EBS R12 Linux x86 2-node RAC
We are building a test environment on Linux with 4 physical servers. 2 physical servers will form a 2-node RAC. The other 2 physical servers are application nodes.
Can we run the CM processes on the application nodes and keep the database nodes just for the database tier? We want to keep the number of application tiers to a minimum so we don't have to spend a lot of time patching. We also plan to have multiple test databases so would like to share the same application tiers for multiple databases. I understand that we cannot keep the patch level different in this case.
Hi,
For using CM on application nodes, do i need to do anything different? For example, any database level parameters or does it need anything else. The reason i am asking is i see almost everyone running CM on database nodes. Is there a metalink note to enable concurrent processing on the application node? Should i use a shared application tier filesystem for this? See the docs in this thread.
PCP Configuration
PCP Configuration
Using a shared application tier file system is an option but it also creates a single point of failure. If i do a nfs mount of the filesystem to the second application node then if my first application node the entire application is down.
Is Sharing E-Business Suite Release 12 File System Among Multiple Database Instances not supported? I thought it is supported.If you mean different databases then it is not supported. The shared application tier nodes files should point to a single database.
Note: 384248.1 - Sharing The Application Tier File System in Oracle E-Business Suite Release 12
Note: 406558.1 - Configuring Applications Node Services in Oracle E-Business Suite Release 12
Thanks,
Hussein
Similar Messages
-
R12 Apps with 4 node RAC and 4 apps nodes - Post Install check list
Hi All,
We have a new Oracle Apps R12 instalaltion with 4 node RAC and 4 Apps nodes with load balancing and external web tier being done by an outside firm. We are assigned the responsibility of checking that everything has been configured properly both on the RAC side and Apps side. I haven't worked on RAC earlier. Please let me know what all need to be checked before approving the install done by the outside firm.
Thank you!Please check below metalink notes
RAC Assurance Support Team: RAC and Oracle Clusterware Starter Kit and Best Practices (Generic) [ID 810394.1]
Using Oracle 10g Release 2 Real Application Clusters and Automatic Storage Management with Oracle E-Business Suite Release 12 [ID 388577.1]
Using Oracle 11g Release 2 Real Application Clusters with Oracle E-Business Suite Release 12 [ID 823587.1]
Oracle E-Business Suite and Oracle Real Application Clusters Documentation Roadmap [ID 745759.1]
745759.1 Oracle E-Business Suite and Oracle Real Application Clusters Documentation Roadmap
384248.1 Sharing The Application Tier file system in Oracle E-Business Suite Release 12
387859.1 Using AutoConfig to Manage System Configurations with Oracle E-Business Suite Release 12
406982.1 Cloning Oracle Applications Release 12 with Rapid Clone
240575.1 RAC on Linux Best Practices
265633.1 Automatic Storage Management Technical Best Practices
Loadbalancer
note 380489.1 Using Load-Balancers with Oracle E-Business Suite Release 12
note 727171.1 Implementing Load Balancing On Oracle E-Business Suite - Documentation For Specific Load Balancer Hardware
note 601694.1 How To Check Session Persistence On BigIP F5 And Cisco Ace Load Balancer Appliances
note 603325.1 Using Cisco ACE Series Application Control Engine with Oracle E-Business Suite Release 12
Installation R12
note 761564.1 Oracle Applications Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86
note 402310.1 Oracle Applications Installation and Upgrade notes Release 12 (12.0) for Linux (32-bit)
note 559518.1 Cloning Oracle E-Business Suite Release 12 RAC-Enabled Systems with Rapid Clone
note 735276.1 Interoperability notes E-Business Suite R12 with Oracle Database 11gR1
Shared Applications Confiugurations:
note 380483.1 Oracle E-Business Suite Release 12 Additional Configuration and Deployment Options
note 384248.1 Sharing The Application Tier File System in Oracle E-Business Suite Release 12
Edited by: Amigo on Dec 20, 2010 9:58 AM -
Successfully applied RUP6 (6728000) on EBS R12 linux rhel4.6
Hi All,
I have successuflly applied RUP6 on our EBS R12.
The pre-reqs patch I applied is:
7305220
The post-reqs patches I applied are:
7109200
7653364
8222387
===================
The above patches went on smoothly and successfully.
Then here comes again the part I hated most ....to run autoconfig
on the apps and dbtiers.
You know I always encounter 90% error in autoconfig in all my installation even if they are successful. I can not understand why I always failed in autoconfig runs :(
autoconfig error
==========
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[INSTANTIATE PHASE]
AutoConfig could not successfully instantiate the following files:
Directory: /u02/appldev/DEV/inst/apps/DEV_orafin/ora/10.1.2/reports
Tk2Motif_AL32UTF8.rgb INSTE8
AutoConfig is exiting with status 1ThanksCheck your other thread ...
Http 404 The page cannot be found on EBS 11i (11.5.10.2) AIX
Re: Http 404 The page cannot be found on EBS 11i (11.5.10.2) AIX -
Converting EBS R12 database to RAC 11gR2
We are on EBS R12 with 11gR2 database. I read the document 823587.1 with emphasis on Section 3. We are planning to convert the existing EBS database to a 2-node RAC on new servers.
1. Install 11gR2 Grid Infrastructure on new servers.
2. Install 11gR2 database software on the 2 nodes with local disk.
3. Configure listener.
4. Implement and run Autoconfig on the 2 nodes.
5. Start Application processes.
I am not clear about how the data is migrated to the new servers with shared disk using ASM. How is this part done? Mind you, we are moving from a single node server to two brand new servers. I understand that part of using rconfig to convert from single node database to 2 node RAC. But we are not planning to use the existing database server as part of new RAC environment. Thanks.It sounds like you are trying to build out new boxes.
The Shared Storage will have to be setup first with the datafiles/control files, then you could clone the database to the new servers. with RMAN or some other method.
Your Sysadmin (Unix) should be able to help setting up the shared storage. then on the clone based on how you do it. The Datafiles can be mapped to the new storage area and/or ASM. The Tasks are slightly different. -
"Page cannot be displayed" error in EBS R12
Hi All,
We implemented EBS R12 with 2 Application Node, 2 CM nodes and 2 DB Nodes(RAC). We have also setup load balancer at the application level. We have enabled HTTPS at the load balancer level. Our application works perfectly fine except some of the PIM module related screens and especially Workflow Manager, it gives us "Page Cannot be displayed" error sometime. What we have observed is, Our URL is https://ebs.abcltd.com but when we click on Workflow manager link under Oracle Application Manager, the URL gets redireced to http://ebs.abcltd.com:443/. We would like it know why this redirection is happening? as we have not mentioned this (http://ebs.abcltd.com:443) url in our context file.
Thanks,
PrasadHi Prasad,
Can you find any errors in Apache/Workflow/Database log files when this error occur?
Did you verify the session persistence on the load balancer? -- See the documents referenced in this F5 Load Balancer with Oracle 11i.
Regards,
Hussein -
Hi,
I have a report output file report1.pdf coming from windows.
I ftp it to our EBS R12 linux server to the desired location.
How can I view it using the "view request" of the EBS CM?
Thanks a lotHi,
What do you mean by how to view the report? If you register the concurrent program, then you should be able to view the output using Acrobat Reader (since the type is PDF).
In addition, you should not upload the output file (.pdf), instead upload the rdf file under $PRODUCT_TOP/reports/<lang> directory.
Regards,
Hussein -
Autoconfig fail EBS R12 Apps-Node with EBS 11gR2 RAC
Platform: HPUX IA 64-11.31
DB: 11.2.0.3
Nodes: 2
We were following metalink note 823587.1 and have successfully converted single-instance database of EBS R12 to 20node RAC. When we are trying to do steps of Section-3.8 of the note the autoconfig is running in error. See the below error message from the "adconfig.log" file:
cat /etc/hosts
=========
127.0.0.1 localhost.localdomain localhost
#Public IP
172.16.101.23 ts1db1.bukhatir.ae ts1db1
172.16.101.24 ts1db2.bukhatir.ae ts1db2
#Vip
172.16.101.44 ts1_vip1.bukhatir.ae ts1_vip1
172.16.101.45 ts1_vip2.bukhatir.ae ts1_vip2
#inerconnect
10.0.0.1 ts1_prv1.bukhatir.ae ts1_prv1
10.0.0.2 ts1_prv2.bukhatir.ae ts1_prv2
172.16.101.20 ts1apps1.bukhatir.ae ts1apps1
172.16.101.21 ts1apps2.bukhatir.ae ts1apps2
=========
Generate Tns Names
Logfile: /locapps1/apps/apps/TEST_ts1apps1/admin/log/04101202/NetServiceHandler.log
Classpath : /ts1apps/apps/apps_st/comn/java/lib/appsborg2.zip:/ts1apps/apps/apps_st/comn/java/classes
Updating s_tnsmode to 'generateTNS'
UpdateContext exited with status: 0
AC-50480: Internal error occurred: java.lang.Exception: Error while generating listener.ora.
Error generating tnsnames.ora from the database, temporary tnsnames.ora will be generated using templates
Instantiating Tools tnsnames.ora
Tools tnsnames.ora instantiated
Web tnsnames.ora instantiated
adgentns.pl exiting with status 2
ERRORCODE = 2 ERRORCODE_END
xecuting script in InstantiateFile:
/locapps1/apps/apps/TEST_ts1apps1/admin/install/adgendbc.sh
script returned:
adgendbc.sh started at Tue Apr 10 12:03:56 UAE 2012
SQL*Plus: Release 10.1.0.5.0 - Production on Tue Apr 10 12:03:57 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter value for 1: Enter value for 2: Enter value for 3: Connected.
[ APPS_DATABASE_ID ]
Application Id : 0
Profile Value : TEST
Level Name: SITE
INFO : Updated/created profile option value.
PL/SQL procedure successfully completed.
Commit complete.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP,
Data Mining and Real Application Testing options
==============================
* * * * DBC PARAMETERS * * * *
==============================
fnd_jdbc_buffer_min=1
fnd_jdbc_buffer_max=5
fnd_jdbc_buffer_decay_interval=300
fnd_jdbc_buffer_decay_size=5
fnd_jdbc_usable_check=false
fnd_jdbc_context_check=true
fnd_jdbc_plsql_reset=false
====================================
* * * * NO CUSTOM PARAMETERS * * * *
====================================
Unique constraint error (00001) is OK if key already exists
Creating the DBC file...
java.sql.SQLException: The Network Adapter could not establish the connection
Database connection to jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS=(PROTOCOL=tcp)(HOST=ts1_vip1.bukhatir.ae)(PORT=1521))(ADDRESS=(PROTOCOL=tcp)(HOST=ts1_vip2.bukhatir.ae)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=TEST))) failed
ADD call failed with exit code 1
Updating Server Security Authentication
java.sql.SQLException: Invalid number format for port number
Database connection to jdbc:oracle:thin:@host_name:port_number:database failed
Updating Server Security Authentication failed with exit code 1
Restoring DBC file from backed up location /locapps1/apps/apps/TEST_ts1apps1/appltmp/TXK/TEST_Tue_Apr_10_12_03_2012.dbc
adgendbc.sh ended at Tue Apr 10 12:04:01 UAE 2012
adgendbc.sh exiting with status 1
ERRORCODE = 1 ERRORCODE_END
See the network configuration files from the environment:
===========
Dbhome
===========
/orahome/oradb/app/product/11.2.0.3/network/admin/TEST1_ts1db1/listener.ora
LISTENER_TEST =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = ts1_vip1.bukhatir.ae)(PORT = 1521)(IP = FIRST)))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = ts1db1)(PORT = 1521)(IP = FIRST)))
SID_LIST_LISTENER_TEST =
(SID_LIST =
(SID_DESC = (ORACLE_HOME = /orahome/oradb/app/product/11.2.0.3)(SID_NAME = TEST1))
STARTUP_WAIT_TIME_LISTENER_TEST = 0
CONNECT_TIMEOUT_LISTENER_TEST = 10
TRACE_LEVEL_LISTENER_TEST = OFF
LOG_DIRECTORY_LISTENER_TEST = /orahome/oradb/app/product/11.2.0.3/network/admin
LOG_FILE_LISTENER_TEST = TEST1
TRACE_DIRECTORY_LISTENER_TEST = /orahome/oradb/app/product/11.2.0.3/network/admin
TRACE_FILE_LISTENER_TEST = TEST1
ADMIN_RESTRICTIONS_LISTENER_TEST = ON
SUBSCRIBE_FOR_NODE_DOWN_EVENT_LISTENER_TEST = OFF
IFILE=/orahome/oradb/app/product/11.2.0.3/network/admin/TEST1_ts1db1/listener_ifile.ora
/orahome/oradb/app/product/11.2.0.3/network/admin/TEST1_ts1db1/tnsnames.ora
TEST=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1_vip1.bukhatir.ae)(PORT=1521))
(CONNECT_DATA=
(SERVICE_NAME=TEST)
(INSTANCE_NAME=TEST1)
TEST1=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1_vip1.bukhatir.ae)(PORT=1521))
(CONNECT_DATA=
(SERVICE_NAME=TEST)
(INSTANCE_NAME=TEST1)
TEST1_FO=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1_vip1.bukhatir.ae)(PORT=1521))
(CONNECT_DATA=
(SERVICE_NAME=TEST)
(INSTANCE_NAME=TEST1)
TEST_FO=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1_vip1.bukhatir.ae)(PORT=1521))
(CONNECT_DATA=
(SERVICE_NAME=TEST)
(INSTANCE_NAME=TEST1)
TEST1_LOCAL=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1_vip1.bukhatir.ae)(PORT=1521))
TEST_BALANCE=
(DESCRIPTION=
(ADDRESS_LIST=
(LOAD_BALANCE=YES)
(FAILOVER=YES)
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1_vip1.bukhatir.ae)(PORT=1521))
(CONNECT_DATA=
(SERVICE_NAME=TEST)
TEST_REMOTE=
(DESCRIPTION=
(ADDRESS_LIST=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1_vip1.bukhatir.ae)(PORT=1521))
#TEST_REMOTE=
# (DESCRIPTION=
# (ADDRESS_LIST=
# (ADDRESS=(PROTOCOL=tcp)(HOST=tsscan.bukhatir.ae)(PORT=1521))
TEST1_local=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1_vip1.bukhatir.ae)(PORT=1521))
extproc_connection_data =
(DESCRIPTION=
(ADDRESS_LIST =
(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCTEST1))
(CONNECT_DATA=
(SID=PLSExtProc)
(PRESENTATION = RO)
IFILE=/orahome/oradb/app/product/11.2.0.3/network/admin/TEST1_ts1db1/TEST1_ts1db1_ifile.ora
===========
Gridhome
===========
/gridhome/oragrid/11.2.0/grid/network/admin/listener.ora
LISTENER=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER)))) # line added by Agent
LISTENER_SCAN3=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN3)))) # line added by Agent
LISTENER_SCAN2=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN2)))) # line added by Agent
LISTENER_SCAN1=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN1)))) # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN1=ON # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN2=ON # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN3=ON # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER=ON # line added by Agent
/gridhome/oragrid/11.2.0/grid/network/admin/endpoints_listener.ora
LISTENER_TS1DB1=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ts1_vip1)(PORT=1521))(ADDRESS=(PROTOCOL=TCP)(HOST=172.16.101.23)(PORT=1521)(IP=FIRST)))) # line
added by Agent
===========
Listener EBShome
===========
cd $TNS_ADMIN
/locapps1/apps/apps/TEST_ts1apps1/ora/10.1.2/network/admin/listener.ora
APPS_TEST =
(ADDRESS_LIST =
(ADDRESS= (PROTOCOL= TCP)(Host= ts1apps1)(Port= 1629))
SID_LIST_APPS_TEST =
(SID_LIST =
( SID_DESC = ( SID_NAME = FNDSM )
( ORACLE_HOME = /ts1apps/apps/tech_st/10.1.2 )
( PROGRAM = /ts1apps/apps/apps_st/appl/fnd/12.0.0/bin/FNDSM )
( envs='MYAPPSORA=/ts1apps/apps/apps_st/appl/APPSTEST_ts1apps1.env,PATH=/usr/bin:/usr/ccs/bin:/bin,FNDSM_SCRIPT=/locapps1/apps/apps/TEST_ts1apps1/admin/scripts/gsmst
art.sh' )
( SID_DESC = ( SID_NAME = FNDFS )
( ORACLE_HOME = /ts1apps/apps/tech_st/10.1.2 )
( PROGRAM = /ts1apps/apps/apps_st/appl/fnd/12.0.0/bin/FNDFS )
( envs='EPC_DISABLED=TRUE,NLS_LANG=American_America.AL32UTF8,LD_LIBRARY_PATH=/ts1apps/apps/tech_st/10.1.2/lib32:/ts1apps/apps/tech_st/10.1.2/lib:/ts1apps/apps/tech_s
t/10.1.2/jdk/jre/lib/IA64N:/ts1apps/apps/tech_st/10.1.2/jdk/jre/lib/IA64N/server:/ts1apps/apps/apps_st/appl/sht/12.0.0/lib,SHLIB_PATH=/ts1apps/apps/tech_st/10.1.2/lib32:/ts1apps/apps
/tech_st/10.1.2/lib:/ts1apps/apps/tech_st/10.1.2/jdk/jre/lib/IA64N:/ts1apps/apps/tech_st/10.1.2/jdk/jre/lib/IA64N/server:/ts1apps/apps/apps_st/appl/sht/12.0.0/lib,LIBPATH=/ts1apps/ap
ps/tech_st/10.1.2/lib32:/ts1apps/apps/tech_st/10.1.2/lib:/ts1apps/apps/tech_st/10.1.2/jdk/jre/lib/IA64N:/ts1apps/apps/tech_st/10.1.2/jdk/jre/lib/IA64N/server:/ts1apps/apps/apps_st/ap
pl/sht/12.0.0/lib,APPLFSTT=TEST_BALANCE;TEST;TEST_FO,APPLFSWD=/locapps1/apps/apps/TEST_ts1apps1/appl/admin;/locapps1/apps/apps/TEST_ts1apps1/appltmp;/ts1apps/apps/apps_st/comn/webapp
s/oacore/html/oam/nonUix/launchMode/restricted' )
STARTUP_WAIT_TIME_APPS_TEST = 0
CONNECT_TIMEOUT_APPS_TEST = 10
TRACE_LEVEL_APPS_TEST = OFF
LOG_DIRECTORY_APPS_TEST = /locapps1/apps/apps/TEST_ts1apps1/logs/ora/10.1.2/network
LOG_FILE_APPS_TEST = APPS_TEST
TRACE_DIRECTORY_APPS_TEST = /locapps1/apps/apps/TEST_ts1apps1/logs/ora/10.1.2/network
TRACE_FILE_APPS_TEST = APPS_TEST
ADMIN_RESTRICTIONS_APPS_TEST = ON
IFILE = /locapps1/apps/apps/TEST_ts1apps1/ora/10.1.2/network/admin/TEST_ts1apps1_listener_ifile.ora
SUBSCRIBE_FOR_NODE_DOWN_EVENT_APPS_TEST = OFF
/locapps1/apps/apps/TEST_ts1apps1/ora/10.1.2/network/admin/tnsnames.ora
TEST = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1db1)(PORT=1521))
(CONNECT_DATA=(SID=TEST1))
# Net8 definitions for FNDFS and FNDSM on the HTTP server node - ts1apps1
FNDFS_ts1apps1 = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDFS))
FNDFS_ts1apps1.bukhatir.ae = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDFS))
# For when the profile FS_SVC_PREFIX is set these entries will be used
FNDFS_TEST1_ts1apps1 = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDFS))
FNDFS_TEST1_ts1apps1.bukhatir.ae = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDFS))
FNDSM_ts1apps1_TEST1 = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDSM))
FNDSM_ts1apps1.bukhatir.ae_TEST1 = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDSM))
# Net8 definitions for FNDFS and FNDSM on the forms server node - ts1apps1
FNDFS_ts1apps1 = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDFS))
FNDFS_ts1apps1.bukhatir.ae = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDFS))
# For when the profile FS_SVC_PREFIX is set these entries will be used
FNDFS_TEST1_ts1apps1 = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDFS))
FNDFS_TEST1_ts1apps1.bukhatir.ae = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDFS))
FNDSM_ts1apps1_TEST1 = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDSM))
FNDSM_ts1apps1.bukhatir.ae_TEST1 = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDSM))
# Net8 definitions for FNDFS and FNDSM on the administration server node - ts1apps1
FNDFS_ts1apps1 = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDFS))
FNDFS_ts1apps1.bukhatir.ae = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDFS))
# For when the profile FS_SVC_PREFIX is set these entries will be used
FNDFS_TEST1_ts1apps1 = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDFS))
FNDFS_TEST1_ts1apps1.bukhatir.ae = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDFS))
FNDSM_ts1apps1_TEST1 = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDSM))
FNDSM_ts1apps1.bukhatir.ae_TEST1 = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDSM))
# Net8 definitions for FNDFS and FNDSM on the concurrent processing server node - ts1apps1
FNDFS_ts1apps1 = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDFS))
FNDFS_ts1apps1.bukhatir.ae = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDFS))
# For when the profile FS_SVC_PREFIX is set these entries will be used
FNDFS_TEST1_ts1apps1 = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDFS))
FNDFS_TEST1_ts1apps1.bukhatir.ae = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDFS))
FNDSM_ts1apps1_TEST1 = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDSM))
FNDSM_ts1apps1.bukhatir.ae_TEST1 = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDSM))
IFILE=/locapps1/apps/apps/TEST_ts1apps1/ora/10.1.2/network/admin/TEST_ts1apps1_ifile.oraYes, following message is also reported in the adconfig.log:
Unique constraint error (00001) is OK if key already exists
Creating the DBC file...
java.sql.SQLException: The Network Adapter could not establish the connection
Database connection to jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS=(PROTOCOL=tcp)(HOST=ts1_vip2.bukhatir.ae)(PORT=1523))(ADDRESS=(PROTOCOL=tcp)(HOST=
ts1_vip1.bukhatir.ae)(PORT=1523)))(CONNECT_DATA=(SERVICE_NAME=TEST))) failed
ADD call failed with exit code 1
Updating Server Security Authentication
java.sql.SQLException: Invalid number format for port number
Database connection to jdbc:oracle:thin:@host_name:port_number:database failed
Updating Server Security Authentication failed with exit code 1
Restoring DBC file from backed up location /locapps1/apps/apps/TEST_ts1apps1/appltmp/TXK/TEST_Mon_Apr_16_13_13_2012.dbc
adgendbc.sh ended at Mon Apr 16 13:13:46 UAE 2012
adgendbc.sh exiting with status 1
ERRORCODE = 1 ERRORCODE_END
.end std out.
.end err out.
Did you see Autoconfig has failed on Apps tier on adgendbc.cmd with error: ADD call failed with exit code 1, UPDATE call failed with exit code 1 [ID 359739.1]?But we have the file version:
$Header: AdminAppServer.java 120.11.12010000.6 2010/04/13 15:24:03 fskinner ship $ -
ORA-12514 on R12 EBS Apps server when 1 DB RAC node crashed/down
Just now Production 11.2.0.2 RAC DB on windows 2008 server Node1 crashed. While on Node 2 all services are up and running including database. But from EBS R12.1.2 application server when connecting as username/password from sql*plus is throwing ORA-12514 error.
While It is connecting if I give username/password@TNSNAME but not without @TNSNAME. Due to this none of the application services are starting.
Please help/advise. Thank you.
Following is the tnsnames.ora,
# This file is automatically generated by AutoConfig. It will be read and
# overwritten. If you were instructed to edit this file, or if you are not
# able to use the settings created by AutoConfig, refer to Metalink Note
# 387859.1 for assistance.
#$Header: NetServiceHandler.java 120.19.12010000.6 2010/03/09 08:11:36 jmajumde ship $
ORCL=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=orcldbscan)(PORT=1521))
(CONNECT_DATA=
(SERVICE_NAME=ORCL)
(INSTANCE_NAME=ORCL1)
ORCL1=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=orcldbscan)(PORT=1521))
(CONNECT_DATA=
(SERVICE_NAME=ORCL)
(INSTANCE_NAME=ORCL1)
ORCL1_FO=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=orcldbscan)(PORT=1521))
(CONNECT_DATA=
(SERVICE_NAME=ORCL)
(INSTANCE_NAME=ORCL1)
ORCL_FO=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=orcldbscan)(PORT=1521))
(CONNECT_DATA=
(SERVICE_NAME=ORCL)
(INSTANCE_NAME=ORCL1)
ORCL1=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=orcldbscan)(PORT=1521))
(CONNECT_DATA=
(SERVICE_NAME=ORCL)
(INSTANCE_NAME=ORCL1)
ORCL1_FO=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=orcldbscan)(PORT=1521))
(CONNECT_DATA=
(SERVICE_NAME=ORCL)
(INSTANCE_NAME=ORCL1)
ORCL2=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=orcldb2-vip.sa.company.net)(PORT=1521))
(CONNECT_DATA=
(SERVICE_NAME=ORCL)
(INSTANCE_NAME=ORCL2)
ORCL2_FO=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=orcldb2-vip.sa.company.net)(PORT=1521))
(CONNECT_DATA=
(SERVICE_NAME=ORCL)
(INSTANCE_NAME=ORCL2)
ORCL_BALANCE=
(DESCRIPTION=
(ADDRESS_LIST=
(LOAD_BALANCE=YES)
(FAILOVER=YES)
(ADDRESS=(PROTOCOL=tcp)(HOST=orcldb1-vip.sa.company.net)(PORT=1521))
(ADDRESS=(PROTOCOL=tcp)(HOST=orcldb2-vip.sa.company.net)(PORT=1521))
(CONNECT_DATA=
(SERVICE_NAME=ORCL)
FNDFS_orclAPPL=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=orclAPPL.sa.company.net)(PORT=1626))
(CONNECT_DATA=
(SID=FNDFS)
FNDFS_orclAPPL.sa.company.net=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=orclAPPL.sa.company.net)(PORT=1626))
(CONNECT_DATA=
(SID=FNDFS)
FNDFS_ORCL_orclAPPL=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=orclAPPL.sa.company.net)(PORT=1626))
(CONNECT_DATA=
(SID=FNDFS)
FNDFS_ORCL_orclAPPL.sa.company.net=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=orclAPPL.sa.company.net)(PORT=1626))
(CONNECT_DATA=
(SID=FNDFS)
FNDSM_orclAPPL_ORCL=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=orclAPPL.sa.company.net)(PORT=1626))
(CONNECT_DATA=
(SID=FNDSM)
FNDSM_orclAPPL.sa.company.net_ORCL=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=orclAPPL.sa.company.net)(PORT=1626))
(CONNECT_DATA=
(SID=FNDSM)
FNDFS_APPLTOP_orclappl=
(DESCRIPTION=
(ADDRESS_LIST=
(ADDRESS=(PROTOCOL=tcp)(HOST=orclAPPL.sa.company.net)(PORT=1626))
(CONNECT_DATA=
(SID=FNDFS)
IFILE=E:\ORACLE\ORCL\INST\APPS\ORCL_orclappl\ora\10.1.2\network\admin\ORCL_orclappl_ifile.oraA database/OS crash shouldn't have such impact on your configuration. Please review the following docs and verify your setup.
Using Oracle 11g Release 2 Real Application Clusters with Oracle E-Business Suite Release 12 (Doc ID 823587.1)
Configuring and Managing E-Business Application Tier for RAC (Doc ID 1311528.1)
Thanks,
Hussein -
Multi-Node RAC-EBS R12 document
Hi All,
I am looking for high level steps for a clone of a multi-node RAC-EBS install along with expected times.
Could someone please share such a document for R12?
Thanks for your time!
Regards,Hi
It is mandatory to be certified for RAC clones.
Note: 783188.1 - Certified RAC Scenarios for E-Business Suite Cloning
You have not mentioned what kind of clone do you looking for whether it's Multi-Multi or Multi -Single,please see the below thread for multi to single instance
Please see this docs
Clone multi-node RAC and ASM to single node
Thanks
yakub -
How migrate Oracle 2 node RAC to EBS R12
Hi
How to migrate normal oracle 2node rac to ebs r12.
Regards,
Subba.Happy to help you ... well I would be if I had any idea what you are asking.
A two node RAC cluster is two physical servers, and a storage array, running a single Oracle database of unknown version number: No application and no application server.
EBS R12, I presume, is a totally different product named E-Business Suite version 12.x
They have different architectures, different licensing, different, resource requirements, and totally different management requirements.
So I see two possible answers to your inquiry.
1. You far more clearly explain what you are asking.
2. You burn the two-node RAC cluster to the ground and install the product you want. That said would recommend not putting the application components of EBS on the two node cluster so you will need at least one additional server. -
At the beginning of install EBS R12 on Ubuntu 8.04 amd64 (Linux Debian)
Bonjour,
Need help, please.
At the beginning of install EBS R12 on Ubuntu 8.04 amd64 (Linux Debian)
ATI graphic driver: "ati-driver-installer-8-4-x86.x86_64.run"
All prerequisites are installed.
appmgr@ubu:~$ /d01/Stage12/startCD/Disk1/rapidwiz/rapidwiz
Terminal output:
Rapid Install Wizard is validating your file system......
4 dvd labels found
Rapid Install Wizard will now launch the Java Interface.....
appmgr@ubu:~$ Locking assertion failure. Backtrace:
#0 /usr/lib32/libxcb-xlib.so.0 [0xf73cd767]
#1 /usr/lib32/libxcb-xlib.so.0(xcb_xlib_unlock+0x31) [0xf73cd8b1]
#2 /usr/lib32/libX11.so.6(_XReply+0xfd) [0xcddf31bd]
#3 /d01/Stage12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.5.0/lib/i386/xawt/libmawt.so [0xce162a76]
#4 /d01/Stage12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.5.0/lib/i386/xawt/libmawt.so [0xce14880a]
#5 /d01/Stage12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.5.0/lib/i386/xawt/libmawt.so [0xce148a51]
#6 /d01/Stage12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.5.0/lib/i386/xawt/libmawt.so(Java_sun_awt_X11GraphicsEnvironment_initDisplay+0x24) [0xce148c5c]
#7 [0xf2437fa8]
#8 [0xf2431aeb]
#9 [0xf2431aeb]
#10 [0xf242f1b4]
#11 /d01/Stage12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.5.0/lib/i386/server/libjvm.so [0xf765734c]
#12 /d01/Stage12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.5.0/lib/i386/server/libjvm.so [0xf77f7c08]
#13 /d01/Stage12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.5.0/lib/i386/server/libjvm.so [0xf765717f]
#14 /d01/Stage12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.5.0/lib/i386/server/libjvm.so(JVM_DoPrivileged+0x2dd) [0xf76a636d]
#15 /d01/Stage12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.5.0/lib/i386/libjava.so(Java_java_security_AccessController_doPrivileged__Ljava_security_PrivilegedAction_2+0x3d) [0xf73762cd]
#16 [0xf2437838]
#17 [0xf2431a14]
#18 [0xf242f1b4]
#19 /d01/Stage12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.5.0/lib/i386/server/libjvm.so [0xf765734c]
Locking assertion failure. Backtrace:
#0 /usr/lib32/libxcb-xlib.so.0 [0xf73cd767]
#1 /usr/lib32/libxcb-xlib.so.0(xcb_xlib_lock+0x2e) [0xf73cd81e]
#2 /usr/lib32/libX11.so.6 [0xcddf2518]
#3 /usr/lib32/libX11.so.6(XGetVisualInfo+0x26) [0xcdde90a6]
#4 /d01/Stage12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.5.0/lib/i386/xawt/libmawt.so [0xce1476df]
#5 /d01/Stage12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.5.0/lib/i386/xawt/libmawt.so [0xce147970]
#6 /d01/Stage12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.5.0/lib/i386/xawt/libmawt.so [0xce148b98]
#7 /d01/Stage12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.5.0/lib/i386/xawt/libmawt.so(Java_sun_awt_X11GraphicsEnvironment_initDisplay+0x24) [0xce148c5c]
#8 [0xf2437fa8]
#9 [0xf2431aeb]
#10 [0xf2431aeb]
#11 [0xf242f1b4]
#12 /d01/Stage12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.5.0/lib/i386/server/libjvm.so [0xf765734c]
#13 /d01/Stage12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.5.0/lib/i386/server/libjvm.so [0xf77f7c08]
#14 /d01/Stage12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.5.0/lib/i386/server/libjvm.so [0xf765717f]
#15 /d01/Stage12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.5.0/lib/i386/server/libjvm.so(JVM_DoPrivileged+0x2dd) [0xf76a636d]
#16 /d01/Stage12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.5.0/lib/i386/libjava.so(Java_java_security_AccessController_doPrivileged__Ljava_security_PrivilegedAction_2+0x3d) [0xf73762cd]
#17 [0xf2437838]
#18 [0xf2431a14]
#19 [0xf242f1b4]
The window titled « Install Oracle Applications - Welcome » is displayed but empty;
I Click [ X ] at the top right corner;
The windows titled « Oracle Applications Rapid Install Wizard Alert » is displayed, asking « Are you sure you want to exit ? » I say [ Yes ];
On the Terminal, I press Ctrl C.
I choose Ubuntu that is easy to use. I tried and abandoned Oracle EL5 and Solaris.Need help N°2, please.
Install started well. I am facing another lot of errors, quoted as below: -----
In the windows "System Check Details" - File Space check:
-- database node space checks --
RW-20013: Error: - Not enough free disk space on system:
Database Transaction File Directory = /d01/oracle/VIS/db/apps_st/data
required = 65064
actual = 38180
RW-20013: Error: - Not enough free disk space on system:
Database Archive File Directory = /d01/oracle/VIS/db/apps_st/data
required = 44798
actual = 38180
(all other Disk spaces were accepted.)
Where I can correct the disk space allocation ? There are 67 GB free disk space on my pc, avalaible space before VIS install was 270 GB approximatively.
--------------------- -
Oracle EBS R12.1.3 High Availability with RAC 11g on VMWARE
Dear All,
Our customer requirement is of high availability and good utilization of hardware for EBS R12.13 implementation.As per our strategy we want to use Oracle VM(I think it doesn't require any licensing) , RAC 11gR2 and appstier load balancing.We have only two servers to achieve all these.One one node there will be two VMs one for dbtier and another one for appstier and same will be on second server.So this way we will be having four virtual machines on two physical nodes.For all these we will use OEL Linux as Operating system
Please share your experiences , if above deployment model is correct or need further enhancements.
Regards.Our customer requirement is of high availability and good utilization of hardware for EBS R12.13 implementation.As per our strategy we want to use Oracle VM(I think it doesn't require any licensing) , Please contact your Oracle Sales representative for license questions.
RAC 11gR2 and appstier load balancing.We have only two servers to achieve all these.One one node there will be two VMs one for dbtier and another one for appstier and same will be on second server.So this way we will be having four virtual machines on two physical nodes.For all these we will use OEL Linux as Operating system
Please share your experiences , if above deployment model is correct or need further enhancements.Please see these docs.
Using Oracle VM Templates for Oracle E-Business Suite [ID 975734.1]
Using Oracle VM with Oracle E-Business Suite Release 11i or Release 12 [ID 465915.1]
Oracle E-Business Suite High Availability on Oracle VM [ID 986690.1]
Certified Software on Oracle VM [ID 464754.1]
Oracle VM General Frequently Asked Questions [ID 464756.1]
Thanks,
Hussein -
Converting single instance database(11gr2) supporting EBS 12.1.3 to 2 node RAC on RHEL.
Hi We are in the process of converting single instance database(11gr2) supporting EBS 12.1.3 to 2 node RAC on RHEL. Which version of RHEL is better? if its 6.x then x?? The oracle document only says RHEL update 6.
thanks in advance.Hi,
Yes you can use any version but i recommend you to use 6.2
Also refer my post for RAC migration in EBS
Apps DBA Workshop: Using 11gR2 RAC with Oracle Applications R12.1.1
Hope this helps
thanks,
X A H E E R -
Step By Step Implementation of RAC in Oracle EBS R12 (version 12.0.4)
Hi,
Can anyne suggest me any Document in metalink or any other useful document on the
*"Step By Step Implementation of RAC in Oracle EBS R12 (version 12.0.4)"*.
My Database Version is 10g Enterprise Edition Release 10.2.0.4.0 and my Platform is HP-UX ia64.How To Find Out The Example of The LOCAL_LISTENER and REMOTE_LISTENER Defined In The init.ora When configuring the 11i or R12 on RAC ? [ID 744508.1]
1072636.1 - Oracle E-Business Suite Release 12 High Availability Documentation Roadmap
Please check Hussein's discussion before
Rac and R12
R12 with RAC
Rac and R12
Moving from NON-RAC to RAC
R12 and RAC
Re: R12.1-RAC
EBS R12 on Linux with RAC -
Oracle EBS R12 on OS Linux 64bit vs Windows 2003 64bit
Dear All,
Oracle EBS R12 with DB 10gR2 64bit
on Linux- 64bit vs Windows 2003 64bit
Any data/whitepaper/comments, those can help to take decision with respect to performance on OS Linux- 64bit vs Windows 2003 64bit.
Management wants basically following:
•Technical advantages/disadvantages of Linux 64bit
•Technical advantages/disadvantages of windows 64bitPlease refer to:
Note: 197031.1 - 32-bit/64-bit Certification/Conversion Issues on Oracle Applications 11i
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=197031.1
Note: 343917.1 - Frequently Asked Questions: Oracle E-Business Suite Support on x86-64
xhttps://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=343917.1
Google should be also helpful.
Linux 64-bit vs Windows 64-bit
http://www.google.com/search?q=Linux+64%2dbit+vs+Windows+64%2dbit
Maybe you are looking for
-
I am no longer able to purchase songs from iTunes.
When I click on the "buy" icon in iTunes, nothing happens. I don't get a warning, or anything. Just nothing happens. I can click on the arrow to the right of the "buy" icon and get the drop down menu that includes "gift this song, add to wish list" e
-
Create a single tall image from a multi-page pdf file
I would like to take a multi-pake pdf file, and have all of the pages "appended" from top to bottom edge to create a single tall image. I am a teacher, and I currently do this by hand, I am then able to annotate the entire page and croll down an enti
-
Hi, os platform= oracle linux database = 11g 11.1.0.7 apps = 12.1.2 regarding choosing load balancer which load balancer is good for Ebusiness suite instance Hardware level or software level kibndly advice
-
Restrict selection using wildcards
hie guys I have a select statement where i need to restrict the selected items where values in a field are ZP% SELECT * FROM marc INTO xmarc WHERE matnr IN material and werks ne 'ZP%'. IF sy-subrc = 0. APP
-
Partially automated field catalog
Hi friends, i know about fully automated field catalog using fm REUSE_ALV_FIELDCATALOG_MERGE and i know about building field catlog manually , but can any one explain me about partially automated field catalog with sample program. points will be giv