ECC5 How to read the stored value from Team Viewer

Hi,
How can I pick up the stored value from the team viewer from within ECC5?
I would normally use FM 'HR_ASR_WDA_GET_EMPLOYEE' to read mem id MSS01 but this doesn't exist in ECC5.
All help appreciated.
Rob

Similar Messages

How to read the field value from Table Control

Hello Experts,
I am creating my first Table Control Screen. Basically I have to create a screen (102) with a table control which has 2 fields: A_QTY, B_QTY and 2 Buttons: SAVE, EXIT.
When Clicked on 'SAVE' the data (MATNR) from a previous screen (101) and the data (A_QTY, B_QTY) from the new screen (102) should be saved into a Z-table.
Internal table t_data has 3 fields.
MATNR
A_QTY
B_QTY.
Table Control TC_RACK was declared like this:
controls tc_rack type tableview using screen 0102.
I/0 Fields:
A_QTY type ZQTY.
B_QTY type ZQTY.
The screen Flow Logic:
process before output.
module status_0102.
loop at t_data into w_data with control tc_rack.
endloop.
process after input.
module exit_0102 at exit-command.
loop at tc_rack.
endloop.
module user_command_0102.
module status_0102output.
set pf-status 'STATUS_102'.
set titlebar 'TITLE_102'.
describe table t_rack lines tc_rack-lines.
endmodule.                 "status_0102 output
process after input.
module user_command_0615 input.
case ok_code.
   when 'SAVE_RK'.
   when others.
endcase.
endmodule.                 "user_command_0102 input
Now for eg, when the users enter values for A_QTY and B_QTY like this:
A_QTY     B_QTY
1000         2000
3000         4000
How can I read these values and pass them to T_DATA so that I can save it into Z-table?
I greatly appreciate your help.
I've gone through some previously posted threads and could not understand because my knowledge in this area is preliminary.
Thanks a lot.
Could you please let me know
Edited by: dev a on Jan 13, 2010 2:46 PM

Hi dev a
You should use
DATA: lv_name(30) TYPE c.
FIELD-SYMBOLS: <QTY> type ZQTY.
GET CURSOR FIELD lv_name.   "Get the field name in table control
check sy-subrc = 0.
assign (lv_name) to <QTY>. "Here you get the value in <QTY>
check sy-subrc = 0.
Also use <your table control>-current_line to get the table index uo're currently on.
Hint: Do not use GET CURSOR LINE if you want to get table index since this gives you the line relative to dialog screen
Good luck
Dean Q.
Edited by: Dean Q on Jan 13, 2010 11:11 PM

How to read the Key value from the Message using the text value.. Urgent

I need to read the Key valuefrom the message pool using the text value for the Key.. Is it possible.. Please help me with sample code..
Thanks and Regards
Avijit

Avijit,
I got your requirement. I really dont know the scenario your working on but its possible to do it. There is no direct way to do so, but complexity is in getting to know the Keys dynamically from interface.
Here you go..
     try
          Class msgClass      = IMessageTestWDApps.class;
//Replace IMessageTestWDApps with IMessage<Your WD Component name>
          Field keys[]      = msgClass.getFields();
          IWDTextAccessor textAccessor = wdComponentAPI.getTextAccessor();
          if(keys != null)
               String key = "";
               for(int index=0;index<keys.length;index++)
                    key = keys[index].getName();
                    wdComponentAPI.getMessageManager().reportSuccess("Key= "+key);
                    if(textAccessor.getText(key).equals("My message text"))
                         //your logic.
     catch(Exception cnfe)
          wdComponentAPI.getMessageManager().reportException("Exe "+cnfe.getMessage(),false);
Regards
Abhilash
Message was edited by:
        Abhilash Gampa

Java API to read the Encrypted Values from Windows Registry settings

Is there any Java API to read the Encrypted Values from Windows Registry settings ?
My Java Application invokes a 3rd party Tool that writes the key/value to windows registry settings under : “HKLM\Software\<3rdparty>\dataValue”.
This entry is in BINARY and encrypted with 3DES, using crypto API from Microsoft.
3rd party software to encrypt the data stored in registry it
either uses C++ code: and uses the call “CryptProtectData” and “CryptUnProtectData” or
If it is a .NET (C#) it uses the call “Protect” or “UnProtect” from class “ProtectData” of WinCrypt.h from the library “Crypt32.lib.
Note: The data is encrypted using auto-generated machinekey and there is no public key shared to decrypt the Encrypted data.
Since the data is encrypted using auto-generated machinekey the same can be decrypted from a .Net / C++ application using CryptUnprotectData or UnProtect() API of WinCrypt.h from the library “Crypt32.lib.
To know more about Auto-Generated MachineKey in Windows refer the links below
http://aspnetresources.com/tools/machineKey
http://msdn.microsoft.com/en-us/library/ms998288.aspx
I need to find a way in Java to find the equivalent API to decrypt (CryptUnprotectData) and Microsoft will automatically use the correct key.
But i couldn't find any informato related to Java APIs to enrypt or decrypt data using auto-generated machinekey.
Is there a way to read the encrypted data from Windows regsitry settings that is encrypted using the Auto-Generated Machine Key ?
Kindly let me know if Java provides any such API or mechanism for this.

If the symmetric key is "auto-generated" and is not being stored anywhere on the machine, it implies that the key is being regenerated based on known values on the machine. This is the same principle in generating 3DES keys using PBE (password-based-encryption). I would review the documentation on the C# side, figure out the algorithm or "seed" values being used by the algorithm, and then attempt to use the JCE to derive the 3DES key using PBE; you will need to provide the known values as parameters to the PBE key-generation function in JCE. Once derived, it can be used to decrypt the ciphertext from the Regiistry in exactly the same way as the CAPI/CNG framework.
An alternate way for Java to use this key, is to write a JNI library that will call the native Windows code to do the decryption; then the Java program does not need to know details about the key.
That said, there is a risk that if your code can derive the key based on known seeds, then so can an attacker. I don't know what your applicatiion is doing, but if this is anything related to compliance for some data-security regulation like PCI-DSS, then you will fail the audit (for being unable to prove you have adequate controls on the symmetric key) if a knowledgable QSA probes this design.
Arshad Noor
StrongAuth, Inc.

How to get the return values from a web page

Hi all :
how to get the return values from a web page ? I mean how pass values betwen webflow and web page ?
thank you very much
Edited by: jingying Sony on Apr 15, 2010 6:15 AM
Edited by: jingying Sony on Apr 15, 2010 6:18 AM

Hi,
What kind of web page do you have? Do you have possibility to for example make RFCs? Then you could trigger events (with parameters that could "return" the values) and the workflow could react to those events. For example your task can have terminating events.
Regards,
Karri

How to change the Unitprice value from 2 decimals to 3 decimals in script

Hi Gurus,
how to change the Unitprice value from two decimals to three decimals for each item level for PO in script.
Please provide some possible solutions.
Thanks,
V.V.

Hi,
Check the options available like
&VAR(.2)& this will print 2 decimals
&VAR(.3)& this will print 3 decimals
need to change the value for how many decimals you need
Thanks & Regards
Sarves Sombhatla

How to get the query values from the url in a servlet and pass them to jsp

ok..this is the situation...
all applications are routed through a login page...
so if we have a url like www.abc.com/appA/login?param1=A&param2=B , the query string must be passed onto a servlet(which is invoked before the login page is displayed)..the servlet must process the query string and then should pass all those values(as hidden values) to the login jsp..then user enters username and pswd, then there should be another servlet which takes all the hidden values of jsp and also username and pswd, authenticates the user and sends the control back to that particular application along with the hidden values...
so i need help on how to parse the query string from the original url in the servlet, pass it out to jsp, and then pass it back to the servlet and back to the original application...damnn...any help would be greatly appreciated...thanks

ok..this is the situation...Sounds like you have a bad design on your hands.
You're going to send passwords in a GET request as clear text? Nice security there.
Why not start with basic security and work your way up?
%

How to get the Node Value from XmlValue result?

Hi ,
I am not able to get the Node Value from the result. In my XQuery im selecting till a Node, if i change my query as
collection('PhoneBook')/phone_book/contact_person/address/string()", qc);
im getting the node value, but here the problem is its not a Node so i cannot get the Node name.
So how can i get the Node Name and Node value together?
any help please ????
XML :
<?xml version="1.0" encoding="UTF-8"?>
<phone_book>
<contact_person>
<name>
<first_name>Michael</first_name>
<second_name>Harrison</second_name>
</name>
<address city="yyyyy" pincode="600017" state="xxxxx">
176 Ganesan street, Janakinagar, alwarthirunagar
</address>
</contact_person>
<phone_number type="mobile">9881952233</phone_number>
<phone_number type="home">044-24861311</phone_number>
<phone_number type="office">080-12651174</phone_number>
</phone_book>
Code:
XmlQueryContext qc = manager.createQueryContext();
XmlResults rs = manager.query
("collection('PhoneBook')/phone_book/contact_person/address", qc);
while(rs.hasNext()){
XmlValue val = rs.next();
System.out.println(val.getNodeName() + " = [ " + val.getNodeValue() + " ] ");
Output
address = [ ]

You are right, this seemed un-intuitive to me too, but I finally understood how it's done.
The "value" of a node is actually the total amount of text that is not contained in any of the node's child nodes (if any). So a node with child nodes can still have text value.
To get the 'value' of an element node, you must therefore concatenate the values of all children of type "XmlValue::TEXT_NODE", of that node. Try it.
In your example, the <address> node has no child elements, my guess is that BDB XML stores the address string "176 Ganesan street, Janakinagar, alwarthirunagar" inside a child node of <address> node (of type XmlValue::TEXT_NODE) because you wrote the string on a separate line.

How to read the selected value of a dropdown list box

Hello,
I have 2 custom fields which are of type dropdown list on Accounts(CRMM_ACCOUNT) PCUI application details tab.I need to read the selected value of first dropdown list item,based on that second dropdown list will be populated.
I know where to populate the dropdown list box,it is in FILL_DROPDOWN_LISTBOX.
I dont know how to trap the selection made on dropdown list.
PLease guide me on how to trap the dropdown list field selection value.
Thanks in advance.
Thirumala.

Hello,
Check what is done in standard for the fielf REGION which is inked to the country.
Otherwise, you can do the following :
- in field group customizing, for field 1, flag the 'send request' flag. So, when you change the value in this field via the dropdown, the MAC methods are immediately called.
- Put the new value in a global variable (GV).
- in the fill_dropdown_listbox method, get the value from this GV and based on it, filter the values for the dropdown of field 2.
Hope this will help you,
Regards,
Frederic

How find out the duplicate value from each columns.

I have below four columns,
How can i find out the duplicate value from each columns.
with All_files as (
select '1000' as INVOICE,'2000' AS DELIVERYNOTE,'3000' CANDELINVOICE,'4000' CANDELIVERYNOTE from dual union all
select '5000','6000','7000','8000' from dual union all
select '9000','1000','1100','1200' from dual union all
select '1200','3400','6700','8790' from dual union all
select '1000','2000','3000','9000' from dual union all
select '1230','2340','3450','4560' from dual
SELECT * FROM All_files
Output should be as per below.
1000 2000 3000 4000
9000 1000 1100 1200
1200 3400 6700 8790
1000 2000 3000 9000
Required to check uniqueness in cross columns.
Thanks.

Try this (sorry about the formatting)...
WITH all_files AS (SELECT   '1000' AS INVOICE,
                            '2000' AS DELIVERYNOTE,
                            '3000' CANDELINVOICE,
                            '4000' CANDELIVERYNOTE
                     FROM   DUAL
                   UNION ALL
                   SELECT   '5000',
                            '6000',
                            '7000',
                            '8000'
                     FROM   DUAL
                   UNION ALL
                   SELECT   '9000',
                            '1000',
                            '1100',
                            '1200'
                     FROM   DUAL
                   UNION ALL
                   SELECT   '1200',
                            '3400',
                            '6700',
                            '8790'
                     FROM   DUAL
                   UNION ALL
                   SELECT   '1000',
                            '2000',
                            '3000',
                            '9000'
                     FROM   DUAL
                   UNION ALL
                   SELECT   '1230',
                            '2340',
                            '3450',
                            '4560'
                     FROM   DUAL),
    t_base
       AS (SELECT      invoice
                    || ','
                    || deliverynote
                    || ','
                    || candelinvoice
                    || ','
                    || candeliverynote
                       str
             FROM   all_files),
    t_str
       AS (SELECT   str || ',' AS str,
                    (LENGTH (str) - LENGTH (REPLACE (str, ','))) + 1
                       AS no_of_elements
             FROM   t_base),
    t_n_rows
       AS (    SELECT   LEVEL AS i
                 FROM   DUAL
           CONNECT BY   LEVEL <=
                           (    SELECT   SUM (no_of_elements) FROM t_str)),
    t_build AS (SELECT   t_str.str,
                         nt.i AS element_no,
                         INSTR (t_str.str,
                                DECODE (nt.i, 1, 0, 1),
                                DECODE (nt.i, 1, 1, nt.i - 1))
                         + 1
                            AS start_pos,
                         INSTR (t_str.str,
                                1,
                                DECODE (nt.i, 1, 1, nt.i))
                            AS next_pos
                  FROM      t_str
                         JOIN
                            t_n_rows nt
                         ON nt.i <= t_str.no_of_elements),
    t_build2
       AS (SELECT   RTRIM (str, ',') AS original_string,
                    SUBSTR (str, start_pos, (next_pos - start_pos))
                       AS single_element,
                    element_no
             FROM   t_build),
    t_build3
       AS (SELECT   single_element,
                    COUNT( * )
                       OVER (PARTITION BY single_element
                             ORDER BY single_element)
                       ele_count
             FROM   t_build2)
SELECT   DISTINCT INVOICE,
                  DELIVERYNOTE,
                  CANDELINVOICE,
                  CANDELIVERYNOTE
FROM   all_files, t_build3
WHERE   ele_count > 1
         AND (   INVOICE = single_element
              OR DELIVERYNOTE = single_element
              OR CANDELINVOICE = single_element
              OR CANDELIVERYNOTE = single_element)I think this will be faster than the previous solution?
Cheers
Ben
Edited by: Munky on Feb 17, 2011 2:11 PM - "I think this will be faster than the previous solution?", nope - it's not :(

How to get the selected values from a selectmanylistbox?

Hi ADF Experts,
<af:selectManyListbox label="Label 1" id="sml1" partialTriggers="cb2"
                        value="#{viewScope.TestBean.lovValue}"
                  autoSubmit="true"      valuePassThru="true">
    <f:selectItems value="#{viewScope.TestBean.actualList}" id="si1"
                   binding="#{viewScope.TestBean.selectedItems}"/>
</af:selectManyListbox>
<af:commandButton text="get selected values" id="cb3"
                    actionListener="#{viewScope.TestBean.getSelectedValues}"
                    partialSubmit="true"/>
private List<String> lovValue;
private List<SelectItem> actualList;
//getters and setters
public void getSelectedValues(ActionEvent actionEvent) {
    // Add event code here...
    for (String selectedItem : lovValue) {
        System.out.println("Selected item: " +selectedItem.); // this is giving 1 and 3 like this. how to get the checked values as I'm getting only the indexes. In this scenario I am populating the list programmatically.Just I wanted to know how can we get the selected values(not indexes). Please suggest.
Thanks-
Abhijit

Hi Timo,
As I am sharing the page fragment and the Java class. So its my usecase I have mentioned below
I am sharing the jsff page fragment and java class. So that it wud be of help to others.
jsff page fragment
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
          xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
          xmlns:f="http://java.sun.com/jsf/core">
        <af:panelGroupLayout id="pgl1">
          <af:commandButton text="Search" id="cb1"
                            actionListener="#{viewScope.TestBean.searchSupplier}"/>
</af:panelGroupLayout>
    <af:popup id="p1" binding="#{viewScope.TestBean.searchSupplierPopup}">
          <af:dialog id="d2"
                     type="none">
           <af:table value="#{bindings.Contacts.collectionModel}" var="row"
                  rows="#{bindings.Contacts.rangeSize}"
                  emptyText="#{bindings.Contacts.viewable ? 'No data to display.' : 'Access Denied.'}"
                  fetchSize="#{bindings.Contacts.rangeSize}"
                  rowBandingInterval="0"
                  binding="#{viewScope.TestBean.tsupportIssues}"
                  filterModel="#{bindings.ContactsQuery.queryDescriptor}"
                  queryListener="#{bindings.ContactsQuery.processQuery}"
                  filterVisible="true" varStatus="vs"
                  selectionListener="#{bindings.Contacts.collectionModel.makeCurrent}"
                  rowSelection="multiple" id="t1">
          <af:column sortProperty="name" filterable="true" sortable="true"
                     headerText="#{bindings.Contacts.hints.name.label}" id="c2">
            <af:outputText value="#{row.name}" id="ot1"/>
          </af:column>
          <af:column sortProperty="email" filterable="true" sortable="true"
                     headerText="#{bindings.Contacts.hints.email.label}"
                     id="c1">
            <af:outputText value="#{row.email}" id="ot2"/>
          </af:column>
        </af:table>
      <af:commandButton text="OK" id="cb5" partialSubmit="true"       actionListener="#{viewScope.TestBean.testMethod}"/>
      <af:commandButton text="Cancel" id="cb6"
                        actionListener="#{viewScope.TestBean.cancelPopupSearch}"/>
    </af:dialog>
        </af:popup>
<af:selectManyListbox label="Label 1" id="sml1" partialTriggers="cb5"
                        value="#{viewScope.TestBean.lovValue}"
                  autoSubmit="true"      valuePassThru="true"
                        binding="#{viewScope.TestBean.prp1}">
    <f:selectItems value="#{viewScope.TestBean.actualList}" id="si1"
                   binding="#{viewScope.TestBean.selectedItems}"/>
</af:selectManyListbox>
<af:commandButton text="get selected values" id="cb3"
                    actionListener="#{viewScope.TestBean.getSelectedValues}"
                    partialSubmit="true"/>
<af:commandButton text="remove selected" id="cb4"
         partialSubmit="true"           actionListener="#{viewScope.TestBean.removeSelectedValues}"/>
</jsp:root>
TestBean.java
package com.demo.view;
import java.util.ArrayList;
import java.util.Iterator;
import java.util.List;
import javax.faces.component.UISelectItems;
import javax.faces.event.ActionEvent;
import javax.faces.model.SelectItem;
import oracle.adf.model.BindingContext;
import oracle.adf.model.binding.DCBindingContainer;
import oracle.adf.model.binding.DCIteratorBinding;
import oracle.adf.view.rich.component.rich.RichPopup;
import oracle.adf.view.rich.component.rich.data.RichTable;
import oracle.adf.view.rich.component.rich.input.RichSelectManyListbox;
import oracle.adf.view.rich.context.AdfFacesContext;
import oracle.adf.view.rich.event.DialogEvent;
import oracle.jbo.Key;
import oracle.jbo.Row;
import oracle.jbo.RowSetIterator;
import org.apache.myfaces.trinidad.model.RowKeySet;
public class TestBean {
private RichTable tsupportIssues;
private List<SelectItem> lovValue;
private List<SelectItem> actualList;
private RichSelectManyListbox prp1;
private List valuesChoosed = new ArrayList();
private UISelectItems selectedItems;
private RichPopup searchSupplierPopup;
    public TestBean() {
    super();
public void setTsupportIssues(RichTable tsupportIssues) {
    this.tsupportIssues = tsupportIssues;
public RichTable getTsupportIssues() {
    return tsupportIssues;
public void testMethod(ActionEvent actionEvent) {
    // Add event code here...
    // For learning purposes - show Select Many Button clicked
     System.out.println("Select Many Button has been Clicked");
    // // RowKeySet Object can hold the selected rows from a user as follows
    RowKeySet rksSelectedRows =         this.getTsupportIssues().getSelectedRowKeys();
    // Iterator object provides the ability to use hasNext(), next() and remove() against the selected rows
    Iterator itrSelectedRows = rksSelectedRows.iterator();
    // Get the data control that is bound to the table - e.g.
    // OpenSupportItemsIterator
    DCBindingContainer bindings =         (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
    DCIteratorBinding dcIteratorBindings =         bindings.findIteratorBinding("findAllContactsIterator");
    // Information from binding that is specific to the rows
    RowSetIterator rsiSelectedRows =         dcIteratorBindings.getRowSetIterator();
    // Loop through selected rows
    int i=1;
    while (itrSelectedRows.hasNext()) {
      // Get key for selected row
      Key key = (Key)((List)itrSelectedRows.next()).get(0);
      // Use the key to get the data from the above binding that is related to the row
      Row myRow = rsiSelectedRows.getRow(key);
      // Display attribute of row in console output - would generally be bound to a UI component like a Label and or used to call another proces
      System.out.println(myRow.getAttribute("name"));
      valuesChoosed.add(myRow.getAttribute("name"));
//        actualList = new ArrayList<SelectItem>();
//        String j = Integer.toString(i);
//        actualList.add(new SelectItem(j, (String)myRow.getAttribute("name")));
//      i++;
       searchSupplierPopup.hide();
      AdfFacesContext.getCurrentInstance().addPartialTarget(prp1);
public void setLovValue(List<SelectItem> lovValue) {
    this.lovValue = lovValue;
public List<SelectItem> getLovValue() {
    return lovValue;
public void setActualList(List<SelectItem> actualList) {
    this.actualList = actualList;
public List<SelectItem> getActualList() {
    actualList = new ArrayList<SelectItem>();
    if(valuesChoosed.size()!=0){
    for(int i=0;i<valuesChoosed.size();i++){
      actualList.add(new SelectItem(valuesChoosed.get(i), (String)valuesChoosed.get(i)));
    else{
      actualList.add(new SelectItem("1","Select One"));
    return actualList;
public void setPrp1(RichSelectManyListbox prp1) {
    this.prp1 = prp1;
public RichSelectManyListbox getPrp1() {
    return prp1;
public void setValuesChoosed(List valuesChoosed) {
    this.valuesChoosed = valuesChoosed;
public List getValuesChoosed() {
    return valuesChoosed;
public void getValues(ActionEvent actionEvent) {
    // Add event code here...
    for(int i=0;i<valuesChoosed.size();i++){
      System.out.println(valuesChoosed.get(i));
public void getSelectedValues(ActionEvent actionEvent) {
    // Add event code here...
     for(int i=0;i<this.getLovValue().size();i++){
         System.out.println("Selected Value:"+this.getLovValue().get(i));
public void removeSelectedValues(ActionEvent actionEvent) {
    // Add event code here...
public void setSelectedItems(UISelectItems selectedItems) {
    this.selectedItems = selectedItems;
public UISelectItems getSelectedItems() {
    return selectedItems;
    public void setSearchSupplierPopup(RichPopup searchSupplierPopup) {
        this.searchSupplierPopup = searchSupplierPopup;
    public RichPopup getSearchSupplierPopup() {
        return searchSupplierPopup;
    public void cancelPopupSearch(ActionEvent actionEvent) {
        // Add event code here...
        searchSupplierPopup.hide();
    public void searchSupplier(ActionEvent actionEvent) {
        // Add event code here...
        RichPopup.PopupHints hints = new RichPopup.PopupHints();
        searchSupplierPopup.show(hints);
package com.demo.view;
import java.util.ArrayList;
import java.util.Iterator;
import java.util.List;
import javax.faces.component.UISelectItems;
import javax.faces.event.ActionEvent;
import javax.faces.model.SelectItem;
import oracle.adf.model.BindingContext;
import oracle.adf.model.binding.DCBindingContainer;
import oracle.adf.model.binding.DCIteratorBinding;
import oracle.adf.view.rich.component.rich.RichPopup;
import oracle.adf.view.rich.component.rich.data.RichTable;
import oracle.adf.view.rich.component.rich.input.RichSelectManyListbox;
import oracle.adf.view.rich.context.AdfFacesContext;
import oracle.adf.view.rich.event.DialogEvent;
import oracle.jbo.Key;
import oracle.jbo.Row;
import oracle.jbo.RowSetIterator;
import org.apache.myfaces.trinidad.model.RowKeySet;
public class TestBean {
private RichTable tsupportIssues;
private List<SelectItem> lovValue;
private List<SelectItem> actualList;
private RichSelectManyListbox prp1;
private List valuesChoosed = new ArrayList();
private UISelectItems selectedItems;
private RichPopup searchSupplierPopup;
    public TestBean() {
    super();
public void setTsupportIssues(RichTable tsupportIssues) {
    this.tsupportIssues = tsupportIssues;
public RichTable getTsupportIssues() {
    return tsupportIssues;
public void testMethod(ActionEvent actionEvent) {
    // Add event code here...
    // For learning purposes - show Select Many Button clicked
     System.out.println("Select Many Button has been Clicked");
    // // RowKeySet Object can hold the selected rows from a user as follows
    RowKeySet rksSelectedRows =         this.getTsupportIssues().getSelectedRowKeys();
    // Iterator object provides the ability to use hasNext(), next() and remove() against the selected rows
    Iterator itrSelectedRows = rksSelectedRows.iterator();
    // Get the data control that is bound to the table - e.g.
    // OpenSupportItemsIterator
    DCBindingContainer bindings =         (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
    DCIteratorBinding dcIteratorBindings =         bindings.findIteratorBinding("findAllContactsIterator");
    // Information from binding that is specific to the rows
    RowSetIterator rsiSelectedRows =         dcIteratorBindings.getRowSetIterator();
    // Loop through selected rows
    int i=1;
    while (itrSelectedRows.hasNext()) {
      // Get key for selected row
      Key key = (Key)((List)itrSelectedRows.next()).get(0);
      // Use the key to get the data from the above binding that is related to the row
      Row myRow = rsiSelectedRows.getRow(key);
      // Display attribute of row in console output - would generally be bound to a UI component like a Label and or used to call another proces
      System.out.println(myRow.getAttribute("name"));
      valuesChoosed.add(myRow.getAttribute("name"));
//        actualList = new ArrayList<SelectItem>();
//        String j = Integer.toString(i);
//        actualList.add(new SelectItem(j, (String)myRow.getAttribute("name")));
//      i++;
       searchSupplierPopup.hide();
      AdfFacesContext.getCurrentInstance().addPartialTarget(prp1);
public void setLovValue(List<SelectItem> lovValue) {
    this.lovValue = lovValue;
public List<SelectItem> getLovValue() {
    return lovValue;
public void setActualList(List<SelectItem> actualList) {
    this.actualList = actualList;
public List<SelectItem> getActualList() {
    actualList = new ArrayList<SelectItem>();
    if(valuesChoosed.size()!=0){
    for(int i=0;i<valuesChoosed.size();i++){
      actualList.add(new SelectItem(valuesChoosed.get(i), (String)valuesChoosed.get(i)));
    else{
      actualList.add(new SelectItem("1","Select One"));
    return actualList;
public void setPrp1(RichSelectManyListbox prp1) {
    this.prp1 = prp1;
public RichSelectManyListbox getPrp1() {
    return prp1;
public void setValuesChoosed(List valuesChoosed) {
    this.valuesChoosed = valuesChoosed;
public List getValuesChoosed() {
    return valuesChoosed;
public void getValues(ActionEvent actionEvent) {
    // Add event code here...
    for(int i=0;i<valuesChoosed.size();i++){
      System.out.println(valuesChoosed.get(i));
public void getSelectedValues(ActionEvent actionEvent) {
    // Add event code here...
     for(int i=0;i<this.getLovValue().size();i++){
         System.out.println("Selected Value:"+this.getLovValue().get(i));
public void removeSelectedValues(ActionEvent actionEvent) {
    // Add event code here...
    for(int i=0;i<this.getLovValue().size();i++){
        System.out.println("Selected Value:"+this.getLovValue().get(i));
        System.out.println(this.getLovValue().remove(i));
      AdfFacesContext.getCurrentInstance().addPartialTarget(prp1);
public void setSelectedItems(UISelectItems selectedItems) {
    this.selectedItems = selectedItems;
public UISelectItems getSelectedItems() {
    return selectedItems;
    public void setSearchSupplierPopup(RichPopup searchSupplierPopup) {
        this.searchSupplierPopup = searchSupplierPopup;
    public RichPopup getSearchSupplierPopup() {
        return searchSupplierPopup;
    public void cancelPopupSearch(ActionEvent actionEvent) {
        // Add event code here...
        searchSupplierPopup.hide();
    public void searchSupplier(ActionEvent actionEvent) {
        // Add event code here...
        RichPopup.PopupHints hints = new RichPopup.PopupHints();
        searchSupplierPopup.show(hints);
Thanks,
A. Abhijit

How to retrieve the max value from a cursor in procedure

Hi,
In a procedure, I defined a cursor:
cursor c_emp is select empno, ename, salary from emp where ename like 'J%';
but in the body part, I need to retrieve the max(salary) from the cursor.
could you please tell me how I can get the max value from the cursor in the procedure.
Thanks,
Paul

Here is one sample but you should just get the max directly. Using bulk processing should be a last resort.
DECLARE
CURSOR c1 IS (SELECT * FROM emp where sal is not null);
TYPE typ_tbl IS TABLE OF c1%rowtype;
v typ_tbl;
max_sal number;
BEGIN
OPEN c1;
max_sal := -9999999999999;
LOOP                                                 --Loop added
    FETCH c1 BULK COLLECT INTO v LIMIT 3; -- process 3 records at a time
        -- process the records
       DBMS_OUTPUT.PUT_LINE('Processing ' || v.COUNT || ' records.');
        FOR i IN v.first..v.last LOOP
             if v(i).sal > max_sal then
               max_sal := v(i).sal;
             end if;
            DBMS_OUTPUT.PUT_LINE(v(i).empno);
        END LOOP;
    EXIT WHEN c1%NOTFOUND;
END LOOP;
DBMS_OUTPUT.PUT_LINE('Max salary was: ' || max_sal);
END;
Processing 3 records.
7369
7499
7521
Processing 3 records.
7566
7654
7698
Processing 3 records.
7782
7788
7839
Processing 3 records.
7844
7876
7900
Processing 2 records.
7902
7934
Max salary was: 5000

How to read the tag values sent by PCo to MII transaction

Hi everybody,
I have an Agent created inside PCo and its listening to a data server. I have also created a notification object which triggers my MII Transaction (after certain condition is getting fulfilled).
Now, I want to pass certain values from PCo to MII using the notification object. For this I have tried 2 options:
1. I defined one input parameter in transaction of type 'XML'. But this did not work. When I used 'Tracer' to check the received values, it showed empty.
2. Since XML variable did not work, I tried with 'String' variable. It worked but the entire input data was in 'String' format.
Actually I used XML_Saver to save the string and given filename as '.xml'. When I opened that xml file, it was looking like this:
<<unable to write XML here>>
Considering the above 2nd option, how can I extract the particular 'Tag' values from XML string. Since the string is not in the format of 'Rowset/Row/Row', I cannot specifically assign/map those tag values to any other variable inside MII transaction.
===========

Hi, I was trying to post the xml string. It was not possible yesterday (because, SDN editor has converted xml part into some irregular string).
Now, I am trying to post the string by removing the special characters. Please try to understand it.
Now, my question is how to retrieve the CDATA value 5599999999 using xpath. Please help.
NotificationMessage
Body
Values
Expression1 type xsd string
CDATA 5599999999
/Expression1
/Values
/Body
Faults /
/NotificationMessage

How to capture the selected values from module pool dialog list box !

Hi experts,
Can anyone help me out in capturing the values from the list box.
i am able to set the values in the list box.But i am not able to capture the selected value from the list box. Always the list box name is getting as "space"
I also tried in using the FM "VRM_GET_VALUES" but it is retireving all the values. Is there is any flag for filttering out the selected value.
Your inputs are appreciated.
Thanks,
Vijay.

Along with the PBO and PAI event, add a POV event in the flow logic of the screen
DEMO_DROPDOWN_LIST_BOX -is a good demo example.
PROCESS ON VALUE-REQUEST.
FIELD structure_name-field_name MODULE create_dropdown_box.
In the report :
MODULE create_dropdown_box INPUT.
SELECT carrid carrname
                FROM scarr
                INTO CORRESPONDING FIELDS OF TABLE itab_carrid.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
       EXPORTING
            retfield        = 'CARRID'
            value_org       = 'S'
       TABLES
            value_tab       = itab_carrid
       EXCEPTIONS
            parameter_error = 1
            no_values_found = 2
            OTHERS          = 3.
IF sy-subrc <> 0.
ENDIF.
ENDMODULE.
In the layout, assign a Function Code , for eg : 'SELECTED' to the listbox and lets say name of the field is SDYN_CONN-CARRID. So in the PAI module,
MODULE user_command_0100 INPUT.
CASE ok_code.
    WHEN 'SELECTED'.
      MESSAGE i888(sabapdocu) WITH sdyn_conn-carrid.
ENDCASE.
ENDMODULE.
sdyb_conn-carrid will contain your selected field

How to read the field type from field id of DynamicFldTbl

Hi,
In my application, i am using DynamicFldTbl, whch parses FML32 field table definition file. My field table definition file contains information about field names and its types.
I checked the API of DynamicFldTbl and didn't find any API to get the field type from field it.
Any way to read the field type from field id?
Thanks in advance
Raguraman

Hi Raguraman,
Once you have the field table, you can then create an FML32 buffer (TypedFML32) using the constructor that takes a field table, and then use the Fldtype() method on the specific field ID you wish to get the type of. I know this is sort of tedious and we should provide Fldtype() and some others on the field table class directly.
Regards,
Todd Little
Oracle Tuxedo Chief Architect

ECC5 How to read the stored value from Team Viewer

Similar Messages

Maybe you are looking for