EDMSG Table has no message type

Hi Gurus
I am doing ALE config for SAP AFS to PI system. While making Partner Profile in PI7.0 system i am not able to define
Messge type ex: J3MAT, ORDERS etc. because system saying Message types are not presnt in EDMSG Table. This is cross client table i can't make any entry ..Create Entry option is disable.
Please help how do i get Message type in thise table.
Regards
Subham

Hi Subham,
The IDoc message types are stored in table EDMSG. Defining the message type can be done from the transaction WE81.
Update
Also check http://logosworld.de/logos/cookbook/cb10_idoc_03_firstlook/idoc_90_misc/idocsale.htm
Regards
Suraj

Similar Messages

How to dump table to the flat file, if the table has NVARCHAR data type fie

I need to dump the table to the text file. The table has NVARCHAR data type field and simple select * from table_name does not work. What do I have to do? Do I need convert NVARCHAR to VARCHAR and if yes, then how?
Thanks,
Oleg

I need to dump the table to the text file. The table has NVARCHAR data type field and simple select * from table_name does not work. What do I have to do? Do I need convert NVARCHAR to VARCHAR and if yes, then how?
Thanks,
Oleg

Variable initialized with wrong message type

Hi,
I have a BPEL process variableA of Message type A as defined in the partnerlink WSDL file. This variable get initialized during operation A from the partnerlink. The WSDL has another message type B defined for another operation B.
During runtime when operation A is called variable A gets initialized with message type A, however when operation B is invoked with mesage type B variableA gets initialized again with the content of message type B even though it's defined to be of message type A. Below are the snippets from the WSDL and BPEL process file
WSDL file ..
<message name="MessageTypeA">
<part name="payload" element="mpx:MessageARequest"/>
</message>
<message name="MessageTypeB">
<part name="payload" element="mpx:MessageBRequest"/>
</message>
<portType name="MutilPort">
<operation name="A">
<input message="tns:MessageTypeA"/>
</operation>
<operation name="BA">
<input message="tns:MessageTypeB"/>
</operation>
</portType>
Process BPEL file
<variable name="VariableA"
messageType="tns1:MessageTypeA"/>
<variable name="VariableB"
messageType="tns1:MessageTypeB"/>
<pick name="Pick_2" createInstance="yes">
<onMessage portType="tns1:MutilPort" operation="square"
variable="VariableA" partnerLink="Multiplex">
<sequence name="Sequence_1">
<assign name="Assign_2">
<copy>
<from variable="VariableA" part="payload"
query="/ns1:MessageARequest/ns1:Operand1"/>
<to variable="ResponseVariable" part="payload"
query="/ns1:AllOpProcessResponse/ns1:Result1"/>
</copy>
</assign>
</sequence>
</onMessage>
<onMessage portType="tns1:MutilPort" operation="addition"
variable="VariableB" partnerLink="Multiplex">
<sequence name="Sequence_2">
<assign name="Assign_1">
<copy>
<from variable="VariableB" part="payload"
query="/ns1:MessageBRequest/ns1:Operand5"/>
<to variable="ResponseVariable" part="payload"
query="/ns1:AllOpProcessResponse/ns1:Result1"/>
</copy>
</assign>
</sequence>
</onMessage>
</pick>
Please can anyone shed some light on why and how this can happen and where is it going wrong.
Thanks,
Shishir

Looks like the destination which is used by your EG has default settings,
particulary the RedeliveryLimit param. If it is set to -1 (default setting)
WL will try to redeliver the message forever in case of any error. Just set
it to something else. You can also specify an ErrorDestination and hadle
error messages specifically in it.
Denis.
<Gunjan Shukla> wrote in message news:[email protected]..
Hi,
We are using WLI 8.1, in one of our applications I have a message broker
channel configured to listen to rawdata type messages. A jms event
generator is configured to publish messages, which are sent to a jms
topic, on this channel.
We have no control over type of messages sent by client applications, when
some client application sends an ObjectMessage instead of BytesMessage,
following error is thrown
####<Jun 1, 2006 10:47:14 AM GMT-07:00> <Error> <WLW> <P931467> <cgServer>
<ExecuteThread: '11' for queue: 'weblogic.kernel.Default'> <<anonymous>>
<BEA1-004324CB0C4F26C12C0A> <000000> <Cannot publish non-BytesMessage to
channel of type RAWDATA>
####<Jun 1, 2006 10:47:14 AM GMT-07:00> <Error> <WLI-Core> <P931467>
<cgServer> <ExecuteThread: '11' for queue: 'weblogic.kernel.Default'>
<<anonymous>> <BEA1-004324CB0C4F26C12C0A> <BEA-489048> <Not a
BytesMessage>
server keeps throwing this exception and fills the logs and ultimately
server needs to be re-started.
Can somebody point me to whether its possible to catch these exceptions in
a process?
Or alternatively is it possible to somehow ignore the messages with
mismatched message type?
Any ideas are greatly appreciated.
Thanks and regards,
Gunjan

Message Types for respective Modules

Hello All,
Could you please let me know how we can determine the message type and idoc types for respective Modules based ont the description. Example FICO i.e. Invoice or etc.
Thank you.
Regards,
Dinesh

Hi,
Thanks for ur reply. But i have descriptions stating "SAP Inbound Inventory Transfer" and required specification to be implemented is "Plan to Fulfill.Inventory transfer with in the plant". In this case, which idoc must be used. I have checked in the tables earlier different message types.
Regards,
dinesh

One source File should be sent to Receivers based on Message type

Hi All,
I am facing with a problem, the scenario is File to IDOC...
The file which comes has different message types if Message type is VERIFY then IDOC <b>_-AFS_-DELVRY03</b> has to be triggered and if Message type is MIGO101 then IDOC <b>_-AFS_-WMMBID02</b> has to be triggered,
Source message is same for both the idocs and mapping is different...
SO please any one can suggest how to proceed in Integration Directory configuration...
Thanks and Regards,
sridhar

Hi,
Your query is a little ambiguous.
You say, that the message type can be either VERIFY or MIGO101.
You also say that the source message is same for both the idocs. This is not very clear.
In case, you have the same message type, and VERIFY and MIGO101 are two fields/segments in this message type, then all you need to do is check if these segments exist, in interface determination.
Click the + symbol in the inbound interfaces section.Enter the following:
Condition: MT/VERIFY ex If so, call IMapping which maps message to idoc AFS_-DELVRY03. Inbound interface for this would be idoc AFS_-DELVRY03
Condition: MT/MIGO101 ex If so, call IMapping which maps message to idoc -AFS-WMMBID02. Inbound interface for this would be idoc. -AFS-WMMBID02.
In case you have two different message types(which means you have two different source messages), you could create two different scenarios.
Regards,
Smitha.

Multiple message types for an idoc type

Hi all,
I created one custom idoc type with six segments. I heard that one idoc type can have any number of message types
if it is so pls tell me how to assign these two message types for my idoc .
i want to create multiple message types because i want to send same idoc type to diff legacy systems.
My requirement is message type one is only for first three segments and message type two is for another three segments .
The outbound program 1 for mess type 1 should fill fill the data for only first three segments and second outbound program corresponding to mess type 2 should fill the data for last three segments
how should i design for my requirement. suppose if the idoc has two message types then it has two outbound programs?

Hi Kunal,
Below are my thoughts from a design perspective,
My requirement is message type one is only for first three segments and message type two is for another three segments .
The outbound program 1 for mess type 1 should fill fill the data for only first three segments and second outbound program corresponding to mess type 2 should fill the data for last three segments
Before you look upon the no. of message types you need, i guess you need to look at the business requirement. Per your requirement you want to send send two sub sets of data. The first subset in the first 3 segments and other three segments for the second subset of data.
Is the structure of the first subset of data similar to the second subset If not, better to create two IDOC Types. If they are similar, then create one IDOC Type with three segments and have two message types for each subset of data.
For Ex: ORDERS05 is the IDOC type for Orders, this IDOC type provides capability to carry data related to any type of orders
but the action on the data is facilitated by the message type like ORDERS for create, ORDCHG for change, ORDRSP for Order response etc.
OR
Are these two subsets of data related to each other, if yes understand the relation? If not related at all then you might be better of creating two separate IDOC Types.
Like in the above example A purchase order is related to a sales order so you can use the same IDOC type, but in case of a order response and ASN that data sent is different and hence you will need different IDOC types (even though a SO is related to a DN).
how should i design for my requirement. suppose if the idoc has two message types then it has two outbound programs?
The above again depends on the how tightly/loosely coupled are the data sets, you can have just one program and have a simple case statement on the message types or have two different programs.
You will also have to consider points like, if any of the subsets is more prone to more change in terms of the structure and associated business logic. If yes, then you might want to keep the programs separate to reduce work on regression testing etc.
I am sure you will receive more inputs from the experts on the forum and the list of points to look for will get longer , so understand the requirement, dependencies and if you have any specific questions you could post it on the forum.
Regards,
Chen

Idocs multiple message types

Hi all,
I created one custom idoc type with six segments. I heard that one idoc type can have any number of message types
if it is so pls tell me how to assign these two message types for my idoc .
i want to create multiple message types because i want to send same idoc type to diff legacy systems.
My requirement is message type one is only for first three segments and message type two is for another three segments .
The outbound program 1 for mess type 1 should fill fill the data for only first three segments and second outbound program corresponding to mess type 2 should fill the data for last three segments
how should i design for my requirement. suppose if the idoc has two message types then it has two outbound programs?
Edited by: kunal kakkar on May 16, 2011 10:21 AM
Moderator message: duplicate post locked.
Edited by: Thomas Zloch on May 16, 2011 12:39 PM

COND_A01 is the IDoc to distribute the condition master data. Sales order (ORDERS05) is transactional data. It is not feasible to generate a master data IDoc from a sales document. Even if it was feasible, what would be the purpose? The master data hasn't changed, why would anyone want to send it again with every order?

Need to make a copy/clone of a table which has sdo_geometry data type

Folks,
We are running Oracle 11gr1 on Suse Linux platform.
We have a requirement, where we need to make a copy of a table, in the same database but in a difference schema, the source table has about 130 millions rows and also has the sdo_getometry data type.
I tried materialized view, but MV does not support sdo_geometry data type.
According to one of my DBAs, doing it via data pump , will take few days, which is not acceptable.
Is there a way, we can make a copy of this table in the same db ?
Thanks
Ashish

Siva,
This is not for backup purpose.
Here is the background information on this requirement.
I need to have a static copy of a table, which has spatial column, sdo_geometry in it.
So we can run another application against this table, just read-only, since we need static data, data in the source table changes quite often.
One of my DBA suggested to have another instance/database, to keep the copy of the source table, I thought idea of having another database just to keep a copy of a table is an over kill.
That is why I had asked this question and you had provided a viable solution.
Then we need to refresh this table , with the data (changes) from the source table, maybe once in 2- 3 weeks.
I tried creating a Materialized view, but it does not support Spatial columns.
So now I am trying to figure out, the most efficient way to refresh the clone table from the source table.
Regards,
Ashish

In which table cound i find the info on EDI standard Message type??

Example
EDI standard Message type Business process
EDIFACT ORDERS Purchase order
INVOIC Invoice
ANSI X12 850 Purchase order
810 Invoice
Like those 850..810..etc info, i dont know from which table could i find the related info?
Thanks.

Hi Hoo,
Electronic Data Interchange (or EDI) refers to the use of computers in formatting and exchanging business information using internationally recognized standards and formats. Standards organizations throughout the world have defined hundreds of document types to create a universal language for companies to conduct business while using dissimilar systems and processes. Common business documents, such as the invoice, purchase order, production planning schedule, ship manifest, and customs declaration, have been standardized and are sent and received electronically over private secure networks (Value-Added Networks - VANs) and the Internet.
So EDI is not an SAP product, It is a method to exchange the data over internet.
You dont get any information in any table in SAP. SAP supports EDI to exchange the data over internet. There are no. of third party EDI tools to connect to SAP.
following is link to know more about EDI message types.
http://www.edifactory.de/messages.php?s=D96A

Distribution Model (ALE) - Message type has to be deleted from model view

Hello,
I want to delete a message type from an existing model view in the distribution model (of the maintenance system).
But when I mark the concerning message type and press Edit->Delete the message 'Action cannot be carried out on the nodes selected' occures. Deleting the complete model view would work...
Does anyone know how I can get this without setting up a new model view?
Many thanks in advance,
Juergen

hi,
>>'Action cannot be carried out on the nodes selected'
you get this message if you try to delete a message type
from a model view that was not created on your system
(it has been replicated and it's maintained on another system)
so you can only delete this message type on the system that has
"master" distribution model
if it's not master then it's usually grey and you can only delete if it's black in change mode
>Deleting the complete model view would work...
if you try that you will see info that it's not the "master" system for this model
check it and let me know
Regards,
Michal Krawczyk

I want the message types and basic types for catsdb table

i want the message types and basic types for catsdb table

Hi Jagrut,
Message Class is "LR".
<b>Reward points, if helpful.</b>
Regards,
Atin

"Error:The search cannot be executed because the table has pending changes that would be lost", after DELETE

Good day,
On Search Page, I have searched for the record(s) then deleted a record and got confirmation message i.e. Record has deleted. Next when I search for any record I'm getting below error.
Error
The search cannot be executed because the table has pending changes that would be lost.
Could you please help me to fix this issue. Your response is highly appreciated.
Item properties:
Item Style : Image
Action Type: Fire Action
Event : delete
Below is the code using in CO and AM
Controller (processFormRequest):
if ("delete".equals(pageContext.getParameter(EVENT_PARAM)))
          // The user has clicked a "Delete" icon so we want to display a "Warning"
          // dialog asking if she really wants to delete the employee. Note that we
          // configure the dialog so that pressing the "Yes" button submits to
          // this page so we can handle the action in this processFormRequest( ) method.
          String visit_id = pageContext.getParameter("visit_id");
          String employeeName = pageContext.getParameter("last_name") + ", " + pageContext.getParameter("first_name");
          MessageToken[] tokens = { new MessageToken("EMP_NAME", employeeName)};
          OAException mainMessage = new OAException("FND", "XXXX_EMP_DELETE_WARN", tokens);
          // Note that even though we're going to make our Yes/No buttons submit a
          // form, we still need some non-null value in the constructor's Yes/No
          // URL parameters for the buttons to render, so we just pass empty
          // Strings for this.
          OADialogPage dialogPage = new OADialogPage(OAException.WARNING,
            mainMessage, null, "", "");
          // Always use Message Dictionary for any Strings you want to display.
          String yes = pageContext.getMessage("AK", "FWK_TBX_T_YES", null);
          String no = pageContext.getMessage("AK", "FWK_TBX_T_NO", null);
          // We set this value so the code that handles this button press is
          // descriptive.
dialogPage.setOkButtonItemName("DeleteYesButton");
          // The following configures the Yes/No buttons to be submit buttons,
          // and makes sure that we handle the form submit in the originating
          // page (the "Employee" summary) so we can handle the "Yes"
          // button selection in this controller.
dialogPage.setOkButtonToPost(true);
dialogPage.setNoButtonToPost(true);
dialogPage.setPostToCallingPage(true);
          // Now set our Yes/No labels instead of the default OK/Cancel.
dialogPage.setOkButtonLabel(yes);
dialogPage.setNoButtonLabel(no);
          // We need to keep hold of the employeeNumber and employeeName.
          // The OADialogPage gives us a convenient means
          // of doing this. Note that the use of the Hashtable is
          // most appropriate for passing multiple parameters. See the OADialogPage
          // javadoc for an alternative when dealing with a single parameter.
          java.util.Hashtable formParams = new java.util.Hashtable(1);
formParams.put("visit_id", visit_id);
formParams.put("empName", employeeName);
dialogPage.setFormParameters(formParams);
          pageContext.redirectToDialogPage(dialogPage);
    else if (pageContext.getParameter("DeleteYesButton") != null)
          // User has confirmed that she wants to delete this employee.
          // Invoke a method on the AM to set the current row in the VO and
          // call remove() on this row.
          String employeeNumber = pageContext.getParameter("visit_id");
          String employeeName = pageContext.getParameter("empName");
          Serializable[] parameters = { employeeNumber };
         // OAApplicationModule am = pageContext.getApplicationModule(webBean);
am.invokeMethod("deleteEmployee", parameters);
          // Now, redisplay the page with a confirmation message at the top. Note
          // that the deleteEmployee() method in the AM commits, and our code
          // won't get this far if any exceptions are thrown.
          MessageToken[] tokens = { new MessageToken("EMP_NAME", employeeName) };
          OAException message = new OAException("FND",
            "XXXX_EMP_DELETE_CONFIRM", tokens, OAException.CONFIRMATION, null);
pageContext.putDialogMessage(message);
Application Module:
public void deleteEmployee(String visit_id)
        // First, we need to find the selected employee in our VO.
        // When we find it, we call remove( ) on the row which in turn
        // calls remove on the associated EmployeeEOImpl object.
        int empToDelete = Integer.parseInt(visit_id);
          OAViewObject vo = (OAViewObject)getNonEmployeesSummaryVO1();
    NonEmployeesSummaryVORowImpl row = null;
        // This tells us the number of rows that have been fetched in the
        // row set, and will not pull additional rows in like some of the
        // other "get count" methods.
       int fetchedRowCount = vo.getFetchedRowCount();
        // We use a separate iterator -- even though we could step through the
        // rows without it -- because we don't want to affect row currency.
        RowSetIterator deleteIter = vo.createRowSetIterator("deleteIter");
if (fetchedRowCount > 0)
          deleteIter.setRangeStart(0);
          deleteIter.setRangeSize(fetchedRowCount);
          for (int i = 0; i < fetchedRowCount; i++)
            row = (NonEmployeesSummaryVORowImpl)deleteIter.getRowAtRangeIndex(i);
            // For performance reasons, we generate ViewRowImpls for all
            // View Objects. When we need to obtain an attribute value,
            // we use the named accessors instead of a generic String lookup.
            // Number primaryKey = (Number)row.getAttribute("EmployeeId");
            Number primaryKey = row.getVisitId();
            if (primaryKey.compareTo(empToDelete) == 0)
              // This performs the actual delete.
              row.remove();
                getTransaction().commit();
              break; // only one possible selected row in this case
        // Always close the iterator when you're done.
        deleteIter.closeRowSetIterator();
      } // end deleteEmployee
Thanks,
Ravi

Hi
Check this link Getting error in search page search cannot be executed
Regards,
Dilip

EDI Message Type for Credit Memo inbound message

Hi Experts ,
We have ECC6.04.
We configured Incoming vendor invoice idoc ( Message Type - INVOIC, Basic type - INVOIC02) which is working fine. We also have Credir Memo incoming message ( Message Type - GSVERF , Basic type - GSVERF03 , Processing code- GSVE , FM-IDOC_INPUT_GSVERF_START and assigned this FM to Object Type- BUS2094)
I am using same IdoC in WE19 that of Invoice, which successfully posted and editing the BSART as CRME and entering the Messgae type GSVERF , but when I am posting it system is giving error
No record exists in T661W for vendor 2000001 , plant , unloading pointMessage no. V4032
Diagnosis
The system could not determine a sold-to party as no record has been specified in Table T661W for the displayed supplier, plant, and unloading point values.
System Response
IDOCS processing is terminated.
Procedure
Please create a record in Table T661W for the above values and restart the IDOCS planning from electronic mail.
and
EDI: Syntax error in IDoc (segment cannot be identified)Message no. E0078
Diagnosis
The segment E1EDK04 does not occur at the current level of the basic type GSVERF03 (extension ).
This error can have several reasons:
The segment E1EDK04 is assigned to a group whose header segment does not occur.
The segment E1EDK04 does not exist in the syntax description of the basic type GSVERF03 (extension ).
The sequence of segments in the group in which the segment appears is incorrect.
Previous errors ('mandatory' segment or group missing) may be due to this error.
Procedure
Please check the IDoc or the syntax description of the basic type GSVERF03 (extension ).
Th table T661W is for Vendor, partner decribtion, Sold to party, Unlaoding Point. So I am not getting whsy sold to part relevant table ssytem is asking to make entry ?
Can anyone please suggest/help me what is the problem and solution on this ?
Thanks
NAP

Hi ,
Currently we are using Message Type - GSVERF , Basic type - GSVERF03 , Processing code- GSVE , FM-IDOC_INPUT_GSVERF_START and assigned this FM to Object Type- BUS2094)..which is giving above error. I just found that process code GSVE is for Outbound message
Can any one suggest / confirm what should be exact Message Type , Basis Type, Process code and Funct. Module requiered for processing EDI inbound message in MM - Logistics Inv Varification ?
Thanks
NAP

Calc manager: @RETURN function with WARNING as message type issue

Hi Gurus,
I m working in version 11.1.2.2 in IE 9. I have created a simple calculation script as below to test the @Return essbase function.
function
FIX ( .....)
"502100"(
IF( ("YearTotal" > 50000))
@RETURN("True:test message" , WARNING);
ELSE
@RETURN("False:test message" , WARNING);
ENDIF
This script validates fine , however when executed on Save of Data Form gives a Job console error with no error code but message as below
Invalid network data. Type is matched but length is zero. An application protocol error might exist between server and client processes..
The same script executed using error message type as *"ERROR"* executes successfuly on save of data form and gives exepected custom error message.
I read a thread in forum saying the @Return function works only with ERROR as message type for vesrion 11.1.2.1
How to use Essbase @RETURN function to displayed messages in 11.1.2.1
I have tried using WARNING and INFO , both doesnt seem to work even in 11.1.2.2, Only ERROR as message type works.
Has anyone experienced the same with version 11.1.2.2 as well? Is this still a bug?
Please let me know your inputs.
Thanks
SN

Hi,
I am sorry for the late response!
Thank you for all your suggestions!
I had used in the followng way and it resolved my issue.
SELECT GUID_PRGEN "Primary Key as GUID in "RAW" Format
         GUID_PR     "Primary Key as GUID in "RAW" Format
         ATTR20A     "SUBSTANCE ID
         ATTR05A     "Materail Type
         ATTR10A     "Materail Group
         ATTR05B     "Sub-Family
         FROM /SAPSLL/PRGEN
         INTO TABLE T_PRGEN
         WHERE ATTR20A IN S_AT20A.
IF T_PRGEN IS INITIAL.
    MESSAGE : I007(ZMSSG) WITH 'Data not available for this entry'.
    STOP.
ENDIF.
Regards,
Kittu

What's the purpose of message type ADRMAS

Hello,
I want to distribute customer master data using message type DEBMAS. I read something about message type ADRMAS. Why should I also use type ADRMAS because DEBMAS already contains address data?
Regards, Jan

Hi,
you may look to notes [384462|https://service.sap.com/sap/support/notes/384462] and [306275|https://service.sap.com/sap/support/notes/306275].
In short.
Business Address Services (BAS) has defined a central point for handling and storing adress data.
Starting with ERP release 4.5B, customer/vendor master data has integrated the BAS functionality in order to provide a consolidated handling of address data instead of a specific handling.
As a result, KNA1, KNVK still contain address data for historical and compatibility reasons BUT the real accurate address handling is within BAS tables.
The second consequence is that the address is now distributed with its own idoc types : ADRMAS, ADR2MAS, ADR3MAS.
So for accuracy reasons, you should distribute ADRMAS AND DEBMAS.
Hope this helps
BR
Alain

EDMSG Table has no message type

Similar Messages

Maybe you are looking for