ECC 6.0 upgrade documents / notes!

Hi All,
After upgrading to ECC 6.0 from 4.7, we are facing some errors in FA.  Can anyone help me with some document / notes on such upgrades (relating to FA)?
Thanks
Muru

hi
check out this link
https://websmp104.sap-ag.de/upgrade-erp
also check the Upgrade Installation Guide.

Similar Messages

  • Screens not working in ECC 6 after upgradation from 4.6c.

    Hi,
    The custom developed screens which where developed in 4.6c version is not working properly in ECC 6 after upgradation.Do i have to make any more changes for this .? If anyone have an idea please help me in this issue.The custom developed things are an extended functionality we have done to r/3.
    Regards,
    jinesh kumar c.

    Hi,
    Check the Transportatation Logs in STMS for the programs/screens and check whether they are successfully tranported or not?
    Because some times we get Dynpro errors for transportation of the screens.
    Reward if useful.
    regards,
    Anji

  • Open Dataset for input in BINARY MODE not working after ECC 6.0 upgrade

    Hi All,
    Our requirement is to download an XML file from the application server and there is a customized program to download these files.
    This program uses the statement,  Open dataset ...for input in BINARY MODE
    and it works perfect for 4.7. There were no issues. But, after the upgrade to ECC 6.0 this does not work.
    When the data is read in ECC 6.0 , it is shown in some special characters and it could not be opened with XML editor and the file is not completely downloaded. I read through the forum and tried the following statement as well,
    Open dataset....for input in LEGACY BINARY MODE.
    After this statement, there were no special characters, but there is a blank space introduced before every character.
    Example : TEST(actual)
                      T E S T (After the legacy binary mode)
    Could you please let me know if there is any solution to rectify this problem. Appreciate your help.
    Thanks a million.
    Edited by: Manikd on May 12, 2011 3:52 PM

    But this program was already using BINARY MODE and after upgrade this is not working. I know, it may work in TEXT MODE. However, I cannot change the whole program to TEXT mode now.

  • 4.6 C to ECC 6.0 Upgrade Project Timeline Sheet in MPP format

    Dear all,
    We are now proposing our customer for the 4.6c to ECC 6.0 Upgrade.
    Our customer is currently in 4.6c/oracle 9i/HPUX 11 i. He wants to move to ECC 6.0.
    If you have the project timeline for the above Technical Upgrade, can you pl send it to me.
    If you don't have in MPP format atleast send me the Work Breakdown structure with timelines.
    I shall modity the same to our customer and submit
    Thanks & Regards
    Senthil
    [email protected]

    Preparation Phase* 6 days
    Kick Off Meeting 1 day
    Upgrade Project Procedures Preparation 1 day
    Prepare Upgrade Project Plan 1 day
    Technical Requirements Assessment 3 days
    Assess Training needs of Key-users & End-users 1 day
    Prepare Detailed Basis Activity List for DEV, QA & PRD 1 day
    Business Blueprint Phase 6 days
    Develop System Landscape Upgrade Plan 1 day
    Functional Requirement Checklist 1 day
    ABAP Development check list 1 day
    Develop detailed Training Procedures & Documentation for Key Users & End Users 1 day
    Identify Testing Scope & Scenarios 1 day
    Identify Authorizations Conversion to Roles for SAP ECC 6.0 2 days
    Develop Documents as per Basis Activity List 1 day
    Develop Authorization Matrix for Activity Groups to Roles Conversion 2 days
    Prepare Upgrade Deliverables Checklist 1 day
    Realization Phase 28 days
    Installation of Solution Manager 3.2 System 1 day
    Creation of New Development System for Upgrade Project (Homogenous System Copy - PRD) 2 days
    Upgrade to AIX & Oracle 10g, SAP ECC 6.0 on New Development Server 3 days
    Upgrade Frontend Software 4 days
    Perform SPAU & SPDD Corrections 5 days
    Perform ABAP Development & Corrections 10 days Perform Authorizations Conversions and corrections after upgrade 8 days
    Perform Upgrade Testing for each Application Module 7 days
    Perform Unit & Integration Testing 6 days
    Perform Training to Key Users & End Users (Generic & Specific) 3 days
    Upgrade to AIX, Oracle 10g, SAP ECC 6.0 on Quality System 1 day
    Homogenous System Copy of PRD to New Quality & Upgrade to AIX, Oracle 10g & SAP ECC 6.0 2 days Perform Testing in Quality System 3 days
    Testing by end users on Quality System 1 day
    Production Realization & Go-Live Phase 6 days
    Upgrade to Production System Operating System to AIX (after close of business hours - 23:00) 1 day
    Oracle Upgrade to 10g (after close of business hours - 23:00) 1 day
    SAP Release Upgrade to ECC 6.0(Downtime Minimized - Downtime occurs in non-business hours) 2 days
    User Acceptance Testing 1 day
    Production System Go-Live 1 day
    Post Go-Live Support 14 days
    Post Go-Live Support 14 days Note: This is high level plan subject to change during Business Blue Print Phase 0 days
    This is taken from a post in Ittoolbox, May be this is generic. Hope you can tailor this to meet your requirements.

  • Any Specific Guide for Ecc 5.0 upgrade to ECC 6.0 (linux/oracle)?

    Hi Gurus
    Is there any  specific guide available for the Upgrade of ECC 5.0 to ECC 6.0 from service market place.
    for the linux operating system and oracle database. or atleast , I want to know what are the mimimum checks to be done (prerequisities) in the ECC 5.0 system which need to upgrade into ECC6.0.
    Thanks in advance
    Balaji

    Hi,
    There is not an specific guide for ECC 5.0 upgrade, just the guides specific for your OS/DB combination, they can be downloaded in https://websmp204.sap-ag.de/instguides but you should use the Unix/Oracle document,

  • Idocs statsu 51 Application document not posted

    Hi All,
    We are having an issue with orders having large number of line items in which Shipping confirmation Idocs coming from warehouse are going to status 51 (Application document not posted) when we look at the status record it shows "Object requested is currently locked by user" . This issue started happening after the ECC 6.0 upgrade.
    Please advice for the same.
    Thanks

    Dear Abid,
    Did you try to search the Forum? There are lots of threads regarding this..... Please use the search option of the forum and you will get lots of material which may further enhance your knowledge.
    Check this thread....
    Object requested is currently locked
    Thanks,
    Raja

  • Windows 7 (64bit) & Office 2010 (32bit) Excel 'Document not saved' over WAN to network drive

    Hi All
    We are currently in the process of upgrading all PC's on our WAN to windows 7 across multiple locations
    I know this has been asked numerous times but nothing is working for me.
    We are experiencing the dreaded 'Document not saved' error at only some locations (5 or 6 out of 200 for all users, these sites generally have slow network connections) when trying to save to a network share back at our HQ. it creates a .tmp file and leaves
    the original document intact but without the changes, changing the name of the document in save as doesn't work. saving locally and copying to the share works. We can save locally and to other onsite network shares. It constantly happens so the document can
    never be saved to that network share.
    Always worked on XP SP3 with Office 2010.
    the files in question are around 4mb. smaller excel files with no contenct do work.
    I have tried literally everything listed on all forums and nothing seems to resolve it...I've tried
    - the hotfix - doesn't apply to my enviroment and the offending KB aren't installed.
    - the network resiliency, pivot table network resiliency and Enable simply copy for UNC registry keys
    - disabling offline folders, windows search and indexing
    - disabling SMB2 on the client
    - turning off QOS on the IP4 settings.
    - trusted documents.
    event log gives
    Log Name:      OAlerts
    Source:        Microsoft Office 14 Alerts
    Date:          28/03/2014 18:47:23
    Event ID:      300
    Task Category: None
    Level:         Information
    Keywords:      Classic
    User:          N/A
    Description:
    Microsoft Excel
    Document not saved.
    P1: 100490
    P2: 14.0.7015.1000
    P3: xsmh
    P4: 0x80070040
    and numerous other things.
    My guess is me the issue points to Excel loosing connection to the network share when saving and then the .tmp becoming corrupt.
    Does any one have any ideas? Is there a way to sure the connection when saving? is there a way to force it to stay connected?
    any help highly appreciated.
    Thanks

    Hello, We've been having this same issue, and I think we have a work-around.
    If we change HKLM\System\CurrentControlSet\services\LanmanWorkstation\Parameters\RequireSecuritySignature from "0" to "1" we still get the error message but the tmp file is NOT created. If the user tries to save again, it is then successful.

  • Accounting document not cleared when billing document is cancelled.

    Hi,
    In ECC 6.0 when we cancel a billing document through vf11 in vfo3 we find the status as accounting document not cleared.
    The general process is manually going to f-23 and clear customer line items of that invoice. After doing this the status become accounting documet is cleared.
    My requirement is how to cancel the billing document without getting this message (accounting document not cleared) and not clearing the customer line items manually.
    Can it be done through user exit/enhancement or by copying requirement vofm.
    Please suggest.
    Thanks
    Edited by: sumesh on Jul 29, 2009 6:33 PM

    They directly want the accounting document to
       be cleared when billing document is cancelled.
    Though you can achieve this with the help of ABAPer, why dont you consider having a Posting block for your billing type so that as and when the billing documents are generated, you can release it via VFX3 in bulk or VF02 for individual billing document release to FI.
    In order to achieve this, go to VOFA, select your billing type and execute.  There you can see a field "Posting block" where maintain a tick there and save.  With this control, first of all, you can ensure that before releasing F2 billing documents to FI, it is not cancelled.
    thanks
    G. Lakshmipathi

  • SAP R/3 4.6 C to ECC 6.0 Upgrade using CU &UC method- Unicode conversion

    Basis Gurus
       I am working on upgrade from R/3 4.6C to ECC 6.0.
    ECC 6.0 upgrade completed( still in non Unicode).  Now I am in the process of Unicode conversion.
    I have used following methods for the upgrade.
    1. Combined Upgrade & Unicode conversion(CU & UC)
    2. Resource minimized( as I am doing it in Sandbox).
      As I understand I need to perform the DB export and Import now for the unicode conversion.
      According to the Upgrade document, First I need to run Export using R3load in ECC6.0(Non unicode)
      and then install Unicode system and import the same data file.
      My understanding was, when I choose, Resource minimized, I need to run Export and import
      in the same system.
      Can you please help me , whether I need another Unicode system for import ??
    Graham

    Hi,
    Dont get confused with upg strategy and unicode conversion.
    In general Upgrade strategy (either downtime-minimized/resource minimized)
    In unicode conversion you have export/import(exp/imp) of data concept
    In CU&UC approach you have to do in a streach to complete migrate from old release to new realease ECC 6.00.
    Using database independent (sapinst only) or Using database dependent (migration monitor or Distribution monitor)
    It can be done in 2 ways.
    If you dont have addtional server for unicode conversion
           1)you can either do exp on same hardware and take bakup and do import using the exp dump.
           2)Do exp on one server and prepare your target empty database on another server and complete imp of data.
    Hope this is clear.
    Regards,
    Vamshi.

  • ECC-600 EHP4 upgrade with VIRSAHR 520 700 - PREP_EXTENSION/ADDON_QCALC

    Hi
    We are getting following error at phase PREP_EXTENSION/ADDON_QCALC in the ECC 6.0 upgrade:
    3 ETN256 You want to install the following add-on components:
    3 ETN248 Component: "VIRSAHR" rel. "520_700", Support Package
    level: "0" (component type "A")
    3 ETN248 Component: "VIRSANH" rel. "520_700", Support Package
    level: "0" (component type "A")
    2 ETN085X"2. Adding Add-on Installation Queue" " " " " " "
    3 ETN262 Calculating queue part for add-on "VIRSAHR" rel. "520_700"
    3 ETN490 Use the Add-On installation package "SAPK-523EXINVIRSAHR"
    (type &4"AOX") for Add-On &2"VIRSAHR" rel.&3"520_700"
    3 ETN245 The following import prerequisites of OCS Package "SAPK-
    523EXINVIRSAHR" have not been met:
    3 ETN264 In the (alternatively) Requirement set "01":
    3WETN491 Required software component "SAP_HR" rel."600" is not installed2WETN543 OCS package "SAPK-523EXINVIRSAHR" does not match the current
    software component vector
    1 ETN214X."**************************************************"
    We have alreacy checked note 1002147, which clearly states that we have to include SAPK-523EXINVIRSAHR in the upgrade. SAP_HR is part of the upgrade.
    We have included SAP_HR and other Support Package as per the queue generated by Solution Manager, but we did not include VIRSAHR & VIRSANH Packages until we got to this phase. We then included these support packages in eps\in directory, but we are now getting this error now.
    Any ideas?
    Regards
    Chandu

    Hi
    This is what the solution provided by SAP Support:
    Quote:
    we have finally found the problem, it's a bug in the package upload
    functionality used by the upgrade. The consequence of this bug is that
    Support Packages whose EPS files (.PAT files) have a certain string in
    the name, namely the string 0000000 after the _ and before .PAT
    extension, are not properly uploaded to the ABAP system and hence are
    not visible or known to the upgrade.
    This bug will be fixed in the next upgrade tool fix, but in the meantimeyou can use the following workaround:
    Check your EPS/in directory after the CAR/SAR Archives of the SPs are
    extracted and rename all .PAT and .ATT files, which have a name like
    *_0000000.PAT (or *_0000000.ATT), by changing the string 0000000 to
    9000000. For example, for the VIRSANH SP SAPK-52302INVIRSANH rename the
    file VS30020106486_0000000.PAT to VS30020106486_9000000.PAT
    Afterwards, the upgrade will upload the informations about the SP
    properly and the SP can be included into the upgrade.
    Files:
    31/01/2007 07:32 329 VS30020106486_0000000.ATT
    31/01/2007 07:32 554,073 VS30020106486_0000000.PAT
    If these two files are renamed to e.g.
    VS30020106486_9000000.ATT
    VS30020106486_9000000.PAT
    the affected VIRSANH SP2 is uploaded correctly by the upgrade
    functionality and the SP inclusion of the VIRSANH SPs works.
    Sorry, as of now I cannot promise you a date when the tool fix will be
    available. I have found this bug only today in the evening (german time)and will discuss this with the responsible colleagues tomorrow.
    Afterwards, I will know more...
    Unquote:
    Hope this helps. We have decided against upgrading to 530_700 as it will involve upgrading GRC system and also new version has lot of new functionalities, which we like explore it after the ECC upgrade.
    Also, I would not suggest deleting VIRSAHR as all the config and customising done for VIRSAHR will be lost.
    Regards
    Chandu
    Edited by: Chandu Cheeti on Jan 17, 2010 11:19 AM

  • Error in WBS Element Hierarchy load after ECC 6.0 Upgrade

    Hi All,
    After ECC 6.0 Upgrade in R/3, we are doing test load in a Test server. While doing, we have encountered an issue with 0WBS_ELEMENT Hierarchy load. The message in the monitor is like below.
    "Node ID 00014240 has not been included in the hierarchy
    Message no. RH207"
    When I run the same hierarchy in another system which is not upgraded , it works fine.
    Anybody has faced similar kind of issues and can throw some light on this issue?
    Thanks,
    Mohan

    Try activating the Heirarchy in R/3 and re-trigger the load, error is very specific to structure of the hierarchy. there is a possibility that this Hierarcy could have got inconsistent after the upgrade.
    Thanks,
    Amit

  • Posting Document not created (export data missing)

    We are working on ECC 6.0 and during creation of Cancellation Billing document type IVS for the Intercompany billing, the document did not create Accounting document giving the Posting status as G - Posting document not created (export data missing). However checked the Foreign trade data and the system states that Foreign trade is complete.
    Can any one suggest the solution for this?
    Thanks.

    Hello Mohammad,
    About this issue, the incompletion of this cancellation document
    arises might because the reference delivery has been archived/deleted.
    This is likely due to your current copy control settings (VTFL).
    If you have set ' ', in the export determination field this means that
    there is a common 'exnum' key between the delivery and billing documents
    LIKP-EXNUM & VBRK-EXNUM are the same.
    The result of deleting the delivery is that you also delete the FT data
    for the delivery, Because the billing document and delivery share the
    same foreign trade table entries, you have in effect deleted the FT data
    of the billing document too. This would most likely go unnoticed but if
    you then cancel the invoice the system has no FT to copy into the new
    cancellation billing document, which leads to this issue.
    Firstly you should set the export determination flag in the copy control
    of the delivery & billing documents. This will avoid this issue in the
    future. Set it to to 'A' or 'B' depending on your requirements.
    For the incomplete cancellation billing document, you could use userexit to
    set it as complete:
    You can use transaction CMOD.
    Create a project for example FT project button create short text: ....
    drop button Enhancement assignment & save use for example local object.
    Use the F4-help for Enhancement and look for V50EPROP.
    Drop button Components:
    here you will find EXIT_SAPLV50E_005 and EXIT_SAPLV50E_006
    In the userexits doubleclick on the includes ZXV50U05 and ZXV50U06
    The coding in the userexits should be: C_COMPLETE = 'X'.
    Afterwards activate generate ... and save.
    The development class is VEI.
    Please also check note 118573 which explains the FT user exits.
    Regards,
    Alex

  • CRM Billiing document not posted in Accounting

    Hi Experts,
    Issue:
    CRM Billing documents not posting to FI.
    We idenfied while debugging in middleware we identified that, Billing document header data doesn't contain value for  "Component for RW interface"(COMPO_ACC).
    Where we need to maintain/configure value for this field in CRM/ECC, please provide me details.

    Is this a case of data migration to new GL.
    FAGL_SPLINFO is the table which gets updated for the split information at the time of document posting. If its from migration, please check that the referred RV document is an open item and was migrated correctly.
    Thanks and Regards,
    Mamta Sarda

  • Document in BSEG but not in BKPF. Message displays Document not in Database

    Good day!
    We are using SAP 4.6C.
    Our client wants to display a document posted some time ago using FB03.
    The message displayed, "Document not in database. Search Document archive?"
    I looked for the document in BSEG and found that the document exists there.
    However, the document header data are missing in BKPF.
    Is there a transaction code that could have archived/removed the data in BKPF while
    not changing anything in BSEG?
    Could there be a way to retrieve these data?
    Thank you!

    Good Day !
    For your information, the pop up message prompting for archived mesages "Document is not in database. Search document archive? " is not present anymore in the release ECC 6.0. This pop existed in your release  and this has been phased out as part of continuous product improvement after inputs from various customers.
    In the newer releases instead of this pop up we have the message
    "Document XXXX XXXXXXXXX XXXX is already archived" being displayed at the lower bottom of the screen. This helps you identify that the document was archived. This is the standard SAP behaviour.
    Therefore, your document is archived. To able to retrieve this document again you can use Tcode FBL3N and change the Data source option (there is a button for that) to Archived Data.
    The same you achieve in FB03 when you select Document List button and then Data Sources Button, mark the option Archive.
    I hope this helps.
    Best Regards,
    Vanessa.

  • Save as failed to process. document not saved

    Save as failed to process. document not saved. This is the error message i get when trying export pdf document to word. I only just upgraded window to 8 pro from windows 7.
    Any suggestions?
    Thanks

    What version of Acrobat. That might be the problem.

Maybe you are looking for