Eclipse (including 3.2): CVS avoiding update with Entries.Backup errors

Entries.Backup (even being harmless) causes Eclipse CVS to stop bringing new files.
Well, I use cvs since months ago, even with entries.backup errors (dont know why), even with new repositories (may be SUSE 9.3 bug), since I also reinstalled a new cvs version.
Using tortoiseCVS, when update throws this error of �cvs update: cannot rewrite Entries.Backup: permission denied�, Tortoise do write the new directories from the server to the client machine.
The same does not occur with Eclipse: with this same server configuration, Eclipse stop updating the files :(, so it does not bring new files.
I wanted to know when a update or fix will be available to that portion of CVS in Eclipse, because I�ve worked in an university and now in a project team, both of them (using SUSE) started to have Entries.Backup errors (actually, its a warning), but we were not able to use Eclipse with cvs because updates was not done, even the error being harmless.
So, Eclipse may bypass this error and do the update normally, but still showig a warning message.
Thanks
Ivan Aedler
Linux Support Team
Rio de Janeiro - Brazil

Similar Messages

Can't update with 7 getting error message not connected to the Internet

Not sure what's going on with IPAD 2, can't download latest update. Error message telling me I'm not connected to the Internet. Do I need to change some settings!

Hi,
but only when I am trying to download Pages and Keynotes
You can download Pages and Keynote from here.
http://itunes.apple.com/us/app/id361285480?mt=8
http://www.apple.com/ipad/features/pages.html
If you click on: *Vist the app store* on those links, it will open iTunes.
You can verify the installation in the iTunes window under the Apps tab. Then click the Sync button bottom right side of the iTunes window.
Carolyn

Failed iMac updates with boot up errors

I own a iMac, which I have kept up to date and installed bootcamp on for my video games, it was all running fine until I tried to update it. Then it restarted like it always does after updates, then installed then it rebooted again and everytime after that when I boot up, it goes to the grey screen with the spinning gear and apple. This has happened once before, and when I went to the apple store they told me they didn't know what was wrong and instead of trying to fix it or find out what was wrong they said the best thing to do was to restore the whole computer and reinstall mac os x. just recently it happened again, and i did some research of my own... I found a lot of old blogs of the same thing happening to people a long time ago. They all said that it was a easy fix, and all they had to do was reinstall the latest software update in target disk mode. I finally got a firewire cord and tried to reinstall the software on to my comp (broken) from my brothers comp (normal). I started the install as normal, but when I went to select the destination for the install, it was basically telling me I couldn't due to the hard drive being read only.
I was wondering if there is a way to change this. If it helps, the windows partition set up through bootcamp still works, and i still have all of my install disks.
Thank You for any help!!!!!

Awesome Glad to hear!!
say this is maybe a back plane eprom of the chassis (BPE) that got wacked for whatever reason, very unusual.
you could try this:
go to rommon
rommon 1> priv
rommon 2> bpcookie
and just enter through all the entries, dont change anything just to update the crc
and that might resolve the issue.
like what I said, never happens as BPE is never written to unless manually done...
if doesnt resolve, do a TAC case and possibly ask for a replacement, but this is not a hw failure pers-e.
xander

While Running baseLine update with Endeca getting Error with ATG11

HI All,
While running the baseline update for endeca getting below error,Please help me to resolve this issue
[11.26.14 18:26:36] INFO: Checking definition from AppConfig.xml against existing EAC provisioning.
[11.26.14 18:26:39] INFO: Definition has not changed.
[11.26.14 18:26:39] INFO: Starting baseline update script.
[11.26.14 18:26:39] INFO: Acquired lock 'update_lock'.
[11.26.14 18:26:40] INFO: [ITLHost] Starting shell utility 'cleanDir_cas-output'.
[11.26.14 18:26:40] SEVERE: Error communicating with EAC agent while starting utility 'cleanDir_cas-output'.
Occurred while executing line 8 of valid BeanShell script:
5|    if (LockManager.acquireLock("update_lock")) {
6|      // clean directories
7| CAS.cleanCumulativePartials();
8|      Dgidx.cleanDirs();
9|
10|      // run crawl and archive any changes in dvalId mappings
11| CAS.runBaselineCasCrawl("CRS-last-mile-crawl");
[11.26.14 18:26:40] SEVERE: Caught an exception while invoking method 'run' on object 'BaselineUpdate'. Releasing locks.
Caused by java.lang.reflect.InvocationTargetException
sun.reflect.NativeMethodAccessorImpl invoke0 - null
Caused by com.endeca.soleng.eac.toolkit.exception.AppControlException
com.endeca.soleng.eac.toolkit.script.Script runBeanShellScript - Error executing valid BeanShell script.
Caused by com.endeca.soleng.eac.toolkit.exception.EacCommunicationException
com.endeca.soleng.eac.toolkit.utility.Utility start - Error communicating with EAC agent while starting utility 'cleanDir_cas-output'.
Caused by com.endeca.eac.client.EACFault
sun.reflect.NativeConstructorAccessorImpl newInstance0 – null
Thanks,
Mahesh Chinchure

It sounds like you might be working with Endeca Commerce products - this forum is for Endeca Information Discovery.
You might try posting your questions on one of these forums:
Oracle Commerce
Technical Questions

Can I retrieve data I had before I updated with a backup?

I just got a new iPhone 3Gs to replace a 3G that I lost. After I activated it, I received and sent a bunch of new text messages and added a few contacts. Then I synced it with my computer and used a backup that I had made on 7/14/09. I should've seen this coming, but that deleted all of the messages and contacts I received and made today. Is there any way to get those back?
Thanks.

No, they are gone for good.

Can an iPhone be updated with a backup file that is older than the newest available?

My husband has lost all of his iPhone information when he cleaned it off to start over, then saved a new backup that wiped out all his old info. Is there any way to go back to a previous backup to retrieve all his lost contact information?

Yeah, each column in the CSV needs to have a descriptive header. Here's what I used to quickly test that example script I posted above:
loginDetails.csv:
Server,User,Date
Server1,user1,8/12/2014 16:18
Server1,user2,3/21/2014 12:33
Server1,Admin,6/13/2013 15:34
Server2,user3,8/14/2014 7:34
Server2,Admin,11/14/2013 7:30
Server2,user4,8/12/2013 8:03
Server3,user5,8/14/2014 7:34
Server3,user1,7/14/2014 7:30
Server3,user3,6/12/2014 8:03
Server4,user5,8/14/2013 7:34
Server4,user2,6/12/2013 7:30
Server4,user3,2/12/2013 8:03
Output of example from above:
Under 3 Months - Server1 user1 8/12/2014 16:18
Over 3 Months - Server1 user2 3/21/2014 12:33
Over 3 Months - Server1 Admin 6/13/2013 15:34
Under 3 Months - Server2 user3 8/14/2014 7:34
Over 3 Months - Server2 Admin 11/14/2013 7:30
Over 3 Months - Server2 user4 8/12/2013 8:03
Under 3 Months - Server3 user5 8/14/2014 7:34
Under 3 Months - Server3 user1 7/14/2014 7:30
Under 3 Months - Server3 user3 6/12/2014 8:03
Over 3 Months - Server4 user5 8/14/2013 7:34
Over 3 Months - Server4 user2 6/12/2013 7:30
Over 3 Months - Server4 user3 2/12/2013 8:03
Don't retire TechNet! -
(Don't give up yet - 12,950+ strong and growing)

/usr/include/libusb-1.0/libusb.h error update with libusb1

Hi,
today I run pacman -Syu but I have problem with core/libusb instead libusb1 update
errore: impossibile eseguire l'operazione richiesta (file in conflitto)
libusb: /usr/include/libusb-1.0/libusb.h è già presente nel filesystem
libusb: /usr/lib/libusb-1.0.a è già presente nel filesystem
libusb: /usr/lib/libusb-1.0.so è già presente nel filesystem
libusb: /usr/lib/libusb-1.0.so.0 è già presente nel filesystem
libusb: /usr/lib/libusb-1.0.so.0.0.0 è già presente nel filesystem
libusb: /usr/lib/pkgconfig/libusb-1.0.pc è già presente nel filesystem
Si sono verificati degli errori, nessun pacchetto è stato aggiornato.
Try force update?
tnx

I tried bauerbill -Syu and it failed with the same errors. Using pacman -Syu instead, I was prompted for a replacement, I think it was to replace libusb1 with libusb and there were no errors.
Seems like its a common failure of pacman/libalpm wrappers.
Last edited by jowilkin (2010-12-08 09:57:36)

Need CVS plug in with weblogic portal 10.3

I tried to integrate the CVS plug in with Weblogic Portal 10.3 using software updates (Selecting Eclipse CVS Client 1.0.2.r33x), but getting the error - Weblogic Portal 10.3 requires feature "com.m7.nitrox(1.0.20)", or compatible
Can someone help me in CVS plug ins with weblogic portal 10.3.

ttam,
This is a bug, 8185869 (Check in Metalink) . that has been fixed in the Sunshine Release. In the meantime, here's the workaround from the bug report:
Download the plugin manually, and either 1) create an extension location on the file system from it and add that via Help|Software Updates|Manage Configuration, or 2) extract it to one of the workshop eclipse folders (i.e. tools/eclipse_pkgs/2.0/eclipse_3.3.2, tools/eclipse_pkgs/2.0/pkgs/eclipse, workshop_10.3/workshop4WP/eclipse, wlportal_10.3/eclipse).
Additionally, you can comment out the com.* import lines in your %BEA_HOME%\wlportal_10.3\eclipse\features\com.bea.wlp_10.3.0\feature.xml, like this:
<requires>
<import plugin="org.eclipse.core.runtime" version="3.3" match="compatible"/>
<import plugin="org.eclipse.ui" version="3.3" match="compatible"/>

</requires>
Then restart Workshop.
cheers
vijay

Need advice on avoiding problems with new MacPro

As a long time Windows user I'm now staring into the abyss with a new MacPro quad.
It was ordered without a monitor - arrived yesterday and I purchased a new Samsung 226BW - hooked everything up and it worked right on the first try.
My question is, are there any common mistakes that I might fall into with a new machine?
What to watch out for?
Precautions that I might take?
MacPro 3.0 Quad Mac OS X (10.4.7)

Good maintenance is important:
Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.0 is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation. TechTool Pro 4.5.2 is Intel Mac compatible; Drive Genius is similar to TechTool Pro in terms of the various repair services provided. The current version, 1.5.1, is Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.
OS X automatically defrags files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old logfiles and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. PsynchX 2.1.1 and RsyncX 2.1 (Freeware)
6. Carbon Copy Cloner (Freeware - 3.0 is a Universal Binary)
7. SuperDuper! (Commercial)
The following utilities can also be used for backup, but cannot create bootable clones:
1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
2. Toast
3. Impression
4. arRSync
Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at www.versiontracker.com and www.macupdate.com.

Batch Characteristic not updating with result for linked MIC

Hi,
I have created a MIC and linked to a batch characteristic i.e. potency and included the characteristic in a specific batch class. This MIC is part of the inspection plan for a certain material.
If I generate a lot of origin 01 and 09 for the material and record a result for the MIC and apply a UD, the batch characteristic is not updated with the result recorded in the batch master record..
If I generate a lot origin 89 for the same material, when the result is recorded for the MIC and apply a UD the batch characteristic is updated with the mic value in the batch master record.
Can you help regards?

Ok. I am a little bit further.
I put a trace (ST05) on the result recording and I find a difference between 4.7 and ECC6.0.
In ECC6.0 I've an deletion in table "AUSP". This deletion isn't performed in the 4.7 system.
Hope that this can help to solve my problem.
Regards,
René
@ Mayank
Above, all the master data and customizing is mentioned to transfer the result to the batch classification
Edited by: Rene Fuhner on Jul 30, 2010 7:03 PM

Purchase Order history is not updated with Invoice number

Hello Experts ,
Please suggest some inputs/solution for my problem.
Scenarios is :
PO --> SO --> Invoice
I am creating the invoice with the medium EDI , when I click on Save button IDOC is generated with the message " IDoc 'xxxxxxxxxxxxx' was created and forwarded for transmission " and it showing the status as 03 i.e, The IDoc was sent to an R/3 System or an external program via a transactional RFC ...but the problem is if I got to the Purchase Order history Its not updated with the Invoice number.
What could be the problem , please suggest.

Hi!
I'm not sure, in which process you link PO and SO. There are some different ways, which are totally different scenarios - if you need help here, describe more detailed.
Your invoice is probably only created with reference to SO, so check the invoice itself. In this case also the SO history should include the invoice.
Regards,
Christian

IPhone 3G update to 3.0 with repeated 1013 errors - now bricked iPhone! ;-(

Attempting to update an iPhone 3G to 3.0 from 2.2.1 and it's now a brick.
Note that I've tried this now from THREE different computers, two macs and one windows box with identical results. I've uninstalled iTunes on the windows box before doing the update attempt.
The error message is "1013" which also takes you to this highly uninformative page: http://support.apple.com/kb/TS1275.
Ok, the USB cables and ports on three computers see the same problem error. So it's either the iPhone itself or iTunes 8.2 (23) or both.
Digging a bit deeper I found that there is a log file kept on the mac. Change to this directory from your home directory "~/Library/Logs/iPhone Updater Logs/" where you'll find one "iPhoneUpdater N.log" file for each attempt to update that you've done.
When the error occurs Apple asks if I want to send the info to them! YES!!! Make sure you do so that they can sort this out.
Ok, looking in this log file (I won't dump it all here) you can see a number of errors. The end of the log file shows:
Powering radio on through AppleBaseband
- Ping failed, trying again, 21 tries left
- Ping failed, trying again, 20 tries left
- Ping failed, trying again, 19 tries left
- Ping failed, trying again, 18 tries left
- Ping failed, trying again, 17 tries left
Exception at :0:
- BBUReturnTimedOut(10)/16: Pinging timed out
unexpected bbupdater exit code 16
==== end of device restore output ====
2009-06-17 23:39:34.000 iTunes124:11483: <Restore Device 0x188a3ef0>: Restore
failed (result = 1013)
2009-06-17 23:39:44.000 iTunes124:20b: iTunes: Restore error 1013
Clearly there are some problems. Earlier in the log file it had problems updating a number of files.
Now I've tried this "Connect your iPhone to the computer. press and hold sleep and home, and as soon screen goes blank, count off 5 seconds, then let go of sleep and keep holding home." That didn't change anything. sigh.
It's almost as if this particular version of the iPhone that I have is incompatible with the current iPhone 3.0 operating system components. Maybe there is a bad driver? Hmmm....
Ok, here is another error in the log file.
Loading FLS file /usr/local/standalone/firmware/ICE2_04.26.08.fls...OK
Sending Block of type CodeClass(0) from file /usr/local/standalone/firmware/ICE2_04.26.08.fls...
Beginning Dynamic EEP erase at 0x20E40000 to 0x20EBFFFE...Progress: 0 percent, 0 of 524286 Progress: 100 percent, 524286 of 524286. OK
Sending Security Block...OK
Erasing Load Area from 0x20040000 to 0x2068FF66 (this will take some time)...OK
Sending data for mapping 0: progress: 0 percent, 0 of
6618984 progress: 0 percent, 2048 of
6618984 progress: 0 percent, 4096 of
6618984 progress: 0 percent, 6144 of
6618984 progress: 99 percent, 6617088 of
6618984 progress: 100 percent, 6618984 of 6618984. -- OK
Checking validation result... - Warning: Validation result code indicates failure, result code = 0x0
So clearly the file "/usr/local/standalone/firmware/ICE2_04.26.08.fls" isn't transferred properly! Something is amiss somewhere...
Could it really be that it can't download the update file to the iPhone due to USB problems? Surely Apple has access to fault tolerant file transfer protocols they can use?
Sigh... now I'm without my primary phone... grrrr... arrrrg... should have waited....
Apple maybe you could learn something about "ACID TRANSACTIONS" and include them into the update process to guarantee either 100% success or 100% abort rollback?
I don't know if this is relevant but now in iTunes on the iPhone page it no longer shows any values at all for the "name, capacity, software version or serial number" fields which is kind of spooky. Does this mean that I need to take the phone in for service? Is it permanently toast?

Just visitied the Apple Store in Vancouver and wasn't allowed in! They had a wall of orange shirts AND two mall SECURITY guards preventing people from entering UNLESS you were there to purchase a new iPhone 3GS!
The orange shirt gave me grief refusing to allow me to see a service person! So I asked to speak to his manager. Matt showed up and read me the same riot act of BAD CUSTOMER SERVICE!!! They claimed it was the first day since they opened that they closed their Genius Bar!
The fact remains that it was APPLE's Update that bricked my iPhone that I depend upon.
So the manager went off to get his boss when I asked him too. I think he was just glad to get away from a rational insistent customer spoiling their wonderful happy Apple day selling new phones.
So a non-technician showed up and offered to take my phone into the store and try to update it. She lied. She returned to tell me that my warranty was expired due to the "water litmus" paper being RED. ***? You've got to be kidding! I've NEVER had it anywhere near water! The lie was that she didn't actually try to connect it and that she was going to secretly find out if my warranty was void. Not what I call informed consent.
So I asked her to check and try updating the phone anyway and off she trundled. Less than no time she returned telling me that my iPhone couldn't be seen by three of their computers! ***! It was working on my three computers at home!
In fact as I type this it's running another update this moment. About 3/4 done.
So now Apple's Update Bricked my iPhone which was working perfectly without any problems. If they hadn't brought their update out the phone would still be working just great!
Needless to say I'm extremely annoyed yet composed (for the moment).
So my options at this point seem to be to (1) replace the phone for ~260.00 CAD or (2) upgrade to a 3GS for an indeterminate amount if FIDO permits it, or (3) hope that Apple home base gets their act together with a new iTunes update which can at least get the phone working again, (4) toss the phone off a bridge, (5) sue Apple and FIDO for their negligence in providing faulty software updates that bricked the phone. Grrr... Arrrggg....
Oh, it just failed the update again! At least it can be seen by my computers (two mac and one vista box).
Ok, now what...
CHECK YOUR iPhone warranty voided strips to see if they are RED/PINK! If it's only iPhones with RED that are the problem then maybe that's the cause. HOWEVER, if even ONE iPhone has this problem and it's not got a RED water strip then it's conclusive that the problem is elsewhere - basic diagnostic process and rock solid logic. Please check your RED WARRANTY VOIDED STRIPS and let me know here... you check them with a flash light at the bottom of your iPhone in the slot where the SIMM card is and where the dock/cable connector goes in. Shin the light into there and move the phone or the light about till you see either a 1/4 inch long strip - RED/PINK means you Apple won't honor your warranty or their craftsmanship.
Ok... now to find out how much it will cost to upgrade to a 3GS on the FIDO plan. Sigh. Grrr... arrrggggg....

I updated my ipod and it deleted my entire library how do I restore it with the backup I have saved?

I updated my ipod and it deleted my entire library. How do I restore it with the backup I have so all songs will be available in the cloud; which I paid extra Money to increase memory for?

The backup that iTunes makes does not include apps, music, synced videos and photos. Se:
iTunes: About iOS backups
You will have to sync the items back form yur computer/iTunes library to the iPod via iTunes. If they are not on the computer you can redownloa d some iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

The new Update with the Patch for Camera Raw is not working. Code U44M1P34

Hi there,
i have a problem with the new CC Update - including the patch for Camera Raw 8.7.1
Error Code: U44M1P34
Photoshop CC (2014)
After Effects CC (2014)
Brisge CC
The logfile shows 1 fatal error:
FATAL: Payload 'Photoshop Camera Raw 8_8.7_AdobeCameraRaw8.0All 8.0.0.22 with a number following.
I have tried to uninstall an reinstall. Did not work at all, because the same Problem is shown.
I did not install in other folders. All other updates worked - but not this update. The problem seems to bee only caused by the Camera Raw Update.
Are there others with the same Problem? Any ideas?
Thanks in advance and Greetings,
Joerg

Hi Jeff,
it seems that i have found a dirty, but working solution for my problem on this site: Getting fatal Exit Code 34 when installing an app
To change these 3 folder names and reinstalling of my Programs worked fine without any errors:
Adobe PCD -> Adobe PCDold
backup -> backupold
caps -> capsold
Now the Programs are on the actual status with all updates included and everythings seems to be fine.

After updating with ios7, I cannot proceed because I cannot enter my password since it uses Greek letters but the keyboard available is Latin. How can I change the keyboard to Greek?

After updating with ios7, I cannot proceed because I cannot enter my password since it uses Greek letters but the keyboard available is Latin. How can I change the keyboard to Greek?

try tapping holding on the key that would be most similar to the letter you want to enter, that will bring up a menu of other characters similar to that character and maybe the greek letter will be included in that menu

Eclipse (including 3.2): CVS avoiding update with Entries.Backup errors

Similar Messages

Maybe you are looking for