[Ecore] xsd2ecore files not readable any longer after migration to Mars

Hello,
When working in Luna, I had no problems to visualise the contents of xsd2ecore files with the Ecore to XML Mapping Editor.
Now that I've migrated to Eclipse Mars, the files do not seem readable any longer. The editor emits two errors :
Quote:
org.eclipse.emf.ecore.xmi.PackageNotFoundException: Package with uri 'http://www.eclipse.org/emf/2002/XSD2Ecore' not found. (platform:/resource/be.groups.portfolio.domain/model/portfolioExtended.xsd2ecore, 5, 24)
and
Quote:
ClassNotFoundException: Class 'XSD2EcoreMappingRoot' is not found or is abstract. (platform:/resource/be.groups.portfolio.domain/model/portfolioExtended.xsd2ecore, 5, 24)
Is there anything I have to do to make the editor work as before ?
I'm using the EMF XML to Ecore Mapping Editor 2.8.0.v20150601-0402.
Thanks for any advice,
Thomas Elskens

Thomas,
Comments below.
On 14/07/2015 3:25 PM, Thomas Elskens wrote:
> Hello,
>
> When working in Luna, I had no problems to visualise the contents of
> xsd2ecore files with the Ecore to XML Mapping Editor.
> Now that I've migrated to Eclipse Mars, the files do not seem readable
> any longer. The editor emits two errors :
The XML Mapping Editor isn't the same as the XSD to Ecore Model Editor.
So it sounds like you don't have the right editor/model plugins
installed. In particular, the org.eclipse.emf.mapping.xsd2ecore bundle
must be installed for any editor to recognize this model. You can
update your installation to install it from the Mars repository.
>
> Quote:
>> org.eclipse.emf.ecore.xmi.PackageNotFoundException: Package with uri
>> 'http://www.eclipse.org/emf/2002/XSD2Ecore' not found.
>> (platform:/resource/be.groups.portfolio.domain/model/portfolioExtended.xsd2ecore,
>> 5, 24)
>
>
> and
> Quote:
>> ClassNotFoundException: Class 'XSD2EcoreMappingRoot' is not found or
>> is abstract.
>> (platform:/resource/be.groups.portfolio.domain/model/portfolioExtended.xsd2ecore,
>> 5, 24)
>
>
> Is there anything I have to do to make the editor work as before ?
> I'm using the EMF XML to Ecore Mapping Editor 2.8.0.v20150601-0402.
> Thanks for any advice,
>
> Thomas Elskens

Similar Messages

  • Canon Pixma MP 540 does not scan any longer after update mountain lion. printer works normally. Who can help.

    My Canon Pixma MP 540 does not scan any longer after update mountain lion. MP Navigator EX 2.0 starts and immediatley stops and comes with this message:
    Application Specific Information:
    *** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '-[NSImageCell loadingState]: unrecognized selector sent to instance 0x825c0f0'
    Printer works normally. Who can help.
    Thank you
    PeterPan52

    Hi
    Did you find a solution to this ? I amhaving same problem
    Thanks

  • Keyboard does not workd any longer after re-opening the Laptop / OS sleep (Win XP SP2 + SP3)

    I have a problem and if someone else knows a solution or encountered the same, some feedback would be great.
    On my Z61 I experienced it sometimes when I was out for presentations that after opening the lid of the laptop and the OS recovered from sleep, the whole keyboard did not work any longer. Even such special key-combos like switching thinklight on or off did not work any longer.
    The only thing I can do then is to press the power button down for some seconds to force the computer to switch off. Logically, any unsaved work is lost then. Any Ideas? I recently removed all ThinkVantage Components and then re-installed them because I was experiencing problems with the software. Now everything else works again but this keyboard switched off problem appeared again.
    Message Edited by hakre on 08-04-2008 12:03 AM

    I have sp3, t60. From time to time my keyboard and touchpad are not working but external mouse is working. Searching through the internet i observed that this is not only my case, i assume this is XP SP3 problem.
    How I am solving this: going to software manager, droping keyboard device. Here windows behavior differs from time to time, it can ask me for reboot, and can just go for reboot without any prompt. In any case after droping device i am getting keyboard working, and after several reboots touchpad starts to work.
    On SP2 i had never experienced this problem.  

  • Disc Burner. Why are some files not readable or writeable?

    Hello,
    I am trying to backup my friends computer files on a beige G3 (233 MHz). I am burning about 6 DVDs of AIF music files. Most of the files are about 30 - 40 Megs in size. Often I receive error messages on particular files that read:
    "The operation cannot be completed because some data cannot be read or written.
    (Error code - 36)"
    Followed by the choices: "Stop" or "Continue".
    I have a bad feeling that my startup disk is too small but I am not sure.
    Most of the files work fine. However some of the files cause disc burner to not be able to use them in the disc image before I burn. Why would this be?
    Here are the specifications:
    Computer: beige G3 with two hard drives (one SCSI and one ATA hard drive) and a Pioneer DVR-110D DVD writer which is Apple supported (Apple system profiler indicates Apple supported on this DVD writer). My blank DVD disks are Sony Vermatim DVD-R (1 - 16x speed support). Although I think my beige G3 only writes them at about 2 or 4x.
    I am using OS 10.1.5. My startup disk which has OS 10.1.5 in it is a 4 GIG SCSI disk. Is this big enough for a startup disk (for creating 4.5 GIG DVDs)? My files are on the second hard drive which is a 40 GIG ATA disk.
    I have a bad feeling that my OSX startup drive is too small for disk burning - it is only 4 GIGs in total and OSX Disc burner (Disc copy) is first making a disk image on my startup volume before it burns it. Perhaps that disk image is too large for the startup volume. Is there any way I could ask OSX to put this disk image on the second larger hard drive instead (not the startup drive?).
    Here is my process (I hope I am doing this right - I am new at this):
    1. I first insert a blank DVD-R
    2. A message pops up asking my if I would like to create a blank disc image for this disk (I think this is the typical Disk Copy utility window. I say "yes" and give it a name and choose the "DVD-R or DVD-RAM" option. (I am not sure if there are other important settings to choose here or better settings to use but I guessed the other options that seemed obvious. A blank disk image is created with an icon that looks like a DVD disk.
    3. Then I drag my chosen files to this blank disc image. It takes about 30 minutes to copy over. Thats when I receive the error message that some files couldn't be "read or written". The other files work fine but it would be nice if they all worked.
    Why would some files not be readable or writeable?
    4. Then I choose file/burn in the top menu and the DVD is created. This takes another 20 - 30 minutes. At the very end of the process another message pops up saying:
    "Sorry the operation could not be completed because an unexpected error occured (error code -28)" Followed by an "OK" button.
    However all the files that made it onto the final DVD are fine - its just that its not all of the ones I originally chose in the first step when dragging to create the disk image.
    Am I doing this the right way?
    Why are some files not "readable or writeable" as it indicates in the error message?
    Is my 4 GIG startup disk too small for this? or are the music files possibly corrupt? or could there be some other possible problem?
    Thanks

    To follow up, I have some good news. After following your advice Kappy, it now works very well Thanks! Instead of using the 4 GIG volume for the OS, I am now using an 8 GIG partition on an 80 GIG drive. So now the OS has some room to operate. No disk errors occured on my first DVD
    Now there was one problem. The second DVD burned gave me an error. I am not sure why but I am going to guess that because I had to installed the OS onto an 8 GIG partition maybe the OS needs to be rebooted in between disk burns because although 8 GIGs is certainly greater than the 4 GIGs I gave it last time, it still isn't a lot of space - maybe just enough to do one DVD at a time. Thats only a guess. So I rebooted to see if that clears the system out ready for the next DVD and I am trying to burn the second DVD again. If I remember I will report back. In any case, yes, this seems to be working. I hope this second DVD burns well too.
    Thanks Kappy

  • File not readable

    I have been working on my sister in laws wedding imovie project and now when I try and open it, it says file not readable. I can open other saved movies and when i tried to start a new one and saved it, the new one is also saying file not readable. Is there any hope? Can I fix it so I can do a new one?

    The project has probably been damaged, usually the result of emptying the iMovie trash. If you'd like me to try to rescue it, see my note here:
    http://discussions.apple.com/thread.jspa?messageID=1329742&#1329742
    If a project is unreadable, it may be (indirectly) affecting your trying to open the new project, causing you to conclude it is unreadable too.
    Double-clicking on the iMovie application to launch it — or single-clicking on iMovie in the Dock — normally causes iMovie to open the most recently-opened project. The name of that project is saved in the iMovie preference file.
    iMovie may be repeatedly trying to open the corrupt project instead of the new one, creating the (false) impression the new project is corrupt too.
    It's also possible iMovie is damaged, but that doesn't usually cause iMovie to complain it can't read a project. It just fails to open.
    My guess is the problem is limited to just one project. To find out for sure, double-click on a project you KNOW is okay to open iMovie, create a new project, save it, quit iMovie and re-launch iMovie. If the new project opens, everything is okay, but the corrupt project needs fixing.
    Karl

  • I have recently update my computer to mavericks and my hp c4380 does not scan any longer

    Hello,
    I have recently updated my computer to Maveriks and my HP C4380 does not any longer scan. How can I solve this issue?
    Regards,
    Jacques..

    Thanks. Your suggestion is good but it does not allow me to scan multiple page documents and get a unique pdf file (I get as many files as there are pages in the document). With the HP scan software it was possible to do it but this software does not work any longer with Maveriks. I do hope that this problem will be solved as soon as possible.
    Regards.
    Jacques.

  • CQ5 Startup errors ESAPI directory or file not readable.

    Here is the startup screen output with the errors bolded, any help is appreciated.
    :/lopt/dev/instances/author1/crx-quickstart/bin $ 31.05.2013 08:08:32.365 *INFO * [main] Setting sling.home=crx-quickstart (command line)
    31.05.2013 08:08:32.371 *INFO * [main] Starting Apache Sling in /lopt/dev/instances/author1/crx-quickstart
    31.05.2013 08:08:32.380 *INFO * [main] Checking launcher JAR in folder /lopt/dev/instances/author1/crx-quickstart/launchpad
    31.05.2013 08:08:32.380 *INFO * [Apache Sling Control Listener@/127.0.0.1:43654] Apache Sling Control Listener started
    31.05.2013 08:08:32.399 *INFO * [main] Existing launcher is up to date, using it: 2.4.1.R1416835 (org.apache.sling.launchpad.base.jar)
    31.05.2013 08:08:32.402 *INFO * [main] Loading launcher class org.apache.sling.launchpad.base.app.MainDelegate from org.apache.sling.launchpad.base.jar
    31.05.2013 08:08:32.440 *INFO * [main] Setting sling.launchpad=/lopt/dev/instances/author1/crx-quickstart/launchpad
    31.05.2013 08:08:32.441 *INFO * [main] Setting sling.home=crx-quickstart
    31.05.2013 08:08:32.441 *INFO * [main] Setting org.osgi.service.http.port=4502
    31.05.2013 08:08:32.441 *INFO * [main] Starting launcher ...
    31.05.2013 08:08:32.442 *INFO * [main] HTTP server port: 4502
    RAWProcessor succesfully installed
    31.05.2013 08:09:06.608 *INFO * [main] Startup completed
    Attempting to load ESAPI.properties via file I/O.
    Attempting to load ESAPI.properties as resource file via file I/O.
    Not found in 'org.owasp.esapi.resources' directory or file not readable: /lopt/dev/instances/author1/ESAPI.properties
    Not found in SystemResource Directory/resourceDirectory: .esapi/ESAPI.properties
    Not found in 'user.home' (/lopt/adobe) directory: /lopt/adobe/esapi/ESAPI.properties
    Loading ESAPI.properties via file I/O failed. Exception was: java.io.FileNotFoundException
    Attempting to load ESAPI.properties via the classpath.
    SUCCESSFULLY LOADED ESAPI.properties via the CLASSPATH from '/ (root)' using class loader for DefaultSecurityConfiguration class!
    Attempting to load validation.properties via file I/O.
    Attempting to load validation.properties as resource file via file I/O.
    Not found in 'org.owasp.esapi.resources' directory or file not readable: /lopt/dev/instances/author1/validation.properties
    Not found in SystemResource Directory/resourceDirectory: .esapi/validation.properties
    Not found in 'user.home' (/lopt/adobe) directory: /lopt/adobe/esapi/validation.properties
    Loading validation.properties via file I/O failed.
    Attempting to load validation.properties via the classpath.
    SUCCESSFULLY LOADED validation.properties via the CLASSPATH from '/ (root)' using class loader for DefaultSecurityConfiguration class!

    Hi jtwcarboy,
    Apart from message in logs are you facing any functionality issue is AEM?
    Thanks,
    Sham

  • I had been using iMessage all along with my friend who is using an iPhone 6. I choose to send a sms to him as I do not have any connection, after that there is no way I can send him an iMessage again. Can anyone advise how do I switch back?

    I had been using iMessage all along with my friend who is using an iPhone 6. I choose to send a sms to him as I do not have any connection, after that there is no way I can send him an iMessage again. Can anyone advise how do I switch back? I had tried resetting the network setting, toggling off the sms but to no avail.
    Thank you.
    Regards

    What do you mean you choose to send him an SMS because you don't have any connection. What kind of connection? Delete the thread with that individual that you sent via SMS, and as long as you have iMessage activated on your device and your friend has an active data connection, it should recognize that and send as an iMessage. Another scenario is to have the friend send you a message that you can respond to.

  • [svn:fx-trunk] 16385: -removed the utilities package target since it' s not used any longer - at least what is contained in this target.

    Revision: 16385
    Revision: 16385
    Author:   [email protected]
    Date:     2010-06-01 13:32:35 -0700 (Tue, 01 Jun 2010)
    Log Message:
    -removed the utilities package target since it's not used any longer - at least what is contained in this target.  I believe this was a leftover from flex 2 days.
    -fix up the packaging targets to ensure they are being properly built.  I removed depends="temp-clean" and inserted antcall target="temp-clean" because a target gets executed only once, even when more than one target depends on it. 
    QE notes:
    Doc notes: no
    Bugs: no
    Reviewer: Guarav
    Tests run: no
    Is noteworthy for integration: no
    Modified Paths:
        flex/sdk/trunk/build.xml

    http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html
    -This messages says (at least some) CC 2014 programs use NEW plugins https://forums.adobe.com/thread/1499663
    -so do not uninstall the older CC programs if you use plugins in your programs until you are sure you have plugins that work in CC2014
    If you are sure you don't need the old CC programs
    -http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall

  • My safari browser is not loading any thing after an update 5.1!! i had to create guest account to brows!! pls help ASAP!!

    my safari browser is not loading any thing after an update 5.1!! i had to create guest account to brows!! pls help ASAP!!

    my safari browser is not loading any thing after an update 5.1!! i had to create guest account to brows!! pls help ASAP!!

  • "File not readable" error in CS6

    I've opened the file, worked on the file, saved the file and suddenly I'm getting a "File not readable" error upon open. Running CS6. One file was saved out to CS5 compatible. Created another test file and it saved out and reopened without issue.
    Mac Yosemite. Only update done between opening was an Adobe Flash Player, which really shouldn't affect this.  I've also tried pulling the file again from my cloud account to see if it was corrupted on my desktop...same issue.
    Anyone having this issue and know how to solve for it?

    skredberry,
    Are you saving to your own harddisk?
    It is always recommended here to open/save your documents from/to your own harddisk, then copy to external media/servers/whatever as backup.
    You may be lucky (for a while), but the chances of file corruption and other unpleasantnesses are immensely greater when you use anything but the harddisk.

  • Can not play any video after update to 4.4.2

    Can not play any video after update to 4.4.2, it says always that i have to reconnect my HDMI Cable, reason HDCP error.

    I have made some tests,
    I can only view Trailers, every thing else dosn't work any more. I could not play any Video via Airplay. I tried to do it fom my IPhone 4, my IPad 1 and from my MacBook Pro 15"/i7 2 GHz/Mac OS10.7.2.
    It always says the same error.
    I reset the divice again and made a restore, but the same error.
    I change the HDMI cable, same error.
    It works fine before, I had 4.4.1 on it. I'm using a Toshiba Beamer MT700.
    Need some help

  • What does "File not readable" error message mean?

    I am trying to copy/paste art from a supposed "corrupt" file into a brand new document.  When I paste, I get this particular error message: File not readable.  What, exactly, does this mean?

    Amanda,
    It is nice to know that it works now. Thank you for letting us know.
    Actually, the solution was identical to this part of the list in post #3:
    3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup;
    I ruled that out because in post #2 you wrote
    I have tried EVERYTHING ... Dumped the preferences....
    Ctrl+Alt+Shift/Cmd+Option+Shift is the standard way of deleting = resetting = dumping the basic preferences so I was convinced you had done that already (hence my suggestion to start with 4 and skip 1) - 3)).
    Actually, when you
    4) Move the folder with Illy closed;
    as suggested in post # 3, you move all the preferences to another place so that they are reset to the defaults when you open Illy next time; this procedure is more thorough (and therefore capable of solving more issues) and reversible so you can get the preferences back if it does not help.
    I presume you did not try 4).

  • [svn:fx-trunk] 8690: Remove all of haloclassic since it is not supported any longer

    Revision: 8690
    Author:   [email protected]
    Date:     2009-07-20 12:32:14 -0700 (Mon, 20 Jul 2009)
    Log Message:
    Remove all of haloclassic since it is not supported any longer
    bugs:http://bugs.adobe.com/jira/browse/SDK-20729
    qa: no
    checkintests: pass
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-20729
    Modified Paths:
        flex/sdk/trunk/build.xml
        flex/sdk/trunk/frameworks/build.xml
    Removed Paths:
        flex/sdk/trunk/frameworks/projects/haloclassic/
        flex/sdk/trunk/frameworks/themes/HaloClassic/

    Gordon, it looks like its been a while since you made this post.  Not sure how valid it is now...   I am particularly interested in the LigatureLevel.NONE value.  It seems that it is no longer supported.
    How do I turn of ligatures in the font rendering?
    My flex project involves trying to match the font rendering of Apache's Batik rendering of SVG and ligatures have been turned off in that codebase.  Is there any way (even roundabout) to turn ligatures off in flash?
    Thanks,
    Om

  • In OS 10.7.5 key combination Save As cmd-shft-s does not react any longer

    In OS 10.7.5 key combination Save As cmd-shft-s does not react any longer in any program

    In OS 10.7.5 key combination Save As cmd-shft-s does not react any longer in any program

Maybe you are looking for