Editing a particular row in a table - Web Dynpro Abap

Hi all,
My scenario is, I have to fetch contract details from EKPO table when I enter the Purchase Document Number and press SUBMIT button on my interactive form. The details will be displayed in a table.
    This part is working fine.
Then, out of the displayed rows in that table, I have to click one of the rows. This particular row should appear as a separate row below the existing table. Here I will edit certain fields and update the database.
My question is, How to display that particular row below the existing table which I select. The table will dynamically increase the row size depending on the records.

Hi Surya,
You can use the index property to display the selected row data.
Suppose your form structure is like:
BodyPage
   TBL_EKPO
       DATA
           EBELN
           EBELP
           LOEKZ
    SF_SELECTED_ROW_DISPLAY
        EBELN
        EBELP
        LOEKZ
Then, in any of the field's exit event you can write:
BodyPage.SF_SELECTED_ROW_DISPLAY. EBELN.rawValue = xfa.resolveNode( " BodyPage.TBL_EKPO.DATA["+ this.parent.index +"].EBELN").rawValue;
Hope this helps.
Amit

Similar Messages

  • Row selection in Table (Web Dynpro Abap)

    Hello,
    I have 2 views in my web dynpro component.
    In first view ,  i am taking carrid and on click of submit button , i am displaying connid,fldate,currency,planetype,seatsmax in second view.
    I have one button on second view to go back to fist screen.
    Now, My question is :
    if i select a one row of table , i want to dispaly deatils of that row in first view.
    How can i do this?
    Please help.

    The second part of the requirement is not clear on where woudl you click and where shoudl the data be shown.
    However, all this data should be ideally maintained in the component controller i.e. the c.controller should have the conterxts and map relevant nodes to the appropriate views.
    Now, all the data is in c.controller which can be accessed from any view within the component. This way you can show any data in contexts in preferred view.
    Regards,
    Sharath

  • How to edit a particular row in the table ctrl when a push button is clickd

    Hi Experts,
    How to edit a particular row (except the Primary keys) after selecting it in the TABLE CONTROL when a
    push button is clicked in the table control.
    For Eg. If you have a push button say "Modify", the particular row what we select in the table control should be in a
    editable mode after clicking "Modify" Push button.
    Please help me out.
    Thanks in advance.

    Hey Ram,
    Thanks a ton.
    Its working fine...sorry for the late reply.
    The reason behind the delay is because i had modified my code as per your logic it worked fine but the thing is that the whole column was in editable mode but not a single row.
    For E.g  If i want to edit a particular row, first i select the row and then  click on "Modify" button. After i click on the button, the whole column gets in a editable mode including the one which i intentionally selected.
    Here, the solution is that you have to set a flag in PBO so that once it is done with PBO then it need not come back again after we click on "Modify" button.
    And one more query is that after you modify a particular row in the table control ( When it is in editable mode) and click on the "Save" button, it is not getting updated to database.
    To update the database, we need to select the row once again after modifying it and click on the "Save" button.
    Here, database is updating only when it is selected again. If it is not selected, it is not getting updated.
    If you have any alternative solution, then please help me out.( I hope i am clear with the question.)
    Thanks,
    Ananth.

  • Hiding Table - Web Dynpro ABAP

    Hi,
    Is there a way to hide a whole table if it is empty?
    Which method or path should I use in order to hide the table?
    Thanks,
    Erick

    Hi Erick,
    You do not use any method and but bind the property 'visible' of table to a context attribute.
    Here are the detailed steps:
    1) Goto the layout of your view.
    2) Double click on table element.
    3) On the RHS, you see many properties, goto property Visible and bind it to a context attribute. The purpose of this context attribute is to control visibility and hence you would have to add this to your context.
    4) Set the value of this context attribute to Visible or not depending on the data. Check table documentation for more details.
    Regards,
    Srini.

  • Display and edit currently selected row of ADF Table in ADF Form

    I have an ADF Read-only Table and ADF Form, which were created from the same Data Control.
    I need to be able to edit the selected row of the table in the form (just like in "Binding Data Controls to your JSF page" part of "Developing RIA Web Applications with Oracle ADF" Tutorial). However, I can't figure out how to do this :(
    I found the following solution on the Web: #{bindings.DeptView1.currentRow.dataProvider.dname} - but it doesn't work, since "the class oracle.jbo.server.ViewRowImpl does not have the property dataProvider".
    Sorry for the newbie question.
    Thanks in advance for any help!

    Hi,
    AFAIK, dataProvider is not supported on ADF BC, hence the error.
    If you have created ADF Read only table and form from the same data control you just need to refresh the form based on table selection to show up the selected record, to do which you just need to add partialTriggers property to the panelFormLayout and set its value to the id of table
    Sireesha

  • How to display particular ROW of a table control in display/change mode

    Hi,
    Can we make particular ROW in a table control display mode or editable mode depending upon the conditions?.
    Any inputs..
    Rgds,
    Lakshmiraj

    Hi,
    Yes it is possible. check the follwoing code for help.
    *&  Include           Z101954_ASSIGNMENT1I01
    *&      Module  VALIDATE_SALES_ORG  INPUT
          text
    MODULE validate_sales_org INPUT.
    SELECT SINGLE zvkorg FROM vbak INTO zvbak-zvkorg
    *WHERE zvbeln = zbookhdr-zvbeln.
    IF sy-subrc <> 0.
       MESSAGE 'INVALID AIRLINE ID INPUT' TYPE 'I'.
       CALL SCREEN 1000.
    ENDIF.
    ENDMODULE.                 " VALIDATE_SALES_ORG  INPUT
    *&      Module  USER_COMMAND_1001  INPUT
          text
    MODULE user_command_1001 INPUT.
      var3 = 1.
      IF sy-ucomm <> 'SAVE'.
        PERFORM material_check.
        IF sy-subrc <> 0.
          MESSAGE 'ENTER THE CORRECT MATERIAL NUMBER' TYPE 'I'.
        ELSE.
          SELECT SINGLE zmaktx zmeins zwaerk zstprs FROM zmara
            INTO CORRESPONDING FIELDS OF it_salesitems
             WHERE zmatnr = it_salesitems-zmatnr.
          SELECT SINGLE zwerks zlgort FROM zorg
            INTO CORRESPONDING FIELDS OF it_salesitems
            WHERE zvkorg = wa_salesorder-zvkorg
             AND zvtweg = wa_salesorder-zvtweg
             AND zspart = wa_salesorder-zspart.
          it_salesitems-znetwr = it_salesitems-zstprs * it_salesitems-zbrgew.
         MODIFY it_salesitems FROM it_salesitems  INDEX sy-tabix.
          MOVE-CORRESPONDING it_salesitems TO temp_salesitems.
          APPEND temp_salesitems.
          REFRESH it_salesitems.
        ENDIF.
      ENDIF.
    LOOP AT temp_salesitems.
      if it_salesitems-pick = 'X'.
               LOOP AT SCREEN.
             IF screen-name EQ 'DETAIL'.
               screen-input = 1.
               MODIFY SCREEN.
             ENDIF.
           ENDLOOP.
           endif.
           endloop.
      CASE sy-ucomm.
        WHEN 'SAVE'.
          PERFORM check_ship_to_party.
          IF sy-subrc <> 0.
            MESSAGE 'ENTER THE CORRECT SHIP TO PARTY ' TYPE 'I'.
          ELSE.
            PERFORM check_payer.
            IF sy-subrc <> 0.
              MESSAGE 'ENTER THE CORRECT PAYER' TYPE 'I'.
            ELSE.
              PERFORM check_bill_to_party.
              IF sy-subrc <> 0.
                MESSAGE 'ENTER THE CORRECT BILL TO PARTY' TYPE 'I'.
              ELSE.
                wa_salesorder-zernam = sy-uname.
                MOVE-CORRESPONDING wa_salesorder TO zvbak.
                MODIFY zvbak.
                LOOP AT it_salesitems.
                  it_salesitems-zvbeln = wa_salesorder-zvbeln.
                  MOVE-CORRESPONDING it_salesitems TO zvbap.
                  MODIFY zvbap.
                ENDLOOP.
                IF sy-subrc = 0.
                  MESSAGE 'THE DATA IS SAVED SUCCESSFULLY' TYPE 'I'.
                  CLEAR wa_salesorder.
                  REFRESH it_salesitems.
                  REFRESH temp_salesitems.
                  IF sy-tcode = 'ZVA01'.
                    CALL SCREEN '1000'.
                  ELSE.
                    CALL SCREEN '1003'.
                  ENDIF.
                ENDIF.
              ENDIF.
            ENDIF.
          ENDIF.
        WHEN 'DETAIL'.
          CALL SCREEN '1002'.
        WHEN 'BACK'.
          IF sy-tcode = 'ZVA03'.
            CLEAR wa_salesorder.
            CALL SCREEN '1003'.
          ELSE.
            PERFORM pop_up.
          ENDIF.
        WHEN 'EXIT'.
          IF sy-tcode = 'ZVA03'.
            LEAVE PROGRAM.
          ELSE.
            PERFORM pop_up.
          ENDIF.
        WHEN 'CANCEL'.
          IF sy-tcode = 'ZVA03'.
            CLEAR wa_salesorder.
            CALL SCREEN '1003'.
          ELSE.
            PERFORM pop_up.
          ENDIF.
      ENDCASE.
    ENDMODULE.                 " USER_COMMAND_1001  INPUT
    *&      Module  input_help_sold_to_party  INPUT
          text
    MODULE input_help_sold_to_party INPUT.
      SELECT zkunag FROM zvbak INTO CORRESPONDING FIELDS OF TABLE
        itab.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
      DDIC_STRUCTURE         = ' '
          retfield               = 'ZKUNAG'
      PVALKEY                = ' '
         dynpprog               = sy-cprog
         dynpnr                 = '1000'
         dynprofield            = 'ZKUNAG'
      STEPL                  = 0
      WINDOW_TITLE           =
      VALUE                  = ' '
         value_org              = 'S'
      MULTIPLE_CHOICE        = ' '
      DISPLAY                = ' '
      CALLBACK_PROGRAM       = ' '
      CALLBACK_FORM          = ' '
      MARK_TAB               =
    IMPORTING
      USER_RESET             =
        TABLES
          value_tab              = itab
      FIELD_TAB              =
      RETURN_TAB             =
      DYNPFLD_MAPPING        =
    EXCEPTIONS
      PARAMETER_ERROR        = 1
      NO_VALUES_FOUND        = 2
      OTHERS                 = 3
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDMODULE.                 " input_help_sold_to_party  INPUT
    *&      Form  pop_up
          text
    -->  p1        text
    <--  p2        text
    FORM pop_up .
      CALL FUNCTION 'POPUP_TO_CONFIRM'
        EXPORTING
      TITLEBAR                    = ' '
      DIAGNOSE_OBJECT             = ' '
          text_question               = 'DO YOU WANT TO SAVE THE ORDER?'
         text_button_1               = 'YES'(001)
         icon_button_1               = ' '
         text_button_2               = 'No'(002)
         icon_button_2               = ' '
         default_button              = '1'
         display_cancel_button       = 'X'
         userdefined_f1_help         = ' '
      START_COLUMN                = 25
      START_ROW                   = 6
      POPUP_TYPE                  =
      IV_QUICKINFO_BUTTON_1       = ' '
      IV_QUICKINFO_BUTTON_2       = ' '
    IMPORTING
         answer                      = ans
    TABLES
      PARAMETER                   =
    EXCEPTIONS
      TEXT_NOT_FOUND              = 1
      OTHERS                      = 2
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      CASE ans.
        WHEN '001'.
          PERFORM check_ship_to_party.
          IF sy-subrc <> 0.
            MESSAGE 'ENTER THE CORRECT SHIP TO PARTY ' TYPE 'I'.
          ELSE.
            PERFORM check_payer.
            IF sy-subrc <> 0.
              MESSAGE 'ENTER THE CORRECT PAYER' TYPE 'I'.
            ELSE.
              PERFORM check_bill_to_party.
              IF sy-subrc <> 0.
                MESSAGE 'ENTER THE CORRECT BILL TO PARTY' TYPE 'I'.
              ELSE.
                wa_salesorder-zernam = sy-uname.
                MOVE-CORRESPONDING wa_salesorder TO zvbak.
                MODIFY zvbak_101954.
                temp_salesitems-zvbeln = wa_salesorder-zvbeln.
                MOVE-CORRESPONDING temp_salesitems TO zvbap.
                MODIFY zvbap.
                IF sy-subrc = 0.
                  MESSAGE 'THE DATA IS SAVED SUCCESSFULLY' TYPE 'I'.
                  CLEAR wa_salesorder.
                  REFRESH it_salesitems.
                  REFRESH temp_salesitems.
                  IF sy-ucomm = 'EXIT'.
                    LEAVE PROGRAM.
                  ENDIF.
                  IF sy-tcode = 'ZVA01'.
                    CALL SCREEN '1000'.
                  ELSE.
                    CALL SCREEN '1003'.
                  ENDIF.
                ENDIF.
              ENDIF.
            ENDIF.
          ENDIF.
        WHEN '002'.
          IF sy-tcode = 'ZVA01'.
            CLEAR wa_salesorder.
            REFRESH it_salesitems.
            REFRESH temp_salesitems.
            CALL SCREEN '1000'.
          ELSE.
            CLEAR wa_salesorder.
            REFRESH it_salesitems.
            REFRESH temp_salesitems.
            CALL SCREEN '1003'.
            CLEAR ans.
          ENDIF.
      ENDCASE.
    ENDFORM.                    " pop_up
    *&      Module  USER_COMMAND_1002  INPUT
          text
    MODULE user_command_1002 INPUT.
    IF sy-datar = 'X'.
       PERFORM material_check.
       IF sy-subrc <> 0.
         MESSAGE 'ENTER THE CORRECT MATERIAL' TYPE 'I'.
       ELSE.
         SELECT SINGLE zmaktx zmeins zwaerk zstprs FROM zmara_101954
         INTO CORRESPONDING FIELDS OF wa_salesitems
           WHERE zmatnr = wa_salesitems-zmatnr.
         wa_salesitems-znetwr =  wa_salesitems-zstprs * wa_salesitems-zbrgew.
       ENDIF.
       var = 1.
    ENDIF.
      IF sy-ucomm = 'BACK'.
        LOOP AT temp_salesitems.
          MODIFY temp_salesitems FROM wa_salesitems .
        ENDLOOP.
        it_salesitems-pick = ' '.
        CALL SCREEN '1001'.
      ENDIF.
    ENDMODULE.                 " USER_COMMAND_1002  INPUT
    *&      Module  USER_COMMAND_1000  INPUT
          text
    MODULE user_command_1000 INPUT.
      CASE sy-ucomm.
        WHEN 'NEXT'.
          SELECT * FROM zt001k_101954 INTO CORRESPONDING FIELDS OF
            temp_salesorder WHERE
            zvkorg = wa_salesorder-zvkorg AND
            zvtweg = wa_salesorder-zvtweg AND
            zspart = wa_salesorder-zspart.
          ENDSELECT.
          IF sy-subrc = 0.
            CALL SCREEN '1001'.
          ELSE.
            MESSAGE 'Invalid Data Entered' TYPE 'I'.
            CALL SCREEN '1000'.
          ENDIF.
      ENDCASE.
    ENDMODULE.                 " USER_COMMAND_1000  INPUT
    *&      Module  USER_COMMAND_1003  INPUT
          text
    MODULE user_command_1003 INPUT.
      IF sy-ucomm = 'NEXT'.
       IF sy-datar = ' '.
         MESSAGE 'ENTER PURCHASE ORDER NUMBER' TYPE 'I'.
         CALL SCREEN 1000.
        IF NOT wa_salesorder-zvbeln CO '0123456789'.
          MESSAGE 'PURCHASE ORDER NUMBER IS NOT IN THE EXPECTED FORMAT' TYPE 'I'.
          CALL SCREEN '1003'.
        ENDIF.
        var3 = 0.
        CALL SCREEN '1001'.
      ENDIF.
    ENDMODULE.                 " USER_COMMAND_1003  INPUT
    *&      Module  input_help_sales_order  INPUT
          text
    MODULE input_help_sales_order INPUT.
      SELECT zvbeln FROM zvbak_101954 INTO CORRESPONDING FIELDS OF TABLE
      itab1.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
      DDIC_STRUCTURE         = ' '
          retfield               = 'ZVBELN'
      PVALKEY                = ' '
         dynpprog               = sy-cprog
         dynpnr                 = '1003'
         dynprofield            = 'ZVBELN'
      STEPL                  = 0
      WINDOW_TITLE           =
      VALUE                  = ' '
         value_org              = 'S'
      MULTIPLE_CHOICE        = ' '
      DISPLAY                = ' '
      CALLBACK_PROGRAM       = ' '
      CALLBACK_FORM          = ' '
      MARK_TAB               =
    IMPORTING
      USER_RESET             =
        TABLES
          value_tab              = itab1
      FIELD_TAB              =
      RETURN_TAB             =
      DYNPFLD_MAPPING        =
    EXCEPTIONS
      PARAMETER_ERROR        = 1
      NO_VALUES_FOUND        = 2
      OTHERS                 = 3
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDMODULE.                 " input_help_sales_order  INPUT
    *&      Module  back_command  INPUT
          text
    module back_command input.
    *if sy-ucomm = 'SAVE' OR 'BACK' OR 'DETAIL' OR 'EXIT' OR 'CANCEL'.
    *endif.
    endmodule.                 " back_command  INPUT
    Regards
    Rajesh Kumar

  • Locking a particular row in a table control

    Hi All,
    I have module pool program in which table control is used. I would like to know whether it is possible to lock a particular row in the table so that another person will not be able to edit it until the first user completes his work. It should be only for that particular record which is being currently edited in the table.

    Hi,
      Yes you can lock particular row in a table control..
      In the flow logic..
    PROCESS BEFORE OUTPUT.
      LOOP AT itab INTO wa WITH CONTROL tc.
         MODULE disable_row.
      ENDLOOP.
      MODULE disable_row.
    * call the Enqueue function module..If the
        IF sy-subrc NE 0.
          LOOP AT screen.
               SCREEN-INPUT = 0.    " Disable for input
               MODIFY SCREEN.
          ENDLOOP.
       ENDIF.
      ENDMODULE.
    Thanks
    Naren

  • How to set fire action event for particular rows in a table

    HI All,
    I have a requirement in which I want to set fire action event for particular rows in a table based on some condition.
    The table has columns like fullname,employee id etc.
    So i want to set fire action event for particulars rows only which will saisfy some condition.

    Atanu,
    Your approach(setting fire action for few rows) seems not possible. Better to go ahead with workaround.
    Do you want this functionality in processRequest(while page loading) or processFromRequest(on some event) method ? Give more explanation regd. your requirement ?
    In either case loop through the rows and when your condition is met write the action to be performed in controller.
    Regards,
    Anand

  • How to delete a particular row in ALV table

    Hi,
    How to delete a particular row in ALV table based on some condition(by checking value for one of the columns in a row)
    Thanks
    Bala Duvvuri

    Hello Bala,
    Can you please be a bit more clear as to how you intend to delete the rows from your ALV? By the way deleting rows from an ALV is no different from deleting rows from a normal table. Suppose you have enabled selection property in ALV & then select multiple rows and click up on a button to delete the rows then below would be the coding: (Also keep in mind that you would have to maintain the Selection property of the context node that you are binding to your ALV to 0..n)
    data : lr_table_settings  TYPE REF TO if_salv_wd_table_settings,
                 lr_config          TYPE REF TO cl_salv_wd_config_table.
      lr_table_settings  ?= lr_config.
    ** Setting the ALV selection to multiple selection with no lead selection
      lr_table_settings->set_selection_mode( value = cl_wd_table=>e_selection_mode-multi_no_lead ).
    Next delete the selected rows in the action triggered by the button:
    METHOD onactiondelete_rows .
      DATA:  wd_node TYPE REF TO if_wd_context_node,
             lt_node1 TYPE ig_componentcontroller=>elements_node,
             wa_temp  TYPE REF TO if_wd_context_element,
             lt_temp  TYPE wdr_context_element_set,
             row_number TYPE i VALUE 0.
      wd_node = wd_context->get_child_node( name = 'NODE' ).
      CALL METHOD wd_node->get_selected_elements
        RECEIVING
          set = lt_temp.
      LOOP AT lt_temp INTO wa_temp.
        wd_node->remove_element( EXPORTING element = wa_temp ).
      ENDLOOP.
      CALL METHOD wd_node->get_static_attributes_table
        EXPORTING
          from  = 1
          to    = 2147483647
        IMPORTING
          table = lt_node1.
      wd_node->bind_table( new_items = lt_node1 ).
    ENDMETHOD.
    If in case this isn't your requirement please do let me know so that I can try come up with another analysis.
    Regards,
    Uday

  • In Web Dynpro ABAP, Can we merge two cells of a row in a table ?

    In Web Dynpro ABAP, Can we merge two cells of a row in a table ?

    Hallo Jagannatha,
    the new table feature is available in SAP NetWeaver 7.0 EhP2 (SAP ERP 6.0 EhP5, SAP Business Suite 7i2010) named 'TableMultiEditorCell'. See [SAP Online Help|http://help.sap.com/saphelp_nw70ehp2/helpdata/en/9b/46bb0d339b42cc8d30636ca0c9f5b6/frameset.htm] for more details ...
    "This UI element is a table cell variant that enables several UI elements to be placed in one table cell. This type of cell can be used for "one click actions". ...
    Regards, Bertram

  • Web DynPro ABAP - Disable a entire row in the Table of the output.

    Hi Web Dynpro Experts,
    Need ur Help.!
    I have a requirement to disable the one row of the table in web dynpro ABAP
    For example . my table is like
    Field1   Field2
    A           Success
    B            Failure
    C            Failure
    I need to allow the User to select the record only if its status is Success,if status is Failure then i should not the allow user to select.
    This enabling and disabling of the rows should be done before displaying on to the Screen.
    Please suggest me ASAP.
    Thanks,
    Akila

    Hi Akila,
    please try this.
    Create a node (Eg: TEST) of type 0-n and 0-1. Take attributes attr1, attr2, flag (of type BOOLEAN). Create a table and give the TEST node as datasource. Now using "Create Binding" create columns for attr1 and atte2. Now, bind the read-only property of the columns with flag attribute.
    Now, in the INIT method, set the table values like this:
    For examle, if you want to disable row having test2,
    ls_test-attr1 = 'A'.
    ls_test-attr1 = 'TEST1'.
    ls_test-flag = ' '.
    append ls_test to lt_test.
    clear ls_test.
    ls_test-attr1 = 'B'.
    ls_test-attr1 = 'TEST2'.
    ls_test-flag = 'X'.
    append ls_test to lt_test.
    clear ls_test.
    ls_test-attr1 = 'C'.
    ls_test-attr1 = 'TEST1'.
    ls_test-flag = ' '.
    append ls_test to lt_test.
    clear ls_test.
    lo_test->bind_table( lt_test ).
    By doing this, 2nd row gets disabled.
    Also, if you already have the internal table with values, based on some condition you can change the value of flag and bind the table to node.
    Hope this helps you, Please let me know in case of any queries.
    Regards,
    Manogna

  • How to fix few rows in ALV after filtering on a column in Web Dynpro ABAP

    Hi,
    I have the following requirement:
    In an ALV, when i filter based on a column, then this filter should not be applied to 2 of its rows.
    These rows relate to totals. The totals are manually calculated as they require other component information too.
    Along with the filter result, these total rows have to be displayed.
    Let me know in case ALV in Web Dynpro ABAP supports this functionality.
    Regards,
    Rekha

    Hi,
    ALV table does not support this functionality.
    You can display the total in an another table instead.
    I had the same requirement with total and had to display the totals separately.
    Thanks,
    Feroz

  • Adding rows in web dynpro ABAP Dynamic Interactive form.

    Hi Experts,
              I am having problem in web dynpro ABAP Dynamic Interactive form.
    This is my scenario....
    I have a dynamic interactive form that has buttons to add and remove rows in a table. It works fine when I preview it , but when I render, view or save it using ADS, it no longer works. The "add" button actually does instantiate more repeating rows, because I put some trace messages in to count them, but the added rows are not displayed. How do I make them visible?
    In web dynpro java we write some coding in modify view to set the pdf form as dynamic
    IWDInteractiveForm iForm =
    (IWDInteractiveForm)view.getElement("<ID>");
    iForm.setDynamicPDF(true);
    simillarly what we need to write in web dynpro ABAP.
    Please give me solution for the same.
    Thanks,
    Sathish

    hi all,
             expecting reply from u all. pls help me and give some sugesstion.
    regards,
    vinoth.

  • Reading Dynamic Table Values in interactive form (web Dynpro ABAP)

    Hi All,
    I have created a Web Dynpro ABAP application which contains an Interactive Form, That Adobe Interactive Form contains Dynamic table (New rows can be added manually and deleted using a button).
    I am not able to read the Dynamic table values in Web Dynpro u201COn Submitu201D.
    In the Adobe form I have web Dynpro native button (I am using ZCI), while clicking the native button I need to read the dynamic table values.
    How can I resolve this problem.
    Thanks and Regards,
    Boopathi M

    that means, when u add the table instance at runtime, you will also have to add an element to the node that is bound to the table.
    probably addNew() mathos may be useful to you.
    it appends a new record to the record set.
    xfa.sourceSet.dataConnectionName.addNew()
    also when on the exit event of the table field, do the following:
    var i = xfa.parent.index
    $record.rootnodename.tablenodename.data<i>.fieldname = $.rawValue
    xfa.host.messageBox($record.rootnodename.tablenodename.data<i>.fieldname)

  • How to Implement Sort, Filter funtinality in Normal web dynpro ABAP Table

    Hello,
    How to Implement Sort, Filter funtinality in Normal web dynpro ABAP Table ?
    Thanks

    hi,
    Check out this link for sorting in Table.
    Sorting option in WebDynPro ABAP UI Table
    steps to follow :
    ->Have the data in internal table (itab).
    ->Now use sort command for the particular column which ever you want to sort.
      e.g sort itab descending by <Column>.
    ->Now you can bind the internal table with the Context Node which is binded to Table.
    I hope it helps.
    Thanx.

Maybe you are looking for