EDI Integration---Using Seeburger Adapter
Hi All,
I have a below requirement.
EDI----->XI--
>SAP and vice versa.
I am new to EDI integration,i would like to know the procedure steps to do the above scenario.
Thanks in advance,
AVR
Hi,
How you want to communicate with the EDI system... If it is using AS2 adapter, then you need to purchase it from seeburger and configure it in the sender side and receiver side it'll be Idoc adapter. And in the ESR you need to import the xsd of EDI document under external definitions and map it to the idoc.Please refer the below links it may help you.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10b17369-9522-2c10-84a6-d75d8a8ace22
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=221354005
http://wiki.sdn.sap.com/wiki/display/XI/SeeburgerSuiteforSAPPI
Handling EDI interfaces using Seeburger BIC modules
Regards,
Priyanka
Similar Messages
-
EDI integration thru seeburger
Hi Folks,
Scenario: ECC sends PO (orders Idoc) 850 to PI and then PI sends to EDI subsystem using seeburger (AS2 protocol).
EDI system has to send PO order acknowledgment 855 to PI and then to ECC.
1) whether Seeburger adapter supports synchronous scenario ?
2) Please suggest some input reg. this.
3)
Is it good for ECC integration with EDI system using PI (ie seeburger),
Please give comments on Pros and Cons (any way Seeburger adapter licence cost associated)
a) in terms of time line with out PI , how it goes?
Thanks in advance
Regards,
Praba
Edited by: Prabaharan Rangasamy on Mar 16, 2010 2:23 AMHi,
If you have already PI System in your landscape you can definetly go for ECC ,EDI System integration with PI using seeburger.
Many customers implemented the same integrations.
Wiithout PI ,are you planning to use someother middleware???? if NO,then withput midleware its very difficult integrate SAP System with EDI System.
Regards,
Raj -
EDI TRADACOM through Seeburger Adapter into PI
Has anybody configured communication channel in PI using Seeburger Adapter to convert EDI TRADACOM into xml ?
Is there a useful tutorial to have a look at ?>>Has anybody configured communication channel in PI using Seeburger Adapter to convert EDI TRADACOM into xml ?
Yes
>>Is there a useful tutorial to have a look at ?
Well, there is nothing specific avauilable for TRADACOM. TRADACOM is just a type of format as we have EDIFACT OR X12. You can search for EDIFACT related articles/blogs on SCN (there are many). The only thing you then need is to use TRADACOM related mapping name in BIC module wherever you see EDIFACT mapping name.
One more thing, for using TRADACOM, there is a separate licence where Seeburger provides the TRADACOM related SWC with all the formats. So talk to Seeburger about this as well.
Regards,
Prateek Raj Srivastava -
Error in Oubound message using Seeburger Adapter
Hi,
I'm getting this error on the Adapter engine when trying to generate an outbound EDI message with Seeburger adapter:
2007-01-24 13:33:29 Error Unable to forward message to JCA adapter. Reason:
Fatal exception: com.seeburger.xi.connector.queue.QueueEntryRejectedException:
Entry rejected due to error in resource management: null, Entry rejected due to
error in resource management: null
2007-01-24 13:33:29 Error MP: exception caught with cause
javax.resource.ResourceException: Fatal exception:
com.seeburger.xi.connector.queue.QueueEntryRejectedException: Entry rejected due
to error in resource management: null, Entry rejected due to error in resource
management: null
2007-01-24 13:33:29 Error Exception caught by adapter framework: Fatal
exception: com.seeburger.xi.connector.queue.QueueEntryRejectedException: Entry
rejected due to error in resource management: null, Entry rejected due to error
in resource management: null
2007-01-24 13:33:29 Error Delivery of the message to the application using
connection File_http://sap.com/xi/XI/System failed, due to:
com.sap.aii.af.ra.ms.api.RecoverableException: Fatal exception:
com.seeburger.xi.connector.queue.QueueEntryRejectedException: Entry rejected due
to error in resource management: null, Entry rejected due to error in resource
management: null: javax.resource.ResourceException: Fatal exception:
com.seeburger.xi.connector.queue.QueueEntryRejectedException: Entry rejected due
to error in resource management: null, Entry rejected due to error in resource
management: null.
Any ideas?
Rgds,
YvesYves,
I think there is some problem in invoking the seeburger adapter. Have you installed the adapter? Also after installing you have to import the metadata. Check this document for further help:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6dc02f5d-0601-0010-cd9d-f4ff9a7e8c33
---Satish -
Enveloping using Seeburger adapter
For the ones using Seeburger adapters...
How are you coding you envelope tempate (ISA/GS envelope template) using Seeburger adapter as EDI tool. Do you code each and every one of your transaction type / trading partner?
And how do you, for example, send or configure 1 transaction per envelop used for 820s or 100 transactions per envelop for 814s?
Can one you tell how are accomplishing these functions?
Thank you,
Pamreposting....
Thanks, Pam -
Without using Seeburger Adapter can we convert EDI 864 TC to XML
Hello Friends,
Can we convert 864 Transaction code (Text Message) to XML with out an External adapter like Seeburger Adapter? I mean can we write a code in JAVA for conversion? If so, what should i use in that Java code?Hi
These blog can help u....
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
/people/srinivas.vanamala2/blog/2006/12/11/edi-basics
Already discussed thread:
EDI Conversion
Re: Seeburger Splitter adapter!!
Regards
Santhosh
Remember to set the thread to solved when you have received a solution -
EBS - EDI Integration using SOA Suite EBS Adapter
Hi, We would be receiving EDI 850 PO document in Oracle B2B. We want to update this EDI 850 document in EBS. We are using EBS Adapter. But we don't have much idea on how EDI method works in EBS. Couldn't find much references for implementation. Pls. provide some details if you have done this before.
Thanks!Do you have SOA installed and integrated with R12? If not, please see these docs.
Integrating Oracle E-Business Suite 12.1.3 with BPEL in SOA Suite 11g [ID 1070257.1]
Useful Articles for the Oracle E-Business Suite Technology Stack for Technical Consultant / DBA [ID 828157.1] -- SOA/BPEL/Webservices
Integrating Oracle E-Business Suite Release 12 with Oracle BPEL available in Oracle SOA Suite 11g [ID 1321776.1]
Installing Oracle E-Business Suite Integrated SOA Gateway, Release 12 [ID 556540.1]
Troubleshooting and Known Issues for EBS SOA Suite Deployment in R12.1.1 [ID 797596.1]
Thanks,
Hussein -
EDI Integration using PI with third party connectors
Hi Experts ,
I would like to know the extra cost factors associated if going for EDI integration with PI with third party connectors like seeburger .
1. We have NW 2004s ECC installed . Do we need to purchase PI separately? If yes how much will it cost ?
2. How licensing will happen in case of PI ?
3. How much Seeburger will cost ? Is there any sort of AMC associated with seeburger
4. Do we install Seeburger and PI on the same box ?
5. How will be the landscape with Seeburger Instance ?
6. How we will be able to move Seeburger Objects across the landscape ? DEV->QA->PRD
Regards ,Santosh Rawat wrote:>
> Hi Experts ,
>
> I would like to know the extra cost factors associated if going for EDI integration with PI with third party connectors like seeburger .
>
> 1. We have NW 2004s ECC installed . Do we need to purchase PI separately? If yes how much will it cost ?
Yes your need to but PI separately,its independed product,its not come with ECC.
> 2. How licensing will happen in case of PI ?
Better to talk with SAP Sales team,they will help you with genuine answers.
> 3. How much Seeburger will cost ? Is there any sort of AMC associated with seeburger
Its depends on which See Burger Adapter You are going to use,.
> 4. Do we install Seeburger and PI on the same box ?
Yes ,we need to deploy the seeburger drivers on PI Server.
> 5. How will be the landscape with Seeburger Instance ?
google it,you wil find the answer i am not sure
> 6. How we will be able to move Seeburger Objects across the landscape ? DEV->QA->PRD
As per my knowledge when you develop any interface using seer burger adapter or predefined mappings,its same procedure to transport also.
Regards,
Raj -
IDOC to EDI Scenario using Seeburger....
Hi Experts,
On the Scenario IDOC to EDI when will I use As2 adapters or SFTP adapters of seeburger or just a simple FIle adapter?
and any idea what are the modules I need to import on my comm channel using file adapter?
Thanks.Hello
Check this blog: /people/rajeshkumar.pasupula/blog/2009/08/05/wanna-implement-seeburger-for-edi-find-the-booster
Regards
Mark -
Integration of Seeburger Adapter in Solution Manager for Monitoring
Hi Experts ,
Can we Integrate the monitoring of Seeburger adapter into the Solution Manager dashboard under central PI Monitoring ?
We are using AS2, FTP and sSFTP seeburger adapters here.
Regards,
Kamal
Edited by: KAMAL KUMAR on Jan 11, 2012 2:33 PMHi,
check [this.|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/408e1501-fb8c-2e10-edba-f51f13cde64e?QuickLink=index&overridelayout=true]
Page 29 has useful information on adapter/channel monitoring.
-santosh. -
Mainframe Integration using File Adapter (FTP Mode):: ftp commands
Hi,
We are trying to integrate with Mainframe system using File Adapter. (FTP mode). We are able to write the file to Mainframe system but not able to format it properly. We had to provide FTP parameter, <b>ftp.quote site recfm=fb lrecl=150</b>
As per SAP Note 801926 :: XI 3.0 File Adapter: Additional Parameters, the only parameter that can be used is <b>ftp.timeout</b>. Has anyone tried out using other FTP parameters? (like ftp.quote)
Any help is grealy appreciated.
Regards,
Siva MarananiI am looking at running some OS commands especially the QUOTE SITE FILENAME, and found this OSS note:
https://service.sap.com/sap/support/notes/841704
In this note it says...
"Note that for the File Adapter transport protocol "FTP", the operating system command is NOT executed on the FTP server, but on the server hosting the Adapter Engine." -
EDI on XI without using SeeBurger Adapter
We're about to begin a project to do EDI on XI. We'd like to know about all options we have in addition to just using the recommended SeeBurger EDI adapter. We have a 3rd party middleware tool we could use as well. We'd like to leverage the knowledge we already have in this product. Let me know if this is a feasible architecture.
- XI handles all the SAP communication.
- 3rd party middleware vendor tool handles all EDI mappings, and also handles all communication with partners via AS2, FTP, etc.
- Communication between XI and 3rd party middleware is accomplished thru SOAP/web services or direct HTTP calls.
Under this architecture, i'm not exactly sure what XI buys us as we could communicate directly to SAP without XI but lets leave it as is for now.
Is this a feasible option?? Assume the extra development of the maps is not a major consideration since our business requirements would cause us to modify any out of the box mappings SeeBurger would provide anyway.
Has anyone else implemented EDI via an adapter outside of SeeBurger's??hello
ur architecture seems to be ok becuase as of now i have'nt heard of XI supporting AS2 features..i guess u can configure a partner in XI in configuration builder and then create a communication channel for the same with the transport protocol as HTTP or SOAP.u can apply security over here by configuring necessary certificates..
regarding XI usage goes what third party middleware ur using..check whether it offers flexible mapping capabilities like XI (with GUI maps, XSLT or Java maps etc) or BPM capabilities (which u may require in future) and message persistence capabilities etc..
also now XI is free with NetWeaver 2004s licence.
Regards
Rajeev -
EDI Message in Seeburger adapter
Hi All,
is there any posibilities to see the signed EDI message (encrypted format) in seeburger module
please guide me the procedure
by
BoopalanHi Prateek Raj,
s i have done all config in Sender communication chennel & Sender Agreement
s custumer need MDN, which they can receive successfully
the same process which we did for anoterher customer its working fine
in AS2 Adapter Guid they mentioned the solution for the error Error while parsing AS2 message: AUTHENTICATION_ERROR is Check the authentication certificate settings.
but using the same certificate we can able to send & customer can able to decrypt the EDI Message
where the problem could be..?
by
boopalan -
XI-BW Integration using RFC adapter?/
How to update bw ods using rfc adapter
Hi tariq,
data migration from BI or BW to XI is the most bussiness used application
pls check the link it gives complete details
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/webinars-nw-rig/bi%20xi%20integration.pdf
/people/kamaljeet.kharbanda/blog/2005/09/16/xi-bi-integration
Interfacing data into BW using Perl, Ruby, or Python
/people/piers.harding/blog/2005/11/18/interfacing-data-into-bw-using-perl-ruby-or-python
/people/kamaljeet.kharbanda/blog/2005/09/14/sap-netweavercomplete-information-integration-platform
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8c10aa90-0201-0010-98a0-f071394bc9ae
pls do chk this
if it worth pls do the req
Thanx
Sampath -
Additional Attributes in AS2 Header using Seeburger Adapter
Hello,
our business partner required that we include some additional attributes in the AS2 mime header that are used for internal routing purposes (in addition to the AS2 ID).
Attributes for example include a submissionType etc. Is it somehow possible to add this attributes? According to the documentation I can only add dynamicAttributes for standard fields, such as content type etc.
Thank you for your support.
Edited by: Florian Guppenberger on Oct 6, 2009 7:14 PMHi,
I think you can.. but not recommended to modify standard Adapters.
Check the below blog.
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417500)ID0328214750DB00705897531357746266End?blog=/pub/wlg/4645
Why dont you use Message subject or Content type ?
Thanks
Deepthi.
Maybe you are looking for
-
Sorry an error has occured while installing Adobe AIR
I am using Window XP and login as administrator. I tried to install the Adobe AIR many times and still receive the same error. Can you please help me to install the Adobe AIR? Sorry, an error has occured An error occured while installing Adobe AIR.
-
HT4528 unable to connect to the itunes store on my ipone 4
i am unable to connect to the itunes store on my ipone 4. when i click on the app, it opens to the last screen that was accessed in the store, then closes. rebooting the phone did not help. Alxo i recently downloaded items thru itunes on my pc and th
-
I would like to Implement the TREX
Hi All, Our current portal version is 7.0 sp9 . i would like to know , What is the procedure for checking, whether TREX is installed in my system or not. If it is installed , what are the madatory things or check list for checking the all the insta
-
How to Reschedule the WO genereted thru a PM plan
Dear all, I have a Preventive maintenance plan, it will generate a work order on monthly basis. But my operation department want to control the release of work order to Maintenance department. How can we do this in usual practice. Thank you.
-
I need to use Toast to burn my completed iDVD project. Worked a looong time making it perfect with formatting using Themes, custom Text pages, etc... I'd hate to lose all that, but need to use Toast to compress the video to fit a Single Layer DVD. Do