EEM version 2 and above on Cisco 12404/PRP and cisco WS-C4503 Sup V

Any one with an idea of which IOS versions or images on WS-C4503 switch and 12404/PRP routers support any EEM version 2.0 and above?

You would need 12.2(40)SG and IOS-XR 3.6 and higher to get EEM 2.x support on both of those platforms.
See https://supportforums.cisco.com/docs/DOC-8799 on how to determine the version of EEM on your platform.

Similar Messages

IOS and EEM Version...

I have a quick question if anyone may be able to help:
I have a 3845 running IOS 12.4(25b) [c3845-adventerprisek9-mz.124-25b.bin] and it does not support EEM 3.0. I have verified that commands such as "action 1 regexp..." or "action 1 if...", etc. fail. I have also attempted to check the EEM version using this page and it looks like it is only running EEM 2.1.
Cisco's page on EEM versions states that EEM 3.0 is available on IOS 12.4(22)T and higher. Am I mistaken in thinking that IOS 12.4(25b) should be high enough to have EEM 3.0 or higher included?
Thanks in advance for your responses!

Mr. Clarke,
Thank you for your quick answer. I was unfamiliar with the Technology train until now. I see now that an IOS upgrade will indeed be required--I just wanted to be sure before I submitted this answer to my team.
Thanks again.

Saving PDF for versions 4 and above

How can I save a document to be compatible with versions 4 and above of Acrobat?
FayeC

Assuming you have the proper version of Acrobat, you can use FILE>Reduce File Size or use the PDF Optimizer in another menu. Both of these allow saving in an earlier version. They may only be in Pro and only in a version newer than what you have.
A third option is to reprint the PDF with the AA4 compatibility selected. I think there is maybe a forth option in AA8.

Problem with save as option in version 10 or above

Hi,
I have created a pdf using pdfbox api which has links to go to a particular page in pdf. When a create a copy of this pdf using Save as option and open that copy pdf the links dont work in adobe reader versions 10 or above while they are working fine in older versions 8,9 etc. Can anybody help me why this is happening and hpw to resolve this issue.
Thanks,
kamal

Hi,
While saving the copy of created pdf in reader 10 or above, if i enable Save As optimizes for Fast web view links stop working else they are working fine. Can you help me with how to uncheck this option automatically. Please provide a solution as i have been looking for the resolution for last couple of weeks and need to resolve asap.
Thanks,
Kamal

How do I install Reader Version 8 and Version 11 on the same computer?

I have old fillable forms that will not work with the free reader above vesion 8. I also have programs that require the free reader version or above. I am trying to get both the free reader versions 8 and 11 on the same computer. When I installed version 11, version 8 was removed. When I tried to reinstall version 8 the message said I had a more up to date version and the install stopped. Any suggestions?

Thanks for the suggestion, it worked! What I had to do was after steps 1 & 2
3. move the entire Version 8 folder to a flash drive
4. reinstall Version 11
5. add a new folder called Adobe 8 to the program file directory
6. copy Version 8 folder from flash drive file to new folder
7. add shortcut to desktop.
Now I can open my old forms in Version 8 and edit and save them.
Thanks again.

How do I rid myself of the "english version" notice and subsequent block of opening iTunes on a new iTunes 10.6 update without altering my current iTunes folder?

I just updated iTunes to version 10.6 on my 10.6.8 OS X Mac Book Pro and am getting the old "english version" prompt.
This version of iTunes has not been correctly localized for this language. Please run the english version
Yes, that's right, I cannot open iTunes. When I attempt to open it a popup with the above-quoted text appears and the opening process terminates.
There were threads on this years ago as I recall and I've revisited them. They don't address the present question and I think those thread focused mainly on iTunes version 9 and/or earlier versions.
Steps taken thus far:
     I removed the iTunes app from the apps folder and deleted it.
     I have also re-downloaded iTunes 10.6.
     I have NOT yet attempted to re-install.
My question is: when I reinstall must I do anything with my ~/Music/iTunes folder to protect its contents from the install process? Or can I leave it alone and just re-install the app without suffering any overwrite or screwups of the ~/Music/iTunes folder or anything therein?
Notes: installed from an English language computer set to English language and inside the continental US.
Already deleted the app file from the Applications folder.

Solved my own problem.
For the record, fixing iTunes without moving or copying the ~/Music/iTunes folder can be done if you have your iTunes.app file backed up with Time Machine.
Just delete the newly installed iTunes.app file and then restore the iTunes.app file that existed before the update that borked the install.
That's it. iTunes opened right back up and accessed my old data like nothing ever happened. No moving or copying of hundreds of gigabytes of music data needed.

Acrobat Version Type And Version Number, For Creative Suite 5 (5.0) / CS5 For Windows

I would like to know the version type and pricise version number for Acrobat that is supplied with Creative Suite 5 (5.0) for Windows Retail Version. (This is the default version number, before any updates) :
To summarise:
For the product:
Platform: Windows
Suite: Creative Suite 5 (CS5) / 5.0
Distribution: Retail
Application: Acrobat
I require:
Version Type: Standard / Pro / Extended
Version Number (Precise): 9.0 / 9.3 / 9.3.2 / (or other)
Disc's Volume Label: (As shown in Windows Explorer)
Ideally this would be found by looking at Acrobat's HELP > ABOUT menu option. (From a Windows installtion of CS5, that has NOT been updated), and not just looking at what is printed on the disc label.
More replies of the above information, will confirm any information provided in replies.

Hello
there are two ways i can suggest:
First your own account: https://www.adobe.com/account.html and
Second the general informations there: http://helpx.adobe.com/x-productkb/global/find-serial-number.html
Helpful woud be http://helpx.adobe.com/contact.html
And what concerns Amazon: this "serial number" obtained from Amazon is not a serial number, only a code with which you can request a serial number from Adobe. Here you have to go through "Adobe Store", and look for the button "Serial Number Request". Fill in the form and, after a while you will get a "real" serial number.
Hans-Günter

Version 6 and 8 on Mac 10.6.3

I want to use both PSE Version 6 and Version 8 on SL 10.6.3. I presently have 8 working fine from disk, but cannot reinstall version 6 from the original disk. Intel Mac. Any ideas? Thanks.

Barbara, I must apologize for not having good recall.
Yes, it is installed or I think it is installed because it took about 20 minutes on my Intel, and the button indicated Done. Also, I find it in my applications folder.
After that, I did a Repair permissions and it gave a msg: Permissions differ on "usr/share/derby", should be drwxr-xr-x, they are Irwxr-xr-x.
Repaired "usr/share/derby".
Warning: SUID file "System/Library/CoreS ... as (sic) been modified and will not be repaired.
Permissions repair complete.
Then I went to the applications folder, clicked on PSE 6, and after 5 seconds I saw a blue disk showing a camera and PSE 6. After another 5 seconds I got a window:
Photoshop Elements quit unexpectedly.
Click Reopen to open the application again. Click Report to see more detailed information and send a report to Apple. (Followed by three buttons: Ignore, Report..., and Reopen).
Reopen just puts me back into the loop.
I sure hope that this is clear now. Just to recap, I originally had V6 installed, and I then installed V8. This time I did the reverse. And, the thing that got me into this mess is that I was using V8 and tried to open V6 when I got the quit msg that is cited above.
Thanks again. Fred

Safari tells me I have flash version 0, and it's just not true

I have a website (that someone else created for me. I know nothing of web design)It was created in flash v5. Until very recently I have had no problem viewing it on this computer using Safari, or any other browser for that matter.
Now, when I try to open the site, I get a prompt that states:
'You are using flash version 0
This website is optimized to run on Flash version 5 or above
Click here to download flash v 6'
I show that I have flash v9 installed. And, I am able to view my web site on other computers.
Any ideas as to what the problem may be?
Thanks,
Peter

Hi,
I get the same error message using Firefox on Linux. As Klaus says below, the website needs to correct their site to work across different platforms.

HT201210 I have error code -43 when trying to upgrade iPhone 3GS running v4.3 to version 5 or above. This error occurs whilst trying to back up phone during upgrade process. 2GB of free memory on phone. Can anyone help?

I have error code -43 when trying to upgrade iPhone 3GS running v4.3 to version 5 or above. This error occurs whilst trying to back up phone during upgrade process. 2GB of free memory on phone. Can anyone help?

Well I spoke too soon.
The update was successful, but now I cannot connect to the 3GS data network.
Cannot get email and cannot open a page in Safari.
+"Safari could not open the page because the server stopped responding."+
+"Cannot Get Mail+
+THe mail server is not responding. Verify that you have entered the correct account info in Mail settings."+
Email and internet work fine on WiFi.........no data using 3GS network.
Looks like I will have to revert back to old OS.

How do I update safari to version 6 or above

I could not access a website and was advised to update safari to version 6 or above or download google chrome any suggestions?

There are 3 different versions of Safari and each is a part of OS X.
Snow Leopard uses version 5.1. Mavericks uses version 7.1. To update your version you must update your version of OS X.

AddOnRegDataGen.exe of version 2004 and 2005

Dear Experts/Gurus,
Are there any differences between AddOnRegDataGen.exe of version 2004 and 2005 especially for add-on developed
by partner or customer ? if yes, what should I do to my add-on ? I just did the following steps:
1. Recompile the add-on after put identifier string generated using add-on identifier generator in SBO 2005A
2. Creating registration file using AddOnRegDataGen.exe of version 2005 after created installer
3. Regiter the add-on using add-on administration
Did I miss something beside the above steps ? because the add-on can not run in the SBO 2005. The add-on is developed using SDK SBO 2004A. I appreciate your answers. TIA
Rgds,

Hi Steve,
Some new fields were added between versions 2004 and 2005. But if you open the AddOnRegDataGen.exe window you will be able to see if something is not filled in your addon.
Where are you having problems? While installing or when trying to run your addon? What is the error message?
The steps you did are right:
1. Recompile addon with 2005 references
2. Create installer.exe
3. Create .ard
4. Register addon in B1
AddOnInstallAPI.dll has also changed between 2004 and 2005 versions. It should work without any changes but you better change your installer to avoid problems in following versions.
Are you using B1DE to generate your installer? You can download B1DE tools from B1 main page, SDK tools page.
Hope it helps
Trinidad.

Cant use colours in AI free version.stroke and fill options are not active either

cant use colours in AI free version.stroke and fill options are not active either

In the Trial version of Illustrator try this:
In the top right of your screen, choose 'Essentials' from the workspace menu.
Then from the same menu, choose Reset Essentials.
Next, click the Selection tool in the Tools panel (strip on the left side of your screen, it is the black pointer at the top).
Click on the object you want to change the stroke and fill colour for. Does it display with little handles around it (this is called bounding box)? E.g. can you tell it is selected?
You should see the Stroke and Fill options in the Control panel (top horizontal strip above your document), if the object you've selected is a path. But if for instance you selected as a placed photo, you won't see the Stroke and Fill options.
If possible take a screenshot of what you are trying to do, and we can be of more help hopefully.

How do I get rid of the new toolbar that was added by versions 20 and 21?

I have tried both versions 20 and 21 and both have the bugs below so I ended up having to re-install version 19:
1.) Versions 20 and 21 add a new toolbar that has nothing but a "Firefox" button on it - and no way to get rid of this toolbar is provided. It wastes far too much space on my laptop's screen - that button should have been put on one of the other toolbars or simply made part of the icon set that users can use to customize their menubar or other toolbars.
2.) That new toolbar is not customizable. Hence, I don't have the option of recovering screen space by moving everything from my menubar onto the new toolbar then hiding the menubar.
3.) The back, forward, and stop|reload buttons on my menubar no longer work. Moving them back to the navigation toolbar and showing that toolbar does not solve the problem. Nor can I right-click on a web page and select those functions from the context menu: they are permanently disabled there too.
4.) I can no longer right click on the menubar or a toolbar and get a context menu from which you I can pick a "customize" option - I can't get a context menu AT ALL. In order to customize things for versions 20 or 21, I first have to reinstall version 19, do the customizations, then reinstall version 20 or 21.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can also check for problems with the localstore.rdf file.
*http://kb.mozillazine.org/Corrupt_localstore.rdf

Using Adobe Photoshop CS2 version 9 and have updated it, but when stacking photos, it comes up with PSD, whereas I want Jpeg, and I change the format to Jpeg and the box then comes up with cannot save as there is a program error. Be very grateful for help

Using Adobe Photoshop CS2 version 9 and have updated it, but when stacking photos, it comes up with PSD, whereas I want Jpeg, and I change the format to Jpeg and the box then comes up with cannot save as there is a program error. Be very grateful for help with this, please.

jpg does not support Layers.
Just to make sure, what exactly do you mean by "stacking photos" and what do you want to achieve thereby?

EEM version 2 and above on Cisco 12404/PRP and cisco WS-C4503 Sup V

Similar Messages

Maybe you are looking for