ECC 6.0 Script Error - Text elements
Dear All,
I'm facing an error in the script saying that:
Error log
F0 251 In form XXX / window MAIN , the element 510-C (Text-C) is missing
F0 251 In form XXX / window MAIN , the element 515 (Heading) is missing
F0 251 In form XXX/ window MAIN , the element 520 (Carry forward above) is missing
F0 251 In form XXX / window MAIN , the element 525 (Line items) is missing
F0 251 In form XXX / window MAIN , the element 530 (Total) is missing
F0 252 In form XXX , window SUMMARY is missing
F0 253 Output of the relevant forms is defective
I have checked the forum with the similar issue but no solved results.
Can anyone sort this out ?
Regards,
Deepu.K
Hi ,
I have checked the forum with the similar issue but no solved results.
You have not searched the SDN forum ....
check below link
[Cheque Printing error |Cheque Printing error;
regards
Deepak.
Similar Messages
-
Calling Script without Text element
Hi All
Can we call script without using text element in driver program.
Ex: in write_form without writing text element only passing window name
Thanks in Advance
Regards
Sujihello
NO, you can not use write_form without TEXT element name .
Regards
Geeta Gupta -
Dump error when clicked on text elements in SAP Script window
Hi All,
There is an inclusion in SAP Script. I have written the code in driver program. I need to pass the value to SAP Script in the requested position. But when I go to SE71 > Form Name > Change or Display > MAIN Window > Text Elements > I get a dump error.
Category ABAP Programming Error
Runtime Errors DATA_LENGTH_TOO_LARGE
Except. CX_SY_RANGE_OUT_OF_BOUNDS
ABAP Program SAPLSTXK
Application Component BC-SRV-SCR
Date and Time 30.04.2014 20:00:08
Short text
Invalid partial field access: Length is too large
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSTXK" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_RANGE_OUT_OF_BOUNDS', was not
caught in
procedure "TOKEN_COMMENT" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
In the executed program "SAPLSTXK", the system attempted to access the field
"ITF_TOKEN" of the type "C" and with the length 255 using the length 272.
However, a partial field access with a length specification that is
larger than the field length is not allowed.
How to correct the error
Reduce the length used to access the field.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DATA_LENGTH_TOO_LARGE" "CX_SY_RANGE_OUT_OF_BOUNDS"
"SAPLSTXK" or "LSTXKFRN"
"TOKEN_COMMENT"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
2937 * todo empty comment ???
2938 if g_tm_open eq true or " Section
2939 g_tm_b_close eq true.
2940 l_token = '\chcbpat0'.
2941 l_len = strlen( l_token ).
2942 token_control = true.
2943 assign l_token to <itf1>.
2944 perform put_itf1_new using l_len.
2945 perform token_line_begin changing l_next_token.
2946 else. " without section
2947 concatenate '\chcbpat0\line' g_cf_string l_cbpat_token into l_token.
2948 l_len = strlen( l_token ).
2949 token_control = true.
2950 assign l_token to <itf1>.
2951 perform put_itf1_new using l_len.
2952 endif.
2953 elseif l_next_token-code eq ')L'. " \par
2954 l_token = '\par'.
2955 l_len = strlen( l_token ).
2956 token_control = true.
2957 assign l_token to <itf1>.
2958 perform put_itf1_new using l_len.
2959 elseif l_next_token-code eq '(C' or " \par + format
2960 l_next_token-code eq ')C' or
2961 l_next_token-code eq '(&' or
2962 l_next_token-code eq 'TA' or
2963 l_next_token-code eq 'SC' or
2964 l_next_token-code eq 'ST'.
2965 concatenate '\chcbpat0\par' g_pf_string g_cf_string l_cbpat_token into l_token.
2966 l_len = strlen( l_token ).
>>>>> itf_token(l_len) = l_token.
2968 token_control = true.
2969 assign l_token to <itf1>.
2970 perform put_itf1_new using l_len.
2971 endif.
2972
2973 * Step 7: (L to disarm
2974 if g_compose eq true and
2975 l_next_token-code eq '(L'.
2976 perform read_next_itf_token(rstxscan) using p_token.
2977 endif.
2978
2979 ENDFORM. " token_comment
2980 *&---------------------------------------------------------------------*
2981 *& Form create_lang_info
2982 *&---------------------------------------------------------------------*
2983 * add default language to rtf
2984 *----------------------------------------------------------------------*
2985 * -->P_HEADER text
2986 * <--P_RESULT text
How do I open the text elements? I need to pass the variable inside SAP Script.
Please Help. The requirement is pending from very long. Not able to rectify this issue.
Regards,
RekhaHi,
There is a SAP Note about this problem
566794 - Runtime error: STRING_OFFSET_TOO_LARGE during conversion
Correction Instructions
Correction Instructions
Software Component
Valid from
Valid to
Number
SAP_BASIS
46B
46D
473267
SAP_BASIS
610
620
473185
Support Packages & Patches
Support Packages
Software Component
Release
Support Package
SAP_BASIS
46B
SAPKB46B48
46C
SAPKB46C39
46D
SAPKB46D28
610
SAPKB61027
620
SAPKB62014
Regards
Miguel -
Text Element error in SAP script
Hi All,
I have modified a sap script and now getting print perfectly without any flaws.
But system is raising an error log in spool (Tcode: SP01) as below..
In form ZFFIAP_PMNT_RMTT / window MAIN , the element 610-C (Text-C) is missing.
When i checked the MAIN window of sap script, there is a text element with name 610-C.
How to resolve this error..????
Please Help me...
Regards
PavanThanks for your inputs.
I have checked the Driver Program. There is no text element '610-C' used in WRITE_FORM statements in the driver code.
There is no such element in the MAIN Window of sap script.
Still i m facing same error.....
"In form ZFFIAP_PMNT_RMTT / window MAIN , the element 610-C (Text-C) is missing"...
What might be the reason..????
I have checked other window too for such text element...
If i create a text element "610-C" in the MAIN window of sap script, still same error is being created as log file in Spool (SP01). INterestingly this error is not creating any impact on script printing...!!!
Can anyone help me.....????
Regards
Pavan -
Error in script : text elements are missing
Hi ,
In my print programs iam uaing lots of text elements for a
zform. I have copied the zform into zform1 and using the same print program and modified the zform1 according to my needs.
I am not using all the text elements in my zform1 script which is passed from the print program.
When i execute my zform1 by using the transaction which inturn uses that print program it gives more messages saying 512, 513 , 515 text elements are missing in form Zform1.
Can anyone tell without touching the print program can i do anything on the script zform1 to reslove this problem.
Please help me on this.Thanks...
Regards,
Rose.Hi,
Ya, whatever Narendra told is right. U nedd to have the text elements in the script if you are calling the same from print program. Just maitain all the text elements with no text it.
Eg:
/: 513
/: 515
Regards,
KK -
ABAP Webdynpro Development - Script Error when Accessing Visual Elements
I am encountering a strange error at my client . I can't use the Abap Webdynpro visual elements to build views .
To reproduce the error :
- T-code SE80
- Open up any ABAP webdynpro component .
- Open up one of the view and go on Tab Layout .
Normal Screen : You would see many WYSIWYG items ( buttons, radiobutton , text elements etcu2026. ) at the left side u2026 these elements are used to build the view .
Here : No elements displayed and when we click on that area we get an error .
Instead of the elements to get displayed .. lines are displayed and when you try to open up ( click ) the lines , an internet explorer script error stating the following occurs ( although the abap wendynpro is edited in SAP Gui ) :
An Error has occured in the script on this page .
Line : 1
Char : 25
Error : Object Required
Code: 0
URL : http://hdrerpdev05.bchydro.bc.ca:8100/sap/bc/wdvd/toolbar.html?_vdrespkey=4KE8FGJO3P88DO8K5XCEYHTEA&_vdframe=toolbar&usedynp=&usepat=&sap-client=100
Anybody had had the same kind of error before ^^????
Thanks and Best Regards !Hi,
we are getting the some what related errors in SE80 -> Web Dynpro Layout
An Error has occured in the script on this page .
Line : 1
Char : 1
Error : Object Expected
Code: 0
URL : http://<FQDN>:8000/sap/bc/wdvd/painting.html?_vdrespkey=4KZ4LYLFQA2I7X53H3CRICKFC&_vdframe=painting&sap-client=230
An Error has occured in the script on this page .
Line : 110
Char : 2
Error : Could not complete the operation due to error 80020101
Code: 0
URL : http://<FQDN>:8000/sap/bc/wdvd?_vdrespkey=4KZ4LYLFQA2I7X53H3CRICKFC&_vdframe=no_add_ui_lib&sap-client=230
Recently, we have upgraded our ERP system (SAP ECC 6.0 SPS17) with EHP4 SPS8. SAP_BASIS and SAP_ABA patch level same on 701_0008.
FQDN is mantianed at icm/host_name_full parameter in system as well as in /etc/hosts file with associated system IP address.
As suggested by Ted Dinh, we do not find any duplicate MIME files in our MIME Repository (SE80) and we cleared/invalidated ICM cache many times in problem analysis.
As suggested by Thierno Diarra , in our affected system domain WDY_MD_UI_ELEMENT_CATEGORY is well maintained in value ranges.
We have raised SAP OSS Message for the same, they told us to check dns server connectivity/settings with the affected system. we did the suggested DNS settings in affected system. But still the same error message is occuring. They have suggested same sap notes like #979039 and #1009930 & #1483210 , but all the corrections/suggections/SICF service status as mentioned, are found OK in our system.
Regards,
Bhavik G. Shroff -
How do I Hide the text printed from a standard Text Element in SAP Script?
Hi,
I have created one SAP Script which gets printed from IW33 using a standard print program.
In config the standrad SAP script is replaced by the zsap script.
Since the Zscript is printed from a Standard print program, I had to keep all the text elements used by the original(standard) SAP script.
I only kept the text elemets and commented out the printing part.
But still some values are printing. How do I hide these text element values?
I want to delete whatever its printing from these text element. Icant delete the standard text elemetns , otherwise the standard print program will give error.Hi,
I am not printing any text under these text element in my zscript.
I had to include these standard text elemets as they are called from the standard print program using which my zscript is getting printed.
for example:
/E OPERATION
Under operation i didnot print anything. Still some values which are passed in text element Operation by the print program is being printed in the form. i want to hide/delete these values.
how do I do that? -
Hi what does ZKWERT(I5.1) mean in a text element in scripts, that is it has the letter I in the bracket.
this is used in scripts. What will be its equivalent in smartforms.
Smartforms throw a synatx error for the same formatting
JohnHi!
It is a formatting option. Check out this link.
http://help.sap.com/saphelp_47x200/helpdata/en/d1/803411454211d189710000e8322d00/content.htm
I means "Suppressing Output of Initial Values"
Regards
Tamás
Message was edited by:
Tamás Nyisztor -
How to color the text elements in script?
how to color the text elements in script?
byeeeee
plz send the answersHi,
Please go through my blog to know how to do color printing in SAP scripts.
White Paper on 'Color Printing in SAP Scripts'
Regards,
Sireesha Ch -
How to end text element in sap script
how to end an text element in sap script
this is the format.
/E text element name
&tablename-fieldname&
text-text-text-text
now if i do not end that text element it is not displayiny my below text , so what to do in this caseGo through the links mentioned below.
http://www.****************/Tutorials/Smartforms/SFMain.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3c5d9ae3-0501-0010-0090-bdfb2d458985
http://www.sapmaterial.com/smartform_example.html
Re: Hands on SAP Smart Forms
smartforms
Reward points if useful. -
Error message TD427 (A text element is not defined for form J_1IEWT_CERT)
Hello,
Q> I assign the SAP script form J_1IEWT_CERT to 'SPRO=>Withholding Tax Certificates for Vendor and Customers' and was trying to see the print preveiw. But once I press printpreview button error comes "ELEMENT TITLEDET WINDOW TITLEDET IS NOT DEFINED FOR FORM J_1IEWT_CERT" and i can't see the printprview.
Same thing I tried with the copy of J_1IEWT_CERT from 000 client to ZJ_1IEWT_CERT; but same error is coming.
If i try the printpreview through SE71 it shows without error.
Thank You."test printing" via SE71 only prints what exists in the form. Here your form is missing TITLEDET window and element.
The print program tries to print TITLEDET but it does not exist. Could you check SAP notes to get correct versions of print program and sapscript form. -
Creation of Text Element in Custom Script for MEDRUCK
hi,
i have a problem in the scripts, the script is customized one but driver program is standard one.
few text element which are in the page windows but not appering in the output, how can we make them to appear in the output.
can we add new text element without modifying driver program in script,
can any one suggest me any thing for solving this problem.
thanks in advance.hi,
i havent found any write_form function call in the standard driver program.i think is it is system generated driver program for MEDRUCK.
in my custom form few text elements are defined alredy but they are not appearing in the output, i tried by putting some hardcoded text in those text elements but it doesnt worked.
what might be the reason.
can any one know about this help me solving this problem.
thanks in advance
regards,
pavan -
Can anybody tell me how many text elements are there in sap scripts?
hi all,
can anybody tell me how many text elements are there in sap scripts?Hi,
Do you mean that you want to know how many Text-elements are there in a specific Script or you want to know how many max Text-Elements a script can have?
I believe there is no limit on this......
To know all the Text Elements in a Script......goto SE71....press F4 Help on Script Name....Choose Last option for Custom developed Scripts.....and you can open the complete Script details & Code in a Line Editor...After that you can serach/look for the text elements -
Error Message "Text Element definition is not valid"
Hi , on trying to display workflow in pftc_dis or spdd , I am getting the eror "Text element definition is not valid".
On debugging further , I found that the method cl_swf_cnt_factory=>create_swd_task_container does not return the workflow container elements i.e. the value passed to the parameter ex_task_container of the above method returned is blank.
However the same method returns the values for the workflow which is getting displayed correctly.
We have done an upgrade from 4.6B to ECC6.
Please let me know what could be the reason behind it and is there any note to overcome it or do we need to retransport it again.
Thanks and Regards,
Amanat first, the error you are getting is from the method, just check after upgrade if there is any change in the method. and see why it doesnt return the value.
also check the binding properly from workflow to method.
there is no oss notes for the same, i would require more info abt the workflow whether a standard or custome.
In case of custome if the method returns possible null value, then create a custom method and call this method inside and handle the return appropriately so that the workflow always expect a value back.
I beleive since workflow is expecting a value and it is unable to get values at times is causing this error.
Regards,
Raj -
Text Element in SAP-Script and Box
Hi Gurus
Q1.what is the meaning of text element's in sap-script.e.g.
/E INSPECTION_STATION_INFO
/E SAMPLE_INFO
/E PHYS_SAMPLES_HEADLINE..
I have to use these elements in my script.i am not able to understand what does it mean?
Q2.how we can draw a Tabular format in Script?
Q3.How we can draw Box?
Thanks in advanceHi,
Text Elements
You can define text elements (window texts) for each window. On the Form: Request screen, choose Edit ® Text elements.
The print program accesses text elements by name, formats them and prints them in the respective window. That is, the program can decide which text elements should be printed in a particular window. It calls these text elements by name to print them. You must therefore change text element names in the print program if you make any changes to text element names in a form.
In the layout of a text element, you can use only the paragraph and character formats defined in the form.
Example of a text element in an order confirmation:
/E ITEM_LINE
IL &VBDPA-POSNR&,,&VBDPA-MATNR&,,&VBDPA-ARKTX&
/ &'Customerarticlenumber 'VBDPA-IDNKD' '&&'Position
/ 'VBDPA-POSEX&
This example shows a section of a main window of a form, with an item line of an order confirmation. The /E in the tag column is used to identify the text as a text element, ITEM_LINE is the name of the text element.
Default Text Element
At the start of a window, you can define a text element without the /E command in the paragraph format column. This text is always printed at the start of the window. It is not necessary to insert this text explicitly via a print program.
For more go to this link: Character formats and attributes
http://help.sap.com/saphelp_47x200/helpdata/en/d1/80318f454211d189710000e8322d00/frameset.htm
Boxes:
Use the following code
/: BOX XPOS 1 MM YPOS 2 MM WIDTH 20 MM HEIGHT 40 MM FRAME 10 TW.
Box is the command used for printing box in script.
XPOS - x- axis position
ypos - y axis position
http://help.sap.com/saphelp_470/helpdata/en/d1/802ec5454211d189710000e8322d00/content.htm
Regards,
Omkaram.
Maybe you are looking for
-
Can anyone confirm if FaceTime is working in Oman ?
I have an ipad2 bought in USA and am presently in muscat, oman. Can anyone confirm if FaceTime can be used in oman on omantel wifi network ? The moment I dial a contact for FaceTime it says connecting after some time it says connection lost and I can
-
PI 730 - XI Content for SAP BASIS
Dear Support, When I searched the SAP Marketplace for "PI 730 - XI Content for SAP BASIS", I have found the files which has .SCA extension instead of .tpz or .zip file extension. Am I looking into a wrong directry if so, could you please help me in p
-
Adobe Premiere Elements 8 question
Hi, I have a problem I have not found the answer to. I have used my program for over a year now and I just love it, and have not had one bit of problems. All of a sudden it has stopped working the same way. I am trying to create a movie on DVD and w
-
System crashed reinstalled and lost alll my bookmarks. Are they somewhere
Can I get back my booksmarks that existed before system restored to factory setting? I did not know I had to save. Thought they where in space somewhere with emails.
-
toolbar not showing