ECatt Webdynpro ABAP problems

Hello everbody,
we are trying to script a webdynpro ABAP application with eCatt.
We have completed the system configuration steps (see below), but still when trying to record we are getting the error message:
"An error probably occurred during the logon to the Web Dynpro target system. Check user and password in the target system."
We have set up a HTTP connection to the target system with a preset username / password combination in the authentication details. We also log into the target system with this username / password combination directly just fine.
What could we be missing?
Some more questions:
Is eCatt supposed to execute the webdynpro on the target system as the user defined in the http connection or as the user executing / recording the script?
What user should be set in the http connection in the first place? I'm assuming its not the ecatt_http user because that one doesnt even exist in the target system (the guides only ask for this user to be created in the ecatt system)
Regards & Thanks in advance,
Thomas

Thomas Stoffels wrote:
> We have set up a HTTP connection to the target system with a preset username / password combination in the authentication details. We also log into the target system with this username / password combination directly just fine.
Just check, if HTTPS is off on this connection.
Thomas Stoffels wrote:
> Some more questions:
> Is eCatt supposed to execute the webdynpro on the target system as the user defined in the http connection or as the user executing / recording the script?
> What user should be set in the http connection in the first place? I'm assuming its not the ecatt_http user because that one doesnt even exist in the target system (the guides only ask for this user to be created in the ecatt system)
Please take a deeper look into saphelp for RFC connections, to clearify, which user credentials are used with RFC connections.
Kind regards,
Christoph

Similar Messages

Webdynpro ABAP Caching Problem in Portal

Hi All,
We have developed custom applications using Webdynpro - ABAP, using FPM and accessing those applications through SAP Netweaver Portal 7.0. I have deactivated all the caching techniquies in Portal @ iview level and Page level, Portal Runtime and ContentFetch side, But still causing the same problem.
I have a doubt, wether this is happening because of SAP Logon Caching @ SAP WAS system level. I have checked the SSO parameter settings in RZ10 Profile parameters. Our basis people have set both accept and create parameter value = 1. Is this causing issue?
Or Is there any other settings which is required to do in Portal or SAP system level. Please let us know , really appreciate your value suggestions and help.
Please find the below links, which im referring to...
http://help.sap.com/saphelp_nwmobile71/helpdata/en/d2/91553b4d53273de10000000a114084/frameset.htm
http://help.sap.com/SAPHELP_NWPI71/helpdata/EN/48/69eb40e8a607d6e10000000a42189c/content.htm
Thanks in Advance
PRadeep
Edited by: Pradeep on Jan 28, 2009 9:10 AM

The delete icon will not show up in the line of the favorite/templates, if no hours are recorded on it. There is no transfer to the backend either, unless hours are recorded on these working time attributes. also ensure note 1986356 is implemented for details column check CAC2 for the CATS profile attached to the user in CVR in Su3

Webdynpro abap ALV export to excel with images problem

Hello experts,
I'm having problems with standard excel export functionality in webdynpro abap ALV.
In my table i have images taken from content server (employee photos) linked with URL to a table_cell Image, when i export the table to excel using standard function the images is showed as a broken picture with the following text:
"The linked image cannot displayed. The file may have been moved, or deleted. Verify that the link points to the correct file and location."
I'm running on sap basis 7.02 SP13 and implemented the notes 1975765 and 1985288 but not resolved this issue.
Do you have any ideas?
Thank you.

Hi Jorge,
Are you able to download the ICONs from alv table? try to use some icon source '~Icon/Add' and check out if you can download it to excel successfully.
FYR:
Regards,
Rama

Problem in developing webdynpro ABAP ?

Hi all,
I have a problem in execution of my first webdynpro ABAP application.
I did my program based on the instructions given in the given link.
http://www.octavia.de/fileadmin/octavia_files/content_bilder/Hauptnavigation/SAP_NetWeaver/WebDynpro/Web_Dynpro_Part_I.pdf
In doing that program i didn't get any errors,
but while executing its giving error that http:500 internal error.
If any body know how to resolve this issue .
Plz help me in this issue.
Thanks

Error when processing your request
What has happened?
The URL http://sapserver:8001/sap/bc/webdynpro/sap/zwd_hellosr was not called due to an error.
Note
     The following error text was processed in the system DM0 : Die URL enthält keine vollständige Domainangabe (sapserver statt sapserver.).
     The error occurred on the application server sapserver_DM0_01 and in the work process 0 .
     The termination type was: RABAX_STATE
     The ABAP call stack was:
Method: CHECK of program CX_FQDN=======================CP
Method: LATE_CONSTRUCTOR of program CL_WDR_UCF====================CP
Method: HANDLE_REQUEST of program CL_WDR_UCF====================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
What can I do?
     If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system DM0 in transaction ST22.
     If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server sapserver_DM0_01 in transaction SM21.
     If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server sapserver_DM0_01 . In some situations, you may also need to analyze the trace files of other work processes.
     If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 800 -u: NEELIMAK -l: E -s: DM0 -i: sapserver_DM0_01 -w: 0 -d: 20101207 -t: 130320 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team

DMS Document not getting created thru Webdynpro ABAP Strange Problem

Dear all,
My requirement is that I have a Webdynpro ABAP application sitting on SAP Server1 and I am having a FileUploadUI Element in there for uploading files and we have SAP Server2 with the DMS configured. So, what we have done is we have an RFC in SAP Server2 and we are calling it from our webdynpro ABAP application sitting on SAP Server1. And we are calling BAPI_Create2 with all the necessary parameters in this RFC to create the DMS document with the file from webdynpro ABAP application. But its not working. I am passing the Presentation Server File Path of the File to the BAPI_create2.Even if I write the file to the application server of SAP Server2 and then pass this file path to the BAPI_Create2 then also it doesn't work but when I execute this RFC locally in the SAP Server2 with the presentation server file path It executes successfully.
I don't know what I am missing.
Please help.
Thanks and regards,
--Sonal

Dear Thomas,
Suppose I have got the file copied to the application server in SAP Server2 using datasets from WDA in SAP server1.
Now I have an RFC say ZFILE_UPLOAD in SAP Server2 for which we have made an SAP ABAP RFC Connection from SAP Server1. In this RFC I am calling BAPI_create2 using the application server filepath(of SAP Server2) in docfile parameter along with ur suggested destination then also it doesn't work. Gives an error that "error in storing and checking file" i.e. Error 253.
One more query how to handle the file upload of different file types say I am uploading a pdf file from my webdynpro abap application in SAP server1. Then I get the xstring and pass it to ZFILE_UPLOAD and convert it into binary and write it there in SAP Server2 using datasets. Is it possible to upload any kind of file and then creating the DMS document out of it?
and how to call this RFC?
Thanksn and regards,
--Sonal

Debugging is not working in R/3 from WebDynpro-ABAP developed webpage input

Dear Friends,
We are facing a serious problem for debugging. Expecting valuable input for the same.
Debugging is not working in R/3 from WebDynpro-ABAP developed webpage input in Production Server.
The debugging (for WebDynpro-ABAP application) is working in Dev. Server for
1st ] Within R/3
Ex. debug for bapi within R/3. i.e. value enter as input in R/3 only.
2nd ] From webpage to R/3
Ex. Some input given on the internet web page developed through WebDynpro and external breakpoint set in R/3 it works. It directs to R/3 code through debugging.
In Prod. Server the 1st case above is working but the 2nd case is not working.
In Prod. Server the WebDynpro developed applications are running successfully through internet explorer webpage inputs. So running the application is not a problem in prod. Server but debugging of the same is the problem.
The setting which are done in Prod. server are,
1] RZ10 in parameters are set for port and host name.
2.1] In SMICM check for ICM.
2.2] Host file updated in Windows-System 32.
3] In SICF following services are active,
3.1] default_host/sap/bc/webdynpro
3.2] default_host/sap/public/bc
3.3] default_host/sap/public/bc/webdynpro/viewdesigner
3.4] default_host/sap/bc/wdvd
3.5] default_host/sap/public/icman
3.6] default_host/sap/bc/gui/sap/its/webgui
3.7] default_host/sap/public/ping
3.8] default_host/sap/bc/error
3.9] default_host/sap/bc/echo
4] In SE80
4.1] Internet services-System-are published
4.2] Internet services-WEBGUI-are published
4.3] Utilities-Setting-ABAP Editor-Debugging-Username & New Debugger set.
4.4] Utilities-Setting-ABAP Editor-Editor-Front-End Editor(New) set.
5] In Su01 for user profiles sap_all & sap_new is assigned and role SAP_BC_WEBSERVICE_DEBUGGER is assigned.
6] The support packages are also updated to latest level.
7] Gone through following links but not getting any clues.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/74d50bd1431b5ae10000000a42189c/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/EN/77/3545415ea6f523e10000000a155106/frameset.htm
Thanks in Advance.
Best Regards,
Abhijit.

No cross posting
Read the "Rules of Engagament"
Regards
Juan

Error when Interative Adobe Form is called from Webdynpro ABAP.

Hi Experts,
I trying to call a Interactive adobe form from ABAP Webdynpro application but I am facing the below error.
Line: -
The following error text was processed in the system GJD : User session (HTTP/SMTP/..) closed after timeout
The error occurred on the application server az18u021_GJD_01 and in the work process 0 .
The termination type was: ERROR_MESSAGE_STATE
The ABAP call stack was:
Method: PREPROCESS_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
Line: -
When I uncheck the enabled property of the Interactive From in the Page of the WebDynpro I am able to execute the application successfully.But the Adobe form behaves as a Static Form when I uncheck the enabled property.
So kindly provide your valuable suggestions to avoid the above error when I am calling a Interactive adobe form from Webdynpro ABAP.
Thanks in Advance.
Regards,
Arun.

Hello,
Hello, are you sure you have your ADS credentials configured correctly and valid? I guess you know that is the only difference between clicking enabled on true or false. If you are not sure, you can use SE38, search for FP_* and pick some reports to check the licencing. The names of the reports are good enough to recognize the right one.
Or maybe that is a security problem? Have you checked the ADS_ERROR string? Did you use the ADS trace?
check: http://help.sap.com/saphelp_nw70/helpdata/en/2c/241a427ff6db2ce10000000a1550b0/content.htm
and especially note 999998
Regards, Otto

Error in opening webdynpro abap application

hi All,
I am facing below issue in opening webdynpro abap application, this is first WDA application in production system, please help me in resolving this issue.
============================================================================
Error when processing your request
What has happened?
The URL http://grp.mysap.pg.com:9500/sap/bc/webdynpro/sap/zgpuvstapp/~ucfLOADING was not called due to an error.
Note
The following error text was processed in the system GRP : A request for server adln5412 has been sent to server adln5411; see Note 1364846
The error occurred on the application server adln5411_GRP_10 and in the work process 3 .
The termination type was: ERROR_MESSAGE_STATE
The ABAP call stack was:
Method: PREPROCESS_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system GRP in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server adln5411_GRP_10 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 3 in transaction ST11 on the application server adln5411_GRP_10 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 400 -u: BS6402 -l: E -s: GRP -i: adln5411_GRP_10 -w: 3 -d: 20100929 -t: 140306 -v: ERROR_MESSAGE_STATE -e: A request for server adln5412 has been sent to server adln5411; see Note 1364846
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
============================================================================
Edited by: brahmanandam ausali on Sep 30, 2010 4:11 AM

Hi Shibli,
I'm facing the same issue with the POWL only if called from a part of the network outside our country (Italy) so I think it would be a network configuration problem as you suppose. Can you explain us the configuration of the balancer and dispatcher to solve the issue?
Thanks
Mattia

How to insert the image or logo into the table as a field in webdynpro abap

Hi Friends,
Please tell me how to insert the image or logo into the table as a field in webdynpro abap.........

Hi Alagappan ,
In your view layout you take table UI element and then you bind it with some context nodes.
The attributes of your nodes comes as a field.
Now in these fields you can set various properties and image is one of them.
Go to ->
1. View Layout -> Right Click on ROOTUIELEMENTCONTAINER -> INSERT ELEMENT -> TABLE
2. Right click on table -> Create Binding.
Here you have to bind it with the appropriate context node.
You will get two properties here
a- Standard Cell Editor :- ( make it image )
b- Standard properties :- ( If required set image properties ).
3. If you want put image from out side then import it as a mime object and set the source of your table field ( used as a image )
also have a look :-
[Image Properties|http://help.sap.com/saphelp_nw04/helpdata/en/f3/1a61a9dc7f2e4199458e964e76b4ba/content.htm]
Hope this will solve your problem.
Reply if any case of any issue.
Thanks & Regards,
Monishankar C

I was gettiing runtime error while executing a Webdynpro-ABAP application

Hi,
I am working on Webdynpro-ABAP and created a ALV report using Service call BAPI method in IDES version. After creating component and designed view and created Webdynpro application. While executing application I am getting some error in explorer.
For any application I am getting same error.
I think some setting in explorer..I am not sure. If yes how can I rectify ?
waiting for quick response.
I am giving details error below what I faced.
Error when processing your request
What has happened?
The URL http://sapserver:8001/sap/bc/webdynpro/sap/zz_00_bapiflight was not called due to an error.
Note
     The following error text was processed in the system DM0 : Die URL enthält keine vollständige Domainangabe (sapserver statt sapserver.).
     The error occurred on the application server sapserver_DM0_01 and in the work process 0 .
     The termination type was: RABAX_STATE
     The ABAP call stack was:
Method: CHECK of program CX_FQDN=======================CP
Method: LATE_CONSTRUCTOR of program CL_WDR_UCF====================CP
Method: HANDLE_REQUEST of program CL_WDR_UCF====================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
What can I do?
     If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system DM0 in transaction ST22.
     If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server sapserver_DM0_01 in transaction SM21.
     If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server sapserver_DM0_01 . In some situations, you may also need to analyze the trace files of other work processes.
     If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 800 -u: SAPUSER -l: E -s: DM0 -i: sapserver_DM0_01 -w: 0 -d: 20091226 -t: 135942 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Best Regards,
BDP

hi
It is the Fully Qualified Domain Name (FQDN) error . Refer SAP online help :
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/67/be9442572e1231e10000000a1550b0/frameset.htm
refer the similar thread :
Problem executing sample Webdynpro application
regards,
amit

Webservice in Webdynpro ABAP

Hi
Please provide tutorial and general guidelines for settings for consuming webservice in webdynpro ABAP.
Thanks & Regards,
Chaitali

Thanks Rich for quick answer.
But my problem is, I have a stand alone WAS without any RFC Function modules and dictionary structures, of backend R/3, on WAS which I wanted to map in my component.
I strongly believe that in case of stand alone WAS I need to have at least backend dictionary structures to begin with my design. I cant use wizard, as I dont have function modules on this system. I have to code for that manually..
So that is why, I was looking for Webservice option..
Thanks,
Nitesh Shelar.

Calling Portal iView from a WebdynPro ABAP application

Hi ,
I have a requirement where I need to call an iView in my portal from the Webdynpro application also existing in the portal.
Can anyone provide me the method with source code( if possible ) to call an iView existing in the portal from the WebDynPro ABAP application.
Best Regards
Sid

Hi Siddharth,
Well, I think you can go for Portal Navigation concept.
Please check the required source code in WDR_TEST_PORTAL_NAV Web Dynpro component. That will illustrate both Page based Navigation and Object based Navigation.
Hope that should solve your problem.
Regards
<i><b>Raja Sekhar</b></i>

How to Call the RFC in Webdynpro abap application

Dear Experts,
Good Evening to all...
I have to add two numbers using RFC in webdynpro abap application. If we give the numbers in the input screen then the RFC should add it and give it in the output screen. This is the application for that I have created the RFC.
But the problem is i don't know how to call the RFC in that Webdynpro abap application and how to link the input view and output view with that RFC...? I am new to Webdynpro abap. Please kindly help me on this... I am struggled here... I need your help in this....
Thank You.

Hi Jaga,
You asked the same question again.
Without closing the [previous one|Re: Where SAP store the uploaded files?].
I think Abhi has answered your question.
If not please elaborate on the problem.
The solution btw is to create a Service Call.
Sumit

Default Values for Select-options In Webdynpro-ABAP

Hi Freinds,
Kindly,Help me in setting the Default values for the Select-options in Webdynpro ABAP.
Here the Node and the Attributes are Created Dynamically, and then Displayed Select-options Component View.
Regards,
Xavier.P

Xavier Reddy Penta sent me this question via email and I answered it directly yesterday. Here is the solution that I provided to him, so that it is stored with the original question:
I believe your problem is that you are not setting the value into the range correctly. You are setting it directly into the field symbol of the range like such:
<FS> = L_STRING2.
But ranges are deep objects. They have four fields: Sign, Option, High, and Low. This is from the online help:
1.     sign of type c and length 1. The content of sign determines for every row whether the result of the condition formulated in the column is included or excluded in the entire resulting set for all rows. Evaluable values are "I" for include and "E" for exclude.
2.     option of type c and length 2. option contains the selection option for the condition of the row in form of logical operators. Analyzable operators are "EQ", "NE", "GE", "GT", "LE", "LT", "CP" and "NP" if column high is initial, and "BT", "NB" if column high is not initial. With the options "CP" and "NP", the data type of the columns low and high must be of the data type c, and special rules apply for entries on the selection screen.
3.     low of the data type defined after FOR. This column is designated for the comparison value or the lower interval limitation.
4.     high of the data type defined after FOR. This column is designated for the upper interval limitation.
So when you are moving the value into the field symbol you are setting it into the sign column.
Here is an example of how you can access the components of the range:
* create a range table that consists of this new data element
    lt_range_table =
      wd_this->lv_sel_handler->create_range_table(
           i_typename = l_typename ).
    IF l_fieldname = 'CARRID'.
      FIELD-SYMBOLS: <tab>         TYPE INDEX TABLE,
                         <struct>      TYPE ANY,
                         <wa>          TYPE ANY,
                         <option>      TYPE char2,
                         <sign>        TYPE char1,
                         <high>        TYPE ANY,
                         <low>         TYPE ANY,
                         <wa_values>   TYPE ANY.
      ASSIGN lt_range_table->* TO <tab>.
      APPEND INITIAL LINE TO <tab> ASSIGNING <wa>.
      ASSIGN COMPONENT 'OPTION' OF STRUCTURE <wa> TO <option>.
      ASSIGN COMPONENT 'HIGH' OF STRUCTURE <wa> TO <high>.
      ASSIGN COMPONENT 'LOW' OF STRUCTURE <wa> TO <low>.
      ASSIGN COMPONENT 'SIGN' OF STRUCTURE <wa> TO <sign>.
      <sign> = 'I'.
      <option> = 'EQ'.
      <low> = 'AA'.
    ENDIF.

Filling dynamic drop down in adobe interactive form( webdynpro ABAP)

HI all,
Im new in Webdynpro ABAP, my requirement is to fill drop down list in adobe interactive form. i created adobe form and its working fine.
I Created context like ROOT(cardinality 1:1)->DATANODE cardinality 0:n. This context is for drop down and in wddoinit i did like this.
IN WDDOINIT ,
DATA lo_nd_root TYPE REF TO if_wd_context_node.
DATA lo_nd_datanode TYPE REF TO if_wd_context_node.
DATA lo_el_datanode TYPE REF TO if_wd_context_element.
DATA ls_datanode TYPE wd_this->elements_datanode.
navigate from <CONTEXT> to <ROOT> via lead selection
lo_nd_root = wd_context->get_child_node( name = wd_this->wdctx_root ).
navigate from <ROOT> to <DATANODE> via lead selection
lo_nd_datanode = lo_nd_root->get_child_node( name = wd_this->wdctx_datanode ).
get element via lead selection
lo_el_datanode = lo_nd_datanode->get_element( ).
ls_datanode[] = lt_dna_value[].
CALL METHOD lo_nd_datanode->bind_table
EXPORTING
    new_items            = ls_datanode
    set_initial_elements = ABAP_TRUE.
   index                =
while executing i'm getting this error ": WebDynpro Exception: ADS: com.adobe.ProcessingException: No output was generated while rendering: Stream for: PDFOut.(200,101). " . can u please tell me how to bind value for drop down.
I created sample table in same form and i binded same value to table, that time its executing fine.
can u please tell me solution for this Scenario.
Thanks
Hemachandran.
Edited by: hemachandran R on Sep 12, 2008 2:27 PM

hi,
My requirement, is to use dynamic drop down in dynamic table. I am using webdynpro abap.
i populated the value in drop down.
Its working fine but the problem is how to fill the default value in drop down. because i want to bind the default value which im getting specify value from the table.because each row
im getting different values, like first row
CAR
, that CAR want to fill as a default value in drop down and second row as
BIKE
that BIKE want to fill as default value in drop down ( example drop down contain   car , bike , cycle).
In adobe form i binded like this
$record.DATANODE.DATA[*].DNA_RATING
i dont know whether this one is correct or wrong .
im getting default value as empty.
please give me some solution how to do this.its very urgent
thanks
hemachandran.

ECatt Webdynpro ABAP problems

Similar Messages

Maybe you are looking for