Editing table properties

hello,
i have created a table. it is populated with random numbers that can be of different precision length( changed by a numeric control). i want the entire table to stay the same size but when i adjust the precision number after the decimal place the table grows larger in accordance to the widths of the numbers. this makes the table too wide. what i would like to have it do is have the widths of the columns change but leave the table the same size and just use the horzontal scrollbar to look at the other columns. can some one edit the attached vi or tell me how? thank you
Attachments:
table-11.vi ‏39 KB

A solution is to set the table width (you probably already noticed the table size property node ?) after setting the column width.
Of course you have to get read of this terrible flickering...
This is easy with the Defer Panel Update property node :
Open the Application Control sub-palette and drop a property node on the diagram, right click and select Select Class > VI server > VI, then choose the Panel property and you are nearly done.
See the picture below !..
Message Edité par chilly charly le 09-01-2006 11:39 PM
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Attachments:
Fixed Width Table.png ‏18 KB

Similar Messages

Tabular data model: Query keeps timing out when attempting to Edit Table Properties

Tabular data model (SSDT)
Problem: I have a table in tabular data model using a SQL Query for a data source. The query in question requires about 3 minutes to regenerate. When I open Edit Table Properties for this data source the query times out and I get an error (see below): "
Failed to retrieve data from udvTrainJobReportsData. Reason: Query timeout expired"
This seems to happen anytime I use a query that takes longer than a couple of minutes to regenerate. Anyone have an idea on how to get around this. Is there a timeout setting somewhere in tabular data model that can be increased?
Thanks...

Hi ManikantM,
According to your description, you query keeps time out when edit table properties. Right?
In this scenario, this error is thrown when connection or query execution exceeds the time out value. Please try to import this table and then increase the connection time out seconds.
We can increase to ExternalCommandTimeout in Analysis Server Properties. Please refer to link below:
http://aniruddhathengadi.blogspot.in/2012/07/ole-db-error-ole-db-or-odbc-error-query.html
Please also refer to a similar thread below:
https://social.technet.microsoft.com/Forums/office/en-US/3f83a26b-71c6-462e-8b90-2ce2ce0b9465/powerpivots-2010-query-keeps-timing-out-when-attempting-to-edit-table-properties?forum=excel
Best Regards,
Simon Hou
TechNet Community Support

PowerPivots 2010: Query keeps timing out when attempting to Edit Table Properties

Excel PowerPivots Version: PowerPivots for Excel 2010
Problem: I have a table in PowerPivot windows using a SQL Query for a data source. The query in question requires about 3 minutes to regenerate. When I open Edit Table Properties for this data source the query times out
and I get an error (see below): "
Failed to retrieve data from udvTrainJobReportsData. Reason: Query timeout expired"
This seems to happen anytime I use a query that takes longer than a couple of minutes to regenerate. Anyone have an idea on how to get around this. Is there a timeout setting somewhere in PowerPivots that can be increased?
Regards,
....bob
Screen Shot of Error:
Bob Sutor

Hi,
We could add the seconds in the timeout values.
Then, if you want to add the timeout values for the SQL Query, please following the link to do:
http://aniruddhathengadi.blogspot.in/2012/07/ole-db-error-ole-db-or-odbc-error-query.html
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
And here is a similar issue.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/59dbdd8e-9981-41c5-a02c-9365c46956e1/how-to-extend-the-timeout-for-long-running-queries?forum=sqlkjpowerpivotforexcel
Thanks,
George Zhao
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click "[email protected]"

Not able to figure out the table index for Edit table User Properties Dialo

Studio Edition Version 11.1.1.0.0
Build JDEVADF_MAIN.D5PRIME_GENERIC_080403.0915.4920
I'm trying to automate the various features in Jdeveloper dialogs. At one point I got struck with table in Edit Table Dialog.
Right Click on New -> Database Tier-> Select APPS: Import to offline database Objects. Step 1- Step5 dialogs comes up. Click on Next till finish button comes up. After that one table along with xdf file will be shown in the Jdeveloper Tree Menu. Right click on Table, Go to Properties. Then Select User Properties in the Left Pane. On Right Side table will be shown. I want to know what is the index for this table and also I need to input certain text and select some drop downs from this table.
Automation Tool: JFCUnit
Could you please tell how can I put values in some of the fields and select the values from the drop downs.
Kindly let me know if you need any more Information for the same.

Hi,
if you are from Oracle, please use an internal forum. If not, the JDeveloper 11 forum is at: JDeveloper and OC4J 11g Technology Preview
Frank

Table Type Stored Procedure in OBIEE Physical table properties

Hi,
Any one has ever used the Stored Procedure in OBIEE Physical table properties??
I've a procedure & a table i want to plopulate the tabel using the Procedure from OBIEE physical layer.

It would be nice if we know more details about 'Populating table'...
Using connection pool->connection pool scripts tab you may go for inserting/updating (Populating table) records into table.
It would be nice if you use dedicated connection pool for init blocks...
Ex: I want to insert user login time some xyz table my query would be like
insert into xyz values ('valueof(NQ_SESSION.USER)',sysdate)
without knowing your requirements its hard to tell anything apart from what is said.
If helps pls mark
Edited by: Srini VEERAVALLI on Jan 16, 2013 10:37 PM

ADF Master Form / Detail editable table : how to update the table ?

Hello,
I'm using ADF faces with entity objects.
Here is a simple explanation of the model :
Table DOCUMENT --> Table LINEA DOCUMENT can have 0 or several row in the LINE table. Model is quite simple.
I'd like to create JSF pages to create and update DOCUMENT/LINE items.
I began with the Edit one :
In my DataControls I have something like :
AllDocuments
|
+- Id
|
+- Name
|
+-> AllDocumentLines
      |
      +- IdLine
      |
      +- ValueI created a form with the "AllDocuments" items having navigation and submit button.
I created an editable table with "AllDocumentLines" items.
The values are correctly filled.
My questions are :
- Which kind of "button" I have to add at the end of each row of the table to :
* validate the update if "Value" changes ? I tried to drag/drop the related Create button but it stays disabled.
* delete the row
- Which button can I put to "Add" a new row ?
I searched the forum but can't find answers of my problem.
Edit: I'm using JDeveloper 11.1.1.3.0
Edited by: Christophe on Jul 2, 2010 5:12 PM

For creating a record drag the createInsert operation and for delete drag the delete operation - just make sure to drag the operation from the right VO in the data control palette.
The you can drag the commit and rollback operations from the AM level - and you can change the "Disabled" properties of the buttons to false.

30EA3 - Edit Table/Create Table(Advanced) - Table Name, Text Box Size

I am not sure if its the same on non-Linux versions, but in the edit table dialog, the table name text box size is tiny. Its only wide enough that you can see approx 7 chars.
Is it possible to increase this? The size of the text box in the simple create table dialog seems like a good size. As far as I can tell, it is not tiny to conserve space for other items.
Anyway, it's just a minor issue that wont prevent me from doing work - just think it'd be better a bit bigger. I am sure it didn't used to be this small.
Ta,
Trent

oh interesting.
are you using openJDK?
$ /usr/lib/jvm/java-6-sun-1.6.0.22/bin/java -version
java version "1.6.0_22"
Java(TM) SE Runtime Environment (build 1.6.0_22-b04)
Java HotSpot(TM) 64-Bit Server VM (build 17.1-b03, mixed mode)
Ta,
Trent

Cannot edit folder properties more than once???

If I edit a folder property so that the links opens in the same folder area, it gives me the following error if I try to edit the properties again.
An Unhandled Exception has occurred. ORA-06502: PL/SQL: numeric or value error: character to number conversion error
And for the same folder I get the following error if I click to preview it while editing.
Error: Call to utl_http failed (WWS-32136)
ORA-1: User-Defined Exception (WWC-36000)
If anyone has a workaround for these errors, it will be appreciated.
-Viral

Hi ell_ell_tee,
I just checked it works fine for me. I used this page actually. Have you checked to see if it is just the particular website that you were looking at? It could be an isolated incident.
You could also try starting Firefox in [[Safe Mode]]. If you don't have the issue while all of your add-ons, extensions, and themes are disabled, you can try adding them back in one by one until you find the culprit. You should look at the [https://support.mozilla.org/en-US/kb/Troubleshooting-extensions-themes Extensions and Themes troubleshooting guide ] and the [[Troubleshooting plugins]] article as well.
Hopefully this helps!

How to edit hyperlink properties in Acrobat Pro 9?

I'm trying to edit a PDF document (generated from Windows Word) on my Mac with Acrobat Pro 9.
What I want to do is make the borders invisible, because in Mac Preview the hyperlinks appear with ugly boxes around them. Apparently when no borderWidth property is set, Acrobat Reader defaults to a value of 0, but Preview defaults to a value of 1.
I selected Tools > Advanced Editing > Link tool and can see all the hyperlink boxes.
But I can't find a way to edit their properties.
I tried double-clicking on the rectangles, which is what it says to do in the manual, but nothing happens.
I tried control-click on a rectangle and a dialog pops up. I select properties from the dialog, but no properties appear.
Anybody know how to get this to work?
Thanks,
doug

Wow GQDiaz,
What a wonderful gift you have given us! You have saved me hours of shuffling pages one by one between large cumbersome document scans.
Your script works like a dream. Thank you for this gift.
With kind regards,
jaxios

How to edit the properties.

I installed a tool in LiveCycle called "LiveCycle Workbench". I dont know how to edit the properties of Reader Extensions server and deselect [CommentsOnline] through Workbench. Please kindly advice me in detail with examples or samples.
Thanks,
Prabudass

This is the Help topic for the Apply Usage Rights operation that the Reader Extensions service provides:
http://livedocs.adobe.com/livecycle/es/wb_help/00000949.html
If you are new to LiveCycle, you should work through this tutorial to learn the basics:
http://livedocs.adobe.com/livecycle/es/wb_help/00000405.html
Scott

How to edit breadcrumb properties like " " symbol in JDeveloper.

Hi, the problem is that I can not edit certain properties breadcrumb, like spaces or ">" symbol. I have change the css style to my own style. When I use oracle style it's work.
For example.
1) Html generated with oracle style.
P1 > P2
2) Html generated with my own css.
P1P2
As can you see, the line "  >  " have dissapear. Are there some template or file to define this line?, what I need to do to place this line?.
I 'm lost.
Thank you.
ADF Business Components     10.1.3.41.57
BPEL Designer     10.1.3.3.0 (Build 070615.0525)
CVS Version     Internal to Oracle JDeveloper (client-only)
Java(TM) Platform     1.5.0_06
Oracle IDE     10.1.3.41.57
Struts Modeler Version     10.1.3.41.57
UML Modelers Version     10.1.3.41.57
Versioning Support     10.1.3.41.57
Message was edited by:
pakitwo

I found the answer:
Write in your own .css file:
"af|menuPath::separator-icon {content:" > ";}"
and breadcrumb will get this value

Inserting Rows in an Editable Table

Application Focus: JSF with ADF/BC.
watching Steve Muench´s Screencast on "Creating an Editable Table with a Dropdown List in Each Row" i was inspired to add a functionality to add rows.
Lets say i have an Employee and Departments table. If i want to add three new employees in the employee editable table - that wont work - it seems that adding rows aint that simple, cause it seems not possible to commit more than one row at a time
what i did according to forum posts and how-to´s:
1. dropped "insert" from data control palette
2. altered binding to from create to "CreateInsert"
works ok, but if i press the button twice (3x, 4x) the new rows are shown, but if i commit them, only one is in the database?
Any tips on that would be appreciated.

I'm trying to a similar thing, create an input screen that allows you to add muliple rows at the same time some rows having a drop down list. I've read the following How to which lets me edit multiple rows but if I add a create button or a CreateInsert button it doesnt seem to give me rows to create.
How To Create Multi Row Edit Forms in a JSP Page with Oracle JDeveloper 10g
http://www.oracle.com/technology/products/jdev/tips/mills/JSP_Multi_Row_Edits.html

AS: setting table properties in ID CS3 invokes odd error message

I'm converting an InDesign CS2 script to CS3 and am having the strangest error. This code used to work in ID CS2 for the selected text frame:
>tell parent story of insertion point 1 of selection
>set theTable to make table with properties {width:gridColumnWidth, body row count:totalGridRows, header row count:0, footer row count:0, column count:totalGridColumns, height:gridRowHeight, left border stroke weight:gridBorderWeight, right border stroke weight:gridBorderWeight, top border stroke weight:gridBorderWeight, bottom border stroke weight:gridBorderWeight, left border stroke type:"Solid", right border stroke type:"Solid", top border stroke type:"Solid", bottom border stroke type:"Solid", space after:0, space before:0}
>end tell
But now it chokes and gives me this strange error:
>Adobe InDesign CS3 got an error: Invalid value for set property 'height'. Expected number or string, but received 21.80909090909093.
Huh? That obviously has to be a number or string, so what's going on? What's even weirder is if I delete all the table properties except for weight and height, the script doesn't give the error. I know I can do this with a table style, but I'd like to understand what the problem is before I take that step.

Shane:
I was completely distracted by another project and am just getting back to addressing this problem. Sorry about that.
Anyway, your suggestion was a sound one: I set the width and height in the first statement, added everything else in a second statement, and it worked perfectly. Thanks! Any idea why I needed to do so?

Using the enter key on an editable table

Hi,
I'm using 11g adf and I can't figure out how to get past this:
When going through an editable table (with editingMode="editAll") using the enter key, it will stop after a certain number of rows, equal to the value of fetchSize. If I want to go down further, I have to scroll down another way to make it fetch the next set of rows, it won't go to the next row with the enter key. It simply won't execute the query to fetch the next rows.
Increasing the fetchSize will just delay the problem to a row further down (and decrease the performance since the fetch operation can take quite a bit longer).
I've tried to put a clientListener on both the table or the inputText fields to intercept the enter key, but that won't work when the table is in editable mode.
Is there any way to fix this problem?

Hi,
I've tried to put a clientListener on both the table or the inputText fields to intercept the enter key, but that won't work when the table is in editable mode.
The clientListener needs to be on the inputText fields. Then in JS you need to call a server listener which will check if the current row is already at the range end and if calls NextSet (you can provide this as a method binding). Unfortunately after this you will need to PPR the table to show the new rows. This is how I would try it.
Frank

Can you edit file properties using Labview?

Except for the file attributes like 'read-only' and 'hidden', Windows 2000 & XP also have file properties like 'keywords', 'comments' and 'description'.
Is there any way that I can edit these properties in Labview?

RichElswick wrote:
nope, we never got that far and I am no longer on that project.
And it would be a bitch to implement. Basically those properties are implement using propertysheet handlers. That are shell extensions that can be installed in Windows and in the registry added to one or more file types. On loading the property dialog the shell (basically only an Explorer thing) sees that for that specific file type there are property sheet handlers registered and then loads them as an extra property sheet into the dialog.
There is no common API to retrieve and lets forget about changing the information those property sheet handlers deal with programmatically. And every property sheet handler retrieves the actual properties according to his own private information, such as image properties in JPG files but possible also extra information in the meta data of a file on advanced files systems such as NTFS (the security property sheet for instance).
So you would have to create a Windows dialog, load the according property sheet handlers into it and then have the user deal with that interactively. I doubt that this is what you want.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Editing table properties

Similar Messages

Maybe you are looking for