE
    returned index is: 1
    Exiting OE_HEADER_UTIL.INSERT_ROW
    Entering OE_HEADER_UTIL.Post_Write_Process
    ENTER SET RECURSION MODE
    ENTITY CODE-11
    ENTRY-EXIT MODE -1
    RECURSION MODE AT ENTRY -N
    RECURSION MODE WITHOUT EXP AT ENTRY -N
    RECURSION MODE AT EXIT -N
    RECURSION MODE WITHOUT EXP AT EXIT -N
    Entering Procedure Process_Request_Pvt
    Request type DFLT_HSCREDIT_FOR_SREP
    Entering OE_DELAYED_REQUESTS_UTIL.DFLT_HSCREDIT_PRIMARY_SREP
    ENTERING OE_HEADER_SCREDIT_UTIL.DFLT_HSCREDIT_PRIMARY_SREP
    ENTER SET RECURSION MODE
    ENTITY CODE-4
    ENTRY-EXIT MODE -1
    RECURSION MODE AT ENTRY -N
    RECURSION MODE WITHOUT EXP AT ENTRY -N
    RECURSION MODE AT EXIT -N
    RECURSION MODE WITHOUT EXP AT EXIT -N
    ENTERING OE_ORDER_PVT.HEADER_SCREDITS
    ENTER OE_HEADER_SCREDIT_SECURITY.ATTRIBUTES
    Entering OE_VALIDATE_Header_Scredits.Attributes
    Entering OE_ORDER_CACHE.LOAD_Salesrep_rec
    Exiting OE_ORDER_CACHE.LOAD_Salesrep
    Exiting OE_VALIDATE_Header_Scredits.Attributes
    Entering OE_VALIDATE_Header_Scredits.Entity
    Entering OE_VALIDATE_Header_Scredits.Duplicate_salescredit
    Exiting OE_VALIDATE_Header_Scredits.Duplicate_salescredit
    Exiting OE_VALIDATE_Header_Scredits.Entity
    ENTER OE_HEADER_SCREDIT_SECURITY.ENTITY
    ENTERING OE_SYS_PARAMETERS.VALUE
    Going to get the value for AUDIT_TRAIL_ENABLE_FLAG
    ENTERING OE_SYS_PARAMETERS_PVT.VALUE
    Parameter value exists.
    PARAMETER VALUE: E
    Entering OE_ORDER_CACHE.LOAD_ORDER_HEADER
    Exiting OE_ORDER_CACHE.LOAD_ORDER_HEADER
    ENTER OE_PC_CONSTRAINTS_ADMIN_PVT.IS_OP_CONSTRAINED , COLUMN:
    EXIT OE_PC_CONSTRAINTS_ADMIN_PVT.IS_OP_CONSTRAINED , RESULT:0
    EXIT OE_HEADER_SCREDIT_SECURITY.ENTITY
    ENTERING OE_HEADER_SCREDIT_UTIL.INSERT_ROW
    ENTERING OE_ORDER_UTIL.UPDATE_GLOBAL_PICTURE
    UI FLAG IS FALSE
    CODE_RELEASE_LEVEL=120004
    P_HDR_SCR_ID=64168
    ENTERING OE_ORDER_UTIL.RETURN_GLB_ENT_INDEX
    EXITING OE_ORDER_UTIL.RETURN_GLB_ENT_INDEX
    INDEX=641680001
    L_RETURN_STATUS =S
    L_RESULT =F
    OLD SCR_ID 64168
    NEW SCR_ID64168
    EXITING OE_ORDER_UTIL.UPDATE_GLOBAL_PICTURE
    RETURNED INDEX IS: 641680001
    EXITING OE_HEADER_SCREDIT_UTIL.INSERT_ROW
    EXITING OE_ORDER_PVT.HEADER_SCREDITS
    ENTER SET RECURSION MODE
    ENTITY CODE-4
    ENTRY-EXIT MODE -0
    RECURSION MODE AT ENTRY -N
    RECURSION MODE WITHOUT EXP AT ENTRY -N
    RECURSION MODE AT EXIT -N
    RECURSION MODE WITHOUT EXP AT EXIT -N
    EXITING OE_HEADER_SCREDIT_UTIL.DFLT_HSCREDIT_PRIMARY_SREP
    Exiting OE_DELAYED_REQUESTS_UTIL.DFLT_HSCREDIT_PRIMARY_SREP
    leaving Process_Request_Pvt
    ENTER SET RECURSION MODE
    ENTITY CODE-11
    ENTRY-EXIT MODE -0
    RECURSION MODE AT ENTRY -N
    RECURSION MODE WITHOUT EXP AT ENTRY -N
    RECURSION MODE AT EXIT -N
    RECURSION MODE WITHOUT EXP AT EXIT -N
    leaving process_requenst_for_reqtype
    Before calling eval_post_write_header in HEADER Post Write
    ENTERING EVAL_POST_WRITE_HEADER
    M_HOLD_ENTITY_CODE/M_HOLD_ENTITY_ID:C/13489
    RETRIEVING NEW HOLD SOURCE RECORD
    HOLD SOURCE RECORD NOT FOUND , EXITING
    EXITING EVAL_POST_WRITE_HEADER
    After calling eval_post_write_header in HEADER Post Write
    Before calling OE_SCHEDULE_UTIL
    ENTERING INSERT_INTO_MTL_SALES_ORDERS
    CALLING INVS CREATE_SALESORDER
    ORDER TYPE: Cochin Order
    SOURCE CODE: ORDER ENTRY
    ORDER NUMBER : 1017
    L_MSG_COUNT
    RETURN STATUS S
    EXITING INSERT_INTO_MTL_SALES_ORDERS
    Entering OE_ORDER_CACHE.LOAD_ORDER_HEADER
    Exiting OE_ORDER_CACHE.LOAD_ORDER_HEADER
    Exiting OE_HEADER_UTIL.Post_Write_Process
    EXITING OE_ORDER_PVT.HEADER
    ENTER SET RECURSION MODE
    ENTITY CODE-2
    ENTRY-EXIT MODE -0
    RECURSION MODE AT ENTRY -N
    RECURSION MODE WITHOUT EXP AT ENTRY -N
    RECURSION MODE AT EXIT -N
    RECURSION MODE WITHOUT EXP AT EXIT -N
    AFTER HEADER PROCESSING HEADER_ID = 22020
    AFTER HEADER_ADJS PROCESSING
    ENTER SET RECURSION MODE
    ENTITY CODE-9
    ENTRY-EXIT MODE -1
    RECURSION MODE AT ENTRY -N
    RECURSION MODE WITHOUT EXP AT ENTRY -N
    RECURSION MODE AT EXIT -N
    RECURSION MODE WITHOUT EXP AT EXIT -N
    Enter OE_Delayed_Requests_Pvt.Process_Request_for_Entity
    ENTER SET RECURSION MODE
    ENTITY CODE-9
    ENTRY-EXIT MODE -0
    RECURSION MODE AT ENTRY -N
    RECURSION MODE WITHOUT EXP AT ENTRY -N
    RECURSION MODE AT EXIT -N
    RECURSION MODE WITHOUT EXP AT EXIT -N
    AFTER HEADER_PRICE_ATTS PROCESSING
    ENTER SET RECURSION MODE
    ENTITY CODE-9
    ENTRY-EXIT MODE -1
    RECURSION MODE AT ENTRY -N
    RECURSION MODE WITHOUT EXP AT ENTRY -N
    RECURSION MODE AT EXIT -N
    RECURSION MODE WITHOUT EXP AT EXIT -N
    Enter OE_Delayed_Requests_Pvt.Process_Request_for_Entity
    ENTER SET RECURSION MODE
    ENTITY CODE-9
    ENTRY-EXIT MODE -0
    RECURSION MODE AT ENTRY -N
    RECURSION MODE WITHOUT EXP AT ENTRY -N
    RECURSION MODE AT EXIT -N
    RECURSION MODE WITHOUT EXP AT EXIT -N
    ENTER SET RECURSION MODE
    ENTITY CODE-9
    ENTRY-EXIT MODE -1
    RECURSION MODE AT ENTRY -N
    RECURSION MODE WITHOUT EXP AT ENTRY -N
    RECURSION MODE AT EXIT -N
    RECURSION MODE WITHOUT EXP AT EXIT -N
    Enter OE_Delayed_Requests_Pvt.Process_Request_for_Entity
    Entering Procedure Process_Request_Pvt
    Request type CHECK_HSC_QUOTA_TOTAL
    Entering OE_DELAYED_REQUESTS_UTIL.VALIDATE_HSC_QUOTA_TOTAL
    Entering OE_VALIDATE_Header_Scredits.Validate_HSC_QUOTA_TOTAL
    Exiting OE_VALIDATE_Header_Scredits.Validate_HSC_QUOTA_TOTAL
    Exiting OE_DELAYED_REQUESTS_UTIL.VALIDATE_HSC_QUOTA_TOTAL
    leaving Process_Request_Pvt
    ENTER SET RECURSION MODE
    ENTITY CODE-9
    ENTRY-EXIT MODE -0
    RECURSION MODE AT ENTRY -N
    RECURSION MODE WITHOUT EXP AT ENTRY -N
    RECURSION MODE AT EXIT -N
    RECURSION MODE WITHOUT EXP AT EXIT -N
    ENTER SET RECURSION MODE
    ENTITY CODE-9
    ENTRY-EXIT MODE -1
    RECURSION MODE AT ENTRY -N
    RECURSION MODE WITHOUT EXP AT ENTRY -N
    RECURSION MODE AT EXIT -N
    RECURSION MODE WITHOUT EXP AT EXIT -N
    Enter OE_Delayed_Requests_Pvt.Process_Request_for_Entity
    ENTER SET RECURSION MODE
    ENTITY CODE-9
    ENTRY-EXIT MODE -0
    RECURSION MODE AT ENTRY -N
    RECURSION MODE WITHOUT EXP AT ENTRY -N
    RECURSION MODE AT EXIT -N
    RECURSION MODE WITHOUT EXP AT EXIT -N
    BEFORE LINES PROCESSING
    ENTER SET RECURSION MODE
    ENTITY CODE-5
    ENTRY-EXIT MODE -1
    RECURSION MODE AT ENTRY -N
    RECURSION MODE WITHOUT EXP AT ENTRY -N
    RECURSION MODE AT EXIT -N
    RECURSION MODE WITHOUT EXP AT EXIT -N
    Entering OE_ORDER_PVT.LINES 1: 15-OCT-09 18:31:47
    ---------LOOPING FOR NTH TIME N= 1
    OPERATION = CREATE SO SETTING OLD TO NULL
    Entering OE_LINE_UTIL.CONVERT_MISS_TO_NULL
    outside margin convert miss to null
    inside margin convert miss to null
    Exiting OE_LINE_UTIL.CONVERT_MISS_TO_NULL
    AT LINE LEVEL HEADER_ID22020
    Entering OE_HEADER_UTIL.LOCK_ROW
    Entering OE_HEADER_UTIL.QUERY_ROW
    Before caching OE_HEADER_UTIL.QUERY_ROW
    Exiting OE_HEADER_UTIL.QUERY_ROW
    selected for update, now compare
    STANDARD LINE
    L_MODE IS MODELS_AND_STANDARD
    0
    STARTING LINE LOOP. HEADER_ID = 22020
    Entering OE_ORDER_CACHE.Load_Item
    ENTERING OE_SYS_PARAMETERS.VALUE
    Going to get the value for MASTER_ORGANIZATION_ID
    ENTERING OE_SYS_PARAMETERS_PVT.VALUE
    VALUE FROM DB83
    Parameter value fetched from table.
    PARAMETER VALUE: 83
    p_key1 is5429
    prev item: 9.990000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000E+125
    l_key2 (Master organizion_id) is83
    p_key2 (ship_from_org_id) is88
    querying item from mtl_system_items
    querying based on ship_from_org
    Exiting OE_ORDER_CACHE.LOAD_ITEM
    Dual_uom_control is FALSE
    CHECK ATTRIBUTES SECURITY
    Enter OE_LINE_Security.Attributes
    ATTRIBUTE VALIDATION
    ENTERING OE_SYS_PARAMETERS.VALUE
    Going to get the value for MASTER_ORGANIZATION_ID
    ENTERING OE_SYS_PARAMETERS_PVT.VALUE
    Parameter value exists.
    PARAMETER VALUE: 83
    Enter procedure OE_validate_line.Attributes
    Header has got created in the same call
    Entering OE_ORDER_CACHE.LOAD_ORDER_HEADER
    Exiting OE_ORDER_CACHE.LOAD_ORDER_HEADER
    Entering OE_ORDER_CACHE.LOAD_LINE_TYPE
    p_key is not null
    before selecting line_type info : G_MISS_CHAR
    after selecting line_type info : G_MISS_CHAR
    tax_flag :
    Exiting OE_ORDER_CACHE.LOAD_LINE_TYPE
    Checking for Ship Dates....
    Checking for Arival Dates....
    item_relationship_type :
    preferred_grade:
    Exiting procedure OE_validate_line.Attributes
    AFTER ATTRIBUTE VALIDATION
    DEFAULT MISSING
    ENTER OE_DEFAULT_LINE.ATTRIBUTES
    Entering OE_ORDER_CACHE.LOAD_ORDER_HEADER
    Exiting OE_ORDER_CACHE.LOAD_ORDER_HEADER
    Entering OE_ORDER_CACHE.Load_Item
    ENTERING OE_SYS_PARAMETERS.VALUE
    Going to get the value for MASTER_ORGANIZATION_ID
    ENTERING OE_SYS_PARAMETERS_PVT.VALUE
    Parameter value exists.
    PARAMETER VALUE: 83
    p_key1 is5429
    prev item: 5429
    l_key2 (Master organizion_id) is83
    p_key2 (ship_from_org_id) is88
    Exiting OE_ORDER_CACHE.LOAD_ITEM
    IN DEFAULTING: FUNCTION GET_ITEM_TYPE
    THE INV ITEM IS5429
    line_category_code = ORDER
    retrobill_request_id =
    item_type_code =
    Entering OE_ORDER_CACHE.Load_Item
    ENTERING OE_SYS_PARAMETERS.VALUE
    Going to get the value for MASTER_ORGANIZATION_ID
    ENTERING OE_SYS_PARAMETERS_PVT.VALUE
    Parameter value exists.
    PARAMETER VALUE: 83
    p_key1 is5429
    prev item: 5429
    l_key2 (Master organizion_id) is83
    p_key2 (ship_from_org_id) is88
    Exiting OE_ORDER_CACHE.LOAD_ITEM
    CALLING GET_SMC
    DEFAULTING SMC FLAG
    GET SMC: TOP MODEL LINE ID :
    CALLING GET_ATO
    IN GET_ATO_LINE , ITEM_TYPE_CODE :STANDARD
    Entering OE_ORDER_CACHE.Load_Item
    ENTERING OE_SYS_PARAMETERS.VALUE
    Going to get the value for MASTER_ORGANIZATION_ID
    ENTERING OE_SYS_PARAMETERS_PVT.VALUE
    Parameter value exists.
    PARAMETER VALUE: 83
    p_key1 is5429
    prev item: 5429
    l_key2 (Master organizion_id) is83
    p_key2 (ship_from_org_id) is88
    Exiting OE_ORDER_CACHE.LOAD_ITEM
    GET_ATO_LINE: NY
    RETURN ATO_LINE_ID AS NULL
    ENTERING MODEL_OPTION_DEFAULTING
    LINE_ID TO DEFAULT:
    IB Owner:
    IB Install:
    IB Current:
    Entering OE_CONFIG_TSO_PVT.Is_Part_of_Container_Model..: 15-OCT-09 18:31:47
    Line Id :
    Top Model Line id:
    ATO Line id:
    operation :
    inv item : 5429
    Inventory Item id:5429
    ENTERING OE_SYS_PARAMETERS.VALUE
    Going to get the value for MASTER_ORGANIZATION_ID
    ENTERING OE_SYS_PARAMETERS_PVT.VALUE
    Parameter value exists.
    PARAMETER VALUE: 83
    BOM Item Type:4
    Replenish to Order:N
    Config Model Type:
    Top Container Model?:N
    Part of Container Model?:N
    Exiting OE_CONFIG_TSO_PVT.Is_Part_Of_Container_Model..: 15-OCT-09 18:31:47
    RETURNING FOR ITEM TYPE MODEL AND STANDARD
    TOLERANCE BELOW :
    TOLERANCE BELOW :
    ENTERING OE_SYS_PARAMETERS.VALUE
    Going to get the value for INSTALLMENT_OPTIONS
    ENTERING OE_SYS_PARAMETERS_PVT.VALUE
    Parameter value exists.
    PARAMETER VALUE:
    Before Defaulting P_Qty and P_Qty_Uom Values:
    Pricing Qty: 20
    Pricing UOM:
    Ordered Qty: 20
    Ordered UOM: EA
    Entering OE_ORDER_CACHE.Load_Item
    ENTERING OE_SYS_PARAMETERS.VALUE
    Going to get the value for MASTER_ORGANIZATION_ID
    ENTERING OE_SYS_PARAMETERS_PVT.VALUE
    Parameter value exists.
    PARAMETER VALUE: 83
    p_key1 is5429
    prev item: 5429
    l_key2 (Master organizion_id) is83
    p_key2 (ship_from_org_id) is88
    Exiting OE_ORDER_CACHE.LOAD_ITEM
    Dual_uom_control is FALSE
    SHIP FROM OR SHIP METHOD IS NULL/MISSING
    Entering OE_ORDER_CACHE.LOAD_ORDER_HEADER
    Exiting OE_ORDER_CACHE.LOAD_ORDER_HEADER
    CALLING GET SHIPPABLE_FLAG
    1 , ATO_LINE_ID:
    Entering OE_ORDER_CACHE.Load_Item
    ENTERING OE_SYS_PARAMETERS.VALUE
    Going to get the value for MASTER_ORGANIZATION_ID
    ENTERING OE_SYS_PARAMETERS_PVT.VALUE
    Parameter value exists.
    PARAMETER VALUE: 83
    p_key1 is5429
    prev item: 5429
    l_key2 (Master organizion_id) is83
    p_key2 (ship_from_org_id) is88
    Exiting OE_ORDER_CACHE.LOAD_ITEM
    SHIPPABLE FLAG: Y
    SETTING RE_SOURCE_FLAG TO N
    EXIT OE_DEFAULT_LINE.ATTRIBUTES
    APPLY ATTRIBUTE CHANGES
    Entering OE_LINE_UTIL.APPLY_ATTRIBUTE_CHANGES
    Entering OE_ORDER_CACHE.LOAD_ORDER_HEADER
    Exiting OE_ORDER_CACHE.LOAD_ORDER_HEADER
    Entering OE_ORDER_CACHE.GET_TAX_CALCULATION_FLAG
    Entering OE_ORDER_CACHE.LOAD_LINE_TYPE
    p_key is not null
    Exiting OE_ORDER_CACHE.LOAD_LINE_TYPE
    ENTER RETURN_LINE
    EXIT , THIS IS A REGULAR LINE
    Entering OE_ORDER_CACHE.LOAD_CUST_TRX_TYPE
    Exiting OE_ORDER_CACHE.LOAD_CUST_TRX_TYPE
    Exiting OE_ORDER_CACHE.GET_TAX_CALCULATION_FLAG
    Entering OE_ORDER_CACHE.Enforce_List_price
    Exiting OE_ORDER_CACHE.Enforce_List_price
    old calculate price flag G_MISS_CHAR
    new calculate price flagY
    Freeze method is :BOOKING
    FTE IS NOT INSTALLED!
    OE_GLOBALS.G_PRICING_RECURSION:N
    Entering OE_LINE_UTIL.UPDATE_ADJUSTMENT_FLAGS
    New Item, dont have to do anything
    Exiting OE_LINE_UTIL.UPDATE_ADJUSTMENT_FLAGS
    Freeze method is :BOOKING
    FTE IS NOT INSTALLED!
    FTE IS NOT INSTALLED!
    Ordered Qty has changed
    New Ordered Qty : 20
    Old Ordered Qty :
    Freeze method is :BOOKING
    B2315926_2:
    FTE IS NOT INSTALLED!
    FTE IS NOT INSTALLED!
    Entering OE_ORDER_CACHE.Load_Item
    ENTERING OE_SYS_PARAMETERS.VALUE
    Going to get the value for MASTER_ORGANIZATION_ID
    ENTERING OE_SYS_PARAMETERS_PVT.VALUE
    Parameter value exists.
    PARAMETER VALUE: 83
    p_key1 is5429
    prev item: 5429
    l_key2 (Master organizion_id) is83
    p_key2 (ship_from_org_id) is88
    Exiting OE_ORDER_CACHE.LOAD_ITEM
    Dual_uom_control is FALSE
    FTE IS NOT INSTALLED!
    FTE IS NOT INSTALLED!
    ENTERING OE_SYS_PARAMETERS.VALUE
    Going to get the value for ENABLE_FULFILLMENT_ACCEPTANCE
    ENTERING OE_SYS_PARAMETERS_PVT.VALUE
    Parameter value fetched from table.
    PARAMETER VALUE:
    CSH --OUT of l_copy_service_field condition
    LEAVING OE_MSG_PUB.ADD
    ENTER SET RECURSION MODE
    ENTITY CODE-5
    ENTRY-EXIT MODE -0
    RECURSION MODE AT ENTRY -N
    RECURSION MODE WITHOUT EXP AT ENTRY -N
    RECURSION MODE AT EXIT -N
    RECURSION MODE WITHOUT EXP AT EXIT -N
    PO: EXITING PROCESS ORDER WITH UNEXPECTED ERROR
    ENTER SET RECURSION MODE
    ENTITY CODE-1
    ENTRY-EXIT MODE -0
    RECURSION MODE AT ENTRY -N
    RECURSION MODE WITHOUT EXP AT ENTRY -N
    RECURSION MODE AT EXIT -N
    RECURSION MODE WITHOUT EXP AT EXIT -N
    DELETE REQUEST12
    ENTERING DELETE_ATTRIBUTE_CHANGES -1
    LEAVING OE_MSG_PUB.COUNT_AND_GET 1
    Entering OE_HEADER_UTIL.GET_VALUES
    In OE_Contracts_util.check_license
    cache already has value, OE_CONTRACTS_UTIL.G_BSA_CNTR_LICENSE: N
    Exiting OE_HEADER_UTIL.GET_VALUES
    ENTERING OE_SYS_PARAMETERS.VALUE
    Going to get the value for MASTER_ORGANIZATION_ID
    ENTERING OE_SYS_PARAMETERS_PVT.VALUE
    Parameter value exists.
    PARAMETER VALUE: 83
    ENTERING OE_SYS_PARAMETERS.VALUE
    Going to get the value for MASTER_ORGANIZATION_ID
    ENTERING OE_SYS_PARAMETERS_PVT.VALUE
    Parameter value exists.
    PARAMETER VALUE: 83
    Entering OE_HEADER_UTIL.GET_IDS
    Exiting OE_HEADER_UTIL.GET_IDS
    Entering OE_HEADER_UTIL.GET_IDS
    Exiting OE_HEADER_UTIL.GET_IDS
    ENTER SET RECURSION MODE
    ENTITY CODE-1
    ENTRY-EXIT MODE -1
    RECURSION MODE AT ENTRY -N
    RECURSION MODE WITHOUT EXP AT ENTRY -N
    RECURSION MODE AT EXIT -N
    RECURSION MODE WITHOUT EXP AT EXIT -N
    ENTERING OE_ORDER_PUB.PROCESS_ORDER
    LEAVING OE_MSG_PUB.INITIALIZE
    ENTER PROCESS_ORDER_AG
    BEFORE HEADER PROCESSING
    HEADER_ID
    OPERATIONCREATE
    ENTER SET RECURSION MODE
    ENTITY CODE-2
    ENTRY-EXIT MODE -1
    RECURSION MODE AT ENTRY -N
    RECURSION MODE WITHOUT EXP AT ENTRY -N
    RECURSION MODE AT EXIT -N
    RECURSION MODE WITHOUT EXP AT EXIT -N
    ENTERING OE_ORDER_PVT.HEADER
    OE_ORDER_PVT.HEADER AFTER INIT CONTROL REC
    OPERATION = CREATE SO SET OLD TO NULL
    Entering OE_HEADER_UTIL.CONVERT_MISS_TO_NULL
    Exiting OE_HEADER_UTIL.CONVERT_MISS_TO_NULL
    ENTER OE_HEADER_SECURITY.ATTRIBUTES
    VALIDATE ATTRIBUTES
    Entering OE_VALIDATE_HEADER.ATTRIBUTES
    Entering OE_ORDER_CACHE.LOAD_INVOICE_TO_ORG
    Exiting OE_ORDER_CACHE.LOAD_INVOICE_TO_ORG
    Entering OE_ORDER_CACHE.LOAD_ORDER_TYPE
    Exiting OE_ORDER_CACHE.LOAD_ORDER_TYPE
    Entering OE_ORDER_CACHE.LOAD_Payment_Term
    Exiting OE_ORDER_CACHE.LOAD_Payment_Term
    Entering OE_ORDER_CACHE.LOAD_Salesrep_rec
    Exiting OE_ORDER_CACHE.LOAD_Salesrep
    Exiting OE_VALIDATE_HEADER.ATTRIBUTES
    DEFAULT MISSING
    ENTERING OE_SYS_PARAMETERS.VALUE
    Going to get the value for INSTALLMENT_OPTIONS
    ENTERING OE_SYS_PARAMETERS_PVT.VALUE
    Parameter value exists.
    PARAMETER VALUE:
    In OE_Contracts_util.check_license
    cache already has value, OE_CONTRACTS_UTIL.G_BSA_CNTR_LICENSE: N
    SET CODE
    AFTER SET CODE
    Enter get_freight_carrier()
    Entering OE_ORDER_CACHE.LOAD_SET_OF_BOOKS
    ENTERING OE_SYS_PARAMETERS.VALUE
    Going to get the value for SET_OF_BOOKS_ID
    ENTERING OE_SYS_PARAMETERS_PVT.VALUE
    ENTERING OE_SYS_PARAMETERS_PVT.GET_AR_SYS_PARAMS ...
    Getting the AR details from the cache ..
    Exiting OE_ORDER_CACHE.LOAD_SET_OF_BOOKS
    AFTER DEFAULT MISSING
    APPLY ATTRIBUTE CHANGES
    Entering OE_HEADER_UTIL.APPLY_ATTRIBUTE_CHANGES
    Raj1
    Raj2
    LEAVING OE_MSG_PUB.ADD
    ENTER SET RECURSION MODE
    ENTITY CODE-2
    ENTRY-EXIT MODE -0
    RECURSION MODE AT ENTRY -N
    RECURSION MODE WITHOUT EXP AT ENTRY -N
    RECURSION MODE AT EXIT -N
    RECURSION MODE WITHOUT EXP AT EXIT -N
    DELETE REQUEST2
    ENTERING DELETE_ATTRIBUTE_CHANGES -1
    PO: EXITING PROCESS ORDER WITH UNEXPECTED ERROR
    ENTER SET RECURSION MODE
    ENTITY CODE-1
    ENTRY-EXIT MODE -0
    RECURSION MODE AT ENTRY -N
    RECURSION MODE WITHOUT EXP AT ENTRY -N
    RECURSION MODE AT EXIT -N
    RECURSION MODE WITHOUT EXP AT EXIT -N
    DELETE REQUEST12
    ENTERING DELETE_ATTRIBUTE_CHANGES -1
    LEAVING OE_MSG_PUB.COUNT_AND_GET 1
    Entering OE_HEADER_UTIL.GET_VALUES
    In OE_Contracts_util.check_license
    cache already has value, OE_CONTRACTS_UTIL.G_BSA_CNTR_LICENSE: N
    Exiting OE_HEADER_UTIL.GET_VALUES
    ENTERING OE_SYS_PARAMETERS.VALUE
    Going to get the value for MASTER_ORGANIZATION_ID
    ENTERING OE_SYS_PARAMETERS_PVT.VALUE
    Parameter value exists.
    PARAMETER VALUE: 83
    ENTERING OE_SYS_PARAMETERS.VALUE
    Going to get the value for MASTER_ORGANIZATION_ID
    ENTERING OE_SYS_PARAMETERS_PVT.VALUE
    Parameter value exists.
    PARAMETER VALUE: 83
    Entering OE_HEADER_UTIL.GET_IDS
    LEAVING OE_MSG_PUB.ADD
    Exiting OE_HEADER_UTIL.GET_IDS
    Entering OE_HEADER_UTIL.GET_IDS
    Exiting OE_HEADER_UTIL.GET_IDS
    ENTER SET RECURSION MODE
    ENTITY CODE-1
    ENTRY-EXIT MODE -1
    RECURSION MODE AT ENTRY -N
    RECURSION MODE WITHOUT EXP AT ENTRY -N
    RECURSION MODE AT EXIT -N
    RECURSION MODE WITHOUT EXP AT EXIT -N
    ENTERING OE_ORDER_PUB.PROCESS_ORDER
    LEAVING OE_MSG_PUB.INITIALIZE
    ENTER PROCESS_ORDER_AG
    BEFORE HEADER PROCESSING
    HEADER_ID
    OPERATIONCREATE
    ENTER SET RECURSION MODE
    ENTITY CODE-2
    ENTRY-EXIT MODE -1
    RECURSION MODE AT ENTRY -N
    RECURSION MODE WITHOUT EXP AT ENTRY -N
    RECURSION MODE AT EXIT -N
    RECURSION MODE WITHOUT EXP AT EXIT -N
    ENTERING OE_ORDER_PVT.HEADER
    OE_ORDER_PVT.HEADER AFTER INIT CONTROL REC
    OPERATION = CREATE SO SET OLD TO NULL
    Entering OE_HEADER_UTIL.CONVERT_MISS_TO_NULL
    Exiting OE_HEADER_UTIL.CONVERT_MISS_TO_NULL
    ENTER OE_HEADER_SECURITY.ATTRIBUTES
    VALIDATE ATTRIBUTES
    Entering OE_VALIDATE_HEADER.ATTRIBUTES
    Entering OE_ORDER_CACHE.LOAD_INVOICE_TO_ORG
    Exiting OE_ORDER_CACHE.LOAD_INVOICE_TO_ORG
    Entering OE_ORDER_CACHE.LOAD_ORDER_TYPE
    Exiting OE_ORDER_CACHE.LOAD_ORDER_TYPE
    Entering OE_ORDER_CACHE.LOAD_Payment_Term
    Exiting OE_ORDER_CACHE.LOAD_Payment_Term
    Entering OE_ORDER_CACHE.LOAD_PRICE_LIST
    Exiting OE_ORDER_CACHE.LOAD_PRICE_LIST
    Entering OE_ORDER_CACHE.LOAD_Salesrep_rec
    Exiting OE_ORDER_CACHE.LOAD_Salesrep
    Exiting OE_VALIDATE_HEADER.ATTRIBUTES
    DEFAULT MISSING
    ENTERING OE_SYS_PARAMETERS.VALUE
    Going to get the value for INSTALLMENT_OPTIONS
    ENTERING OE_SYS_PARAMETERS_PVT.VALUE
    Parameter value exists.
    PARAMETER VALUE:
    In OE_Contracts_util.check_license
    cache already has value, OE_CONTRACTS_UTIL.G_BSA_CNTR_LICENSE: N
    SET CODE
    AFTER SET CODE
    Enter get_freight_carrier()
    Entering OE_ORDER_CACHE.LOAD_SET_OF_BOOKS
    ENTERING OE_SYS_PARAMETERS.VALUE
    Going to get the value for SET_OF_BOOKS_ID
    ENTERING OE_SYS_PARAMETERS_PVT.VALUE
    ENTERING OE_SYS_PARAMETERS_PVT.GET_AR_SYS_PARAMS ...
    Getting the AR details from the cache ..
    Exiting OE_ORDER_CACHE.LOAD_SET_OF_BOOKS
    AFTER DEFAULT MISSING
    APPLY ATTRIBUTE CHANGES
    Entering OE_HEADER_UTIL.APPLY_ATTRIBUTE_CHANGES
    Raj1
    Raj2
    LEAVING OE_MSG_PUB.ADD
    ENTER SET RECURSION MODE
    ENTITY CODE-2
    ENTRY-EXIT MODE -0
    RECURSION MODE AT ENTRY -N
    RECURSION MODE WITHOUT EXP AT ENTRY -N
    RECURSION MODE AT EXIT -N
    RECURSION MODE WITHOUT EXP AT EXIT -N
    DELETE REQUEST2
    ENTERING DELETE_ATTRIBUTE_CHANGES -1
    PO: EXITING PROCESS ORDER WITH UNEXPECTED ERROR
    ENTER SET RECURSION MODE
    ENTITY CODE-1
    ENTRY-EXIT MODE -0
    RECURSION MODE AT ENTRY -N
    RECURSION MODE WITHOUT EXP AT ENTRY -N
    RECURSION MODE AT EXIT -N
    RECURSION MODE WITHOUT EXP AT EXIT -N
    DELETE REQUEST12
    ENTERING DELETE_ATTRIBUTE_CHANGES -1
    LEAVING OE_MSG_PUB.COUNT_AND_GET 1
    Entering OE_HEADER_UTIL.GET_VALUES
    In OE_Contracts_util.check_license
    cache already has value, OE_CONTRACTS_UTIL.G_BSA_CNTR_LICENSE: N
    Exiting OE_HEADER_UTIL.GET_VALUES
    ENTERING OE_SYS_PARAMETERS.VALUE
    Going to get the value for MASTER_ORGANIZATION_ID
    ENTERING OE_SYS_PARAMETERS_PVT.VALUE
    Parameter value exists.
    PARAMETER VALUE: 83
    ENTERING OE_SYS_PARAMETERS.VALUE
    Going to get the value for MASTER_ORGANIZATION_ID
    ENTERING OE_SYS_PARAMETERS_PVT.VALUE
    Parameter value exists.
    PARAMETER VALUE: 83
    Request help.
    Thank you
    Vijosh
    Edited by: user8690315 on Oct 20, 2009 12:19 AM

    Hi,
    I am also same problem while creating the Sales Order.
    Did you find any solution for this problem??
    Thanks,
    -- Eric.

  • SOA Suite 11g Clustering error/oracle bug ?

    Hi, i got several experiment to implement soa suite 11g clustering, in my company.. at this moment we still use development mode in our application server. now i'm trying to get into production and also i want cluster the server.. here is the chronology what i do.
    i got 3 server :
    my plan is
    server #1 become an proxy server, let say the name is soa_proxy
    server #2 become an cluster node, let say the name is soa_server1
    server #3 become an cluster node, let say the name is soa_server2
    so i start install & configure it (applications is running under Windows Server 2003)
    1.*soa_proxy*
    - Installing WebLogic server
    - Installing SOA
    - Create Repository with RCU (oracle 10g database)
    2.*soa_server1*
    - Installing WebLogic server
    - Installing SOA
    3.*soa_server2*
    - Installing WebLogic server
    - Installing SOA
    after installation finished, then i create domain in soa_proxy server let say it name 'MyDomain', then i assign the soa_server1 and soa_server2 in cluster node named 'MyCluster', also i assign the soa_proxy server as a HTTP Proxy Server.. i'm following the instructions just like this link Link: [http://download.oracle.com/docs/cd/E12839_01/doc.1111/e13925/config_screens.htm#CJAEABGD]
    all the installation seems good, but when i try to deploy my composite application into the proxy server 'soa_proxy' with JDev, i got error like this
    Image: !http://img9.imageshack.us/img9/2122/error2z.jpg!
    and when i go to Http://hostname:7001/em
    i just see my composite deployed only in 'soa_server2'.
    UPDATE : well, now the error was gone when deploying. but we still got little odd result,
    when i deploy with jdev, it still fine, until i go to the enterprise manager. yess still.. my composite only deplyed in 'soa_server1'. i got some reference that we can copy the domain directory in soa_proxy and then paste into the server that not yet been deployed before. its seems oke..
    i've been thinking, how if i got 10 node of cluster? 50 node of cluster ? should i copy the directory just like that ?? is there another charmed way to do it???
    can somebody help me with this simple case?
    regards
    Wildan
    Edited by: wildsoft on Feb 12, 2010 11:33 AM
    =======
    here is my last trial to deploy the cluster environment, then i just got the same issues, our team here think thats the issues causing by oracle bug in code behind. for reminder what i do last experiment
    1. we deploy/configure the domain (admin console,cluster node) then starting up all the services smoothly without no issues & as we saw in the console monitor we can see the cluster is syncronizing.
    2. then we create simple composite.
    3. we try to deploy the composite to the cluster domain, and what we got is the composite only deployed in one cluster node.
    let me describe to clear it,
    * first trial, when we deploy the composite, here is what we got in em console
    *[-] SoaInfra (SoaServer1)*
    [+] CompositeLabTest
    *[-] SoaInfra (SoaServer2)*
    in JDev we also saw this message (the project CompositeLabTest Deploy Process is skipped), some kind like that
    * second time trial, we try to shut the SoaServer2 down, then restart it, what we got in em console
    *[-] SoaInfra (SoaServer1)*
    [+] CompositeLabTest
    *[-] SoaInfra (SoaServer2)*
    [+] CompositeLabTest
    . so until today my soa suite 11g clustering experience is never going good practice.. any of you may had experience with clustering too, how that can be done? please respon...
    thanks
    regards
    Wildan Abdat
    Edited by: wildsoft on Apr 27, 2010 4:08 PM
    Edited by: wildsoft on Apr 27, 2010 4:13 PM

    Hi there.
    Me too I have a similar problem with cluster deployment.
    I have two different domains in two different phisical machine on the same LAN.
    These domains are equals and the sole difference is regarding the IP configuration:
    domain 1
    machine 172.0.0.1
    soaadmin 172.0.0.1
    soa1 172.0.0.2
    soa1 172.0.0.3
    domain 2
    machine 172.0.1.1
    soaadmin 172.0.1.1
    soa1 172.0.1.2
    soa1 172.0.1.3
    When I try to deploy a new composite from the EM this fails (it remains in waiting for a response like the followed)
    <Jun 18, 2010 10:42:00 AM CEST> <Warning> <org.apache.myfaces.trinidadinternal.context.RequestContextImpl> <BEA-000000> <Could not find partial trigger idArchiveFileBrowserDialog from RichInputText[UIXEditableFacesBeanImpl, id=idArchiveLoc]>
    Processing sar=/tmp/dir2448127768139530528tmp/sca_SOAComposite1_rev1.0.jar
    Adding sar file - /tmp/dir2448127768139530528tmp/sca_SOAComposite1_rev1.0.jar
    Creating HTTP connection to host:172.0.0.2, port:10002
    What I checked:
    In multicast configuration soa1 (domain1) sent the request to all soa servers in the LAN (even in that one that aren't configurated in his domain)
    In unicast configuration soa1 (domain1) sent the request only to the soa2 (domain1) server but it remain in waiting for a response for all the time.
    What it is strange is that if I stop the domain2 the request can be performed and my composite is deployed in both the servers.
    Any idea about this strange behaviour?
    N.B.
    I'm not using Coherence.

  • Errors installing SOA Suite 11g

    Good morning
    This is an odd error. I am installing a brand new environment for SOA-SUITE 11g on a test database before going through the pain to complete this in our development environment. I am using RCU to build the environment as instructed and am allowing RCU to handle everything but constructing the schemas. I have created the schemas manually via SQL*Plus.
    This process has worked in the past so I'm at a loss for explaining these errors. In creating the SOAINFRA, I am receving the following errors:
    ORA-60019: Creating initial extent of size 14 in tablespace of extent size 13
    ORA-06512: at "SYS.DBMS_AQADM", line 81
    ORA-06512: at line 2
    JDBC SQLException handled by error handler
    2012-06-08 09:09:30.929 rcu:Extracting Statement from File Name: 'D:\rcuHome\rcu\integration\soainfra\sql\fabric\createschema_edndb_oracle.sql'Line Number: 157
    2012-06-08 09:09:30.929 rcu:Extracted SQL Statement: [begin
    DBMS_AQADM.create_queue_table(queue_table=>'edn_oaoo_delivery_table', queue_payload_type=>'edn_oaoo_delivery',
    multiple_consumers=>TRUE);
    DBMS_AQADM.create_queue(queue_name=>'edn_oaoo_queue', queue_table=>'edn_oaoo_delivery_table');
    DBMS_AQADM.start_queue(queue_name=>'edn_oaoo_queue');
    end;
    2012-06-08 09:09:30.929 rcu:Statement Type: 'BEGIN/END Anonymous Block'
    JDBC SQLException - ErrorCode: 60019SQLState:99999 Message: ORA-60019: Creating initial extent of size 14 in tablespace of extent size 13
    ORA-06512: at "SYS.DBMS_AQADM", line 81
    ORA-06512: at line 2
    JDBC SQLException handled by error handler
    2012-06-08 09:09:35.547 rcu:Extracting Statement from File Name: 'D:\rcuHome\rcu\integration\soainfra\sql\fabric\createschema_edndb_oracle.sql'Line Number: 167
    2012-06-08 09:09:35.547 rcu:Extracted SQL Statement: [declare
    sub sys.aq$_agent;
    begin
    sub := sys.aq$_agent('edn_java_subscriber', NULL, NULL);
    DBMS_AQADM.add_subscriber(queue_name=>'edn_event_queue', subscriber=>sub);
    end;
    2012-06-08 09:09:35.547 rcu:Statement Type: 'BEGIN/END Anonymous Block'
    JDBC SQLException - ErrorCode: 24010SQLState:99999 Message: ORA-24010: QUEUE EDN_EVENT_QUEUE does not exist
    ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
    ORA-06512: at "SYS.DBMS_AQADM_SYS", line 6268
    ORA-06512: at "SYS.DBMS_AQADM", line 364
    ORA-06512: at line 5
    JDBC SQLException handled by error handler
    2012-06-08 09:09:35.781 rcu:Extracting Statement from File Name: 'D:\rcuHome\rcu\integration\soainfra\sql\fabric\createschema_edndb_oracle.sql'Line Number: 174
    2012-06-08 09:09:35.781 rcu:Extracted SQL Statement: [declare
    sub sys.aq$_agent;
    begin
    sub := sys.aq$_agent('edn_oaoo_subscriber', NULL, NULL);
    DBMS_AQADM.add_subscriber(queue_name=>'edn_oaoo_queue', subscriber=>sub);
    end;
    2012-06-08 09:09:35.781 rcu:Statement Type: 'BEGIN/END Anonymous Block'
    JDBC SQLException - ErrorCode: 24010SQLState:99999 Message: ORA-24010: QUEUE EDN_OAOO_QUEUE does not exist
    ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
    ORA-06512: at "SYS.DBMS_AQADM_SYS", line 6268
    ORA-06512: at "SYS.DBMS_AQADM", line 364
    ORA-06512: at line 5
    JDBC SQLException handled by error handler
    Now, I thought this was a tablespace space issue but here is a report on the status of all tablespaces.
    Free Space Layout
    Total Max Total
    Number Free Free Available
    Tablespace of Space Space Space Percent
    Name Fragments (Meg) (Meg) (Meg) Free
    EXAMPLE 3 36 33 346 10.271
    SOA_SUITE_DATA_01 1 101 101 101 99.853
    SOA_SUITE_DATA_02 1 101 101 101 99.853
    SYSAUX 114 560 500 1,161 48.272
    SYSTEM 2 503 499 1,241 40.532
    UNDOTBS1 18 40 21 105 37.917
    USERS 2 101 100 106 95.224
    I even granted RESOURCE in case the tool needed UNLIMITED TABLESPACE.
    Does anyone have any ideas here? Any help would be greatly appreciated
    Stephen Karniotis

    Hi Stephen
    "I am using RCU to build the environment as instructed and am allowing RCU to handle everything but constructing the schemas. I have created the schemas manually via SQL*Plus"
    Do you mean you are not running RCU utility command from D:\rcuHome\bin\rcu.cmd folder ? As far as I know, this is the supported and easiest way to create any Schemas for any SOA Middleware product like SOA, BPM, OBIEE, ODI, WebCenter etc etc. I am not sure if directly running sql scripts will work and if its possible also.
    I would prefer running rcu.cmd command and provide Database SYS username, password with db details like db host, port, sid. Incase if db credentials are secret and not given to you, simply ask that DB Adminstrator to run this RCU command. Just unzip this file and run rcu.cmd and provide all the details. This do NOT need any other thing at all. Its pretty straight forward.
    RCU command takes care of all the things. Create tablespaces, schemas, then create all the stuff inicluding tables, sequeneces, packages and compile them also.
    Finally if you use Oracle XE 10g Edition, run one line to set this value before you run rcu.cmd -> set RCU_JDBC_TRIM_BLOCKS=TRUE
    Thanks
    Ravi Jegga

  • Composite application deployment error : SOA SUITE 11g

    when trying to deploy a composite application to soa suite 11g, below error is occured. I read related threads on forum, then tried and checked everthing mentioned on them. but no luck, the problem is still the same.
    i am using Ubuntu 9.1, and installation order is weblogic server-rcu drop then create DB schemas-install soa suite by defining new domain. I also checked administrator user and newly created user which is assigned as SOAAdmin and SOAOperator.
    could anyone help on the same please?
    the last success messages ::
    MDS-10014 - import is completed. Total number of documents successfully processed : 19, total number of documents failed : 0.
    SOA-21045 - Calling coordinator to deploy default/Helloworld!1.0*f3bec318-d208-435d-bba7-86a496eec86c, with isForceDefault flag: true
    then failure messages ::
    WSM-06108 - Error initializing the Oracle WSM Policy Resolver because incorrect configuration is passed: {0} {1}.
    OWS-00532 - Failed to retrieve policy
    SOA-20003 - Unable to register service.
    SOA-21037 - Sending back error message: Error during deployment: Deployment Failed: Unable to register service...

    the solution is given below
    http://blogs.eteration.com/blog/?p=365

Maybe you are looking for

  • Customer Order Assigned to Tranport Order. Stock Available ?.

    Hello everybody, Our system release is 47.200. We are looking for run  a transport order assigned to a customer order. What happens: We have prepared the customizing and also a user exit to have the option to work with the assigned orders. Currently

  • Failed to parse eve:   please help

    failed to parse eve: /applications/adobe dreamweaver cc 2014.1/configuration/dialogs/eve/titanoptionaldialog.eve please help

  • Is it possible to run AM Modulation in LabVIEW PDA Module?

    Hi All,         I would like to ask about AM Modulation vis can run on PDA Module or not?Because as i mention that PDA screen is too small to see all the AM modulation waveforms.So i would like to know whether is it pissible to run AM Modulation on t

  • Trying to debug openUrl failing.

    I am trying to run the following code in the iPhone simulator: NSString* urlString = @"launchme:12345678910"; UIApplication* thisApp = [UIApplication sharedApplication]; NSURL* testURL = [NSURL URLWithString:urlString]; BOOL success = [thisApp openUR

  • Javax.transaction.SystemException: Timeout during commit processing

              In my Workshop 8.1 SP2 project I have a Custom Java Control whose methods I call           from my JPF. From that custom control I create a remote connection to a Weblogic           6.1 Application server. I execute remote methods and get t