ECCN number for Sun Studio 10

Hi,
I can not find "Sun Studio 10" as a product in the Sun Software Export Matrix:
http://www.sun.com/sales/its/software/software.html
Anyone that knows which ECCN number to use in case you are shipping libraries from Sun Studio 10?
The library I have in mind is Tools.h++.

Actually, the implementation of -xpagesize and its friends will not be available on x86 until the next release. Sorry for the confusion.

Similar Messages

My serial number for Logic Studio doesn't work. I used one from a different box and it worked. How can I get a new number?

My serial number for Logic Studio doesn't work. I used one from a different box and it worked. How can I get a new number?

http://support.apple.com/kb/TS2005
http://support.apple.com/kb/HT1861
https://ssl.apple.com/support/proapps/serialnumbers/

How do I change a serial number for FCP Studio entered in error

I recently had to reinstall everything and I used the serial number for a co-worker's software by mistake. I have the right serial number, but when I try to re-install, the pane for entering the serial number never comes up and I end up with the same problem. I've tried deleting everything, including the p-list, before re-installing. I've also downloaded Preference Manager for that.

look for the FINAL CUT STUDIO SYSTEM ID in your hard drive>library>Application Support>ProApps
Drag it out of the folder into the trash and relaunch

Subversion support for Sun Studio 11 IDE

Hi there,
has anybody succeeded in using the Sun Studio 11 IDE with the Subversion SCM system? I searched the web for informations about this but didn't find anything.
Thanks for your help!
Jens Siebert

Jens,
The subversion module in netbeans is based on a current version
of netbeans (I'm not sure exactly which one). It very unlikely to work
with the Sun Studio 11 IDE because the Sun Studio 11 IDE is based
on a much older version of NetBeans (3.5.1 with modifications).
The next major release of Sun Studio should use the current
NetBeans release. It should work with the Subversion module.
Unfortunately, we won't be releasing for quite a while.
Gordon

How to report bugs for Sun Studio 12 update 1?

I want to report a bug for the Sun Studio 12u1 C compiler, but bugreport.sun.com doesn't know about Sun Studio 12u1. The latest release know is SS12.
Furthermore, the form doesn't allow to attach additional files, e.g. sources and other information needed to reproduce the problem.
Since we have a valid service support contract with Sun, I used the official channel via the member support center, on January 15. Now, one month later, there is still no answer - and searching the databases both on sunsolve and bugreport.sun.com show, that my report hasn't gotten that far, yet.
I really like Sun Studio, and I use it both for research and education, but reporting issues is really a problem. This somehow spoils the fun, both for the end users and the developers of a really great product!
So the big question is: What is the best and quickest way to get bugs reported?
Regards,
Bernd

If you have a support contract, the best way is to report via official channel; this is the only way to ensure that the bug is fixed in a patch for already released product. The fact that you can't find your report on sunsolve and bugreport.sun.com does not mean anything: not all bugs are public for obvious reasons.
I think you should request an update via the same official channel; if you get nothing in a reasonable time (a day, I think), please report back here, we'll try to find out what's going on.

Patches for Sun Studio 12 Update 1

Dear all,
I have recently installed Sun Studio 12 Update 1 on an x86 system and have some questions pertaining to the required patches. According to my understanding of the text on the homepage for SS12U1 (http://developers.sun.com/sunstudio/downloads/patches/ss12u1_patches.jsp) it should be possible to download these also without a service contract, but this does not seem to be possible. The SunOS 5.10_x86: Microtasking libraries (libmtsk) patch 120754-6 distributed with the SS12U1 does not seem to be sufficient for 64-bit OpenMP programs. For correct functionality of the compiler patch 120754-7 appears to be needed.
My question thus is if it should be possible to access the required Sun Studio 12 Update 1 patches without a service contract?
Any help regarding this is highly appreciated.

Tthe recent lockdown of all patches by Oracle, making them available only under a support contract, makes the issue of Sun Studio 12.1 patches discussed here quite important. If 120754-07 is required for proper SS12.1 functionality, then users without support contracts must not upgrade their systems to more recent Solaris versions, as SS12.1 will have to be re-installed, and the 07 patch will be unavailable. When will SS12.2 or SS13 (?) be released? If Oracle really wants to make some money, they will never release any further SS updates, thus requiring customers to buy contracts to get the darn patch.
Check these prices for SS support contracts:
Sun Studio 12 Update 1 Standard Sun Software Service Plan 1-year
$1,015.00
Sun Studio 12 Update 1 Premium Sun Software Service Plan 1-year
$1,218.00
http://developers.sun.com/sunstudio/downloads/index.jsp

Can you get a new serial number for Logic Studio?

so i just bought Logic Studio from a friend and i successfully installed it onto my mid 2012 13-inch MacBook Pro (entry level). Problem is that after the software was installed, i opened one of the applications that came with the bundle (Logic Pro) and it requested me to enter my serial number. I typed the right one and it didnt let me in. I tried to do that with all the other applications that came with Logic Studio but none of the apps let me in even though i tried more than a bunch of times.
So my question is: can you get a NEW serial number?
if not, then is there another solution that wont require me to download hack files?
Thanks.
-Jackson

http://support.apple.com/kb/TS2005
http://support.apple.com/kb/HT1861
https://ssl.apple.com/support/proapps/serialnumbers/

Serial Number for Logic Studio

Which number on the original software box is the serial number. I have entered both that appear on the box but neither is accepted.

They're on the INSTALLATION booklet not the box itself. 2 sets of stickers so you can peel them off and stick 'em somewhere else.
Cheers
Eddie

JATO 2.0 Licensing for Sun ONE Studio 4 Update 1 EE

I have a serial number for Sun ONE Studio 4 EE which I'm also able to use
for Sun ONE Studio 4 Update 1 EE. I downloaded JATO 2.0 as offered in the
Studio Update Center. It asked for a serial number so I tried my Studio
serial number but it didn't work. Should it have? Are you giving away JATO
with the EE version of Studio?
- Jim
James Watkin
The Anderson School at UCLA
james.watkin@a...
Voice: 1-310-825-5030
Fax: 1-310-825-4835

In order to compile from the IDE, you need a few things
1. If the class is in a jar you must mount the jar in the filesystem -- that is, the jar file must be a top node (not under a node) in the Filesystems window. If this is not the case, use File > Mount Filesystem > Archive Files.
2. If the class is not in a jar, mount the directory above the package root. For example, if you have c:\myWork\src\javax.microedition.lcdui.game then mount c:\myWork\src
3. You have to either have an appropriate import statement or use the fully qualified class name.
Import statement:
import javax.microedition.lcdui.game.*;
or
javax.microedition.lcdui.game.someName x;
More information about package problems can be found at http://swforum.sun.com/jive/thread.jspa?forumID=78&threadID=22820
It has a web-tier bent but some of this info applies to Java apps.

General and specific questions on the applicability of Sun Studio 11

Hi. In an e-mail letter from Sun Microsystems I read about Sun Studio 11 to "utilize its record-setting parallelizing compilers." From this message I was attracted by the possibility of adding something like parallel processing, not by changing the processor (hardware), but by adding Sun-Studio-11 software to a Linux operating system. Now I already have a Fortran compiler, the Intel Fortran Compiler for Linux, which is free and can handle Cray-style pointers, a feature hard to find in a free Fortran compiler.
1a. So for the most basic of questions, without having parallel-processing hardware, just an ordinary processor [a 1-GigaHertz (GHz) Advanced MicroDevices Duron central processing unit, in my case], is it possible to have parallel processing and thereby increase one's computing speed by installing Sun Studio 11 in a Linux operating system?
1b. If so, by what factor could one expect the speed of computation to increase over not having Sun Studio 11 installed? (If the gain in speed is dependent on the type of computations being performed, I imagine possibly using a Fortran code to perform numerical calculations using and perhaps searching for minima or maxima in a two-or-more-dimensional surface. So please give me an idea of the sort of gain in speed one could expect for these two types of activites, calculations using formulas and searches for minima and maxima among already-computed quantities.)
1c. Again if so, how could one just by adding software have parallel processing without two or more hardware processors? In other words, what is the basic working principle of the software to make the simultaneous performance of multiple tasks (multitasking or parallel processing) possible?
2a. Does Sun Studio 11 include a Fortan compiler?
2b. If so, must one use it to have parallel processing with Sun Studio 11?
2c. Or will the Intel Fortran Compiler for Linux work with Sun Studio 11 to have a parallel processing capability?
Concerning hardware requirements I read that Sun Studio 11 requires a minimum of 512 MegaBytes (MB) of memory, presumably Random Access Memory (RAM). My Hewlett-Packard, ZE1110, Pavilion, notebook computer has 256 MB of RAM, but is expandable to a maximum of 512 MB of RAM. So in this respect it is in principle at least technically possible for me to meet the minimum system requirement for Sun Studio 11 with my computer, if I choose to increase its RAM. Somehow accommodating the cost of such a RAM addition, including whether one may have to buy two, matching, 256-MB RAM modules or just presumably one additional 256-RAM module, is another requirement. But before spending money for such an upgrade, one should first thoroughly investigate other matters to determine if other things are going to work and to determine what gain, if any, one could expect in computing speed with Sun Studio 11 and an additional 256 MB of RAM; then decide, based on such data, whether the purchase is personally worth the money or not. That's one motivation behind this posting; another motivation is for me to learn some things.
Lastly I would like to here thank whoever was thoughtful enough to provide the Sun Download Manager (SDM) 2.0, which allows the pausing and resumption of the 207-MB download studio11-lin-x86.tar.bz2 for the Linux version of the Sun Studio 11! Using a slow, dialup, Internet connection like mine having a maximum speed of 28.8 kilobits/second, this makes it possible to download that file over a number of Internet sessions instead of having to have an uninterrupted, 19-or-more-hour Internet session. Besides the invconvenience of tying up one's telephone line for that long a time, it might be even be difficult to have such an uninterrupted Internet session for that long a time. I have at least started such a download using the SDM 2.0 potentially over multiple Internet sessions. Whether or not I carry it out to completion could depend on whether everything looks good with Sun Studio 11 for my particular situation. Thanks in advance for your help.

Thanks for both of your postings here. I'm mostly trying to learn something here.
From Maxim Kartashev: "For example, if one thread (or process, or lwp) frequently performs an I/O operation, then the other thread (process, lwp) can utilize processor resources to perform, say, some computations while first one waits for operation to complete."
I think I might understand what you meant above. I guess lwp in the above context stands for light-weight process. And I think you may be talking about a potential gain in speed with just one, ordinary processor. I guess you meant that one program, or perhaps group of programs, could perform input/output processes at the same time it is performing calculations because different parts of the processor are being used in these two groups of processes. Then on "while first one waits for operation to complete" I guess you meant that if the input/output operations finish before the computations finish, then thread 1 that was performing the input/output operations will have to wait until the current computations ordered by thread 2 are complete before thread 1 can utilize the computational resources for its own computations; i.e., two threads can't use the same computational resources of an ordinary processor at the same time. How is my thinking so far, Maxim, right, partly right, or all wrong?
Now if the above thinking of mine is right, then it appears that one could have some gain in speed doing things like you suggest with just one, ordinary processor. And if so, I imagine that the gain could be a maximum of a factor of two for a program that requires spending as much time in input and output as it does in computation; i.e., keeping both the computational and input/output resources working all of the time without the input/output resources waiting on the computational resources or vice versa. How is my thinking here?
If the above thinking is correct, just for purposes of discussion with just one, ordinary processor, not a dual processor, and a program which does nothing but computations there would be no gain in speed using Sun Studio 11 and a Fortran compiler over not using Sun Studio 11. In other words, to increase the speed of computation one would have to buy a faster computer, buy parallel processing hardware for an existing computer and use parallel-processing software, or somehow figure out how to harness two or more computers to work for you at the same time with instructions from one piece or perhaps set of pieces of code set up for parallel processing using two or more different computers. The latter case would be a computer analogue or "two 'heads' are better than one," not human heads, but computers. How is my thinking here?
Here I am still assuming that it is possible for one processor to be used to do two different kinds things at once. However, I don't see how one Fortran program could instruct two things to be done at once. This is because I have not seriously studied parallel processing, I suppose. That is I am used to a sequential set of instructions that proceed from top to botton down the lines of code; i.e., one instruction or line of code can't be executed until the line of code before it has been completely executed. That is the computing "world" with which I am familiar. So how about someone here teaching me with an example of parallel-processing Fortran code how parallel processing works, explaining what instruction or group of instructions tells the computer to execute input and computational instructions at the same time?
Based on the encouraging information from one or more other people I have been able to use the Intel Fortran for Linux 8.1.024, if I remember correctly, in a computer with a 1-GigaHertz (GHz), Advanced MicroDevices (A.M.D.), Duron Processor. So this is at least one case where it is not essential to have an Intel processor to use the Intel Fortran Compiler for Linux 8.1.024.
Is the Sun Fortran compiler free for personal use? And can it handle Cray-style pointers?

Installing Sun Studio 12 on Ubuntu 8.04

When I try to install Sun Studio 12 with the graphical installer, I get a message half was through that Java is not installed. In my case Sun's Java was already installed. I tell the Sun Studio installer to do the update and it finished what it was doing. After the install is done, I found that the Sun Studio executable is missing, so it looked like the installation did not work. What version of Java is Sun Studio expecting and does it need to be tied to a specific path? Is there a known method for installing Java for Sun Studio 12?
After this I uninstalled Java and Netbeans and started the system prep tool, which correctly said I was missing netbeans and java. I had the system prep tool install netbeans successfully but I get this message when trying to install java:
error: Failed dependencies:
glibc >= 2.1.2-11 is needed by jdk-1.5.0_09-fcs.i586
sh-utils >= 2.0-1 is needed by jdk-1.5.0_09-fcs.i586
fileutils >= 4.0-8 is needed by jdk-1.5.0_09-fcs.i586
gawk >= 3.0.4-1 is needed by jdk-1.5.0_09-fcs.i586
textutils >= 2.0-2 is needed by jdk-1.5.0_09-fcs.i586
/bin/sh is needed by jdk-1.5.0_09-fcs.i586
Any suggestions?

I could not find any log files with error information from Express or Sun Studio 12. Any ideas?Not yet :-) Can you try to build and debug a sample project? Does it show the same problem?
I mean one of several sample projects, that are shipped with the Sun Studio IDE.
Start "sunstudio", from main menu: "File->New Project", select Samples->C/C++/Fortran->Welcome
Did you try to run compilers and other tools?
Please, make sure they work. For example, run the following commands:
cc -V
CC -V
f90 -V
collect -V
dbx -V
dmake -v
(Note: the last one is small "v")

Sun studio 12 installation problem on RHEL5 x86_64

Whenever I try to execute the batch installer for sun studio 12 I get the following error message:
./batch_installer --accept-sla
Exception in thread "Thread-1" java.awt.HeadlessException
at java.awt.dnd.DropTarget.<init>(libgcj.so.7rh)
at java.awt.dnd.DropTarget.<init>(libgcj.so.7rh)
at javax.swing.JComponent.<init>(libgcj.so.7rh)
at javax.swing.JPanel.<init>(libgcj.so.7rh)
at javax.swing.JPanel.<init>(libgcj.so.7rh)
at com.sun.wizards.core.WizardComponent.<init>(WizardComponent.java:159)
at com.sun.wizards.core.WizardComposite.<init>(WizardComposite.java:83)
at com.sun.wizards.core.WizardTreeManager.createWizardPanel(WizardTreeManager.java:890)
at com.sun.wizards.core.WizardTreeManager.<init>(WizardTreeManager.java:325)
at com.sun.wizards.core.CommandLineConsole.run(CommandLineConsole.java:75)
at java.lang.Thread.run(libgcj.so.7rh)
Task Failed: java.lang.NullPointerException
java.lang.NullPointerException
at java.lang.Class.isAssignableFrom(libgcj.so.7rh)
at java.util.ResourceBundle.tryBundle(libgcj.so.7rh)
at java.util.ResourceBundle.tryBundle(libgcj.so.7rh)
at java.util.ResourceBundle.getBundle(libgcj.so.7rh)
at java.util.ResourceBundle.getBundle(libgcj.so.7rh)
at com.sun.setup.util.wbResource.getString(wbResource.java:212)
at com.sun.setup.util.wbResource.getString(wbResource.java:132)
at com.sun.setup.util.setupInitializationTask.perform(setupInitializationTask.java:88)
at com.sun.wizards.core.Sequence.perform(Sequence.java:343)
at com.sun.wizards.core.SequenceManager.run(SequenceManager.java:226)
at java.lang.Thread.run(libgcj.so.7rh)
I've used the ./prepare_system to install all dependencies. Any suggestions?
Cheers

Please check version of java that is in your PATH. It should be JDK 1.5 or later.

Building NCAR Graphics 5.2.1 on Solaris 10 x86u9 under Sun Studio 10 (2005)

Hello,
I've got the following error when compiling ncar program with Sun
cc and f90 and /usr/ccs/bin/ld.
cc -ansi -O -I/usr/openwin/include -I/usr/include/X11 -DSYSV -
D_POSIX_SOURCE -D_XOPEN_SOURCE -DByteSwapped -Di386 -DNeedFuncProto -
c cl.c
cc: Warning: illegal option -nsi
cc: -a conflicts with -dy.
*** Error code 1
make: Fatal error: Command failed for target `cl.o'
After that i've changed the config/SolarisPC file and tried a build with gcc 3.4.3 and f90 but I got
ld fatal: library -lc not found.
I have an old box from 2001 which was under HCL of Solaris 8 x86.
The people at NCAR did not update their configuration files for Solaris 10 x86. The SolarisPC file is old and is using by default g77 as the fortran compiler. Could I mix gcc with f90 ? Which linker should I use in that case?
/usr/ccs/bin/ld or /usr/ucb/ld?

Please refer to the C Users Guide for details of cc command line options. All manuals for Sun Studio 12u1 are listed here:
http://download.oracle.com/docs/cd/E19205-01/index.html
There is no -ansi option in Sun/Oracle C, nor has there ever been. The compiler attempts to interpret it as -a followed by some other letters, which is why you get a complaint about -a. Remove the option.
Depending on what you expect from the -ansi option, either the default compiler behavior or the -Xc option should work. I suggest trying the default behavior (no -X option). Refer to the manual for details.
Always use the /usr/ccs/bin/ld linker, but you normally should not use the ld linker directly. If you mixing C and Fortran, use the f90 driver to do the linking; it knows what Fortran libraries need to be linked, depending on command line option. When linking a program using only C, use the cc driver to link. Some C command-line options require linking special system files; the cc and f90 drivers know the rules.
To mix Fortran with C, refer to the Fortran Users Guide. I recommend using the Studio C compiler when mixing code, not gcc. The requirements of gcc are not known to the f90 driver, but it does know the requirements of Studio C.
The schema for a mixed Fortran and C program is something like this:
cc -c f1.c f2.c <other options>
f90 -c f3.f90 f4.f90 <other options>
f90 -o myprog f1.o f2.0 f3.0 f4.0 <other options>

Need help building boost_1_37_0 on Solaris 10 U6 with Sun Studio 12

Hi,
Ok, please bear with me here. I've tried many different sets of instructions, and haven't had success with any of them (including the ones at http://blogs.sun.com/sga/category/Boost).
Operating System: Solaris 10 x86 U6
Compiler: Sun Studio 12 (SUNCC version 5.9)
Boost version: 1.37.0
The ONLY part of boost that I need is regex. I've never built external libraries before and building boost on Solaris seems a rather daunting task. So, could someone please explain, as clearly as possible, how do I build the boost::regex library using SUNCC?
I know this is a very broad topic, but since I haven't had any luck with any existing instructions that google turns up, alas I am here.
Thanks in advance if someone can help me,
~Slow
Note: I don't need any special options, any special, non-standard install paths, nothing. Just a straight, stock, boost install.
Edited by: SlowToady on Nov 10, 2008 2:18 PM

First, be sure you have the current patches for Sun Studio 12. You can get them here:
http://developers.sun.com/sunstudio/downloads/patches/
Please install the current C++ compiler patch, the C compiler patch, and the common back-end compiler patch.
You should then be able to build BOOST 1.37.0. The only problem I know of has been filed as CR 6767881, which results in an incorrect complaint about a constructor not being accessible. But I don't think that one affects regex.
If you running into some other problem after patching the compiler, please post enough detail that we can investigate it.
Questions about how to build just a portion of BOOST are probably best addressed to a BOOST forum.

Sun Update Manager attempts to patch wrong arch of Sun Studio 12

Hi,
I'm having patching problems as mentioned here: http://forum.java.sun.com/thread.jspa?threadID=5198127&tstart=0
However, I recently (last week) installed an x86_64 version of Sun Studio 12 on my sparc NFS server as documented here: http://docs.sun.com/app/docs/doc/820-0274/6nc1b7u4r?a=view
(Installing the Sun Studio 12 Software on a Solaris Server for Use by Clients With a Different Architecture)
The clients are Sun Solaris 10 11/06 x86_64.
After running "check for updates", Sun Update Manager today returned 9 patches for Sun Studio 12. All of these patches appear to be for sparc architecture:
126995-01
124861-02
124867-01
124863-01
127000-01
127143-01
126503-01
127001-01
124872-01
My question is, why doesn't Sun Update Manager realize that I installed the x86_64 version of Sun Studio 12 (for NFS exporting) and give me the x86_64 version of these patches?
Or am I missing something? How does the procedure "Installing the Sun Studio 12 Software on a Solaris Server for Use by Clients With a Different Architecture" result in the package system on the NFS server being aware of the correct arch version of Sun Studio 12?
This should explain more:
(/opt/x86_64/SUNWspro is my NFS share)
# pwd
/opt/x86_64/SUNWspro
# ls -l
total 62
lrwxrwxrwx 1 root root 15 Aug 12 18:32 LEGAL-SS12 -> prod/LEGAL-SS12
drwxr-xr-x 2 root sys 25 Aug 12 18:33 READMEs
lrwxrwxrwx 1 root root 9 Aug 12 18:31 atd1 -> prod/atd1
drwxr-xr-x 3 root sys 95 Aug 12 18:33 bin
drwxr-xr-x 5 root sys 5 Aug 12 18:32 contrib
drwxr-xr-x 2 root sys 3 Aug 12 18:32 docs
drwxr-xr-x 2 root sys 7 Aug 12 18:33 examples
drwxr-xr-x 2 root sys 5 Aug 12 18:32 include
drwxr-xr-x 3 root sys 3 Aug 12 18:30 inventory
drwxr-xr-x 9 root sys 40 Aug 12 18:33 lib
drwxr-xr-x 12 root sys 13 Aug 12 18:30 man
drwxr-xr-x 2 root root 4 Aug 12 19:46 nb-install
drwxr-xr-x 21 root sys 21 Aug 12 18:32 prod
drwxr-xr-x 5 root sys 5 Aug 12 18:33 sfw
# uname -a
SunOS <hostname> 5.10 Generic_125100-10 sun4u sparc SUNW,Sun-Fire-V440
# cd bin
# ls
CC cscope er_print gvim smctl visu
CCadmin ctc er_rm indent ss_attach visuroot
amd64 ctcr er_src lint sunCC whatdir
analyzer ctrace etags lock_lint sunas xdcapture
b2m cxref f77 ootags sunc89 xdconfig
bcheck dbx f90 prepare_system sunc99 xdesigner
bil2xd dem f95 ptclean suncc xdhelp
c++filt dmake fbe rcs-checkin sunf77 xdrecord
c89 dumpstabs fdumpmod rtc_patch_area sunf90 xdreplay
c99 dwarfdump fpp rxm sunf95 xdroot
cb ellcc fpr rxs sunstudio xdtosj
cc er_archive fsplit sbcleanup tcov xemacs
cc-5.0 er_cp gil2xd sbenter tha xemacs-mule
cflow er_export gnuattach sbquery uil2xd
checkjava er_kernel gnuclient sbtags version
collect er_mv gnudoit smallxd version-5.0
# file f95
f95: ELF 32-bit LSB executable 80386 Version 1 [FPU], dynamically linked, stripped
I obviously have the i386 version of f95 sitting on my sparc server. The x86 clients are happy with it - works great, but I want to be able to patch it.
Can anyone tell me how to apply patches to my Sun Studio 12 installation in this case?
Thanks,
Phil

its probably best to get your other patching issue sorted out first before going any further with this. it may turn out that fixing the problem of smpatch analyze recommending already installed patches will also fix this problem

ECCN number for Sun Studio 10

Similar Messages

Maybe you are looking for