Error opening a transaction in Logic Editor

Hi,
Using 11.5 SR3.
I have a transaction which some 20 sequences and 30 action blocks. I configured it as a listener. For some strange reason, I just cannot open the transaction in the Logic editor.
Another issue, though not sure if its related to the same thing is that some of the transactions say 'executing' even though the last sequence in the transaction is executed (the last sequence is a file write and the file is already created) when running from the Logic Editor. I also feel that the performance of the transaction execution has gone down recently. Not sure if all these issues are related or each one is a separate issue.
Any clues from the gurus?
Ravi.

Hi Ravi,
Found a SAP Note on the transaction loading issue.
Note: 960362
Title: Large Transactions can crash server
URL: [Click Here|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_xap/~form/handler]
It mentions increasing the heap size as an option.
Cheers,
Jai.
Edited by: Jai Tamhane on Feb 7, 2008 12:23 PM

Similar Messages

Error while executing transaction in logic editor

Hi all,
When i try to execute a transaction in logic editor in my system i get the following error.
[DEBUG]: Transaction Complete.
[ERROR]: Error executing transaction Status (403):ok
But when i try to exectue the same in a different system,the transaction is sucessfully executed.could anyone help me out with is issue!

U better try to clear the cache enteries and try this.it may help

Error in Logic Editor

Hi,
I want to create transactions using Logic editor of SAP xMII.
Whenever i click on 'Link' option it gives error saying 'Exception has been occured'
null.
Same is case when i work on existing transacttions.
Can anyone please help me in resolving this.
Thanks in advance
Regards,
Shalaka

Shalaka,
Can you please confirm the version of xMII you are using? Also, can you tell me which version of the Sun JDK you are running on both the xMII server and the workstation you are working with the Logic Editor?
Regards,
Michael Teti

Business Logic Editor with Complex Transasctions

I'm starting to have some serious problems using the Business Logic Editor with reasonably large (but by no means huge) transactions. These transactions also have nested transaction calls down a few layers. The main symptoms are:
1) When opening the Link Editor on the first action it is somewhat sluggish. Opening the Link Editor on the last action can take over 60 seconds.
2) If adding a new Transaction Call action, selecting the called transaction in the Configure window doesn't work. The transaction can be selected OK, but the browse window will not close. It has to be cancelled. The Link Editor does not show the transaction's input, even though the Configure window will now show the selected transaction's path OK.
3) If the transaction is Saved after 2), that transaction will not open again in the Logic Editor, even after a reboot.
Memory seems to be part of the formula. The above is on a notebook with 1Gb of RAM. On a dual core with 2 Gb, the problems are less, but not much. On a server with 8Gb, the symptoms disappear.
Does anyone know if there is a recommended minimum system config for using the Logic Editor?
What is actually happening when a transaction with nested Transaction Call actions is loaded in the Editor and for exection? I have many transactions that don't have the above problems, but they take a long time to open in the Logic Editor, and up to 1.5 seconds to load when executing the transaction (this is as per the F5 timings).
Thanks,
Bill

Rick,
These days I'm very careful about large embedded reference docs in my transactions. I actually go through the .trx files with notebook looking for any large chunks of that sort of XML and make sure they are eliminated.
In the case of this transaction, by the time I get to the actual SQL query action (and remember it's a few layers of nested transaction calls down), it can't run the query anyway. The Query Template name in the configure window is blank. That and any params are set dynamically in Links at run time (the Query Template name actually comes from a config file). If I try Limit Rowcount or Yes when I close the configure window, it just gives an error because it has no idea what query template to run.
Given this, the problem just doesn't seem related to fetching data. And how would this cause the Links window to take so long to open in the Logic Editor?
Bill

Error while calling BAPI in BLS(Logic Editor)

Hi all,
I am using a RFC(BAPI_OBJCL_CHANGE) in XMLL logic editor. I have configured in SAP JCO interface. While executing that transaction, it shows error like ACTION FAILED: End Action SAPJCOInterface_0 : (SAP JCO Interface). But, when I try with other BAPI's its working fine. At the same time when I execute the RFC(BAPI_OBJCL_CHANGE) in SAP logon its working fine. What could be the problem?
Help in this regard, it's urgent.
Thanks & Regards,
Hemalatha

Did you try to execute the BAPI from SAP in BAPI Explorer? If you are not familiar with the behavior of a particular BAPI, that is a good place to do testing. By using BAPI Explorer, you have bypassed any impact xMII may have on the execution of the BAPI.
Once you have the parameters set correctly there and the BAPI executes without error, then try it in xMII. A couple of other things to keep in mind. SAP often adds leading zeroes to various ID's (material, production order, batch, etc.). BAPI's often do not. So make sure you know the configuration of the object and check to make sure you have leading zeroes where appropriate.
Hope this helps,
Mike
Also make sure you check the Automatically Commit Transaction since you are performing an action upon SAP rather than simply retrieving information.
Edited by: Michael Appleby on Feb 11, 2008 4:17 PM

Error while opening a datafile in dataprep editor

Hi
Error while opening a datafile in dataprep editor
"opening the datafile failed see the message panel for details"
"server.com.DEV.Perf Read data file September 17, 2009 8:31:51 AM EDT Failed : 1030001"
can anyone help me through this error..
right i am trying to load data by creating a rules file..but could not open the file in dataprep editor..
Thanks,
Ram

In some cases restarting the EAS service has fixed this error for me.

Having installed an upgrade for Photoshop Elements 13, I cannot open the application. I get an error message saying "Adobe Photoshop Elements Editor cannot be opened because of a problem. Check with the developer to make sure Adobe Photoshop Elements Edit

Having installed an upgrade for Photoshop Elements 13, I cannot open the application. I get an error message saying "Adobe Photoshop Elements Editor cannot be opened because of a problem. Check with the developer to make sure Adobe Photoshop Elements Editor works with this version of OS X. You may need to reinstall the application. Be sure to install any available updates for the application and OS X".
I have since uninstalled and reinstalled the app, but get the same error message.

Which version of OS X do you have? It's not clear from your post whether "installed an upgrade" means you just installed PSE 13 as an upgrade or you installed an update to PSE 13, like ACR 9 or 13.1. Please clarify.

Runtime Error while opening the transaction ME22N

Hi,
when am trying to open the transaction ME22Nin Ecc6.0 its showing the runtime error like Assign with Length 0 in the pgm SAPLTAX1 in the Module FIND_TAX_SPREADSHEET.
than you in advance.

post your Dump information with
Short text
What happened?

Error When Opening the Transactions/Transactions Window

Hi All,
in Oracle E-Business Suite R12 Version
Error When Opening the Transactions/Transactions Window
ORA-06502: PL/SQL: numeric or value error
ORA-06512: at "APPS.AR_MO_GLOBAL_CACHE", line 55
ORA-06512: at "APPS.ARP_STANDARD", line 2912
ORA-06512: at "APPS.ARP_GLOBAL", line 282
FRM-40735: PRE-FORM trigger raised unhandled exception ORA-06502
Can any body help about the error
Thanks in advance.

Did you go through the below notes:
Note:125204.1, Note:153207.1 and Note:191306.1.

[not solved] Error opening the editor - assertion failed

Hello everyone,
I began a project under Linux with Eclise and Flex builder alpha build 3.0.204732.
Everything's going fine under Linux but then, I wanted to access my project from Windows using Flex builder 3.0.2.214193.
If I do that, I receive the error: "Error opening the editor. Reason: Assertion Failed:"
Could you help me?
Thanks a lot

up

Error opening editor for file

When I'm opening files via a SFTP connection the file opens; however, I get a somewhat annoying "Error opening editor for file c:\users\[user]\AppData\Local\Temp\[connection]\[folder]\(SFTP)[file]"
I can't figure out why!
Any ideas?

you should use "<xsl:include href" instead of "<xsl:import href"
Regds
--

I have Elements 12 installed. When I am in the catalog, click on a photo, then want to open the Editor, I get an error message. If I click on Editor from the Welcome screen, I get the same error message. Why doesn't Editor work? Thanks.

I have Elements 12 installed. When I am in the catalog, click on a photo, then want to open the Editor, I get an error message. If I click on Editor from the Welcome screen, I get the same error message. Why doesn't Editor work? Thanks.

You'd better ask in the Elements forum.
Photoshop Elements

Error opening an opportunity / transaction

Hi Experts,
I have a trouble when i Want to open a opportunity. I have done a Multi creation of opportunities with the BAPI_OPPORTUNITY_CREATEMULTI
Now when i go to CRMD_ORDER and I try to open one of these opportunities charged, i have the error: "Transaction with the transaction number 'xxxxxxxx' is not available or archived. Message no. CRM_ORDERADM_H012
If i try to open the transaction in UI i have the same error.
Please help us,
Thanks in advance.
Regards.

Hi,
In the SAP GUI, the Opportunity is retrieved through the One Order API - CRM_ORDER_READ. So, my guess is that, before the call is made to this Function Module, we have to append the Transaction ID field with a wild card character like *. As the underlying Data Element is a Character field, it will behave in Searching of a Character field. But, we have to check this approach.
I have a couple of doubts. Can you debug the CRM_ORDER_READ Function Module and have a look what exactly is getting filled in the field Transaction ID. As the Web Client UI uses the Search Framework, we can compare the behavior of retrieving the data.
Hope this helps.
Thanks,
Samantak.

PDF Generation Error in Logic Editor

Hi all,
I have a small problem with my Logic Editor. While trying to generate Documentation (File --> Generate Documentation) , i am getting a message as
<b>"This action requries installation of certain PDF librabries. Please contact support for more information"</b>
Can someone please tell me :
1. where i can get this PDF libraries
2. where should i install this?
Thanks in Advance
Muzammil P.T

Here is the direct link:
http://<<ServerName>>/LighthammerCMS/Help/Getting_Started/InstallationGuide.htm#Installing_the_iText_Library

User Defined Transaction in Logical Data Service

Hi
I have few physical data services created from database store procedures. I've corresponding logical services for each of the physical data services.
Now I've created a logical data service that calls 2 store procedures & trying to update this 2 store procs in a single transaction.
Also I dont have a read operation in my logical data services. In this case both store proc. should take part in a single transaction & should commit or rollback as per success/failure.
I tried testing this scenario & it fails. ALDSP was able to update first store proc. but there was an error in second store proc. so it should have rollback the entire transaction.
Is there any way that we can have user defined transaction in logical data service?
My Scenario:
InsertData(RequestA,RequestB) as response
res1 := call First Store Proc (RequestA) ;
res2 := call Second Store Proc (RequestB);
response := res1 + res2
So my question was is it possible to define user transaction before making calls & have commit/rollback define around it.
Apprecaite for your help!
Thanks
Pash

I have assumed that you realize you need XA drivers for this. What is the exception you see? Something about "mixed outcome"?
But in the case of store procedure, we cant drag & drop physical ds into logical ds. Why?Since your stored procedure updates, it should be defined in the physical ds as a "procedure" not a "function" - it sounds like it is. (procedure means it will update, function means it will not - not that it is a "stored procedure"). Because it updates it cannot be called by an xquery function because xquery is by definition read-only. It can only be called directly from the client, or from another procedure (which is XQSE, not Xquery). If you created a logical ds with a "procedure" - you could drop your procedure into that.
created a new library procedure in which i am calling 2 physical ds assuming it will be executed in a single transaction. But it does not. Please verify.
But it does not. Please verify.I won't verify it because it is not correct. It should be treated as though it is one transaction. And barring the bugs with JNDI/data source names and multi-data sources, I do not know how how it would not be. So either there is a misunderstanding or a new bug.
Either way you need to open a case with customer support to resolve this. When you open your case, the more information you provide them with (i.e the smallest possible dataspace that will reproduce the problem along with DML to create the stored procedures and the tables that they use, and also any/all exceptions/stack traces and server logs).
- Mike
ps. there are no means to explicitly create a transaction in ODSI.

Error opening a transaction in Logic Editor

Similar Messages

Maybe you are looking for