ECC 6.0 with Oracle

Hi All,
I have IDES ECC 6.0 with Oracle database Installed. Now the disk space is full. I want to take the backup of the database files / Archive files and delete the same to get quite free space.
Please let me know what all the files I need to take the back up so as to delete it once done.

Use BRBACKUP...
Read,
http://help.sap.com/saphelp_nw04/helpdata/en/79/5e0540a054e469e10000000a155106/frameset.htm
DO NOT DELETE DATAFILES... It will indeed give you space back but your DB will become unusable...!
If you're out of space you're better of getting some extra disk space.
Regards
Juan

Similar Messages

Does /sapmnt need in cluster file system(SAP ECC 6.0 with oracle RAC)

We are going to be installing SAP with Oracle 10.2.0.4 RAC on Linux SuSE 10 and OCFS2. The Oracle RAC documentation states:
You must store the following components in the cluster file system when you use RAC
in the SAP environment:
- Oracle Clusterware (CRS) Home
- Oracle RDBMS Home
- SAP Home (also /sapmnt)
- Voting Disks
- OCR
- Database
What I want to ask is if I really need put SAP Home(also /sapmnt) on cluster file system? I will build a two nodes oracel 10g RAC and I also have another two nodes to install SAP CI and DI. My orginial think is sapmnt is a NFS share, and mount to all four nodes(RAC node and CI/DI), and all oracle stuff was on OCFS2(only two rac nodes are OCFS), anybody can tell me if SAP Home(also /sapmnt) can be NFS mount not OCFS2, thanks.
Best regards,
Peter

Hi Peter,
I don't think you need to keep /sapmnt in ocfs2 . Reason any file system need to be in cluster is,in RAC environment, data stored in the cache of one Oracle instance to be accessed by any other instance by transferring it across the private network and preserves data integrity and cache coherency by transmitting locking and other synchronization information across cluster nodes.
AS this applies to redo files, datafiles and control files only , you should be fine with nfs mount of /sapmnt sharing across and not having ocfs2.
-SV

Import ABAP error during ECC 6.0 installation on Win2003 with Oracle

Dear friends,
I am trying to install ECC 6.0 IDES version on Windows 2003 server with oracle 10g. In fact I had tried few days before and I was getting the same error message. I had posted a separate thread for this and after few suggestions I have moved the sorce data to internald HDD which was earlier on external HDD. Secondly the page file only 4096MB and now I have changed it to 24GB. But still it is giving errors. Only thing is that I have changed the page file size after istalling Oracle, will this effect installation? or is this because of any files corrupted source HDD?
Kindly help me to solve this problem. I would be very much thankful to you. Here I am attaching DOKCLU.log; PCL2.log; sapinst.log; and import_monitor.java.log.
Please let me know if you need any further information.
- Ravinder.
============================================
Error log from DOKCLU.log is as below:
++++++++++++++++++++++++++++++
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Apr 2 2006 23:26:45
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe -i DOKCLU.cmd -dbcodepage 4103 -l DOKCLU.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: DOKCLU created #20101202103735
(RFF) ERROR: invalid checksum in data file "D:\SAPDVD\IDES-Exp 2\EXP2\DATA\DOKCLU.001"
current table was "DOKCLU"
(DB) INFO: disconnected from DB
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
============================================
Error log from PCL2.log
+++++++++++++++++
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Apr 2 2006 23:26:45
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe -i PCL2.cmd -dbcodepage 4103 -l PCL2.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: PCL2 created #20101202103740
(RFF) ERROR: invalid checksum in data file "D:\SAPDVD\IDES-Exp 2\EXP2\DATA\PCL2.001"
current table was "PCL2"
(DB) INFO: disconnected from DB
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
============================================
log from import_monitor.java.log
+++++++++++++++++++++++
Loading of 'SAPDODS' import package: OK
Import Monitor jobs: running 1, waiting 2, completed 40, failed 16, total 59.
Import Monitor jobs: running 2, waiting 1, completed 40, failed 16, total 59.
Loading of 'SAP0000' import package: OK
Import Monitor jobs: running 1, waiting 1, completed 41, failed 16, total 59.
Loading of 'SAPAPPL0_10' import package: OK
Import Monitor jobs: running 0, waiting 1, completed 42, failed 16, total 59.
============================================
log from sapinst.log
+++++++++++++++
Import Monitor jobs: running 2, waiting 9, completed 32, failed 16, total 59.
Import Monitor jobs: running 3, waiting 8, completed 32, failed 16, total 59.
Loading of 'SAPSSEXC_1' import package: OK
Import Monitor jobs: running 2, waiting 8, completed 33, failed 16, total 59.
Import Monitor jobs: running 3, waiting 7, completed 33, failed 16, total 59.
Loading of 'SAPSLOAD' import package: OK
Import Monitor jobs: running ...
ERROR 2010-12-03 05:43:19
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2010-12-03 05:43:19
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .

Hi Rahul,
Thanks for your valuable inputs, but when tried giving the below sqlplus command it is asking for user name and password and there I got stuck. Could you please let me know what is the default user and password or is there anyway we can skip it?
Resolution
stop the all oracle services.all r automatic mode.
restart the system
==> When we restart system again all the automatic oracle services starts right, do we need to stop them again before executing the below command?
login through
goto command promt and type
sqlplus "/as sysdba"
==> after this command it is asking for user name and password
sql> startup
exit
c:---->lsnrctl (I do not understand this command, is it at C prompt or at SQL prompt?
lsnrctl>status (also do not understand how to give this command)
(look for the following message)
The command completed successfully
exit
now u start the installation.
Kindly help, it would be great if you could me your contact details, I will not disturb you but just in case of any help. Thanks once again. - Ravi.

Is ECC 5.0 and EP 6.0 Compatibility with Oracle 10g (10.2.0.2)?

Hi,
Is ECC 5.0 and EP 6.0 are Compatibility with Oracle 10g (10.2.0.2)?
Is there any blog or link to get the details on SAP Compatibility?
Regards,
Vamshi.

Yes, both versions are compatable with oracle 10.2.0.2.
https://websmp210.sap-ag.de/~form/handler?_APP=00200682500000001303&_EVENT=RELEASE&00200682500000002804=01200314690900000171&00200682500000003818=PLTFRM
Regards,
Jazz

Upgrade from SAP R/3 4.7 to SAP ECC 6.0 with PSCD and TFA

Hello!
I have to upgrade an SAP R/3 4.7 to SAP ECC 6.0.
We have SAP FI/CO, PSM, IM, FI-AA, PS, with PSCD (FI-CA) as well the special taxes component TFA.
Is there some special procedures for the the Upgrade with this components (PSCD and TFA)?
Is there some documentation for the special Uograde procedure as well the normal procedure?
We use Windows with Oracle.
Can some one

PSCD is in ERP a Business function set - see 957295 - PSCD: Renaming PUBLIC_SERVICES business function set, the upgrade should automatically take care that activation.
Is TFA the tax extension for Ireland? If yes, then the same should be true here.
Markus

SOAP error in synchronous scenario for ABAP Proxy with Oracle D/B

Dear Experts,
I am working in Sender ABAP Proxy <====>SAP PI 7.31 JAVA only <====> Oracle Database. My proxy configuration are working successfully.
Apart from that, I have maintained a SOAP sender communication channel under the ECC business system with
Transport Protocol as HTTP
Message Protocol as XI 3.0
Adapter Engine as Central Engine
When I am testing from ECC at Tx SPROXY, I am receiving following error.
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.xi.routing.RoutingException: InterfaceDetermination did not yield any actual interface at com.sap.aii.adapter.soap.web.SOAPHandler.processSOAPtoXMB(SOAPHandler.java:746) at com.sap.aii.adapter.soap.web.MessageServlet.doPost(MessageServlet.java:505) at javax.servlet.http.HttpServlet.service(HttpServlet.java:754) at javax.servlet.http.HttpServlet.service(HttpServlet.java:847) at
1. In XI3.0 protocol, I can not select BE but when selected HTTP 1.0 as Message protocol then I can find the BE.
2. No Response message is shown in ECC when testing the message.
3. How do Receiver JDBC adapter for Oracle Database is configured
4. What would be Message Protocol for Oracle Database i.e. XML SQL Format or Native SQL format for Select operation.
Please guide.. All your inputs will be appreciated......
Regards
Rebecca

Dear Indrajit,
Appreciate your inputs.. Yes I have configured all the ABAP proxy configurations and there no question of missing any thing as Tx SLDCHECK in ECC is working perfectly fine.
But still to go, some of the queries needs more input.
1.In ID, i have created a Sender SOAP communication channel with listed details.
Transport Protocol as HTTP
Message Protocol as XI 3.0
Adapter Engine as Central Engine
Is there any parameters which I may be missing from Module tab of Synchronous SOAP Cc ?
2. In the Cc monitoring, the JDBC receiver status shows "Database operation successfully completed" but I could not find any response data from database. The Message monitoring should have 2 messages for 1 trigger, but I could find only 1 message by SOAP only?
Sorry to bother experts...Please answer in sequence...
Regards
Rebecca

Upgrade to Solaris 8 with Oracle 8.0.6

Hi forum,
on a Sparc-Server with Oracle 8.0.6 we want to upgrade from Solaris 7 to Solaris 8. Do we need to upgrade Oracle first or is Oracle 8.0.6 supportet on Solaris 8 ?
Thanks
Hans-Peter

> Our organisation has been running SAP R/3 4.6C on Solaris 8 with Oracle 8i database. We are considering an upgrade to SAP ECC 6.0.
Oh.. you're aware of the fact, that Oracle 8 as well as Solaris 8 is out of support?
I would do it like (if you need/want to stay on the same hardware):
- upgrade Oracle 8 (I hope your run 8.1.7.4) to Oracle 9.2.0.8
- upgrade Solaris 8 to Solaris 10
- upgrade Oracle 9.2.0.8 to Oracle 10.2.0.4 + latest interim patches
- use kernel 46D_EX2
- upgrade the 4.6c to ERP 6.0
Be aware, that, if you plan to use Java applications (such as the Enterprise Portal or other Netweaer related appliation), the ERP 6.0 must be converted to Unicode.
Markus

Integration of SAP ECC 6.0 with SAP Environmental Compliance 3.0

Hi Friends,
We have SAP ECC 6.0 running on Sun Solaris with Oracle as the DB. Now we are in the process of installing SAP Environmental Compliance Version 3.0 which is running in Windows 2008 Server and with SQL Server 2008 as its database.
I'm looking for an answer on how to integrate the SAP ECC 6.0 to SAP EC(Environmental Compliance) system.
Kindly provide your valuable inputs.Looking forward to hear from you soon.
Thanks and Regards,
Vimal

Hello Vimal
regarding this software a number of publications are available:
http://help.sap.com/saphelp_ec30/EC300_FuncDocu_EN.pdf
Here you will find the list of rerequisites etc. and the integration e.g. into SAP EHS Management is explained.
In any case. The SAP marketplace is the right place to take a look regarding prerequisites and how to integrate this software with SAP core (SAP ECC 6.0) or with SAP EHS Management software.
As SAP EHS Management is technically part of ECC 6.0 the link to SAP Enviromental Compliance should be possible.
With best regards
C.B.

ECC 6.0 with EHP4 fresh Installation

Hello Gurus,
A fresh ECC 6.0 with EHP4 needs to be installed on Wnidows + Oracle Platform, please let me know which of the following path should be followed?
1. SAP NW 7.0 installation (without EHP1) --> EHP 1 installation --> EHP4 Installation
2. SAP NW 7.0 with EHP1 installation --> EHP4 installtion
3. SAP NW 7.0 installation --> EHP4 installation
The other way to ask this questions is what are the dependencies between NW7.0 (ECC 6), EHP1 and EHP4?
Please let me know which of the above options is feasible and recommended. Please let me know a better option if its not present in the above options.
Regards,
Saurabh.

Hi,
refer the following SAP note 1143022.
Regards
Manohar

Upgrade SAP ECC 6.0 with SPS 12 to EHP4

Hi!
I would like to update a SAP ECC 6.0 system with EHP4.
I am on Windows 64 Bit with Oracle.
My current SP stack of SAP ECC 6.0 is 12.
The questions are:
Does the SPS 12 of SAP ECC 6.0 fullfil the requirements for the SAP EHP4-Upgrade?
If not what is the strategy to upgrade SAP ECC 6.0 system with SPS 12 to EHP4?
Any helpful information will be very appreciated!
Thank you!

Hi
You can check the below notes
Note 1143022 and 1134872 - Installation of SAP Enhancement Package 4 on SAP ERP 6.0
Regards
Uday

Error in connecting webdynpro with oracle

Hi
 while connecting webdynpro with oracle, i am getting this type of error. I imported the classes12.jar file also.
Error:
java.lang.ClassNotFoundException: oracle.jdbc.driver.OracleDriver
The coding which i used to connect is as follows,
Class.forName("oracle.jdbc.driver.OracleDriver");
 DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
 Connection conn = DriverManager.getConnection(
 "jdbc:oracle:thin:@entegdt36:1521:dbserver",
 "scott","tiger");
 pst=conn.prepareStatement("select * from Test");
 rs=pst.executeQuery();
 while(rs.next())
 res=res+rs.getString(1);
 wdThis.wdGetContext().currentContextElement().setName(res);
Please help me to solve this problem.
It's very urgent.
Thanks in advance.

Hi,
Go to technical landscapes and create a technical landscape for your ECC backend system.
This should solve the problem.
Regards
Bharathwaj.

Integration Scenario with Oracle SOA Suite and SAP

Hi to all
I have the following integration scenario:
The customer have some applications in the integration landscape. All of this applications are integrated with Oracle Soa Suite.
This customer, want to buy SAP ERP (ECC 6.0), and they want to integrate SAP ECC in their infrastructure.
I told to them, that is necesary have Process Integration (PI), by have a services oriented architecture.
But, I want to hear options, possibilities and comments. Where I find information related ?
Thank you very much
Dario

Hi Rodriguez ,
you can use Oracle AS Adapter for SAP for integrating SAP system to oracle .
some step you need to do in SAP ECC side for data transfer - like create TCP/IP RFC connection ,
for TCP/IP RFC config. you can generate program ID in Oracle AS Adapter ..Also Oracle provides a SAP JRFC library for integrating SAP system .
you can find more information in given link -
http://www.oracle.com/technology/products/integration/adapters/dev_support.html
Regards,
Amit Shivhare

Error while installing Oracle Apps server 10.1.3 with Oracle DB 11.2.0.2

Error while installing Oracle Apps server 10.1.3 with Oracle DB 11.2.0.2 residing in the same server and being used by Apps server as it's metadata.
bash-3.00$ export ORACLE_HOME=/data/ora11g/app/ora11g/product/11.2.0
bash-3.00$ cd /data/OAS/install/soa_schemas/irca/
bash-3.00$ ./irca.sh
Integration Repository Creation Assistant (IRCA) 10.1.3.1.0
(c) Copyright 2006 Oracle Corporation. All rights reserved.
ERROR: Cannot find library - /data/ora11g/app/ora11g/product/11.2.0/jdbc/lib/ojdbc14.jar
Please verify that the ORACLE_HOME is set correctly.
bash-3.00$

Hi Craig,
Database 11gR2 could be used for Installing Application Server 10.1.3.x but with some limitation.
So please review the note:-887365.1 Oracle Database 11g Release 2 (11.2) Certification for Oracle Application Server 10g (10.1.2, 10.1.3, 10.1.4)
Section :- Oracle Application Server 10g Release 3 (10.1.3)
Regards,
Praaksh.

Install Solution Manager in RedHat Enterprise 6 with Oracle 11

Hello ,
In the marketplace-PAM, RedHat Enterprise 6 is not listed as approved for EHP1 Solution Manager 7.0 64 bit (unicode) with Oracle.
Does anyone have any information on this subject?
Has anyone installed the Solution Manager 7.0/Oracle with RedHat Enterprise 6?
tks

Yes, you are correct. Apart from PAM, following Note confirms this. RHEL 6 is not supported yet for Oracle, is in planning stage.
Note 1565179 - SAP software and Oracle Linux
Thanks

Unable to boot bankapp servers with Oracle 8.1.7 in windows2000

Hello,I tried to run bankapp examples with oracle 8.1.7 in windows2000. But when
I booted the servers using tmboot, there are some errors.(1)I used the following
RM entries:Oracle_XA;xaosw;D:\Oracle\Ora81\precomp\lib\msvc\oraSQL8.lib D:\Oracle\Ora81\precomp\lib\msvc\oraSQX8.lib
D:\Oracle\Ora81\RDBMS\xa\ORAXA8.lib (2)The OPENINFO string in the ubbshm file
is:DEFAULT:TMSNAME=TMS_ORA TMSCOUNT=2 LMID=SITE1
BANKB1 GRPNO=1 OPENINFO="Oracle_XA:Oracle_XA+Acc=P/scott/tiger+SesTm=100+LogDir=.+MaxCur=5"(3)the
follow is the error message when I booted the servers:
.. 174841.GLOBALDB!BALC.852.2572.0: 07-26-2001: Tuxedo Version 8.0 32-bit Windows.
174841.GLOBALDB!BALC.852.2572.0: LIBTUX_CAT:262: INFO: Standard main starting
174841.GLOBALDB!BALC.852.2572.0: LIBTUX_CAT:466: ERROR: tpopen TPERMERR xa_open
returned XAER_RMERR
174841.GLOBALDB!BALC.852.2572.0: tpsvrinit: failed to open database due to
174841.GLOBALDB!BALC.852.2572.0: tpopen failed, tperrno: 16
174841.GLOBALDB!BALC.852.2572.0: LIBTUX_CAT:250: ERROR: tpsvrinit() failed
174841.GLOBALDB!tmboot.480.548.-2: CMDTUX_CAT:825: ERROR: Process BALC at SITE1
failed with /T tperrno (TPERMERR - resource manager error) ...
Can anyone help? Thanks a lot!
Best Regards
Lily

I found the answer myself in an earlier post.
<BLOCKQUOTE>quote:<HR>Originally posted by The Oracle Reports Team:
Reports 6i will connect to Oracle8i, however you need to connect over Net8 - i.e. on the database side, you need to set up the TNS listener to accept connections, and on the Reports side (which, incidentally, needs to be installed in a separate Oracle_home) you need to configure the tnsnames.ora file to connect to the 'remote' database (since it is in a different oracle_home, to all intents and purposes it may as well be on another machine - it's all considered 'remote').
Regards
The Oracle Reports Team http://technet.oracle.com <HR></BLOCKQUOTE>
null

ECC 6.0 with Oracle

Similar Messages

Maybe you are looking for