Editing text after designing a new form and converting it in to pdf

I designed a form and converted it in to PDF format for printing. The form has some formatting errors and needs to be edited. However attempt to do so results in a message stating that it is a secure documents and can not be edited. This is inspite of the fact that I have not placed any security restriction on it or on the folde in which it is stored. Can anyone help?
Moneish

Hi,
Just providing some information in addition to George's reply.
The PDF created by FormsCentral, assuming you are collecting responses online, is configured to enable extended features in Adobe Reader to allow respondents to save the form. To edit the PDF in Adobe Acrobat you must use the File > Save a Copy... menuitem to create a copy of the document that is not Reader-extended.
When you have finished editing the document you should remember to re-configure the PDF for fill-in and save within Adobe Reader.
Regards,
Brian

Similar Messages

How do I edit text in a fill-in form?

How do I edit text in a fill-in form? I am using Adobe Acrobat Pro version 10.1.8 in Mac OSX. The document was created in Word, saved as a pdf, opened in Acrobat, and form fields added. Now I need to change some of the text on the original form (mostly just dates). Ideally, I wish there were a way to edit the forms overall - add or delete lines, edit text, etc. I've done this before, but I always seem to need to go back to Word, edit the original document, and then re-create the form fields... it takes me a huge amount of time, making sure each field is formatted correctly (font, size, wrapping, text resizing, etc) so it looks ok when the user enters their data and prints it. Please, tell me there is a better way!
If the solution is upgrading to a higher version of Acrobat, I'm listening... but ideally I can get this batch done in the software I have, then worry about learning the newest version.

Fonts are Licensed asset's subject to single user use. They are not intended to be exchanged, redistributed, etc.
As part of the PDF standard they included in a document so that the document can be viewed reliably without the font be installed on the viewing station.
To edit you must have the font installed on your computer. The ability for second parties to use the font would violate font licenses.

I have just created my first form and saved it as a PDF. The editable boxes have a background colour of Blue and I would like to change this. Can it be done?

Hi guys i have just created my new form and it was very easy. however once i convert it to a PDF the editable boxes in the form are blue and i would like to change the colour. does any know if this can be done?

The blue background is the field highlighting that you have the option of turning off. If you don't see the purple bar on top with Highlight Fields toggle button, it should displayed by clicking the top icon (purplish) in the navigation pane on the left

HT1222 ipad apps 1 I lost all after I installed new windows and I tried to connect it between your computer and iPad, what's the solution? (Please Inbox : Bambangtjio@yahoo.o.id) Thanks

ipad apps 1 I lost all after I installed new windows and I tried to connect it between your computer and iPad, what's the solution? (Please Inbox : [email protected]) Thanks

Hi,
Sounds like it isn't to serious. the Bluetooth connection had an error and that is that generated
the Problem report.
When the Blackberry started to use Bluetooth the "gold standard" was using Microsoft's
"native" windows drivers. Now, every major PC company has there own version
Thus the problem report.
There is rather involved and lengthy procedure to check and install the correct Bluetooth drivers
in the Dell, but I really don't think you want to take that on.( Nod you head and say H*LL YES)
Here is what I propose;
The problem report needs to be resolved or it wont go away. Read the manual, call Dell,
try apologizing to it and that you'll never never do it again, what ever it takes!
Make the best investment you can make for your Blackberry, buy a media card.
All the memory in the BB is dynamic, this facilitates the functions of the phone.
By storing media in that memory, you effect are wasting X amount for file storage.
Store all media and files on the media card, and you will have a smooth running device.
They run about $25.00usd, they are easy to install, and they also make moving your
media a snap. You will need the USB adapter that came with it, but you can get that at
your local carrier store.
So if you agree with this I need some info.
On the Blackberry go to the options icon,click then scroll up to ABOUT.
I need your software version number, it's listed in this format: 4.x.x.xxx.
Send it back to me and I can tell you what size card you can get.
Let me know your thoughts!
Thanks,
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Even editing text in Design View is now difficult in DW CC?

Hi All,
Even editing text in Design View is now difficult in DW CC? I just upgraded.
It seems difficult - or impossible - to select, copy and paste multiple blocks of text from one place to another - unless you work in the Code View.
Text blocks are separate entities, separately edited? I can't even copy and paste an image from one file into another.
Previously, I'd regularly select an image - or a load of text - and replace it with some copied from elsewhere by 'pasting'.
I must be missing something. Perhaps there's another mode of working.
Thanks,
John

You're probably in Live View.
CC2014.1 does some strange things when it comes to Live and Design Views.
1. Design View is gone for Fluid Grid Layouts, so all editing has to be done in Code or Live View. There is a work around to get Design View back for those in Post #6 here: Editing Text and Adding Links Is Crazy in DW CC-2014.1
You can also add your voice to get it back here: Provide "Design View" for Fluid Grid Webpages
2. Design and Live Views are now a dropdown menu. Check the top left of your workspace, you should see Code | Split | Live with a small triangle next to Live. Click it to access Design View in everything but FGL pages

When creating a fillable form and saving it as a pdf, the default color of the data fields is a light blue. How do I change the color to something else that will copy better, e.g. a light yellow?

When creating a fillable form and saving it as a pdf, the default color of the data fields is a light blue. How do I change the color to something else that will copy better, e.g. a light yellow?

It's probably the fields highlight color of the application, which you can change via Edit - Preferences - Forms.

I have a brand new MacBookProo and I can not open PDF files from my desktop. Can anyone help me with this please?

I have a brand new MacBookProo and I can not open PDF files from my desktop. Can anyone help me with this please?

A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273

How to increase count in a text increases on each new form submitted?

Hi All,
I have a field in infopath form as 'RefNo', whenever new form submitted, it count should increase. How to achieve this scenario?
Thanks in advance!

I'm not sure if you can do this to display on form load, but you could do this on submit and edit form.
Refer to the following posts,
http://sharepointryan.com/2011/05/25/add-an-auto-numbering-field-to-an-infopath-form/
http://sharepointfromthetop.wordpress.com/2011/08/31/auto-numbering-infopath-forms/
--Cheers

How to edit text in design mode - i.e get an I cursor instead of arrow

DW CS6 This is a very basic unclear on concept question. I normally work in code view and have no problems. Sometimes there is a large block of text within a paragraph which is in a div.
I would like to correct a simple typo or insert some more text directly from the design mode display. However, almost all the time, when I click on the spot I want to modify, the cursor remains an arrow and the entire div gets a yellow border. I still have the select arrow, not the vertical bar I need to edit.
Sometimes I seem to stumble onto the right set of clicks and get the edit bar.
Thanks for any suggestions.

Design View can get pretty cranky when your code has errors.
Check the validator at http://validator.w3.org and make sure you're working with clean code before resorting to wiping preferences, config folders or reinstalling.
If your code is clean and it's still not allowing you to click your text in Design View, you may have a z-indexing issue. I notice on pages that use a lot of positioning (APDivs) you can accidentally cover up your text boxes with blank/transparent areas of other elements and cause problems when trying to access that text at a later date.
It's all guesswork though without seeing your actual page.
Could you post a link?

Editing Text After Saving

I am working in Premier Elements 9. I have a number of text slides and saved my work. I went to go back to edit some of the text and I am unable to do so. I can only add new text. Is there a way to edit text?
Thanks!

You are most welcome.
PrE's Titler is a surprisingly powerful tool. It does have a few limitations, like alignment grids (has some alignment tick marks), a full zoom, and hyphenation, but it is still very powerful, especially with the use of Styles for its Text and also for its Shapes.
With Titles, one tripping point for some, is that Titler is used to create Titles, and will place them into the Project Panel for use. One can then have multiple Instances of that Title on the Timeline, and if one makes a change to one of those Instances, or to the Title from the Project Panel, that change will affect all Instances of that Title. Often, this is what one wants, though not always. If you have created a Title, and wish to use variations of that Title, but say with different Text, then you will want to Duplicate that Title, and just edit the Text in each Duplicate. There is a big, and useful difference, between Duplicate Titles and Instances of a Title. Many users do not understand those differences, and become concerned when they edit an Instance of a Title, and cannot understand why that edit affects all other Instances of that Title - that is the way that it is supposed to work. If one needs to edit just one Instance of a Title, they would Duplicate that, make the edit and replace that Instance with the Duplicate.
Good luck and happy editing,
Hunt

TM doesn't see its backup after migrating to new iMac and restoring system.

TM doesn't see its backup even though it still exists on the HD. I just migrated to a new iMac. After using OS X disc to 'Restore System From Backup' with TM backup it was showing the latest backup attempt had failed. The same disk was highlighted under TM Preferences too. But once I reset it TM began to make a new backup under a new folder/computer name (adding a number to the end). Is there a way to make TM see the existing BU and continue on?
Message was edited by: Sakahara

I'll try to recall to the best of my memory what I did... It's been stressful, frustrating, trying to deal with it.
Computers:
1) iMac6,1 (Late 2006) Intel 2.16 GHz Nvidia OS X 10.5.6
2) iMac8,1 (Early 2008) Intel 2.8 GHz ATI OS X 10.5.4
Perform final backup of iMac #1 with TM and SuperDuper!
Shut down and disconnect.
Hook up iMac #2 and power up.
After OS X intro select 'Transfer from another Mac' with Set Up Assistant (note: this was from the SD! backup).
Everything was selected for transfer; Users, Apps, Network,..etc. (I assumed it would update OS X too).
Transfer complete.
Restart.
Log in.*
* I have both Admin and User account. I noticed things weren't performance was off; log in was slow (Menu Bar items took longer to display, clock too), and generally overall apps,..etc seemed slow. Apps were asking for license and reg info too.
Second attempt (restore system from TM backup):
Startup from OS X 10.5.6 disc.
Erase HD with DU.
Select 'Restore System from Backup'.
Select TM backup.
After that completed, restart computer.
And that brings us to now. Well, sort of.
So what is the proper way to migrate as it were from between two different Intel iMac's? I have to assume I transfered over system files that caused a conflict with the new iMac's HW, correct? What can I do now? I've already performed new backups of both SD! and TM. I didn't think it mattered since either way the backups come from my old system. I'm guessing I should have updated OS X first on the new iMac and only selected User files, Apps, Network settings,.. etc., for transfer, or maybe installed apps fresh. I thought I was doing it correctly.
The new iMac still seems off with performance to me. I've tried performing multiple 'Repair Disk Permissions' too. There are about 32 differing permissions but DU doesn't seem able to repair them as they come up again and again. Here are some examples;
2009-05-15 09:23:47 -0700: Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-05-15 09:23:47 -0700: Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-05-15 09:23:47 -0700: Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-05-15 09:23:47 -0700: Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-05-15 09:23:47 -0700: Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-05-15 09:23:52 -0700: Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/CodeResourc es", should be -rw-r--r-- , they are lrw-r--r-- .
2009-05-15 09:23:52 -0700: Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/BlackAndWhiteEffect.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-05-15 09:23:52 -0700: Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/CubeTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-05-15 09:23:52 -0700: Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DissolveTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-05-15 09:23:52 -0700: Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DropletTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-05-15 09:23:52 -0700: Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/FadeThroughBlackTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
My final attempt to straighten this out is to install from OS X disc fresh (erase/install). Transfer only User files, Network settings, anything pertinent to my Users (email, browser, keychain,..),... and nothing else. Reinstall 3rd-Party Apps. I had to do this before after updating from Tiger to Leopard because it didn't take well.
Any help/insight appreciated.

Setting up OSX after installing a new SSD and moving HDD to optical bay

Hey all,
I know there are a tonne of other posts similar to this one in here, but I couldn't find the specific answers I was looking for.
Soon I'm going to remove my optical bay and put my current HDD in it's place, and install a brand new SSD where the original HDD once was. I'm comfortable with the hardware installation but am wary about what to expect on first power up afterwards.
I would like to ideally run OSX Mavericks and all of my apps (everything from Notepad to Premiere Pro) from the SSD, and leave all of my data on the HDD. I have an early 2011 13" Macbook Pro, model number A1278.
- When I first turn the computer on after the hardware switcheroo, what can I expect to see? How do I re-install OSX Mavericks onto the new drive? Am I right in thinking that Mavericks is merely an upgrade rather than a whole new OSX and that I will need to install Lion and then upgrade to Mavericks rather than just reboot immediately to Mavericks?
- How can I then remove Mavericks from the original HDD?
- Exactly which files do I need to move to completely relocate the apps to the new drive? Is it as simple as moving the entire applications folder over, or are there hidden files dotted all over the place that I need to consider also?
Thanks in advance,
Adam

Adam,
if your current HDD is a SATA III (6.0 Gb/s maximum throughput) drive, then you might find that you’ll have problems with it in the Optibay position. If this is the case, you’d probably be better off putting your SATA III drive into an external enclosure, and purchasing a SATA II (3.0 Gb/s maximum) drive to install in the Optibay.
If you have a SATA-to-USB or SATA-to-FireWire adapter, you can connect your SSD externally and format it with Disk Utility. After that, you could use a cloning utility to copy the contents of your internal HDD to your SSD (presuming that the SSD is at least as large as the amount of space currently used on your internal HDD), and then boot from the external SSD using Startup Manager to make sure that everything works well on it; that will save you from having to make sure that all of the scattered hidden files have been migrated. Once you’ve confirmed that your apps run well from the SSD, you can then install the SSD and move the HDD to wherever it’s going. An advantage of keeping Mavericks on your HDD is that you can boot from it if needed, e.g. should your SSD develop a problem.

How do I save and convert Email docs to PDF?

I Just purchased a new IPad Air. I downloaded adobe redder. I received an email formatted in wind at but, I am unable to open and convert to PDF.. Can someone help?

You've misunderstood the way Adobe Reader works. If you have a PDF file in your email, you can use Reader to view it. Reader doesn't convert your email into a PDF.

Images downsized and converted when exporting to PDF

I have Pagemaker 7.0.1 installed on Virtual XP so that I can help out a family member.
Pagemaker's embedded Acrobat 4 was not working properly so I installed my Acrobat 9.0 on Virtual XP. This unfortunately has not solved the problem, which is:
My images are greyscale and 300 ppi when imported into Pagemaker. When exported to PDF using Acrobat 9.0, the images are being converted to CMYK and exported at about 50% of the actual size. Interestingly, those images that are only at 200 ppi are converted but not downsampled.
This is happening no matter how I fiddle with the settings. Happens to both jpegs and tiffs.
I found an old thread on another forum where this problem occurred but a solution was not found or posted.
Any ideas?
Michelle

This reply is a series of comments and suggestions rather than a definitive answer.
1. Your set up is less than perfect, if not unstable, and will be prone to all sorts of bizarre behaviours.
2. Never copy/paste a graphic or table into PageMaker. Always use the Place command. The only "exception" would be that you can copy and paste a properly Placed graphic from within your PageMaker document.
When placing images in a PageMaker file, the following message appears: “The graphic in the linked file would occupy xxxxxxx bytes in the publication. Include the complete copy in the publication anyway?” The correct answer to this question is always "NO".
(You can permanently avoid this popup in future docs by unchecking "store copy in publication" under Element -> Link Options with no publication open. You can do the same to avoid further prompts in pre-existing documents.)
3. Try updating PM to Ver 7.0.1a which had a better Export… AdobePDF…macro. http://www.adobe.com/support/downloads/product.jsp?product=34&platform=Windows
4. In PageMaker’s Print dialogue, click on the Options button, and check "Write PostScript to File." Select the "Normal" radio button. Set both Type 1 and TrueType fonts to download. As always, set the Send TIF/Images option to Normal and NOT Optimized. Make other settings elsewhere in the print dialog as desired, such as "paper" size, crop marks, separations, etc.
5. With your non-standard setup, try the two stage print then distill process. Create a PS file using a postscript printer file, then load Distiller and convert the PS file to PDF. Note: if you have hyperlinks in your PMD file, they will not appear in your PDF and need to be re-created using Acrobat.
6. It's time to leave PM and move on to InDesign - see it as PM Ver 13.
7. Aternatively, use PM7 on a contemporary Win2K PC. http://bigjohnd.org.uk/PageMakerExportPDF/index.htm

Script for scanning and converting cover page of PDF to JPEG

Hi we are building an application that would allow the upload of PDFs. We want to be able to scan and convert the cover page to jpeg for display purposes.
Does anyone know whether there is a ready made script to do this?

This would require a plug-in so that you could access the AVConversion methods. Unfortunately since Acrobat is not licensed for server use you would not be allowed to have this plug-in as part of an automated workflow on a server accepting uploads.

Editing text after designing a new form and converting it in to pdf

Similar Messages

Maybe you are looking for