EBS R12 Report Printing using PASTA

Hi Friends,
Can you help me with my printing set-up please. I am priting a standard reports but the
printing is not centered. It has big margin on the left (like 3 inches ) and the right side columns
overshooted.
How do I adjust my printing to move for right to left by scale? or How do i choose paper size?
Or how do I print macro like a font 6 instead of normal 12?
Thanks a lot

Duplicate Post (Check your other thread):
EBS R12 Report Printing using PASTA
Re: EBS R12 Report Printing using PASTA

Similar Messages

How to suppress extra form feed for character report printing using ORARRP?

Dear All,
We are using Oracle Application Server 10g (10.1.2.0.2) on Windows 2003 Server and most of our client PC's are Windows XP Professional machines. We are migrating our existing oracle application from 2-tier architecture to 3-tier architecture (6i to 10g). We have installed ORARRP utility for remote direct printing and to a limited extent we are successfull in getting the things work out for our system users, However, we are facing a problem using the ORARRP utility for which we are not able to find a solution till date.
We have configured ORARRP utility on every user's PC and the printing of bitmap reports is working well. However, while printing CHARACTER reports using ORARRP utility, after the report gets printed, an EXTRA FORM FEED is issued by ORARRP to the printer and because of this the printer stationary skips one extra page and advances to the next page. Please note that this EXTRA FORM FEED happens only while printing a CHARACTER REPORT.
Has anyone come across such a problem using ORARRP ? How can we avoid this extra FORM FEED from CHARACTER REPORT printing using ORARRP ? Is there any other tool which supports remote direct printing just like ORARRP?
I shall be highly obliged if anyone could reply to my queries ASAP.
Regards,
KrishnaKumar S

Please help ! I tried the "send_form_feed" and "postscript_dos_print" parameters without success. The extra form feed is always there. Thanks.

EBS R12 Shared Printer Setup

Hi guys
We are using EBS R12 (12.0.6) and the environment is linux 64bit (RHEL 5.x). Right now all our concurrent jobs are producting .pdf outputs for Sales Orders, RMA etc. Our trading (retail) sector has a performance issue due to the time waiting for the pdf to popup and then to print etc.
Hence we are analyzing the possibilities of sending the outputs straight to the printers (at present no printers are configured) to avoid the above said situation.
Most of our showrooms are using shared printers (LQ-850, Epson dot matrix) which are shared minimum between two salesmen. Please let me know once the printers are setup with the application, how the print jobs will be completed. ie, whether the application will automatically popup the print dialog box with default printer selected etc.
Thanks and regards,
raj

I fixed this by choosing another printer protocoll by printer setup. HP protocoll fixed it. In the server manager I chose IPP. An everything worked fine after that.
Message was edited by: Christian Kuehn

Crystal report printing using epson dot matrix printer (continouos paper)

Hi there, im tiff from the philippines.
i have a question on printing using a crystal report. How do i print using epson continuous printer(dot matrix)? im having a problem printing to that type of printer specially using continuous paper. the first page is correct but unfortunately the succeeding pages are not. its automatically adjusted upon reaching the second page. hope you can help me.
thanks a lot and looking forward to hear from you soon.
tiff

Check with the printer manufacturer that the matrix printer is Unicode compliant. If it is not, it will not work with Crystal Reports. If it is, make sure you have the latest printer driver updates.
Download SP 1 for CR 102 from here;
https://smpdl.sap-ag.de/~sapidp/012002523100006007872008E/crvs05sp1.exe
See the following resources re. printers;
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a09051e9-721e-2b10-11b6-f9c65c64ef29
[Note #1314394|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do]
Ludek

Total No of pages different in report printed using Crystal Report XI R2 vs SAP Crystal Reports, developer version for Microsoft Visual Studio (File Version 13.8)

Currently in our application, we are using Crystal Report XI R2 for generating the reports. We are in the process of upgrading the Crystal Report to SAP Crystal Reports, developer version for Microsoft Visual Studio (File Version 13.8). I updated that on my machine and all the reports work fine. I didn't have to modify any of the reports.
However when comparing the reports, we found that there are few reports on which the total no. of pages differ from the report displayed using Crystal Report XI R2 vs SAP Crystal Reports, developer version for Microsoft Visual Studio (File Version 13.8). Comparing the reports, it looks all the data that were fit on one page earlier with version XI R2 doesn't fit on the same page with version 13.8, thereby increasing the page counts.
The fonts, page margins everything set on report itself. Nothing being set in the code.
Both the application is using the same report that is pulling the data from the same database. Our application is a web application.
Any suggestion, why this is happening.
Thanks.
Sanjay

I am not sure what is being compared here?
CRXI R2 designer to CRVS?
CR XI R2 in some version of .NET to CRVS?
CR XI R2 using RDC SDK to CRVS?
Also, is this happening on your development computer or after you deploy?
If you compare the the "Page setup" options dialog between reports that work and those that do not work, do you see any difference?
Is this a web or a win app?
Are you seeing the same issue when viewing and exporting - say export to PDF?
What is the printer driver used and it's version?
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Oracle EBS R12 - DR setup using Oracle Data Guard

Hi,
Our customer has implemented Oracle EBS R12 (12.0.6) on a Two Node RAC on HP-UX env. The application Tier also has Two Nodes(Admin Tier and Web Tier).
Oracle Clusterware - OCR and Vote Disk are on Raw Devices and the EBS database is on ASM.
Customer wants to implement a DR solution with Oracle Data Guard with only 2 servers - 1 for the Database Tier and 1 for the Application Tier on the DR Site.
I would like to know if this could be done by following note: 452056.1? I would also like to know if there are other useful docs.
Thanks.
Thiru

Hi,
Customer escalated this issue to Oracle and they came up with this reply:
They can implement Disaster recovery solution from RAC to NON RAC using Solution A which use RMAN utilities for backup and recovery.
While now AMP Application Management Pack gives the capablitiy to build non RAC from RAC Envioment, In future AMP will be capable also to support cloning of DB with Data Guard.
Details
Solution A - Using RMAN:
For Release 12 customers, you can clone from a RAC to RAC (like to like) or RAC to non-RAC. This is using RMAN scripts to take a copy of the db when it’s in archive mode. if you’re leveraging any disaster recovery tools like data guard, the above solution should work fine…perhaps some fine tuning to the procedures
Solution B - Using AMP in the future release
For Release 11i , Release 12.x customers, AMP would be offering a new cloning solution that wouldn’t have dependency on Rapid Clone. This solution leverages the strengths of EM Grid Control in provisioning or cloning targets such as databases. This would be an advance solution that would support:
o A full-fledged scale down cloning
o Cloning of EBS deployed on Shared File System
o Hot and Cold mode cloning
o Quantifiable reduction in clone time for the entire EBS system
This solution would be leveraging EM grid Control’s DB provisioning pack’s clone utilities, that are quite advanced and support cloning of DB with Data Guard.
The recommendation is to start trialing AMP version 3.0, making the purchase and implementing within the Enterprise. As we release the new version of AMP (release 3.0.1), Customer would be in a better position to quickly implement the latest features
Can anyone let me know if the solution A suggested will work.
Rgds,
Thiru

Teststand automatic test report printing using LabView workaround

I tried the LabView workaround for the automatic printing of test reports in TestStand (see email message below).
It will work if I set the URL to a specific HTML TempReport. However, TestStand is configured to generate a unique test report for each UUT. So, in the test report directory there are xml reports and the occasional HTML report, example TestReport_00104.html. Not sure then what to set the URL to?
Note: Your reference number is included in the Subject field of this message. It is very important that you do not remove or modify this reference number, or your message may be returned to you.
Hi Bill,
Thanks you for your reply.
Right ok. Well, if you are interested in the LabVIEW workaround, I can send this to place it in your modified sequential model.
The workaround works as desired. It does it all automatically. I have set it to not prompt the user for the print dialogue but this can be easily changed. Therefore, for any example program in Teststand, if it is based on the modified sequential model, an HTML style report will be printed on the default printer automatically.
It needs to be placed in the following location:
Within the Sequential Model, within 'Single Pass>>Print Report' do the following:
- Replace all the 'Main' steps (Navigate to HTML, Print HTML File & Close IE Browser) with the LabVIEW function call.
- This one function call will do all the steps above at once.
NOTE: In the LabVIEW VI, you will need to select the correct directory where the new html files are being created. Otherwise the print function will not work. This is called URL. Make you sure you have checked this.
For ease of understanding I have included these steps in a word document with screen shots.
As I do not know which version of LabVIEW you might have, I have attached three versions of the .vi file; 2012, 2011 and 2010.
In regards to the mention of Teststand not having built in functionality for automatic printing of reports, unfortunately this is the case.
I hope this will be a sufficient workaround for you.
If you problems implementing this solution, please ask me for further information. However, it should be fairly simple to do.
Just to inform you, I will be out of the office from 12.45pm today for the rest of the week on annual leave.
I will be back in the office on Monday 14th January 2013, should you have any further queries.
Kind Regards,
Dominic Clarke
National Instruments
Applications Engineering
www.ni.com/support
Attachments:
Print HTML file from LabVIEW.zip ‏39 KB

Hi Bill,
I managed to implement this.
In the sequential model I added a LabVIEW action after 'Add Root Tags To XML Report'
As URL I use a sequence local: Locals.ReportFilePath
I points to the ML report in my case and then the VI works fine.
However I'm looking for extra functionality and that is waiting untill printing is completed.
Can you help me on that ?

ACCENT Symbol in Oracle Reports printing using 10g Application server

Some of the report with names containing ACCENT symbol are printing like upside-down comma. But the report used to printing certified copy and the client requiring to print the ACCENT symbol as it is. Oracle support recommend us to use PDFPrint destination, which is third-party utility that converting the post-script output to printer for ACCENT symbol. Please provide the link and instruction to download the PDFprint utility and installation requirement for the below environment:
Oracle Application Server Version=10.1.2.3.0
SUN SPARC - 64 bit
Thanks
Krishna

By the looks of it you used 9i which also used an Application Server so your knowledge should be up to date. The Default URL has changed a little as has the port. Look in the installation guide for the default URL and port.
If you mena the development side you can use the one-button-run functionality which makes it possible to run am form without the full App Server just by hitting the run button in the builder. You do need to start the local OC4J but that is easy. On Windows there is a start menu item to do that. On Linux you run a shell script I think.

EBS R12 - Multipl Instance using Single Databse ( with Different SID )

Hi,
Is it possible to create Multiple R12 EBS instance (i.e. TEST and DEV ), in to Single Database ( using same database binary ).
Or Can these different EBS instance , configured with Single Database using differant Oralce SID ( means creating Multiple databases with Single binary )
Please guide,
Thanks

Is it possible to create Multiple R12 EBS instance (i.e. TEST and DEV ), in to Single Database ( using same database binary ).No.
Or Can these different EBS instance , configured with Single Database using differant Oralce SID ( means creating Multiple databases with Single binary )No -- Each instance/database should have its own ORACLE_HOME.
Thanks,
Hussein

Using QUERY_FIND by date range EBS-R12

   HI ,
I have developed a custom form for EBS R12, and i used the standard technique to develop it,
I also used the QUERY_FIND object group to display search form. using below code in the pre-query trigger of the block
BEGIN
   IF :parameter.g_query_find = 'TRUE'
   THEN
      COPY (:query_find.item,
            'my_block.item'
      :parameter.g_query_find := 'FALSE';
   END IF;
END;
and everything is working fine.
but now i need to search for a DATE item, and the search should be by Date From and Date to.
I can't use the copy function to do the search for date range.
so i want to know the standard way that I should use to do such search.
I thought to used SET_BLOCK_PROPERTY and change the DEFAULT_WHERE
is this a standard way to do this search, or there is other way to do that.
Best Regards
Amir

Hi,
Try something like this:
SELECT       grad_stu_id
FROM       grad_fee_structure_hist
GROUP BY grad_stu_id
HAVING       COUNT ( CASE
                  WHEN DATE '2010-09-01' BETWEEN grad_eff_fee_date
                                           AND        grad_exp_fee_date
                THEN 1
            END
          )     > 0
AND       COUNT ( CASE
                  WHEN DATE '2009-09-01' BETWEEN grad_eff_fee_date
                                           AND        grad_exp_fee_date
                THEN 1
            END
          )     = 0
;If a NULL grad_fee_exp_date means that the row is currently in force, then use something like
NVL ( grad_fee_exp_date
    , DATE '9999-12-31'
    )instead of the raw date.
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements) and the results you want from that data. Explain how you get those results from that data, giving specific examples.
Always say what version of Oracle you're using.
Edited by: Frank Kulash on Sep 13, 2010 11:08 AM
Changed date comparisons to BETWEEN.

Can anyone share how to integrate Demantra Demand Management to EBS R12?

Hi all,
Can anyone suggest how to integrate Demantra Demand Management to EBS R12?
I use Demantra 7.2 and EBS R12.
I search in Manual and in some blogs but not much data support. If possible, I want step-by-step starting from set up such as setup the instance.
More of my concern are;
- Is Demantra can integrate with MRP, without APS or ASCP?
- Is that necessary to integrate by using seed data? If I implement my series with all new series, how can I suppose to link them to EBS?
Thank you in advance.
Best Regards,
Tanya T.

Hi Tanya,
To begin with, you can refer to the Metalink doc 434991.1 for an in-depth explanation on the integration from a technical perspective. Apart from this, there is an ocean of knowledge in the Demantra Documentation libraby in the metalink.The Implementation Guide provides an overview of the integration processes that synchronize or move data between Oracle Demantra and E-Business Suite applications.
Now coming to your concerns:
- Can Demantra be integrated with MRP, without APS or ASCP?
After going through the above mentioned documents on Demantra, if you still want an integrated instance of Demantra and MRP without using APS, then it will have to be a highly customized solution.This scenario will obviously have a great impact on various business aspects,which is out of scope of this discussion.
- Is it necessary to integrate by using seeded data?How to link new series to EBS?
The Demantra - EBS integration adds two new responsibilities for Demand Management viz. i)Demand Management System Administrator and ii)Demand Analyst.
The System Administrator creates a new user in the E-Business Suite with the relevant responsibility for which the user is automatically created in Oracle Demantra.
The user with "Demand management system Administrator" responsibility can create new series that get added in the Demand management component on creation. This series can then be used as per requirement.
I hope my comments help.Feel free for further discussions.
Regards,
Shekhar

Oracle EBS R12.1.1 for Windows Installation

Hi,
Is there a way to install Oracle EBS R12 for Windows (using the express install) without providing the Unix Tookit Directory, Visual Studio Directory, and the Domain info? I do not know where to get these configuration information. Please help.
Thanks,

Hi,
You cannot install Oracle E-Business Suite 11i/R12 without installing all pre-req. OS software. To get these software packages, you need to contact the vendors (the links are referenced in the document below).
Note: 761567.1 - Oracle Applications Installation and Upgrade Notes Release 12 (12.1.1) for Microsoft Windows Server (32-bit)
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=761567.1
Regards,
Hussein

How to call Siebel wsdl from EBS R12

Dear Gurus,
Is there anyone knows how to call Siebel wsdl file generated from EBS R12, directly without using middleware/weblogic ?
Please help
Thanks in advance
Eldin

Hi Eldin,
From where do you intend to invoke the WSDL?
Through SQl, PL/SQL - By implementing Web Service Call-Out in the database. Refer http://download.oracle.com/docs/cd/B32110_01/web.1013/b28974/devdbase.htm#BDCGJJHD.
From Forms/OAF page - By using Jdeveloper to develop the proxy/stub, which can subsequently be used in the OAF page/ Forms
Refer: http://www.oracle.com/webfolder/technetwork/tutorials/obe/forms/webservicefromforms/ws_10_1_3_from_forms.html
Hope this helps.
Pls update the thread with your progress.
Regards,
Sujoy

Windows 7 for EBS R12

Hi Hussein,
Our boss give us band new laptops for our coming big project so that we will look smart :).
Since I was the first to select I chose the 4gb ram , coz some have 3Gb.
We are ask to install windows 7 so we dont pay for license.
The problem is win I installed windows 7 is installed the 64-bit as default. i dont know why.
I can not install the jinitiators for firefox and ie8. I cant not also install my oracle clients.
Are there 64bit jinitiators?
What made me surprised is that the 3Gb laptop have installed 32bit, or I dont know what happened
bacause they can install jiniitiators and they can access EBS R12 and 11i using ie8 and firefox.
They said my work around is to install vmware and install XP on top of my windows 7.
Are there any other opions better than these?
How do you select 32 bit from windows 7? I did not see any choices when I installed it.
Thanks a lot

Hi,
Are there 64bit jinitiators? I do not think so. Even if you can find 64-bit of this software, this OS is not yet certified as a client OS.
Are there any other opions better than these? Apart from installing VMWare, I believe there is no other option (except installing a certified OS directly).
How do you select 32 bit from windows 7? I did not see any choices when I installed it.Sorry, I do not get your question here.
Regards,
Hussein

Unable to Define EBS R12 Data Load Mappings in FDMEE

Hi,
I am trying to integrate EBS R12 and HFM using FDMEE 11.1.2.3.500. Here are the steps that I followed:
a. Configured the EBS_DATA_SERVERS and PHYSICAL SCHEMAS in ODI to point to EBS Instance using APPS User
b. Defined EBS R12 Source System and Clicked INITIALIZE. (Validated that the Initialization Process is completed without any Errors)
c. Selected the Approriate SOURCE ACCOUTING ENTITIES for R12 Source System
Now, when I define a new IMPORT LOCATION, I am unable to see any EBS related SOURCE SEGMENTS under DATA LOAD MAPPING Grid under Import Format
Is there something done incorrectly? Also strangely, I dont even see any RESPONSIBILITIES in the SOURCE ACCOUNTING ENTITES when I want to define the Drill Through feature
Thanks,
Mohit

One reason that you might not see entries in the segments drop down is due to the entries being filtered according to browser language or FDMEE user language settings for localization purposes. You might want to try adjusting the Setup > User Settings > User Language in FDMEE to see if that can make the segments appear.
We've got a US English EBS 12 source system to test with and if I change Setup > User Settings > User Language in FDMEE to something other than English United States then save and go back to the import format screen, segment drop down boxes are now completely empty. If I change back to en-us then they're back again. I believe that either the browser accept language or the User Language setting in FDMEE needs to match the 'base language' on the source system registration screen.
With a bit of luck that might be it

EBS R12 Report Printing using PASTA

Similar Messages

Maybe you are looking for