I had been using iMessage all along with my friend who is using an iPhone 6. I choose to send a sms to him as I do not have any connection, after that there is no way I can send him an iMessage again. Can anyone advise how do I switch back?
I had been using iMessage all along with my friend who is using an iPhone 6. I choose to send a sms to him as I do not have any connection, after that there is no way I can send him an iMessage again. Can anyone advise how do I switch back? I had tried resetting the network setting, toggling off the sms but to no avail.
Thank you.
Regards
What do you mean you choose to send him an SMS because you don't have any connection. What kind of connection? Delete the thread with that individual that you sent via SMS, and as long as you have iMessage activated on your device and your friend has an active data connection, it should recognize that and send as an iMessage. Another scenario is to have the friend send you a message that you can respond to.
Similar Messages
-
Has anyone else who uses AT&T as their carrier been told if you cannot access your voicemail through your iPhone that there is no way to check your voicemails? This is an issue since I had to send my phone in for repair. Thank you
You received incorrect information from AT&T. You can indeed access your voicemail without your iPhone.
Call AT&T at (800) 331-0500 (assuming you're in the U.S.). This is a 24 hour a day, 7 day a week number. Ask them how to access your voicemail. Normally, you would just do this by dialing your number from another phone, typing "*" once your voicemail recording starts, and entering your password. You don't know your password, so it's probably the last four digits of your phone number or perhaps the seven - or ten-digit phone number. Let the AT&T person tell you. -
My daughter has an iphone 5s and I have her old 3GS. She receives all my imessages that I rcv or send to other people. Can anyone advise how to stop this? we have removed the 3gs from her itunes account but it hasn't stopped the issue.
There are a lot of posts in the forums today with people having problems with iMessage. There was also a published outage yesterday, so it's possible there are still some issues that may be impacting you both.
I would just wait it out - I'm sure it will be sorted out soon. -
i have an apple id that i can't get into because i have forgotten the password and the email that i had it connect to is no longer working because i no longer know the password so i was wondering if there was a way i could send my apple id and password to an new email account thart i now have
Go to https://getsupport.apple.com
(If you see a message that says 'There are no products registered to this Apple ID, simply click on 'See all products and services')
Choose 'More Products & Services', then 'Apple ID'.
A new page will open.
Choose 'Other Apple ID Topics', then 'Lost or forgotten Apple ID password'.
Click the blue 'Continue' button.
Select the contact option that suits your needs best. -
How do I limit the number of emails that show in my active mailbox? There was a way in Settings on ios 6, but i can't find it in ios 7.
You need to delete your current hotmail account set up on your iphone.
Once this has done click 'Add Account' and select the new 'outlook.com' tab.
Set up your hotmail account again from scratch and this will then allow you to select how many weeks/months of emails you sync to your phone.
Im not sure if anyone else had a similar problem to me prior to iOS 7, but if i deleted an email from my hotmail account on my iphone - it wouldnt sync with my actual hotmail account. So when i logged in online all the emails I had deleted on my phone would still be showing as unread.
But by setting the account up as above, they now sync perfectly.
Well for me anyway -
My husband and I are divorcing and we have used his apple ID for our 2 apple tv's. He changed his password and now I no longer have access to the 300 or more movies, tv shows and music. He keeps telling me that , there is no way for us both to have it. So, since his Apple ID was the one programmed into our Apple TV's he has custody to everything. I know there has to be a solution for this, because I can't be the be the only person this has ever happened too!
Unfortunately the situation is thus...
Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID.
Apple ID FAQs
http://support.apple.com/kb/HE37
I know it doesn't help you in your current situation... but you can leave Feedback for Apple here...
http://www.apple.com/feedback/ -
I downloaded the full Ultimate Christmas. I have a corrupt song. I have Windows XP so I can not use the iTunes Cloud. It says that is the only way to re-download songs now is via the Cloud. How do I get a uncorrupted version of my song?
When I thing of the Thousands of dollars I have spent to get a 2000 song library and how Applle keeps screwing Windows users (no back-up of songs) I just think what a fool I was.I did think about that and if I have to I will do that, however there are about 50 songs. I have closed and reopened iTunes several times and I am sure that I have the latest version. It fails right away but I can click on the cloud download icon and download the song that it failed on ... therefore it is not that song "or any one song" causing the issue. Any ideas?
-
Since I've upgraded to Maverick on my Macbook Pro the airpot utility does not recognise that there is a time capsule on the wireless network. I can see the TC using the air port utility on my iPhone5 and on my iPad. What am I doing wrong on my macbook?
I have over 250G backed up and I really don't want to reset everything and start again.
Not sure what you mean here.
A reset will not affect any of the data on the Time Capsule hard drive. You would have to perform a completely separate and very deliberate Erase Disk operation for that to occur.
I'm not recommending that you perform a default reset, but it is an option if there is really nothing else to try.
I don't know if what you are seeing is a Mavericks issue or not, since I refuse to use any new software until at least the first major update with fixes comes along.
Another user may be able to offer more input on Mavericks. -
I want to install a new hard drive on my 2008 MacBook but do not have the instillation discs that came with my computer. Can I use instillation discs from a 2009 or 2010 MacBook? The hard drive I am planning to install is a WD Scorpio Black 500GB SATA 2.5'' internal hard drive.
Sometimes they do work - i've done it before. I have a late 2008 Macbook Uni and used the install dvd of my 2009 Macbook White and it worked.
Why not just clone your hard drive? It'll save you a lot of time doing a clone rather than doing a clean install.
Unless you're having issues with your old set up or your old hard drive is dead.
You can download Carbon Copy Cloner - install your new hard drive in a external usb enclosure (around $10) and clone fromt here then test it before you install it in your Macbook.
Once you've done the swap, you can install your old hard drive in the USB enclosure and use it as a backup drive.
Good luck -
i have bought a used macbook, to bad i do not have the admin password. is there any way to bypass this issue with out the Mac OS X disk? (without loosing my obtained files?) I NEED HELP BADLY PLEASE....
What version of the Mac OS X are you running. Go to the Apple in the upper left corner and select About This Mac and post the version.
-
i have the serial number for my mac mini but I do not have the connection cord. Is there a way I can find specs of this mac mini with just the serial number?
Enter the SN here:
Apple - Support - Check Your Service and Support Coverage
Also:
How to identify Mac mini models -
I just lost files I had been working on all weekend after they synced with the Creative Cloud. This is not what I am paying for. I need these files recovered now, not tomorrow, now!
I have emailed you about resolving this issue.
-
I have a ipod classic 160GB and it's not showing any music anymore, but there is still showing 7GB of memory being used, and I don't have it backed up on my itunes, since I had to put a new hard drive on my computer. Any suggestion to find out whats on that memory or to get it the music back, there is approximately over 1400 songs on it?
What is the memory being used by, is it Other? If it is, that means the iPod can no longer read the music, so it has put it all in "Other".
The usual fix for this is to allow the iPod to Sync with its iTunes Library. If that doesn't work, the next option is to Restore the iPod using the Restore command in iTunes, on the Device/Summary pane.
Unless you are very (very) lucky, I suspect that you are going to have to Restore your iPod. Restoring will remove everything form the iPod and put back onto it only what it finds in your iTunes Library, which you say is currently empty.
If you have to rebuild your Library after this issue, by adding all the music back again, this is going to be hard to hear, but for the future, you may want to consider always having a backup of your library. The easiset way to back the Library up is;
if the Library is small enough, burn it to a DVD, as digital files, not a "music CD".
If your Library is too large for a DVD, buy yourself an external hard drive and copy the Library onto the drive. Remember to update the backup every so often. -
No matter what wi-fi I'm connected to or browser I'm using, webpages take forever to load or they never load at all. Other computers do not have any problems. How can i fix this?
I've tried safari, chrome, firefox...I've cleared the cache as well. This has been going on for several months and used to be tolerable as it was not every website. Now it has become every website and is impossible to deal with. My roommates computer and my cell phone connect fine. I'm fully connected to the router yet websites don't load. I'm using 10.7.5. Thank you!!Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
use a imac os x 10.4.11. I can't access my mail as of late yesterday. Is there a system problem or can I now longer use my .mac email address. I do not have any other device including a phone. thanks
I believe they discontinued all mobile.me accounts yesterday. It's been in the planning for a long time with lots of notification. I believe you can still get access to the e-mail from Tiger but you'd need to browse past discussions on this forum for details on how.
Maybe you are looking for
-
Timestamp of videos not consistent with photos - appear out of order - bug or user error?
We just returned from Hawaii and, of course, we have a mix of photos and videos. However, subsequent photos and videos taken about the same time, which should have timestamps minutes apart, have timestamps that differ by 4 hours. As I dig into this
-
New OS, new scanning software, and Photoshop 7
I now have a new computer running Windows 7 (64-bit). My Photoshop 7 still works, as does my Arcus II scanner. However, Fotolook 3.6 doesn't, and I am now experimenting with VueScan. Photoshop 7 has 8-bit and 16-bit options in the Image -> Mode secti
-
Acrobat 8 Disappears after a few seconds
Hi Guys I do not use PDF's to the point I need to upgrade so having Acrobat 8 is good enough for me, but all of a sudden if disappeers after a few seocnds on opening. I have lloked at uggestion via Google but none have helped. If this si a known bug
-
[SOLVED] lost pacman sync db of installd pakages
hi. as I said, I lost pacman database off installd pakages. ─(simke@philander:pts/0)─────────────────────────────────────────────────(~)─┐ └─(21:33:%)── pacman -Q ──(Mon,May18)─┘ ┌─(simke@philander:pts/0)──────────────────────────────────────────────
-
My environment: Oracle Workgroup Server for Windows NT (Version 7.3.4) Can anyone, who can connect the Oracle database with a legal db account through the SQL*Plus, run the command ‘HOST’ normally? How to limit the usage of command ‘HOST’? Thanks!