Editing Certain screens on Open Enrollment

Hi all,
I have a requirement to add a note to EACH Open Enrollment page based on selection.  For example if the employee selects "Opt Employee Life" we need a note on that screen with details about our plan.  Again, if they select "Opt Spouse Life" we also need a different note on that screen for that plan.
Could anyone please tell me how this would be possible and give me a push in the right direction?

You can add a note via Web Dynpro to the VcBenefitsPlanSelection component.

Similar Messages

  • How do I restrict certain plans from appearing during Open Enrollment?

    We have 15 benefit plans for which all employees are eligible.  We do not want to change the groupings or settings for our Open Enrollment period but would like to restrict the plans that appear for Open Enrollment so that only 12 out of the 15 plans are displayed and available to employees in ESS.  Can this be done?  I know I can restrict which plans are available when using IT0378 Adjustment Reasons but cannot find a way to restrict the list for Open Enrollment.  Thanks for any suggestions.

    I had that exact same delima, but one of our consultants pointed us to the transaction: HRBEN00ADJRSN
    This is a mass load of adjustment reasons.  You just need to feed the program the total time allowed for adjustments and things like start of records date and end of records date.  Because of the dates and the potential for different plans to have different dates, we actually have two open enrollment adjustment reasons.  We have one for Flexible spending where I give the 1/1 begin date and a 12/31 end date since it is only effective for the year in question.  Then we have our main open enrollment for all other plans where the begin date is 1/1 of the new year and 12/31/9999 for the endda.  I then run the HRBEN00ADJRSN twice for the population:  once for the flex enrollment, and then again for the main open enrollment adjustment reason.
    DP

  • Restricting certain plans from ESS during open enrollment

    Hi Experts,
    We have a requirement to restrict plans from ESS during open enrollment. Please let us know the best possible solution to acheive the same.
    We have found that Proxy class CL_BENEFITS_AREAPAGE which is assigned to the service can be copied and enhacned to filter the plans, is this the right approach?

    I had that exact same delima, but one of our consultants pointed us to the transaction: HRBEN00ADJRSN
    This is a mass load of adjustment reasons.  You just need to feed the program the total time allowed for adjustments and things like start of records date and end of records date.  Because of the dates and the potential for different plans to have different dates, we actually have two open enrollment adjustment reasons.  We have one for Flexible spending where I give the 1/1 begin date and a 12/31 end date since it is only effective for the year in question.  Then we have our main open enrollment for all other plans where the begin date is 1/1 of the new year and 12/31/9999 for the endda.  I then run the HRBEN00ADJRSN twice for the population:  once for the flex enrollment, and then again for the main open enrollment adjustment reason.
    DP

  • ESS - Benefits - Open enrollment  (Concurrent employment is enabled)

    We are trying to set up ESS open enrollment. After adding/editing/changing plans --> review enrollment --> Save.
    On saving, getting an error "rfc_error_system_failure" on the ESS screen.
    Checked with ST22 for the error details. The name of runtime error is "uncaught exception" and the exception is "CX_HRPA_VIOLATED_PRECONDITION". 
    Based on a  Similar thread on the forums --> Link : [Re: CX_HRPA_VIOLATED_PRECONDITION using HR_INFOTYPE_OPERATION to insert rec; and Sap note #  493984  , the error seems to be related with concurrent empoyment.
    Analysis:
    1. If CE is disabled, there is no error - open enrollment works fine both in R/3 (HRBEN0001) and via ESS
    2. If CE is enabled," open enrollment" in R/3 using HRBEN0001 - there is no error.
    3. Error occurs only when "open enrollment" is accessed through ESS, when CE is enabled.
    Would like to know if some one can share their experience on using ESS open enrollment when CE is switched on?
    Version details: ECC 6.0 (support pack level 22 for SAP-HR and EA-HR), EP 7.0 , ESS BP 1.0
    Thanks,
    Javed.

    Problem solved after deploying note # 1020389

  • T-code HRBEN0005 calling different form for open enrollment

    Hi,
    I have to create two different forms for different adjustment reasons for open enrollment(t-code HRBEN0005).
    But in the config table T74HL we can call only one form so I am looking for an enhancement where i can  pass the form name according to the adjustment reason.
    I am not able to find any such enhancement, please let me know if anyone has done this scenario.
    Regards,
    Manu

    Hi,
    As I understand, you have a custom edit form, you would like to click a button and jump to another edit form. Correct me if there is any misunderstanding.
    If that is the case, you could create different view for a list edit form. Then use a button to switch among views to show different view. For more information:
    http://office.microsoft.com/en-in/infopath-help/add-delete-and-switch-views-pages-in-a-form-HA101732801.aspx
    Regards,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected] .
    Rebecca Tu
    TechNet Community Support

  • How to change the dates for open enrollment

    Hi Experts,
    I am implementing ESS BP 1.0 on EP 7.0 SP11 ERP2005. In the benefits and payment workset, there is open enrollment process which is allowed between certain dates. How to change those dates in the backend system?
    Thanks!

    The open enrollment period dates can be changes under Benefits>Flexible administration>Define administrative parameters.
    Thanks

  • IMG Configuration for Open Enrollment

    Hi ,
    I have a requirement wherein I have to do the IMG Configuration for Open Enrollment to bring a hyperlink for the same in SAP Enterprise Portal. As I am very new to ESS/MSS, I would require your help to achive the above functionality up and running in the portal and learn in the process.
    Thanks in advance!!
    Regards
    Smita

    General Link Views is configured using tcode 'HRBEN0041' (benefit URL). Those URL that have 'Internet Service is generally available' (double click on the entry to go to detail screen) will show up in 'General Link Views'.
    PlansOfTodayViews is not configured, but data is read from ee's master data using SAP function 'hr_ben_ess_rfc_plans_of_today'
    refer here
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0e3a488-cdc2-2b10-209b-e01a0ed934b4?quicklink=index&overridelayout=true
    EMPLOYEE_BENEFITPAY_OPEN_ENROLLMENT05
    read note 968360 and write a proxy class.,
    The links that you see in area/home page for benefits application is
    delivered using the proxy class CL_BENEFITS_AREAPAGE
    Open enrollment link in active in on SAP ESS home page

  • Using Photoshop as edit application fails to open image

    I have Photoshop CS selected as my edit application. PS opens to a browse screen and the selected image in iPhoto fails to appear for edit. With the new lib structure I cannot search for the individual image. I can export the mage and edit but then I am forced to import the edited file.
    Ideas? Thanks.

    John
    You can set Photoshop as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop, and when you save it it's sent back to iPhoto automatically.
    IF you edit it the way you want to, iphoto will not reflect the changes to the file as it won't know about them.
    Regards
    TD

  • Photoshop Elements 13...downloaded software...when I click on the icon the program opens to a choice of organizing or editing photos.  Editing photos will not open...the bar above just spins.  Why is that?

    Photoshop Elements 13...down loaded software...when I click on the icon the program opens to a choice of organizing or editing photos.  Editing photos will not open...the bar above just spins.  Why is that?

    Hello flarogue7
    This issue means there is certain issue with your HOSTS file.
    Just navigate to C:\Windows\System32\drivers\etc on your computer, rename the HOSTS file and try to install. It will install.

  • ESS Open Enrollment statement link

    Hello ,
    I am on NW04s and ECC6.0 and added a link on the confirmation screen for the Open Enrollment service for the Open Enrollment confirmation statement but when I click on the link I get the following error:
    com.sap.pcuigp.xssfpm.java.FPMRuntimeException: No correct adjustment reason specified
         at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
         at com.sap.xss.hr.ben.enrollmentreasons.VcBenefitsEnrollmentReasons.isConsistent(VcBenefitsEnrollmentReasons.java:218)
         at com.sap.xss.hr.ben.enrollmentreasons.wdp.InternalVcBenefitsEnrollmentReasons.isConsistent(InternalVcBenefitsEnrollmentReasons.java:190)
         at com.sap.xss.hr.ben.enrollmentreasons.VcBenefitsEnrollmentReasonsInterface.isConsistent(VcBenefitsEnrollmentReasonsInterface.java:173)
         at com.sap.xss.hr.ben.enrollmentreasons.wdp.InternalVcBenefitsEnrollmentReasonsInterface.isConsistent(InternalVcBenefitsEnrollmentReasonsInterface.java:152)
         at com.sap.xss.hr.ben.enrollmentreasons.wdp.InternalVcBenefitsEnrollmentReasonsInterface$External.isConsistent(InternalVcBenefitsEnrollmentReasonsInterface.java:228)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:507)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:437)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:195)
         at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:429)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:700)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:269)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:728)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:663)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:154)
         at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:78)
         at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
         at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:220)
         at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1248)
         at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:353)
         at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:551)
         at com.sap.portal.pb.PageBuilder.wdDoInit(PageBuilder.java:190)
         at com.sap.portal.pb.wdp.InternalPageBuilder.wdDoInit(InternalPageBuilder.java:150)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
    I wonder for the cause for this.
    Any help would be highly appreciated.

    can you please check 1068276.
    also please send the dump of R/3 using st22 transaction.

  • ESS Open enrollment - Hide Plans

    Hi Gurus,
    We are implementing Open enrollment for ESS. The problem is when we run the Enrollment iView, it is pulling all the benefit plans, despite us having the Adjustment reason "OPEN". Even when I disable the adjustment reason, it is pulling all the plans with out any error. So, I believe the iView is not looking at the Adjustment reason at all.
    I have set the URL parameter in the resource "Z_EMPLOYEE_OPENENROLLMENT_SERVICE05" as "TRACKING_ID=OPEN&INITIATOR_ROLE=HRASRD&EVENT=OPEN". Also I have tried setting the Application Parameter in the Enrollment iView as "EVENT=OPEN". Are there some other parameter that needs to be set?
    Thanks,
    Sudhir

    Also, What is the difference between the Open Enrollment Service, FlexBens Enrollment, and Generic Enrollment?
    I am using the service Z_EMPLOYEE_BENEFITPAY_OPEN_ENROLLMENT05. Am I using the wrong service?
    thanks,
    Sudhir
    Edited by: Sudhir Avirneni on Aug 18, 2008 6:50 PM

  • ESS Open Enrollment Service

    Hello,
    I am on EP7.0 NW04s ECC6.0 and want to modify the ESS Service Open Enrollment ...and I am looking for the ESS Webdynpro Application service corresponding to it.
    Any help would be highly appreciated.

    Hi Antony,
    Thanks for replying.
    I have verified in SM30. I do not see any value in the input field for "URL of PCD". are there any other check points?
    Following are the details of the for the resources, service keys and service groups.
    Resource Key: EMPLOYEE_GENERICENROLLMENT_SERVICE05. 
    Directory Path: sap.com/ess~ben
    Object Name: BenefitsApplication
    URL Parameter: TRACKING_ID=GENERIC&INITIATOR_ROLE=HRASRD&EVENT=
    <b>Assignments</b>
    Servive Key: EMPLOYEE_BENEFITPAY_GENERIC_ENROLLMENT05.
    Service Group: EMPLOYEE_BENEFITPAY_GENERIC_ENROLLMENT
    Resource Key: EMPLOYEE_GENERICENROLLMENT_SERVICE
    Directory Path: sap.com/ess~ben
    Object Name: BenefitsApplication
    URL Parameter: EVENT=
    <b>Assignments</b>
    Service Key: EMPLOYEE_BENEFITPAY_GENERIC_ENROLLMENT
    Service Group: EMPLOYEE_BENEFITPAY_GENERIC_ENROLLMENT
    I also have another issue came up during trials.
    I copied sub Areas, services, service group, resources, and assigned them accordingly to areas and group pages. and made changes respectively in the PCD location (application parameters:   sap.xss.menuargrp etc..).
    I removed the Sub Area from the Area Page. Still I am seeing some links like "Open Enrollement", "Adjustment Reason Enrollments" etc. which just refer the above Resource Keys. Where are the default values coming from? Like mentioned in one of the threads, are they coming from Client "000".
    Thanks!
    Message was edited by:
            minisap g
    Message was edited by:
            minisap g

  • Boris 3D text editing window won't open without deleting FCP preferences

    So, in my FCP7 projects, the Boris 3D text editing window won't open without deleting FCP preferences first. I've tried new projects, old projects, open all new windows on top settings. Once I delete the preferences, viola, opens right up. I can rebuild my preferences and after just a few days it won't open again... without preference delete.
    I'm on a Macbook Pro 17'" i7 and do most of my editing on a 27" Apple Cinema Display. This is the only reason I could come up with. However I did some editing from the Macbook's screen and after 1 day, the Boris 3D editing window again refused to open. I have no idea. Is this is a known bug, etc.?
    Help!

    With Final Cut not running, trash the Boris Title 3D preference file.
    /Library/Preferences/Title 3D Preferences
    Also, you could have a corrupt or duplicate font file. Open FontBook and check it out.

  • Open Enrollment - No entry for form type B2

    Hello,
    I havea problem in open enrollment, when we save after the review, error -No entry for form type B2 is occured.
    I haveperformed all the necassary steps as below.
    1) Created new package and copy HR_BEN_ENRO and HR_BEN_CONF from 000 to current client as Z forms
    2) Activated the form.
    3) Assigned the above modified the templates in SPRO.
    I even see the new entries in table T74Hl
    Let me know what is wrong
    John

    Nice work, Tim. I hit that problem before long ago, but did not get change to reply....heck, I would have to dig through my notes to even find the fix again! haha Thanks for posting it up and helping out.
    edit: hahaha Found an old post I did in the HR forum for this a good while back. =)
    What is Form type B2

  • FlexBens:Open Enrollment/Print form- No correct adjustment reason specified

    Hi Experts,
    Need help on Flexible benefits of UK.
    I have done all the necessary configuration, but somehow im facing the "No correct adjustment reason specified" on the ESS pages of FlexBens:Open Enrollment & FlexBens:Print Form Screen. However, im able to view Participation screen.
    Also, i have maintained 171 and 378 aswell. but still this error comes. I have used Tcode HRFBN0001 for enroll ment from R/3. Its working fine here. Also I looked in functional module HR_BEN_ESS_RFC_ENRO_REASONS. Data is shown properly.
    I doubt if this is an authorization issue. If anyone of you know what should be the portal Role to access Flexible Benefits ok UK. or if you think the reason is something else, the please share with me your thoughts.
    Regards,
    Pranitha

    Hello Bhargava,
    Please assign/ Configure General Benefits Information (Infotype 0171) for PERNER.
    Go thru this link it will help you
    [http://help.sap.com/erp2005_ehp_03/helpdata/EN/7e/8a62e6545711d1891c0000e8322f96/content.htm]
    Thankyou,
    Regards
    Vijai

Maybe you are looking for