ECC5.0 upgrade

Dear gurus,
I'm in a middle of upgrade from R/3 46C to ECC5.0.
In the phase of IS_SELECT, when I choose the support packages for the installation, ECC-DIMP appears.
Did anyone have it ? I didn't find it on service.sap.com. Where can I get it ?
Please Advice,
Dimitry Haritonov

Hello Kasim,
1) There a SAP guide at service.sap.com/instguides -> MySap business suite solutions-> MySAP ERP-> MySAP ERP 2004-> SAP ECC 5.0.
It is a long and detailed process that comes with a long and well detailed guide (sap guide). But I found a lot of bugs and adds-on to the upgrade guide.
So I suggest you to start with SAP guide and note down every little change that you'll need to make for your upgrade.
2)About the client copy, I am not sure but my opinion that it won't work because there are a lot of differences (on the dabase level) between ECC5 and R/3 4.6C (like "enhancement category" on tables and etc).
Regards,
Dimitry Haritonov

Similar Messages

SAP r/3 Plugin activitation or ECC5

Hi All,
Our company is having 4.6C in our landscape. We are having PP,MM,HR,FI/CO,SD modules. We are thinking to have a PM (Plant Maintaince) module in our landscape. Please let me know whether we require any other license or reactvitation from SAP. Or it will cover in our exisiting license.
Pleaes let us know about the ECC5 upgrade. What are the differnet features we will get more in ECC5 as compare to 4.6C. If we will go with ECC5 what is the License process. Will it change to our 4.6C license or we need to take a new license for ECC5. We are having Mainframe also in our landscape.
What is the recommandation to remove mainframe from our landscape and take in to ECC5 or BW. Form cost point of view how much difference?
Thanks and regards,
Ripal

We are in the process of performing a 46C to ECC 5.0 Upgrade (very similar to a 46B starting point I would imagine). I have weblog diary of some of the activities:
/people/thomas.jung3/blog/2005/03/28/erp2004-upgrade-diary
I am due to make an update for the month of August (it is on my to-do list for this week). I have details about the number of Z-programs that will need changes. Most of them are pertaining to Unicode Support.
We are estimating about 2 days of development to make the changes to 110 programs (out of our possible 2,000 programs). So far the changes have fallen into 1 of about 5 easy to fix categories.
Far more important was training our developers for the vast new technical functionality in WebAS 640. You can look at the development training we came up with here:
/people/thomas.jung3/blog/2005/05/15/abap-46c-to-640-delta-training
I actually haven't made any updates to the diary since March/April because we took a few months to project plan, finish open development issues, and train everyone with the linked materials. It was just now in August that we really got started in ernest.

Error at PHASE INTCHK_IMP in 4.71 upgrade

hi,
i am getting below error in 4.7 to ecc5 upgrade:
PREPARE: START OF PHASE INTCHK_IMP
running C:\usr\sap\DEV\SYS\exe\run\tp.exe pf=C:\usr\sap\put\bin\DEFAULT.TPP getddxttent DEV
running C:\usr\sap\DEV\SYS\exe\run\tp.exe pf=C:\usr\sap\put\bin\DEFAULT.TPP getddxtfent DEV
ERROR: 3 entries found in DDXTT.
       All entries are listed in C:\usr\sap\put\log\DDXTTCHK.LOG.
ERROR: 52 entries found in DDXTF.
       All entries are listed in C:\usr\sap\put\log\DDXTFCHK.LOG.
       The entries in DDXTT and DDXTF have to be processed NOW.
       Proceed as described in the upgrade manual.
LOG FILES:
DDXTTCHK.LOG:
DDXTT ENTRY /SDF/UMOD_COMP                 V
DDXTT ENTRY V_DDCPRO                       V
DDXTT ENTRY V_PAD_PATS                     V
DDXTFCHK.LOG:
DDXTF ENTRY /SDF/UMOD_COMP                   0001
DDXTF ENTRY /SDF/UMOD_COMP                   0002
DDXTF ENTRY /SDF/UMOD_COMP                   0003
DDXTF ENTRY /SDF/UMOD_COMP                   0004
DDXTF ENTRY /SDF/UMOD_COMP                   0005
DDXTF ENTRY /SDF/UMOD_COMP                   0006
DDXTF ENTRY /SDF/UMOD_COMP                   0007
DDXTF ENTRY /SDF/UMOD_COMP                   0008
DDXTF ENTRY /SDF/UMOD_COMP                   0009
DDXTF ENTRY /SDF/UMOD_COMP                   0010
DDXTF ENTRY /SDF/UMOD_COMP                   0011
DDXTF ENTRY /SDF/UMOD_COMP                   0012
DDXTF ENTRY /SDF/UMOD_COMP                   0013
DDXTF ENTRY /SDF/UMOD_COMP                   0014
DDXTF ENTRY /SDF/UMOD_COMP                   0015
DDXTF ENTRY V_DDCPRO                         0001
DDXTF ENTRY V_DDCPRO                         0002
DDXTF ENTRY V_DDCPRO                         0003
DDXTF ENTRY V_DDCPRO                         0004
DDXTF ENTRY V_DDCPRO                         0005
DDXTF ENTRY V_DDCPRO                         0006
DDXTF ENTRY V_DDCPRO                         0007
DDXTF ENTRY V_DDCPRO                         0008
DDXTF ENTRY V_DDCPRO                         0009
DDXTF ENTRY V_DDCPRO                         0010
DDXTF ENTRY V_PAD_PATS                       0001
DDXTF ENTRY V_PAD_PATS                       0002
DDXTF ENTRY V_PAD_PATS                       0003
DDXTF ENTRY V_PAD_PATS                       0004
DDXTF ENTRY V_PAD_PATS                       0005
DDXTF ENTRY V_PAD_PATS                       0006
DDXTF ENTRY V_PAD_PATS                       0007
DDXTF ENTRY V_PAD_PATS                       0008
DDXTF ENTRY V_PAD_PATS                       0009
DDXTF ENTRY V_PAD_PATS                       0010
DDXTF ENTRY V_PAD_PATS                       0011
DDXTF ENTRY V_PAD_PATS                       0012
DDXTF ENTRY V_PAD_PATS                       0013
DDXTF ENTRY V_PAD_PATS                       0014
DDXTF ENTRY V_PAD_PATS                       0015
DDXTF ENTRY V_PAD_PATS                       0016
DDXTF ENTRY V_PAD_PATS                       0017
DDXTF ENTRY V_PAD_PATS                       0018
DDXTF ENTRY V_PAD_PATS                       0019
DDXTF ENTRY V_PAD_PATS                       0020
DDXTF ENTRY V_PAD_PATS                       0021
DDXTF ENTRY V_PAD_PATS                       0022
DDXTF ENTRY V_PAD_PATS                       0023
DDXTF ENTRY V_PAD_PATS                       0024
DDXTF ENTRY V_PAD_PATS                       0025
DDXTF ENTRY V_PAD_PATS                       0026
DDXTF ENTRY V_PAD_PATS                       0027

Hi,
Normally this error comes when you have incorrect entries created when you import Support Packages.
You can go thru the SAP Note 857276 which basically deals with a similar sort of a problem caused due to import of BI Content Support pack.
I had come across this error during my TEST upgrade and i had deleted the entries from the table and gone ahead. But do remember to take a backup of the tables before deleting the entries.
Also you can refer to the followink link
[DDXTF entries;
In case errors still exist, do reply back.
Regards,
Suhas

ECC6Ehp5 abap call OLE have error

Dear All,
Our system from ECC5 upgrade to ECC6 Ehp5,Now we have some abap program cann't used it,We checked it,They are all call OLE write data to word.The program source code:
program zchangeword.
INCLUDE ole2incl .
DATA gs_word TYPE ole2_object . "OLE object handle
DATA gs_documents TYPE ole2_object .
DATA gs_actdoc TYPE ole2_object .
DATA gs_application TYPE ole2_object .
DATA gs_selection TYPE ole2_object .
DATA gs_bookmark TYPE ole2_object.
DATA gs_count TYPE ole2_object.
DATA gs_actwindow TYPE ole2_object.
DATA gs_actpane TYPE ole2_object.
DATA gs_view TYPE ole2_object.
DATA gs_font TYPE ole2_object.
DATA docpath TYPE string.
DATA l_dokst TYPE tdws-dokst.
docpath = 'c:\temp\20111124121443_TCDEV0101.doc'.
CREATE OBJECT gs_word 'WORD.APPLICATION' .
IF sy-subrc NE 0 .
MESSAGE 'Error while creating OLE object!' TYPE 'I'.
LEAVE PROGRAM .
ENDIF .
SET PROPERTY OF gs_word 'Visible' = '1' .
GET PROPERTY OF gs_word 'Documents' = gs_documents .
CALL METHOD OF
gs_documents
'Open'
EXPORTING
#1 = docpath.
GET PROPERTY OF gs_word 'ActiveDocument' = gs_actdoc .
CALL METHOD OF
gs_actdoc
'Unprotect'.
GET PROPERTY OF gs_actdoc 'Bookmarks' = gs_bookmark.
GET PROPERTY OF gs_bookmark 'Count' = gs_count.
GET PROPERTY OF gs_actdoc 'Application' = gs_application .
GET PROPERTY OF gs_application 'Selection' = gs_selection .
PERFORM replace USING 'Y0_NAME' 'TEST'.
PERFORM replace USING 'Y0_DATE' '2011.11.24'.
***关闭WORD文件
CALL METHOD OF
gs_actdoc
'Close'
EXPORTING
#1 = '-1'.
CALL METHOD OF
gs_word
'Quit'.
FREE OBJECT: gs_word,gs_documents,gs_actdoc,gs_application,gs_selection.&----*& Form replace
&----* text
----* -->P_FINDTEXT text
-->P_REPLACETEXT text
----FORM replace USING p_findtext
p_replacetext.
CALL METHOD OF
gs_selection
'GoTo'
EXPORTING
#1 = '-1'
#2 = 0
#3 = 0
#4 = p_findtext.
CALL METHOD OF
gs_selection
'MoveEnd'
EXPORTING
#1 = '5'
#2 = '1'.
CALL METHOD OF
gs_selection
'Delete'.
CALL METHOD OF GS_FIND 'ClearFormatting'.
CALL METHOD OF GS_FIND 'Execute'.
CALL METHOD OF
gs_selection
'TypeText'
EXPORTING
#1 = p_replacetext.
ENDFORM. " REPLACE
The code line "GET PROPERTY OF gs_word 'Documents' = gs_documents ."
If the ERP system is ECC5.0,the variable gs_documents can return value,
But system is ECC6 Ehp5 the variable gs_documents cann't return value,Then the program cann't change the word file,Who can help me?

Dear GTREN ,
We use sole checked OLE application:
WORD.BASIC
WORD97
WORDPRO.APPLICATION
They are all same ECC5.0 system.

CNE5 transaction problem in Upgrade ECC5.0

I have problem in the transaction CNE5 . this transaction is working in 4.6b but its showing dump in ECC5.0. saying ABAP errror.we r upgrading from 4.6b to ECC5.o
Can u plz help me
Thanks

its saying
12.11.2005 07:30:41 bissap1 120 C CREATE_OBJECT_CLASS_NOT_FOUND CX_SY_CREATE_OBJECT_ERROR CL_EXIT_MASTER================CP 1

Recommended upgrade method from ECC5 to ECC6 for lowest production downtime

Hello everybody,
I've been looking through multiple documents concerning a system upgrade and I am still unable to figure out the recommended method for upgrading a system with minimum downtime.
My scenario requires that tests as rigid as possible will be performed and that development will be halted for the shortest time possible , therefore development must be continued after the initial upgrade.
We are currently debating the required way to do this - what should be done with the change requests that currently reside in the DEV system, in which steps the incomptabilities are fixed and so on.
I've decided that I'll share my thoughts with you and maybe you guros will be able to point out mistakes in the methodology.
1. ECC 5 Production System is copied aside, lets call this system EPC
2. Change requests from DEV ECC5 are copied to this EPC System.
3. EPC system is upgraded to ECC6.
4. Bugs and incomptabilities such as unicode incomptabilities are fixed and merged in a change request
This ends the preperation step and in my opinion is sort of a preperation step.
During the whole preparation step, which to my estimate could take at least one month, development in the original system must be continued, so this is my main trouble.
What is the recommended procedure from here?
I assume that another production must be done on the day of the actual upgrade start, then the fixes from the previous preperation system are copied to this actual ECC6 Production, but I am rather lost as far as it goes to having an ECC6 Dev with most current change requests.
I would appreciate any hints and help,
thanks in advance,
Eli.

Ok, your idea of having a production copy for development and tests is a good upgrade strategy, we have done this twice due high quantity of developments and configuragion changes but I don´t see why you wrote " copy change requests from DEV to EPC " your whole configuration, programs, etc, are already in EPC once you copy the system.
In this scenario every change made in DEV ECC 5.0 must be also replicated and tested in EPC 6.0 because you cannot use the change requests from 5.0 in 6.0 once in productive upgrade, let me list the global steps:
1.- Homogeneous system copy from PRD to EPC, you will get a working test platform
2.- Upgrade EPC to 6.0
3.- Developers and functionals will do all respective changes and generate chage requests.
Once EPC is ready
4.- Upgrade DEV system to 6.0 transport change requests created in EPC to upgraded DEV, from this point you should only do emergency changes using Q&A system.
5.- Upgrade Q&A system, transport change requests from DEV, no changes are permited from now until PRD is upgraded.
6.- Do all tests very carefully
7.- Upgrade PRD transport change requests
Then you are ready. the downtime can be tune trough EPC, DEV and Q&A systems so you can determine what you shoud do to assure the shortest method.
I recomend you to use the downtime minimized upgrade method and from every upgrade take a deep look at the upgrade report generated after the whole process is completed.

Client wants to upgrade the R/3 from ECC5.0 to ECC 6.0, what is the impact

Client wants to upgrade the R/3 from ECC5.0 to ECC 6.0, what is the impact on BW 3.5.needs to upgrade any thing?.
Is there any impact in BW3.5 system.
This is very urgent.
Please respond immediatly.
Thanks
Vasu.

Determination of Prerequisites
Purpose
As parallel maintenance has been deactivated, you have to implement various measures, depending on how your system has been configured, when you upgrade to release SAP ECC 5.00, Financial Services (EA-FS500). These measures affect release levels SAP ECC 5.0 and SAP ECC 6.0.
Process Flow
Use the graphic and the subsequent documentation to check which activities are required in your system due to the deactivation of parallel maintenance. The process represented in the graphic is explained in greater detail in the following sections:
       1.      Check whether you use the Real Estate (RE-Classic) solution.
¡        If you do not use the Real Estate (RE-Classic) solution, no additional steps are required.
¡        If you use Real Estate (RE-Classic), additional checks are necessary.
       2.      Check whether, in addition to Real Estate (RE-Classic), you also work with a solution that uses the SAP Business Partner.
¡        If you only use Real Estate (RE-Classic), additional checks are necessary.
For more information about the activities to be processed, see Steps for Exclusive Use of Real Estate.
¡        If, in addition to Real Estate (RE-Classic) you also work with a solution that uses the SAP Business Partner, additional checks are necessary.
For more information about the activities to be processed, see Steps for Additional Use of an SAP BP Application.
Regards,
Subha

Combined upgrade and Unicode conversion for ECC5 MDMP system

Hello,
We are planning to do Upgrade and Unicode conversion of ECC5 MDMP system to ECC6 EHP4 Unicode. We are adopting Combined upgrade and Unicode conversion strategy to minimise the downtime.
In source version ECC5 we are in support pack level 6. Should we need to update the support pack to any target version to start with CU&UC or we can start with ECC5 with SP 6 itself.
Since we cant afford more downtime for support pack update also, is it ok to start with upgrade and unicode conversion with current version.
please advice.
Regards
Vinay

Hello Vinay,
please note that as a prerequisite the Basis SP should be accurate for an MDMP conversion.
There is no MUST to have the latest Basis SP, but without you could have severe issues in SPUMG.
On the application side, there are in most cases no hard requirements on the SP level.
Best regards,
Nils Buerckel
SAP AG

Upgradation from 4.6C to ECC5.0

Hi,
What are the requirements for handling the custom development corrections in an upgrade project?
Upgradation from 4.6C to ECC5.0.
After upgradation testing/changing of the customer programming, user-exits, etc is required.
What are the requirements for this?
Regards,
Umesh

Hi Umesh!
In addition to the regular Upgrade Efforts that has to be taken care with the Custom ABAP Programs, For upgradation from 4.6C to ECC 5.0 you have to make a note that SAP ECC 5.0 is Unicode Complaint.SAP ECC 5.0 being Unicode Complaint,the ABAP Syntax check is more intensive.So some of the custom programs might miss this additional syntax check and needs to be repaired accordingly.The Transaction UCCHECK can perform the Unicode Complaint Test.The repair work depends on the volume of the custom ABAP programs you have.
Gisk

Upgrading ECC5.0 to ECC6.0 and Internet Sales ISA4.0 CRM4.0

We are performing a technical upgrade of ECC5.0 to ECC6.0 and we are seeking confirmation and instructions for connecting our existing ISA4.0 system to ECC6.0. I have searched OSS and SDN and queried our SAP account manager for some confirmation and documentation on ISA4 and ECC6.0 compatability
Any advice, confirmation and documentation on connecting Internet Sales version 4.0 component to ECC 6.0 is greatly appreciated.
Here are the details of our ISA4 system
Kind regards
ISA System
sap.com      SAP-JEE      6.40 SP9 (1000.6.40.9.0.20041119045409)
sap.com      com.sap.mw.jco       (6.4009.00.0000.20041026130530.0000)
sap.com      com.sap.security.dbschema       (6.4009.00.0000.20041115123517.0000)
sap.com      crm.b2b       (400.200904212104)
sap.com      crm.b2b_lanl       (400.200904221705)
sap.com      crm.b2c       (400.1020060105115443.0000)
sap.com      crm.mcm       (400.1020060105115443.0000)
sap.com      crm.shopadmin       (400.1020060105115443.0000)
sap.com      crm.trexr3       (400.1020060105115443.0000)
sap.com      IAIKSecurityFS       (1.3.12)
sap.com      isacoreddic       (400.1020060105115443.0000)
JDK 1.4.2_11-b06
TREX6.1
Windows 2003 (x86) 5.2
Warm regards
Lee Lewis

When an incorrect password is entered, the expected message:
"Name or password is incorrect (Please repeat logon) "
is displayed. When the correct password is entered, this message is displayed:
"Error in user administration"
No error messages are logged during the login attempt, only the following:
Message , Datasource
Feb 9, 2010 12:03:54 PM                     bbtracing.isa.runtime [SAPEngine_Application_Thread[impl:3]_34] Debug: [(J2EE3718900)ID3718950DB871103440658474576End|?][actionxecution]='end' [actionclass]='com.sapmarkets.isa.isacore.action.b2b.LoginAction' [path]='/b2b/reallogin' [forward]='/b2b/login/login.jsp' [exectime]='94' , 52 [Server 0 0_37189:D:\usr\sap\SSD\JC00\j2ee\cluster\server0\apps\sap.com\crm.b2b_lanl\servlet_jsp\b2b_lanl\root\WEB-INF\logs\isaruntime.log]
Feb 9, 2010 12:03:54 PM                     bbtracing.isa.runtime [SAPEngine_Application_Thread[impl:3]_34] Debug: [(J2EE3718900)ID3718950DB871103440658474576End|?][jcofunctionexecution]='end' [funcname]='BAPI_USER_GET_DETAIL' [ashost]='sapsbx' [sysid]='SBX' [exectime]='31' , 52 [Server 0 0_37189:D:\usr\sap\SSD\JC00\j2ee\cluster\server0\apps\sap.com\crm.b2b_lanl\servlet_jsp\b2b_lanl\root\WEB-INF\logs\isaruntime.log]
Feb 9, 2010 12:03:54 PM                     bbtracing.isa.runtime [SAPEngine_Application_Thread[impl:3]_34] Debug: [(J2EE3718900)ID3718950DB871103440658474576End|?][jcofuncionexecution]='begin' [funcname]='BAPI_USER_GET_DETAIL' [ashost]='sapsbx' [sysid]='SBX' , 52 [Server 0 0_37189:D:\usr\sap\SSD\JC00\j2ee\cluster\server0\apps\sap.com\crm.b2b_lanl\servlet_jsp\b2b_lanl\root\WEB-INF\logs\isaruntime.log]
Feb 9, 2010 12:03:54 PM                     bbtracing.isa.runtime [SAPEngine_Application_Thread[impl:3]_34] Debug: [(J2EE3718900)ID3718950DB871103440658474576End|?][jcofunctionexecution]='end' [funcname]='SUSR_LOGIN_CHECK_RFC' [ashost]='sapsbx' [sysid]='SBX' [exectime]='15' , 52 [Server 0 0_37189:D:\usr\sap\SSD\JC00\j2ee\cluster\server0\apps\sap.com\crm.b2b_lanl\servlet_jsp\b2b_lanl\root\WEB-INF\logs\isaruntime.log]
Feb 9, 2010 12:03:54 PM                     bbtracing.isa.runtime [SAPEngine_Application_Thread[impl:3]_34] Debug: [(J2EE3718900)ID3718950DB871103440658474576End|?][jcofuncionexecution]='begin' [funcname]='SUSR_LOGIN_CHECK_RFC' [ashost]='sapsbx' [sysid]='SBX' , 52 [Server 0 0_37189:D:\usr\sap\SSD\JC00\j2ee\cluster\server0\apps\sap.com\crm.b2b_lanl\servlet_jsp\b2b_lanl\root\WEB-INF\logs\isaruntime.log]
Feb 9, 2010 12:03:54 PM                     bbtracing.isa.runtime [SAPEngine_Application_Thread[impl:3]_34] Debug: [(J2EE3718900)ID3718950DB871103440658474576End|?][jcofunctionexecution]='end' [funcname]='RFC_SYSTEM_INFO' [ashost]='sapsbx' [sysid]='SBX' [exectime]='0' , 52 [Server 0 0_37189:D:\usr\sap\SSD\JC00\j2ee\cluster\server0\apps\sap.com\crm.b2b_lanl\servlet_jsp\b2b_lanl\root\WEB-INF\logs\isaruntime.log]
Feb 9, 2010 12:03:54 PM                     bbtracing.isa.runtime [SAPEngine_Application_Thread[impl:3]_34] Debug: [(J2EE3718900)ID3718950DB871103440658474576End|?][jcofuncionexecution]='begin' [funcname]='RFC_SYSTEM_INFO' [ashost]='sapsbx' [sysid]='SBX' , 52 [Server 0 0_37189:D:\usr\sap\SSD\JC00\j2ee\cluster\server0\apps\sap.com\crm.b2b_lanl\servlet_jsp\b2b_lanl\root\WEB-INF\logs\isaruntime.log]
Feb 9, 2010 12:03:54 PM                     bbtracing.isa.runtime [SAPEngine_Application_Thread[impl:3]_34] Debug: [(J2EE3718900)ID3718950DB871103440658474576End|?][actionxecution]='begin' [actionclass]='com.sapmarkets.isa.isacore.action.b2b.LoginAction' [path]='/b2b/reallogin' , 52 [Server 0 0_37189:D:\usr\sap\SSD\JC00\j2ee\cluster\server0\apps\sap.com\crm.b2b_lanl\servlet_jsp\b2b_lanl\root\WEB-INF\logs\isaruntime.log]
Feb 9, 2010 12:03:54 PM                     bbtracing.isa.runtime [SAPEngine_Application_Thread[impl:3]_34] Debug: [(J2EE3718900)ID3718950DB871103440658474576End|?][actionxecution]='end' [actionclass]='com.sapmarkets.isa.isacore.action.DetermineBrowserVersionAction' [path]='/b2b/login' [forward]='/b2b/reallogin.do' [exectime]='15' , 52 [Server 0 0_37189:D:\usr\sap\SSD\JC00\j2ee\cluster\server0\apps\sap.com\crm.b2b_lanl\servlet_jsp\b2b_lanl\root\WEB-INF\logs\isaruntime.log]
Feb 9, 2010 12:03:54 PM                     bbtracing.isa.runtime [SAPEngine_Application_Thread[impl:3]_34] Debug: [(J2EE3718900)ID3718950DB871103440658474576End|?][actionxecution]='begin' [actionclass]='com.sapmarkets.isa.isacore.action.DetermineBrowserVersionAction' [path]='/b2b/login' , 52 [Server 0 0_37189:D:\usr\sap\SSD\JC00\j2ee\cluster\server0\apps\sap.com\crm.b2b_lanl\servlet_jsp\b2b_lanl\root\WEB-INF\logs\isaruntime.log]

Error when executing Prepare in upgrade from R/3 4.7EE to ECC5.0

HI,
I am trying to upgrade R/3 4.7EE to ECC5.0 DB :Oracle:OS:Windows.I am executing the Prepare.bat fron upgrade Master and I choose the EXIT option at the last.After that from cmd I ran java -cp <UPG DIR>\ua\ua.jar UaServer ,but after that it is not asking any password for administator.I am trying to login to the Upgrade console from http://localhost:port but it is asking administrator password.My question is in my case why it is not asking any password though
I am getting Uaserver started message.
Thanks in advance,
Regards,
Sagar Askani.

Hi,
After entering EXIT, from command prompt you would need to go to "ua" foler and the execute the following command.
java -cp ua.jar.UaServer
then it will ask for administrator password.
And then the Ua server will be started.
Leave this window as it is.
Open another window in command prompt.
then execute the command
java -cp uagui.jar.UaGui.
This will open the upgrade assistant. Enter the Host name and then the User name as Administrator and the password.
This should help you in resolving the issue.
Regards,
Imran

PC00_M14_CDTA ECC5 to ECC6 Upgrade Missing Selection Field

Hi All,
Found out Selection Field of (Pay date) during Upgrade from ECC5 to ECC6 on TCODE : PC00_M14_CDTA.
More information you can refer to below print screen.
Thank in advance for advice.
Trevor Wong.

This has been replaced by "Requested Execution Date". Here is the standard hlpe for this:
Requested Execution Date on Which the Payment Is to Be Made
Use
In this field, you can enter a date on which the bank is to execute a payment. The date is transferred together with the payment information to Financial Accounting (FI), where the payment is executed.
You can use the date to override the default setting or the date determined by implementing the Business Add-In (BAdI) Change of Requested Execution Date for the Payments (HRDME_B_ REGUH_DUE_DATE).
In many countries, the system date is used as the default value for the execution date. In some countries, the payment date of the payroll period is used.
Dependencies
The following sequence applies to determining the execution date:
1. The defined default value is used as the execution date.
2. If the BAdI HRDME_B_ REGUH_DUE_DATE is implemented, the execution date is determined using this BAdI.
3. If a date is entered on the selection screen of the preliminary program, this overrides the default value or the value determined by the BAdI.

Upgradation issue related to ecc5.0 to 7nw

hi experts
These regarding what type questionears we need to put for upgard from ecc5.0 to 7nw ?
the clent having all hcm module ie om,pa,tm,payroll india and ess/mss, e-rec and interstated in upgrade
I need to put some question bank regarding this..
Since this is my first upgrationg project i donot have any idea about this i would higly appriciate you all if you explain this things and quiestionaries..
Reply soon..
Thanks in advance....
Thanks
Nisha

before upgrade you have to run the pre-requiste checker. It will check the system and tell you exactly whether this system can be upgraded. Once that is done you can download the sap quick sizer from service marketplace to chekc the hardware scope of the upgrade. Else you have th implimentation experience then there will be extra 10 to 15,000 tables added in new version and also the changes in program and also you need space for shadow instance.
Check the DB files area and if the data is 4-5 years old you can archive the data if the company policy support. Keep suffiecinebt space in SAP Application drive and also the DB files drive. See the virtual memory properly see also the RAM 16 GB minimum if you can keep will be better. If it is more excellent and also the CPU's. If you have more CPU capacity the processing will be faster you can define more parallel processes during upgrade. So, these are the few hardware related things to take care of.
About documentation refer the sap upgrade guide and all the sapnoten download which are mentioned in the upgrade guide. It is excellent. I have used these guides and sapnotes while upgrade and it was ok.
During the upgrade you may face some problems this is normal and you should look the logs which are there in the upgrade directory \usr\sa\put\.....
be careful in analyzing the errors and all the pr-requistites which you have to do before upgrade mentioned in the guide. If you follow these properly you will have very less issues. During phase act_640 you may have to do some dictionery adjustments which depends on the dictonery objects you can take help from the developer for this.
There is one tool to restore the variants that is ASU(application specific upgrade).
Then your variants will not be lost. Go to sap site http://service.sap.com/upgrade and checkout all upgrade related documents. You are done.
It will be a smooth upgrade.
Rgds and Good luck.

Upgrade from ecc5 to ecc6 old data like PRD640_1 is still there

Dear All,
we have resent   upgrade from ecc5 to ecc6 and i have some quires regarding the datafile.
In sapdata1 -4 i see all old data like PRD640_1 i still there .Please suggest it is ok or it should not be there in the sapdata.
in db02 tablespace
PSAPEL701D
PSAPEL701I
PSAPPRD
PSAPPRD640
PSAPPRD701
PSAPPRDUSR
PSAPTEMP
PSAPUNDO
PSAPUNDO2
SYSAUX
SYSTEM
There is once more thing when i am extend the table from brtools for
BR*Tools main menu 2 - Space management 1 = Extend tablespace 3 ~ Tablespace name (tablespace) ... []
1 - BRSPACE profile (profile) ...... [initPRD.sap]
2 - Database user/password (user) .. [/]
3 ~ Tablespace name (tablespace) ... [PSAPPRDUSR]
4 - Confirmation mode (confirm) .... [yes]
5 - Scrolling line count (scroll) .. [20]
6 - Message language (language) .... [E]
7 - BRSPACE command line (command) . [-p initPRD.sap -s 20 -l E -f tsextend -t
PSAPPRDUSR]
c
c
Options for extension of tablespace PSAPPRDUSR (1. file)
1 * Last added file name (lastfile) ....... [L:\ORACLE\PRD\SAPDATA4\PRDUSR_4\PR
DUSR.DATA4]
2 * Last added file size in MB (lastsize) . [460]
3 - New file to be added (file) ........... [L:\oracle\PRD\sapdata4\prdusr_5\pr
dusr.data5]
4 # Raw disk / link target (rawlink) ...... []
5 - Size of the new file in MB (size) ..... [460]
6 - File autoextend mode (autoextend) ..... [yes]
7 - Maximum file size in MB (maxsize) ..... [500]
8 - File increment size in MB (incrsize) .. [20]
9 - SQL command (command) ................. [alter tablespace PSAPPRDUSR add da
tafile 'L:\oracle\PRD\sapdata4\prdusr_5\prdusr.data5' size 460M autoextend on ne
xt 20M maxsize 500M]
BR0259I Program execution will be continued...
BR1049W Not enough free space in L:\oracle\PRD\sapdata4\prdusr_5 for total maxim
um size of all database files of tablespace PSAPPRD located on this disk volume,
missing at least 741702.647 MB
BR1049W Not enough free space in L:\oracle\PRD\sapdata4\prdusr_5 for total maxim
um size of all database files of tablespace PSAPPRD640 located on this disk volu
me, missing at least 137942.647 MB
BR1049W Not enough free space in L:\oracle\PRD\sapdata4\prdusr_5 for total maxim
um size of all database files of tablespace PSAPPRDUSR located on this disk volu
me, missing at least 13522.647 MB
BR0668I Warnings or errors occurred - you can continue to ignore them or go back
to repeat the last action
Please suggest what is right configuration and how to sol ther error in brtools.
Regards,
Kumar

Hello Kumar9,
if I understoon correctly your last reply, you have doubts if PSAPPRD640 should exist at all, correct?
Please do the following:
1) Check any object assigned to this tablespace PSAPPRD640
2) If any object occupied to PSAPPRD640 then reorganise to new tablespace
If any object not occupied to PSAPPRD640 then check the table entry
   a)TAORA for tablespace PSAPPRD640(if exist delete)
   b)IAORA for tablespace PSAPPRD640(if exist delete)
3) If above done then drop the tablespace through BRTools.
Best regards,
Tomas Black

Upgrade SAP 4.7 to ECC5

Hi,
Could anyone please advise me a functional compliance check list from SAP for upgrade SAP 4.7 to ECC5 or ECC6 and related OSS Note? Thanks so much for all advise.
Best Regards,
Bird

Hi Bird,
I am sending url of upgrade differencess from SAP 4.7 to ECC5
Here u give from to version and module.
http://solutionbrowser.erp.sap.fmpmedia.com/Default.aspx
Regards
Surya

ECC5.0 upgrade

Similar Messages

Maybe you are looking for