Editing error message from server
Hai all,
i want to know whether it is possible to change the style of the error message. style means Font, Size, Color of the text that are validated in server and sent to browser using
FacesMessage message=new FacesMessage(......);
With h:messages you cannot set individual message style classes. If you need that much control, you probably should be using h:message anyways.
What you can do with h:messages, is set a different style class for different error severities. Use the errorClass, fatalClass, warnClass, and infoClass attributes.
So say you were to throw a validation error in one of your custom validation classes. You could set the message severity to something reasonable, and use the appropriate attribute on h:messages to change the style class for it.
CowKing
Similar Messages
-
'Cannot obtain error message from server' when trying to use ODBC
Post Author: Grant C
CA Forum: Data Connectivity and SQL
Hi, I'm developing some reports using Crystal XI on my local PC, using an Oracle 10i back end on a separate server. The SQL for the report is in a method in an oracle package.
When I set the datasource location, selecting 'Oracle Server' then entering the details works fine, and the report runs. However, when I try to use an ODBC connection I get the following error:
Database Connection Error: 'Cannot obtain error message from server.'
The ODBC link is set up as a System DSN, which works fine when I test it. I think I need to use ODBC as some of the reports (which I inherited) seem to fail when run on the Crystal Server, and it seeme to be the ones set up with ODBC which work.
Any thoughts? Thanks.Hi Mars-
It sounds like your NI-DAQ installation may have become corrupted. I would suggest uninstalling and reinstalling the DAQmx 7.4 driver to correct this problem and ensure that you're up to date. This download is available here: NI-DAQ 7.4
If the problem persists you may want to uninstall and reinstall LabVIEW and then NI-DAQ in that order. The error message will usually give an indication as to which VI the error occurred in. Please let us know which VI is failing if you're unable to avoid the error with these suggestions.
Have a good day-
Tom W
National Instruments -
How can i dispaly an Error Message from Server Side To form
Hi All,
How can i dispaly an Error Message from Server Side To form side .
i try several ways nothing succed.
i put the error in stack and after call the procedure from form i added
Qms$Trans_Errors.Display_Messages;
and because it is an error not informantional error the error screen displayed and enter
in infinite loop acts like flashing .
can any one help me please i use C/S Headstart6i and Designer 6i
thanks alot
radihi,
thanks alot lauri.
yr code work only using information message but in error message its still the same .
the error window still flash and enter in infinite loop of executeing the same triggers.
thanks again
radi -
Database Connector error: 'cannot obtain error message from server'
I am using Oracle stored procedures and I have used IN parameters for input and INOUT parameter of REF_CURSOR TYPE for returning resultset in Crystal Report 2008 by using package. Now when I am trying to add the package in the Crystal Report, parameter input box prompts, I enter some values and gets Database Connector error: 'cannot obtain error message from server'.
But when I do not use INPUT parameters and use OUT parameter of REF_CURSOR type it runs well without any issues.
We are using ODBC connection for Oracle.
Kindly suggest.Hello,
Search the Knowledge Base for "oracle store procedures" and you'll find a document on how to write a SP so CR can use them.
Thank you
Don -
Not supported. Details: Cannot obtain error message from Server
Post Author: Florian
CA Forum: Data Connectivity and SQL
Hi,I'm using CR9 and try to use an Oracle stored procedure as a datasource for a report. But everytime I want to add the procedure to the report with the help of the database expert I get this error.I already searched for a solution, installed SP4 that should solve the problem --> nothing changed.Strange thing: when I connect directly to the Oracle Server (instead of ODBC), everything runs fine. Any suggestion? Best Regards,FlorianPost Author: synapsevampire
CA Forum: Data Connectivity and SQL
You need smarter management.
If a software supplier suggests a patch, and the patch corrects something, then you need to apply it.
Implementing a test server is optimal of course. If they do NOT have one, then they must have a disaster recovey plan in place, if it breaks something else, implement it.
They sound like poorly thought out, fear mongering IT people that should be replaced.
I would write up an analysis that states that management will not implement the suggested solution.
In either case, I would get your resume in circulation
-k -
Error message from Application Server
Hi All,
Is it possible to capture a descriptive error message from the Application server when we try to transfer a file from SAP and it does not get written to the application server.
I know it is possible to catch the standard catchable runtime exceptions, but I also would like to know if the file transfer fails in any other conditions which do not result in runtime dumps, nevertheless I should be able to get the error message.
Thanks in advance,hi,
it is not possible to find the run time errors in application server while writing the file.using sy-subrc only we can find out. where it is writing correctly like this.
we can see all the application server files in this Tcode: AL11 -
Why do I keep getting an error message from Digital Editions saying that it has encountered a problem and needs to close. I need this programme to download a text book from Proquest for University work what gives????
You are using ADE on Windows or Mac ? and their versions ??
Please restart your machine and try once again.
Thanks -
Unity Connection 10.5.1: I upgraded the Unity Connection Server from V 9.1. After that, cannot logn to ELM an error message " The server encountered an internal error that prevented it from fulfilling this request." appears. The error further displays "
type: Exception report
message:
description: The server encountered an internal error that prevented it from fulfilling this request.
exception:
ServletException Could not initialize class com.cisco.vos.platform.api.config.UpgradeStatus
root cause:
NoClassDefFoundError Could not initialize class com.cisco.vos.platform.api.config.UpgradeStatus
note: The full stack trace of the root cause is available in the logs.
Has anyone experience this issue? Any solutions? Your assistance is greatly appreciated!Hi Mesut,
you can refer the link for migration
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/10x/upgrade/guide/10xcucrugx/10xcucrug010.html
regds,
aman -
Database Connection Error: Cannot obtain error message from the server
I have a SQL statement that wants to add a temp table to the database. The SQL statement works fine but when I try to add it via 'Add Command' feature in Crystal XI R2, I get the following error message:
Database Connection Error: Cannot obtain error message from the server
Any ideas?
Thanks in advance,
Zack H.Hi Raghavendra,
I am using this in the 'Add Command' feature but I get the error message displayed in the subject line:
CREATE TABLE #TibetanYaks(
YakID char(4),
YakName char(20) )
INSERT INTO #TibetanYaks (YakID, YakName)
SELECT LastName, FirstName
FROM Employee
WHERE EmployeeID between '2000' and '3000'
I haven't tried to add this as a stored procedure but I imagine it will work as I have no problems yet with stored procedures. I simply want to be able to use temporary tables for the sole purpose of that session and not creating anything static in the database.
By the way, even though I get the error message, when I look on the backend database, I see that the temporary table was successfully created...its just not brought across correctly in Crystal.
Any ideas?
Zack H. -
I am receiving an error message from another software (Epub Ultimate) stating: "Authorize Adobe Digital Editions to Generate an AdeptKey". How do I do this?
See here:
How do I remove older versions of Photoshop? -
Trying to register Kobo with Digital Editions Error Message
Every time I go to register my Kobo device I get the error message Activation server Error. code: E_AUTH_NOT_READY
Its driving me nuts as I want to read books on my Kobo and not just on the laptop. Please help, it really shouldn't be this difficult!
Thanks AliDisconnect your device from the USB port
Now restart Adobe Digital Edition and using CTRL-SHIFT-D to deauthorize the computer and select Erase Authorization.
Now go back to Adobe Digital Edition, Help and Authorize Computer
Now reconnect the device to the USB port
Now select your device in the Adobe Digial Edition and Authorize the device
Now get a library book in the Adobe Digital Edition and then add it to the Device
Hopefully things will work fine.
I hope it helps. -
Error message from the source system, Caller 09 contains an error message.
Hi,
Guru's, i got an error massage when my process chain is running(Daily) in BIW 7.0, the error got in Data Loading from source to PSA or data targets. The errors having the below details
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request. "
Can any body help me out of this situation what to do and how to resolv ethe problem.
Thanks and Regards,.
Taps....Caller 09 is a very common issue - please search the forums before posting....
Arun -
Error message from source system
Hi All,
We have an infocube and ods which is being loaded from another ods. This is included in a process chain.
In the process chain the Infopackage execution step has failed. When I right click and go for display messages, I found the following message in Messages tab:
Error message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the
And in Indiv Messages tab,
Delta upload is only possible after successful initialization.
Errors in source system.
I tried to update the data targets from the initial ODS manualy but in vain.
Any Help is awarded with points.
Thanks
APHi,
Goto Info pack -> on menu bar select scheduler -> select init options for source system -> one request with green status -> select it and click on delete symbol , it will delete the init. you can cross verify this in the base ODS where you dint find data mart status(after refresh). now select init delta process under that select init without data transfer and schedule the load it will update one record and init flag to your source ODS.
Note: if the last request is not updated from soruce ods to targets for that also you will find data mart status for this select the particular data mart -> click on delete symbol it will delete for the particular request (if it is updated to target it will not allow you to delete) then do delta load it will update the request which is not loaded from source ods to next targets.
Regards
Sankar -
Hi,
I have designed a Custom screen for one of my requirements. However when the screen is displayed, I am facing an error message from SAP Front End Server that says " Erroneous data received from server. Application may not work correctly".
What could be the reason ?
Thanks & Regards,
Venkatesh.Hi,
Please check the belos SAP notes
1453114 Maximum string length
1161022 Dialog box "Erroneous data received from server"
1524462 - Erroneous Data received from server. Application may not work correctly.
Regards,
Naveen. -
Error Message from VM TMS 13.0
Dear all,
We have receive some error message from the VM TMS 13.0, that is installed a month ago.
<ErrorCode 1000>
Message="Faulting application name: TMSSNMPService.exe, version: 1.0.4008.29206, time stamp: 0x4d12159c Faulting module name: mscorlib.ni.dll, version: 4.0.30319.18444, time stamp: 0x52717d7e Exception code: 0xc0000005 Fault offset: 0x0000000000cd5bf7 Faulting process id: 0x116c Faulting application start time: 0x01cf68076319516f Faulting application path: C:\\Program Files (x86)\\TANDBERG\\TMS\\Services\\TMSSNMPService.exeFaulting module path: C:\\Windows\\assembly\\NativeImages_v4.0.30319_64\\mscorlib\\abf62e6545d2802fc60286678a67e6bf\\mscorlib.ni.dll Report Id: 371654ff-d3fb-11e3-98ea-005056b1027a"
<ErrorCode 1026>
Message="Application: TMSSNMPService.exe Framework Version: v4.0.30319 Description: The process was terminated due to an unhandled exception. Exception Info: System.AccessViolationException Stack: at System.Runtime.InteropServices.Marshal.ReadInt64(IntPtr, Int32) at Tandberg.CommLib.SnmpLib.TrapHandling.SnmpTrapHandler.VbToObject(Tandberg.CommLib.SnmpLib.WinSnmp.SMIVALUE ByRef) at Tandberg.CommLib.SnmpLib.TrapHandling.SnmpTrapHandler.VblToHashtable(IntPtr) at Tandberg.CommLib.SnmpLib.TrapHandling.SnmpTrapHandler.OnSnmpMessage(IntPtr, IntPtr, Int32, UInt32, UInt32, IntPtr)"
<ErrorCode 7031>
Message="The TMSSnmpService service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 60000 milliseconds:
Any comments on the above error?
Best Regards,
Ben LaiThis seems to be happening on 14.2.2 as well.
Component: Application Error
Severity: Warning
Event class: /App/Failed
Device class: /Server/Windows/WMI/TMS
Systems: None
Summary: Faulting application name: wmiprvse.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc794
Faulting module name: ole32.dll, version: 6.1.7600.16624, time stamp: 0x4c2984e3
Exception code: 0xc0000005
Fault offset: 0x00000000000393a9
Faulting process id:
Message:
Faulting application name: wmiprvse.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc794
Faulting module name: ole32.dll, version: 6.1.7600.16624, time stamp: 0x4c2984e3
Exception code: 0xc0000005
Fault offset: 0x00000000000393a9
Faulting process id: 0x39c4
Faulting application start time: 0x01d04d36eb9b6c36
Faulting application path: C:\Windows\system32\wbem\wmiprvse.exe
Faulting module path: C:\Windows\system32\ole32.dll
Report Id: e334bd6f-b990-11e4-aa1d-842b2b6be310
http://tools.cisco.com/security/center/viewAlert.x?alertId=29142
Maybe you are looking for
-
Problem with Oracle ODBC Driver on Windows 7
Hi, Please help with this problem I have with a Windows 7 machine. I have installed Oracle Client 11g on my Windows 7 machine but when I want to create an ODBC Data Source, I cant find any driver for oracle. How can I resolve this issue? I need the d
-
Welcome to the SQL Server Disaster Recovery and Availability Forum
(Edited 8/14/2009 to correct links - Paul) Hello everyone and welcome to the SQL Server Disaster Recovery and Availability forum. The goal of this Forum is to offer a gathering place for SQL Server users to discuss: Using backup and restore Using DBC
-
Cannot Create a pdf from Word Doc 2003 in Acrobat 8
My first time out trying to create a pdf from word hasn't worked. I've tried several times, but either get some message that distiller cannot run when Acrobat is not active. Well, as far as I can tell it's staring me in the face. If I try to print fr
-
Restoring backup to an 8.0 device from an 8.0.2 device
Just a quick tip, in case anyone is in the same position as I was: I had an iPhone 6, which I had updated to 8.0.2. I dropped it and broke the screen. (If you read that these devices break more easily than the 5, believe it! I dropped it from 3 feet
-
No broadband connection since upgrade to 20mb
Since being upgraded to 20mb broadband I cannot get on the Internet. My line tests ok, all the lights on my hub are green, and I have had an engineer visit and we did a connectivity test, the result showed all ticked except the DNS authorisation. Th