ECM11g: How to enforce HTTPS access for Content server console

Hi,
We have a requirement of accessing Content Server console (https://<hostname>:<port>/cs) with https protocol only. If a user sends a http request (http://<hostname>:<port>/cs) it should get converted to https.
The managed server is running with non SSL port. The request is comming from Apache where we have used the parameter "WLProxySSL" to enforce the https, however its not getting enforced for Content Server URL.
Any help in this regard is highly appreciated.
Thanks.

Sorry, I forgot to say that
i don't want to use the popup
window that appears when JWS
encounter an URL that requires
basic authentication.
In fact, I don't want to have to enter
login/password for updates each time
I start my application with JWS.

Similar Messages

How enable read only access for ACS server itself

Hi,
We would like to know whether its possible to create a read only access to the ACS server. Currenlty ACS server has a generic login with full admin rights.
We need to create a login to couple of users to log into ACS to check the "Report and Activity" tab. Access to all other tabs should be disabled.
We are using ACS4.0 verison. Please let me know whether its possible.
Thanks
Nachi

Hi,alexchy8
We can make use of 2 PowerShell commands to achieve this goal.
Add-MailboxPermission and Add-MailboxFolderPermission.
Execute the Add-MailboxPermission command to delegate the read permission at mailbox level.
Execute the Add-MailboxFolderPermission command to delegate the required permissions on specific folders inside the mailbox.
You can read the following article as reference:
http://www.exchangedictionary.com/articles/assign-read-only-mailbox-permission-on-exchange-2010-2013-powershell
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety,
or suitability of any software or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards.

Questions for Content Server

Dear All;
l have setup the Content server in Windows 2003 Standard Edition using the filesystem storage (not the MaxDB database), and the size of the document could be approximately 80GB (for the next few years), l didn't setup the Cache server.
All the attachment in the ECC will store into this External SAP Content Server.
Question 1:
Can anyone advise whether the Content Server(filesystem) will be having performance issue while store/retrieve documents? Is there any way to improve the performance of the Content Server?
Question 2:
Security. what are the necessary security option that l need to configure for the Content server? at the moment, the Windows server still configure as full access for the Content Repository folder. Otherwise the ECC will be having access denied problem when communicating with the Content Server.
Question 3:
There are some attachment in ECC, how to l move those documents to Content Server?
Please advise.
Many thanks
Jordan

When I say use certificates, there should be a checkbox with "check signature". This ensure that only sap machines with an active certificate can access the content server.
On the file system, I would ensure that no users have access to the file system through the backend. If they can modify documents, you will be sitting with major problems from a document integrity and legal perspective.
On the issue of migration, there is an oss note for the migration of data from one repository to another for archivelink.
Check note number 1043676
Symptom
You have created a new repository, and would like to migrate the ArchiveLink Documents to the new repository.
Other terms
Migration of documents, ArchiveLink, repository
Reason and Prerequisites
This report helps migration of ArchiveLink documents.
To use this report effectively, you would need to ensure that you apply the note 732436. However, this note will allow the migration of documents from and to type of repositories which are supported by ArchiveLink. The types of repositories that are supported by ArchiveLink are HTTP, RFC and R/3 Database.
Solution
Before you execute the report, you must set up a repository that can
store the documents (transaction OAC0). The repository may be in an
external archive(connected via HTTP or RFC) or (as of Basis Release 6.10) in the OLTP database of the SAP system. You can also use SAP Content Server as an external archive for storing documents.
The report has the following parameters:
OLD_ARC ID of the old repository previously used
NEW_ARC ID of the new repository
TEST_RUN: If you enable this, only a test run occurs, copy of documents does not occur.
DEL_FILE: If you enable this, then the files would be deleted from the old repository.
Launch the transaction SE38 and create a program with the name ZMIGRATE_ARCHIVELINK_FILES. Once the program is created, now copy the code from the correction instruction.

Adobe Illustrator in out Terminal Server environment. How is the licensing work for Terminal Server installations?

Adobe Illustrator in out Terminal Server environment. How is the licensing work for Terminal Server installations?

You can find all forums here:
https://forums.adobe.com/welcome

Carrier Type In DMS for content server

Dear All,
Can anyone help me in telling which carrier type i have to define in dc20 for Content server, if any required.
i have configured content server in Oac0,oact, csadmin, but while saving file on server (check in) it is giving me this error
Error while checking in and storing: Message no. 26253 .
Regards
Kashif

This error usually comes beacuse of improper settings maintained in CSADMIN for repository:
Do few changes in CSADMIN Settings for repository:
ContentStorage Host : (Enter name instead of IP)
ContentStorageName : WCC
Storage : ContentStorage.dll
Security : 1
ContRepDescription : (Enter descreption as given in OAC0)
driver : LiveCache or MaxDB (Whatever you are using)
Incase of DB, maintain also
SAPDMSUser :
SAPDBPassword :
Please check after making these changes and revert.
/Tilak

The best place for content server

Hello,
We need to install content Server . SAP ECC is in Paris .
The users who will use the content server will be in New-York.
Is the best place for content server in Paris or in New-York?
The question could be : Will a document (for ex. a pdf of 100 Mb) to be checked_in the CS be first transferred from frontend to ECC and then from ECC to CS or directly from frontend to content server ?
Thanks

Hi Oda,
If your users are in New-York, then better to have content server there to optimize network traffic and speed. There is something called as distributed content server concept where you can have different storage areas for different geographical locations.
And as far as i know, whenever files are checked-in, they are directly stored in content server and it will not route through the ECC. Only DIR stored in the ECC will be linked to the file in the content server.
Hope this helps.
Regards,
Ravi

How PLM documents saved in the Content Server or in the database.

Hi All,
Please tell me the concept about given below scenario:
Normally PLM documents are either saved in the Content Server or in the database.
What if we have neither configured a database nor a content server. Where are they being stored then.
what exactly Document serever , how the PLM document save on Content Server or in data base server.
Thanks
Narendra Vikram Vishwakarma

Hi All,
Please tell me the concept about given below scenario:
Normally PLM documents are either saved in the Content Server or in the database.
What if we have neither configured a database nor a content server. Where are they being stored then.
what exactly Document serever , how the PLM document save on Content Server or in data base server.
Thanks
Narendra Vikram Vishwakarma

Urgent: How to list all alias for a server throw DNS query?

Hi
Is there anyone know how to list all alias for a server by asking the network DNS. Is that possible?
It doesn't work with InetAddress it return a single result.
Best regard

InetAddress will not get you the aliases, but you can certainly find all the different IP addresses for a specific host name using the getAllByName() method.
You won't be able to get the aliases since those IP addresses (assuming there are more than 1) will all be cached as mapping to the name you passed to the getAllByName() method and you can't clear the map cache until the JVM exits.
So your best hope is to get a list of IP's and either exit your app and restart with a new mode, or save them to a file for another app to read.

How's this partition table for my server?

How's this partition table for my server? Web/DNS/DHCP/Mail Server.
hdd1: ~8gb total
/boot - 100mb
swap - 1gb
/ - rest of drive
hdd2: ~155gb total
/var - whole drive
This is a Compaq ProLiant 5500 server with 10 drives. Will most things be installed inside /var or what?

Zetsumei wrote:Web/DNS/DHCP/Mail Server.
Web = /srv
DNS = /var
DHCP = /var
Mail = Depends which package you use. I use postfix and told it to use /srv
I would half your swap, reduce /var and put the extra space into /srv
Also create a separate /tmp and /home to prevent accidental or deliberate DoS attacks by filling your / partition
Here's what I use on my Web / DNS / FTP server:
Filesystem Size Used Avail Use% Mounted on
/dev/xvda 493M 176M 317M 36% /
/dev/xvdc 31M 674K 29M 3% /boot
/dev/lvmData-home 62M 26M 34M 44% /home
/dev/lvmData-usr 2.0G 848M 1.1G 45% /usr
/dev/lvmData-tmp 496M 20M 451M 5% /tmp
/dev/lvmData-srv 1.5G 769M 667M 54% /srv
/dev/lvmData-var 496M 231M 241M 49% /var
/dev/lvmData-pacman 384M 303M 82M 79% /var/cache/pacman
/dev/lvmData-backup 5.5G 4.6G 565M 90% /mnt/backup

How to access the SAP Server Console? Through VPN

How to access the SAP Server Console? Through VPN
Sudhakar

Hi,
You need to contact your system admin as they will enable the port in ur system so that u can access client servers.It should also be allowed from client side also i mean access.
You will connect thru weblink with user name and pw and SAP with logon details.
Thanks
Suresh

What is the default User Id and Password for Endeca Server Console

Hell All,
I have installed Endeca Server 7.6.0.0.0 in Windows 64-bit. When I try login to http://localhost:7001/endeca-server/console/ it asking Login id and Password to for "sh_sample" datadomin that i imported from SampleApp. I tried using Admin Server user id and it did not work.
Please help.
Thank you

Hi,
It is possible that you are asking about these two issues:
1. SH sample data set is a data set that can be used with the Endeca Server, outside of the context of Studio. In particular, this data set represents an already created index, and thus can be queried by using SOAP UI, or other tool for working with Endeca Server's web services directly. This data set does not include collections (in v.7.6.0.0), and thus cannot be viewed or worked with, in Studio (which, like Integrator, requires having collections, as compared to Endeca Server 7.6.0.0 in which collections are optional at ingest time).
2. The Endeca Server Console that you are trying to use is packaged with the Endeca Server because it is part of the Data Enrichment Module. Data Enrichment Module includes the Console and plugins. You can use the plugins within Studio. The Console, although it is installed with the Endeca Server, is not intented to be used in this release (because the Data Enrichment plugins are available to users through Studio).
To get back to your questions, if you would like to use SH data set, please see the instructions in the Endeca Server Installation Guide. http://docs.oracle.com/cd/E40521_01/server.760/es_install/toc.htm#Using%20the%20SH%20sample%20data
As for the Console, it should not be used. Instead, use Studio's Enrichments. For information, please see: Enriching Data Set Attributes

How to increase Memory and Java Heap Size for Content Server

Hi,
My content server is processing requests very slowly. Over performance is not good. I have 2 GB of RAM any idea what files I can modify to increase the Java Heap Size for the Content Server. If I increase the RAM to 4 or 6 GB where do I need to make changes for the Java Heap Size and what are the recommended values. I just have Content Server Running on the linux box. Or how do I assign more memory to the user that owns the content server install.
Thanks

You might find these interesting:
http://blogs.oracle.com/fusionecm/2008/10/how_to_-javatuning.html
http://download.oracle.com/docs/cd/E10316_01/cs/cs_doc_10/documentation/admin/performance_tuning_10en.pdf
Do you have access to metalink? This has about everything you could want:
https://metalink2.oracle.com/metalink/plsql/f?p=130:14:9940589543422282072::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,788210.1,1,1,1,helvetica
Or search for "788210.1" in metalink knowledgebase if that link doesn't work and look for the FAQ on configuring Java for Content Servers

HTTP error for content repository

Dear gurus,
we defined a content repository to store images (Employee photos) in our HR instance (ECC 6). we set customizing for Sap Archive Link and "document type" (HRICOLFOTO). We followed suggestions of this link: [http://www.sd-solutions.com/documents/SDS_Employee_Photos_v4.7.html|http://www.sd-solutions.com/documents/SDS_Employee_Photos_v4.7.html]. When we try to store an image (JPG file) using OAAD transaction code we get "HTTP error: 500 Internal Server Error". Again using CSADMIN transaction code to test HTTP server assigned to content repository we get the same message. Work process trace file is attached below. Thanks for your help.
W Tue Jan 20 09:01:06 2009
W      *** ERROR => Failed to create new session, rc: 0x1 [itspxx.cpp   713]
W    *** ERROR => itsp_OpenSession failed rc = 1, send icf error page [itsplxx.c    839]
M    ***LOG W03=> [itsplxx.c    840]
W    *** ERROR => ipl_OpenSession returns 1(ITSPE_FAILURE) [itsplxx.c    842]
W    *** ERROR => Raise Last error:[13 from: itspagat.cpp:820] [itsplxx.c    1180]
W    *** ERROR => RaiseError(sapdext) ITS_P:13 [itspagat.cpp 820]
W        *** ERROR => plugin: Unknown user agent type, not supported 'SAP Web Application Server (1.0;640)' [itspagat.cpp 819]
W        *** ERROR => plugin: Browser verification failed rc: 1 [itspagat.cpp 750]
W      *** ERROR => plugin: ItspAgat_InitContext failed, rc = 1 [itspxkrn.cpp 174]
W
W Tue Jan 20 09:01:21 2009
W      *** ERROR => Failed to create new session, rc: 0x1 [itspxx.cpp   713]
W    *** ERROR => itsp_OpenSession failed rc = 1, send icf error page [itsplxx.c    839]
M    ***LOG W03=> [itsplxx.c    840]
W    *** ERROR => ipl_OpenSession returns 1(ITSPE_FAILURE) [itsplxx.c    842]
W    *** ERROR => Raise Last error:[13 from: itspagat.cpp:820] [itsplxx.c    1180]
W    *** ERROR => RaiseError(sapdext) ITS_P:13 [itspagat.cpp 820]
W        *** ERROR => plugin: Unknown user agent type, not supported 'SAP Web Application Server (1.0;640)' [itspagat.cpp 819]
W        *** ERROR => plugin: Browser verification failed rc: 1 [itspagat.cpp 750]
W      *** ERROR => plugin: ItspAgat_InitContext failed, rc = 1 [itspxkrn.cpp 174]
W      *** ERROR => Failed to create new session, rc: 0x1 [itspxx.cpp   713]
W    *** ERROR => itsp_OpenSession failed rc = 1, send icf error page [itsplxx.c    839]
M    ***LOG W03=> [itsplxx.c    840]
W    *** ERROR => ipl_OpenSession returns 1(ITSPE_FAILURE) [itsplxx.c    842]
W    *** ERROR => Raise Last error:[13 from: itspagat.cpp:820] [itsplxx.c    1180]
W    *** ERROR => RaiseError(sapdext) ITS_P:13 [itspagat.cpp 820]
W        *** ERROR => plugin: Unknown user agent type, not supported 'SAP Web Application Server (1.0;640)' [itspagat.cpp 819]
W        *** ERROR => plugin: Browser verification failed rc: 1 [itspagat.cpp 750]
W      *** ERROR => plugin: ItspAgat_InitContext failed, rc = 1 [itspxkrn.cpp 174]
W      *** ERROR => Failed to create new session, rc: 0x1 [itspxx.cpp   713]
W    *** ERROR => itsp_OpenSession failed rc = 1, send icf error page [itsplxx.c    839]
M    ***LOG W03=> [itsplxx.c    840]
W    *** ERROR => ipl_OpenSession returns 1(ITSPE_FAILURE) [itsplxx.c    842]
W    *** ERROR => Raise Last error:[13 from: itspagat.cpp:820] [itsplxx.c    1180]
W    *** ERROR => RaiseError(sapdext) ITS_P:13 [itspagat.cpp 820]
Regards.
:: Vittorio

Theres a button beside CSADMIN that looks like a balance. You can use that to check... but as it is a R/3 Database repository it might not be there.
Now, you said
When we try to store an image (JPG file) using OAAD transaction code we get "HTTP error: 500 Internal Server Error". Again using CSADMIN transaction code to test HTTP server assigned to content repository
How can you be calling a HTTP repository when you are actually storing the data in the R/3 Database? That doesn't make sense to me.
Can you explain your full landscape?
regards
Juan

Enable https for Content Server

Hi everyone,
I just want to change the https property for a certain content server and i don't know how to do it...
What i know :
There is a table called CREP_HTTP where i read some values. Those values need to be changed. I already find how to change the most of them, but for the two fields HTTP_BE and HTTP_FE i'm stuck ...
And i need to change the values to say that my content server has https capabilities.
Anyone knows in which transaction i can do that ?
Thx for help

Hi,
Pls don't forget to reward points and close the question if you find the answers useful.
Eddy

How to block internet access for RDS and RemoteApp users?

Hi everyone,
This question might partially belong to security forum but I think anyone using RDS services comes across this. I would like to TOTALLY block all internet access including "updates" to any software, windows updates, anti-virus updates, TCP, UDP,
or ANY other protocol out of the server. I would like to only allow traffic both ways for established traffic (e.g. accessing the remote apps).
How can I achieve this without involving a third party firewall software?
Thanks

In our visitor center, we setup a computer with fake proxy server and add our website to the exception so that the visitors access our website only and no other website. If this RDS is for internal use only, you may disable default gateway. This link may
give you more options.
how to
restrict internet access
How to restrict Internet Access. You may have many options to disable a user or
computer to access the Internet. Some options can be adopted for many users
www.chicagotech.net/Internet/restrictie0.htm
Bob Lin, MVP, MCSE & CNE Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.howtonetworking.com

ECM11g: How to enforce HTTPS access for Content server console

Similar Messages

Maybe you are looking for