Editing multiple pages
The question is - am I able to edit a navigation menu just on the main page of my site, so its content would be updated on all the other pages automatically? What is needed to do so? The site is built using just HTML and CSS.
Hello Vecherov,
To do this you would need to create something like a Spry HTML dataset that was dynamically pulled into each page. Your question has come up in the forums in the past. Take a look at the following forum thread: http://forums.adobe.com/message/1012738#1012738
There is also a tutorial on working with Dreamweaver, Spry and InContext Editing here: http://www.adobe.com/devnet/dreamweaver/articles/spry_dynamic_dw_site.html
Best regards,
Corey
Similar Messages
-
Multiple pages that edit a single row
I have searched on tabs and editing a single row using multiple pages and I am confused. I don't want to use java as I am trying to not learn that too...
What I am trying to do sounds like it has been explained before but let me do this again...
I have a record that is too large to fit on a single screen. This makes for a cumbersome entry process. The record is actually broken into four "logical" chunks. Main, Sub1, Sub2 and Sub3.
I have made a list that will allow the record to be selected and call the first logical page... L1.
I have made tabs that show all the pages and allow me to navigate between them quickly.
When I get to L1 all the data is there. I may not change any data on that page and go directly to L2 through L4. However the record is not brought forward onto those pages. So the pages are not related (and I don't have the terminology right I know :) and I could "link" the pages. So here is what I would like the application to do;
1. Display a list and allow the user to select the record to edit.
2. Upon edit go to the first page (tab).. this works
3. Allow the user to select a tab and the page displays the data for the record selected
4. Allow the user to complete the edits and save the record. Upon save the user is returned to the list in step 1.
I was thinking there are several ways to do it... but I was hoping someone could save me a bunch of trial and error (emphasis on the error) ...
1. When navigating off the page save the record, pass the key and re-read the record... ugly huh?
2. Pass all the session data for the record over to the next screen. Is that possible? e.g pxx_field1 = pyy_field1
The the question was does a template with two level tabs keep the record data between tabs?
Any help is greatly appreciated.
SamI think this works... kinda
1. I have a "list" that allows the selection of the item to edit.
2. That list opens a page that is the "header" page for a tab set.
3. Each page in the tab set uses the same "ID" to read the record and display the columns. That is how it would work if the list called each individual page.
4. I modified the "slave" tabs to have the "ID" of the "header" page.
This displays the correct data on each page. And it looks like the "apply changes" button saves the changes on the page.
Caveats inlclude (I think as I haven't done exhaustive testing"
1. "apply changes" must be done at each page where there were changes or they would be lost.
2. The first dispaly of the page is blank. Clicking on the tab a second time displays the data. This is true if it is the first time a user selects a record in a session (the "slave" tabs are blank) or if it is a subsequent record update (the "slave" tabs have the last records data.
Thoughts... is this really boring to everyone but me?
Sam -
Multiple-page Adobe pdf file and preserving editing capabilities problem
I can't click the preserve Illustrator editing capabilities when attempting to make a multipage pdf.
So when I create the multiple page pdf, and then open it in Ai CS3 any text boxes are changed to individual text lines.
Am I doing something wrong?
I am using Ai CS3 v13.0.2 on an Apple imac intel core 2 duo, with mac os X10.4.11
Many thanks,
Seani see.
i have reader 9.
shocking that i would have to pay for a simple feature.
thank you for your help! -
How to Edit or PDF Multiple Page Tiles in CS2 doc while working in CS4?
I have to resave this file as CS2, so I need to be able to edit and PDF original Page Tiles from CS2, not convert to Artboards. There is no Edit Page tiles, only View Page Tiles. When I go to save as PDF, there is no "multiple pages" option under General as stated elsewhere, and it PDF's as one huge "artboard" even though there are multiple page "tiles". Thanks in advance!
If you want to save an editable Illustrator file for CS2 then you save as .ai not as .pdf.
You can still Show Print Tiling in the View menu. Use the Print dialogue to set up the paper size, orientation, and tiling options, then click Done. -
Acrobat X Pro - I need to export a multiple page pdf into a powerpoint presentation - no editing ability needed
Then you need to upgrade to Acrobat XI Pro, which you can do from the Adobe Products Page.
-
How Do I Globally Edit Multiple Chapter Master Pages In a Book?
I'm working on a new edition of an existing book; the new edition will have a new trim size. I have 40 or so chapters, and I want to change the master page of all the chapters and part headings of the book. It's been about five years since I've done anything in FM, so I'm having a hard time figuring out how to change the page and flow size of all the chapters in the book. Is there a way to do this globally? Or, to do it to one chapter and copy/paste those master pages to all the other chapters?
Thanks!
John
www.controlgeek.netSee the recent thread (about same issue for Variables).
Editing multiple chapters at once.
Same technique, just specify only Page Layouts.
And you'll probably want chapter1.fm to be the controlling instance, rather than cover.fm -
Scanning multiple pages into one document with an automatic document feeder
when using automatic document feeder to scan in multiple pages - using the Image Capture app, this process does not work for more than 2 pages. However works perfectly in PC environment.
Using a MacBook Pro with 10.8.4 and a Lexmark Interpret 405S All In One Scanner.
Is there any other all in one device that can perform this function in a Mac environment?
Please advise.Hi @FentyFly ,
I see by your post that you would like to know how to scan multiple pages into one file. I would like to help you out today.
From the HP Scan Software, click on the link for Advanced Settings, then uncheck Create a separate file for each scanned page.
Here is a URL for how to scan and change the settings. Just select your operating system.
Scan.
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
Problem with Multiple Page convert in PDF
Hi all,
I done one invoice printing and convert in pdf report. but with smartform i get all thing and giving perfect out put.
But when i give second option for direct create a file of PDF this time only one page can convert in PDF. Means when i give multiple input like print invoice 0000910 to 0000925 so this time only invoice no. 0000925 is convert in pdf. But actually i need all invoice like 910 to 925 convert in one PDF with 25 pages.
And i done coding which is show below for this issue.
so please help me out and kindly guide me what is the mistake in my below code for make multiple page in one pdf.
FORM get_FORM1.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = w_form_name
* VARIANT = ' '
* DIRECT_CALL = ' '
IMPORTING
fm_name = w_fmodule
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
w_cparam-no_dialog = 'X'.
w_cparam-preview = space. " Suppressing the dialog box
" for print preview
w_cparam-getotf = 'X'.
* Printer name to be used is provided in the export parameter
* OUTPUT_OPTIONS
w_outoptions-tddest = 'LP01'.
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ITABz[] = itab[].
ITABz1[] = itab1[].
IT_ADDRESSz[] = it_address[].
LOOP at itab1.
delete ITABz where vbeln ne itab1-vbeln.
delete ITABz1 where vbeln ne itab1-vbeln.
delete it_addressz where KUNNR ne itab1-KUNRG.
* delete itab1 where vbeln ne itab1-vbeln.
TOTAL_QNT = ITAB1-TOTAL_QNT.
TOTAL_AMT = itab1-TOTAL_AMT.
I_FKIMG = itab1-I_FKIMG.
BILL_DATE = itab1-BILL_DATE.
IJ_1ICSTNO = itab1-IJ_1ICSTNO.
VECHICAL_NO = itab1-VECHICAL_NO.
TAX = itab1-TAX.
INV_TXT = ITAB1-INV_TXT.
inv_name = ITAB1-INV_NAME.
INVOICE = ITAB1-INVOICE.
TAX1 = itab1-TAX1.
TAX_VAL = itab1-TAX_VAL.
TAX_ADD_VAL = itab1-TAX_ADD_VAL .
Text_inv = itab1-Text_inv.
TEXT1 = itab1-TEXT1.
TEXT2 = itab1-TEXT2.
TEXT3 = itab1-TEXT3.
TEXT4 = itab1-TEXT4.
TEXT5 = itab1-TEXT5.
P_DOCNO = itab1-vbeln.
CALL FUNCTION w_fmodule
EXPORTING
WERKS = WERKS
TOTAL_QNT = TOTAL_QNT
TOTAL_AMT = TOTAL_AMT
I_FKIMG = I_FKIMG
STATE = STATE
LAND1 = LAND1
LANDX = LANDX
P_DOCNO = P_DOCNO
BILL_DATE = BILL_DATE
IJ_1ICSTNO = IJ_1ICSTNO
T_WERKS = T_WERKS
VECHICAL_NO = VECHICAL_NO
TAX = TAX
TAX1 = TAX1
TAX_VAL = TAX_VAL
TAX_ADD_VAL = TAX_ADD_VAL
inv_txt = inv_txt
inv_name = inv_name
INVOICE = INVOICE
Text_inv = Text_inv
TEXT1 = TEXT1
TEXT2 = TEXT2
TEXT3 = TEXT3
TEXT4 = TEXT4
TEXT5 = TEXT5
* ARCHIVE_INDEX =
* ARCHIVE_INDEX_TAB =
* ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS = w_cparam
* MAIL_APPL_OBJ =
* MAIL_RECIPIENT =
* MAIL_SENDER =
OUTPUT_OPTIONS = w_outoptions
* USER_SETTINGS = 'X'
IMPORTING
* DOCUMENT_OUTPUT_INFO =
job_output_info = t_otf_from_fm
* JOB_OUTPUT_OPTIONS =
TABLES
ITAB = itabz
ITAB1 = itabz1
IT_ADDRESS = it_addressz
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
iF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ITABz[] = itab[].
ITABz1[] = itab1[].
IT_ADDRESSz[] = it_address[].
ENDLOOP.
t_otf[] = t_otf_from_fm-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
MAX_LINEWIDTH = 132
* ARCHIVE_INDEX = ' '
* COPYNUMBER = 0
* ASCII_BIDI_VIS2LOG = ' '
* PDF_DELETE_OTFTAB = ' '
IMPORTING
BIN_FILESIZE = W_bin_filesize
* BIN_FILE =
TABLES
otf = T_OTF
lines = T_pdf_tab
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
ERR_BAD_OTF = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* To display File SAVE dialog window
CALL METHOD cl_gui_frontend_services=>file_save_dialog
CHANGING
filename = w_FILE_NAME
path = w_FILE_PATH
fullpath = w_FULL_PATH
* USER_ACTION =
* FILE_ENCODING =
EXCEPTIONS
CNTL_ERROR = 1
ERROR_NO_GUI = 2
NOT_SUPPORTED_BY_GUI = 3
others = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Use the FM GUI_DOWNLOAD to download the generated PDF file onto the
* presentation server
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE = W_bin_filesize
filename = w_FULL_PATH
FILETYPE = 'BIN'
tables
data_tab = T_pdf_tab
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
EndFORM . "get_FORM1
thanks
Keyur
Edited by: keyur chauhan on Aug 30, 2010 11:56 AM
Edited by: keyur chauhan on Aug 30, 2010 11:57 AM
Edited by: keyur chauhan on Aug 30, 2010 12:37 PMThank you!
Unfortunately I didn't find any work around.
Thanks,
Federico -
Blank page in report o/p and o/p notprinted when contains multiple pages
Dear Friends,
I am facing couple of issues while modifying an existing report
1. First page of the report is Blank
2. Report output is not printed when the output contains multiple pages.
Currently, along with the data, the report prints the output format in the first page and some totals in the last page.
The requirement is that we do not want these first and last pages.
For this, i made the following modifications to the report.
In the Layout Model,
*1. Under the body of Header section, we have a repeating frame which is printing the output format that comes out as report first page.*
Both Horizontal and Vertical Elasticity are set to Fixed and below is the code in the format trigger on this repeating frame.
function R_HEADER_PAGESFormatTrigger return boolean is
begin
if :p_header_pages = 0
then return(false);
else return(true);
end if; return (TRUE);
end;I modified this format trigger to always return false as shown below
begin
return false; --statement added by me
if :p_header_pages = 0
then return(false);
else return(true);
end if; return (TRUE);
end;*2. Under the Body of Trailer section, we have a main frame which prints summary information.*
Both Horizontal and Vertical Elasticity are set to Fixed and below is the contents of the Format trigger on this frame
function M_CONTROL_GRPFRFormatTrigger return boolean is
begin
if :report_term_count > 0
then return(true);
else return(false);
end if; return (TRUE);
end; I have modified this trigger to always return False as shown below
function M_CONTROL_GRPFRFormatTrigger return boolean is
begin
return false; --statement added by me
if :report_term_count > 0
then return(true);
else return(false);
end if; return (TRUE);
end;When i run the report after doing these modifications, i am facing the above mentioned problems.
Any idea on why a blank page is coming out before the actual data?
Also when the report output contains multiple pages, the output is not printed. Any idea on this?
Regards,
Sreekanth
Edited by: Sreekanth Munagala on Mar 23, 2012 1:15 AM
Edited by: Sreekanth Munagala on Mar 23, 2012 1:18 AMHi InoL,
I have tried by setting vertical elasticity to variable but the blank plage is still coming in the output.
Also, i am just wondering that blank page is not shown for the trailer page even though the Horizontal and Vertical Elasticty is set to Fixed.
Could you please let me know if you have any idea on this?
+InoL Wrote:+
+And this didn't happen before you made the changes to the format triggers?+ Sorry for not mentioning that this happens when i delete the entire fields and frames in Header section.
Setting the Vertical Elasticy of Header to False and returning false in Format trigger still prints the blank page in addition to the actual data pages.
I have also tried setting the option BLANKPAGES=NO in the concurrent program execution options but still the blank page is not suppressed.
Regards,
Sreekanth
Edited by: Sreekanth Munagala on Mar 25, 2012 8:33 PM -
How do I populate my date fields placed on Master Page for multiple pages?
I have a dynamic form with flowing fields. I inserted date fields using the Master Pages tab within Adobe LiveCycle Designer ES2, Windows 7 OS. I have only 1 Master Page. Everything on the form is working properly, except when I have multiple pages, the date fields are blank on all but the first page. One of the date fields has javascript in the exit event to calculate the second date field. I can manually edit the subsequent page(s) date fields, but I don't want the end user to have to do that. I want the date fields on the new pages to equal the date fields on the first pages. Below is my output with notes to provide a visualization of what I'm looking for.
Many thanks in advance for anyone who can help me with this issue!
CarolineHey Mandy,
Yes, both date fields are on the Master Page. The first one is set to "User entered - Required" and the second to "Calculated - User Can Override"
And that's right, I used your script to calculate the second date field. The only thing I changed was the field name, and used 6 days instead since I wanted the calendar days to only run a full week, like start on a Monday and end on Sunday.
Thx,
C -
How to scan multiple pages in one file
I would like to know how to scan multiple pages into one file. There is no add button that comes up. I have a HP Officejet 8600 and a macbook pro. Please help, this would really help me out.
Open Preview and use its "Import From Scanner" option in the File menu. This will launch the scanning interface, which has some standard and basic scanning controls. If you choose "PDF" as the file format to save as, then you will see an option to scan all images to one file. When you do this, you will scan and edit them individually, but Preview will save them to the same file when saved.
-
Can you share layers to multiple pages and have the content in the layers in different areas?
Hey there,
I'm wondering if there's a way to share a layer folder (like the footer layer) to multiple pages but still be able to move the entire folder independantly between each page. For example, maybe I have a page that's 5 inches long and another page that's 10 inches long. I want the footer to always show at the bottom but if I change a link or hotspot on one area in the footer, I want it to change on all pages. Is there a way in fireworks for this to work the way I want?
Thanks,
CalebI don't think you can copy layers – at least not in the
way you are thinking.
But you can select frames or a range of frames and then
copy/cut frames.
In the new document you can then paste frames. It has a lot
of variations depending upon how you many you copy, if there are
multiple layers, what area you select before pasting and so on. It
would take a lot to describe and I'm not sure I would describe it
properly.
Generally just give it a try and get an intuitive feel for
it. The choices are available from the Edit menu but also from a
right click.
It is also possible to slect and edit multiple frames so if
you do need to move a bunch of things on different key frames that
is also possible. -
Can you edit multiple photos at once like in Lr
I have a prodject that i'm working on and i need to edit several images at once (preferabley) so that they are the same color. They are wooden cupboards and i need all the wood looking the same colour. In light room you can edit a group of images at the same time hence the colours are the same . Is this possible in Elements ? If so how do i do this ?
The Process Multiple Files command applies settings to a folder of files. If you have a digital camera or a scanner with a document feeder, you can also import and process multiple images. (Your scanner or digital camera may need an acquire plug‑in module that supports these actions.)
When processing files, you can leave all the files open, close and save the changes to the original files, or save modified versions of the files to a new location (leaving the originals unchanged). If you are saving the processed files to a new location, you may want to create a new folder for the processed files before starting the batch.
Note: The Process Multiple Files command does not work on multiple page files.
Choose File > Process Multiple Files.
Choose the files to process from the Process Files From pop‑up menu:
Folder Processes files in a folder you specify. Click Browse to locate and select the folder.
Import Processes images from a digital camera or scanner.
Opened Files Processes all open files.
Select Include All Subfolders if you want to process files in subdirectories of the specified folder.
For Destination, click Browse and select a folder location for the processed files.
If you chose Folder as the destination, specify a file-naming convention and select file compatibility options for the processed files:
For Rename Files, select elements from the pop‑up menus or enter text into the fields to be combined into the default names for all files. The fields let you change the order and formatting of the components of the filename. You must include at least one field that is unique for every file (for example, filename, serial number, or serial letter) to prevent files from overwriting each other. Starting Serial Number specifies the starting number for any serial number fields. If you select Serial Letter from the pop-up menu, serial letter fields always start with the letter “A” for the first file.
For Compatibility, choose Windows, Mac OS, and UNIX® to make filenames compatible with the Windows, Mac OS, and UNIX operating systems.
Under Image Size, select Resize Images if you want each processed file resized to a uniform size. Then type in a width and height for the photos, and choose an option from the Resolution menu. Select Constrain Proportions to keep the width and height proportional.
To apply an automatic adjustment to the images, select an option from the Quick Fix panel.
To attach a label to the images, choose an option from the Labels menu, then customize the text, text position, font, size, opacity, and color. (To change the text color, click the color swatch and choose a new color from the Color Picker.)Note: The Watermark option enables you to add a permanent visual watermark to images. For more information, see this article.
Select Log Errors That Result From Processing Files to record each error in a file without stopping the process. If errors are logged to a file, a message appears after processing. To review the error file, open with a text editor after the Batch command has run.
Click OK to process and save the files. -
Single adf task flow portlet with multiple pages and paramter from url
Hi ,
I have made a adf task flow portlet with a parameter.
I have made a portal applcation and added multiple pages . in each of the page I am consuming that portlet through wsrp2.
I have mapped the task flow parameter in page bindings of the pages with #{param.code}. where code is the get parameter.
I have edited navigatinoal template so that when i click the pages , code parameter also get added in the url.
issue
When I run the applcation and visits first page with get parameter i get the right result. but when i click the on the other page which has some other value for the same get parameter , it doesnt display the value. But the other page shows me correct value if I go this page first but the later page doesnt display any value.
thanks1001446 wrote:
Hi ,
I have edited navigatinoal template so that when i click the pages , code parameter also get added in the url.Can you paste the code from the template here? -
How to set a template to multiple pages
Hello,
I'm using Oracle Portal 10.1.2.0.2 and I've created a hiearchy of pages and a template with regions for banner, navigation portlet and content area and I want to set up this template to multiple pages. Manually and uncomfortably, I can edit my page and in [Template] tab in [Properties] select my template. But how can I do it for example for a whole page group? Default template for page group doesn't work for me - though I've set up it in page group, in a particular page I still see [Page template]=none with no effect. Is it possible to do it through some sql query? (With specification of region, in which the page will be mapped?)
Thank you for your advice,
tbObservation:
Pages from one page group can't see templates from another page group. In case of multiple page groups I have to put my templates in [Shared objects]. Unfortunately I didn't find a way (if even exists) how to copy template from one page group to another, especially to shared objects :(
Maybe you are looking for
-
Starting new database LUW inside ABAP during IDoc posting
Hi all, During posting of an inbound IDoc, I am trying to update my Z-table in user-exit. I want to do it regardless of the result of IDoc posting. The problem is: if IDoc posted successfully - table is updated because COMMIT WORK is called at the en
-
Replacing splash text Adobe Presenter
Hellou everybody, please, where can I find and replace text Adobe Presenter on splash screen, when loading exported course from Presenter 9? Previous version of Presenter 8 it was inside wpconfig file - text ,,uiname...". But this line of uiname tex
-
Orange Account App - Your Orange
Hi all, I have installed the app through bbw and it was working fine until it started to want to update its help content, i wasnt given the choice is simply did it without interaction, now it just hangs there in my open applications list I cant do an
-
Cannot download, delete, update Itunes. Missing Bonjour.msi
Cannot download, delete or update my itunes. I'm missing bonjour.msi. There has to be a way to fix this without purchasing those fixit programs or rebooting my whole system.
-
Hyperlinks have stopped working in Mail
Today hyperlinks shown in email messages fail to open Safari. An error message is shown: no associated application can be found. Hyperlinks work ok in Safari.