Editors

Ok, early morn again, I'm good and thoroughly bored with this one class I'm working on... so... back to the forums! What editor do you all use? I'm partial to jGRASP, though it has some bugs, some major bugs, and wish Auburn would go back to supporting pcGRASP. Anyone use JBuilder? Sound off in favor of your favorite editor.

When I log into my Xenix system with my 110 baud teletype, both vi and Emacs are just too damn slow. They print useless messages like, 'C-h for help' and '"foo" File is read only'. So I use the editor that doesn't waste my VALUABLE time.
Computer Scientists love ed, not just because it comes first alphabetically, but because it's the standard. Everyone else loves ed because it's ED!
"Ed is the standard text editor."
Of course, on the system I administrate, vi is symlinked to ed. Emacs has been replaced by a shell script which 1) Generates a syslog message at level LOG_EMERG; 2) reduces the user's disk quota by 100K; and 3) RUNS ED!!!!!!
Let's look at a typical novice's session with the mighty ed:
golem> ed
help
quit
exit
bye
hello?
eat flaming death
^C
^C
^D
Note the consistent user interface and error reportage. Ed is generous enough to flag errors, yet prudent enough not to overwhelm the novice with verbosity.
Ed, the greatest WYGIWYG editor of all.
When I use an editor, I don't want eight extra KILOBYTES of worthless help screens and cursor positioning code! I just want an EDitor!! Not a "viitor". Not a "emacsitor". Those aren't even WORDS!!!! ED!
ED! ED IS THE STANDARD!!! TEXT EDITOR.
When IBM, in its ever-present omnipotence, needed to base their "edlin" on a UNIX standard, did they mimic vi? No. Emacs? Surely you jest. They chose the most karmic editor of all. The standard.
Ed is for those who can remember what they are working on. If you are an idiot, you should use Emacs. If you are an Emacs, you should not be vi. If you use ED, you are on THE PATH TO REDEMPTION. THE SO-CALLED "VISUAL" EDITORS HAVE BEEN PLACED HERE BY ED TO TEMPT THE FAITHLESS. DO NOT GIVE IN!!! THE MIGHTY ED HAS SPOKEN!!!

Similar Messages

Error while opening a datafile in dataprep editor

Hi
Error while opening a datafile in dataprep editor
"opening the datafile failed see the message panel for details"
"server.com.DEV.Perf Read data file September 17, 2009 8:31:51 AM EDT Failed : 1030001"
can anyone help me through this error..
right i am trying to load data by creating a rules file..but could not open the file in dataprep editor..
Thanks,
Ram

In some cases restarting the EAS service has fixed this error for me.

Text Editor -options

Hi,
I have been using text editor control.
In this when we click load file button...an open prompt window appears..
there we will be finding Files of type... dropdown..containing values like text(.txt) file and All file types..
Is there any way to restrict this dropdown to single value..i mean to .txt file..should only be viewed omitting
All files option in dropdown..
i am using CL_GUI_TEXTEDIT..control...
Is there any option to do it...
Please Help me out.
Thanks & Regards,
Sandy.

Hi Sandy,
I don't think there is any method for this. As the dialog box opened is depending on your OS.
But, you can cross check the uploaded file for " .txt " using CP (contains pattern) function of string.
DATA: xl type string.
xl = '*.txt'.
IF not P_FILE CP xl. "P_FILE is name of file you will get.
"Error"
ENDIF.
Sachin

Options - Text Editor - C/C++ missing intellisense entry. Intellisense not working

Options -> Text Editor -> C/C++ missing intellisense entry. Intellisense not working. Solutions to turn options for the editor off and on are not working. The intellisense entry is present for other languages,
such as C#, but not C/C++.
By not working, I mean the intellisense right click menu items are grayed out, and intellisense files are not produced.

Hi JerroldBrody,
Thank you for posting in MSDN forum.
>>I mean the intellisense right click menu items are grayed out, and intellisense files are not produced.
Based on your issue, could you please share me a screen shot about the intellisense right click menu items are grayed out?
Generally, I know that it is default that we can enable the intellisense for C/C++ by going to the TOOLS->Options -> Text Editor -> C/C++ ->Advanced-> IntelliSense like the following screen shot.
So please try to check if you set Disable Intellisense property as False in the VS IDE.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Image not printing in Layout Editor

I am using BI Publisher 11.1.1.6.
I tried inserting an image in Layout Editor to display company logo.
Followed the steps below.
1. Click on Image icon in Layout editor.
2. Select 'Field' Radio button, in the image URL: selected the field LOGO which
comes from an SQL query.
select value LOGO
from Pro_Ent_table
where section = 'SYSTEM'
AND KEY = 'CORPORATE_LOGO_PATH';
Value is: http://www.noug.org/clubs/165905/graphics/bip.jpg
3. Click on insert in the Layout editor the logo can be seen.
4. But when run the report, we are getting the following errors in different output formats.
a. Interactive viewer - No error, blank screen had been shown.
b. PDF - File does not begin with '%PDF-'.
c. Excel - The report cannot be rendered because of an error, please contact the administartor.
oracle.xdo.XDOException: java.lang.reflect.InvocationTargetException
d. RTF - The report cannot be rendered because of an error, please contact the administartor.
oracle.xdo.XDOException: java.lang.reflect.InvocationTargetException.
Please let me know if more information is required.
Thanks in advance

Metadata. Check the files and strip it or save to a format that doesn't support it in teh first place. Perhaps the copy&paste messes up some stuff on that level such as DPI flags or stored printer data...
Mylenium

How to delete the commented out lines in PC editor of a SAP Script?

Hi Experts,
I hv lot of commentde out code in the PC editor of a my_SAP_Script.........so, wanna to delete all this commented out code, so, let me know that, Do we hv any option other than manual deletion.
Currently am doing it by,
keeping the line totally blank,
keeping the left small box, where we define paragraph formts,
going BACK,
save + activating,
now, those lines r disappearing!!
but, let me know, Is there any other MENU/push button optin to delete these lines?
replies appreciatesd,
thanq

[pc editor doc|http://help.sap.com/saphelp_nw2004s/helpdata/en/f4/b49f1b453611d189710000e8322d00/frameset.htm]

Clicking on jsp page does not open it in visual editor.

All "open jsp tags in visual editor" checkbox is on for all libraries.
Jdeveloper version is 10131 build 3914
Message
BME-99003: An error occurred, so processing could not continue.
Cause
The application has tried to de-reference an invalid pointer. This exception should have been dealt with programmatically. The current activity may fail and the system may have been left in an unstable state. The following is a stack trace.
java.lang.NullPointerException
     at oracle.jdevimpl.webapp.design.util.InvisibleJspElementsUtil.applyInvisibleJSPElements(InvisibleJspElementsUtil.java:108)
     at oracle.jdevimpl.webapp.design.util.InvisibleJspElementsUtil.applyInvisibleJSPElements(InvisibleJspElementsUtil.java:78)
     at oracle.jdevimpl.webapp.design.util.InvisibleJspElementsUtil.applyInvisibleJSPElements(InvisibleJspElementsUtil.java:47)
     at oracle.jdevimpl.webapp.design.view.DesignTimeFixedViewDocument.rebuildTree(DesignTimeFixedViewDocument.java:162)
     at oracle.jdevimpl.webapp.model.content.dom.view.proxy.ProxyViewDocument.initialize(ProxyViewDocument.java:80)
     at oracle.jdevimpl.webapp.editor.AbstractWebAppEditor.rebuildViewDocument(AbstractWebAppEditor.java:686)
     at oracle.jdevimpl.webapp.editor.html.HtmlEditor.rebuildViewDocument(HtmlEditor.java:621)
     at oracle.jdevimpl.webapp.editor.jsp.JspEditor.rebuildViewDocument(JspEditor.java:209)
     at oracle.jdevimpl.webapp.editor.AbstractWebAppEditor.createDocuments(AbstractWebAppEditor.java:1206)
     at oracle.jdevimpl.webapp.editor.AbstractWebAppEditor.open(AbstractWebAppEditor.java:393)
     at oracle.jdevimpl.webapp.editor.html.HtmlEditor.open(HtmlEditor.java:172)
     at oracle.jdevimpl.webapp.editor.jsp.JspEditor.open(JspEditor.java:113)
     at oracle.ideimpl.editor.EditorState.openEditor(EditorState.java:239)
     at oracle.ideimpl.editor.EditorState.createEditor(EditorState.java:147)
     at oracle.ideimpl.editor.EditorState.getOrCreateEditor(EditorState.java:90)
     at oracle.ideimpl.editor.SplitPaneState.canSetEditorStatePos(SplitPaneState.java:231)
     at oracle.ideimpl.editor.SplitPaneState.setCurrentEditorStatePos(SplitPaneState.java:194)
     at oracle.ideimpl.editor.TabGroupState.createSplitPaneState(TabGroupState.java:103)
     at oracle.ideimpl.editor.TabGroup.addTabGroupState(TabGroup.java:275)
     at oracle.ideimpl.editor.EditorManagerImpl.createEditor(EditorManagerImpl.java:1261)
     at oracle.ideimpl.editor.EditorManagerImpl.createEditor(EditorManagerImpl.java:1196)
     at oracle.ideimpl.editor.EditorManagerImpl.openEditorInFrame(EditorManagerImpl.java:1077)
     at oracle.ideimpl.editor.EditorManagerImpl.openDefaultEditorInFrame(EditorManagerImpl.java:1036)
     at oracle.adfdt.controller.util.CommonUtils.showEditor(CommonUtils.java:575)
     at oracle.adfdt.controller.jsf.diagram.shape.PageNode.gotoPage(PageNode.java:355)
     at oracle.adfdt.controller.jsf.diagram.shape.PageNode.invokeAction(PageNode.java:292)
     at oracle.adfdt.controller.jsf.diagram.registry.RPageNode.editContents(RPageNode.java:210)
     at oracle.bm.diagrammer.track.SelectionTracker.keyPressed(SelectionTracker.java:1338)
     at oracle.bm.diagrammer.track.ModularTracker.processEvent(ModularTracker.java:253)
     at oracle.bm.diagrammer.track.SelectionTracker.processEvent(SelectionTracker.java:148)
     at oracle.bm.diagrammer.track.TrackerStack.processEvent(TrackerStack.java:375)
     at oracle.bm.diagrammer.BaseDiagramView$53.processEvent(BaseDiagramView.java:733)
     at oracle.bm.diagrammer.PageView$PageViewPanel.fireEvent(PageView.java:2933)
     at oracle.bm.diagrammer.PageView$PageViewPanel.processEvent(PageView.java:3111)
     at java.awt.Component.dispatchEventImpl(Component.java:4407)
     at java.awt.Container.dispatchEventImpl(Container.java:2042)
     at java.awt.Component.dispatchEvent(Component.java:4237)
     at java.awt.KeyboardFocusManager.redispatchEvent(KeyboardFocusManager.java:1828)
     at java.awt.DefaultKeyboardFocusManager.dispatchKeyEvent(DefaultKeyboardFocusManager.java:693)
     at java.awt.DefaultKeyboardFocusManager.preDispatchKeyEvent(DefaultKeyboardFocusManager.java:952)
     at java.awt.DefaultKeyboardFocusManager.typeAheadAssertions(DefaultKeyboardFocusManager.java:824)
     at java.awt.DefaultKeyboardFocusManager.dispatchEvent(DefaultKeyboardFocusManager.java:657)
     at java.awt.Component.dispatchEventImpl(Component.java:4279)
     at java.awt.Container.dispatchEventImpl(Container.java:2042)
     at java.awt.Window.dispatchEventImpl(Window.java:2405)
     at java.awt.Component.dispatchEvent(Component.java:4237)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:600)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:273)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:183)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:173)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:168)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:160)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:121)
Action
If further errors occur, you should restart the application.
Also, report the problem on the JDeveloper forum on otn.oracle.com, or contact Oracle support, giving the information from this message.
________________________________________________________________________________

one more thing...the code runs properly on localhost... i tested it on my pc n it was fine..both in firefox and IE...
i guess there is a specific syntax i need to follow (strict syntax) but i dunno what it is...:(

Error opening a transaction in Logic Editor

Hi,
Using 11.5 SR3.
I have a transaction which some 20 sequences and 30 action blocks. I configured it as a listener. For some strange reason, I just cannot open the transaction in the Logic editor.
Another issue, though not sure if its related to the same thing is that some of the transactions say 'executing' even though the last sequence in the transaction is executed (the last sequence is a file write and the file is already created) when running from the Logic Editor. I also feel that the performance of the transaction execution has gone down recently. Not sure if all these issues are related or each one is a separate issue.
Any clues from the gurus?
Ravi.

Hi Ravi,
Found a SAP Note on the transaction loading issue.
Note: 960362
Title: Large Transactions can crash server
URL: [Click Here|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_xap/~form/handler]
It mentions increasing the heap size as an option.
Cheers,
Jai.
Edited by: Jai Tamhane on Feb 7, 2008 12:23 PM

Since installing 3.6.9 my Joomla content editor pop-up windows no longer return the URLs selected

I recently upgraded to Firefox 3.6.9 and found that when using the editor in a Joomla 1.0.15 website , the content editor pop-up windows no longer return URLs selected (eg: image or file URL to be used in a link). I have been using the site with no problems for many years, and the problem was cured when I reinstalled 3.6.8

Thanks cor-el but the problem is not in my web development but is a new issue/problem in FireFox which was not present in all versions up to and including version 3.6.8 and was only introduced in version 3.6.9. I have also established that the same problem also exists in FireFox version 4 beta 6 and have therefore also raised a second question today.
My understanding was that I should raise these issues in this forum, but I will also check out the other forum.

Command in ABAP Editor to improve the source code

Which command in ABAP Editor to be used to improve the readability of the program code ?plzz tell
Edited by: Alvaro Tejada Galindo on Feb 13, 2008 3:48 PM

Use Pretty Printer or do a CTRL+F1.
Also u can change the settings of the way u want preety printer to behave by
going in the Settings->Abap Editor -> Pretty Printer

Logical expressions in Link editor

Hi all,
Is it possible to define logical expressions (using AND, OR) in the Link editor of BLS or are we left with only using the Conditional Action block? Thanks...

Yes it is.
For AND : <<Condition1>> && <<Condition2>>
For OR : <<Condition1>> || <<Condition2>>
You can use the double ampersand (&&) for AND and double pipe (||) for OR

Using Adobe Bridge as Aperture 3 External Editor

I have a problem that I can't seem to solve and I'm hopeful that a post here can get me closer to some resolution. I recently started using Bridge for noise reduction and PS for high pass sharpening. The downside is my work flow is now shot full of holes! I have Bridge as my external editor; I make the edits in Bridge then do a high pass sharpen as well as any other edits I might choose to make in PS. If I need to, I flatten the image if I have layers. It is here that my problem begins.
Aperture creates the new tiff version within it's program as soon as I choose to edit in Bridge, but I don't know the exact process to save that image while in Bridge or Photoshop to reflect the changes in Aperture. Another question I have is which version of the image in Bridge I should be editing the jpeg or tiff? any help here would be greatly appreciated!

I use Bridge as editor because once there, I go into "camera raw" to process images.
So now you're bringing a third app into the equation. Bridge, ACR and Photoshop are all individual applications. If you're not using an app like Aperture then Bridge might be the front end for the other two, but in the case you describe it has no role.
Another thing to think about: ACR ("camera Raw") is for processing Raws - which job you are currently doing with Aperture. You're not sending Raws to Bridge/ACR... You're sending tiffs.
I think you need to rethink your workflow somewhat. I'm not sure you've grasped what the various tools actually do.
Regards
TD

List of missing features in CC 2014 for film editors

hello everyone,
I was thinking about some features I miss in CC 2014 (and I really was hoping they will be there, because the most of them are just basics...) and made a list which I want to send (again...) to Adobe as feature request. Premiere improved a lot in last years, but there are still some basic functions which you absolutely need as a professional editor, which still aren`t implemented. What do you think about the list? or maybe did I overlook some of the new features in CC 2014? Just so you know, I`m using Premiere mostly for editing movies (shorts, but will edit my first feature film this year), also promotional films, but much more less. So my biggest concern right now is if Premiere is the right choice for editing a feature, which of course means a lot of material, probably Red Raw.
so here`s what I totally miss in Premiere:
1. auto sync/auto merge: synching by timecode or waveform all of the video and audio clips in the bin/in the timeline at once and not one after another. and merging them all at once, not one after another. it works of course, but it takes ages!
2. merged clips should be more flexible,
- it should be possible to use the option "interpret footage" on merged clips, sometimes you have to modify them after they were merged and you`re already editing for a long time.
- replacing raw footage should also replace the footage in the (already merged and edited in a timeline) merged clips
3. the aaf export is much too simple, there are a lot of options I miss there. it is great solve in Avid and in automatic duck in Final Cut, something like that would be great
4. the possibility to change color space in the project and play out. yes, this option is available in After Effects, but you can`t always use it, because there is some footage you can`t import in AE (like titles!)
5. .. which leads me to the last point: it should be possible to export the titles from Premiere with an alpha channel (I`m using the titles as the subtitles)
bugs that need to be fix:
- audio dropouts!
Are there any feature films editors here? what is your experience with working on big projects on premiere?

Since I don't know how to edit my own posts . . .
Another missing feature, automatically filling in formulas when a new row is created. For instance, say you have 3 columns, 1 + 2 = 3. In Office 2004, when I add a new row, that formula is automatically inserted. It's just one of those nice little time saving features that would be nice.

I can not open the Editor in Photoshop Element 12

Hallo and sorry for my bad english!
I can not open the editor in Photoshop Elements 12.
After clicking the stands ".... only the workspace is loaded", but nothing happens.
After installation in May, he has about a month and suddenly no longer works.
What can I do?

Version CS3
Adobe DNG Converter and Camera Raw 4.6 update
6.2MB
10/10/2008
Camera Raw 4.6 update
3.5MB
10/10/2008
Camera Raw 4.5 update
3.5MB
7/28/2008
Adobe DNG Converter and Camera Raw 4.5 update
6.1MB
7/28/2008
Adobe DNG Converter and Camera Raw 4.4.1 update
5.4MB
4/10/2008
Camera Raw 4.4.1 update
3.3MB
4/10/2008
Camera Raw 4.3.1 update
3.3MB
11/15/2007
Adobe Photoshop 10.0.1 update for Adobe Photoshop CS3
72.8MB
11/15/2007
Adobe DNG Converter and Camera Raw 4.3.1 update
6.1MB
11/15/2007
Adobe DNG Converter and Camera Raw 4.2 update
5.9MB
9/13/2007
Camera Raw 4.2 update
3.2MB
9/13/2007
Camera Raw 4.1 update
3.2MB
5/30/2007
Adobe DNG Converter and Camera Raw 4.1 update

Photoshop Elements 7 Editor crashes upon opening any image

I have been trying for 2 days to get my Photoshop to work.
I've used PSE7 for years, no issues. Suddenly yesterday, every time I try to open an image in the full editor, I get the "Photoshop has stopped working... check online for a solution or close the program" message.
I tried uninstalling and reinstalling PSE7, rebooting, as well as plenty of other fixes I found on here. Nothing has worked.
I'm on Windows Vista 64 bit.
I tried to call Adobe customer support ALL DAY, since 9am. Between hours of hold time, being told I have to leave a call back number that never gets called back, and getting hung up on by the rudest customer service rep in the history of the world, I am at the end of my rope.
I'm a professional photographer and graphic designer, and I've now lost 2 full days of work time and cannot get a single answer on forums or help on the phone from Adobe. I'm seriously losing it.
Can someone please help me figure out what happened to the program I was perfectly and completely happy with for years so I can get some work done?
Thanks,
Maggie

This FAQ has several troubleshooting suggestions:
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Troubleshooting_Editor_cra shes
Ken

Feature Request: Option to Load Master in External Editor

Right now, if I want to edit a file in an external editor, Aperture makes a version first. While I understand the design reasoning, I need to override this behavior in two specific cases:
First, sometimes I want to use Adobe Camera Raw to process a RAW file. Aperture should allow me to do this directly from the application without exporting the master and loading it from the Finder.
Second, and this is more important for me, I'd like Aperture to send original layered PSD files as imported back to Photoshop for editing. Aperture will import my layered PSD files without difficulty. If I export the master, I get the original file. But if I try to open it in an external editor (Photoshop) from Aperture, Aperture makes a flattened intermediate version. That's not what I want - and it destroys my non-destructive workflow by flattening all my layers in Photoshop. What I'd like is an option to have Aperture send the master layered PSD file to Photoshop, allow me to edit it, and perhaps save the changes back in Aperture as modifications to the original layered PSD file.
There's an interesting semantic issue. "Non-destructive" is more than just not touching the original files. It's allowing for a workflow which can be rolled back to previous states. My work in Photoshop uses layers, masks, adjustments, and channels to achieve this. I need Aperture to allow me to keep using Photoshop in a non-destructive way, while enabling me to edit my RAWs and other flattened files in the powerful ways that Aperture offers.

Managing layered PSD files in Aperture
For those who absolutely must manage layered PSD files in Aperture, here is the way to do it...
1- In your original PSD file, HIDE ALL LAYERS above the background layer
2- IMPORT this PSD file into Aperture
3- CREATE A VERSION in Aperture by choosing to edit externally in Photoshop.
4- Back in Photoshop OPEN THE ORIGINAL PSD file along with the new version
5- LINK all the LAYERS in the original PSD file and DRAG them TO the new VERSION (holding the shift key down so they pin register)
6- SAVE the new version in Photoshop
7- Back in Aperture your version is now an exact layered copy of your original which will not flatten when reopened from Aperture into Photoshop.
Obviously this process will be rather tedious if you need to deal with hundreds of layered PSD files, but if you are in that situation that implies you already have a workflow and a storage strategy that works well for you. So why change, especially to Aperture?
Adobe Bridge or Media Pro or Portfolio are the obvious programs for you !
Dual 2ghz G5 Mac OS X (10.4.3)

Editors

Similar Messages

Maybe you are looking for